no need to choose nine9 does it all! - caliber … spot drill_no.11.a.pdf · · 2016-01-31no need...

NC Spot DrillsCorner Rounding Cutters& Engraving Tools

NO NEED TO CHOOSENINE9 DOES IT ALL!

Chamfering

Center Drilling

Spotting

Counter sinking

Facing Turning

Engraving

Corner Rounding

Grooving

Cat. No. 11.a

Various applications of NC Spot Drill

We Focus: ● Higher efficiency ● Long tool life● Position accuracy ● Total cycle time

Multifunctional Cutting Tool

A new concept of drilling !

Universal, Easy handlingand Material saving!One holder to cover somany different applications!

Now and Future Traditional

0.5xD of spotting.“The high performance solid carbide drill or HSS drill with web thinning do not need any centering!”“Drilling from solid!” most of the drills manufacturers and suppliers quote that.However, if you applied NC Spot Drill to drill a spot which is half of the drilling diameter, you can look forward to the following benefi ts.

Benefi ts: ● Higher feed rate of drill! Why? Because the drill is guided at the strongest part of cutting edge. ● Better center position of drill! Why? Because the spotting is done by single cutting edge which is out of center, and similar to boring operation. ● Increase the tool life of drill!

Without Spotting 0.5xD Spotting Larger Spotting

Best result!Higher speed and feed rate.More accuracy of positioning and diameter tolerance.

Less positional accuracy of drill, and diameter tolerance.Lower feed rate.Unstable tool life.

Longer spotting time!Guided at the weakestcorner of drill.Shorter tool life.

Mini SpottingThe application of the engraving insertas a spotting drill for the minor size of drill.

Benefi ts: ● Best positioning accuracy! ● Better surface with spotting by NC Spot drill in advance.

Working example of spotting:Spindle speed: 3000-25000 r.p.m. Feed rate: 0.01-0.02 mm/rev. Tool : 99616-10-02SW

Without Spotting With Spotting

1

NC Spot Drill with Patentedindexable carbide insert.High Effi ciency! Low Cost!CNC Lathes, CNC Turning Centers and Machining Centers.

One tool will perform multiple applications.● Long tool life.● Each insert has four cutting edges.● Suitable for spotting, chamfering, grooving and engraving.● 45° / 60° / 82° / 90° / 100° / 120° / 142° angle for different applications.● Increase cutting speed with coated carbide inserts.

ALL IN ONE !!Turning Center

● Four in oneCNC Lathes

Machining Center

Rotary

Turning Turning

Rotary

Helical groove milling

Engraving

Grooving

Chamfer turning

Face grooving

Face groove milling

Internal turning

Spot drilling on end surface

Internal chamfering

Spot drilling

External and internalchamfering

Grooving

SpottingFacing

Engraving

ChamferingProfi le chamfering

Spotting

NC Spot Drills

2

Holder

Engraving Tools

NC Spot Drill

Angle Inserts Dmin.

Dmax. Page

45° 99619-V045 V04506T1W

60°99616-14...P60

99616-13V

99619-V082-3/8

99619-V082-5/8

99616-06-6

99616-14...

99616-14-M8

99616-22

99619-V06060°99616-10...SW

90° 99616-10...SW

99616-25-CT28

99616-10...

99616-10-M5

90°

82°

V06006T1W

N9MT080201W-60

N9MT080201W

TCMT2204

V08212T3

N9MT05T1

N9MT11T3

N9MT1704

0.45 2.1

2.7

1.1

2.0 P10

P10

P5

P50.45

0.25

0.25

P13

P17

P19

P20

142

143

223

254

N9MT11T3P60

6.2 P112

V9MT12T3

P12132

P1392

P1461

99616-06-6 N9MT05T1P1461

N9MT0802

P15102

Spotting

Cham

fering

Grooving

Engraving

Drilling

V0820802

*Open circle = suitable application, Filled circle = preferred application.

NC Spot Drill Application System

3

NC Spot Drill

Large Chamfering

Center Drilling

Corner Rounding

99616-14...RC

99616-22...RC

Special Application

Special requests are welcomed.

99616-16-25R

120°99616-20-120

P21174

100°99616-20-100

P21164

P25

P26

99616-18

P236

R1.0 P24

N9MT11T3RC (2 cutting edges)

N9MT1704RC (2 cutting edges)

N9MT11T3R (4 cutting edges)

99616-28

P2316

18

28

99616-14...PR

P273.152.0

N9MT11T3PR *Similar to DIN 332 R

＊Side grooving

99616-CT315

P8

N9MT1103CT

142°99616-20-142

P21184

N9MT11T3CT2T-H

142°99619-V142

P732

V1421604

N9MT11T3CT2T-H

N9MT11T3CT2T-H

HolderAngle Inserts Dmax. Page

P34

Spotting

Cham

fering

Grooving

Engraving

DrillingD

min.

R1.0

R4.0

R3.0

R3.0

R6.0

3.152.78

*DIN 332 A / DIN 332 B

2

＊

4

5

Patent Pending!Main Features

■ High Positive Rake AngleIndexable insert. Suitable for engraving all types of materials, such as plastic, non-ferrous metal, aluminum, carbon steel and stainless steel.

■ Multi-Side GrindingFull peripherally ground insert to ensure effi cient repeatability. It performs excellently without producing any burrs, especially in aluminum and stainless steel.

■ High Speeds, High Feed RatesDesigned to run at high speed, up to 20000 rpm. Feed rate 0.08mm (0.003”) / rev. apply to aluminum; 0.05mm (0.002”) / rev. apply to stainless steel. Reduces engraving cycle time!

■ EconomicalEach indexable insert has 2 cutting edges.No resharpening required. Tool length is unchanged. No need to reset after changing insert or cutting edge.Excellent repeatability!

■ ApplicationsUniversal for marking number and almost any character. 45° , 60° engraving inserts which can be used for marking serial numbers ; product codes ; dial scales ; signs ; logo outlines and almost any character which can be created by the NC programming system.

Yesterday

Engraving45°/60°

Our Claim: This is a revolutionary new concept of engraving tools with indexable carbide inserts.They offer you the ability to produce HIGH QUALITY ENGRAVING in most materials.The latest coated carbide grades help you to obtain higher speeds and feed rates,dramatically reducing your cycle times.

Engraving Tool V045 / V060

Low feedrate !

Now & Future

6

45 60

Feature: ● For 45, 60 degree engraving tools. ● K20F submicron grain carbide insert, high positive rake angle and ground relief angle for universal applications. ● Each insert has 2 cutting edges.

NC2071: ● TiN coated. Good for low carbon steel, stainless steel, non-ferrous metal and aluminum.

NC2032: ● TiAlN coated. Good for all kinds of steel 30°-50° HRC, alloy steel and cast iron.

Starter Kit

Code Parts No. Shank ø Angle Insert included Content

691201-4501 00-99619-V045-03K-71

6

45°V04506T1W06-2071

1 x holder1 x T7 Key3 x inserts

691201-4502 00-99619-V045-03K-32 V04506T1W06-2032

692202-6001 00-99619-V060-03K-7160°

V06006T1W06-2071

692202-6002 00-99619-V060-03K-32 V06006T1W06-2032

Inserts

Code Parts No. Angle Grade CoatingDimensions

Wmin. Wmax. Tmax.L S Re

0104501 V04506T1W06-207145° K20F

TiN6.35 2.0 0.2 0.4 2.1 2.0

0104502 V04506T1W06-2032 TiAlN

0106001 V06006T1W06-207160° K20F

TiN6.35 2.0 0.2 0.5 2.7 2.0

0106002 V06006T1W06-2032 TiAlN

● Other sizes also available upon request.

