no.eiswk0030a om ron · 2017. 8. 4. · no.eiswk0030a original om ron eu declaration of conformity...
TRANSCRIPT
No.EISWK0030A
Original om Ron EU DECLARATION OF CONFORMITY
1. Product Models/Products:
D4N. D4N-R. D4NH Series
2. Name and address of the manufacturer:
OMRON Corporation
Shiokoji Horikawa Shimogvo-Ku. Kyoto. 600-8530 Japan
3. This declaration of conformity is issued under the sole responsibility of the
manufacturer.
4. Objects of the declaration:
D4N. D4N-R. D4NH Series without direct opening operation. Limit Switches
5. The objects of the declaration described above are in conformity with the
relevant Union harmonization legislation:
2006/95/EC Low Voltage Directive (valid until19 Apri12016)
2014/35/EU Low Voltage Directive (valid from 20 April 2016)
6. References to the relevant harmonized standards used or references to the
other technical specifications in relation to which conformity is declared:
EN 60947-5-1 :2004+A1 :2009
Signed and on behalf of: OMRON Corporation
Place and date of issue: -~,Qz-'t~"""SY A/I S1gnature: " /
Name: Yoshinori Matsueda
Function: Industrial Automation Company. Safety Division.
Safety Product Management Group Manager
Name and address of contact in EU
OMRON Europe B.V.
Quality & Environment Department
Attn: J.J.P.W. Vogelaar. European Quality & Environment Manager
Zilverenberg 2. 5234 GM. 's-Hertogenbosch. The Netherlands
113 GQ· l51845Al
No.EISWK0030A
Additional Information
D4N, D4N-R, D4NH Series without direct opening operation, Limit Switches
D4N D- 1 ~ 21 D - #
II Il l IV V VI VII
I : Basic type
IT : With or without lever shaft for door hinge
Blank: Without lever shaft
A: Without lever shaft (for the production in China)
H : With lever shaft for door hinge
m :Conduit Variation
1 : Pg13.5 (1 Conduit)
2: G1/2 (1 Conduit)
3 : 1/2-14NPT (1 Conduit)
4 : M20 (1 Conduit)
5 : Pg13.5 (2 Conduit)
6 : G1/2 (2 Conduit)
7: 1/2-14NPT (2 Conduit)
8 : M20 (2 Conduit)
9 : M12 (1 Conduit, with Plug)
A : M12 (2 Conduit, with Plug)
B: M12 (1 Conduit, with Connector)
C : M12 (2 Conduit, with Connector)
IV : Switch Mechanism
1 : 1NC/ 1NO (Snap action)
2 : 2NC (Snap action)
A : 1NC/ 1NO (Slow action)
B : 2NC (Slow action)
C : 2NC/ 1NO (Slow action)
D : 3NC (Slow action)
E : 1 NC/ 1 NO (Make Before Break) (Slow action)
F : 2NC/ 1 NO (Make Before Break) (Slow action)
G: 2NO (Slow action)
2/3 GQ-151845Al
V :Actuator
21 : Adjustable roller lever
27 : Adjustable roller lever
28 : Adjustable roller lever
29 : Rod lever
2B: Adjustable roller lever
80 : Wobble lever
87 : Wobble lever plastic rod
VI : With or without reset button
Blank : Without reset button
R: With reset button
VII : Customer code
Blank : Standard
No.EISWK0030A
(R20 to R65, metal lever, plastic roller)
(R31 to R65, metal lever, rubber roller)
(R31 to R80, metal lever, rubber roller)
(R20 to R66, metal lever, plastic roller)
GP : Special code for model connected with Connector type XS2W-D421
##: Customer code
Maximum 6 digit number(s) and /or letter(s) except for GP
3/3 GQ-151845Al
No.EISWK0031B
1/3
GQ-151845A1
Original
EU DECLARATION OF CONFORMITY
1. Product Models/Products:
D4N,D4N-RH,D4NH Series
2. Name and address of the manufacturer:
OMRON Corporation
Shiokoji Horikawa Shimogyo-Ku, Kyoto, 600-8530 Japan
3. This declaration of conformity is issued under the sole responsibility of the
manufacturer.
4. Objects of the declaration:
D4N,D4N-R,D4NH Series with direct opening operation, Safety Limit Switches
5. The objects of the declaration described above are in conformity with the
relevant Union harmonization legislation:
2006/42/EC Machinery Directive
6. References to the relevant harmonized standards used or references to the
other technical specifications in relation to which conformity is declared:
EN ISO14119: 2013 Clause 9.2.2 EN115-1:2008+A1:2010
EN 60947-5-1:2004+A1:2009
Signed and on behalf of: OMRON Corporation
Place and date of issue:
Signature:
Name: Kunio Nakatani
Function: Industrial Automation Company,
Switch Product Management Group, Component Div,
Product Business Division HQ, Manager Name and address of contact in EU
OMRON Europe B.V.
Quality & Environment Department
Attn: J.J.P.W. Vogelaar, European Quality & Environment Manager
Zilverenberg 2, 5234 GM, 's-Hertogenbosch, The Netherlands
No.EISWK0031B
2/3
GQ-151845A1
Additional Information
D4N, D4N-R, D4NH Series with direct opening operation, Safety Limit Switches
D4N □– 1 A 11 □ - #
I II III IV V VI VII
Ⅰ: Basic type
Ⅱ: With or without lever shaft for door hinge
Blank:
A:
H:
Without lever shaft
Without lever shaft (for the production in China)
With lever shaft for door hinge
Ⅲ:Conduit Variation
1:
2:
3:
4:
5:
6:
7:
8:
9:
A:
B:
C:
Pg13.5
G1/2
1/2-14NPT
M20
Pg13.5
G1/2
1/2-14NPT
M20
M12
M12
M12
M12
(1 Conduit)
(1 Conduit)
(1 Conduit)
(1 Conduit)
(2 Conduit)
(2 Conduit)
(2 Conduit)
(2 Conduit)
(1 Conduit, with Plug)
(2 Conduit, with Plug)
(1 Conduit, with Connector)
(2 Conduit, with Connector)
IV:Switch Mechanism
1:
2:
A:
B:
C:
D:
E:
F:
G:
1NC/ 1NO
2NC
1NC/ 1NO
2NC
2NC/ 1NO
3NC
1NC/ 1NO (Make Before Break)
2NC/ 1NO (Make Before Break)
2NO
(Snap action)
(Snap action)
(Slow action)
(Slow action)
(Slow action)
(Slow action)
(Slow action)
(Slow action)
(Slow action)
No.EISWK0031B
3/3
GQ-151845A1
V:Actuator
20:
22:
23:
25:
26:
2G:
2H:
2J:
2L:
31:
32:
34:
62:
63:
64:
72:
RE:
LE:
AS:
AS1:
BC:
Roller lever
Roller lever
Roller lever
Roller lever
Roller lever
Adjustable roller lever
Adjustable roller lever
Roller lever
Adjustable roller lever
Plunger
Roller plunger
Metal roller plunger
One way roller lever
One way roller lever
One way roller lever
One way roller lever
Right side, Fork lever lock
Left side, Fork lever lock
Rotary shaft (φ8.5 hole)
Rotary shaft (φ6 x 15mm)
Center lever
(R26, plastic lever, plastic roller)
(R26, metal lever, plastic roller)
(R28, metal lever, plastic roller)
(R26, metal lever, metal roller)
(R26, metal lever, bearing roller)
(form lock, R20 to R66, metal lever, plastic roller)
(form lock, R32 to R66, metal lever, rubber roller)
(R26, metal lever, plastic long roller)
(form lock, R20 to R66, metal lever, metal roller)
(R20, φ12 x 5mm) (horizontal)
(horizontal)
(R14.9, φ14 x 5mm) (horizontal) (See Note 1)
(vertical)
(R26, rubber roller)
(R26, rubber roller)
(See Note 2)
(See Note 2)
(See Note 2)
* Note 1) Mechanical Durability is 3, 000, 000 operations.
