no slide · ppt file · web view · 2011-01-06new in 2007 edition and in...
TRANSCRIPT
CodeDataPlate.com
NAESA REGIONAL WORKSHOPPRESENTATION
A17 Code RequiredData Plates, Tags and Signs
by: John S. RearickCodeDataPlate.com
CodeDataPlate.com
New in 2007 edition and in a-2008
• 2.7.5.2.1 MRL Pit Signage• 3.18.6 Marking of HY Jack• 8.10.2.2.2 Governor• 8.10.4.1 Escalator Governor• 8.11 Requirements moved to 8.6 (‘08)• 8.9.2 Added Esc. Code Data Plate• Others in Parts 5, 6 and 7• Also changes for those enforcing NBCC (Canada)
CodeDataPlate.com
Violations• A17.1-2000 and later editions Part 8
• A17.3-1996 and later editions
8.6.1.6.7 Signs and Data Plates. Required signsand data plates that are damaged or missing shall berepaired or replaced.8.6.1.5 Code Data Plate8.6.1.5.1 A data plate that indicates the Codeand edition in effect at the time of installation and anyalteration (see 8.7.1.8) shall be provided. The data plateshall also specify the Code and edition in effect at thetime of any alteration and the applicable requirementsof 8.7.8.6.1.5.2 The Code data plate shall complywith 8.9.
3.5.6 Rail Lubricants and Lubrication Plate…A metal plate shall be securely attached to the car crosshead…
CodeDataPlate.com
Data Plates• A17.1 Requirements
– Counterweight Runby Data Plate– Crosshead Data Plate– Capacity Plate– Safety Marking Plate– Jack Marking Plate– Rail Lube Plate– Governor Marking Plate– Brake Marking Plates– Buffer Marking Plate
CodeDataPlate.com
More Data Plates• A17.1 Requirements (Continued)
– Plunger Gripper Marking Plate– Hydraulic Machine & Valve Data Plates– Escalator/Moving Walk Brake Data Plates– Chain Data Plates (Dumbwaiter)– Rack & Pinion Data Plate– Code Data Plate
• A17.3 Requirements– Rail Lube Plate– Capacity Plate
CodeDataPlate.com
Tags• A17.1 Tags
– Governor Rope Tag– Hoist Rope Data Tag– Acceptance Safety Test Tag– Resocketing Tag– Escalator Governor– Periodic Test Tags
• A17.3 Tags– Hoist Rope Data Tag– Chain Data Tag
CodeDataPlate.com
Signs• A17.1 Signs
– Bottom Car Clearances– Refuge Space on Top of Car Enclosure– Working Areas in the Car or on the Car Top– Working Areas in the Pit– Location of Equipment - Governor Servicing– Freight Car Signage– Anti-creep Operation– Fire Service Signage
CodeDataPlate.com
More Signs• A17.1 Signs (Continued)
– Emergency Brake Sign– No Jumper Sign adjacent to Bypass Switches– Escalator & Moving Walk Caution Signs– Additional (Esc. & M.W.) Signs
• A17.3 Signs– Freight Car Signs– Escalator Caution Signs– D/W “No Riders” Signs
CodeDataPlate.com
2.4.5 Counterweight Runby Data PlateA data plate permanently and securely attached shallbe provided in the pit, in the vicinity of the counterweightbuffer, indicating the maximum designed counterweightrunby. The data plate shall conform to 2.16.3.3,except that the letters shall be not less than 25 mm (1 in.)in height.
MAXIMUM COUNTERWEIGHT
RUNBY 24"
CodeDataPlate.com
2.6.5.2 (<‘04) or 2.7.9.2 (’S-05>)
Requirement 2.7.5.2 ( 2.7.9.2 in A17.1-2007) NEII-1 Ranges shown which is tighter than most manufactures'Custom ranges available on special order
Temperature Min. Max.
Relative Humidity 80%
Note: Approximate Plate size is 5.5" x 1.5" with .125" lettering.
TEMPERATURE-HUMIDITY DATA PLATE TEMPLATE - STANDARD
Ambient Air Requirements
Max.
13oC (55oF) 32oC (90oF)
codedataplate.com
CodeDataPlate.com
2.13.4.2.4 Door Operator Plate ● ●
NORMALREDUCED
●
DOOR OPERATOR DATA PLATESecondsSeconds
cdp ●
Door Operator Plate required when Re-Opening Device is altered/added
8.7.2.13 Door Reopening Device. Where a reopening device … is altered... requirementsshall apply: (a) requirement 2.13.4…2.13.4.2.4 Data Plate. A data plate conforming to 2.16.3.3
Instructions Provided
CodeDataPlate.com
2.16.3.2.2 and
3.16.3
For use for Hydralic elevators installed under A17.1b-1995 and earlier editions
● ●
F.P.M.