Re=0.2 Re=0.2

Indexable Engraving Tool 45°, 60°

Code Parts No. ød L Screw Key

691001 00-99619-V045-06 6 40NS-220440.8Nm

NK-T7

692001 00-99619-V060-06 6 40

● DC slim chuck for extended length, see page 37.

Holders

ødød

7

Feature: ● For spotting before drilling by 135° - 140° point angle high performance drill. ● 142 degree indexable spotting drills. Maximum diameter up to 32mm.

NC2071: ● K20F grade, TiN coated, high positive geometry, fully ground cutting edge and relief angle. ● Each insert has 2 cutting edges. ● Universal grade for all unhardened steel and cast iron.

V1420803-NC2071

V1421604-NC2071

Code Parts No. Grade CoatingDimensions

Dmax. Tmax.L S Re

0114201 V1420803-NC2071 K20F TiN 8 2.38 0.8 16 2.8

0114211 V1421604-NC2071 K20F TiN 14 4.76 1.2 32 5.5

Inserts

Code Parts No. Insert Type ød L Screw Key

696001 00-99619-V142-16 V1420803-NC2071 16 100 NS-30072 NK-T9

696002 00-99619-V142-32 V1421604-NC2071 25 120 NS-50125 NK-T20

Holders

Feature:

● Using spotting fi rst may increase higher speed and feed rate of the after drills.● Saving total machining time !● Longer tool life of the after drills. Money saving !● Higher accuracy of positioning and diameter tolerance !

NC2071

Feature: ● Very high cutting speed and feed rate.● Center drilling with indexable insert saves pre-setting time of tool change.● Create center holes similar to DIN 332 Form A and DIN 332 Form B. ( Match USA standard #3 & #4 Combined drills & Countersink) .● Carbide inserts provide for very long tool life.

NC2071: ● K20F grade, TiN coated, high positive ground cutting edge. ● Universal grade for carbon steel, alloy steel, stainless steel and casting iron. ● Each insert has 2 cutting edges.

Inserts


d1 d2 d3 b L1 (min.) L2 (min.)

018201 N9MT1103CT278-NC2071 K20F TiN 7/64” 0.264” 0.472” 0.029” 0.275” 0.304”

018203 N9MT1103CT318-NC2071 K20F TiN 3.15(1/8”)

6.7(0.264”)

10(0.394”)

0.9(0.035”)

5.9(0.232”)

6.8(0.268”)

Holders

Code Parts No. ød L Screw key

608001 00-99616-CT315-12 12 64 NS-300722.0 Nm NK-T9

608002 00-99616-CT315-16 16 100 NS-300722.0 Nm NK-T9

618002 00-99616-5/8-CT1/8 5/8” 4” NS-300722.0 Nm NK-T9

Workpiece material Vc (m/min.) f (mm/rev.)

Carbon Steel 80~150 0.03~0.05

Alloy steel 80~150 0.03~0.05

Stainless Steel 65~120 0.02~0.04

Cutting Data

High feedrate !Economical !

Low feedrate !Expensive !Form A Form B

● NC2032 grade for non-Ferrous metals are available on request.

● Base RPM on d1.

● Tool center alignment is critical, center height adjusting sleeve is available on request.

8

Application Examples

Application Example:

Now & the future! Yesterday!

For CenteringReplace HSS center drillwith Carbide Insert Increase cutting speed by 30 times

● Contour Chamfering on Machining Center.

● Spotting, Grooving, Engraving on Machining Center.

● Turning, Chamfering, Facing on CNC Lathes.

● Centering on Machining Center by PR Insert.

● 45° and 60° Engraving Tools.

■ Available shank diameter-Ø5, Ø6, Ø10, Ø12, Ø16, Ø20mm, Ø3/8”, Ø1/2”, Ø5/8”, Ø3/4”, M5, M6, M8■ Inserts are interchangeable.

Spotting, EngravingCenter Drilling Engraving 60°/90°

Centering, Turning Spotting, ChamferingGrooving

ChamferingCorner Rounding

New concept!New design!

● Cut a Serrated Workpiece.● Single Pass Each Direction.

9

60° / 90° SW

Code Parts No. Shankø

TotalLength Insert fi tted Dmax. Tmax.

603101-3404 00-99616-10-02SW-60

10 90

N9MT080201W-60-NC40 1.1 0.8

603101-3405 00-99616-10-02SW N9MT080201W-NC40 2.0 0.9

603101-3406 00-99616-10-02SWAL N9MT080201W-NC10 2.0 0.9

Features: ● 90° Indexable engraving insert with 4 cutting edges. ● No resharpening required. ● For marking all types of work pieces.

N9MT080201W-NC10 : ● Submicron carbide insert, TiAlN coated, for AI, AI-alloy, hardened steel 40-50°, Stainless steel.

N9MT080201W-NC40 : ● Submicron carbide insert, TiN coated, for all unhardened steel and cast iron, general purpose.

N9MT080201W-60-NC40 : ● Submicron carbide insert, TiN coated, very positive angle for 60° engraving for all kind of steel and cast iron.

Now & the future! Yesterday!


Dmax. Tmax.L S Re

013404 N9MT080201W-60-NC40 60° K20F TiN 8 2.38 0.1 1.1 0.8

013405 N9MT080201W-NC40 90° K20F TiN 8 2.38 0.1 2.0 0.9

013406 N9MT080201W-NC10 90° K20F TiAlN 8 2.38 0.1 2.0 0.9

Holders

Single Set ● User friendly, each set is fi tted with one complimentary insert.


603001 00-99616-10 10 90NS-300552.0 Nm NK-T8

613001 00-99616-3/8 3/8” 90

Starter Package ● Selected package for starter who wants to try Engraving Tool. ● Included one insert on tool holder and 5 inserts in the pocket. ● Total 6 inserts are equal to 24 engraving tools.

Code Parts No. Shank ø Insert included Content

603201-3404 00-99616-10-ME6SW-60 10 N9MT080201W60-NC401 tool holder + 6 inserts+ 1 key

603201-3405 00-99616-10-ME6SW 10 N9MT080201W-NC40

603201-3406 00-99616-10-ME6SWAL 10 N9MT080201W-NC10

ø10

NC10

Re=0.1

NC40

Re=0.1

60°-NC40

Re=0.1

Engraving Tool

Inserts

10

Feature: ● Fully ground spotting insert, for 60 degree spotting and engraving.

NC40: ● P35 grade, TiN coated. ● Each insert has 2 cutting edges.


Dmax. Tmax.L S Re

014204 N9MT11T3P60-NC40 P35 TiN 11 3.97 0.8 6.2 4

Features:● 60 degree spotting drill with indexable insert. ● Using standard NC Spot Drill shank. ● A single cutting edge design creates higher precision and position when spotting.

Applications: ● For spotting, engraving, small grooving on milling machines, machining centers. ● For carbon steel, alloy steel and cast iron, general purpose.


