norcon archtectural package 4-15-02

Today’s security and isolation booths are often the best step you can take to protect your employees. But do they protect or help maintain your very important good will? Not if clerks and customers have to shout, growl and repeat themselves to be heard or understood. Norcon’s patent pendingTTU-1Talk-Thru Communicator is a 2-way, hands-free audio system that provides high-quality personal communication between people separated by security or isolation barriers. It is the most widely used system of its type in the U.S., and the world.

HOW IT WORKS... The Norcon TTU system permits hands-free communication between the booth attendant and the customer. Vox circuitry facilitates ongoing, clear, 2-way conversation at all times — as if the two parties were together in the same room. The TTU-1 Talk-Thru Communicator now incorporates circuitry to automatically attenuate the outside channel. If the gooseneck microphone is not used for a period of 30 seconds, the outside channel volume will be reduced approximately 70%. Normal operation is restored as soon as the attendant speaks into the gooseneck microphone. The automatic volume

Basic 2-Way Talk Thru™ Electronic Communication System

Norcon TTU Systems TM TTU-1A

© 2002 Norcon Communications Inc.

The Basic Voice Communication System for High-Security and Isolation Booth Situations

attenuation circuit prevents outside noise from bothering the attendant. The TTU-1 provides clear communication even in environments with high ambient noise by shaping the sound for maximum intelligibility. A talk LED indicates the attendants (gooseneck microphone) is activated. Its compression circuitry decreases loud, annoying sounds. The TTU-1A is equipped with a Jack to add a headset or wireless headset. Simply plug the headset in and communicate. The headset contains light weight construction, a boom mic and a single speaker that covers one ear.

HOW TO INSTALL... Installation of the TTU-1A is a very simple, one-person operation. All that’s needed is a 3 - 4 inch cutout in the barrier. All hardware and cable are supplied. Please specify barrier thickness when ordering. The TTU-1A is supplied with a continuous-duty, 117-Volt power supply which is stepped down to 15 Volts.

HOME PAGE ADDRESS: www.talk-thru.com

Norcon TTU-1A Talk Thru System™

FEATURES • Clear 2-way hands-free voice

communication. • Quality electronic design and

engineering. • Avoids shouting, repetition,

misunderstanding. • Rugged, tamper-resistant materials. • Simple, one-person installation. • Compact, contemporary design.

Fits any decor. • Export models available. • Bullet resistant option. • Units available for ADA applications. • Made in U.S.A. • Built in jack for headset • Talk LED indicator SPECIFICATIONS MECHANICAL 1 Outside face plate: Solid

aluminum, anodized finish, tamper-resistant.

2 Control housing (inside): Machined aluminum, anodized finish, tamper resistant.

3 Size : Outside face plate 5 in. dia. x 1/2 in. deep. Inside control housing for housing for UL level 3 BP 5 in. dia x 3 1/2 in. D for UL in. dia. x 3 1/2 in. Deep. Microphone & gooseneck 18” long.(other lengths available)

4 Weight: 4 lbs. 5 Mounting: Partition hole 3

to 4 in. dia. (3 1/2 in. recommended) Specify barrier thickness when ordering.

6 Panel controls: Listen volume, talk volume, on-off switch, headset jack.

ELECTRONIC 1 Audio frequency response:

Selectively shaped for maximum voice intelligibility

2 Audio power:2 Watts per amplifier (2 amplifiers)

3 Distortion:Less than 2% 4 Listen mode:20 dB compression 5 Talk mode:Vox 6 Microphones:Electret 7 Power supply:Input: 120 VAC, 60

Hz Output: 15 VDC, 175 mA Other input power is Available upon request.


Specifications are subject to change without notice.

Other models available

TTU-1AB same as TTU-1A, but with bullet-resistant option (UL 3) Housing depth 2 1/2” TTU-1AJ same as TTU-1A, But with a removable gooseneck microphone. Housing dept 2 1/2” TTU-1AJB same as TTU-1AJ, but with bullet-resistant option (UL 3) Housing dept 3 1/2” TTU-1D Battery operated unit complete with rechargeable batteries and charger. Housing depth is 3 1/2 in. TTU-1DB same as TTU-1D, but with bullet-resistant option (UL 3) Housing dept 4 1/2” TTU-1DJ same as TTU-1D, But with a removable gooseneck microphone. Housing depth 3 1/2” TTU-1DJB same as TTU-1DJ, but with bullet-resistant option (UL 3) Housing dept 4 1/2” TTU-3 Counter mount unit (no need to cut a hole in the glass) 6 “or 12” TTU-HS Headset for TTU products TTU-WHS Wireless headset for TTU products

Talk-Thru systems are shipped complete with cables, instructions, and power supply.

Today’s security and isolation booths are often the best step you can take to protect your employees. But do they protect or help maintain your very important good will? Not if clerks and customers have to shout, growl and repeat themselves to be heard or understood. Norcon’s patent pendingTTU-1 Talk-Thru Communicator is a 2-way, hands-free audio system that provides high-quality personal communication between people separated by security or isolation barriers. It is the most widely used system of its type in the U.S., and the world. The TTU-1AB is UL level 3 ballistic rated bullet resistant.