MANUFACTURED: BY:● ●
Note: Approximate Plate size is 7" x 2.75" with .125" lettering.
APPROVED
Work order # 1106-02
A17.1-1990 Rule 301.10 = speed is down direction and is not to include weight of plungerthis seems to be a clarification - the referance is still back to Section 207
RATED LOAD: RATED SPEED:
CROSSHEAD DATA PLATE
COMPLETE CAR WEIGHT: POUNDS
● ●
F.P.M.
MANUFACTURED: BY:
● ●
CROSSHEAD DATA PLATECOMPLETE CAR WEIGHT: POUNDS
DOWN SPEED:
POUNDSPLUNGER WEIGHT:
RATED LOAD:
RAIL LUBRICATION INSTRUCTIONS:
Under b-1995 and earlier
Under 1996 and later
● ●
POUNDS F.P.M.
NUMBER OF ROPES: IN.
MANUFACTURED: BY:RAIL LUBRICATION INSTRUCTIONS:
● ●
RATED BREAKING STRENGTH: POUNDS
the safety for the characteristics of the rail lubricant to be used.
DIAMETER:
RATED SPEED: COMPLETE CAR WEIGHT:
RATED LOAD: POUNDS
CROSSHEAD DATA PLATEA17.1 Req. 8.6.1.6.7
only
not in A17.3
Hydro
Traction
CodeDataPlate.com
Jack, Safety Plank & Capacity
Hydraulic (3.18.6)
Traction (2.17.14)
Marking of Hydraulic JackThe exposed portion of each hydraulic jack after installation shall be plainly marked in a permanent manner with the following:(a) the name or trademark by which the organization that manufactured the hydraulic jack can be identified(b) the manufacturer’s designation of the type or model(c) year of manufacture
Marking Plates for SafetiesA metal plate shall be securely attached to each safetyso as to be readily visible, and shall be marked in alegible and permanent manner with letters and figuresnot less than 6 mm (0.25 in.) in height indicating:(a) the type of safety, based on 2.17.5(b) the maximum tripping speed in m/s (ft/min) forwhich the safety is permitted(c) the maximum weight in kg (lb), that the safety isdesigned and installed to stop and sustain(d) the force in N (lbf) required to activate the safetyor rope releasing carrier, if provided(e) the manufacturer’s name or trademark
(07)
● ●
● ●
CAPACITY2500 POUNDS
CodeDataPlate.com
Other Hydraulic Markings3.19.1.4 Component MarkingsValves, fittings, and mufflers shall be pressure rated, and shall bear themanufacturer’s name or trademark by which the organization that manufacturedthe product can be identified and identification symbols to indicate the materialsand service designations for which the manufacturer’s rating applies.
3.19.4.4 Manual Lowering Valve…shall be provided and identified…. This valve shall be so marked to indicatethe lowering position.
3.19.2.5 Hydraulic Pipeline IdentificationA marking shall be applied, to accessible piping that is located outside theelevator machine room or hoistway, stating “Elevator Hydraulic Line” in lettersthat are at least 19mm (0.75 in.) high in a contrasting color. The marking shall bevisible after installation and applied at intervals not greater than …120 in..
CodeDataPlate.com
Safety Test Tag●
Date:
cdp ●
8.10.2.2.2 (ii)(1)(f) A metal tag with the rule number, test date, and name of the person/firm performing the test shall be attached to the releasing carrier or where the governor rope attaches to the safety.
Car Safety Test - 8.10.2.2.2Person or Firm Performing Test:
Acceptance Test
CodeDataPlate.com
Pull-thru
+Buffer
+Flex Hose Test Tag
By:
● ●
GOV PULL-THROUGH TEST █ BUFFER TEST █
HY FLEX HOSE █
INSTALLED █ TESTED █
JAN █ FEB █ MAR █ APR █ MAY █ JUN █ JUL █ AUG █ SEP █ OCT █ NOV █ DEC █
2007█ 2008█ 2009 █ 2010█ 2011█ 2012█
cdp
8.6.3.4.4 A test tag indicating the date when the pull-through test was performed shall be attached.
8.11.2.3.3 (e) After completion of the test (of the oil buffer), a metal tag, indicating the date of the test, together with the name of the person or firm who performed the test, shall be attached to the the test.