* Note 2) Mechanical Durability is 1, 000, 000 operations.
VI: With or without reset button
Blank:
R:
Without reset button
With reset button
VII:Customer code
Blank:
GP:
##:
Standard
Special code for model connected with Connector type XS2W-D421
Customer code
Maximum 6 digit number(s) and /or letter(s) except for GP
CERTIFICATE No. B 14 03 39656 267
Holder of Certificate: Om ron Corporation Shiokoji Horikawa,Shimogyo-ku Kyoto
Production Facility(ies):
Certification Mark:
Product:
600-8530 JAPAN
85853, 87327
Limit Switches
Product Service
Limit Switch with I without Direct Opening Action
Model(s):
Parameters:
D4N II-III IV V VI-VII (See Attachment 1 for Nomenclature)
AC: 240 VAC I 3A, 50-60Hz (AC-15) DC: 250 VDC I 0.27A (DC-13)
See Suffix VII of attached nomenclature Protection class: II Protection degree: IP67 (IP65 for D4NA series only) Pollution degree: 3 Overvoltage category: Ill Conditional Short Circuit Current: 100 A Electrical durability: 150000 Cycles Mechanical durability: 10000000 Cycles
See Suffix V of attached nomenclature
Remark: When installing/inserting the equipment all requirements of the mentioned test standard must be fulfilled .
Tested according to: EN 60947-5-11A1 :2009
The product was tested on a voluntary basis and complies with the essential requirements. The certification mark shown above can be affixed on the product. It is not permitted to alter the certification mark in any way. In addition the certification holder must not transfer the certificate to third parties. See also notes overleaf.
Test report no.: 73508741-12
Date, 2014-03-11
Page 1 of 3
TOV SOD Product Service GmbH · Zertifizierstelle · Ridlerstra~e 65 · 80339 Miinchen · Germany
Certificate Attachment 1 Certificate No.
8 14 03 39656 267
TYPE NOMENCLATURE:
D4N I
6 II
1: Basic type
1 Ill
II: With or without lever shaft for door hinge Blank: Without lever shaft
6 IV
ll v
B VI
A: Without lever shaft (for the production in China) H: With lever shaft for door hinge
Ill: Conduit Variation 1: Pg13.5 2: G1/2 3: 1/2-14NPT 4: M20 5: Pg13.5 6: G1/2 7: 1/2-14NPT 8: M20 9: M12 A: M12 B: M12 C: M12
IV: Switch Mechanism 1: 1NC/1NO 2: 2NC A: 1NC/1NO B: 2NC C: 2NC/1NO D: 3NC E: 1 NC/ 1 NO (Make Before Break) F: 2NC/1 NO (Make Before Break) G: 2NO
Page 2 of 3
(1 Conduit) (1 Conduit) (1 Conduit) (1 Conduit) (2 Conduit) (2 Conduit) (2 Conduit) (2 Conduit) (1 Conduit, with Plug) (2 Conduit, with Plug) (1 Conduit, with Connector) (2 Conduit, with Connector)
(Snap action) (Snap action) (Slow action) (Slow action) (Slow action) (Slow action) (Slow action) (Slow action) (Slow action)
11. VII
TOV SOD Product Service GmbH · Zertifizierstelle · Ridlerstra~e 65 · 80339 Mi.inchen · Germany
Product Service
..,. 0
Certificate Attachment 1 Certificate No.
8 14 03 39656 267
V: Actuator
20: Roller lever
21: Adjustable roller lever 22: Roller lever 23: Roller lever 25: Roller lever
26: Roller lever
27: Adjustable roller lever
28: Adjustable roller lever
29: Rod lever 2B: Adjustable roller lever 2G: Adjustable roller lever 2H: Adjustable roller lever
2J: Roller lever
2L: Adjustable roller lever
31 : Plunger
32: Roller plunger
34: Metal roller plunger
62: One way roller lever
63: One way roller lever
64: One way roller lever
72: One way roller lever
80: Wobble lever
87: Wobble lever plastic rod
RE: Right side, Fork lever lock
LE: Left side, Fork lever lock
AS: Rotary shaft (<p8.5 hole)
AS1: Rotary shaft (<p6 x 15mm)
BC: Center lever
(R26, plastic lever, plastic roller) (R20 to R65, metal lever, plastic roller) (R26, metal lever, plastic roller) (R28, metal lever, plastic roller) (R26, metal lever, metal roller)
(R26, metal lever, bearing roller)
(R31 to R65, metal lever, rubber roller)
(R31 to R80, metal lever, rubber roller)
(R20 to R66, metal lever, plastic roller)
Product Service
(form lock, R20 to R66, metal lever, plastic roller) (form lock, R32 to R66, metal lever, rubber roller)
(R26, metal lever, plastic long roller) (form lock, R20 to R66, metal lever, metal roller)
(R20, <p12 x 5mm) (horizontal)
(horizontal) (R14.9, <p14 x 5mm) (horizontal) (See Note 1) (vertical)
(R26, rubber roller)
(R26, rubber roller) (See Note 2) (See Note 2) (See Note 2)
Note 1: Mechanical Durability is 3, 000, 000 operations.
Note 2: Mechanical Durability is 1, 000, 000 operations.
VI : With or without reset button Blank: Without reset button
R: With reset button
VII : Customer code
Blank: Standard GP: Special code for model connected with Connector type XS2W-D421
#: Customer code (Maximum 6 digit number(s) and /or letter(s) except for GP)
*Note: Rated voltage and current for D4N-9xxx-GP; 120VAC/3A(AC-15), 125VDC/0.22A(DC-1 3)
Page 3 of 3
TOV SUD Product Service GmbH · Zertifizierstelle · RidlerstraBe 65 · 80339 MUnchen · Germany
5/25/2018 NKCR.E76675 - Auxiliary Devices
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=NKCR.E76675&ccnshorttitle=Auxiliary+Devices&objid=1074106589&cfgid=107
NKCR.E76675 Auxiliary Devices
If you notice a change to your NKCR Listing Card, click here to learn more.
Page Bottom
Auxiliary Devices See General Information for Auxiliary Devices OMRON CORP E76675SAFETY STANDARDS GROUPIAB GLOBAL QUALITY CENTERSHIOKOJI HORIKAWASHIMOGYO-KU, KYOTO 600-8530 JAPAN
Trademark and/or Tradename: ,
Investigated to ANSI/UL 508
Emergency Stop Pushbutton Switches Model(s) Series A22NE, followed by -S, -M or -L, may be followed by P, may be followed by RC, RO, RSor TN, followed by -P, followed by 0, 1, 2, A, B or C, followed by 0, 1, 2, A, B or C, followed by 0, 1, 2, A, B or C, followed by -N, -A, -B, -C, -D or-E, may be followed by -B, -S or -SB.
Auxilary Device Enclosed Model(s) Switches, type D4SL-N; followed by 1, 2, 3 or 4; followed by A, B, C, D, E, F, G, H, J, K, L, M, N, P, Q or R;followed by F or D; followed by A or G; may be followed by C or D; may be followed by 4; followed by C; followed by 1, 3 or 5 may be followed byadditional letter(s) and/or number(s).
Auxilary Device Enclosed Key-type Selector Switch Model(s) A22LK, followed by 2RLA or 2RLB,followed by 22,13,or 04,may be followed byK, followed by 01, may be followed by up to 10 letters and/or numbers.
Auxilary Device Open type Model(s) G9SE Series followed by 2, 4, followed by 0, 2, followed by 1, followed by blank, T05, or T30.
Door lock switches Model(s) D4GL, followed by 1, 2, 3 or 4, followed by A thru H or J thru M, followed by B, F, L, R, D, E, G or H, followed by A,G or N, may be followed by A, B or C, may be followed by 4, may be followed by N.*
Door switches Model(s) D4BL Series, followed by 1, 2, 3 or 4, followed by C, D, E or F, followed by A, B C, D, E, F or G, followed by blank, A, B,C, D, E or F, followed by blank, 12-30 or T, followed by blank or up to six letters and/or numbers.