HOW IT WORKS... The Norcon TTU system permits hands-free communication between the booth attendant and the customer. Vox circuitry facilitates ongoing, clear, 2-way conversation at all times — as if the two parties were together in the same room. The TTU-1 Talk-Thru Communicator now incorporates circuitry to automatically attenuate the outside channel. If the gooseneck microphone is not used for a period of 30 seconds, the outside channel volume will be reduced approximately 70%. Normal operation is restored as soon

Bullet Resistant 2-Way Talk Thru™ Electronic Communication System

Norcon TTU Systems

TM

TTU-1AB


The Basic Voice Communication System for High-Security Bullet Proof Situations

as the attendant speaks into the gooseneck microphone. The automatic volume attenuation circuit prevents outside noise from bothering the attendant. The TTU-1 provides clear communication even in environments with high ambient noise by shaping the sound for maximum intelligibility. A talk LED indicates the atten-dants (gooseneck) Microphone is activated. The compression circuitry decreases loud, annoying sounds. The TTU-1A is equipped with a Jack to add a headset or wireless headset. Simply plug the headset in and communicate. The headset contains light weight construction, a boom mic and a single speaker that covers one ear.

HOW TO INSTALL... Installation of the TTU-1A is a very simple, one-person operation. All that’s needed is a 3 - 4 inch cutout in the barrier. All hardware and cable are supplied. Please specify barrier thickness when ordering. The TTU-1A is supplied with a continuous-duty, 117-Volt power supply which is stepped down to 15 Volts.


Norcon TTU-1AB Talk Thru System™




misunderstanding. • Rugged, tamper-resistant

materials. • Simple, one-person

installation. • Compact, contemporary

design. Fits any decor. • Export models available. • Units available for ADA

applications. • Made in U.S.A. • Built in jack for headset. • Talk LED Indicator. SPECIFICATIONS ELECTRONIC 1. Audio frequency response:


2. Audio power:2 Watts per amplifier (2 amplifiers)

3. Distortion:Less than 2% 4. Listen mode:20 dB

compression 5. Talk mode: Vox 6. Microphones: Electret 7. Power supply:

Input: 120 VAC, 60 Hz Output: 15 VDC, 175 mA Other input power is available upon request




TTU-1A same as TTU-1AB, but without bullet-resistant option Housing depth 2 1/2” TTU-1AJ same as TTU-1A, But with a removable gooseneck microphone. Housing depth 2 1/2” TTU-1AJB same as TTU-1AJ, but with bullet-resistant option (UL Level 3) Housing depth 3 1/2” TTU-1D Battery operated unit complete with rechargeable batteries and charger. Housing depth is 3 1/2 in. TTU-1DB same as TTU-1D, but with bullet-resistant option (UL Level 3) Housing depth is 4 1/2” TTU-1DJ same as TTU-1D, But with a removable gooseneck microphone. Housing depth 3 1/2” TTU-1DJB same as TTU-1DJ, but with bullet-resistant option (UL Level 3) Housing depth is 4 1/2” TTU-3 Counter mount unit (no need to cut a hole in the glass) 6” or 12” TTU-HS Headset for TTU products TTU-WHS Wireless headset for TTU products

Talk-Thru systems are shipped complete with cables, instructions, and power supply.

MECHANICAL 1. Outside face plate: Solid


2. Control housing (inside): Machined aluminum, anodized finish, tamper resistant.

3. Size : Outside face plate 5 in. dia. x 1/2 in. deep. Inside control housing for UL level 3 BP 5 in. dia. x 3 1/2 in. D, for UL level 3 BP 5 in. dia. x 3 1/2 in. Deep. Microphone & gooseneck 18” long.(other lengths available)

4. Weight: 4 lbs. 5. Mounting: Partition hole 3


6. Panel controls: Listen volume, talk volume, on-off switch, headset jack.

Today’s security and isolation booths are often the best step you can take to protect your employees. But do they protect or help maintain your very important good will? Not if clerks and customers have to shout, growl and repeat themselves to be heard or understood. Norcon’s patent pendingTTU-1D Talk-Thru Communicator is a 2-way, hands-free audio system that provides high-quality personal communication between people separated by security or isolation barriers. It is the most widely used system of its type in the U.S., and the world. The TTU-1D is ideal for applications where running a power cable would hinder the cosmetics of the isolation booth.

HOW IT WORKS... The Norcon TTU system permits hands-free communication between the booth attendant and the customer. Vox circuitry facilitates ongoing, clear, 2-way conversation at all times — as if the two parties were together in the same room. The TTU-1D Talk-Thru Communicator now incorporates circuitry to automatically attenuate the outside channel. If the gooseneck microphone is not used for a period of 30 seconds, the outside channel volume will be reduced approximately 70%. Normal operation is restored as soon

Battery Powered 2-Way Talk Thru™ Electronic Communication System

Norcon TTU Systems TM TTU-1D


The Battery Operated Voice Communication System for High-Security and Isolation Booth Situations

as the attendant speaks into the gooseneck microphone. The automatic volume attenuation circuit prevents outside noise from bothering the attendant. The TTU-1D provides clear communication even in environments with high ambient noise by shaping the sound for maximum intelligibility. A talk Led Indi-cates the attendant’s (gooseneck) microphone is acti-vated. The compression circuitry decreases loud, annoying sounds. The TTU-1D is equipped with a Jack to add a headset or wireless headset. Simply plug the headset in and communicate. The headset contains light weight construction, a boom mic and a single speaker that covers one ear.

