NOVOTEST is manufacturer of devices and systems for non-destructive testing.Today we design and produce instruments for measuring a wide range of

parameters and quality testing of the majority of products: hardness testers, ultrasonic flaw detectors and thickness gauges, coating testing instruments, devices for quality testing of construction materials, magnetometers, gauges for environmental control and many others.

HARDNESS TESTING • Portable Hardness Testers • Bench Hardness Testers • Hardness Test Blocks • Shore Hardness Testers

ULTRASONIC TESTING

• Ultrasonic Flaw Detectors • Transducers (UT-Probes)• Ultrasonic Thickness Gauges• Calibration and Reference Blocks

ULTRASONIC TESTING

• Ultrasonic Flaw Detectors • Transducers (UT-Probes)• Ultrasonic Thickness Gauges • Calibration and Reference Blocks

COATING TESTING• Adhesion Testing Instruments• Viscosity Meters• Devices for testing of Coatings on Metals• Instruments for Strength Testing• Enviroment Testing Devices

CONSTRUCTIONMATERIALS TESTING• Rebar Detector• Concrete Test Devices

MAGNETIC TESTING• Steel Structure Analyzer • Gaussmeter • Instruments for MPI and PT

– p. 4-13

– p. 14-21– p. 14-21

– p. 36-37

– p. 38-39

– p. 22-35

● More than 10 years on NDT market;

● Leading manufacturer of NDT devices in Ukraine;

● Representative offices in more than 30 countries around the world;

● Powerful development centre;

● Constant expansion of the product range;

● Manufacturing customized NDT systems;

● Solutions for non-standard NDT tasks;

● After-sales service and technical support;

● Individual approach for cooperation with dealers.

2 3

Unique device – the world’s irsthardness tester with photo-ixing ofmeasurements which allows to bindthe values of hardness to testedobjects with indication of a speciicplaceontheproduct!Hardness tester works as with

the UCI so with the dynamic (Leeb)probes.Usercangettheadvantagesofthetwomethodsofmeasurement–theseare themaximumpossibilities,whichcanbeobtainedfromaportabledevice.The device comes preconigured

formeasuringthehardnessofawiderange of materials – steel, alloyedsteels, stainless steels, non-ferrousmetals (aluminum, bronze, brass,copper,iron).

Several modes of displaying information areimplemented in thehardness tester, thesemodessubstantially increase the usability of the deviceanddesigned formaximum reliablemeasurementofhardness:

HardnessTesterNOVOTESTT-UD3canbeequippedwithawirelessprinterforexpress-printingofthemeasurementprotocol.

HardnesstestersNOVOTEST

aresuppliedinshockproofprotectivecases.

Standardsetincludesallnecessaryitemsforoperationwithhardnesstester.

ThedevicecomeswithspecialsoftwaretoworkonthePCwiththearchiveofmeasurements.

Sealed housing with rubber pro-tecting shockproof liningsmakes thedevice perfectly suitable for work intheworkshopandieldconditionswithhighhumidity,dust,etc.

Thehardnesstesterhasafrost-re-sistantdisplaythatallowsusertousethedeviceat any timeof the year inanyclimaticzoneoftheEarth.

HARDNESSTesting

Graph–themodeofbuildingthegraph;Histogram–themodeofbuildingthehistogram;Statistic–themodeofstatistics;Smart–themodeofilteringincorrectmeasurements;Signal–themodeofdisplayingthesignal(onlyforLeebprobe).

Leeb Probe ASTM A956 UCI Probe ASTM A1038

#1THE

FIRSTin the

WORLD!

BUILT-INCAMERA

Combined Hardness Tester NOVOTEST T-UD3

The built-in camera allows making photographsof the testing objectwith subsequent imposition ofthemeasuredvaluesofhardnessonitinarealtime.It implementsthemostreliableandclearmethodofloggingofmeasurements.

4 54 5

Dynamic Leeb probe is used formeasuringthehardnessofsteels,non-ferrousmetals,castiron, materials with coarse-grained structure,solidproducts.

UCI Hardness Tester NOVOTEST T-U3

Ultrasoniccontact-impedance(UCI)probeisusedformeasurementofhardnessofsmallproducts,objectswithathinwall,complexshapeswiththicknessfrom1mmandweightover0,1kg,formeasuringthehardnessofhardenedlayer’ssurface.

Theusingofdiamondindenterallowssetting the probe precisely in any tinypoint. The depth of the imprint left byHardness tester T-U3 is many timessmaller than imprint left by standardRockwell hardness tester, which makesthis method of measuring the leastdestructive.

ThereareavailableUCIprobeswithdiferentloads:10N,50N,98Nforhardnesstestingofdiferentsurfaceinishproducts.

Hardness tester NOVOTEST T-D3 usesdynamic method of hardness measurement– Leeb method, standardized according toASTM A956.