D4BS-11BSF1*, D4BS-11FSF1*, D4BS-11LSF1*, D4BS-11RSF1*
D4GS-N, followed by 1, 2, 3 or 4, followed by R or T, may be followed by 3, 5 or up to two letter and/or numbers, may be followed by up to sixletters and/or numbers.
D4JL, followed by 1, 2, 3 or 4, followed by A thru H, J thru N or P thru R, followed by D or F, followed by A or G, followed by C or D, followed by 5,6, 7, or 8, followed by blank, followed by blank, Y or Z, may be followed by four alphanumeric code, may be followed by six digit maximumalphanumeric code.
D4N 9120GP
D4N, may be followed by A or H, followed by 1 thru 9 or A, B or C, followed by 1, 2 or A thru G, followed by 20, 21, 21-TK, 22 thru 29, 2B, 2C,2D, 2G, 2H, 2J, 2L, 31, 32, 34, 62, 63, 72, 80, 87, RE, LE, AS, BC or AS1, may be followed by R.*
D4NL, followed by 1, 2, 3 or 4, followed by A thru H, J thru N, P or Q, followed by B, D, E, F, G, L or R, followed by A, B, C, D, E, F, G, H, J, K or L,may be followed by A thru F, may be followed by 4, may be followed by S, may be followed by Z.*
D4NS, followed by 1 thru 9 or A, B or C, followed by A thru F, followed by B, D, E, F, G, H, L or R.*
Illuminated Pushbutton Switches Model(s) Series A22N, followed by L, followed by BN, BP, BG, BM, MN, MP, MG, MM, RN, RP, or RM, followedby A or M, followed by TR, TG, TY, TW, TA, or TO, followed by A, followed by G or P, followed by 0,1,2,A,B,or C, followed by 0, followed by
5/25/2018 NKCR.E76675 - Auxiliary Devices
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=NKCR.E76675&ccnshorttitle=Auxiliary+Devices&objid=1074106589&cfgid=107
0,1,2,A,B,or C, followed by R, G, Y, W, A, or O, followed by A, B, C, D, or E.
Illuminated Pushbuttons Switches Model(s) Series A30N, followed by L, followed by MN, MP, MG, or MM, followed by A or M, followed by TR,TG, TY, TW, TA, or TO, followed by A, followed by G or P, followed by 0,1,2,A,B,or C, followed by 0, followed by 0,1,2,A,B,or C, followed by R, G,Y, W, A, or O, followed by A, B, C, D, or E.
Illuminated Selector Switches Model(s) Series A22N, followed by W, followed by 2B, 2M, 2R, 3B, 3M, or 3R, followed by M, L, R, or B, followedby TR, TG, TY, TW, TA, or TO, followed by A, followed by G or P, followed by 0,1,2,A,B,or C, followed by 0, followed by 0,1,2,A,B,or C, followed byR, G, Y, W, A, or O, followed by A, B, C, D, or E.
Series A30N, followed by W, followed by 2M or 3M, followed by M, L, R, or B, followed by TR, TG, TY, TW, TA, or TO, followed by A, followed by Gor P, followed by 0,1,2,A,B,or C, followed by 0, followed by 0,1,2,A,B,or C, followed by R, G, Y, W, A, or O, followed by A, B, C, D, or E.
Key Selector Switches Model(s) Series A22N, followed by K, followed 2B, 2M, 2R, 3B, 3M, or 3R, followed by M, L, R, or B, followed by 01,followed by A, B, C, D, E, F, or G, followed by A, followed by G or P, followed by 0,1,2,A,B or C, followed by 0,1,2,A,B or C, followed by 0,1,2,A,Bor C.
Series A30N, followed by K, followed 2M or 3M, followed by M, L, R, or B, followed by 01, 02, 03, 04, 05, or 06, followed by A, B, C, D, E, F, or G,followed by A, followed by G or P, followed by 0,1,2,A,B or C, followed by 0,1,2,A,B or C, followed by 0,1,2,A,B or C.
Lamp Block Model(s) Series A22N, followed by Z, followed by T, followed by A, B, C, D, or E follow by P or blank, followed by blank or N.
Limit switches Model(s) D4A, followed by 3, may be followed by E, followed by 01-06, 07-V, 07-H, 08-12, 14-20 or 24, may be followed by N,followed by GM or KGM.*
D4B, followed by -1, -2, -3, -4, -5, -6, -7 or -8, followed by 1, 2, 3, 4, 5, 6, 7, 8, A, B, C or D, followed by 1 thru 8 or 00, may be followed by upto two numbers or letters, followed by N, may be followed by LD or LE.*
D4B-F, followed by 1, 2, 3 or 4, followed by 1, 2 or 3, followed by 11, 15, 1F or 1R, followed by F, may be followed by 1.*
D4BS, followed by -1, -2, -3, -4, -5, -6, -7 or -8, followed by 5, 6, 7, 8, A or B, followed by F, R, L or B, followed by S, may be followed by LD orLE.*
D4C, followed by 10, 20, 30, A0, C0 or D0, followed by a two digit number, followed by DRAJ01 or ARAJ01.*
D4C-1*, D4C-2*, D4C-3*, D4C-4*, D4C-5*, D4C-6*, D4CC-1*, D4CC-2*, D4CC-3*, D4CC-4*, D4CC-5*, D4CC-6*
D4F, followed by 1 thru 5, followed by 0 or 2, followed by 0, 2, 3, G or H, followed by a number, followed by R, L or D.*
SHL, followed by D, Q or W, with or without 1 or 2 digit number, followed by 55, followed by blank, followed by blank, L, L6 or L7, followed byblank, MD, ML or MR, followed by blank, 2 or 3, followed by blank, TC or TH, followed by blank or 11, followed by blank or T, followed by blank orup to six additional letters and/or numbers.
