nota pengantar statistik bab 2
DESCRIPTION
sesuai untuk budak uuTRANSCRIPT
QQS1013 Elementary Statistics
DESCRIPTIVE DESCRIPTIVE STATISTICS
2.1 INTRODUCTION
Raw data - Data recorded in the sequence in which there are
collected and before they are processed or ranked
Array data - Raw data that is arranged in ascending or descending order.
Here is a list of question asked in a large statistics class and the “raw data” given by one of the students:
1. What is your sex (m=male, f=female)?Answer : m
2. How many hours did you sleep last night?Answer: 5 hours
3. Randomly pick a letter – S or Q.Answer: S
4. What is your height in inches?Answer: 67 inches
5. What’s the fastest you’ve ever driven a car (mph)?Answer: 110 mph
Chapter 2: Descriptive Statistics 1
Exampl
e 2
Exampl
e 1
QQS1013 Elementary Statistics
Quantitative raw data Qualitative raw data
These data also called ungrouped data.
2.2 ORGANIZING AND GRAPHING QUALITATIVE DATA
2.2.1 Frequency Distributions Table
A frequency distribution for qualitative data lists all categories and the
number of elements that belong to each of the categories.
It exhibits the frequencies are distributed over various categories
Also called as a frequency distribution table or simply a frequency
table.
e.g. : The number of students who belong to a certain category is called
the frequency of that category.
2.2.2 Relative Frequency and Percentage Distribution
Chapter 2: Descriptive Statistics 2
QQS1013 Elementary Statistics
A relative frequency distribution is a listing of all categories along with their
relative frequencies (given as proportions or percentages).
It is commonplace to give the frequency and relative frequency distribution
together.
Calculating relative frequency and percentage of a category
Relative Frequency of a category
= Frequency of that category Sum of all frequencies
Percentage (%) = (Relative Frequency)* 100
A sample of UUM staff-owned vehicles produced by Proton was identified and the make of each noted. The resulting sample follows (W = Wira, Is = Iswara, Wj = Waja, St = Satria, P = Perdana, Sv = Savvy):
Construct a frequency distribution table for these data with their relative frequency and percentage.
W W P Is Is P Is W St Wj
Is W W Wj Is W W Is W Wj
Wj Is Wj Sv W W W Wj St W
Wj Sv W Is P Sv Wj Wj W W
St W W W W St St P Wj Sv
Solution:
Category FrequencyRelative
FrequencyPercentage (%)
Wira 19 19/50 = 0.38 0.38*100 = 38
Chapter 2: Descriptive Statistics
Exampl
e 3
FORMULA
3
QQS1013 Elementary Statistics
Iswara 8 0.16 16
Perdana 4 0.08 8
Waja 10 0.20 20
Satria 5 0.10 10
Savvy 4 0.08 8
Total 50 1.00 100
2.2.3 Graphical Presentation of Qualitative Data
a) Bar Graphs
A graph made of bars whose heights represent the frequencies of
respective categories.
Such a graph is most helpful when you have many categories to
represent.
Notice that a gap is inserted between each of the bars.
It has
o simple/ vertical bar chart
o horizontal bar chart
o component bar chart
o multiple bar chart
Simple/ Vertical Bar Chart
To construct a vertical bar chart, mark the various categories on the horizontal
axis and mark the frequencies on the vertical axis
Chapter 2: Descriptive Statistics 4
QQS1013 Elementary Statistics
Horizontal Bar Chart
To construct a horizontal bar chart, mark the various categories on the vertical
axis and mark the frequencies on the horizontal axis.
Component Bar Chart
To construct a component bar chart, all categories is in one bar and every
bar is divided into components.
The height of components should be tally with representative frequencies.
Suppose we want to illustrate the information below, representing the number of people participating in the activities offered by an outdoor pursuits centre during Jun of three consecutive years.
2004 2005 2006Climbing 21 34 36Caving 10 12 21Walking 75 85 100Sailing 36 36 40
Total 142 167 191
Solution:
Chapter 2: Descriptive Statistics
Exampl
e 4
5
QQS1013 Elementary Statistics
Multiple Bar Chart
To construct a multiple bar chart, each bars that representative any
categories are gathered in groups.
The height of the bar represented the frequencies of categories.
Useful for making comparisons (two or more values).
The bar graphs for relative frequency and percentage distributions can be
drawn simply by marking the relative frequencies or percentages, instead of
the class frequencies.
b) Pie Chart
A circle divided into portions that represent the relative frequencies or
percentages of a population or a sample belonging to different
categories.
An alternative to the bar chart and useful for summarizing a single
categorical variable if there are not too many categories.
The chart makes it easy to compare relative sizes of each
class/category.
Chapter 2: Descriptive Statistics 6
QQS1013 Elementary Statistics
The whole pie represents the total sample or population. The pie is
divided into different portions that represent the different categories.
To construct a pie chart, we multiply 360o by the relative frequency for
each category to obtain the degree measure or size of the angle for the
corresponding categories.