8.6.5.6 Flexible Hoses...shall be replaced not more than 6 years beyond the installation date. Existing hose assemblies that do not indicate an installation or replacement date shall be replaced….
CodeDataPlate.com
● ●
● cdp ●
DO NOT LUBRICATE
RAIL LUBRICATION INSTRUCTIONS:
● ●
● cdp ●
CONSULT MANUFACTURER OF THE SAFETY FOR THE CHARACTERISTICS OF THE RAIL LUBRICANT
TO BE USED
RAIL LUBRICATION INSTRUCTIONS:
For Roller Guides
For Slide Guides
A17.1 - 2.17.16 & A17.3 - 3.5.6A17.1 - 2.17.16 & A17.3 - 3.5.6
In A17.1-2000 and later editions this information must be on Crosshead Data Plate
CodeDataPlate.com
2.18.9 - Governor Plate● ●
TRIPPING SPEED: F.P.M.ROPE SIZE: IN. MATERIAL:CONSTRUCTION:PULL-THROUGH: POUNDSMANUFACTURED BY:
● ●
SPEED-GOVERNOR MARKING PLATE
8 X 25IRON
395
DO NOT LUBRICATE GOVERNOR ROPE
400
1/2
HAUGHTON
CodeDataPlate.com
Brakes Plates
• 2.19.3.3 • 2.24.8.5The brake setting andmethod of measurementshall be permanently andlegibly marked on thedriving machine.
The emergency brake shallbe provided with a markingplate indicating the range oftotal masses (car with attach-
ments and its load) for whichit is permitted to be used,the range of speeds at whichit is set to operate, and thecriteria such as rail lubricationrequirements that arecritical to the performance.
CodeDataPlate.com
Buffer Marking Plates● ●
● CDP ●
LOAD RATING: 6000 POUNDS
NUMBER OF SPRINGS: 2
BUFFER MARKING PLATE
STROKE: 2 1/2 INCHES
2.22.3.3
Every installed oil buffer shall have permanently attached thereto a metal plate, marked by the manufacturer in a legible and permanentmanner, indicating(a) the maximum and minimum loads and the maximum striking speeds for which the buffer has been rated for use in conformance with the requirements in 2.22 (b) the permissible range in viscosity of the buffer oilto be used, stated in Saybolt Seconds Universal at 38°C(100°F)(c) the viscosity index number of the oil to be used(d) the pour point in degrees Celsius (Fahrenheit) ofthe oil to be used(e) the stroke of the buffer in mm (in.)(f) the composition of the gas, if used(g) the name, trademark, or file number by whichthe organization that manufactured the product can beidentified(h) the certification marking in accordance with8.3.1.3
8 items
and
2.22.4.11
(for Oil Buffers)
2.22.2.3
CodeDataPlate.com
8.6.1.6.7 Check for any Missing or Damaged Signs and Data Plates
• Machine Room– Brake Plates– Governor Plate– Code Data Plate– Ambient Air Plate– Hydro Data Plates– Warning Signs
• Fire Service Signs
• Hoistway and Pit– Crosshead Data Plate– Rail Lube Instructions– Warning Signs– Safety Plank Plate– Buffer Plate– Counterweight Runby
• Freight & Capacity
CodeDataPlate.com
Inspection Tags
• Acceptance Tests– 8.10 Requirements– New Installations– Alterations
• Periodic– 8.11 Requirements– 8.11.1.6 Tag
– New under b-2008:• Testing moves to 8.6
CodeDataPlate.com
TN 02-3392Proposed revision to ASME A17.1 – 2000 requirements 8.11 for test tags as follows:8.11.1.6 Periodic Test Tags. A metal test tag with the test date; the requirement numberrequiring the test, the applicable code requirement(s) and date performed; and the nameof the person or firm performing the test; shall be installed in the machine room ormachine space for all Category 3 and 5 periodic tests for electric elevators and Category1, 3, and 5 tests for hydraulic elevators.8.11.2.3.1 Car and Counterweight Safeties.(b) For Type A safeties .......A metal tag shall be attached to the safety-releasing carrier in a permanent manner,giving the date of the safety test, together with the name of the person or firm whoperformed the test.8.11.2.3.3 Oil Buffers(e) After completion of the test, a metal tag, indicating the date of the test, together withthe name of the person or firm who performed the test, shall be attached to the buffer[Item 5.3.2(b)].8.11.3.2.4 Flexible Hose and Fitting Assemblies.Flexible hose and fitting assemblies shall be tested at the relief valve setting pressure fora minimum of 30 s. Any signs of leakage, slippage of hose fittings, damage to outer hosecovering sufficient to expose reinforcement, or bulging, or distortions of the hose body iscause for replacement. A metal tag indicating the date of the test and the name of theperson or firm who performed the test shall be attached to the hose assembly in apermanent manner (Item 2.17.2).Caution: If the motor protection or motor overloads trip during this test do NOT changethe adjustment or jumper the overloads. Damage to the motor can result from running themotor without adequate overload protection.