604002 00-99616-14-12 12 100NS-350802.5 Nm NK-T15

604004 00-99616-14 16 100

Dmax.

Tmax.

P60-NC40

Re=0.8

NC Spot Drill-N9MT11T3P6060°

Holders

ø16

Inserts

11

Feature: ● 60 degree indexable spotting insert, Dmax 13mm. ● Special geometry with supporting edges for using in high speed machining. ● Excellent tool for grooving, save machining time !

NC2071 : ● K20F grade, TiN coated, high positive ground cutting edge and relief angle. ● Universal grade for carbon steel, alloy steel and cast iron. ● Each insert has 2 cutting edges.

NC9076 : ● High positive geometry and sharpen edge. ● DLC coated, super good for Al, Al-alloy, copper, brass and bronze. ● Perform excellent surface on non-ferrous metal. ● Each insert has 2 cutting edges.

NC2071

NC9076

Dmax.

Tmax.


Dmax. Tmax.L S Re

015201 V9MT12T3CT-NC2071 K20F TiN12.7 3.97 0.8 13 11.7

015202 V9MT12T3CT-NC9076 K20F DLC

Features: ● 60 degree spotting drill with indexable insert. ● A single cutting edge creates higher precision and position when spotting.

Applications:● Spotting, engraving, grooving and chamfering on milling machines, machining centers. ● Spotting, facing on CNC Lathes.


605001 00-99616-13V 16 100 NS-350802.5 Nm NK-T15

615001 00-99616-13V-5/8 5/8” 100 NS-350802.5 Nm NK-T15



605101-5201 00-99616-13V-02S 16 100 V9MT12T3CT-NC2071 13 11.7

605101-5202 00-99616-13V-02SAL 16 100 V9MT12T3CT-NC9076 13 11.7

● User friendly, each set is fi tted with one complimentary insert.ø16

ø16

Re=0.8

Re=0.8

NC Spot Drill-V9MT12T3 60°

Holders

Single Set

Inserts

HOT

12

Feature: ● 82 degree indexable spotting insert. ● Match the geometry of Amercian standard screw hole. ● Special geometry with supporting edges for use in high speed machining.

NC2071 : ● K20F grade, TiN coated, high positive ground cutting edge and relief angle. ● Universal grade for carbon steel, alloy steel and cast iron. ● Each insert has 2 cutting edges.

NC9076 : ● High positive geometry and sharp edge. ● DLC coated, super good for Al, Al-alloy, copper, brass and bronze. ● Produces excellent surface fi nish on non-ferrous metals. ● Each insert has 2 cutting edges.


Dmax. Tmax.L S Re

0108201 V0820802-NC2071 K20F TiN 8 2.38 0.4 9 4.8

0108202 V0820802-NC9076 K20F DLC 8 2.38 0.4 9 4.8

0108211 V08212T3-NC2071 K20F TiN 12.7 3.97 0.8 14 7.5

0108212 V08212T3-NC9076 K20F DLC 12.7 3.97 0.8 14 7.5

NC2071

NC9076

max.

Dmax.

Tmax.

Features: ● 82 degree spotting drill with indexable insert. ● Special cutting edge design gives higher precision and position when spotting

Applications: ● Spotting, engraving, grooving and chamfering on milling machines, machining centers. ● Spotting, facing on CNC Lathes.

Code Parts No. Insert type ød L Screw Key

693001 00-99619-V082-3/8 V0820802 3/8” 90 NS-300552.0 Nm NK-T8

693002 00-99619-V082-5/8 V08212T3 5/8” 100 NS-350802.5 Nm NK-T15

Inserts

Holders

Re=0.8

Re=0.8

NC Spot Drill-V0820802 / V08212T382°

Ø3.8”

13

Features: Mini spotting drill with indexable insert, low cutting power required. Especially good for Swiss type automatic lathes and CNC lathes.

NC2071 : ● K20F grade, TiN coated, fully ground cutting edge and relief angle. ● Geometry with supporting edges to stable the cutting condition on low power machine. ● Each insert has 2 cutting edges, for carbon steel, alloy steel and cast iron.

NC9076 : ● High positive geometry and sharp edge. ● DLC coated, super good for Al, Al-alloy, copper, brass and bronze. ● Produces an excellent surface fi nish on non-ferrous metal. ● Each insert has 2 cutting edges.

Inserts

NC2071

NC9076


Dmax. Tmax.L S Re

011201 N9MT05T1CT-NC2071 K20F TiN5 1.8 0.2 6 3.5

011202 N9MT05T1CT-NC9076 K20F DLC

Holders

Features: ● Smallest indexable spotting drill holder. ● A single cutting edge creates higher precision and position when spotting.

Applications: ● Spotting, engraving, and chamfering on milling machines, machining centers. ● Spotting, facing on CNC Lathes.


601001 00-99616-06-6 6 35

NS-200360.8 Nm NK-T6601002 00-99616-06-5 5 35

601003 00-99616-06-6L 6 60

Re=0.2

Re=0.2

NC Spot Drill-N9MT05T1 90°

Mini SpottingMini Spotting

Note:601003 is carbide shank holder.

Ø5, Ø6

14

H-NC40 : ● Best choice for spotting application. ● Special geometry with supporting edges for use in high speed machining. ● Sharp edge good for long cutting chip metals, such as low carbon steel, stainless steel and Ti, Ti-alloy. ● Each insert has 2 cutting edges. H-NC9076 : ● High positive geometry and sharp edge. DLC coated, super good for Al, Al-alloy, copper, brass and bronze. ● Produces excellent surface fi nish when chamfering non-ferrous metals. ● Each insert has 2 cutting edges. NC40 : ● General purpose, universal grade for all unhardened steel and cast iron. ● Each insert has 4 cutting edges.

NC10 : ● High positive angle and fully ground cutting edge and relief angle. ● Universal grade for Al, Al-alloy, non-ferrous metal and stainless steel. ● Each insert has 4 cutting edges.


Dmax. Tmax.L S Re013201 N9MT0802CT2T-H-NC40 K20F TiN 8 2.38 0.8 10 4

013202 N9MT0802CT2T-H-NC9076 K20F DLC 8 2.38 0.8 10 4

013401 N9MT080208CT-NC40 K20F TiN 8 2.38 0.8 10 4

013402 N9MT080204CT-NC40 K20F TiN 8 2.38 0.4 10 4

013403 N9MT080204CT-NC10 K20F TiAlN 8 2.38 0.4 10 4

Features: ● Indexable spotting drill holders. ● Single cutting edge design gives higher precision when spotting.



603001 00-99616-10 10 90

NS-300552.0 Nm NK-T8

603003 00-99616-10-SL10 10 90

613001 00-99616-10-3/8 3/8” 90

623001 00-99616-10-M5 M5 25

623002 00-99616-10-M6 M6 25

Note: ● 603003 with side lock fl at on shank. ● Nine9 extension bar for M6 screw fi t holder, see page 37.