Movie Genres
Frequency Relative Frequency Angle Size
ComedyActionRomanceDramaHorrorForeignScience Fiction
54362828221616
0.270.180.140.140.110.080.08
360*0.27=97.2o
360*0.18=64.8o
360*0.14=50.4o
360*0.14=50.4o
360*0.11=39.6o
360*0.08=28.8o
360*0.08=28.8o
Total 200 1.00 360o
Chapter 2: Descriptive Statistics
Exampl
e 5
7
QQS1013 Elementary Statistics
c) Line Graph/Time Series Graph
A graph represents data that occur over a specific period time of time.
Line graphs are more popular than all other graphs combined because
their visual characteristics reveal data trends clearly and these graphs
are easy to create.
When analyzing the graph, look for a trend or pattern that occurs over
the time period.
Example is the line ascending (indicating an increase over time) or
descending (indicating a decrease over time).
Another thing to look for is the slope, or steepness, of the line. A line
that is steep over a specific time period indicates a rapid increase or
decrease over that period.
Two data sets can be compared on the same graph (called a
compound time series graph) if two lines are used.
Data collected on the same element for the same variable at different
points in time or for different periods of time are called time series data.
A line graph is a visual comparison of how two variables—shown on the
x- and y-axes—are related or vary with each other. It shows related
information by drawing a continuous line between all the points on a
grid.
Line graphs compare two variables: one is plotted along the x-axis
(horizontal) and the other along the y-axis (vertical).
The y-axis in a line graph usually indicates quantity (e.g., RM, numbers
of sales litres) or percentage, while the horizontal x-axis often measures
units of time. As a result, the line graph is often viewed as a time series
graph
Chapter 2: Descriptive Statistics
Exampl
e 6 8
QQS1013 Elementary Statistics
A transit manager wishes to use the following data for a presentation showing how Port Authority Transit ridership has changed over the years. Draw a time series graph for the data and summarize the findings.
YearRidership
(in millions)19901991199219931994
88.085.075.776.675.4
Solution:
The graph shows a decline in ridership through 1992 and then leveling off for the years 1993 and 1994.
EXERCISE 1
Chapter 2: Descriptive Statistics 9
QQS1013 Elementary Statistics
1. The following data show the method of payment by 16 customers in a supermarket checkout line. ( C = cash, CK = check, CC = credit card, D = debit and O = other ).
C CK CK C CC D O CCK CC D CC C CK CK CC
a. Construct a frequency distribution table.b. Calculate the relative frequencies and percentages for all categories.c. Draw a pie chart for the percentage distribution.
2. The frequency distribution table represents the sale of certain product in ZeeZee Company. Each of the products was given the frequency of the sales in certain period. Find the relative frequency and the percentage of each product. Then, construct a pie chart using the obtained information.
Type of Product
Frequency Relative Frequency Percentage Angle Size
ABCDE
131259
113. Draw a time series graph to represent the data for the number of worldwide airline
fatalities for the given years.
Year 1990 1991 1992 1993 1994 1995 1996No. of fatalities
440 510 990 801 732 557 1132
4. A questionnaire about how people get news resulted in the following information from 25 respondents (N = newspaper, T = television, R = radio, M = magazine).
N N R T TR N T M RM M N R NT R M N MT R R N N
a. Construct a frequency distribution for the data.b. Construct a bar graph for the data.
5. The given information shows the export and import trade in million RM for four months of sales in certain year. Using the provided information, present this data in component bar graph.
Month Export ImportSeptember
OctoberNovemberDecember
28303224
20281714
6. The following information represents the maximum rain fall in millimeter (mm) in each state in Malaysia. You are supposed to help a
Chapter 2: Descriptive Statistics 10
QQS1013 Elementary Statistics
meteorologist in your place to make an analysis. Based on your knowledge, present this information using the most appropriate chart and give your comment.
State Quantity (mm)
PerlisKedahPulau PinangPerakSelangorWilayah Persekutuan Kuala LumpurNegeri SembilanMelakaJohorPahangTerengganuKelantanSarawakSabah
435512163721664
1003390223876
10501255986878456
2.3 ORGANIZING AND GRAPHING QUANTITATIVE DATA
2.3.1 Stem-and-Leaf Display
In stem and leaf display of quantitative data, each value is divided into two
portions – a stem and a leaf. Then the leaves for each stem are shown
separately in a display.
Gives the information of data pattern.
Can detect which value frequently repeated.
25 12 9 10 5 12 23 736 13 11 12 31 28 37 614 41 38 44 13 22 18 19
Solution:
0 9 5 7 61 2 0 2 3 1 2 4 3 8 92 5 3 8 23 6 1 7 84 1 4
2.3.2 Frequency Distributions
Chapter 2: Descriptive Statistics
Exampl
e 7
11
QQS1013 Elementary Statistics
A frequency distribution for quantitative data lists all the classes and the
number of values that belong to each class.
Data presented in form of frequency distribution are called grouped data.
The class boundary is given by the midpoint of the upper limit of one
class and the lower limit of the next class. Also called real class limit.
