nixon mission android wear battery replacement › pdf › i... · step 1 — battery remove 4...

Nixon Mission Android Wear BatteryReplacement

Disassemble Nixon Mission Android Wear for battery replacement.

Written By: Mauricio Ambrosio

Nixon Mission Android Wear Battery Rep… Draft: 2020-03-19Guide ID: 100634 -

This document was generated on 2020-04-03 10:36:24 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com of 6

INTRODUCTION

Batteries tend to lose capacity over time. This guide will show you how to replace the battery of yourNixon Mission Android Wear.

TOOLS:Phillips #00 Screwdriver (1)Spudger (1)




Step 1 — Battery

Remove 4 4.5mm Phillips headscrews from back side of watchusing PH00 Phillips head.

Step 2

Remove the back plate of watch.




Step 3

Unclip 5 latches from motherboardusing a plastic spudger.

Step 4

Remove the 2 3.0mm screws frommotherboard using PH00 Phillipshead.




Step 5

Carefully remove motherboard &internal screen.

Step 6

Remove from the motherboard theconnector with the four cables.

Pull the cables upward and themotherboard downward as shown inthe picture.




To reassemble your device, follow these instructions in reverse order.

Step 7

Carefully remove the battery fromthe watch.




nixon mission android wear battery replacement › pdf › i... · step 1 — battery remove 4...

Documents