nova família de testadores para certificação de cabos versiv™ by fluke networks
DESCRIPTION
Desenvolvido para ajudar os instaladores de comunicação de dados a atingir a aceitação do sistema para trabalhos com cobre e fibra de maneira mais rápida, precisa e rentável, Versiv é uma plataforma poderosa que oferece módulos intercambiáveis para cobre, fibra e teste de OTDR, assim como inovações de software que aceleram o tempo do teste e sua precisão, além de simplificar a configuração, o planejamento e a emissão de relatórios de teste.TRANSCRIPT
![Page 1: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/1.jpg)
![Page 2: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/2.jpg)
Certification of Structured Cabling
Jim Davis
Regional Sales Director
Fluke Networks
![Page 3: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/3.jpg)
• Intro to Fluke Networks
• Why Certification
• Versiv !
- Copper
- Fiber
- ProjX
AGENDA
![Page 4: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/4.jpg)
WHO IS DANAHER?
$18B Science & Technology Company
![Page 5: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/5.jpg)
WHERE SITS FLUKE NETWORKS?
Focused on network test & analysis and service assurance & protection
Four segment leaders with great brands, innovative products and strong customers
Market: ~$5B @ ~8%
Communication
Test Platform
Operating
Company
Leader in local area network analysis & media testing
Served Market Size: ~$1.5B & Market Growth: ~5%
Sales: ~$325M We know networks.
Danaher named #1 by 2011 Test & Measurement World Magazine
Market Size: $12B & Growth: 5-7%
Sales: $3.4B
Test &
Measurement
Group
Strong Peers in the #1 T&M Company in the World
![Page 6: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/6.jpg)
FLUKE NETWORKS
Private Network Owners… Network & IT Managers Network and application performance monitoring
Offering more ways to look at your networks than anyone else Providing unique views into your networks you can’t get anywhere else Delivering the right tools to every level of your network support organization
Data Communications Installers Copper and fiber premise cable certification and diagnostic instruments
Communication Service Providers Telco line technician tools and DSL line test instruments
Private Network Owners… Network Techs & Engrs Portable network analysis and tools for all local network mediums
Outfitting Network Pros & Heroes At Every
![Page 7: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/7.jpg)
Why Certify? Be sure that the installed cabling meets the performance you
are paying for.
Cat 6a jack + Cat 6a cable + Cat 6a installer ≠ Cat 6a
To get paid for the job
Experience has shown that Certified networks run faster
CRC/FCS errors lead to re-transmissions
Less expensive components can be considered – if they meet your performance requirements
Beware of those who offer to save $ on the installation by not certifying
![Page 8: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/8.jpg)
The Simple reasons to certify…
![Page 9: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/9.jpg)
CHEAP CAT 5 OR EXPENSIVE CAT 3?
![Page 10: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/10.jpg)
Use the least expensive cable that meets your needs
![Page 11: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/11.jpg)
Cable, Connector or Installer?
![Page 12: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/12.jpg)
HOW TO READ TEST RESULTS
![Page 13: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/13.jpg)
HOW TO READ TEST RESULTS
![Page 14: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/14.jpg)
Now that we know why to Certify, let’s
look at How
![Page 15: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/15.jpg)
VERSIV THE INFRASTRUCTURE TESTING PLATFORM THAT DOES IT ALL
![Page 16: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/16.jpg)
• DSX = Versiv main & remote + DSX modules - PLA’s, CHA’s
WHAT IS DSX
Copper Certification
DSX-5000
![Page 17: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/17.jpg)
• DSX-5000 = Copper • CFP = OLTS • OFP = OTDR • Q = Quad OLTS • O = quad OTDR • M = multimode OLTS • S = singlemode OLTS • i = Inspection
• Add = Add-on Kit • R = Remote • NTB = Network Test Bundle
WHAT’S IT ALL MEAN
![Page 18: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/18.jpg)
• DTX-1800 customers now buy DSX-5000
DTX-1800 → DSX-5000
Copper Certification
DSX-5000
![Page 19: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/19.jpg)
DSX-5000
![Page 20: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/20.jpg)
• DTX-1800MS customers now buy DSX-5000 Qi
DTX-1800MS → DSX-5000 QI
![Page 21: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/21.jpg)
DSX-5000 QI
![Page 22: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/22.jpg)
• DTX-1800MSO now buy DSX-5000 QOi
DTX-1800MSO → DSX-5000 QOI
![Page 23: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/23.jpg)
DSX-5000 QOI
![Page 24: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/24.jpg)
CAT. 6A TEST: COMPARING DTX & DSX
DONE
![Page 25: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/25.jpg)
LEVEL V ACCURACY
![Page 26: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/26.jpg)
CLASS FA 1 GHZ - LEVEL V ACCURACY
• To those customer that want top performance, Class FA manufacturers want to demonstrate performance of their systems up to 1GHz. The DSX-5000 adequately meets the proposed for Level V tester requirements. Worst case uncertainty at 1GHz is proposed to be within 1dB comparable with Level-IV at 600MHz.