HOW TO INSTALL... Installation of the TTU-1D is a very simple, one-person operation. All that’s needed is a 3 - 4 inch cutout in the barrier. All hardware and cable are supplied. Please specify barrier thickness when ordering. The TTU-1D is supplied with a PS-2 charger, simply plug the charger into the charger jack located above the headset jack, and charge the


Norcon TTU-1D Talk Thru System™







design. Fits any decor. • Export models available. • Bullet resistant option. • Units available for ADA

applications. • Made in U.S.A. • Built in jack for headset • Talk Led Indicators

SPECIFICATIONS MECHANICAL 1 Outside face plate: Solid


2 Control housing (inside): Machined aluminum, anodized finish, tamper resistant.

3 Size : Outside face plate 5 in. dia. x 1/2 in. deep. Inside control housing 5 in. dia. x 3 1/2 in. Deep. Microphone & gooseneck 18” long.(other lengths available)

4 Weight: 4 lbs. 5 Mounting: Partition hole 3


6 Panel controls: Listen volume, talk volume, on-off switch, headset jack.

ELECTRONIC 1 Audio frequency

response: Selectively shaped for maximum voice intelligibility

2 Audio power: 2 Watts per amplifier (2 amplifiers)

3 Distortion: Less than 2% 4 Listen mode: 20 dB

compression 5 Talk mode: Vox 6 Microphones: Electret 7 Charger: Input: 120 VAC,

60 Hz Output: 15 VDC, 175 mA Other input power is available upon request

8 Batteries: Ni-Cad Batteries Operation time 10 hours Charge time 6 Hrs




TTU-1A Continuous power unit complete . Housing depth is 2 1/2 in. TTU-1AB same as TTU-1A, but with bullet-resistant option (UL3) Housing Depth 3 1/2 In. TTU-1AJ same as TTU-1A, But with a removable gooseneck microphone.Housing depth 2 1/2 in. TTU-1AJB same as TTU-1AJ, but with bullet-resistant option (UL 3)Housing depth 3 1/2 In. TTU-1DB same as TTU-1D, but with bullet-resistant option (UL3)Housing depth 4 1/2” TTU-1DJ same as TTU-1D, But with a removable gooseneck microphone. Housing depth 3 1/2” TTU-1DJB same as TTU-1DJ, but with bullet-resistant option (UL3) Housing depth 4 1/2 In. TTU-3 Counter mount unit (no need to cut a hole in the glass) 6” or 12” TTU-HS Headset for TTU products TTU-WHS Wireless headset for TTU products

Talk-Thru systems are shipped complete with cables, instructions, and battery charger.

There are times when it’s impractical, for various reasons, to cut a 3- to 4- inch hole through an isolation barrier or to mount a communicator in a window or secure gate. But your employees and your customers still have a way to communicate — clearly and calmly. In such cases, the Norcon TTU-3 is the communication system of choice. The prism shaped units of the TTU-3 are ideal for mounting on a counter top on both sides of a barrier. Yet they allow hands free communications through barriers typically found in banks, cashier’s booths, information booths and similar envirornments. The TTU-3 incorporates the same high-quality electronics as the basic Patent Pending Norcon TTU-1 Talk-Thru system. It is a vox system, enabling the attendant and the customer to have hands free two way communication. The TTU-3 provides clear communication even in environments with high ambient noise by shaping the sound for maximum intelligibility. Its compression circuitry decreases loud, annoying sounds. The TTU-3 Talk-Thru Communicator now incorporates circuitry to automatically attenuate the outside channel. If the gooseneck microphone is not used for a period of

Counter-Top 2-Way Talk Thru™ Electronic Communication System

Norcon TTU Systems


The Ideal Counter-Top Communication System Where It is Impractcal to cut a hole in the Barrier

30 seconds, the outside channel volume will be reduced approximately 70%. Normal operation is restored as soon as the attendant speaks into the gooseneck microphone. The automatic volume attenuation circuit prevents outside noise from bothering the attendant. The TTU-3 is equipped with a Jack to add a headset or wireless headset. Simply plug the headset in and communicate. The headset contains light weight construction, a boom mic and a single speaker that covers one ear. HOW TO INSTALL... The TTU-3 comes ready to operate. The prism units are quickly and easily mounted on the counter-top on opposite sides of the barrier. The unit can be positioned back-to-back (as shown), however, it is not required to mount the units against the barrier. The unit can be mounted at a convenient location for the user. A power adapter and all cables are supplied. The TTU-3 is supplied with a continuous-duty, 117-Volt power supply which is stepped down to 15 Volts.


Inside Unit Attendants Side

TTU-3TM

BARRIER

“B” TYPE MOUNTING

BARRIER

Norcon TTU-3 Talk Thru System™

FEATURES • Clear 2-way hands-free

voice communication (vox). • Quality electronic design

and engineering. • Avoids shouting, repetition,



installation. No need to cut a hole in the barrier.

• Compact, contemporary design. Fits any decor.