The method allows fast measurement ofhardness: it is necessary to set theprobeonthe surface of the testing object, press thereleasebutton,readthehardnessvalueofthedevice’sdisplay.

Themethodallowsmeasurementofhardnessof coarse materials (stainless steel, cast iron,etc.),productswithill-preparedsurface,massiveproducts–thismethodisperfectlycomplementstheultrasonicmethodformeasuringhardness.

UCI Hardness Tester NOVOTESTT-U3usesultrasoniccontact-impedancemethod of measuring hardnessstandardizedaccordingtoASTM A1038.

The method allows makingmeasurementsveryfastandeasy:installtheprobe,loadthespringforindentationtheindenterwithnecessaryload,readthehardnessvalueonthedevice’sdisplay.

Standard set of Hardness testerincludesDtypeLeebprobe,butitalsocanbeequippedwithDC,DL,D+15,C,G,Etypeprobes.

HARDNESSTesting

These advantages make Hardness tester T-U3perfectly suitable for solving the following tasks: hardnessmeasurements of products with complicated shape, ine-grained materials, heat-treated materials, thin layers andcoatings, parts with surface hardening, thin-walled pipes,thesmalldetails,etc.

NOVOTEST T-D3 makes automaticcalculationofhardnessforawiderangeofmaterials-steel,stainlesssteels,castiron,bronze,aluminum,whichallowscallingthishardnesstesteroneofthemostuniversal.

Leeb Hardness Tester NOVOTEST T-D3

6 7

Combined hardness tester ofmetalsNOVOTESTT-UD2is a multipurpose device of rapidnon-destructivetesting.

Hardness tester NOVOTESTT-UD2isidealforsolvingthefollowingtasks:• Testingofhardnessofferrous andnon-ferrousmetals;• Testingofhardnessofcastiron andvariousalloys;• Determiningthetensilestrength ofcarbonsteelproductsfrom pearliteclass.

Hardness tester NOVOTEST T-U2 usesultrasonic contact-impedance method ofmeasuringhardnessstandardizedaccordingtoASTM A1038.

UCIprobeisusedformeasuringthehardnessof small products, objects with a thin wall,complex shape, to measure the hardness ofsurfacehardenedlayers.

Shore Durometer NOVOTEST standardizedaccording to ISO-7619 and ISO-868, DIN53505,ASTM D2240andJIS K7215.

UCI Hardness Tester

NOVOTEST T-U2

UCI Probe Test Stand

NOVOTEST

It istheaccessoryunitforportableNOVOTEST hardness testers (T-U2,T-U3,T-UD2,T-UD3),whichisspeciallydesignedforUCIprobe.

Hardness test blocks Rockwell (HRA,HRB,HRC),Brinell (HB),Vickers (HV)andLeeb(HLD,HLG)aredesignedforcheckingmeasurement accuracy and calibrationof bench or portable hardness testers ofmetals.

Hardness Test Blocks

NOVOTEST

HARDNESSTesting

Leeb Hardness Tester

NOVOTEST T-D2

Shore Hardness Test Blocks NOVOTEST

Dynamic Leebprobe is used formeasuringthe hardness of non-ferrousmetals, cast iron,materials with coarse-grained structure, solidproducts.

Hardness tester NOVOTEST T-D2 usesdynamic method of hardness measurement– Leeb method, standardized according toASTM A956.

Leeb Probe

ASTM A956

UCI Probe

ASTM A1038

Combined Hardness Tester

NOVOTEST T-UD2SHOCK-PROOF

COVER

PRICE-SPECIFICATION

RATIO

Shore Durometer

NOVOTEST TS-A (analog)

TypicaltestingobjectsofShoreDurometerare:softplastic,printedcircuitboards,glass,elastomers,ibers,softrubber,leather,resin,wax,butyl,silicone,vinyl.

ShoreAandShoreDblocksaccording toISO 7619-1-2009andISO 868-85

UCIProbeTestStandNOVOTESTisusedforixationofsmall,thinproducts(evenless1mm)during tests. It makes testing more accurateandmoreconvenientforusers.

Shore Durometer

NOVOTEST TS-C (digital)

FIRST BEST

8 9

RockwellHardnessTesterNOVOTESTTB-RisdesignedinaccordancetoISO 6508-2,ASTM E18forhardnesstestingofproductsmadeofvariouskindsofsteels,suchascastiron,temperedcastiron,allsortsofalloysandotherkindsofmetals.AlsoitisusedformanufacturingofRockwellcalibrationtestblocksforportablehardnesstesters.

DigitalBrinellHardnessTesterNOVOTESTTB-B-CBrinellhardnesstesterisreliableandeasyinoperation,isusedforhardnesstestingofbiggrainmetalproducts(castedparts,non-ferrousmetalsandalloys), various temperedandhardened steels, samples fromsoftmetals (pure aluminum,lead,tin)andothers,accordingtoISO 6506-2,ASTM E10.