WL, may be followed by M, followed by RCA2-, CA2-##, CA-##, CA12-##, CL##-##, CAL##-##, RG2-, G2-##, G12-##, GL##-##, GAL##-##, RCA2-2, CA2-2##, CA-2##, CA12-2##, CL##-2##, CAL##-2##, RCA2-2N, CA2-2##N, CA-2##N, CA12-2##N, CL##-2##N orCAL##-2##N, RGCA-, GCA2-##, GCA12-##, GCL##-##, GCAL##-##, RCA32-, CA32-###, D###-, D2###-, D3###-, SD###-, SD2###-,SD3###-, NJ-###, NJ-S### or GNJ-###, may be followed by P1, TH or TC55, may be followed by E2 or P2, may be followed by 139 to 145,RP4# or RP6#, followed by LD or LR, may be followed by 2 or 3, may be followed by A or F, may be followed by S or S2, followed by -M1J###,-M1GJ###, -M1JB###, -DGJ###, -DGJS###, -DHJS###-A, -DK1CJ###, -DK1EJ###, -DK1EJ2###, -M1TJ###, -M1TJB###, -M1TGJ###, -DTGJ###, -DTGJS###, -DTK1EJ###, K13, K15, K17, K41, K42, K43 or K51, may be followed by -Q, followed by -N, may be followed by optionalletter(s) and/or number(s). ($)
WL, may be followed by M, followed by RCA2-, CA2-##, CA-##, CA12-##, CL##-##, CAL##-##, RG2-, G2-##, G12-##, GL##-##, GAL##-##, RCA2-2, CA2-2##, CA-2##, CA12-2##, CL##-2##, CAL##-2##, RCA2-2N, CA2-2##N, CA-2##N, CA12-2##N, CL##-2##N or,CAL##-2##N, RGCA-, GCA2-##, GCA12-##, GCL##-##, GCAL##-##, RCA32-, CA32-###, D###-, D2###-, D3###-, SD###-, SD2###-,SD3###-, NJ-###, NJ-S### or GNJ-###, may be followed by P1, RP, RP7, RP8, RP9 or E10, may be followed by 55, may be followed by TH orTC, may be followed by E2 or P2, may be followed by 139 to 145, RP4# or RP6#, may be followed by A or F, may be followed by S or S2, followedby -AGJ### or -AK1EJ###, may be followed by -Q, followed by -N, may be followed by optional letter(s) and/or number(s).($)
WL, may be followed by M, followed by RCA2-, CA2-##, CA-##, CA12-##, CL##-##, CAL##-##, RG2-, G2-##, G12-##, GL##-##, GAL##-##, RCA2-2, CA2-2##, CA-2##, CA12-2##, CL##-2##, CAL##-2##, RCA2-2N, CA2-2##N, CA-2##N, CA12-2##N, CL##-2##N or,CAL##-2##N, RGCA-, GCA2-##, GCA12-##, GCL##-##, GCAL##-##, RCA32-, CA32-###, D###-, D2###-, D3###-, SD###-, SD2###-,SD3###-, NJ-###, NJ-S### or GNJ-###, may be followed by P1, RP, RP7, RP8, RP9 or E10, may be followed by 55, may be followed by TH orTC, may be followed by E2 or P2, may be followed by 139 to 145, RP4# or RP6#, may be followed by A or F, may be followed by S or S2, followedby -M1J###,-M1GJ###, -M1JB###, -DGJ###, -DGJS###, -DHJS###-A, -DK1CJ###, -DK1EJ###, -DK1EJ2###, -M1TJ###, -M1TJB###, -M1TGJ###, -DTGJ###, -DTGJS### or, -DTK1EJ###, K13, K15, K17, K41, K42, K43 or K51, may be followed by -Q, followed by -N, may befollowed by optional letter(s) and/or number(s). ($)
WL, may be followed by M, followed by RCA2-, CA2-##, CA-##, CA12-##, CL##-##, CAL##-##, RG2-, G2-##, G12-##, GL##-##, GAL##-##, RCA2-2, CA2-2##, CA-2##, CA12-2##, CL##-2##, CAL##-2##, RCA2-2N, CA2-2##N, CA-2##N, CA12-2##N, CL##-2##N or,CAL##-2##N, RGCA-, GCA2-##, GCA12-##, GCL##-##, GCAL##-##, RCA32-, CA32-###, D###-, D2###-, D3###-, SD###-, SD2###-,SD3###-, NJ-###, NJ-S### or GNJ-###, may be followed by P1, RP, RP7, RP8, RP9 or E10, may be followed by 55, may be followed by TH orTC, may be followed by E2 or P2, may be followed by RP60U, may be followed by G1, G, Y or TS, may be followed by A or F, may be followed by Sor S2, may be followed by -Q, followed by -N, may be followed by optional letter(s) and/or number(s). ($)
WL, may be followed by M, followed by RCA2-, CA2-##, CA-##, CA12-##, CL##-##, CAL##-##, RG2-, G2-##, G12-##, GL##-##, GAL##-##, RCA2-2, CA2-2##, CA-2##, CA12-2##, CL##-2##, CAL##-2##, RCA2-2N, CA2-2##N, CA-2##N, CA12-2##N, CL##-2##N or,CAL##-2##N, RGCA-, GCA2-##, GCA12-##, GCL##-##, GCAL##-##, RCA32-, CA32-###, D###-, D2###-, D3###-, SD###-, SD2###-,SD3###-, NJ-###, NJ-S### or GNJ-###, may be followed by P1, TH or TC55, may be followed by E2 or P2, may be followed by 139 to 145,RP4# or RP6#, followed by LD or LR, may be followed by 2 or 3, may be followed by A or F, may be followed by S or S2, followed by -AGJ### or-AK1EJ###, may be followed by -Q, followed by -N, may be followed by optional letter(s) and/or number(s). ($)
WL, may be followed by M, followed by RCA2-, CA2-##, CA-##, CA12-##, CL##-##, CAL##-##, RG2-, G2-##, G12-##, GL##-##, GAL##-##, RCA2-2, CA2-2##, CA-2##, CA12-2##, CL##-2##, CAL##-2##, RCA2-2N, CA2-2##N, CA-2##N, CA12-2##N, CL##-2##N or,CAL##-2##N, RGCA-, GCA2-##, GCA12-##, GCL##-##, GCAL##-##, RCA32-, CA32-###, D###-, D2###-, D3###-, SD###-, SD2###-,SD3###-, NJ-###, NJ-S### or GNJ-###, may be followed by P1, TH or TC55, may be followed by E2 or P2, may be followed by RP60U, may
5/25/2018 NKCR.E76675 - Auxiliary Devices
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=NKCR.E76675&ccnshorttitle=Auxiliary+Devices&objid=1074106589&cfgid=107
be followed by G1, G, Y or TS, followed by LE, may be folowed by 2 or 3, may be followed by A or F, may be followed by S or S2, may be followedby -Q, followed by -N, may be followed by optional letter(s) and/or number(s). ($)
WL, may be followed by M, followed by RCA2-, CA2-##, CA-##, CA12-##, CL##-##, CAL##-##, RG2-, G2-##, G12-##, GL##-##, GAL##-##, RCA2-2, CA2-2##, CA-2##, CA12-2##, CL##-2##, CAL##-2##, RCA2-2N, CA2-2##N, CA-2##N, CA12-2##N, CL##-2##N,CAL##-2##N, RGCA-, GCA2-##, GCA12-##, GCL##-##, GCAL##-##, RCA32-, CA32-###, D###-, D2###-, D3###-, SD###-, SD2###-,SD3###-, NJ-###, NJ-S### or GNJ-###, may be followed 55, may be followed by E2 or P2, may be followed by 139 to 145, RP4# or RP6#,followed by LE, may be followed by 2 or 3, may be followed by A or F, may be followed by S or S2, followed by -AGJ### or -AK1EJ###, may befollowed by -Q, followed by -N, may be followed by optional letter(s) and/or number(s). ($)
WL, may be followed by R, followed by C, D, G, H, NJ, or SD, followed by a number, may be followed by LD, followed by GM, KGM or K-GM.*
WL, may be followed by R, may be followed by 01, may be followed by A or B, may be followed by M, followed by C#, D#, G#, H#, NJ#, or SD#where # is up to a ten-digit symbol of letter(s) and/or number(s), may be followed by E2, may be followed by RP, 10, or 31, may be followed byP1, may be followed by 55, may be followed by TC, TC2, TH, or T, may be followed by 13##, RP4##, RP5##, RP6##, or 14##, where ## is aone or two digit symbol of letter(s) and/or number(s), may be followed by G1, G, Y, TS, or C, may be followed by LE, LD, LDN, LR or R, may befollowed by 2 or 3, may be followed by A or F, may be followed by S, may be followed by DGJ###, DTGJ###, DK1CJ###, DK1EJ###,DTK1EJ###, M1J###, M1TJ###, M1GJ###, M1TGJ###, M5J###, DHJS###, AGJ###, AK1EJ####, AK1J###, AK4EJ### or K###, where### is up to a five digit symbol of letter(s) and/or number(s), may be followed by up to a five digit symbol of letter(s) and/or number(s).