H-NC40

H-NC9076

NC40

NC10

Re=0.8

Re=0.8

Re=0.4Re=0.8

Re=0.4

NC Spot Drill-N9MT080290°

Inserts

Holders

15

Single Set



603101-3401 00-99616-10-02S 10 90 N9MT080208CT-NC40 10 4

603101-3403 00-99616-10-02SAL 10 90 N9MT080204CT-NC10 10 4

603101-3201 00-99616-10-H-02S 10 90 N9MT0802CT2T-H-NC40 10 4

613101-3401 00-99616-10-3/8-02S 3/8” 3.54” N9MT080208CT-NC40 0.394” 0.157”

613101-3403 00-99616-10-3/8-02SAL 3/8” 3.54” N9MT080204CT-NC10 0.394” 0.157”

Starter Package-90°

5 Pcs-Kit Package


603201-3401 00-99616-10-ME6 10 N9MT080208CT-NC40

1 tool holder + 6 inserts + 1 key

603201-3403 00-99616-10-ME6AL 10 N9MT080204CT-NC10

603201-3201 00-99616-10-H-ME6 10 N9MT0802CT2T-H-NC40

613201-3401 00-99616-10-IN6 3/8” N9MT080208CT-NC40

613201-3403 00-99616-10-IN6AL 3/8” N9MT080204CT-NC10

Ø10Ø3/8”

NC Spot Drill-N9MT0802 90°

● User friendly, each set is fi tted with one complimentary insert.

● Selected package for starter who wants to try NC Spot Drill.● Included one insert on tool holder and 5 inserts in the pocket. All kits are packed by blister card.● Total 6 inserts are equal to 24 spot drills.

● Economy pack for larger end users.● Do not miss it !

Shank Parts No. Contents

10 00-99616-10-05KIT 5 x tool holders+ 1 key3/8” 00-99616-3/8 PACK

~ Special ~ Special Offer ~ Offer ~~ Special Offer ~

16

H-NC40 : ● Best choice for spotting application. ● Special geometry with supporting edges for use in high speed machining. ● Sharp edge good for long cutting chip metals, such as low carbon steel, stainless steel and Ti, Ti-alloy. ● Each insert has 2 cutting edges.

H-NC9076 : ● High positive geometry and sharp edge same as grade H-NC40. DLC coated, super good for Al, Al-alloy, copper, brass and bronze. ● Produces excellent surface fi nish when chamfering non-ferrous metals. ● Each insert has 2 cutting edges. NC40 : ● General purpose, universal grade for all unhardened steel and cast iron. ● Each insert has 4 cutting edges.

NC10 : ● High positive angle and fully ground cutting edge and relief angle. ● Universal grade for Al, Al-alloy, non-ferrous metal and stainless steel. ● Each insert has 4 cutting edges.

NC60 : ● Cermet insert, fully ground cutting and relief angle, for hardened steel up to HRC55 . ● Each insert has 4 cutting edges.


Dmax. Tmax.L S Re014202 N9MT11T3CT2T-H-NC40 K20F TiN 11 3.97 0.8 14 7

014203 N9MT11T3CT2T-H-NC9076 K20F DLC 11 3.97 0.8 14 7

014401 N9MT11T3CT-NC40 P35 TiN 11 3.97 0.8 14 7

014402 N9MT11T3CT-NC10 K10F TiAlN 11 3.97 0.3 14 7

014403 N9MT11T3CT-NC60 CERMET 11 3.97 0.8 14 7

Features: ● Indexable insert spotting drill holders. ● The most wide range application of spotting drills for milling and turning operation. ● Holders and inserts are interchangeable.

Applications: ● Spotting, engraving, grooving and chamfering on milling machines, machining centers. ● Spotting, facing, turning on CNC Lathes.


604002 00-99616-14-12 12 100

NS-350802.5 Nm NK-T15

604004 00-99616-14 16 100

604007 00-99616-14-150L 16 150

604009 00-99616-14-220L 20 220

614001 00-99616-14-1/2 1/2” 4“

614002 00-99616-14-5/8 5/8” 4”

624001 00-99616-14-M8 M8 30

H-NC40

H-NC9076

NC40

NC10

NC60

Re=0.8

Re=0.8

Re=0.8

Re=0.3

Re=0.8

NC Spot Drill-N9MT11T390°

Inserts

Holders-90°

Max

ø14

Note: ● Nine9 extension bar for M8 screw fi t holder, see page 37.

HOT

17

5 Pcs-Kit Package


604202-4401 00-99616-14-12-ME612

N9MT11T3CT-NC40


N9MT11T3CT-NC10

604202-4402 00-99616-14-12-ME6AL N9MT11T3CT2T-H-NC40

604204-4401 00-99616-14-ME6

16

N9MT11T3CT-NC40

604204-4402 00-99616-14-ME6AL N9MT11T3CT-NC10

604204-4202 00-99616-14-H-ME6 N9MT11T3CT2T-H-NC40

614202-4401 00-99616-14-IN65/8”

N9MT11T3CT-NC40

614202-4402 00-99616-14-IN6AL N9MT11T3CT-NC10

Single Set-90°



604102-4401 00-99616-14-12-02S

12 100

N9MT11T3CT-NC40

14 7N9MT11T3CT-NC10604102-4402 00-99616-14-12-02SAL

604102-4202 00-99616-14-12-H-02S N9MT11T3CT2T-H-NC40

604104-4401 00-99616-14-02S

16 100

N9MT11T3CT-NC40

14 7604104-4402 00-99616-14-02SAL N9MT11T3CT-NC10

604104-4202 00-99616-14-H-02S N9MT11T3CT2T-H-NC40

614101-4401 00-99616-14-1/2-02S1/2” 4”

N9MT11T3CT-NC400.6” 0.275”

N9MT11T3CT-NC10614101-4402 00-99616-14-1/2-02SAL

614102-4401 00-99616-14-5/8-02S5/8” 4”

N9MT11T3CT-NC400.6” 0.275”

614102-4402 00-99616-14-5/8-02SAL N9MT11T3CT-NC10

Ø12Ø1/2”

Ø12Ø5/8”

● Selected package for starter who wants to try NC Spot Drill.● Included one insert on tool holder and 5 inserts in the pocket. All kits are packed by blister card.● Total 6 inserts are equal to 24 spot drills.

Starter Package-90°

NC Spot Drill-N9MT11T3 90°


Shank Parts No. Contents

16 00-99616-14-05KIT 5 x tool holders+ 1 key5/8” 00-99616-14-5/8 PACK

~ Special ~ Special Offer ~ Offer ~~ Special Offer ~

● Economy pack for larger end users.● Do not miss it !

18

Feature: ● 90 degree indexable spot drill insert, Dmax 22mm.

NC2071: ● K20F grade, TiN coated, high positive geometry, fully ground cutting edge and relief angle. ● Each insert has 2 cutting edges. ● Universal grade for all unhardened steel and cast iron.


Dmax. Tmax.L S Re

016201 N9MT1704CT-NC2071 K20F TiN 17 4.76 1.2 22 10

NC2071

Features: ● 90 degree spotting drill with indexable insert. ● A single cutting edge creates higher precision and position when spotting.



606001 00-99616-22 20 100NS-501255.5 Nm NK-T20

606002 00-99616-22-150L 25 150

Single Set



606101-6201 00-99616-22-02S 20 100 N9MT1704CT-NC2071

22 10

Ø20

Re=1.2

NC Spot Drill-N9MT170490°

Inserts

Holders


19

Ø25

Feature: ● For spotting diameter up to 25mm. ● Fully ground cutting edge and relief angle.

NC40: ● P35, TiN coated. ● Universal grade for carbon steel, alloy steel and cast iron. ● Each insert has 3 cutting edges.