Digital Brinell Hardness Tester

NOVOTEST TB-B-C

HARDNESSTesting

Analog Rockwell Hardness Tester

NOVOTEST TB-R

NOVOTEST TB-R implements direct Rockwellmethodofhardnesstesting,which isbasedonthetestingofsamplesforresistancetopenetrationofin-denterwithcertainload–themostcommonlyusedhardnesstestmethod.

The hardness tester is equipped with large andsmalllat tables,andV-shapeanvilwhichareusedfortestingofobjectswithdiferentshapes.

NOVOTEST TB-R is reliablemachine, and alsoveryeasyinoperationandservicing.Itworkswithoutpowersupply.

Features:

• Operationwithoutmicroscope;• Simpleandreliabletester,veryeasyinoperation;• Workswithoutpowersupply.

ItalsocanbeusedforproductionofBrinellhardnesstestblocks.

The machine has tungsten carbide ball indenter,usingheavytestingforce(largeindentation),itprovideshighlyaccurateandrepeatablemeasurementresults.

Features:

• Automaticloadingandunloading;• 10testingloadsandscales;• Includessmall,largelatandV-shapetables;•Canbeequippedwithexternalanalogmicroscope orautomaticcamerameasuringsystemwith PCsoftwareforanalysisoftheimprints.

COMMONLYMOST

USED

10 11

Analog Brinell, Rockwell, Vickers Hardness Tester

NOVOTEST TB-BRV

Brinell,Rockwell,VickersHardnessTesterisdesignedtoISO 6508,ASTM E 10,ASTM E92,ASTM E18,ASTM E384,ASTM E103forhardnesstestingofferrous(steel,castiron,lowcarbonsteel and tempered steel, etc) and non-ferrousmetals (aluminum, copper, etc), hard alloys,carbonizedandchemicallytreatedlayers.

Digital Micro Vickers Hardness Tester NOVOTEST

TB-MCV-1A

HARDNESSTesting

NOVOTEST TC-MCV-1A is designed according to ISO6507-2,ASTM E384 for hardnesstesting of carburized and nitride layers, surface hardened layers, hardness of the coatings;ceramic,steel,non-ferrousmetalproducts;sheets,metalfoils,platings,smallandthinobjects(from25μm).Thehardnesstesterhasabuilt-inmicroscopeformeasuringdiagonalsofimprintsandautomaticallycalculateshardnessvaluesintodiferentmicroVickersscales.

ThehardnesstesterimplementsRockwell,BrinellandVickershardnesstestingmethods,whichmakesitauniversalandmulti-functionalmachine.

NOVOTEST TB-BRV has an electric actuator– themain test load is completely automated. Theinstrumentalsoallowsmaximizeeiciencyofusingportablehardnesstesters.Usingthisdeviceusercancheckorproducestandardhardnesstestblocks tocalibrateportablehardnesstestersaccordingtoanyofthemostpopularhardnessscales(HRC,HB,HV).

Features:

• Rockwell,Brinell,Vickersmethods;• Suitableforanymetals;• 37.5Xand75Xmicroscope;• Includessmall,largelat,V-shape andmovabletables.

Themachineallowsusertomaximizetheeiciencyoftheusingportablehardnesstesters,especiallyUCIhardness testers, because TC-MCV-1A implementsdirectmethodofhardnessmeasuring.

Features:

• VickersandKnoopindenters;• Automatichardnesscalculation;• LargecontrastLCDdisplay;• Automaticloading,dwellunloading 10xand40xmicroscope;• Movabletable;• Canbeequippedwithautomatic measuringsystemandPCsoftware.

PRECISION

HIGH

MACHINEHARDNESS TESTERUNIVERSAL

12 13

Distance-Amplitude

Curves (DAC)Various color themes

Real-timeB-scan mode

NOVOTEST UD2301 user interface

Ultrasonic Flaw Detector NOVOTESTUD3701isdesignedfornon-destructivetest-ingofqualityofmetals,plastics,glass,com-positematerials, weld inspection andmea-suringthethicknessofvariousproductsandconstructions.

In contrast to standard type UD3701,UltrasonicFlawDetectorNOVOTESTUD2301ismadeinminiaturehousing,optimalinsizeforperformingtestingintightspacesandoperationin the ield. At the same time law detectorequippedwithaclearcolordisplaywithhighresolution 480x320 pixels, which signiicantlyimprovestheusabilityofthedevice.

Flaw detectors can be equipped withvarious ultrasonic and electromagneticacoustictransducers.

Flaw detector enables to detect defectssuchasdiscontinuitiesandheterogeneityofmaterials insemi-inishedproducts,inishedproducts and welded joints, measure thedepthandthecoordinatesofdefectsdepth,measurethethicknessoftheproducts,mea-surethevelocityofpropagationandattenua-tionofultrasonicluctuationsinthematerial.