ZE, ZV or ZV2, may be followed by -01 or Y, followed by N or Q, followed by six letters and/or numbers, may be followed by 2, may be followedby G, G1, S or Y, may be followed by TC or TH.*
Limit switches, actuator heads Model(s) D4A-0001N*, D4A-0002N*, D4A-0003N*, D4A-0004N*, D4A-0005N*, D4A-0006N*, D4A-0007HN*,D4A-0007VN*, D4A-0008N*, D4A-0009N*, D4A-0010N*, D4A-0011N*, D4A-0012N*, D4A-0014N*, D4A-0015N*, D4A-0016N*, D4A-0017N*,D4A-0018N*, D4A-0019N*, D4A-0020N*, D4A-0024N*
Limit switches, bodies Model(s) D4A-0000N*, D4A-0100N*, D4A-0300N*, D4A-0500N*, D4A-0700N*, D4A-0900N*, D4A-0E00N*
Limit switches, receptacles Model(s) D4A-1000*, D4A-1000N*, D4A-2000*, D4A-2000N*, D4A-3000*, D4A-3000N*, D4A-4000*, D4A-4000N*, D4A-5000*, D4A-5000N*, D4A-6000*, D4A-6000N*
Limit swtiches Model(s) WL, may be followed by M, followed by RCA2-, CA2-##, CA-##, CA12-##, CL##-##, CAL##-##, RG2-, G2-##, G12-##, GL##-##, GAL##-##, RCA2-2, CA2-2##, CA-2##, CA12-2##, CL##-2##, CAL##-2##, RCA2-2N, CA2-2##N, CA-2##N, CA12-2##N,CL##-2##N or, CAL##-2##N, RGCA-, GCA2-##, GCA12-##, GCL##-##, GCAL##-##, RCA32-, CA32-###, D###-, D2###-, D3###-,SD###-, SD2###-, SD3###-, NJ-###, NJ-S### or GNJ-###, may be followed by P1, TH or TC55, may be followed by E2 or P2, may befollowed by RP60U, may be followed by G1, G, Y or TS, followed by LD or LR, may be followed by 2 or 3, may be followed by A or F, may befollowed by S or S2, may be followed by -Q, followed by -N, may be followed by optional letter(s) and/or number(s). ($)
Magnetically actuated switches Model(s) D40B-1B10, D40B-1B3, D40B-1D10, D40B-1D3, D40B-2B10, D40B-2B3, D40B-2D10, D40B-2D3,D40B-3D5C, D40B-3E5C, D40B-A1, D40B-A2, D40B-A3, D40B-J1, D40B-J2, D40B-S1B10, D40B-S1B3, D40B-S1D10, D40B-S1D3, D40B-S2B10,D40B-S2B3, D40B-S2D10, D40B-S2D3, D40B-S3D5C, D40B-S3E5C
Non-contact door switches Model(s) D40A-1C, followed by 2, 5, or a three digit number, may be followed by -F.+
D40Z, followed by 1, followed by C, may be followed by 2 or 5, may be followed by S or A.*
Non-contact door switches, actuators only Model(s) D40A-A1
Non-contact door switches, sensors only Model(s) D40A-A1C2, D40A-A1C5
Pendant enable switches Model(s) A4EG-, followed by B or C, followed by 00, E1, E2, M2, P1 or P2, followed by 0, B, R, Y or G, followed by 0,followed by 1, 2 or 4, followed by 0 or 1, may be followed by SH, may be followed by up to six number(s) and/or letter(s) except for A.
Pilot Light Model(s) Series M22N, followed by BN, BP, BG or BC, followed by TR, TG, TY, TW, TA, Or TO, followed by A, followed by R, G, Y, W, A,or O, followed by A, B, C, D, or E, followed by P or blank
Pilot Lights Model(s) Series M30N, followed by MN, MP, MG, or MC, followed by TR, TG, TY, TW, TA, Or TO, followed by A, followed by R, G, Y,W, A, or O, followed by A, B, C, D, or E, followed by P or blank.
Pushbutton Switch Model(s) Series A22N, followed by N, followed by BN, BP, BG, BM, MN, MP, MG, MM, RN, RP, or RM, followed by A or M,followed by NR, NG, NY, NW, NA, NB, UR, UG, UY, UW, UA or UO, followed by A, followed by G or P, followed by 0,1,2,A,B or C, followed by0,1,2,A,B or C, followed by 0,1,2,A,B or C, followed by N, followed by N.
Pushbuttons Switches Model(s) Series A30N, followed by N, followed by MN, MP, MG, or MM, followed by A or M, followed by NR, NG, NY, NW,NA, NB, UR, UG, UY, UW, UA or UO, followed by A, followed by G or P, followed by 0,1,2,A,B or C, followed by 0,1,2,A,B or C, followed by0,1,2,A,B or C, followed by N, followed by N.
Selector Switches Model(s) Series A22N, followed by S, followed by 2B, 2M, 2R, 3B, 3M, or 3R, followed by M, L, R, or B, followed by NR, NG,NY, NW, NA, or NB, followed by A, followed by G or P, followed by 0,1,2,A,B or C, followed by 0,1,2,A,B or C, followed by 0,1,2,A,B or C, followedby N, followed by N.
Series A30N, followed by S, followed by 2M or 3M, followed by M, L, R, or B, followed by NR, NG, NY, NW, NA, or NB, followed by A, followed by Gor P, followed by 0,1,2,A,B or C, followed by 0,1,2,A,B or C, followed by 0,1,2,A,B or C, followed by N, followed by N.
Switch Contact Block Model(s) Series A22N followed by Z, followed by S, followed by G or P, followed by 1 or 2, followed by A,B or C, followedby blank or N.
Terminal relays Model(s) F3SP-T01
($) - ##: w/wo Maximum 2 digits number(s), ###: w/wo Maximum 3 digits number(s)
* - May be followed by additional number(s) and/or letter(s).
+ - Additional functional safety investigation was completed to UL 991 and IEC 60947-5-3.
Last Updated on 2017-08-04
5/25/2018 NKCR7.E76675 - Auxiliary Devices Certified for Canada
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=NKCR7.E76675&ccnshorttitle=Auxiliary+Devices+Certified+for+Canada&objid=
NKCR7.E76675 Auxiliary Devices Certified for Canada
If you notice a change to your NKCR7 Listing Card, click here to learn more.
Page Bottom
Auxiliary Devices Certified for Canada See General Information for Auxiliary Devices Certified for Canada OMRON CORP E76675SAFETY STANDARDS GROUPIAB GLOBAL QUALITY CENTERSHIOKOJI HORIKAWASHIMOGYO-KU, KYOTO 600-8530 JAPAN
Investigated to CAN/CSA C22.2 No. 14-13
Emergency Stop Pushbutton Switches Model(s) Series A22NE, followed by -S, -M or -L, may be followed by P, may be followed by RC, RO, RSor TN, followed by -P, followed by 0, 1, 2, A, B or C, followed by 0, 1, 2, A, B or C, followed by 0, 1, 2, A, B or C, followed by -N, -A, -B, -C, -D or-E, may be followed by -B, -S or -SB.
Auxilary Device Enclosed Key-type Selector Switch Model(s) A22LK, followed by 2RLA or 2RLB,followed by 22,13,or 04,may be followed byK, followed by 01, may be followed by up to 10 letters and/or numbers.
Auxilary Device Open type Model(s) G9SE Series followed by 2, 4, followed by 0, 2, followed by 1, followed by blank, T05, or T30.
Illuminated Pushbutton Switches Model(s) Series A22N, followed by L, followed by BN, BP, BG, BM, MN, MP, MG, MM, RN, RP, or RM, followedby A or M, followed by TR, TG, TY, TW, TA, or TO, followed by A, followed by G or P, followed by 0,1,2,A,B,or C, followed by 0, followed by0,1,2,A,B,or C, followed by R, G, Y, W, A, or O, followed by A, B, C, D, or E.
Illuminated Pushbuttons Switches Model(s) Series A30N, followed by L, followed by MN, MP, MG, or MM, followed by A or M, followed by TR,TG, TY, TW, TA, or TO, followed by A, followed by G or P, followed by 0,1,2,A,B,or C, followed by 0, followed by 0,1,2,A,B,or C, followed by R, G,Y, W, A, or O, followed by A, B, C, D, or E.
Illuminated Selector Switches Model(s) Series A22N, followed by W, followed by 2B, 2M, 2R, 3B, 3M, or 3R, followed by M, L, R, or B, followedby TR, TG, TY, TW, TA, or TO, followed by A, followed by G or P, followed by 0,1,2,A,B,or C, followed by 0, followed by 0,1,2,A,B,or C, followed byR, G, Y, W, A, or O, followed by A, B, C, D, or E.