To find the midpoint of the upper limit of the first class and the lower limit
of the second class, we divide the sum of these two limits by 2.
e.g.:
Class Width (class size)
Class width = Upper boundary – Lower boundary
e.g. : Width of the first class = 600.5 – 400.5 = 200
Class Midpoint or Mark
Chapter 2: Descriptive Statistics
class boundary
FORMULA
FORMULA
12
QQS1013 Elementary Statistics
e.g:
Constructing Frequency Distribution Tables
1. To decide the number of classes, we used Sturge’s formula, which is
c = 1 + 3.3 log n
where c is the no. of classes
n is the no. of observations in the data set.
2. Class width,
This class width is rounded up to a convenient number.
3. Lower Limit of the First Class or the Starting Point Use the smallest value in the data set.
Chapter 2: Descriptive Statistics
Exampl
e 8
FORMULA
FORMULA
13
QQS1013 Elementary Statistics
The following data give the total home runs hit by all players of each of the 30 Major League Baseball teams during 2004 season.
i) Number of classes, c = 1 + 3.3 log 30 = 1 + 3.3(1.48)
= 5.89 6 class
ii) Class width,
iii) Starting Point = 135
Table 2.10 : Frequency Distribution for Data of Table 2.9Total Home Runs Tally f
135 – 153153 – 171171 – 189189 – 207207 – 225225 – 242
|||| |||||||||| |||| ||||||||
1025634
2.3.3 Relative Frequency and Percentage Distributions
Chapter 2: Descriptive Statistics
FORMULA
14
QQS1013 Elementary Statistics
(Refer example 8)
Table 2.11: Relative Frequency and Percentage Distributions
Total Home Runs Class BoundariesRelative
Frequency%
135 – 153153 – 171171 – 189189 – 207207 – 225225 – 242
134.5 less than 152.5152.5 less than 170.5170.5 less than 188.5188.5 less than 206.5206.5 less than 224.5224.5 less than 242.5
0.33330.06670.16670.20000.10000.1333
33.33 6.6716.6720.0010.0013.33
Total 1.0 100%
2.3.4 Graphing Grouped Data
a) Histograms
A histogram is a graph in which the class boundaries are marked on the
horizontal axis and either the frequencies, relative frequencies, or percentages
are marked on the vertical axis. The frequencies, relative frequencies or
percentages are represented by the heights of the bars.
In histogram, the bars are drawn adjacent to each other and there is a space
between y axis and the first bar.
(Refer example 8)
Frequency histogram for Table 2.9
b) Polygon
A graph formed by joining the midpoints of the tops of successive bars in a
histogram with straight lines is called a polygon.
Chapter 2: Descriptive Statistics
134.5 152.5 170.5 188.5 206.5 224.5 242.5
Exampl
e 9
Exampl
e 10
15
0
2
4
6
8
10
12
1 Total home runs
Fre
qu
en
cy
QQS1013 Elementary Statistics
Frequency polygon for Table 2.11
For a very large data set, as the number of classes is increased (and the width of
classes is decreased), the frequency polygon eventually becomes a smooth
curve called a frequency distribution curve or simply a frequency curve.
Frequency distribution curve
c) Shape of Histogram
Same as polygon.
For a very large data set, as the number of classes is increased (and the width
of classes is decreased), the frequency polygon eventually becomes a smooth
curve called a frequency distribution curve or simply a frequency curve.
The most common of shapes are:
(i) Symmetric
(ii) Right skewed
(iii) Left skewed
Chapter 2: Descriptive Statistics
Exampl
e 11
134.5 152.5 170.5 188.5 206.5 224.5 242.5
16
QQS1013 Elementary Statistics
Symmetric histograms
Right skewed and Left skewed
Describing data using graphs helps us insight into the main characteristics of the
data.
When interpreting a graph, we should be very cautious. We should observe
carefully whether the frequency axis has been truncated or whether any axis has
been unnecessarily shortened or stretched.
2.3.5 Cumulative Frequency Distributions
A cumulative frequency distribution gives the total number of values that
fall below the upper boundary of each class.
Chapter 2: Descriptive Statistics
Exampl
e 1217
QQS1013 Elementary Statistics
Using the frequency distribution of table 2.11,
Total Home Runs
Class Boundaries fCumulative Frequency
135 – 152153 – 170171 – 188189 – 206207 – 224225 – 242
134.5 less than 152.5152.5 less than 170.5170.5 less than 188.5188.5 less than 206.5206.5 less than 224.5224.5 less than 242.5
10 2 5 6 3 4
1010+2=1210+2+5=1710+2+5+6=2310+2+5+6+3=2610+2+5+6+3+4=30
Ogive
An ogive is a curve drawn for the cumulative frequency distribution by joining
with straight lines the dots marked above the upper boundaries of classes at
heights equal to the cumulative frequencies of respective classes.
Two type of ogive:
(i) ogive less than(ii) ogive greater than
First, build a table of cumulative frequency.