UT-probes

The law detector display can operate inanyorientation–all4options,displayrotationby90degreesallowsusertoconigurethede-viceattheleft-handedandright-handed,thedisplaycanbeusedinportraitandlandscapeorientation.

ULTRASONICTesting

Ultrasonic Flaw DetectorNOVOTEST UD3701

Ultrasonic Flaw Detector NOVOTESTUD3701allowsnotonlytocarryoutthetest-ingforpresenceofinternaldefects,butalsoto measure the thickness of products withhighaccuracy.

Works with

EMA probes

Ultrasonic Flaw Detector NOVOTEST UD2301

UltrasonicFlawDetectorNOVOTESTUD2301withcolordisplayandminiaturedimensionsisthebestchoiceforexpertultrasonictesting.

Powerful, lightweight and portablelaw detector in ergonomic shockproofhousing with protective rubber treads –contemporary industrial design of lawdetectorforgeneralpurposes.Devicehassuchfunctionsas:AFS,TVG,DAC,DGS,A-scan,B-scan,etc.

Thelawdetectorallowsuser tosolvea wide range of tasks – from thicknessmeasurements of thin products, to large-sizedcastinglawdetection.

7"NEW

TOUCHSCREEN

Works with

EMA probes

PORTABLE

COMPACTDEVICE

14 15

Ultrasonic CalibrationBlocks NOVOTEST

Ultrasonic Reference BlocksNOVOTEST

Weproducestandardreferenceblocks(V1,V2,etc.) according to ISO, DIN and other standards,which are used for calibration ultrasonic lawdetectorsandUT-probes.Samplesaremadefromlowcarbonine-grainedsteelwithasmalldampingcoeicient.

Custom made calibration blocks with notches(corner relectors)aremadeof thesamematerials(steel,stainlesssteel,aluminumandothers)asthetestedobjects,whereinthegeometry(thicknessandsurface radius of standard sample) has the samecharacteristicsastesteditem.

ULTRASONICTesting

Thickness GaugeCalibration Blocks NOVOTEST

Calibration blocks are used to conigure thesensitivity and duration of scan of ultrasonic lawdetectorsduringtestingofvariousproducts(mainlylatsheetsandpipes).

UltrasonicPhasedArrayFlawDetectorisdesignedfortestingofmetalandcompositeproducts,pipelinewelds, forgingsandcastings,aircraftobjects,corro-sion inspection, etc. in accordance toEN 12668-1, ISO 18563-1.

NOVOTEST UD4701PA can be used both withstandard1 channel transducers andPA16 channelprobes.UsingSAFTmethodthedeviceallowstogethighresolutionandqualityimageofscanning.Usingreplaceableprisms,allowstoavoidwearofthetrans-ducersandinspectanycurvedsurfaces.

Basedoninnovationtechnologies,thedevicehaslightweight(1,5kg)andincludessuchfunctions,asA,B,C,D,S,L-scan,TOFD,DAC,DGS,AFS,AWSmodes, automatic calibrationof ultrasonic velocity,reconstruction mode of weld joints geometry andothers.

Scanning with 16 channelPA probe

S-scan and L-scan

Measuring relative dimensions of the defects using marker

Phased Array Flaw Detector NOVOTEST UD4701PA

These blocks are used for checking themeasurementaccuracyandcalibrationofthicknessgauges.Thereareavailablediferentmetricversions,forexample,withstepsfrom1mmthrough10mm,from2mmthrough20mmorfrom10mmthrough50mm,etc.

The blocks can be produced in accordance with diferentstandards,suchasASTM E-797,etc.fromsteel,stainlesssteel,aluminumandothersmaterialsarealsoavailable.

PHASED ARRAY

NEW

SYSTEM

16 17

ThethicknessgaugeUT-3K-EMAisdesignedforuseinindustrialnetworks,sheetmetalprod-ucts,rodsandotherproductsmadeofsteel,aswellasaluminumandothermetals,withoutusingofcouplant,withoutpreliminarysurfacepreparation,withspacebetweentheprobeandmetalupto3mm.Asagapmaybealayerofrust,alayerofsaltdepositsorothernon-conductivecoating(paint,varnish,enamel,plastic).

ULTRASONICTesting

Pulsedelectro-magnetictechnology implemented intheEMAtransducersallowsusertoputtheprobenotexactperpendicularytothesurface,butupto25degreesofskewandgetcorrectreadings.

Thickness GaugeNOVOTEST UT-3K-EMA

Thickness GaugeNOVOTEST UT-3A-EMA

NOVOTEST UT-3A-EMA is designed to measure thicknessofobjects, suchaspipes, tanks,sheetproducts, shipbottomsandotherparts,madeofmetalsandalloys,withoutapplicationofcouplantandadvancesurfacepreparation,throughairgaporalayerofrust,dirt,saltorothernon-conductivecoatings(paint,varnish, enamel, plastic, etc.) up to 6 mm. Also it is used forevaluationofanisotropydegreeofthematerial.