• Export models available. • Bullet resistant option. • Units available for ADA

applications. • Made in U.S.A. • Built in jack for headset

SPECIFICATIONS MECHANICAL 1 Outside assembly:

121/2 in.W x 23/8 in. H x 23/8 in. D Machined aluminum, clear anodized finish, tamper resistant. weight: 2 LBS.

2 Inside assembly: 121/2 in.W x 23/8 in. H x 23/8 in. D Machined aluminum, clear anodized finish, tamper resistant. weight: 2 LBS.

3 Mounting: countertop 4 Inside assembly Panel

Controls: Listen volume, Talk volume, power on/off, LED power indicator.





3 Distortion: Less than 2%

4 Listen mode: 20 dB compression

5 Talk mode: Vox

6 Microphones: Electret

7 Power supply: Input: 120 VAC, 60 Hz Output: 15 VDC, 175 mA Other input power is available upon request.



TTU-1A Continuous power unit complete . Housing depth is 2 1/2 in. TTU-1AB same as TTU-1A, but with bullet-resistant option (UL Level 1 or 3) TTU-1AJ same as TTU-1A, But with a removable gooseneck microphone. TTU-1AJB same as TTU-1AJ, but with bullet-resistant option (UL Level 1 or 3) TTU-1D Battery operated unit complete with rechargeable batteries and charger. Housing depth is 3 1/2 in. TTU-1DB same as TTU-1D, but with bullet-resistant option (UL Level 1 or 3) TTU-1DJ same as TTU-1D, But with a removable gooseneck microphone. TTU-1DJB same as TTU-1DJ, but with bullet-resistant option (UL Level 1 or 3) TTU-HS Headset for TTU products TTU-WHS Wireless headset for TTU products Talk-Thru systems are shipped complete with cables, instructions, and power supply. Mounting hardware is not included.

MOUNTING DETAILS “A” TYPE MOUNTING

There are times when it’s impractical, for various reasons, to cut a 3- to 4- inch hole through an isolation barrier or to mount a communicator in a window or secure gate. But your employees and your customers still have a way to communicate — clearly and calmly. In such cases, the Norcon TTU-3 is the communication system of choice. The prism shaped units of the TTU-3 are ideal for mounting on a counter top on both sides of a barrier. Yet they allow hands free communications through barriers typically found in banks, cashier’s booths, information booths and similar envirornments. The TTU-3 incorporates the same high-quality electronics as the basic Patent Pending Norcon TTU-1 Talk-Thru system. It is a vox system, enabling the attendant and the customer to have hands free two way communication. The TTU-3 provides clear communication even in environments with high ambient noise by shaping the sound for maximum intelligibility. The compression circuitry decreases loud, annoying sounds. The TTU-3 Talk-Thru Communicator now incorporates circuitry to automatically attenuate the outside channel. If the gooseneck microphone is not used for a period of 30 seconds, the outside channel volume will be reduced

Counter-Top 2-Way Talk Thru™ Electronic Communication

Norcon TTU Systems


The Ideal Counter-Top Communication System Where It is Impractcal to cut a hole in the Barrier

approximately 70%. Normal operation is restored as soon as the attendant speaks into the gooseneck microphone. The automatic volume attenuation circuit prevents outside noise from bothering the attendant. A talk LED indicates the attendant’s microphone is acti-vated. The TTU-3 is equipped with a Jack to add a headset or wireless headset. Simply plug the headset in and communicate. The headset contains light weight construction, a boom mic and a single speaker that covers one ear.

HOW TO INSTALL... The TTU-3 comes ready to operate. The prism units are quickly and easily mounted on the counter-top on opposite sides of the barrier. The unit can be positioned back-to-back (as shown), however, it is not required to mount the units against the barrier. The unit can be mounted at a convenient location for the user. A power adapter and all cables are supplied. The TTU-3 is supplied with a continuous-duty, 117-Volt power supply which is stepped down to 15 Volts DC.

Inside Unit Attendant’s Side

TTU-3TM6 inch


BARRIER


BARRIER


FEATURES • Small design • Clear 2-way hands-free







• Export models available. • Units available for ADA

applications. • Made in U.S.A. • Built in jack for headset

SPECIFICATIONS MECHANICAL 1 Outside assembly:

6 in.W x 23/8 in. H x 23/8 in. D Machined aluminum, clear anodized finish, tamper resistant. weight: 2 LBS.

2 Inside assembly: 6 in.W x 23/8 in. H x 23/8 in. D Machined aluminum, clear anodized finish, tamper resistant. weight: 2 LBS.

3 Mounting: countertop 4 Inside assembly Panel

Controls: Listen volume, Talk volume, power on/off, LED power indicator.


ELECTRONIC 1. Audio frequency

response: Selectively shaped for maximum voice intelligibility.

2. Audio power:2 Watts per amplifier (2 amplifiers)

3. Distortion:Less than 2% 4. Listen mode:20 dB

compression 5. Talk mode:Vox 6. Microphones:Electret 7. Power supply:

Input: 120 VAC, 60 Hz Output: 15 VDC, 175 mA Other input power is available upon request.