• Fluke Networks is the 1st Field Testing Company to have: - A FULL and COMPLETE accuracy specification introduced with IEC to
support field testing to Class FA, 1 GHz
- Level V is the new accuracy designation …
- It’s much more than just frequency …
IEC-61935-1 Ed.3 :
![Page 27: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/27.jpg)
BUILT IN ALIEN CROSSTALK: COPPER
• No additional modules needed
- The DSX CableAnalyzer is the FIRST FIELD TESTER to have built in Alien Crosstalk testing
![Page 28: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/28.jpg)
PS ANEXT
• Power Sum Alien Near End Crosstalk
![Page 29: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/29.jpg)
READY FOR TODAY’S AND TOMORROW’S
REQUIREMENTS
Shield integrity • Now it’s just shield continuity is a DC
measurement.
• The DSX-5000 reports distance to shield
integrity issues using a patented AC
measurement technique.
• Finds shield faults in the datacenter – even
with common ground.
Resistance Unbalance:
• Important for successful PoE
operation.
• Specified in IEEE 802.3af and
802.3at.
• Specified in ANSI/TIA-568-C.2.
• Specified in ISO/IEC 11801:2010.
Balance measurements:
• Important for successful 10GBASE-T.
• Specified in ANSI/TIA-568-C.2 & TSBs.
• Specified in ISO/IEC 11801:2010
All the measurements are currently not specified as a field measurement
because it was thought it could never be done in the field. The DSX-5000
CableAnalyzer is the FIRST FIELD TESTER to measure them!
![Page 30: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/30.jpg)
• New advanced diagnostics, reduces the
time required to fix cabling faults.
• HDTDR Return Loss Error Diagnostics.
• HDTDX NEXT Error Diagnostics to “see”
where Crosstalk is happening.
• Uploads to LinkWare for remote help.
POWERFUL COPPER DIAGNOSTICS
Powerful Troubleshooting capabilities are important! No matter how thoroughly the
installation work is being executed, fails do occur. Locating faults can take up a lot time and
jeopardize profit margins.
Far end connection is clearly the issue
![Page 31: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/31.jpg)
• Fa (600 MHz) and Fa (1 GHz)
CLASS FA TEST LIMITS
IEC 61935-1 has not approved testing to 1 GHz (Level V Accuracy) at this time Fluke Networks proposal for Level V accuracy was accepted, so we are giving the customer the option of working to a ratified (600 MHz) or a draft (1 GHz) standard.
![Page 32: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/32.jpg)
• The far end is terminated with an RJ45 plug
IP CAMERAS AND ACCESS POINTS
No warning of different adapters, unlike DTX CableAnalyzer
![Page 33: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/33.jpg)
• Adopting ISO/IEC naming
NEW CABLE TYPES
![Page 34: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/34.jpg)
• Adopting ISO/IEC (US) naming
NEW CABLE TYPES
![Page 35: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/35.jpg)
• Adopting ISO/IEC (US) naming
NEW CABLE TYPES
U/UTP - Individual pairs are unshielded - No overall shield
U/FTP - Individual pairs are shielded - No overall shield
S/FTP - Individual pairs are shielded - Overall shield
![Page 36: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/36.jpg)
• ALL wire mappers would think the shield was connected
• Grounding of two racks makes this happen
• DSX can not only tell you the shield is open
• It can also locate the distance to the shield issue
SHIELD INTEGRITY
![Page 37: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/37.jpg)
• Shield is open at one end due to incorrect termination
SHIELD INTEGRITY
![Page 38: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/38.jpg)
• Even when the two connectors are grounded together
SHIELD INTEGRITY
![Page 39: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/39.jpg)
• Other Wire Maps testers will show this connected
SHIELD INTEGRITY
![Page 40: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/40.jpg)
• An incorrectly terminated shield can adversely affect transmission properties such as Alien Crosstalk
SHIELD INTEGRITY
The data below was taken from a data center where the shield was terminated incorrectly
The Wire Map passed
![Page 41: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/41.jpg)
• Works as long as the resistance unbalance is within xx Ω
ADDITIONAL TESTS FOR POE
![Page 42: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/42.jpg)
• Difference in Resistance between the pair
RESISTANCE UNBALANCE
1.87 Ω
1.85 Ω
Resistance = 3.7 Ω Resistance Unbalance = 0.02 Ω
![Page 43: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/43.jpg)
• Thought it could not be done in the field
• DSX-5000 CableAnalyzer can do it
RESISTANCE UNBALANCE
We’ve had customers complain their PoE would not work, yet it passed the TIA and ISO tests
![Page 44: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/44.jpg)
• Aluminum has a higher resistance than Cu, and is less expensive
• It can be used in CCA cables but these cables are do not meet TIA standards which require pure copper conductors
• Customers don’t want this cable as it is a fire hazard and may not support PoE
Resistive Unbalance - Use test to identify CCA
![Page 45: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/45.jpg)
• Look for (PoE) at the bottom of the TIA and ISO folders
HOW DO I GET RESISTANCE UNBALANCE?