REASON: Clarification and consolidation of the requirementsfor periodic inspections and test tags. There are no category 3tests for electric elevators. The original intent was it to applyto category 1 and 5.
Public Review Draft June 2006 - A17.1-200xProposed Revisions - Page 27 of 197
CodeDataPlate.com
TN 02-33928.11.3.2.4 Flexible Hose and Fitting Assemblies.Flexible hose and fitting assemblies shall be tested at the relief valve setting pressure fora minimum of 30 s. Any signs of leakage, slippage of hose fittings, damage to outer hosecovering sufficient to expose reinforcement, or bulging, or distortions of the hose body iscause for replacement. A metal tag indicating the date of the test and the name of theperson or firm who performed the test shall be attached to the hose assembly in apermanent manner (Item 2.17.2).Caution: If the motor protection or motor overloads trip during this test do NOT changethe adjustment or jumper the overloads. Damage to the motor can result from running themotor without adequate overload protection.
REASON: Clarification and consolidation of the requirements forperiodic inspections and test tags…. The original intent was it toapply to category 1 and 5.
Public Review Draft June 2006A17.1-200x Proposed RevisionsPage 27 of 197
CodeDataPlate.com
Traction Elevator - Periodic Test REQ. TagPerson or Firm Performing Test:
Test Category: 1REQ. # Test Item Test Date
8.11.2.2.1 Car and CW Oil Buffer8.11.2.2.2 Car & CWT Safeties8.11.2.2.3 Car & CWT Governors8.11.2.2.4 Winding Drum Slack Rope Device8.11.2.2.5 Terminal Stopping Devices8.11.2.2.6 Emergency Operations FFS8.11.2.2.7 Standby Power Operation8.11.2.2.8 Door Closing Force & KE8.11.2.2.9 Broken Rope or Tape Switch8.11.2.2.10 E/E/PES checkout8.11.2.2.11 Ascending Car/Unintended
Motion Tests
CodeDataPlate.com
CodeDataPlate.com
Hydraulic Elevator - Periodic Test REQ. TagPerson or Firm Performing Test:
Schindler Elevator CorporationTest Category: 1
REQ. # Test Item Test Date8.11.3.2.1 Relief Valve & System
Pressure8.11.3.2.2 Cylinder & Pressure Piping8.11.3.2.3(a) Normal Terminal Stopping
Device8.11.3.2.3(b) Governors8.11.3.2.3(c) Safeties8.11.3.2.3(d) Oil Buffers8.11.3.2.3(e) Emergency Operation FFS8.11.3.2.3(f) Standby Power Operation8.11.3.2.3(g) Power Operation of Doors8.11.3.2.3(h) Terminal Speed Reducing8.11.3.2.3(i) Low Oil & RPR Protection8.11.3.2.4 Flexible Hose & Fitting8.11.3.2.5 Pressure Switch
cdp
CodeDataPlate.com
CodeDataPlate.com
CodeDataPlate.com
CodeDataPlate.com
Code Data Plates
• 8.9.1 Required Information– 8.10.1.2 Applicability of Inspection and Test Requirements
• 8.9.2 Location– Mainline or on Controller
(07) – Additional Plate for External Escalator Inspections• 8.9.3 Material and Construction
– ...shall remain permanently and readily legible.
CodeDataPlate.com
SECTION 8.9 Requirement 8.9 contains requirements for all new and existing equipment within the Scope of this Code.
8.9.1 Required Information Data plate shall be provided and maintained that shall indicate the Code to be used for inspections and tests (see 8.10.1.2). The data plate shall indicate the Code and edition in effect at the time of installation.
The data plate shall also indicate the Code in effect at the time of any alteration
codedataplate.com
INSTALLATION CODE: ASME A17.1a-1997CODE DATA PLATE
ALTERATION CODE: ASME A17.1a-2005
and indicate the applicable requirements of 8.7.