Dmax. Tmax.L S

017301 TCMT220408CT-NC40 P35 TiN 20.83 4.76 25(0.98”)

12.2(0.48”)

NC40

Features: ● Large spotting diameter with indexable insert. ● Single cutting edge design gives high precision when spotting.

Applications: ● Spotting, and chamfering on milling machines, machining centers.


607001 00-99616-25-CT28 25 120NS-401003.8 Nm NK-T15

617001 00-99616-1-CT28 25.4 120

NC Spot Drill-TCMT2204 90°

Inserts

Holders

20

● For spotting before drilling by 118° point angle drill.● 60° chamfering.

● For aircraft 100° normal rivet hole and screw hole.

L

Max

ø16

ød

● For spotting before drilling by 135~140° point angle high performance drilling.

Feature: ● Special geometry with supporting edges to reduce the vibration in high speed machining.

H-NC40 : ● K20F grade, TiN coated. ● General purpose for all kinds of steel and cast iron. ● Each insert has 2 cutting edges. H-NC9076 : ● High positive geometry and sharp edge . ● DLC coated, specially developed for Al, Al-alloy, copper, brass and bronze. ● Produces excellent surface fi nish when chamfering non-ferrous metals. ● Each insert has 2 cutting edges.

H-NC40

H-NC9076


Dmax. Tmax.L S Re

014202 N9MT11T3CT2T-H-NC40 K20F TiN 11 3.97 0.8 15 7

014203 N9MT11T3CT2T-H-NC9076 K20F DLC 11 3.97 0.8 15 7

Re=0.8

Re=0.8

100°/120°/142° NC Spot Drill-N9MT11T3CT

Inserts

● 100 degree ● 120 degree ● 142 degree

L L

Max

ø17

Max

ø18

ød

ød

21

Features: ● Indexable insert spotting drill holders for 100°/120°/142° spotting. ● Reduces spotting time, increase tool life and position accuracy of the next drilling operation.

Code Parts No. Angle ød L Screw Key

604011 00-99616-20-100 100° 20

100 NS-350802.5 Nm NK-T15

604013 00-99616-20-120120°

20

614003 00-99616-3/4-120 3/4”

604014 00-99616-20-142142°

20

614004 00-99616-3/4-142 3/4”

Single Set-100°/120°/142°

Code Parts No. Angle Shank ø TotalLength Insert fi tted Dmax. Tmax.

604111-4202 00-99616-20-100-H-02S 100° 20 100

N9MT11T3CT2T-H-NC40

16.53 6

604113-4202 00-99616-20-120-H-02S120°

20 100 17 5

614103-4202 00-99616-3/4-120-H-02S 3/4” 4” 0.67” 0.196”

604114-4202 00-99616-20-142-H-02S142°

20 100 18.5 3

614104-4202 00-99616-3/4-142-H-02S 3/4” 4” 0.728” 0.118”

Ø20

Ø20Ø3/4”

Ø20Ø3/4”

Starter Package-100°/120°/142°

Code Parts No. Angle Shank ø Insert included Content

604211-4202 00-99616-20-100-H-ME6 100° 20

N9MT11T3CT2T-H-NC401 tool holder+ 6 inserts+ 1 key

604213-4202 00-99616-20-120-H-ME6120°

20

614203-4202 00-99616-3/4-120-H-IN6 3/4”

604214-4202 00-99616-20-142-H-ME6142°

20

614204-4202 00-99616-3/4-142-H-IN6 3/4”

100°/120°/142°NC Spot Drill-N9MT11T3

Holders-100°/120°/142°


● Selected package for starter who wants to try NC Spot Drill.● Included one insert on tool holder and 5 inserts in the pocket. All kits are packed by blister card.

Higher feed rate !

Better center position !

Longer tool life !

Note: ● ød 3/4” shank 100° NC spot drill is available on request.

22

Feature: ● Patented square insert, each insert has 4 cutting-edges.● Special wiper design to create better-fi nished surface, increasing feed rate double.

N9MT11T308LA -NC40 : ● Carbide insert, TiN coated. Good for all kinds of steel and cast iron.

N9MT11T308LA -NC10 : ● Carbide insert, very positive angle. Good for Al, Al-alloy and non-ferrous metal.

N9MT11T308LA -NC60 : ● Cermet insert. Good for hardened steel, up to HRC55°.


L S Re

014409 N9MT11T308LA -NC40 P35 TiN 11.11 3.97 0.8

014410 N9MT11T308LA -NC10 K10F TiAN 11.11 3.97 0.3

014411 N9MT11T308LA -NC60 Cermet 11.11 3.97 0.8

NC40

NC10

NC60

Four Cutting edges

N9MT XX, f=0.3mm/revwith wiper

Features:

● 99616-28 can be applied for machining bottom chamfering and side grooving.

Code Parts No. C ød L Screw Key

604017 00-99616-18 ø6-ø1820 120 NS-35080

2.5 Nm NK-T15604018 00-99616-28 ø16-ø28

Re=0.3

Re=0.8

Re=0.8

Large Chamfering Tool with indexable insert308LA

Inserts

Holders

99616-18

99616-28

23

24

Features: ● Each insert has four cutting edges.● Various corner radius inserts can fi t on same holder.● Carbide insert can stand very long tool life.

N9MT11T3RXX-NC40 : ● Carbide insert, P35, TiN coated, for steel and cast iron, general purpose.● Inserts are CNC ground for precision radius location.

Now &the future!

Yesterday!

Code Parts No. Grade Coating Corner radius(R)

Tool radiusoffset ( r )

DimensionsL S

014404 N9MT11T3R10-NC40 P35 TiN 1.0 9.25 11.11 3.97

014405 N9MT11T3R15-NC40 P35 TiN 1.5 9.5 11.11 3.97

014406 N9MT11T3R20-NC40 P35 TiN 2.0 9.75 11.11 3.97

014407 N9MT11T3R25-NC40 P35 TiN 2.5 10 11.11 3.97

014408 N9MT11T3R30-NC40 P35 TiN 3.0 10.25 11.11 3.97

Features:

● Center of radius of each tool is dedicated. ● Tool offset can be set after measuring tool length by tool presetter or Z-Zero Setter.


604015 00-99616-16-25R 16 100 NS-350802.5 Nm NK-T15

Corner Rounding Cutter R

Inserts

Holders Ø16

25

Features:● Each insert has two cutting edges.● Higher cutting speed and feed rate.● Various corner radius inserts can fi t on same holder.● Combination corner rounding and 45° chamfering application on same insert.● Carbide insert can stand very long tool life. ● Very small X offset, good for contour chamfering.

N9MT11T3RCXX-NC40 ● Submicron carbide insert, K20F, TiN coated, universal design for all kinds of materials.● Inserts are CNC ground for precision radius location.