(Ogive Less Than)Earnings
(RM)Number of students (f) Earnings (RM)
CumulativeFrequency (F)
30 – 39 5 Less than 29.5 040 – 49 6 Less than 39.5 550 – 59 6 Less than 49.5 1160 - 69 3 Less than 59.5 1770 – 79 3 Less than 69.5 2080 - 89 7 Less than 79.5 23
Less than 89.5 30Total 30
Graph Ogive Less Than
Chapter 2: Descriptive Statistics
Exampl
e 13
0
5
10
15
20
25
30
35
29.5 39.5 49.5 59.5 69.5 79.5 89.5
Cu
mu
lati
ve F
req
uen
cy
Earnings
18
QQS1013 Elementary Statistics
(Ogive More Than)
Earnings (RM)
Number of students (f) Earnings (RM)
CumulativeFrequency (F)
30 – 39 5 More than 29.5 3040 – 49 6 More than 39.5 2550 – 59 6 More than 49.5 1960 - 69 3 More than 59.5 1370 – 79 3 More than 69.5 1080 - 89 7 More than 79.5 7
More than 89.5 0Total 30
Graph Ogive More Than
2.3.6 Box-Plot
Describe the analyze data graphically using 5 measurement: smallest
value, first quartile (K1), second quartile (median or K2), third quartile
(K3) and largest value.
Chapter 2: Descriptive Statistics
0
5
10
15
20
25
30
35
29.5 39.5 49.5 59.5 69.5 79.5 89.5
Earnings
Cumulative Frequency
Exampl
e 14
19
QQS1013 Elementary Statistics
2.4 MEASURES OF CENTRAL TENDENCY
2.4.1 Ungrouped Data Measurement
Mean
Mean for population data:
Mean for sample data:
where: = the sum of all values
N = the population size n = the sample size,
µ = the population mean
= the sample mean
The following data give the prices (rounded to thousand RM) of five homes sold recently in Sekayang.
158 189 265 127 191
Chapter 2: Descriptive Statistics
Smallest value
Largest value
K1 Median K3
Largest value
K1 Median K3
Largest value
K1 Median K3
Smallest value
Smallest value
For symmetry data
For left skewed data
For right skewed data
Exampl
e 15
FORMULA
20
QQS1013 Elementary Statistics
Find the mean sale price for these homes.
Solution:
Thus, these five homes were sold for an average price of RM186 thousand @ RM186 000.
The mean has the advantage that its calculation includes each value of the data set.
Weighted Mean
Used when have different needs.
Weight mean :
where w is a weight.
Consider the data of electricity components purchasing from a factory in the table below:
Chapter 2: Descriptive Statistics
Exampl
e 16
FORMULA
21
QQS1013 Elementary Statistics
Type Number of component (w) Cost/unit (x)
12345
1200 50025001000 800
RM3.00RM3.40RM2.80RM2.90RM3.25
Total 6000
Solution:
Mean cost of a unit of the component is RM2.97
Median
Median is the value of the middle term in a data set that has been
ranked in increasing order.
Procedure for finding the Median
Step 1: Rank the data set in increasing order.
Step 2: Determine the depth (position or location) of the median.
Step 3: Determine the value of the Median.
Find the median for the following data:10 5 19 8 3
Solution:
Chapter 2: Descriptive Statistics
Exampl
e 17
FORMULA
22
QQS1013 Elementary Statistics
(1) Rank the data in increasing order
3 5 8 10 19
(2) Determine the depth of the Median
(3) Determine the value of the median
Therefore the median is located in third position of the data set.
3 5 8 10 19
Hence, the Median for above data = 8
Find the median for the following data:10 5 19 8 3 15
Solution:
(1) Rank the data in increasing order
3 5 8 10 15 19 (2) Determine the depth of the Median
(3) Determine the value of the Median
Therefore the median is located in the middle of 3rd position and 4th
position of the data set.
Hence, the Median for the above data = 9 The median gives the center of a histogram, with half of the data values
to the left of (or, less than) the median and half to the right of (or, more
than) the median.
The advantage of using the median is that it is not influenced by outliers.
Chapter 2: Descriptive Statistics
Exampl
e 18
23
QQS1013 Elementary Statistics
Mode
Mode is the value that occurs with the highest frequency in a data set.
1. What is the mode for given data? 77 69 74 81 71 68 74 73
2. What is the mode for given data? 77 69 68 74 81 71 68 74 73
Solution:
1. Mode = 74 (this number occurs twice): Unimodal
2. Mode = 68 and 74: Bimodal
A major shortcoming of the mode is that a data set may have none or
may have more than one mode.
One advantage of the mode is that it can be calculated for both kinds of
data, quantitative and qualitative.
2.4.2 Grouped Data Measurement
Mean
Mean for population data:
Mean for sample data:
Where the midpoint and f is the frequency of a class.
The following table gives the frequency distribution of the number of orders received each day during the past 50 days at the office of a mail-order company. Calculate the mean.