#REF!
codedataplate.com
8.7.2.11.5, 8.7.3.8, 8.7.3.24, 8.7.3.29, 8.7.3.30, 8.7.3.31.1, 8.7.3.31.2, 8.7.3.31.5, 8.7.3.31.8
SECT. 8.7 REQUIREMENTS COMPLIED WITH:
CodeDataPlate.com
Installation Code Edition• Original Installation Date
– Elevator Permit Date– Other Dates If Unknown
• Original Installation Code– Follows AHJ’s Effective Dates– Use ASME Effective Dates
• AHJ has no dates• No AHJ• GSA
– Format is the same as in Inspector’s Guide
CodeDataPlate.com
Equipment Without Alteration• Older Installations
– Use applicable adopted A-17.1 editions– Use locally adopted code/standards such as:
• Adopted A17.3- Edition• California CA Title 8 - Group 2• Ohio Bulletin 110 (Red Book)• Iowa 875-IAC Ch. 73• Massachusetts 524 CMR • Missouri 11 CSR 40-5.065• Pennsylvania PA 34 Ch. 7• Washington WAC 296-96 Min. Std.
– Use building code referenced A17.1 edition • New Installations
– Use applicable ASME edition as AHJ adopts
CodeDataPlate.com
Edition Sensitive Items(85 years of code)
• A17.3 applies from d-1986 through d-2000 to Part XII• Item 1.6 Car Emergency Signal there are 6 differences• Space Guards A17.1-1937 and later editions (also A17.3)• Static Control a-1988 and later editions• Glazing b-1989 and later editions & again in a-2005• Item 1.12/13 & 3.8 (Cab items) there are 16 differences• and 16 more relating to car & hoistway doors & gates• Door Restrictors b-1980, b-1983 and b-1989 differences• Hydro RPR required for installations under c-1986 and later• Fire Service b-1973, 1981, 1984, b-1989, 2000 and 2004
CodeDataPlate.com
CDP Flow ChartDetermine the Original Maufacturer and serial number of the base equipment.
Determine date of Manufacture from Cross Head Data Plate
Contacted Manufacturer to obtain the Installation Code
Order Proper Code Data Plate
Have there been Alterations?
No
Yes
Yes
No
Yes
Determine building construction period - estimate elevator install permit date
Determine the Modernization Installer and Date
START
Yes
No
Subtract time from permit to manufacture (6-18 months)
Determine code in effect from AHJ for the estimated permit date
Determine scope of alterations and the applicable alteration rules and the applicable alteration code edition
Install Code Data Plate on Controller or Main Line Disconnect
FINISH
CodeDataPlate.com
CodeDataPlate.com
Job Information
Web, e-mail, phone or fax
CodeDataPlate.com
Modernization Items - check those that apply and provide additional in blanks:Alteration to Hoistway: Ascending Car/unintended Movement Protection
Hoistway Ventilation Change in Number of Ropes
Mach. Room Access: Addition of Rope Equalizers
Mach. Rm. Alteration: Addition of Auxiliary Rope-Fastening Devices
Replace or alter Wiring Alteration to cwt:
Horizontal Slide Entrance(s) added Installation of or Alteration to Cwt. Roller Guides
Vertical Bi-Parting Entrance(s) Alteration to Car or Cwt. Buffers or Bumpers
Tracks and/or Hangers Replaced Alteration of Guide Rails, Supports and Fastenings
Interlocks Replaced Alteration to Machine, Motor or Sheaves
HW Access and/or Unlocking Device Alteration Change in location of Driving Machine
Door restrictors added Alteration to Terminal-Stopping Devices
Door Operator added or altered Addition of or alteration to Top of Car Operating Device
Door Re-Opening devise added or altered Addition of or alteration to Car leveling or Truck-Zoning Device
Complete New Cab Change of Main Power Supply
Remodel Existing Cab: Controller change
Alteration of Car Frame or Platform Change in Type of Motion Control (AC, DC, VV, SCR, etc.)
Installation of or Alteration to Car Roller Guides Change in Type of Operation Control (Car Sw., Automatic, etc.)
