30/3 Anamai Ngam Charoen 31 Alley, Tha Kham, Bang Khun Thian, Bangkok, Thailand

Tel: 02-464-7717, 02-464-7718Mobile: 089-226-2150, 081-984-2325, 086-386-3555

Scan QR Code forWheelchair User Guide

Automatic Wheelchair for Car User’s ManualUSER MANUAL

Index

Wheelchair specially designed for elderly

Accessories user guide

User guide for electronic wheelchair for elderly

User guide for wheelchair and handling guide

Caution in operating wheelchair for elderly

Primary inspection and diagnostic

Manual handling during automatic function error

01-02

03

04

05-08

09-10

11

12

WELCABWHEELCHAIR

Wheelchair for elderly OPTION A-B Electronic wheelchair for elderly, dissemble mechanic

Top Model (Option A) Electronic movement Seat lifting mechanicFunctions

Functions

- Total genuine leather cover- Adjustable arm- Removable metal feet rest- High grade rubber wheel with cover- Back wheel disk brake- Stationary safety lock- 180 backrest adjustability- Adjustable head rest- Safety chest strap- Net weight 48 kg.

- Directional control joystick- 6 Km./H. top speed- 2-3 Hours battery life- Charging support normal output and car output - Can be used manually- Net weight 48 kg

- Genuine leather + PVC cover- Adjustable back rest- Seat detachable from car- Cannot be dissemble for strolling

Standard model (Option B)- Genuine leather + PVC cover- Non-adjustable arm- Fixed-plastic feet rest- High grade rubber wheel, no cover- Back wheel disk brake- Stationary safety lock- 180o backrest adjustability- Adjustable head rest- Safety chest strap- Net weight 43 kg.

Lifting Hydraulic Mechanic for Car Transport- Parking position sensor- Smooth motion wheelchair lift- Limit sensor warning different floor level while descending- Automatic stop and warning sound when detect obstacle- Remote controller and wired controller- All parts assembled and installed domestically (in house by manufacturer)- Mechanic control system (in house by manufacturer)- Imported hydraulic from Italy

Accessories user guide Accessories user guide, Electronic model

1

123456

23

5

6

4

*** For electric model only ***

How to charge electric wheelchair

Joy Controller

Unlock to use wheelchair manually function

Lock to use electronic drive function

Connect adapter to 220V power output and connect the other end to the Joy ControllerRed indicator means wire is liveOrange indicator means chargingGreen indicator means battery fully charged

Accessories1. Fuse 5A2. Remote controller3. Wrench size 134. Hex key wrench 8 mm.

Battery statusOn/Off buttonHornSpeed indicatorSpeed controlDirection control joy stick

Wheelchair lift remote controller

Wheelchair lift wired controllerHold DOWN button: Descend the wheelchairHold UP button: Ascend the wheelchair*to stop wheelchair in the desired position, release button immediately. The motion will only resume when button is pressed.

Hold A button: Descend the wheelchairHold B button: Ascend the wheelchair

1 2 3 4

User guide for wheelchair and handling User guide for wheelchair and handling

Wheelchair ascending stepsWheelchair descending steps1. Slide the door open to full extend (fixture 1)2. adjust back rest by 10 degrees to clear the head position from the ceiling.3. Hold A or Down button to descend wheelchair.4. While wheelchair is descending, clear all obstacle from the rotation path (wheelchair might stick at the adjacent seat).5. Wheelchair can be strolled once the system indicates steps complete sound.6. Limit sensor will warn immediately when the height of the floor exceeds maximum capacity.

Caution Caution

The system is reset once the limit sensor touches the floor level and indicate with long beep sound

** sound indication if wheelchair is not locked into position

1. Attach wheel chair to the lock in position 12. Both back wheel must touch the lift system.3. Once the wheelchair is locked into position, Hold B or Up button until the lifting system ascend the wheelchair to its resting position.4. There will be indication sound every time the step is completed.5. If the wheel chair is not locked into position, the system will stop mid process and indicate 2 consecutive beep sound.6. Hold A or Down button until the wheelchair descends and rest on the ground in starting position to reset the system. Once stationary, check that the wheelchair is locked into position and repeat step 1,2, and 3

1 1

2

3 3

4

4

5

566

User guide for wheelchair and handling User guide for wheelchair and handling

1 2

3 4

5 6

21

43

7 8

5

How to adjust arm rest- Arm rest lock is positioned under the arm rest- Pull the lock to adjust position (fixture 2)- Pull arm rest up to adjust position

How to adjust head rest- Head rest can be adjusted up-down and removed

Safety belt- Using safety belt while transporting in car (fixture 3)- Using safety belt while operating wheelchair (fixture 4)

Assistant paddle- Stepping on assistant paddle will help lifting the front wheel in for some circumstances which required.

How to disassemble feet rest- Press stainless button at position on fixture 3 and adjust feet rest to the side.- Fee rest can be pull up or removed (fixture 4)

How to lock wheelchair- To unlock wheel, pull the lock up to resting position (fixture 5)- To lock wheel, pull the lock down to resting position (fixture 6)

How to adjust back rest- Pull back rest adjuster and adjust to desired position. The wheelchair support up to 180 degrees

Remark : When ascending-descending steps are completed, there will always be sound indication * Caution : Please wait for sound indication before strolling

1. Do not lock the wheel 2. Do not slide arm rest down 3. Do not adjust feet rest to the side

Caution in operating wheelchair for elderly Caution in operating wheelchair for elderly

Caution in using wheelchair

Warning !! Before using lift function please check the following

1. Please be careful of the ceiling during lifting operation. Adjust the back rest to clear the rest from ceiling path

2. Please be careful of the car frame during lifting operation. Adjust the feet position before using lifting function

Primary inspection when lifting function is error

Check 2 fuse position1. Check fuse 5A at position 1 (Fixture 1)2. Check fuse at car battery (Fixture 2)

* If both fuses are normal, please move the mechanic into resting position (Fixture 12)

Manually handling during automatic function error

Status : Fuse is normal, ready for use Status : Fuse is damaged, do not use

1 2

3 4

65

1. Remove the screw from hydraulic (counter clock-wise) using the wrench (fixture 1).2. Adjust the mechanic part to position 2.3. Loosen the screw using the wrench and slide the screw to unlock position (fixture 3).4. Adjust the mechanical part to position 4 (apply only to model with slider)5. Loosen the screw using the wrench and slide the screw to unlock position (fixture 5).6. Move mechanical part back and screw all parts back.

Manual handling during automatic function errorPrimary inspection and diagnostic

1

2

For enquiry/equipment error report 095-701-7111

Before manually handling the mechanical part, please report

095-701-7111