Chapter 2: Descriptive Statistics
Number of order f
10 – 1213 – 1516 – 1819 – 21
4122014
n = 50
Exampl
e 19
Exampl
e 20
FORMULA
24
QQS1013 Elementary Statistics
Solution:
Because the data set includes only 50 days, it represents a sample. The value of
is calculated in the following table:
Number of order f x fx
10 – 1213 – 1516 – 1819 – 21
4122014
11141720
44168340280
n = 50 = 832
The value of mean sample is:
Thus, this mail-order company received an average of 16.64 orders per day during these 50 days.
Median
Step 1: Construct the cumulative frequency distribution.
Step 2: Decide the class that contain the median.
Class Median is the first class with the value of cumulative frequency is
at least n/2.
Step 3: Find the median by using the following formula:
Based on the grouped data below, find the median:
Time to travel to work Frequency
Chapter 2: Descriptive Statistics
Where:n = the total frequencyF = the total frequency before class
mediani = the class width
mL = the lower boundary of the class median
mf = the frequency of the class median
Exampl
e 21
FORMULA
25
QQS1013 Elementary Statistics
1 – 1011 – 2021 – 3031 – 4041 – 50
8141297
Solution:
1st Step: Construct the cumulative frequency distribution
Time to travel to work Frequency Cumulative Frequency
1 – 1011 – 2021 – 3031 – 4041 – 50
8141297
822344350
class median is the 3rd class
So, F = 22 , = 12, = 21.5 and i = 10
Therefore,
Thus, 25 persons take less than 24 minutes to travel to work and another 25 persons take more than 24 minutes to travel to work.
Mode
Mode is the value that has the highest frequency in a data set.
Chapter 2: Descriptive Statistics 26
QQS1013 Elementary Statistics
For grouped data, class mode (or, modal class) is the class with the
highest frequency.
Formula of mode for grouped data:
Where:
is the lower boundary of class mode
is the difference between the frequency of class mode and the frequency of the class before the class mode
is the difference between the frequency of class mode and the frequency of the class after the class mode
i is the class width
Based on the grouped data below, find the mode
Time to travel to work Frequency1 – 10
11 – 2021 – 3031 – 4041 – 50
8141297
Solution:
Based on the table,
= 10.5, = (14 – 8) = 6, = (14 – 12) = 2 and i = 10
We can also obtain the mode by using the histogram;
Chapter 2: Descriptive Statistics
Exampl
e 22
FORMULA
27
QQS1013 Elementary Statistics
2.4.3 Relationship among Mean, Median & Mode
As discussed in previous topic, histogram or a frequency distribution curve
can assume either skewed shape or symmetrical shape.
Knowing the value of mean, median and mode can give us some idea
about the shape of frequency curve.
(1) For a symmetrical histogram and frequency curve with one peak, the
value of the mean, median and mode are identical and they lie at the
center of the distribution.
Mean, median, and mode for a symmetric histogram and frequency distribution curve
(2) For a histogram and a frequency curve skewed to the right, the value of
the mean is the largest that of the mode is the smallest and the value
of the median lies between these two.
Chapter 2: Descriptive Statistics 28
QQS1013 Elementary Statistics
Mean, median, and mode for a histogram and frequency distribution curve skewed to the right
(3) For a histogram and a frequency curve skewed to the left, the value of
the mean is the smallest and that of the mode is the largest and the
value of the median lies between these two.
Mean, median, and mode for a histogram and frequency distribution curve skewed to the left
2.5 DISPERSION MEASUREMENT
The measures of central tendency such as mean, median and mode do not
reveal the whole picture of the distribution of a data set.
Chapter 2: Descriptive Statistics 29
QQS1013 Elementary Statistics
Two data sets with the same mean may have a completely different spreads.
The variation among the values of observations for one data set may be
much larger or smaller than for the other data set.
2.5.1 Ungrouped Data Measurement
Range
RANGE = Largest value – Smallest value
Find the range of production for this data set,
Solution:
Range = Largest value – Smallest value = 267 277 – 49 651 = 217 626
Disadvantages:
o being influenced by outliers.o based on two values only. All other values in a data set are ignored.
Variance and Standard Deviation
Standard deviation is the most used measure of dispersion.
A Standard Deviation value tells how closely the values of a data set
clustered around the mean.
Chapter 2: Descriptive Statistics
Exampl
e 23
FORMULA
30
QQS1013 Elementary Statistics
Lower value of standard deviation indicates that the data set value are
spread over relatively smaller range around the mean.
Larger value of data set indicates that the data set value are spread
over relatively larger around the mean (far from mean).
Standard deviation is obtained the positive root of the variance:
Variance for population:
Variance for sample:
Standard Deviation for population:
Standard Deviation for sample:
Let x denote the total production (in unit) of company
Company ProductionABCDE
6293
1267534
Find the variance and standard deviation,
Solution:
Company Production (x) x2
Chapter 2: Descriptive Statistics
Exampl
e 24
FORMULA
FORMULA
31
QQS1013 Elementary Statistics
ABCDE
6293
1267534
3 8448 649
15 8765 6251 156
1156
Since s2 = 1182.50;
Therefore,
The properties of variance and standard deviation:
o The standard deviation is a measure of variation of all values from the
mean.
o The value of the variance and the standard deviation are never
negative. Also, larger values of variance or standard deviation indicate
greater amounts of variation.
o The value of s can increase dramatically with the inclusion of one or
more outliers.
o The measurement units of variance are always the square of the
measurement units of the original data while the units of standard
deviation are the same as the units of the original data values.