![Page 46: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/46.jpg)
• New folder Balance Measurements
TEST LIMITS
![Page 47: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/47.jpg)
• Transverse Conversion Loss is the ratio (in dB) of a common-mode voltage measured on a wire pair relative to a differential-mode voltage applied to the same end of the pair. The TCL value shows you how well the impedances of the pair’s conductors are balanced.
TCL (TRANSVERSE CONVERSION LOSS)
Differential Signal Applied
Common Mode Voltage Measured
![Page 48: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/48.jpg)
• A high TCL value means that the impedances of the conductors relative to ground are almost equal.
TCL (TRANSVERSE CONVERSION LOSS)
High TCL values correspond to better noise immunity and lower emissions.
![Page 49: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/49.jpg)
• Transverse Conversion Transfer Loss is the ratio (in dB) of a common-mode voltage measured at the far end of a wire pair relative to a differential-mode voltage applied to the near end of the same pair.
• Since TCTL values improve with longer links, we actually use Equal Level Transverse Conversion Loss (ELTCTL)
TCTL (TRANSVERSE CONVERSION TRANSFER LOSS)
Differential Signal Applied
Common Mode Voltage Measured
![Page 50: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/50.jpg)
• Subtracting the effects of insertion loss normalizes the results for length and produces ELTCTL values, which are not dependent on length.
ELTCTL (EQUAL LEVEL TRANSVERSE CONVERSION TRANSFER LOSS)
Because ELTCTL does not depend on length, it is used instead of TCTL to evaluate cable performance. High ELTCTL values correspond to better noise immunity and lower emissions.
![Page 51: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/51.jpg)
• Common-Mode Return Loss is the difference (in dB) between the power of a common-mode signal applied to a wire pair and the power of the common-mode signal reflected back. The signal reflections are caused by variations in the cable’s impedance.
CMRL (COMMON MODE RETURN LOSS
Common Mode Signal Applied
Common Mode Voltage Measured
![Page 52: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/52.jpg)
• CDNEXT is the difference in amplitude (in dB) between a common-mode voltage applied to a pair and the differential mode voltage measured on other pairs at the same end of the cabling.
CDNEXT (COMMON MODE TO DIFFERENTIAL MODE NEAR-END CROSSTALK)
Differential Signal Measured
Common Mode Voltage Applied
![Page 53: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/53.jpg)
• No test standards require CDNEXT measurements. The (+All) Autotest includes the CDNEXT test for troubleshooting purposes only.
CDNEXT (COMMON MODE TO DIFFERENTIAL MODE NEAR-END CROSSTALK)
Higher CDNEXT values correspond to larger differences between the amplitudes of the common-mode and differential mode voltages, which means better cabling performance.
![Page 54: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/54.jpg)
FIBER TESTING
![Page 55: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/55.jpg)
• OFP-QUAD has 3 ICAs ! • What is the reason for
light sources with ICA’s - To match the LC connector
on the patch panel ? - NO the SC is a much more
robust connector - Ease of cleaning !