The device has a bright contrastLCD display, A-scan, B-scan, calibra-tionsettings,threethicknessmeasure-mentmodes:• Automatic;• Manualmode,measurements aremadeusingmaximuminthe irstgate;• Manualmode,measurements aremadeusingtwomaximums intwogates.

Thereadingsofthedeviceareslightlyafectedbyskew,incontrasttotraditionalthicknessgaugeswithpiezoelectrictransducers,whichrequireixationoftheprobeinacertainposition.ThethicknessgaugeUT-3K-EMAusesaspecialdataprocessingalgorithmthatallowsthethicknesstobemea-

sured correctly in the presence of dis-turbingfactorssuchasmetalanisotropy,the presence of several relectors, andthe presence of external interference.Thealgorithmdevelopedbyourspecial-ists allows to reduce the human factorandsimplifytheinterfaceofthedevice.

Connecting a tablet, smartphoneorotherdevicebasedonAndroidOSallowsusertoexpandthecapabilitiesoftheUT-3K-EMAthicknessgaugetothe level of a modern law detector,with the ability to display and saveA-scan, B-scan, the ability to workwith strokes, choose the thicknessmeasurement mode, parameterssignalprocessing,etc.

COATINGTHROUGH

TESTING

USB

CONNECTION

18 19

PortableUltrasonicThicknessGaugeNOVOTESTUT-1Misdesignedforrapidnon-destructivetestingof thicknessofobjectsandconstructionsmadeofdiferentmaterials.

It is used for testing the thickness of:

• Objectsofvariousalloysofmetals;• Objectsofnon-metallicmaterials- composite,glass,plastic;• Hullparts,sheets,vesselwalls;• Transportationandbridgedesign, includingcorrosiondefects(scale,rust);

Advantages:

• Thedevicehasshock-proofrubber protectivecase;• CanbecreatewithanyUT-probes withLemo00connectoroncable;• Storageofmeasurementresults.

Thicknessgaugescanbeequippedwithdiferentultrasonictestingprobes:2,5MHz,5MHz,10MHzandvariouscalibrationblocks.

Uniqueprotectionagainstdustandmois-ture,previouslynotavailableinthemarket.Bydefaultthedevicecomeswithadegreeof dust-moisture protection IP65. The de-vicecanbesuppliedwithreinforcedprotec-tionuptoIP67(submergedinwater).

ULTRASONICTesting

Thickness GaugeNOVOTEST UT-1M-IP

Ultrasonic Thickness Gauge NOVOTEST UT-1M

Unprecedentedautonomyofthedevice-thetimeof continuous operation of the thickness gauge in-creasedto200hours.

Special rubber lining on the side surfaces of thecasingfacilitatestheconvenientretentionofthethick-nessgaugeintheoperator'shand.

Lightweightandsmalldimensions,incompari-sonwithsimilarprotectedthicknessgauges.

UP TO

MOISTUREDUST&

PROTECTION

IP67

20 21

Cross Hatch Adhesion PlateNOVOTEST AH-16276

AdhesiontesterAP-4219isdesignedtomea-sure theadhesivestrengthvalueof thecoatingson diferent structures, as well as to determinetheadhesionvalueofpolymeric insulating tapeswhicharegenerallyusedforpipesinsulation.

Adhesion tester CM-4219 is a device formeasuringtheadhesionvalueofbitumenpipeinsulationandotherinsulatingcoatingswhicharebasedonbitumen.

The instrument is designed to measure theadhesion value of coatings in compliancewithISO 16276-2 andASTM D 3359.

Bitumen And Mastic InsulationAdhesion Tester NOVOTEST CM-4219

Peel Adhesion TesterNOVOTEST AP-4219

Cross Cut Adhesion TesterNOVOTEST AN-2409

COATINGTesting

Mechanical pull-of typeadhesion tester is designedfor measure the adhesionvalue of paints and othercoatings on base and be-tweenlayersorcohesivema-terialsaccordingtoISO 4624,ISO 16276-1 andEN13144.

Tensile Adhesion TesterNOVOTEST AC-4624

AdhesionMultibladeKnifeNOVOTESTAN-2409is designed for adhesion testing by method cuts(parallel or lattice) with thickness range of paintcoatingsup to200µs,according to ISO 16276-2,DIN 53151,ASTM B 335,ASTM D 3002,ISO 2409,NF T 30-038, ASTM B 3359, BS EN ISO 2409,

BS 3900-E6.Devicecanbeusedonlatandcurvedsurfaces.

22 23

ViscosityDipMugisusedtodeterminetheconvection-alviscosityofthedispersionpolyvinylacetate homopoly-mercoarsedispersion.

Thedeviceisacylindricalbrass vessel with a handleand three oriices, two ofthemarelocatedatthesidewallof thecylinder,and thethird – at the centre of thebottom.

