norland ozone systemsnorlandintl.com/wp-content/uploads/2016/07/ozone-uv-treatment.pdf ·...

2
Norland's side-stream ozone systems are complete frame-mounted modules designed specifically for high-quality bottled water operations. Two standard systems are available: The SSOZ-25A produces enough ozone to treat up to 25 gallons (95 L) per minute. The SSOZ-50A produces up to 50 gallons (189 L) per minute. Larger-capacity systems are available on request. These compact systems are designed to keep ozone residual levels from 0.1-0.4 mg/L. The system utilizes an air-cooled, patented “Cold Spark” Corona Discharge Generator. This technology allows the production of a high concentration of ozone while generating very little heat, eliminating the need for additional water-cooling mechanisms for the ozone tubes. Norland's “side-stream” ozone systems are reliable, cost-efficient and easy to maintain. In this process, product water is drawn from a storage tank by the integral stainless steel repressurization pump. Part of the water flowing through this pump is “side-streamed” through another stainless steel pump, which drives the water through a Venturi Injector Assembly where ozone is injected into the water. This side-stream of ozonated water is then routed to the contact tank, where it is mixed well with the main flow of product water from the repressurization pump before delivery to a filler system. Standard 25- and 50-gal (95 and 189 L)/min Models High Ozone Production Kills Bacteria in Water Improves Taste of Water Norland Ozone Systems for the Bottled Water Business

Upload: others

Post on 20-Mar-2020

22 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Norland Ozone Systemsnorlandintl.com/wp-content/uploads/2016/07/OZone-UV-Treatment.pdf · Norland's “side-stream” ozone systems are reliable, cost-efficient and easy to maintain

Norland's side-stream ozone systems are complete frame-mounted modules designedspecifically for high-quality bottled water operations. Two standard systems areavailable: The SSOZ-25A produces enoughozone to treat up to 25 gallons (95 L) perminute. The SSOZ-50A produces up to 50gallons (189 L) per minute. Larger-capacitysystems are available on request. Thesecompact systems are designed to keepozone residual levels from 0.1-0.4 mg/L.The system utilizes an air-cooled, patented“Cold Spark” Corona Discharge Generator. This technology allows the production of ahigh concentration of ozone while generatingvery little heat, eliminating the need foradditional water-cooling mechanisms forthe ozone tubes.

Norland's “side-stream” ozone systemsare reliable, cost-efficient and easy tomaintain. In this process, product wateris drawn from a storage tank by the integral stainless steel repressurizationpump. Part of the water flowing throughthis pump is “side-streamed” throughanother stainless steel pump, whichdrives the water through a VenturiInjector Assembly where ozone is injectedinto the water. This side-stream ofozonated water is then routed to the contact tank, where it is mixed well withthe main flow of product water from therepressurization pump before delivery toa filler system.

• Standard 25- and 50-gal (95 and 189 L)/min Models

• High Ozone Production

• Kills Bacteria in Water

• Improves Taste of Water

Norland Ozone Systems for the Bottled Water Business

Page 2: Norland Ozone Systemsnorlandintl.com/wp-content/uploads/2016/07/OZone-UV-Treatment.pdf · Norland's “side-stream” ozone systems are reliable, cost-efficient and easy to maintain

Standard System Features

Norland's SSOZ-25A and SSOZ-50A OzoneSystems are designed to provide effective mixing and mass transfer of the ozone andproduct water prior to entering the filler. Thestainless steel contact tank further increasesthe effectiveness level of ozone in the productwater by allowing adequate contact time ofozone with the product water.• Standard 25-gal (95 L) and 50-gal

(189 L)/ min. output; larger versions available• Designed to meet IBWA-recommended ozone

level in product water • Stainless Steel Frame• Air-cooled, high-frequency Corona

discharge ozone generator• Automatic high-capacity oxygen concentrator• 25-gal (95 L) per min. model: 55-gal (208 L)

stainless steel contact tank.• 50-gal (95 L)/min. model: 100-gal (378 L)

stainless steel contact tank• Venturi Injector Assembly with by-pass• Schedule 80 PVC plumbing components• Vacuum safety control• Produces up to 4 grams per hour

(25 gal/95 L) per min. model; Up to 10 grams per hour (50 gal/189 L) per min. model)

• Ozone monitor/controller unit• Limited 12-month warranty

Additional details on request. Call 402-441-3737, visit our web site at www.norlandintl.com or e-mail us at [email protected]

P.O. Box 67189 • Lincoln, NE 68506 USAPhone: (402) 441-3737 • FAX: (402) 441-3736E-mail: [email protected] • www.norlandintl.com©2007 Norland Int’l. Inc. Printed in USA. 0607LL

SystemControls

OzoneMonitor

MainRepressurizationPump

Side-streamOzone Pump

Oxygen concentrator

OzoneGenerator

StainlessSteelContactTank

OzoneInjectorAssembly

Side-stream Ozone SystemsStandard Specifications

SSOZ-25A SSOZ-50A

Height 65" (165 cm) 87" (221 cm)

Width 48" (127 cm) 48" (127 cm)

Depth 44" (112 cm) 44" (112 cm)

Weight 420 lb (120 kg) 509 lb (239 kg)

Electrical

Voltage: 208-240 volt; 208-240 volt; 50/60 Hz 50/60 Hz

Phase: Single* Single*

Amps 25 connected load 30 connected load

*Three-phase available upon request.