2.5.2 Grouped Data Measurement
Range
Chapter 2: Descriptive Statistics 32
QQS1013 Elementary Statistics
Class Frequency
41 – 5051 – 6061 – 7071 – 8081 – 9091 - 100
1 3 71310 6
Total 40
Upper bound of last class = 100.5Lower bound of first class = 40.5Range = 100.5 – 40.5 = 60
Variance and Standard Deviation
Variance for population:
Variance for sample:
Standard Deviation:
Population:22
Sample:22 ss
Find the variance and standard deviation for the following data:
Chapter 2: Descriptive Statistics
Range = Upper bound of last class – Lower bound of first class
Exampl
e 25
FORMULA
FORMULA
FORMULA
33
QQS1013 Elementary Statistics
No. of order f
10 – 1213 – 1516 – 1819 – 21
4122014
Total n = 50
Solution:
No. of order f x fx fx2
10 – 1213 – 1516 – 1819 – 21
4122014
11141720
44168340280
484235257805600
Total n = 50 857 14216
Variance,
Standard Deviation,
75.25820.72 ss
Thus, the standard deviation of the number of orders received at the office of this mail-order company during the past 50 days is 2.75.
2.5.3 Relative Dispersion Measurement
To compare two or more distribution that has different unit based on their
dispersion OR
Chapter 2: Descriptive Statistics 34
QQS1013 Elementary Statistics
To compare two or more distribution that has same unit but big different in
their value of mean.
Also called modified coefficient or coefficient of variation, CV.
)(%100
)(%100
populationx
CV
samplex
sCV
Given mean and standard deviation of monthly salary for two groups of worker who are working in ABC company- Group 1: 700 & 20 and Group 2 :1070 & 20. Find the CV for every group and determine which group is more dispersed.
Solution:
The monthly salary for group 1 worker is more dispersed compared to group 2.
2.6 MEASURE OF POSITION
Determines the position of a single value in relation to other values in a
sample or a population data set.
Quartiles
Quartiles are three summary measures that divide ranked data set into four equal parts.
Chapter 2: Descriptive Statistics
Exampl
e 26
FORMULA
35
QQS1013 Elementary Statistics
o The 1st quartiles – denoted as Q1
o The 2nd quartiles – median of a data set or Q2
o The 3rd quartiles – denoted as Q3
Table below lists the total revenue for the 11 top tourism company in Malaysia
109.7 79.9 21.2 76.4 80.2 82.1 79.4 89.3 98.0 103.5
86.8
Solution:
Step 1: Arrange the data in increasing order
76.4 79.4 79.9 80.2 82.1 86.8 89.3 98.0 103.5 109.7
121.2
Step 2: Determine the depth for Q1 and Q3
Step 3: Determine the Q1 and Q3
76.4 79.4 79.9 80.2 82.1 86.8 89.3 98.0 103.5 109.7
121.2
Q1 = 79.9 ; Q3 = 103.5
Table below lists the total revenue for the 12 top tourism company in Malaysia
109.7 79.9 74.1 121.2 76.4 80.2 82.1 79.4 89.3
98.0 103.5 86.8
Solution:
Step 1: Arrange the data in increasing order
Chapter 2: Descriptive Statistics
Exampl
e 27
Exampl
e 28
FORMULA
FORMULA
36
QQS1013 Elementary Statistics
74.1 76.4 79.4 79.9 80.2 82.1 86.8 89.3 98.0 103.5 109.7
121.2
Step 2: Determine the depth for Q1 and Q3
Step 3: Determine the Q1 and Q3
74.1 76.4 79.4 79.9 80.2 82.1 86.8 89.3 98.0 103.5 109.7
121.2
Q1 = 79.4 + 0.25 (79.9 – 79.4) = 79.525
Q3 = 98.0 + 0.75 (103.5 – 98.0) = 102.125
Interquartile Range
The difference between the third quartile and the first quartile for a data
set.
IQR = Q3 – Q1
By referring to example 28, calculate the IQR.
Solution:
IQR = Q3 – Q1 = 102.125 – 79.525 = 22.62.6.2 Grouped Data Measurement
Quartiles
From Median, we can get Q1 and Q3 equation as follows:
Chapter 2: Descriptive Statistics
Exampl
e 29
FORMULA
FORMULA
37
QQS1013 Elementary Statistics
Refer to example 22, find Q1 and Q3
Solution:
1st Step: Construct the cumulative frequency distribution
Time to travel to work Frequency Cumulative Frequency
1 – 1011 – 2021 – 3031 – 4041 – 50
81412 9 7
822344350
2nd Step: Determine the Q1 and Q3
Class Q1 is the 2nd class
Therefore,
Chapter 2: Descriptive Statistics
Exampl
e 30
38
QQS1013 Elementary Statistics
Class Q3 is the 4th class
Therefore,
Interquartile Range
IQR = Q3 – Q1
Refer to example 30, calculate the IQR.