TTU-1A Continuous power unit complete . Housing depth is 2 1/2 in. TTU-1AB same as TTU-1A, but with bullet-resistant option (UL 3) Housing depth 3 1/2” TTU-1AJ same as TTU-1A, But with a removable gooseneck microphone.Housing depth 2 1/2” TTU-1AJB same as TTU-1AJ, but with bullet-resistant option (UL 3)Housing depth 3 1/2” TTU-1D Battery operated unit complete with rechargeable batteries and charger. Housing depth is 3 1/2 in. TTU-1DB same as TTU-1D, but with bullet-resistant option (UL 3) Housing depth 4 1/2” TTU-1DJ same as TTU-1D, But with a removable gooseneck microphone. Housing depth 3 1/2” TTU-1DJB same as TTU-1DJ, but with bullet-resistant option (UL 3) Housing depth 4 1/2” TTU-HS Headset for TTU products TTU-3 Standard model same as the TTU-3 -6 inch but 12 1/2 “ long. Talk-Thru systems are shipped complete with cables, instructions, and power supply. Mounting hardware is not included.


During off hours, when there is no attendant at the front counter, employees in the back office still can talk to your customers, by using the Norcon TTU-302. The TTU-302 system includes two 12" prism-shaped inside units (inside unit “A” & inside unit “B”) and one prism shaped outside unit. The inside unit “A” and outside unit are mounted on the front counter and operate the same way as the basic TTU-3. Inside unit “B” is mounted in the remote back office. When the customer visits the front counter during the off hours, the customer can push the “PUSH TO CALL” button which will sound a buzzer in the remote inside unit “B”. Employees will turn on the inside unit “B” and talk to the customer. Both inside unit “A” and inside unit “B” have their own high-quality electronics and individ-ual power supply. The user can turn on the inside unit at any time. When one inside unit is turned on the other in-side unit will be turned off. Only one inside unit will re-main operational at any given time. The TTU-302 incorporates the same high-quality elec-tronics as the basic patent pending Norcon TTU-1 Talk-

Counter-Top 2-Way Talk Thru™ Electronic Communication System

Norcon TTU Systems


Counter-Top 2-Way Talk-Thru Electronic System permitting Off-Hours Back Office Communication

Thru system. It is a vox system, enabling the attendant and the customer to talk and listen giving easy natural conversation. The TTU-302 provides clear communication even in environments with high ambient noise, shaping the sound for maximum intelligibility. Its compression cir-cuitry decreases loud, annoying sounds. HOW TO INSTALL... The TTU-302 comes ready to op-erate. Inside unit “A” and the outside unit are quickly and easily mounted on the counter-top on opposite sides of the barrier. The portion of the unit with the gooseneck microphone and labeled as “A” goes inside the booth, the unit with the “PUSH TO CALL” button is mounted outside. The portion of the unit with the gooseneck microphone and labeled as “B” goes to the back office. An 8 conductors jacketed cable connects unit “A” and unit “B”. The TTU-302 is powered by a continuous-duty AC power supply that is stepped down to 15 Volts.


TTU-302TM

BARRIER


BARRIER



communication (vox). • Quality electronic design and







applications. • Made in U.S.A. SPECIFICATIONS MECHANICAL 1 Outside assembly:

Machined aluminum, anodized finish, tamper-resistant.

2 Inside assemblies: Machined aluminum, anodized finish, tamper-resistant.

3 Size (all 3 assemblies): 12 in.w x 23/8 in. h x 23/8 in. d

4 Weight: 41/2 LBS. 5 Mounting: Counter-top 6 Panel Controls: LISTEN

volume, TALK volume, POWER On/Off (random position on/off), LED power indicator.







5 Talk mode: Vox


7 Power supply: Input: 120 VAC, 60 Hz Output: 15 VDC, 175 mA Other input power is available upon request.



TTU-1A Continuous power unit complete . Housing depth is 2 1/2 in. TTU-1AB same as TTU-1A, but with bullet-resistant option (UL Level 1 or 3) TTU-1AJ same as TTU-1A, But with a removable gooseneck microphone. TTU-1AJB same as TTU-1AJ, but with bullet-resistant option (UL Level 1 or 3) TTU-1D Battery operated unit complete with rechargeable batteries and charger. Housing depth is 3 1/2 in. TTU-1DB same as TTU-1D, but with bullet-resistant option (UL Level 1 or 3) TTU-1DJ same as TTU-1D, But with a removable gooseneck microphone. TTU-1DJB same as TTU-1DJ, but with bullet-resistant option (UL Level 1 or 3) TTU-HS Headset for TTU products TTU-WHS Wireless headset for TTU products Talk-Thru systems are shipped complete with cables, instructions, and power supply. Mounting hardware is not included.


When multiple remote stations are needed to communicate with one master station the TTU-3MS is your best choice. One attendant at the master station can monitor and respond to calls from up to five remote stations. The TTU-3MS allows clear communication to a remote station up to a thousand feet away. The prism shaped master station of the TTU-3MS is ideal for mounting on a counter top. The TTU-3MS incorporates the same high-quality electronics as the basic Patent Pending Norcon Talk Thru system. The TTU-3MS provides clear communication even in environment with high ambient noise by shaping the sound for maximum intelligibility. Its compression circuit decreases loud, annoying sounds. T h e o p e r a t o r c a n i n i t i a t e communication with any remote station by pressing and holding the appropriate push button on the master unit. If two or more push buttons are pressed at the same time the lowest numbered unit will have priority, communication will be allowed to that unit only. A person at one of the remote stations depresses the call origination switch. At the master unit control panel a light will illuminate (and latch) and a buzzer will sound (while the remote switch is pressed) to alert the operator. The operator would respond by pressing and holding the push button switch under the illuminated light (the light extinguishes when the switch is pressed). This enables hands free two way communication between the master unit and the selected remote station.