Increase/Decease Deadweight of Car more than 5% Charge to Emergency Operations or Signaling devices
Change in Type of Service Installation of new Hydraulic Jack
Change in Class of Loading Install or alter Plunger
Change to carry Passengers on Freight elevator Install, alter or sleeve Cylinder
Increase in Rated Load Increase Working Pressure
Increase or Decrease Travel Change location of Hydro Jack
Increase in Rated Speed Relocation of Hydraulic Machine to below top of Cylinder
Decrease in Rated Speed Installation of Plunger Gripper
Replace or install New Car Safety Change to Valves, Pressure Piping & Fittings
Replace or install New Cwt. Safety Install or alter Tank
Alter Existing Car or Cwt. Safety Alter Anti-Creep Leveling device
Alter or install New Speed Governor Install or alter Emergency Lowering
Other items modernized, comments or any additional Information:____________________________________________________________________________________________________________________
CodeDataPlate
OrderForm
CodeDataPlate.com
Common Errors - Disconnect• Change in Power Supply = 8.7.2.27.3 or 8.7.3.31.4
– Change of Voltage, Frequency or Number of Phases – Change from DC to AC– Change of combination of DC and AC
• Replace Wiring or Disconnect = 8.7.2.8 or 8.7.3.8– Includes new machine room wiring, hoistway wiring
and travelling cables– Requires conformance with Section 2.8 which includes
reference to NFPA 70 (NEC)
CodeDataPlate.com
Common Errors - Control 8.7.2.27• Install like Controller = 8.7.2.27.4 or 8.7.3.31.5• Change of Motion Ctrl. = 8.7.2.27.5 or 8.7.3.31.6• Change in Operation = 8.7.2.27.6 or 8.7.3.31.7• Related requirements
– Top of Car Inspection = 8.7.2.27.1 or 8.7.3.31.1– Leveling = 8.7.2.27.2 or 8.7.3.31.2– Anti-creep = 8.7.3.31.3– Stop Switch = 8.7.2.27.7 (was 8.7.2.14.5 in a-2002 and earlier)
– Alter an EPD = 8.7.2.27.8 or 8.7.3.31.11 (‘07)
CodeDataPlate.com
Common Errors - Jack 8.7.3.23• Replace Jack with new Jack = 8.7.3.23.1• Cut off head and weld onto new Cylinder,
re-use the plunger = 8.7.3.23.3• Related requirements
– Plunger only = 8.7.3.23.2– Change of Working Pressure = 8.7.3.23.4– Relocation of Jack = 8.7.3.23.5– Relocation of Tank = 8.7.3.23.6– Plunger Gripper = 8.7.3.23.7
CodeDataPlate.com
Custom Software
CodeDataPlate.com
Custom Software
CodeDataPlate.com
Custom Plates• Alterations Under A17.1-1996 Edition
• Alterations Under A17.1-2000 Edition
#REF!SECT. 8.7 REQUIREMENTS COMPLIED WITH:
8.7.2.11.5, 8.7.2.28.
CODE DATA PLATEINSTALLATION CODE: ANSI A17.1-1978ALTERATION CODE: ASME A17.1-2000
codedataplate.com
#REF!PART XII RULES COMPLIED WITH:
codedataplate.com
1201.11, 1202.13.
ALTERATION CODE: ASME A17.1a-1994INSTALLATION CODE: ANSI A17.1-1978
CODE DATA PLATE
CodeDataPlate.com
Alteration Plate
#REF!
codedataplate.com
ALTERATION CODE: ASME A17.1-2000SECT. 8.7 REQUIREMENTS COMPLIED WITH:
8.7.2.11.5, 8.7.2.13, 8.7.3.8, 8.7.3.12, 8.7.3.23.7, 8.7.3.24, 8.7.3.29, 8.7.3.30, 8.7.3.31.1, 8.7.3.31.2, 8.7.3.31.5, 8.7.3.31.8
CODE DATA PLATEINSTALLATION CODE: ASA A17.1-1965
Door Operator
Wiring
Re-opening Devise
Door Restrictor
Plunger Gripper
Valve
Tank
Limits
Top of Car Insp..
Leveling
Controller Replacement
Emergency Operations
CodeDataPlate.com
Jack Replacement
Re-opening Devise
Door Restrictor
Rope Brake
Cylinder Only
Cab Interiors
Valve Alteration
Emergency Lowering
HY Fire Service Alterations TR
-2000 a-2002b-2003 -2004 a-2005 -2007
#REF!8.7.2.11.5 8.7.2.13 8.7.2.14.3 8.7.2.20 8.7.2.288.7.3.23.1 8.7.3.23.3 8.7.3.24 8.7.3.31.8 8.7.3.31.9
cdp
CODE DATA PLATEALTERATION CODE: ASME A17.1
SECT. 8.7 REQUIREMENTS COMPLIED WITH:
Field Marked Alteration PlateCovers Common Minor Alterations
Instructions Provided
CodeDataPlate.com
Code Data Plate Kits
CodeDataPlate.com
Thank You - Questions