Now &the future! Yesterday!


offset DimensionsX Y Z L S

014209 N9MT11T3RC10-NC40 K20F TiN 1.0 2.75 1.5 2.5 11.11 3.97

014210 N9MT11T3RC15-NC40 K20F TiN 1.5 3.25 1.5 3 11.11 3.97

014211 N9MT11T3RC20-NC40 K20F TiN 2.0 3.75 1.5 3.5 11.11 3.97

014212 N9MT11T3RC25-NC40 K20F TiN 2.5 4.25 1.5 4 11.11 3.97

014213 N9MT11T3RC30-NC40 K20F TiN 3.0 4.75 1.4 4.4 11.11 3.97

014214 N9MT11T3RC1/64-NC40 K20F TiN 1/64 0.086” 0.059” 0.0747” 0.437” 0.156”

014215 N9MT11T3RC1/32-NC40 K20F TiN 1/32 0.101” 0.059” 0.090” 0.437” 0.156”

014216 N9MT11T3RC1/16-NC40 K20F TiN 1/16 0.133” 0.059” 0.122” 0.437” 0.156”

014217 N9MT11T3RC3/32-NC40 K20F TiN 3/32 0.164” 0.059” 0.153” 0.437” 0.156”

014218 N9MT11T3RC 1/8-NC40 K20F TiN 1/8 0.199” 0.055” 0.180” 0.437” 0.156”

Features:

● For corner rounding using NC Spot Drill shank.● Good for small work pieces.● Same insert can also be used to produce a 45 degree edge chamfer.


604002 00-99616-14-12 12 100

NS-350802.5 Nm NK-T15

604004 00-99616-14 16 100

614001 00-99616-14-1/2 1/2” 4”

614002 00-99616-14-5/8 5/8” 4”

Corner Rounding CutterRC

Inserts

Holders


26

Features:● Higher cutting speed and feed rate.● Various corner radius inserts can fi t on same holder.● Combination corner rounding and 45° chamfering application on same insert.● Carbide insert can stand very long tool life.

N9MT1704RCXX-NC2071 : ● Submicron carbide insert, K20F, TiN coated, universal design for all kind of materials.● Inserts are CNC ground for precision radius location. ● Each insert has two cutting edges.

R

Z Y

X


offset DimensionsX Y Z L S

016202 N9MT1704RC40-NC2071 K20F TiN 4.0 5.95 2 6 17 4.76

016203 N9MT1704RC50-NC2071 K20F TiN 5.0 6.90 2 7 17 4.76

016204 N9MT1704RC60-NC2071 K20F TiN 6.0 7.90 2 8 17 4.76

Now &the future!

Yesterday!

Features:

● For corner rounding using NC Spot Drill shank. ● Good for small work pieces, which need large corner rounding. ● 45 degree chamfering is available by using straight position of cutting edge.


606001 00-99616-22 20 100NS-501255.5 Nm NK-T20

606002 00-99616-22-150L 25 150

Corner Rounding Cutter RC

Inserts

Holders


Features:● Very high cutting speed and feed rate.● Center drilling with indexable inserts.● Create center holes similar to DIN 332 Form R, R2.0, 2.5 and 3.15 mm. ● Different dimension inserts are interchangeable on same holder.● Carbide insert can stand very long tool life. ● Indexable insert saves pre-setting time of tool change.

N9MT11T3PRXX-NC40 :● Carbide insert, P35, TiN coated, for all steel and cast iron, general purpose.● Each insert has two cutting edges.● Radius curve eliminates the sharp transition from drill point to countersink angle. The risk of breakage is reduced.

Code Parts No. Grade Coating Rotation Dimensionsd D L L1 Re

014205 N9MT11T3PR20-NC40

P35 TiN

CW 2.0 5.4 2.7 3.3 0.8

014206 N9MT11T3PR25-NC40 CW 2.5 5.9 3.0 3.7 0.8

014207 N9MT11T3PR30-NC40 CW 3.15 6.4 3.3 4.0 0.8

014208 N9MT11T3PL30-NC40 CCW 3.15 6.4 3.3 4.0 0.8

NC40

Dimensions of the center holedrilled by PR center drilling inserts.

Now &the future!

Yesterday!

Turning and Centering Capacity on CNC Lathes

Center Drilling

Features:

● For center drilling on any type of machine. ● For external turning and facing on lathes as well.


604002 00-99616-14-12 12 100 NS-350802.5 Nm NK-T15

604004 00-99616-14 (*PR) 16 100

*Especially holder for PR inserts.

Center drilling by Nine 9 PR insert, spindle speed: 6000 r.p.m.Feed rate: 1800 mm/min.It is 30 times more thanHSS center drill.

NC Spot Drill-N9MT11T3PRPR

Inserts

Holders

27




604102-4205 00-99616-14-12-PR20-02S

12 100

N9MT11T3PR20 2.0 2.7

604102-4206 00-99616-14-12-PR25-02S N9MT11T3PR25 2.5 3.0

604102-4207 00-99616-14-12-PR30-02S N9MT11T3PR30 3.15 3.3

604104-4205 00-99616-14-PR20-02S

16 100

N9MT11T3PR20 2.0 2.7

604104-4206 00-99616-14-PR25-02S N9MT11T3PR25 2.5 3.0

604104-4207 00-99616-14-PR30-02S N9MT11T3PR30 3.15 3.3

Ø12, Ø16


604202-4205 00-99616-14-12-ME6PR20

12

N9MT11T3PR20-NC40


604202-4206 00-99616-14-12-ME6PR25 N9MT11T3PR25-NC40

604202-4207 00-99616-14-12-ME6PR30 N9MT11T3PR30-NC40

604204-4205 00-99616-14-ME6PR20

16

N9MT11T3PR20-NC40

604204-4206 00-99616-14-ME6PR25 N9MT11T3PR25-NC40

604204-4207 00-99616-14-ME6PR30 N9MT11T3PR30-NC40

Features:● Selected package for starter who likes to try Center Drilling.● Included one insert on tool holder and 5 inserts in the pocket. All kits are packed by blister card.

NC Spot Drill-N9MT11T3PR PR

Starter Package

Single Set

28

Engraving depth “ t ”

Eng

ravi

ng w

dith

“ w

”

Cutting Data

● The bottom of the engraving is fl at, minimum engraving depth (t) of 0.05 mm (0.002”) is recommended.

● To use the engraving chart, select your engraving width (w) on the vertical axis. Select your engraving insert angle (45° or 60°), and follow the horizontal line from the (w) axis to the intersection with the insert angle. Follow the vertical line from this intersection point to the engraving depth (t) axis to determine the engraving depth.

Attention!

1. Setting-up the tool holder: ● The engraving tool shank runout should be below 0.02 mm (0.0008”). Shrink fi t chucks, hydraulic chuck and high precision spring collet chucks are recommended. ● Pre-balance the tool holder: G6.3/10,000 R.P.M. is recommended.

2. Clamping the engraving insert: Place and hold the insert in the insert pocket against the positioning side. See illustration below:

3. Selecting the speed and feed rate: Select the spindle speed and feed rate according to the selected material’s cutting data. The downward feed rate of the Z-axis should be reduced to 50-70% of the table feed rate.

4. Cutting fl uid and cooling condition: ● Elmusion is recommended for engraving on steel, stainless steel, Al and Al-alloy. ● Blown cooled air is recommended for engraving on cast iron and plastic.