Substations are available in Surface or Flush Mount.

The prism shaped master station of the TTU-3MS is ideal for mounting on a counter top.

TTU-3MS-5

One attendant at the master station can monitor and respond to calls from up to five remote stations.

Remote stations have a built in microphone, speaker and a push to call switch. Remote stations are housed in a flush mount or surface mount weatherproof enclosure. Amplified handsets with armored cable and a hookswitch are available. Sixth Remote Station When no push button is pressed the master unit will communicate with the sixth remote station. When any push button is pressed the 6th remote station is disconnected and the corresponding remote station will be connected. There is no call origination switch on remote station 6.

High-Security 2-Way Talk Thru™ Electronic Communication

Norcon TTU Systems

TM

TTU-3MS5


Surface mount station shown

Multiple Station Voice Communication System

TECHNICAL INFORMATION HOME PAGE ADDRESS: www.talk-thru.com

Norcon TTU-3MS Talk Thru System™

FEATURES • Clear 2-way hands free voice communication. • Avoids shouting, repetition, misunderstanding. • Up to 5 remote stations. • Weather proof remote stations. • Flush or surface mount remote stations. • Remote push to call switch. • LED indicator for remote station calls. • Quality electronic design and engineering. • Units available for ADA applications. • Made in U.S.A.

SPECIFICATIONS MECHANICAL 1. Master station: 161/2 in.W x 23/8 in. H x 23/8 in. D weight: 2 LBS. 1. Interconnect box: 101/2 in. W x 121/8 in. H x 53/16 in. D weight: 8 LBS. 1. Surface mount Sub-Station: 41/2 in. W x 41/2 in. H x 4 in. D weight: 4 LBS. 1. Flush mount Sub-Station: 6 in. W x 6 in. H x 33/8 in. D weight: 4 LBS. 1. Master Station Panel Controls: Listen volume, Talk volume, power on/off, LED

power indicator, remote call indicators 1-5, remote call selector switches 1-5

ELECTRONIC 1. Audio frequency response:


2. Audio power: 2 Watts per amplifier (2 amplifiers)

3. Distortion: Less than 2%

4. Listen mode: 20 dB compression

5. Talk mode: Vox 6. Microphones: Electret 7. Power supply:


BLOCK DIAGRAM OF COMPLETE SYSTEM


When multiple remote stations are needed to communicate with one master station the TTU-3MS is your best choice. One attendant at the master station can monitor and respond to calls from up to ten remote stations. The TTU-3MS allows clear communication to a remote station up to a thousand feet away. The prism shaped master station of the TTU-3MS is ideal for mounting on a counter top. The TTU-3MS incorporates the same high-quality electronics as the basic Patent Pending Norcon Talk Thru system. The TTU-3MS provides clear communication even in environment with high ambient noise by shaping the sound for maximum intelligibility. Its compression circuit decreases loud, annoying sounds. T h e o p e r a t o r c a n i n i t i a t e communication with any remote station by pressing and holding the appropriate push button on the master unit. If two or more push buttons are pressed at the same time the lowest numbered unit will have priority, communication will be allowed to that unit only. A person at one of the remote stations depresses the call origination switch. At the master unit control panel a light will illuminate (and latch) and a buzzer will sound (while the remote switch is pressed) to alert the operator. The operator would respond by pressing and holding the push button switch under the illuminated light (the light extinguishes when the switch is pressed). This enables hands free two way communication between the master unit and the selected remote station.

Substations are available in Surface or Flush Mount.

The prism shaped master station of the TTU-3MS is ideal for mounting on a counter top.

TTU-3MS-10

One attendant at the master station can monitor and respond to calls from up to ten remote stations.

Remote stations have a built in microphone, speaker and a push to call switch. Remote stations are housed in a flush mount or surface mount weatherproof enclosure. Amplified handsets with armored cable and a hookswitch are available. Ninth Remote Station When no push button is pressed the master unit will communicate with the eleventh remote station. When any push button is pressed the 11th remote station is disconnected and the corresponding remote station will be connected. There is no call origination switch on remote station 11.

High-Security 2-Way Talk Thru™ Electronic Communication

Norcon TTU Systems

TM

TTU-3MS10


Surface mount station shown

Multiple Station Voice Communication System

TECHNICAL INFORMATION HOME PAGE ADDRESS: www.talk-thru.com

Norcon TTU-3MS Talk Thru System™

FEATURES • Clear 2-way hands free voice communication. • Avoids shouting, repetition, misunderstanding. • Up to 10 remote stations. • Weather proof remote stations. • Flush or surface mount remote stations. • Remote push to call switch. • LED indicator for remote station calls. • Quality electronic design and engineering. • Units available for ADA applications. • Made in U.S.A.