DensitytesterNOVOTESTP-2811isdesignedaccordingtoISO 2811-1.

The density is calculated asweight dividedintovolumeoftestedliquid.

Availablemodelsmadefromaluminiumandstainlesssteel.

Density Cup NOVOTESTPYCNOMETER P-2811

Viscosity cups – testing de-vices that intended for mea-surementofrheologicalcharac-teristicsofliquidsubstances.

Viscosity low cup – is oneof the fundamental parametersmeasuring tool for consum-ables.It isusedtotestthevis-cosity of applicable liquids, asvarnishes, paints, oils, liquidinks,andothers.

The instruments can be pro-ducedinaccordancetodiferentstandards.

Available in two models:submersible and with a tri-pod, which are made fromaluminum or stainless steel.

Viscosity Flow CupNOVOTEST VZ

Viscosity Flow CupNOVOTEST VZ-P

Main standards forviscosity cups funnels are:DIN 4 (DIN 53211-87) andUNE

ISO DIN 2431.For American products there

are the appropriate standards:funnel FORD (ASTM D 120087)andZHAN(ASTM D4212-93).

Viscosity Dip MugNOVOTEST VMS

COATINGTesting

24 25

COATINGTesting

Coating Thickness Gauge NOVOTEST TP-1M

Coating thickness gauge is aprecisionmeasuringinstrumentforrapidnon-destructive testing of coatings inaccordancewithstandardISO 2808.

CoatingThicknessGaugeNOVOTESTTP-1M can be equipped with variousprobes for diferent tasks and standardsamplesofvariousthicknesses.

Usercaneasyconnectanotherprobefortestingofotherkindofproducts.

Coatingthicknessgaugeisdesignedtotest:• Thicknessofpaintandotherdielectrics–radioabsorbing,mastic,telon,plastic, electroplatingcoatingsonsteel;• Thicknessofgalvanicandpaintcoatingsonnon-ferromagneticalloysandnon-ferrousmetals;• Thicknessofbitumenandotherthickcoatingsonvariousmetalsandalloys;• Aswellasrelativehumidity,airtemperature,surfacetemperature,dewpointtemperatureanddiference betweensurfaceanddewpointtemperatures;• Measuringgroovesandsurfaceroughness.

Electronic coating thicknessgauge–devicewhichwidelyusedin shipbuilding and automotiveindustriesformeasuringofthecoatingsonmetals,inordertotestthequalityofproducts,alsoitusedfordeterminingtechnicalconditionofthetestedobjects.

METALBASES

FOR

26 27

Pulse Holiday Detector NOVOTEST SPARK-1

COATINGTesting

Coating Thickness Knife TesterNOVOTEST TPN-2808

Analog Surface Profile Gauge NOVOTEST LIMIT

MechanicaldepthgaugeisdesignedaccordingtoASTM D 4417-B,SANS 5772,US Navy NSI 009-32,US Navy PPI 63101-000.

Paint inspection gauge TPN-2808 is designedaccordingtoISO 2808,ASTM B 4138,DIN EN 1071-2tomeasurethethicknessofbothsingleandmultiplelayercoatingsonanygrounds,bothmetallicandnon-metallic.

It is used for (dependingon coniguration): measuresthe peak-to-valley heightof a blast cleaned surface;measurement the depth offocal corrosion; measuresdepth of narrow holes andgrooves.

The electrolytic law detector(detectorofporosity)NOVOTESTED-3Disdesignedforrapidnon-destructivetestingofcontinuityof coating thickness up to500μminaccordancewithstandardASTM G62-A.

Pinhole DetectorNOVOTEST ED-3D

Theoperationprincipleofdeviceisbasedontheixationthebreakdownoflocationsbetweentheirstelectrodewhichis connected to the high-voltage source and the secondelectrode,which isconnected to thepipe (orother testingobjects).

Pinholedetectorisintendedfortestingofporosity,notdyedplaces,andotherviolationsofthecontinuityofprotectivedielectriccoatingsonthemetalobjects.

NOVOTESTSPARK-1isdesignedaccordingtoASTM G62-

07,ISO 2746:1998 & AS3894.1-2002, ANSI/AWWAC214-07,ANSI/AWWA C213-07,ASTM D4787-08,NACE RP0274-

2004,NACE RP0490-2007,NACE SP0188-2006fortestingthecontinuityofinsulationcoatings(polymer,epoxy,bitumen,etc.)ofpipelines(oil,gas,etc.)andotherproducts.

FOR ANY

BASES

ALMOST

28 29

COATINGTesting

Dew Point MeterNOVOTEST KTR-1

Grindometer NOVOTEST M-1524

DewPointMeterNOVOTESTKTR-1isdesignedforrapidtestingofairtem-perature and humidity, dew point cal-culationandsurfacetemperaturemea-surementbynoncontactmethod.