Series A30N, followed by W, followed by 2M or 3M, followed by M, L, R, or B, followed by TR, TG, TY, TW, TA, or TO, followed by A, followed by Gor P, followed by 0,1,2,A,B,or C, followed by 0, followed by 0,1,2,A,B,or C, followed by R, G, Y, W, A, or O, followed by A, B, C, D, or E.
Key Selector Switches Model(s) Series A22N, followed by K, followed 2B, 2M, 2R, 3B, 3M, or 3R, followed by M, L, R, or B, followed by 01,followed by A, B, C, D, E, F, or G, followed by A, followed by G or P, followed by 0,1,2,A,B or C, followed by 0,1,2,A,B or C, followed by 0,1,2,A,Bor C.
Series A30N, followed by K, followed 2M or 3M, followed by M, L, R, or B, followed by 01, 02, 03, 04, 05, or 06, followed by A, B, C, D, E, F, or G,followed by A, followed by G or P, followed by 0,1,2,A,B or C, followed by 0,1,2,A,B or C, followed by 0,1,2,A,B or C.
Lamp Block Model(s) Series A22N, followed by Z, followed by T, followed by A, B, C, D, or E follow by P or blank, followed by blank or N.
Limit switches Model(s) WL, may be followed by M, followed by RCA2-, CA2-##, CA-##, CA12-##, CL##-##, CAL##-##, RG2-, G2-##, G12-##, GL##-##, GAL##-##, RCA2-2, CA2-2##, CA-2##, CA12-2##, CL##-2##, CAL##-2##, RCA2-2N, CA2-2##N, CA-2##N, CA12-2##N,CL##-2##N or CAL##-2##N, RGCA-, GCA2-##, GCA12-##, GCL##-##, GCAL##-##, RCA32-, CA32-###, D###-, D2###-, D3###-,SD###-, SD2###-, SD3###-, NJ-###, NJ-S### or GNJ-###, may be followed by P1, TH or TC55, may be followed by E2 or P2, may befollowed by 139 to 145, RP4# or RP6#, followed by LD or LR, may be followed by 2 or 3, may be followed by A or F, may be followed by S or S2,followed by -M1J###,-M1GJ###, -M1JB###, -DGJ###, -DGJS###, -DHJS###-A, -DK1CJ###, -DK1EJ###, -DK1EJ2###, -M1TJ###, -M1TJB###, -M1TGJ###, -DTGJ###, -DTGJS###, -DTK1EJ###, K13, K15, K17, K41, K42, K43 or K51, may be followed by -Q, followed by -N,may be followed by optional letter(s) and/or number(s). ($)
WL, may be followed by M, followed by RCA2-, CA2-##, CA-##, CA12-##, CL##-##, CAL##-##, RG2-, G2-##, G12-##, GL##-##, GAL##-##, RCA2-2, CA2-2##, CA-2##, CA12-2##, CL##-2##, CAL##-2##, RCA2-2N, CA2-2##N, CA-2##N, CA12-2##N, CL##-2##N or,CAL##-2##N, RGCA-, GCA2-##, GCA12-##, GCL##-##, GCAL##-##, RCA32-, CA32-###, D###-, D2###-, D3###-, SD###-, SD2###-,SD3###-, NJ-###, NJ-S### or GNJ-###, may be followed by P1, RP, RP7, RP8, RP9 or E10, may be followed by 55, may be followed by TH or
5/25/2018 NKCR7.E76675 - Auxiliary Devices Certified for Canada
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=NKCR7.E76675&ccnshorttitle=Auxiliary+Devices+Certified+for+Canada&objid=
TC, may be followed by E2 or P2, may be followed by 139 to 145, RP4# or RP6#, may be followed by A or F, may be followed by S or S2, followedby -AGJ### or -AK1EJ###, may be followed by -Q, followed by -N, may be followed by optional letter(s) and/or number(s).($)
WL, may be followed by M, followed by RCA2-, CA2-##, CA-##, CA12-##, CL##-##, CAL##-##, RG2-, G2-##, G12-##, GL##-##, GAL##-##, RCA2-2, CA2-2##, CA-2##, CA12-2##, CL##-2##, CAL##-2##, RCA2-2N, CA2-2##N, CA-2##N, CA12-2##N, CL##-2##N or,CAL##-2##N, RGCA-, GCA2-##, GCA12-##, GCL##-##, GCAL##-##, RCA32-, CA32-###, D###-, D2###-, D3###-, SD###-, SD2###-,SD3###-, NJ-###, NJ-S### or GNJ-###, may be followed by P1, RP, RP7, RP8, RP9 or E10, may be followed by 55, may be followed by TH orTC, may be followed by E2 or P2, may be followed by 139 to 145, RP4# or RP6#, may be followed by A or F, may be followed by S or S2, followedby -M1J###,-M1GJ###, -M1JB###, -DGJ###, -DGJS###, -DHJS###-A, -DK1CJ###, -DK1EJ###, -DK1EJ2###, -M1TJ###, -M1TJB###, -M1TGJ###, -DTGJ###, -DTGJS### or, -DTK1EJ###, K13, K15, K17, K41, K42, K43 or K51, may be followed by -Q, followed by -N, may befollowed by optional letter(s) and/or number(s). ($)
WL, may be followed by M, followed by RCA2-, CA2-##, CA-##, CA12-##, CL##-##, CAL##-##, RG2-, G2-##, G12-##, GL##-##, GAL##-##, RCA2-2, CA2-2##, CA-2##, CA12-2##, CL##-2##, CAL##-2##, RCA2-2N, CA2-2##N, CA-2##N, CA12-2##N, CL##-2##N or,CAL##-2##N, RGCA-, GCA2-##, GCA12-##, GCL##-##, GCAL##-##, RCA32-, CA32-###, D###-, D2###-, D3###-, SD###-, SD2###-,SD3###-, NJ-###, NJ-S### or GNJ-###, may be followed by P1, RP, RP7, RP8, RP9 or E10, may be followed by 55, may be followed by TH orTC, may be followed by E2 or P2, may be followed by RP60U, may be followed by G1, G, Y or TS, may be followed by A or F, may be followed by Sor S2, may be followed by -Q, followed by -N, may be followed by optional letter(s) and/or number(s). ($)
WL, may be followed by M, followed by RCA2-, CA2-##, CA-##, CA12-##, CL##-##, CAL##-##, RG2-, G2-##, G12-##, GL##-##, GAL##-##, RCA2-2, CA2-2##, CA-2##, CA12-2##, CL##-2##, CAL##-2##, RCA2-2N, CA2-2##N, CA-2##N, CA12-2##N, CL##-2##N or,CAL##-2##N, RGCA-, GCA2-##, GCA12-##, GCL##-##, GCAL##-##, RCA32-, CA32-###, D###-, D2###-, D3###-, SD###-, SD2###-,SD3###-, NJ-###, NJ-S### or GNJ-###, may be followed by P1, TH or TC55, may be followed by E2 or P2, may be followed by 139 to 145,RP4# or RP6#, followed by LD or LR, may be followed by 2 or 3, may be followed by A or F, may be followed by S or S2, followed by -AGJ### or-AK1EJ###, may be followed by -Q, followed by -N, may be followed by optional letter(s) and/or number(s). ($)
WL, may be followed by M, followed by RCA2-, CA2-##, CA-##, CA12-##, CL##-##, CAL##-##, RG2-, G2-##, G12-##, GL##-##, GAL##-##, RCA2-2, CA2-2##, CA-2##, CA12-2##, CL##-2##, CAL##-2##, RCA2-2N, CA2-2##N, CA-2##N, CA12-2##N, CL##-2##N or,CAL##-2##N, RGCA-, GCA2-##, GCA12-##, GCL##-##, GCAL##-##, RCA32-, CA32-###, D###-, D2###-, D3###-, SD###-, SD2###-,SD3###-, NJ-###, NJ-S### or GNJ-###, may be followed by P1, TH or TC55, may be followed by E2 or P2, may be followed by RP60U, maybe followed by G1, G, Y or TS, followed by LE, may be folowed by 2 or 3, may be followed by A or F, may be followed by S or S2, may be followedby -Q, followed by -N, may be followed by optional letter(s) and/or number(s). ($)
WL, may be followed by M, followed by RCA2-, CA2-##, CA-##, CA12-##, CL##-##, CAL##-##, RG2-, G2-##, G12-##, GL##-##, GAL##-##, RCA2-2, CA2-2##, CA-2##, CA12-2##, CL##-2##, CAL##-2##, RCA2-2N, CA2-2##N, CA-2##N, CA12-2##N, CL##-2##N,CAL##-2##N, RGCA-, GCA2-##, GCA12-##, GCL##-##, GCAL##-##, RCA32-, CA32-###, D###-, D2###-, D3###-, SD###-, SD2###-,SD3###-, NJ-###, NJ-S### or GNJ-###, may be followed 55, may be followed by E2 or P2, may be followed by 139 to 145, RP4# or RP6#,followed by LE, may be followed by 2 or 3, may be followed by A or F, may be followed by S or S2, followed by -AGJ### or -AK1EJ###, may befollowed by -Q, followed by -N, may be followed by optional letter(s) and/or number(s). ($)