SPECIFICATIONS MECHANICAL 1. Master station: 161/2 in.W x 23/8 in. H x 23/8 in. D weight: 2 LBS. 1. Interconnect box: 101/2 in. W x 121/8 in. H x 53/16 in. D weight: 8 LBS. 1. Surface mount Sub-Station: 41/2 in. W x 41/2 in. H x 4 in. D weight: 4 LBS. 1. Flush mount Sub-Station: 6 in. W x 6 in. H x 33/8 in. D weight: 4 LBS. 1. Master Station Panel Controls:

Listen volume, Talk volume, power on/off, LED power indicator, remote call indicators 1-10, remote call selector switches 1-10



2 Audio power:2 Watts per amplifier (2 amplifiers)Distortion:Less than 2%

4 Listen mode:20 dB compression 5 Talk mode:Vox 6 Microphones:Electret 7 Power supply:


BLOCK DIAGRAM OF COMPLETE SYSTEM


The TTU-4 Talk-Thru communication system is particularly suitable for low ambient noise environments that require an unobtrusive, yet tamper-resistant voice communication system. The TTU-4’s counter-mounted design eliminates the need for cutting into a barrier. Its low-profile installation adds a personal dimension to such situations as inmate-to-visitor communications. All the components including the microphones are housed in the sleek, compact units to avoid the hazards that might be encountered in a high-security environment.

HOW IT WORKS... The TTU-4 incorporates the same high-quality electronics as the basic Patent Pending Norcon TTU-1 Talk-Thru system. It is a vox system, enabling the inmate and the visitor to have hands free two way communication. The Norcon TTU-4 provides clear communication, shaping the sound for maximum intelligibility. The compression circuitry decreases loud, annoying sounds. Since the TTU-4 is designed

High-Security 2-Way Talk Thru™ Electronic Communication System

Norcon TTU Systems

TM

TTU-4


Low-Profile Voice Communication System Ideal for High-Security Locations

for applications in security areas, all controls and microphones are recessed to minimize unauthorized adjustment and tampering. All exposed hardware is tamper-resistant.

HOW TO INSTALL... The TTU-4 comes ready to operate. The prism units are quickly and easily mounted on the counter-top on opposite sides of the barrier. They can be positioned back-to-back (as shown) or randomly.Tamper resistant screws are used for both units. A special tool is furnished for these screws. There are two ways to install the TTU-4: either run the cable between the units through a small hole in the barrier, or under the counter-top (as shown on the back page). The TTU-4 uses a continuous-duty, 117-Volt power supply which is stepped down to 15 Volts.






misunderstanding. • No gooseneck microphone

and no external controls. • Rugged, tamper-resistant

materials. • Simple one person

installation. No need to cut hole in barrier.



applications. • Made in U.S.A. SPECIFICATIONS MECHANICAL 1 Outside assembly:

Machined aluminum, anodized finish, tamper-resistant

2 Inside assembly: Machined aluminum, anodized finish, tamper resistant

3 Size (both assemblies): 121/2 in.W x 23/8 in. H x 23/8 in. D

4 Weight: 2.5 lbs. 5 Mounting: Counter-top 6 Panel controls: No external

controls



2 Audio power:2 Watts per amplifier (2 amplifiers)

3 Distortion:Less than 2% 4 Listen mode:20 dB

compression 5 Talk mode:Vox 6 Microphones:Electret 7 Power supply:

Input: 120 VAC, 60 Hz Output: 15 VDC, 175 mA Other input power is available upon request



BARRIER

B A R R IER



Talk-Thru systems are shipped complete with cables, instruction, and power supply. Mounting hardware is not included.

Monitoring the activities of inmates and patients in high-security or sensitive types of areas requires a special kind of communication system. The system must be sen-sitive enough to deliver clear, intelligible communications in high-ambient noise environments. It must be durable enough to withstand a tough environment. And it must provide a measure of control for those responsible for the inmates or patients. The Norcon TTU-5 is specifically designed to achieve this. It is intended for in-wall installations requiring flush-mounting and bullet resistance. It is enclosed in a pair of wall-mounted galvanized steel back boxes with stainless steel rectangular faces.

HOW IT WORKS... The microphone/speaker combination is designed to penetrate high-ambient noise levels. In addition, the TTU-5’s circuitry shapes and enhances the sound for

Flush-Mounted High Security 2-Way Talk-Thru Communication System

Norcon TTU Systems

TM

TTU-5


Flush Wall-Mounted System. Ideal for High-Security Locations.

maximum intelligibility. Its compression circuitry de-creases loud, annoying sounds. The microphone/speaker and controls are flush with the panel, assur-ing a tamper-resistant environment. The operator has access to recessed volume controls.

HOW TO INSTALL... The TTU-5 unit with the controls goes on the corridor side; the other unit on the inmate or patient side. Sim-ply connect the cable provided to the terminal blocks on the stainless steel plates. Then fasten these plates to the back-boxes using the tamper-proof screws and special tool furnished. The panel on the exterior (corridor) side is connected to a continuous-duty, 117-Volt AC power supply which is stepped down to 15 Volts.

HOME PAGE ADDRESS: www.norconcomm.com



voice communication. • Quality electronic design

and engineering. • Avoids shouting,

repetition, misunderstanding.

• No gooseneck microphone and no external controls.