Dew point meter measures: rela-tive humidity, air temperature (-10 to+60°C),thesurfacetemperature(-20to+380°C).

And calculates: dew point, the dif-ferencebetweenthedewpointandthetemperatureofthesurface.

The instrument isdesigned todetermine thehardnessofcoatingsbypencil leadsaccordingto:ASTM D 3363,EN13523-4,ISO 15184:2012,ECCA T4,JIS K 5600-5-4.

The instrument isused todetermineparticlesizeandinenessofgrind fordiferentmaterials,suchaspaints,inks,coatings,chocolatesandothersimilarproducts.

NOVOTEST M-1524 is designed in accordance with:ASTM D 1210, AS/NZS 1580.204.1, DIN 53203, EN 21524,

FTMS 141 4411.1, ISO 1524, JIS K 5600-2-5.

Pencil Hardness Tester NOVOTEST PH-3363

Buchholztesterisusedforhardnessmeasurementsofcoatingsusingtheindentationmethod(bevelleddiscofsteelblockwithconstanttestload).

BuchholzCoatingHardnessTesterNOVOTESTBH-2815isstandardizedaccordingto:DIN 53153,ISO 2815,BS 3900-E9,NF T30-052.

Buchholz Coating Hardness Tester NOVOTEST BH-2815

Film applicator AU-823 is designed for applyinglayers of paint and other materials with requiredthickness of the plate during the complex testsaccordingtoASTM D 823-E.

Film Applicator NOVOTEST AU-823

30 31

Device is used for determining the adhesion andresistance to damage by scratching method. Thedevice complieswith the requirements ISO 12137-1,ASTM D 5178,ASTM D 2197.

COATINGTesting

Scratch Hardness Coating Tester NOVOTESTSH-1518(balltype)isusedforhardnesstestingofcoatings(paint,mastic,plasticandothers)throughdeterminingthehardnessresistancetoindentationoftheballtipwith1mmdiameter.

Scratch Hardness Coating TesterNOVOTEST SH-1518

Scratch Adhesion Tester NOVOTEST C1-5178

NOVOTESTSH-1518 isdesignedaccordingtoISO 6441.Alsoitusedforanalysistheresistanceofthecoatingforscratching(ISO 1518).

Erichsen CuppinngTester NOVOTEST SE-1520

Erichsen Cuppinng Tester isdesigned for testing of elasticityand strength of coatings withcup-shaped curve, according toISO 1520, ISO 20482:2013.

The Ericksen’s device is used for determining the strength of the coating at theindentationofsphericaltippunchwithdiameterof20mminthecoatingofthesample,thepositionofwhichisixedonamatrixwithinternaldiameterof27mm.

Impact TesterNOVOTEST STRIKE-U6272

NOVOTEST STRIKE-U6272is designed for determining thestrength of the ilm during theimpact.

Constructionoftheinstrumentismade in accordancewithmodernrequirements of ISO 6272-2002

andISO 21809.The device is used for testing

ofmetals,plastics,parquet,wood,ceramics, glass, concrete andscreed.

32 33

ThedevicecomplieswithISO 1519-73,DIN 53 152andappliestopaintsandspeciiesamethodfordeterminingtheelasticityoftheilmbybending.

Thedeviceallowstomeasuretheelasticityandstrengthofcoatingsthroughbendingthemetalplatewithtestedcoatingaroundasetofcylindricalrodswithdiametersfrom2mmto32mm.

The NOVOTEST BEND-6860 is used to determinetheelasticityor resistance, adhesionandelongationofcoatingson sheetmetal in accordancewith ISO 6860,

ASTM D 522-A, BS 3900-E11, ECCA T7.

The NOVOTEST BEND-H1500 is designed for determining the elasticity, adhesion,crackingofpaintcoatingsonsamplesinaccordancewithASTM D 522-B, ASTM D 1737,

AS/NZS 1580.402.1, BS EN3900-E1, DIN 53152, ISO 1519-1, NF T30-040, JIS K 5600-5-1.

Thedevicefortestingtheelasticityandstrengthofthecoatingsduringbendingaroundasetofcylindricalrods,withdiametersofrodsfrom1mmto20mm.

Bending Coating TesterNOVOTEST BEND-H1519

Bending Coating Tester NOVOTEST BEND-M1519

Bending Test Conical MandrelNOVOTEST BEND-6860

Bending Coating Mandrel TesterNOVOTEST BEND-H1500

COATINGTesting

NOVOTESTBEND-H1519complieswithISO 1519-73,

ASTM D 522, ISO6860 which applies to paints andvarnishesanddescribebymethodfordeterminingtheelasticityoftheilmbending.

The sample is clamped against a conicalmandrelandisbentaroundthemandrelbyarollermountedonahandoperatedlever.

The diameter of the mandrel at the pointwherethecoatingofthesamplestartstocrackcan be determined from a scale (3-37 mm)markedonthesampleclamp.