Limit swtiches Model(s) WL, may be followed by M, followed by RCA2-, CA2-##, CA-##, CA12-##, CL##-##, CAL##-##, RG2-, G2-##, G12-##, GL##-##, GAL##-##, RCA2-2, CA2-2##, CA-2##, CA12-2##, CL##-2##, CAL##-2##, RCA2-2N, CA2-2##N, CA-2##N, CA12-2##N,CL##-2##N or, CAL##-2##N, RGCA-, GCA2-##, GCA12-##, GCL##-##, GCAL##-##, RCA32-, CA32-###, D###-, D2###-, D3###-,SD###-, SD2###-, SD3###-, NJ-###, NJ-S### or GNJ-###, may be followed by P1, TH or TC55, may be followed by E2 or P2, may befollowed by RP60U, may be followed by G1, G, Y or TS, followed by LD or LR, may be followed by 2 or 3, may be followed by A or F, may befollowed by S or S2, may be followed by -Q, followed by -N, may be followed by optional letter(s) and/or number(s). ($)
Pilot Light Model(s) Series M22N, followed by BN, BP, BG or BC, followed by TR, TG, TY, TW, TA, Or TO, followed by A, followed by R, G, Y, W, A,or O, followed by A, B, C, D, or E, followed by P or blank
Pilot Lights Model(s) Series M30N, followed by MN, MP, MG, or MC, followed by TR, TG, TY, TW, TA, Or TO, followed by A, followed by R, G, Y,W, A, or O, followed by A, B, C, D, or E, followed by P or blank.
Pushbutton Switch Model(s) Series A22N, followed by N, followed by BN, BP, BG, BM, MN, MP, MG, MM, RN, RP, or RM, followed by A or M,followed by NR, NG, NY, NW, NA, NB, UR, UG, UY, UW, UA or UO, followed by A, followed by G or P, followed by 0,1,2,A,B or C, followed by0,1,2,A,B or C, followed by 0,1,2,A,B or C, followed by N, followed by N.
Pushbuttons Switches Model(s) Series A30N, followed by N, followed by MN, MP, MG, or MM, followed by A or M, followed by NR, NG, NY, NW,NA, NB, UR, UG, UY, UW, UA or UO, followed by A, followed by G or P, followed by 0,1,2,A,B or C, followed by 0,1,2,A,B or C, followed by0,1,2,A,B or C, followed by N, followed by N.
Selector Switches Model(s) Series A22N, followed by S, followed by 2B, 2M, 2R, 3B, 3M, or 3R, followed by M, L, R, or B, followed by NR, NG,NY, NW, NA, or NB, followed by A, followed by G or P, followed by 0,1,2,A,B or C, followed by 0,1,2,A,B or C, followed by 0,1,2,A,B or C, followedby N, followed by N.
Series A30N, followed by S, followed by 2M or 3M, followed by M, L, R, or B, followed by NR, NG, NY, NW, NA, or NB, followed by A, followed by Gor P, followed by 0,1,2,A,B or C, followed by 0,1,2,A,B or C, followed by 0,1,2,A,B or C, followed by N, followed by N.
Switch Contact Block Model(s) Series A22N followed by Z, followed by S, followed by G or P, followed by 1 or 2, followed by A,B or C, followedby blank or N.
Investigated to CAN/CSA C22.2. No. 14-10
Auxilary Device Enclosed Model(s) Switches, type D4SL-N; followed by 1, 2, 3 or 4; followed by A, B, C, D, E, F, G, H, J, K, L, M, N, P, Q or R;followed by F or D; followed by A or G; may be followed by C or D; may be followed by 4; followed by C; followed by 1, 3 or 5 may be followed byadditional letter(s) and/or number(s).
Door lock switches Model(s) D4GL, followed by 1, 2, 3 or 4, followed by A thru H or J thru M, followed by B, F, L, R, D, E, G or H, followed by A,G or N, may be followed by A, B or C, may be followed by 4, may be followed by N.*
Door switches Model(s) D4BL Series, followed by 1, 2, 3 or 4, followed by C, D, E or F, followed by A, B C, D, E, F or G, followed by blank, A, B,C, D, E or F, followed by blank, 12-30 or T, followed by blank or up to six letters and/or numbers.
D4BS-11BSF1*, D4BS-11FSF1*, D4BS-11LSF1*, D4BS-11RSF1*
5/25/2018 NKCR7.E76675 - Auxiliary Devices Certified for Canada
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=NKCR7.E76675&ccnshorttitle=Auxiliary+Devices+Certified+for+Canada&objid=
D4GS-N, followed by 1, 2, 3 or 4, followed by R or T, may be followed by 3, 5 or up to two letter and/or numbers, may be followed by up to sixletters and/or numbers.
D4JL, followed by 1, 2, 3 or 4, followed by A thru H, J thru N or P thru R, followed by D or F, followed by A or G, followed by C or D, followed by 5,6, 7, or 8, followed by blank, followed by blank, Y or Z, may be followed by four alphanumeric code, may be followed by six digit maximumalphanumeric code.
D4N 9120GP
D4N, may be followed by A or H, followed by 1 thru 9 or A, B or C, followed by 1, 2 or A thru G, followed by 20, 21, 21-TK, 22 thru 29, 2B, 2C,2D, 2G, 2H, 2J, 2L, 31, 32, 34, 62, 63, 72, 80, 87, RE, LE, AS, BC or AS1, may be followed by R.*
D4NL, followed by 1, 2, 3 or 4, followed by A thru H, J thru N, P or Q, followed by B, D, E, F, G, L or R, followed by A, B, C, D, E, F, G, H, J, K or L,may be followed by A thru F, may be followed by 4, may be followed by S, may be followed by Z.*
D4NS, followed by 1 thru 9 or A, B or C, followed by A thru F, followed by B, D, E, F, G, H, L or R.*
Hand mixers Model(s) KJ-805
Limit switches Model(s) D4A, followed by 3, may be followed by E, followed by 01-06, 07-V, 07-H, 08-12, 14-20 or 24, may be followed by N,followed by GM or KGM.*
D4B, followed by -1, -2, -3, -4, -5, -6, -7 or -8, followed by 1, 2, 3, 4, 5, 6, 7, 8, A, B, C or D, followed by 1 thru 8 or 00, may be followed by upto two numbers or letters, followed by N, may be followed by LD or LE.*
D4B-F, followed by 1, 2, 3 or 4, followed by 1, 2 or 3, followed by 11, 15, 1F or 1R, followed by F, may be followed by 1.*
D4BS, followed by -1, -2, -3, -4, -5, -6, -7 or -8, followed by 5, 6, 7, 8, A or B, followed by F, R, L or B, followed by S, may be followed by LD orLE.*
D4C, followed by 10, 20, 30, A0, C0 or D0, followed by a two digit number, followed by DRAJ01 or ARAJ01.*
D4C-1*, D4C-2*, D4C-3*, D4C-4*, D4C-5*, D4C-6*, D4CC-1*, D4CC-2*, D4CC-3*, D4CC-4*, D4CC-5*, D4CC-6*
D4F, followed by 1 thru 5, followed by 0 or 2, followed by 0, 2, 3, G or H, followed by a number, followed by R, L or D.*
SHL, followed by D, Q or W, with or without 1 or 2 digit number, followed by 55, followed by blank, followed by blank, L, L6 or L7, followed byblank, MD, ML or MR, followed by blank, 2 or 3, followed by blank, TC or TH, followed by blank or 11, followed by blank or T, followed by blank orup to six additional letters and/or numbers.