• To support the one jumper method it is essential to …. 1. … have an ICA on the
meter 2. … have a meter with
non critical connector non-PC with a large photo detector
CERTIFIBER PRO QUAD INTER CHANGEABLE
ADAPTERS
![Page 56: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/56.jpg)
• Optional fiber camera to inspect end face of fiber connectors
INSPECT THE TEST GEAR
![Page 57: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/57.jpg)
• Now the units have warmed up sufficiently
• Press SET REF
• RUN WIZARD will walk you through the process 1. Connect TRC with mandrel (VLM)
2. Press SET REFERENCE
3. Disconnect from Meter and insert second TRC in both paths
4. VERSIV will check whether the TRC are good enough for the job
5. If yes … you are ready to test
6. Let’s connect to the artifact We connect to the good links Main Meter (2) (6) Remote Source Main Source (3) --- (7) Remote Meter
SETTING THE REFERENCE
![Page 58: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/58.jpg)
RUNNING A TEST
• Change back to Main Meter (2) (6) Remote Source Main Source (3) (7) Remote Meter
• We run 3 tests …. “Manual SAVE” !!!
![Page 59: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/59.jpg)
• Encircled Flux (EF) is the final piece in the puzzle to reducing measurement uncertainty in the field
REDUCING MULTIMODE UNCERTAINTY
![Page 60: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/60.jpg)
• Wrong way!
• Issues - You have no idea what the loss is in the adapter
- Whatever it is, it’s subtracted from your measurement
- The uncertainty is horrendous – negative loss
WRONG WAY TO SET REFERENCE
? dB
![Page 61: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/61.jpg)
• For testing an installed fiber optical link, should always use the 1 Jumper Reference Method
• Does require the test equipment to have interchangeable adapters on the INPUT ports
RIGHT WAY TO SET REFERENCE
![Page 62: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/62.jpg)
• Applications:
- Mostly Telecom
- FTTx
- CCTV
- Remote Sensors
• SimpliFiber PRO was better suited for the job then DTX or DSP
• CertiFiber works like/with SimpliFiber PRO
• Competition LT offers bi-directional testing on a single fiber - This is common for deticated Telecom tester but comes at price !
- …. The lack of a non-critical port on the meter side means no support of 1 JumperMethode. EVER !
SINGLE FIBER TESTING
![Page 63: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/63.jpg)
1. Select Power Meter /Light Source Mode
2. Select the remote source
3. Set Reference
4. Connect to Link
5. Wait for result
6. Save Result
SINGLE FIBER TESTING …
REMOTE SIMPLIFIBER PRO LIGHT SOURCE
![Page 64: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/64.jpg)
1. Press on remote CertiFiber PRO the button one and then hold until MM led begins to blinkg Red/Green
2. Select Test Mode “Auto CertifFiber PRO”
3. Perform REF procedure and test identical to procedure for SimpliFiber PRO
PRESS BUTTON
![Page 65: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/65.jpg)
• Quick checking of cords
• Test can be invoked by pressing and holding the button next to VFL for 5 seconds
• Real Time Reading helps to identify cracked cords etc.
OTHER POWER / METER LIGHT SOURCE
MODE
![Page 66: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/66.jpg)
Something New
ProjX Project Management
Get to System Acceptance
(and Payment) faster!
![Page 67: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/67.jpg)
Planning Setup Test Troubleshoot Report Systems
Acceptance
A NEW PARADIGM FOR INFRASTRUCTURE CERTIFICATION
Multiple jobs, teams, testers, and requirements – a single error can erode your project’s profitability
Waiting for the project manager or “expert” to set things up and deliver the tester is all too common.
Testing can always be faster: now it is
Multiple skill levels of technicians means that projects are delayed while troubleshooting.
Working in an environment with multiple testers, standards, and test regimes makes generating reports
time consuming ,delaying system acceptance.
Customers struggle to understand multiple complex reports which delays systems acceptance.
![Page 68: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/68.jpg)
VERSIV WAS DESIGNED TO WORK DIFFERENTLY
THAN LEGACY TESTERS
Project
A
Installation
Floor 1
Installation
Floor 2
Testing
Floor 1
Testing
Floor 2
Trouble
Shoot
Floor 1& 2
Project
B Installation Testing
Trouble
Shoot
Project
C Installation
Testing
Floor 1
Trouble
Shoot
Roaming testers: contractors manage multiple projects, testers and tasks Concurrent testing: contractors need to simultaneously perform fiber & copper testing and troubleshooting with multiple testers on multiple jobs Project Configuration: contractors need to be able to eliminate wasted time and avoid costly errors due to redundant and time consuming loading of configurations, test limits and cable identifiers
![Page 69: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/69.jpg)
• Easy to set up, minimize test limit errors/better manage multiple projects.
• Create new project for different jobs, locations or customers.
• Easily define project requirements ahead of time.
• Store jobs in LinkWare for each transfer to other Versiv testers.