Solution:
IQR = Q3 – Q1 = 34.3889 – 13.7143 = 20.6746
2.7 MEASURE OF SKEWNESS
To determine the skewness of data (symmetry, left skewed, right skewed)
Also called Skewness Coefficient or Pearson Coefficient of Skewness
Chapter 2: Descriptive Statistics
Exampl
e 31
FORMULA
FORMULA
39
QQS1013 Elementary Statistics
s
ModeMeanS
ors
ModeMeanS
k
k
)(3
If Sk +ve right skewed
If Sk -ve left skewed
If Sk = 0 symmetry
If Sk takes a value in between (-0.9999, -0.0001) or (0.0001,
0.9999) approximately symmetry.
The duration of cancer patient warded in Hospital Seberang Jaya recorded in a frequency distribution. From the record, the mean is 28 days, median is 25 days and mode is 23 days. Given the standard deviation is 4.2 days.
a. What is the type of distribution?
b. Find the skewness coefficient
Solution:
This distribution is right skewed because the mean is the largest value
So, from the Sk value this distribution is right skewed.
ADDITIONAL INFORMATION
Use of Standard Deviation
1. Chebyshev’s Theorem
Chapter 2: Descriptive Statistics
Exampl
e 32
40
QQS1013 Elementary Statistics
According to Chebyshev’s Theorem, for any number k greater than 1, at least (1 – 1/k2) of the data values lie within k standard deviations of the mean.
2
11
11
2
2
k
Thus; for example if k = 2, then
Therefore, according to Chebyshev’s Theorem, at least 75% of the values of a data set lie within two standard deviation of the mean
2. Empirical Rule
For a bell-shaped distribution, approximately
1.68%of the observations lie within one standard deviation of the mean.
2.95% of the observations lie within two standard deviations of mean.
3.99.7% of the observations lie within three standard deviations of the mean.
Measure of Position
1. Ungrouped Data - Quartile Deviation
QD is a mean for Interquartile Range
Chapter 2: Descriptive Statistics 41
QQS1013 Elementary Statistics
It used to compare the dissemination of two data set.
If the QD value is high, it means that the data is more
disseminated.
Quartile Deviation = Interquartile Range / 2 = (Q3 - Q1) / 2
2. Ungrouped Data – Percentile
Pk = value of the (kn)th term in a ranked set 100
Where: k = the number of percentile n = the sample size
Percentile rank of xi = Number of values than xi X 100 Total number of values in the data set
Chapter 2: Descriptive Statistics 42
QQS1013 Elementary Statistics
EXERCISE 2
1. A survey research company asks 100 people how many times they have been to the dentist in the last five years. Their grouped responses appear below.
Number of Visits Number of Responses0 – 4 165 – 9 25
10 – 14 4815 – 19 11
What are the mean and variance of the data?
2. A researcher asked 25 consumers: “How much would you pay for a television adapter that provides Internet access?” Their grouped responses are as follows:
Amount ($) Number of Responses
0 – 99 2100 – 199 2200 – 249 3250 – 299 3300 – 349 6350 – 399 3400 – 499 4500 – 999 2
Calculate the mean, variance, and standard deviation.
3. The following data give the pairs of shoes sold per day by a particular shoe store in the last 20 days.
85 90 89 70 79 80 83 83 75 7689 86 71 76 77 89 70 65 90 86
Calculate thea. mean and interpret the value.
b. median and interpret the value.
c.mode and interpret the value.
d. standard deviation.
4. The followings data shows the information of serving time (in minutes) for 40 customers in a post office:
2.0 4.5 2.5 2.9 4.2 2.9 3.5 2.83.2 2.9 4.0 3.0 3.8 2.5 2.3 3.52.1 3.1 3.6 4.3 4.7 2.6 4.1 3.14.6 2.8 5.1 2.7 2.6 4.4 3.5 3.02.7 3.9 2.9 2.9 2.5 3.7 3.3 2.4
Chapter 2: Descriptive Statistics 43
QQS1013 Elementary Statistics
a.Construct a frequency distribution table with 0.5 of class width.
b.Construct a histogram.
c.Calculate the mode and median of the data.
d.Find the mean of serving time.
e.Determine the skewness of the data.
f. Find the first and third quartile value of the data.
g.Determine the value of interquartile range.
5. In a survey for a class of final semester student, a group of data was obtained for the number of text books owned.
Number of students Number of text book owned
129
1115108
553210
Find the average number of text book for the class. Use the weighted mean.
6.The following data represent the ages of 15 people buying lift tickets at a ski area.
15 25 26 17 38 16 60 2130 53 28 40 20 35 31
Calculate the quartile and interquartile range.
7.A student scores 60 on a mathematics test that has a mean of 54 and a standard deviation of 3, and she scores 80 on a history test with a mean of 75 and a standard deviation of 2. On which test did she perform better?
8.The following table gives the distribution of the share’s price for ABC Company which was listed in BSKL in 2005.