WL, may be followed by R, followed by C, D, G, H, NJ, or SD, followed by a number, may be followed by LD, followed by GM, KGM or K-GM.*
WL, may be followed by R, may be followed by 01, may be followed by A or B, may be followed by M, followed by C#, D#, G#, H#, NJ#, or SD#where # is up to a ten-digit symbol of letter(s) and/or number(s), may be followed by E2, may be followed by RP, 10, or 31, may be followed byP1, may be followed by 55, may be followed by TC, TC2, TH, or T, may be followed by 13##, RP4##, RP5##, RP6##, or 14##, where ## is aone or two digit symbol of letter(s) and/or number(s), may be followed by G1, G, Y, TS, or C, may be followed by LE, LD, LDN, LR or R, may befollowed by 2 or 3, may be followed by A or F, may be followed by S, may be followed by DGJ###, DTGJ###, DK1CJ###, DK1EJ###,DTK1EJ###, M1J###, M1TJ###, M1GJ###, M1TGJ###, M5J###, DHJS###, AGJ###, AK1EJ####, AK1J###, AK4EJ### or K###, where### is up to a five digit symbol of letter(s) and/or number(s), may be followed by up to a five digit symbol of letter(s) and/or number(s).
ZE, ZV or ZV2, may be followed by -01 or Y, followed by N or Q, followed by six letters and/or numbers, may be followed by 2, may be followedby G, G1, S or Y, may be followed by TC or TH.*
Limit switches, actuator heads Model(s) D4A-0001N*, D4A-0002N*, D4A-0003N*, D4A-0004N*, D4A-0005N*, D4A-0006N*, D4A-0007HN*,D4A-0007VN*, D4A-0008N*, D4A-0009N*, D4A-0010N*, D4A-0011N*, D4A-0012N*, D4A-0014N*, D4A-0015N*, D4A-0016N*, D4A-0017N*,D4A-0018N*, D4A-0019N*, D4A-0020N*, D4A-0024N*
Limit switches, bodies Model(s) D4A-0000N*, D4A-0100N*, D4A-0300N*, D4A-0500N*, D4A-0700N*, D4A-0900N*, D4A-0E00N*
Limit switches, receptacles Model(s) D4A-1000*, D4A-1000N*, D4A-2000*, D4A-2000N*, D4A-3000*, D4A-3000N*, D4A-4000*, D4A-4000N*, D4A-5000*, D4A-5000N*, D4A-6000*, D4A-6000N*
Magnetically actuated switches Model(s) D40B-1B10, D40B-1B3, D40B-1D10, D40B-1D3, D40B-2B10, D40B-2B3, D40B-2D10, D40B-2D3,D40B-3D5C, D40B-3E5C, D40B-A1, D40B-A2, D40B-A3, D40B-J1, D40B-J2, D40B-S1B10, D40B-S1B3, D40B-S1D10, D40B-S1D3, D40B-S2B10,D40B-S2B3, D40B-S2D10, D40B-S2D3, D40B-S3D5C, D40B-S3E5C
Non-contact door switches Model(s) D40A-1C, followed by 2, 5, or a three digit number, may be followed by -F.+
D40Z, followed by 1, followed by C, may be followed by 2 or 5, may be followed by S or A.*
Non-contact door switches, actuators only Model(s) D40A-A1
Non-contact door switches, sensors only Model(s) D40A-A1C2, D40A-A1C5
Pendant enable switches Model(s) A4EG-, followed by B or C, followed by 00, E1, E2, M2, P1 or P2, followed by 0, B, R, Y or G, followed by 0,followed by 1, 2 or 4, followed by 0 or 1, may be followed by SH, may be followed by up to six number(s) and/or letter(s) except for A.
Terminal relays Model(s) F3SP-T01
($) - ##: w/wo Maximum 2 digits number(s), ###: w/wo Maximum 3 digits number(s)
* - May be followed by additional number(s) and/or letter(s).
+ - Additional functional safety investigation was completed to UL 991 and IEC 60947-5-3.
Here are the links to the following OSTI UL Files: NKCR2.E76675 - Auxiliary Devices NKCR8.E76675 - Auxiliary Devices Certified for Canada Put the cursor on the link (underlined & highlighted in blue), press Ctrl, then Click. This will bring you to UL’s Online Directory for that UL File Company Name Category Name Link to File
OMRON CORP Auxiliary Devices - Component NKCR2.E76675
OMRON CORP
Auxiliary Devices Certified for Canada - Component NKCR8.E76675
Here are the links to the following OSTI UL Files: NKCR.E76675 - Auxiliary Devices NKCR7.E76675 - Auxiliary Devices Certified for Canada Put the cursor on the link (underlined & highlighted in blue), press Ctrl, then Click. This will bring you to UL’s Online Directory for that UL File Company Name Category Name Link to File
OMRON CORP Auxiliary Devices NKCR.E76675
OMRON CORP Auxiliary Devices Certified for Canada NKCR7.E76675
OMRON CANADA, INC. • HEAD OFFICEToronto, ON, Canada • 416.286.6465 • 866.986.6766 • www.omron247.com
OMRON ELECTRONICS DE MEXICO • HEAD OFFICEMéxico DF • 52.55.59.01.43.00 • 01-800-226-6766 • [email protected]
OMRON ELECTRONICS DE MEXICO • SALES OFFICEApodaca, N.L. • 52.81.11.56.99.20 • 01-800-226-6766 • [email protected]
OMRON ELETRÔNICA DO BRASIL LTDA • HEAD OFFICESão Paulo, SP, Brasil • 55.11.2101.6300 • www.omron.com.br
OMRON ARGENTINA • SALES OFFICECono Sur • 54.11.4783.5300
OMRON CHILE • SALES OFFICESantiago • 56.9.9917.3920
OTHER OMRON LATIN AMERICA SALES54.11.4783.5300
Authorized Distributor:
J89I-E-01 11/14 Note: Specifications are subject to change. © 2014 Omron Electronics LLC Printed in U.S.A.
Printed on recycled paper.
Automation Control Systems• Machine Automation Controllers (MAC) • Programmable Controllers (PLC) • Operator interfaces (HMI) • Distributed I/O • Software
Drives & Motion Controls • Servo & AC Drives • Motion Controllers & Encoders
Temperature & Process Controllers • Single and Multi-loop Controllers
Sensors & Vision• Proximity Sensors • Photoelectric Sensors • Fiber-Optic Sensors• Amplified Photomicrosensors • Measurement Sensors• Ultrasonic Sensors • Vision Sensors
Industrial Components • RFID/Code Readers • Relays • Pushbuttons & Indicators• Limit and Basic Switches • Timers • Counters • Metering Devices • Power Supplies
Safety • Laser Scanners • Safety Mats • Edges and Bumpers • Programmable Safety Controllers • Light Curtains • Safety Relays • Safety Interlock Switches
OMRON AUTOMATION AND SAFETY • THE AMERICAS HEADQUARTERS • Chicago, IL USA • 847.843.7900 • 800.556.6766 • www.omron247.com
OMRON EUROPE B.V. • Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands. • +31 (0) 23 568 13 00 • www.industrial.omron.eu