PROJX MANAGEMENT SYSTEM
![Page 70: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/70.jpg)
• Limitations of legacy cable testers
• ProjX to the rescue
• Examples
- So you have a failing link….
- Two testers, 1 job, no problem!
- Help – need to go back to an old job…..
PROJX
Planning Setup Test Troubleshoot Report Systems
Acceptance
![Page 71: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/71.jpg)
• No way to store project setup if you don’t finish the job
• Easy to lose track of cable ids
- Failing links
- Different cable ids for different project areas
• No punch list for failing links
• LinkWare dependence
- Not able to move files or project setup in the field
LIMITATIONS OF LEGACY CABLE TESTERS
![Page 72: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/72.jpg)
• Allows project setup to be stored, shared and easily recalled
• Creates punch lists for failing links
- No longer lose failing link information
• Keeps track of multiple cable ids
- Allows users to jump around in cable id list
- Doesn’t lose order when a link fails
- Easily move to different projects with unique cable ids
• No LinkWare dependence
- Able to move files or project setup in the field
PROJX TO THE RESCUE
![Page 73: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/73.jpg)
• Powerful IN FIELD project & results management
- Transfer
- Manage
- Move
PROJX TO THE RESCUE
![Page 74: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/74.jpg)
IN FIELD PROJECT & RESULTS
MANAGEMENT
• Transfer - Copy and transfer projects & results
- Projects include project info and test setup
![Page 75: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/75.jpg)
IN FIELD PROJECT & RESULTS
MANAGEMENT
• Transfer - Copy and transfer projects & results
- Projects include project info and test setup
![Page 76: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/76.jpg)
SO YOU HAVE A FAILING LINK….
• Run Test
- Pass or Fail Result
?
![Page 77: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/77.jpg)
SO YOU HAVE A FAILING LINK….
• Run Test
- Pass or Fail
• Failing link options
- Repair and Test Again
- Save and Fix Later
Result
?
![Page 78: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/78.jpg)
SO YOU HAVE A FAILING LINK….
• Run Test
- Pass or Fail
• Failing link options
- Repair and Test Again
- Save and Fix Later
• Punch list
- Created by Fix Later
Result
?
“Punch Lists”
![Page 79: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/79.jpg)
JOB COMPLETE PERCENTAGE
• Percentage of job complete
- Includes all links: pass and fail
Hardrock 0 0
0 %
F1-001 ... F1-100 .
![Page 80: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/80.jpg)
JOB COMPLETE PERCENTAGE
• Percentage of job complete
- Includes all links: pass and fail
Hardrock 47 3
50 %
F1-001 ... F1-100 .
Hardrock 0 0
0 %
F1-001 ... F1-100 .
![Page 81: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/81.jpg)
JOB COMPLETE PERCENTAGE
• Percentage of job complete
- Includes all links: pass and fail
• Don’t lose cable ids when link fails
Hardrock 47 3
50 %
F1-001 ... F1-100 .
Hardrock 0 0
0 %
F1-001 ... F1-100 .
Hardrock 95 5
100 %
F1-001 ... F1-100 .
![Page 82: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/82.jpg)
JOB COMPLETE PERCENTAGE
• Percentage of job complete
- Includes all links: pass and fail
• Don’t lose cable ids when link fails
• Allows you to move punch list to different tester or team!
Hardrock 47 3
50 %
F1-001 ... F1-100 .
Hardrock 0 0
0 %
F1-001 ... F1-100 .
Hardrock 95 5
100 %
F1-001 ... F1-100 .
Hardrock 100 0
100 %
F1-001 ... F1-100 .
![Page 83: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/83.jpg)
PROJX – GET THE JOB DONE RIGHT THE
1ST TIME
• Makes managing complex jobs easy
• Multiple ways to perform tasks
• Quickly see how much of the job has been completed - No more going back and testing links that were
tested to the wrong limits!
• Makes it easy to combine results of different teams with - Transfer, Copy and Manage
• Easily move from one job to another
![Page 84: Nova família de Testadores para Certificação de Cabos Versiv™ by Fluke Networks](https://reader038.vdocuments.net/reader038/viewer/2022103116/5588c04bd8b42a552c8b464a/html5/thumbnails/84.jpg)
• Interface – it just works!
• 10 second Cat 6A Autotest
• Shield integrity
• Resistance Unbalance
• TCL and ELTCTL measurements
• New HDTDX, works to 1 GHz
• Full Class FA support
• Diagnostic mode in Tools
• Built in Alien Crosstalk
• LinkWare
ADRIAN’S COOL LIST