Price (RM) Frequency12 – 1415 – 1718 – 2021 – 2324 – 2627 - 29
51425763
Find the mean, median and mode for this data.ANSWER EXERCISE 1
Chapter 2: Descriptive Statistics 44
QQS1013 Elementary Statistics
1. a) Frequency distribution table, relative frequencies, percentages and angle sizes of all categories.
Method of payment
Frequency, f Relative frequency
Percentage (%) Angle Size (o)
CashCheckCredit CardDebitOther
45421
0.25000.31250.25000.12500.0625
25 31.25
25 12.50 6.25
90112.5
9045
22.5Total 16 1.0 100 360
b). Pie Chart
25%
31%
25%
13%
6%
Cash
Check
Credit Card
Debit
Other
2. a). Frequency distribution table, relative frequencies, percentages and angle sizes of all categories.
Type of product Frequency
Relative Frequency
Percentage (%)
Angle Size (o)
A 13 0.26 26 93.6B 12 0.24 24 86.4C 5 0.1 10 36D 9 0.18 18 64.8E 11 0.22 22 79.2Total 50 1 100 360
b). Pie Chart
A, 13
B, 12C, 5
D, 9
E, 11
A
B
C
D
E
3. Time series graph
Chapter 2: Descriptive Statistics 45
QQS1013 Elementary Statistics
0
200
400
600
800
1000
1200
1 2 3 4 5 6 7
Time
No.
of F
atal
ities
4. a). Frequency Distribution TableSource of news Frequency, fNewspaper 8Television 5Radio 7Magazine 5Total 25
b). Bar Graph
0
1
2
3
4
5
6
7
8
9
Newspaper Television Radio Magazine
Source of news
Fre
quen
cy
5. Component bar graph
0
10
20
30
40
50
60
70
September October November December
Month
Fre
quen
cy
Import
Export
6. Bar Graph
Chapter 2: Descriptive Statistics 46
QQS1013 Elementary Statistics
Quantity (mm)
0
200400
600800
10001200
1400
Quantity (mm)
The highest quantity of rain fall is coming from Terengganu state, second goes to Pahang and followed by Kuala Lumpur. The lowest rain fall is Pulau Pinang state. The rain fall is not equally distributed.
ANSWER EXERCISE 2
1. Class f x fx fx^20 - 4 16 2 32 645 - 9 25 7 175 122510 -14 48 12 576 691215 - 19 11 17 187 3179
100 970 11380
2.Class f x fx fx^20-99 2 49.5 99 4900.5100-199 2 149.5 299 44700.5200-249 3 224.5 673.5 151200.75250-299 3 274.5 823.5 226050.75300-349 6 324.5 1947 631801.5350-399 3 374.5 1123.5 420750.75400-499 4 449.5 1798 808201500-999 2 749.5 1499 1123500.5
25 8262.53411106.2
5
Chapter 2: Descriptive Statistics
Mean =970/100 = 9.7
Standard Deviation = 4.46196
Variance = 19.90909
Mean = 330.5
Standard Deviation = 168.368396
Variance = 28347.9167
47
QQS1013 Elementary Statistics
3.65 422570 490070 4900
71 504175 562576 577676 577677 592979 624180 640083 688983 688985 722586 739686 739689 792189 792189 792190 810090 8100
1609 130571
4. Sturge's FormulaNumber of classes,c = 1 + 3.3 log 40 = 6.2868 = 6
Class Width,I > (5.1 - 2)/6 = 0.5167 = 0.6
Starting Point = 2.0
Frequency Distribution TableClass f CF x fx fx^22.0 - 2.5 7 7 2.2 15.4 33.882.6 - 3.1 15 22 2.7 40.5 109.353.2 - 3.7 7 29 3.2 22.4 71.683.8 - 4.3 6 35 3.7 22.2 82.144.4 - 4.9 4 39 4.2 16.8 70.565.0 - 5.5 1 40 4.7 4.7 22.09
40 122 389.7
class mode = second classmode = 2.85
Chapter 2: Descriptive Statistics
position of median = 10.5
median = (80+83)/2 = 81.5
Mean = 80.45
Mode = 89
Variance = 59.31316
s = 7.701504
48
QQS1013 Elementary Statistics
class median = 40/2 = 20 = second classMedian = 3.07Mean = 3.05
Skewness = mode - median - mean = Right Skew
40/4 = 10Q1 = 2.67
Q3 = 3.85
IQR = 1.18
5. x w xw
12 5 609 5 45
11 3 3315 2 3010 1 10
8 0 016 178
6. 151617202125262830313538405360
7. CV (Mathematics) = 3/54 * 100% = 5.5556
CV (History) = 2/75 * 100% = 2.6667
Since the coefficient of variation for History is less than Mathematics so, the student performs better for History.
Chapter 2: Descriptive Statistics
Mean = 11.125
Position of Q1 = 4Q1 = 20
Position of Q3 = 12Q3 = 38
IQR = 18
49
QQS1013 Elementary Statistics
Chapter 2: Descriptive Statistics 50