Work Material S RPM f (mm/rev.) Grade of InsertStainless Steel 5000~20000 0.02~0.05 NC2071

Steel< 30˚HRC 5000~20000 0.02~0.05 NC2071

30˚-50˚HRC 5000~20000 0.01~0.02 NC2032

Cast iron 5000~20000 0.01~0.02 NC2032

Aluminum, Non-Ferrous Metal 5000~20000 0.02~0.08 NC2071

PMMA, POM (Plastic) 5000~20000 0.02~0.08 NC2071

Depth / Width Chart Instructions and Cutting Data of Engraving Tools

w

29

Depth of Spotting “ t ”

Dia

met

er o

f Spo

tting

“ d

”

1. From Spot diameter “d” to get drill depth “ t ”.2. Point angle “α” is decided by which tool holder you use.3. From “d” draw a horizontal line to get intersection of the line by point angle “α”.4. From the intersection draw a vertical line to the bottom to have depth of spotting “ t ”. “ t ” is the drill depth of the NC program.5. The sectional view of spotting will depend on the shape of insert, NC40 and other grade of inserts have different sectional view.6. For chamfering, do not use tip of insert, 1mm(0.04”) minimum clearance is required for a smooth surface fi nish.

1. Using your “d” value and cutting speed Vc(SFM) from the data sheet (reference page 31), calculate spindle speed “S”(RPM).2. Feed rate per minute F=f x S=RPMxIPR

Metric

F=fxS

Vc X 1000 X D

D= Diameter -mmS= Spindle speed -r.p.m.Vc= Cutting Speed -m/min.f = mm/rev.F= mm/min.

inch

S=RPM=(3.82xSFM)/D

F=IPM=RPMxIPR

D= Diameter(inch)S=RPM=Revolutions per Minute(Spindle Speed)SFM= Surface Feet per MinuteSFM=Vc (m/min.)x3.28 IPR=f/25.4 - inches Per RevolutionF=IPM= inches Per Minute(Feed)

S=

Diameter/Depth Chart and Speed/Feed Rate Calculation of NC Spot Drill

Instruction of Use

Calculate Spindle Speed

30

Determine spindle speed and feed rate: ● Choose spotting depth to decide spotting diameter according to the Diameter/Depth chart of page 30. ●The spindle speed should be calculated by the maximum diameter of spotting, chamfering and grooving.

Work Material Vc (m/min) f (mm/rev.) Grade of Insert

Carbon Steel 150~250 0.05~0.10 NC40, H-NC40

Alloy Steel 100~200 0.04~0.06 NC40, H-NC40

Stainless Steel 65~125 0.03~0.06 NC10, NC60, H-NC40

Non-Ferrous Metal (Al, copper) 150~300 0.05~0.10 NC10, H-NC9076

Cast iron 80~150 0.05~0.10 NC40, NC10

Ti, Ti-alloy 60~80 0.03~0.06 H-NC40

* For technical construction reasons, the insert is not located on the center of the holder.* Inserts with supporting edges can increase feed rate 50%. (ex:NC2071, NC9076, H-NC40 type)






Cast iron 150~250 0.15~0.25 NC40, NC10

Ti, Ti-alloy 60~80 0.03~0.06 H-NC40






Cast iron 80~150 0.05~0.08 NC40, NC10

Ti, Ti-alloy 60~80 0.03~0.06 H-NC40

* NC2071, NC9076, H-NC40 type can increase feed rate 20%.

Engraving: Width of engraving=diameter of cutting=”d” Depth of engraving=depth of cutting=”T”

■For α = 90° insert, d=2xT ■For α = 60° insert, d=1.73xT


All Kind of Steel, unhardened, Cast iron 20~80 0.01~0.02 NC40

Non-Ferrous Metal 20~100 0.01~0.02 NC10

Hardened SteelHRC 40-50° 20~80 0.01~0.02 NC10

Attention:The calculated result “d” is only for calculation of spindle speed.

NC Spot Drill Cutting Data

N9MT-CT Insert

Centering

Chamfering

Grooving

Multi-function Insert

N9MT-W Insert Engraving Insert

31

Workpiece material Vc (m/min) f (mm/rev.) Grade of InsertCarbon Steel 120-150 0.05~0.10 NC40

Alloy Steel 100-120 0.04~0.08 NC40

High alloy steel, Hardened steel <HRC40° 60-80 0.03~0.06 NC40

Hardened steel HRC40°-55° 60-80 0.05~0.10 NC40

Stainless steel 50-60 0.03~0.06 NC10

Gray cast iron 80-100 0.05~0.10 NC40

Aluminum, AI-alloy Si < 12% 200-250 0.05~0.10 NC10

Al-alloy Si >12% 150-200 0.05~0.10 NC10

Copper 200-250 0.05~0.10 NC10

Brass and Bronze 150-200 0.05~0.10 NC10

Vc X 1000d X S= r.p.m.

F = S x f mm/min.

α = point angle 90°d = effective diameter, = 2xrVc = cutting speed m/min. or ft./min.S = Spindle speedf = feed per rev. mm/rev.

Recommended cutting speed for different materials:

45° Chamfering

N9MT11T308

Center Drilling PR

N9MT-PR Insert

45° Chamfering Tool

Center Drilling Insert

■ Turning and Centering

Center Drilling

■ Center Drilling

Recommended cutting speed for different materials:

Workpiece material Vc (m/min.) f (mm/rev.) Grade of insert

Carbon Steel 80-150 0.05-0.20 NC40

Alloy steel 80-150 0.05-0.20 NC40

High alloy steel 80-150 0.05-0.20 NC40

Gray cast iron 80-150 0.05-0.20 NC40

Aluminum, AI-alloy Si < 12% 150-300 0.05-0.20 NC40

Al-alloy Si >12% 150-250 0.05-0.15 NC40

Copper 200-250 0.05-0.20 NC40

Brass and Bronze 150-250 0.05-0.20 NC40

Chamfering Tool Cutting Data

ap

r

32

Determine spindle speed and feed:To decide running speed of the tools and feed rate, please calculate spindle speed andfeed rate according to the following formula and cutting data:

d = 2 x X mmd = 2 x r mm

Vc X 1000d X S= r.p.m.

F = S x f mm/min.

d = diameter of the tool for calculation purposeX = tool radius offset (ref. page 25~26 for RC inserts)r = tool radius offset (ref. page 24 for R inserts)Vc = cutting speed m/min.S = Spindle speedF = Feed ratef = feed per rev. mm/rev.

TL=TL’-Y, H = X or r

X = tool radius offset (ref. page 25~26 for RC inserts)r = tool radius offset (ref. page 24 for R inserts)Y = distance to the center of radius. (page 25~26 for RC inserts)TL’ = tool lengthTL = tool length offsetH = tool radius offset

R Insert

Recommanded cutting speed for different materials:


Carbon Steel 120~150 0.05~0.10 NC40

Alloy steel 100~120 0.04~0.08 NC40

High alloy steel 60~80 0.03~0.06 NC40

Hardened steel <HRC40° 60~80 0.03~0.06 NC40

Stainless steel 50~60 0.03~0.06 NC40

Gray cast iron 80~100 0.05~0.10 NC40

Aluminum, AI-alloy Si < 12% 200~250 0.05~0.10 NC40

Al-alloy Si >12% 150~200 0.05~0.10 NC40

Copper 200~250 0.05~0.10 NC40

Brass and Bronze 150~200 0.05~0.10 NC40


Carbon Steel 80~150 0.05~0.10 NC40

Alloy steel 80~150 0.05~0.10 NC40

High alloy steel 80~150 0.04~0.08 NC40

Hardened steel <HRC40° 60~80 0.04~0.08 NC40

Stainless steel 60~100 0.05~0.10 NC40

Gray cast iron 80~150 0.05~0.10 NC40

Aluminum, AI-alloy Si < 12% 150~300 0.05~0.10 NC40

Al-alloy Si >12% 150~250 0.05~0.10 NC40

Copper 200~250 0.05~0.10 NC40

Brass and Bronze 150~250 0.05~0.10 NC40

Corner Rounding Tool Cutting DataN9MT-R Insert N9MT-RC Insert Corner Rounding Tool