• Rugged, tamper-resistant materials.

• Simple one person installation. No need to cut hole in barrier.

• Provides ongoing activity monitoring as needed.


applications. • Made in U.S.A.

SPECIFICATIONS MECHANICAL 1. Steel Back-boxes

11 1/2 in H x 3 1/2 in W x 2 in D

2. Face Plates: 0.0625 in. Stainless steel stan-dard. (Other gauges available.) 13 5/8 in. H x 4 1/2 in. W

3. Weight: Depends on gauge and type of material.

4. Mounting: Back-boxes recessed in barrier wall.

5. Panel controls: Exterior (corridor) panel only—on-off witch, recessed listen volume, and recessed talk vol-ume.



Talk-Thru systems are shipped complete with back-boxes, mounting hardware, instructions, and power sup-ply. Bullet-resistant shield rated up to .357 Magnum service loads.



2 Audio power: 2 Watts per amplifier



5 Talk mode: Vox


7 Power supply: Input: 120 VAC, 60 Hz Output: 15 VDC, 175 mA

Other input power is available upon request

For those times when it’s impractical, for various reasons, to mount the inside control section of a communicator in a window with a secure gate the Norcon TTU-7 is the communication system of choice. The prism shaped control unit of the TTU-7 is ideal for mounting on a counter top on the interior side of a barrier. The system allows hands free communications through barriers typically found in banks, cashier’s booths, information booths and similar envirornments. The TTU-7 incorporates the same high-quality electronics as the basic Patent Pending Norcon TTU-1 Talk-Thru system. It is a vox system, enabling the attendant and the customer to have hands free two way communication. The TTU-7 provides clear communication even in environments with high ambient noise by shaping the sound for maximum intelligibility. The compression circuitry decreases loud, annoying sounds. The TTU-7 Talk-Thru Communicator now incorporates circuitry to automatically attenuate the outside channel. If the gooseneck microphone is not used for a period of 30 seconds, the outside channel volume will be reduced approximately 70%. Normal operation is restored as

2-Way Talk Thru™ Electronic Communication System

Norcon TTU Systems


The Ideal Communication System for problem installations where a security gate or shade is used

soon as the attendant speaks into the gooseneck microphone. The automatic volume attenuation circuit prevents outside noise from bothering the attendant. A talk LED indicates the attendant’s (gooseneck) micro-phone is activated. The TTU-7 is equipped with a Jack to add a headset or wireless microphone. Simply plug the headset in and communicate. The headset contains light weight construction, a boom mic and a single speaker that covers one ear.

HOW TO INSTALL...

Installation of the TTU-7 is a very simple, one-person operation. All that’s needed is a 3 - 4 inch cutout in the barrier. All hardware and cable are supplied. Please specify barrier thickness when ordering. The prism unit is quickly and easily mounted on the counter-top on the inside of the barrier, at a convenient location for the user. A power adapter and all cables are supplied. The TTU-7 is supplied with a continuous-duty, 117-Volt power supply which is stepped down to 15 Volts.


TTU-7TM








design. Fits any decor. • Export models available. • Bullet resistant option. • Units available for ADA

applications. • Made in U.S.A. • Built in jack for headset SPECIFICATIONS

MECHANICAL

1 Outside assembly: 5 in. dia x 1/2 in. deep solid aluminum outside. 1 in.deep inside clear anodized finish, tamper resistant.

2 Inside assembly: 6 in. W x 23/8 in. H x 23/8 in. D Machined aluminum, clear anodized finish, tamper resistant. weight: 2 LBS.

3 Mounting: window /countertopInside assembly Panel Controls: Listen volume, Talk volume, power on/off, LED power indicator.

ELECTRONIC 1. Audio frequency

response: Selectively shaped for

maximum voice intelligibility 2. Audio power:2 Watts per

amplifier (2 amplifiers) 3. Distortion:Less than 2% 4. Listen mode:20 dB

compression 5. Talk mode:Vox 6. Microphones:Electret 7. Power supply:Input: 120

VAC, 60 Hz Output: 15 VDC, 175 mA

Other input power is available upon request.

Talk-Thru systems are shipped

complete with cables, instruc-tions, and power supplies. Mounting hardware is not included.

Specifications are subject to

change without notice.



TTU-1A Continuous power unit complete . Housing depth is 2 1/2 in. TTU-1AB same as TTU-1A, but with bullet-resistant option (UL 3) Housing depth 3 1/2” TTU-1AJ same as TTU-1A, But with a removable gooseneck microphone. Housing depth 2 1/2” TTU-1AJB same as TTU-1AJ, but with bullet-resistant option (UL 3) Housing depth 3 1/2” TTU-1D Battery operated unit complete with rechargeable batteries and charger. Housing depth is 3 1/2 in. TTU-1DB same as TTU-1D, but with bullet-resistant option (UL 3) Housing depth 4 1/2” TTU-1DJ same as TTU-1D, But with a removable gooseneck microphone. Housing depth 3 1/2” TTU-1DJB same as TTU-1DJ, but with bullet-resistant option (UL 3) Housing depth 4 1/2” TTU-HS Headset for TTU products TTU-WHS Wireless headset for TTU products

norcon archtectural package 4-15-02

Documents