34 35

CONSTRUCTIONMATERIALSTesting

Ultrasonic Tester of BuildingMaterials (Concrete) StrengthMeterIPSM-U+T+Disdesignedforrapidnon-destructivetest-ingofstrengthofconcrete,compositebricksandotherbuild-ingmaterials.ThedevicecomplieswithEN 12504-4,ASTM C

597-02, ISO 1920-7:2004, IS13311, CECS 21standards.Ultrasonicdeviceallowsmeasurementstrength

with surface sounding and through soundingmethodsbymeasuringtherateandtimeultrasonicwavepropagationintestedobjects.

NOVOTESTIPSM-U+T+Disdesignedforde-tectingvoids,cracksanddefectsthathavearis-enduringmanufactureandoperationandmea-suringthedepthofcracksindiferentobjects.

Thedevicehasbuilt-inmemoryandtheabilitytotransmitsavedmeasurementstoPC.

Also ithas:modeof thesignalvisualization (A-scan), theabilityof testingconcrete (andother)constructionsforinternaldefectsanddiscontinuities,alsoincreasestheaccuracyofmeasuringtimeintervalsbymanualtimingofthemomentactivationofmeasurer.

Thedevicecanbeequippedwithsurface-soundingprobeor/andprobesforthrough-sounding.

Concrete rebound Schmidt hammer isdesignedforstrengthtestingofconcreteandotherbuildingmaterialsthroughim-pactingmethod,which is correspondwith ASTM C 805; ASTM D 5873;

DIN 1048;ENV206;EN 12 504-2;ISO /DIS 8045.

Concrete Cover Meter NOVOTEST Rebar Detector

Concrete Rebound SchmidtHammer NOVOTEST SH

ConcreteCoverMeterNOVOTESTRebarDetectorworksinamodeofconstantscanningofthetestsurface.Foreasyoperationwiththe

device, it has a function ofsoundsearch.Increasingthefrequencyoftheaudiosignalindicates the oncoming ofthe probe to the reinforcingelement that allows user towork without continuousmonitoringofdevicesdisplay.

Basic functions:

●Measuringthedepthofreinforcementanditsdiameter;●Identiicationofareasfreeofreinforcementstructures;●Operativecontroloverthequalityofreinforcementofreinforcedconcretestructuresandproductsbymagneticmethodsinconstruction,onenterprises;●Controlofphysicalandtechnicalcharacteristicswhenexaminingtheintegrityofbuildingsandstructures.

Strength Meter NOVOTEST IPSM-U+T+D(Pulse Velocity Tester)

Thedeviceisdesignedforrapidnon-destructivetestingofreinforcedconcreteproductsandstructuresinaccordancetoBS 1881,Part 204,DIN 1045,DGZfP B2,SN 505262,SS 78-B4.NOVOTEST Rebar Detector operates on technology of magnetic ields and is used for

technologicaltestingatbuildingsandfactories,aswellastheplannedexaminationofvariousstructuresandbuildings.

36 37

Gaussmeter (magnetometer) NOVOTEST MF-1

GaussmeterNOVOTESTMF-1isaversatileandhighlyaccuratediagnosticdevicethatoperatesontheprincipleofHallefect.

MagnetometerMF-1isusedfor:determinationofcomplianceofequipmenttorequiredspeciicationsandthepossibilityoffurthertesting,testingofthelevelofinductionieldsoftestedobjectandcomponentsordevicesduringthediagnostic

Magnetic law detectoris based on the method ofnon-destructive testing usedfordetectingviolationsof themagnetic surface of metalstructures and structures offerromagneticmaterials.

Steel Structure Analyzer (structurescope)isdesigned for non-destructivequality testingof chemical-thermal, thermal and thermo-mechanicaltreatments.

SteelStructureAnalyzerallowstodeterminethe mechanical properties and hardness ofmetalsandto test the ferromagneticproductsifthereareanycorrelationsbetweentestedpa-rameters.

MagneticTestBlocksareusedtocheckthesensitivityofmagneticparticleandpenetrantinspectionmaterials.

Samples are available with diferent size of cracks,surface and subsurface defects and longitudinal andtransverseindications.

Magnetic Test Blocks NOVOTEST

Steel Structure AnalyzerNOVOTEST KRC-M-2

MAGNETICTesting

In addition, thedevice is used fortesting the surfacelayers of ferromag-netic materials andthe metal for pre-sortingsteelgrades.

work with the method of magneticparticle, testing of level of residualmagnetization, level of industrialnoise,levelofmagneticields.

Magnetic Flaw Detector (Permanent Magnetic Yoke) NOVOTEST MPD-DС

Incaseofthebanregulationsoftheequipmentwithpowersupply, ordiicultieswith its supply,Magnetic FlawDetectorNOVOTESTMPD-DС is the only one instrument for the re-quiredtesting.

38 39