Calculate spindle speed

Calculate tool length offest on machining center

Corner Rounding R Insert

Corner Rounding RC Insert

33

Special

8 mm end milling, face milling(High postive)

2 mm grooving, depth 4 mm Drilling and milling a groove

Pitch 0.5-3 mm thread turningexternal

Ordering Code Various Applications

N9MT11T3FH-NC2031 8 mm end milling, face milling(High postive)

N9MT11T3T-NC2031 Pitch 0.5-3 mm thread turningexternal

N9MT11T3G-NC2031 2 mm grooving, depth 4 mm

N9MT11T3E-NC2031 Drilling and milling a groove

*Special insert and holder are available on request.

Special Request Form for NC Spot Drills

□Spotting □Drilling□Chamfering

□Milling

□Engraving

□Turning

Dia: Length: Shank:

□Facing

□Others:

Job:

Holder:

Working Material : ISO code or DIN code:

Sketch of working pieces:

34

Application System

External and internal chamfering

Grooving

Centering Facing Chamfer turning

Rotary

Turning Turning

Rotary

Face grooving

Face groove milling

Internal turning

Internal chamfering

Grooving

Engraving

Spot drilling on end surface

Helical groove milling

Spot drilling Chamfering

Engraving

Profile chamfering

Centering

Machining Center CNC Lathe Drilling Machine

Centering Centering Centering Centering Center Drilling

Chamfering Chamfering Chamfering Chamfering Chamfering

Engraving Facing Engraving Engraving

Grooving Grooving Grooving Groove Milling

Turning Facing

Center Drilling

Turning

Groove Milling

Four in one

Turning Center CNC Lathes

Machining Center

External and internal chamfering

Bottom chamfering

Side chamfering

Side grooving

Turning Center Milling Machine

NC Spot Drill can be used on various machines types.

NC Spot Drill

35

Application System

Centering Chamfering Engraving Center Drilling Turning Facing Grooving

45° DIN332 R2.0 Internal Face Spotting V-Grooving 30° 45° Radius

60°

90°

DIN332 R2.5 External Face Grooving Side Grooving Internal Internal R1.0

DIN332 R3.15 Chamfer Turning External External R1.5

82°

60°

90°

100°

120°

142°

Profile Profile R2.0

Bottom R2.5

R3.0

NC Spot Drill can be used for various applications.

NC Spot Drill

R1/64

R6.0

R5.0

R4.0

R1/32

R1/16

R3/32

R1/8

36

Extension Bar For NC Spot Drill

Ordering Code Type of Holder d L L1 øD D1 θ Collet Hexagon Key Back Screw Stop Screw Stop Nut0-329090-212 ST12-DC6-120 2~6 120 40 12 13 -- DC6

0-301940~642

M5 * L95 -- TP-M12

-222 ST16-DC6-150 2~6 150 38 16 13 3° DC6 M5 * L100 OP-M10 --

-232 ST20-DC6-200 2~6 200 70 20 13 3° DC6 M5 * L100 OP-M10 --

-242 ST25-DC6-250 2~6 250 115 25 13 3° DC6 0-301940~643 M5 * L100 OP-M10 --

0-329090-312 ST20-DC8-150 3~8 150 28 20 19 2° DC80-301940~652

M6 * L72 OP-M12 --

-322 ST20-DC8-200 3~8 200 28 20 19 2° DC8 M6 * L120 OP-M12 --

0-329090-412 ST25-DC10-150 3~10 150 28 25 24 2° DC10

0-301940~662

M8 * L80 OP-M16 --

-422 ST25-DC10-200 3~10 200 28 25 24 2° DC10 M8 * L100 OP-M16 --

-432 ST25-DC10-250 3~10 250 28 25 24 2° DC10 M8 * L150 OP-M16 --

DC6-E DC8-E DC10-E

Ordering Code

Size(mm)

Ordering Code

Size(mm)

Ordering Code

Size(mm)

0-300090-203 3.0 0-300090-303 3.0 0-300090-403 3.0

0-300090-204 4.0 0-300090-304 4.0 0-300090-404 4.0

0-300090-206 6.0 0-300090-306 6.0 0-300090-406 6.0

0-300090-308 8.0 0-300090-408 8.0

0-300090-410 10.0

Type DC6 DC8 DC10D 9.6 15 19.1

L 36 45 52

Spotting90° Engraving (P.14)

45° Engraving Tool (P.6) 60° Engraving Tool (P.6)

NC Spot Drill 99616-10-M6 (P.15)

99616-14-M8 (P.17)

DC Slim Chuck

Solid Carbide Extension Bar

4D

● TiN coated to indentify the efficient length

Order No. Part No. øD T L M00-99801-12W BC12-100M06W 12 60 100 M6xP1.0

00-99801-14W BC14-120M08W 14 70 120 M8xP1.25

00-99801-16W BC16-150M08W 16 80 150 M8xP1.25

37

ø7mm

Actualsize

Smallest in the world

04 mm

New Nine9 chamfer mill is designed for chamfering and countersinking with an indexable insert.The insert is a specifically designed for use in high speed machining ; the multiple flutes provide for increased feed rate, optimizing performance and reducing cutting time.

*Smallest Indexable counter sink, diameter ø7 mm.

Backward Circular Chamfering

Backward Circular Chamfering

Countersink

Face milling

Chamfering

You can count on more Nine9 tools !45° indexable chamfer mill

I-Center New Indexable Center Drills

DIN 332 A+B, DIN 332 R, ø2.0mm ~ ø10mm

ANSI 60° Center Drill #2~#10

Special shape, extra long neck, combination type

Low feedrate !Expensive !

High feedrate !Economical !

Very high cutting speed and feed rate.Each insert has 2 cutting edges.Latest coated carbide inserts provide for very long tool life.Center drilling with indexable insert saves pre-setting time of tool change.

5/64 (#2) 7/64 (#3) 1/8 (#4) 3/16 (#5)

7/32 (#6) 1/4 (#7) 5/16 (#8) 3/8 (#10)

Shape ex:long neck Diameter ex:5.30mm Point angle ex:140º Combination

ex:

SpecialSpecial

Center+Faceing

2.00mm 2.50mm 3.15mm 4.00mm

5.00mm 6.30mm 8.00mm10.00mm

DIN 332 A+B, DIN 332 RDIN 332 A+B, DIN 332 R

A+B R

ANSI 60°ANSI 60°

60º

~ Coming soon! ~

~ Get ready to go! ~

38

● Super Power Drill and Super Drill

● High Speed Boring Tool

● NC-Spot Drill and Engraving Tool

● Power Mill

● Solid Carbide End Mill

● Tool Holder

Distributor:

2009.06. Cat. No.: NNS 11.a:1000 PC

no need to choose nine9 does it all! - caliber … spot drill_no.11.a.pdf · · 2016-01-31no need...

Documents