ns1000 v3.0 - system resource and peripheral incensement -
DESCRIPTION
NS1000 V3.0 - System Resource and Peripheral Incensement -. Rev1.1 31 July, 2013. Table of Contents. 1. Overview 2. What is enhancement 3. How to program. Chapter 1 Overview. 1. Overview. Solution. Selectable System capacity (flexibility configuration) . * Features New for V3. - PowerPoint PPT PresentationTRANSCRIPT
1
NS1000 V3.0
- System Resource and Peripheral Incensement -
Rev1.1 31 July, 2013
2
Table of Contents
1. Overview2. What is enhancement 3. How to program
3
Chapter 1Overview
4
1. OverviewSelectable System capacity (flexibility configuration) Solution
3 types of system capacity patternsFeatures and Benefits >>
When you want to increase NT-phone capacity or H.323 capacity, you can change the system capacity on customer demand.
NS1000 supports TDA100D via Stacking card. TDA100D is added for Legacy Gateway of NS1000.
* Features New for V3
5
NS1000 adds new 2 types of system capacity patterns. System capacity can be selectable based on customer demand. Type-1: Standard Type (same as version 1.x & 2.x) Same as current System resource. This type will be used for the user who satisfy current system configuration. Type-2: IP Extension Type Increase number of IP terminal and decrease number of SIP terminal This type may be used for the user who want to increase NT phone. Type-3: System Resource Type Increase Tenant and H323 expanding This type may be used for the user who want to increase more Tennant and/or Q-Sig node Note: This selection must be set when proceeding Easy Setup Wizard
TDA100D Cabinet can be Legacy GW for NS1000.
Add supported optional cards for Legacy GW.
1. Overview
6
Chapter 2What is enhancement
7
When select Type2 mode, IP-PT extension capacity will be increased up to 640.In Type3 mode, SIP extension capacity will be changed.
2-1 Selectable System capacity
Type Stand alone One Look Type1 Extension Capacity 640 1000
IP-PT (KX-NT series) 256 1000SIP 640 1000
SIP Phone 640 1000KX-UT series 640 1000
Type 2Extension Capacity 640 1000
IP-PT (KX-NT series) 640 1000SIP 256 1000
SIP Phone 256 1000KX-UT series 256 1000
Type 3Extension Capacity 640 1000
IP-PT (KX-NT series) 256 1000SIP 384 1000
SIP Phone 384 1000KX-UT series 384 1000
Selectable Extension capacity
8
When select Type3 mode, IP-GW (H323) capacity will be increased up to 96Selectable IP-GW Capacity
Type Stand alone One Look Type1 IP GW 256 256
H323 48 96SIP 256 256
Type2 IP GW 256 256
H323 48 96SIP 256 256
Type3IP GW 256 256
H323 96 128SIP 160 256
2-1 Selectable System capacity
9
When select Type3 mode Tenant Group capacity will be increased up to 128Type Stand alone One Look
Type1 - Tenant
Tenant Group 32 32Time Table 32 32System Speed Dial 1000/Tenant 1000/Tenant
Type2 - Tenant
Tenant Group 32 32Time Table 32 32System Speed Dial 1000/Tenant 1000/Tenant
Type3 - Tenant
Tenant Group 128 128Time Table 128 128System Speed Dial 300/Tenant 300/Tenant
Selectable Tenant Group capacity
2-1 Selectable System capacity
10
COS 512, Carrier 128 per standalone unit
Increase COS and Carrier for each Unit
Other resources will be increased
Resource Before (V1,V2) After (V3)Type1
ARS Carrier 48 128No. of COS Group 64 512
User Group 96 256
Type2
ARS Carrier 48 128No. of COS Group 64 512
User Group 96 256
Type3
ARS Carrier 48 128No. of COS Group 64 512
User Group 96 256
2-1 Selectable System capacity
11
2-2 Add TDA100D as Legacy GW
Legacy Gateway by KX-TDA100D
Cabinet of KX-TDA100D can be used as Legacy Gateway to expand legacy trunks and phones. NS1000 can have stacking connection with TDA100D by changing MPR card to STACK-S card in TDA100D same as TDE series (KX-NS0132).
KX-TDA100D is allowed to be set with another KX-TDA100D on a NS1000 as Legacy Gateway. TDA100D add as additional GW category.
Insert STACK-S card
Remove MPR card
TDA100DStack-S card S/W Version should be 2.000 or later
- Category1: NCP500 /NCP1000 - Category2: TDE100/200, TDA100/200 - Category3: TDE600/620, TDA600/620 - Category4: TDA100D
1212
The maximum number of Legacy Trunk and Extension
Stand-alone Stacking system
One LookNetworkingMain Main
1NCP5001NCP1000
1TDE/TDA1001TDA100D
1TDE/TDA 2001TDE/TDA 600
2NCP5002NCP1000
2TDE/TDA 1002TDA100D
2TDE/TDA 2002TDE/TDA 600
Trunk(ch) 256 256 600Legacy 30 0 64/64/120/120/128/160 128/128/240/240/256/256 600
LCOT 2 0 12/16/96/112/128/160 24/32/192/224/256/256 600BRI 8 0 12/16/96/112/128/160 24/32/192/224/256/256 600PRI23 23 0 46/46/92/92/92/115 92/92/184/184/184/230 600PRI30 30 0 60/60/120/120/120/150 120/120/240/240/240/256 600T1 0 0 48/48/96/96/96/120 96/96/192/192/192/240 600E1 0 0 60/60/120/120/120/150 120/120/240/240/240/256 600
Extension(ch) 640 640 1000Legacy*1 2 0 44/44/128/120/168/240 88/88/256/240/336/480 1000
SLT 2 0 36/36/96/120/128/240 72/72/192/240/336/480 1000DPT 0 0 40/40/96/112/128/160 80/80/192/224/256/320 1000
*1 : The maximum number with DXDP
2-2 Add TDA100D as Legacy GW
Legacy Gateway by KX-TDA100D
1313
Following cards are supported for Legacy Gateways
2-3 Add Optional cards
Optional cards for Legacy Gateway
Model Symbol DescriptionKX-TDA1176 MCSLC16 16-Port Single Line Telephone Card with Message Lamp
Interface
KX-TDA1178 MCSLC24 24-Port Single Line Telephone Card with Message LampInterface
Model Symbol DescriptionKX-TDA6179 EMCSLC24 24-Port Single Line Telephone Card with CID &
MessageLamp Interface
Model Symbol DescriptionKX-TDA1180 CLCOT8 8-Port Analogue Trunk Card with CID
KX-TDA1186 CLCOT8E 8-Port Analogue Trunk with Caller ID daughter Card
For TDE100/200, TDA100D
For TDE600/620
For TDA100D
14
Chapter 3How to Program
15
3. Howe to Program
System Initialize > Easy Setup Wizard
It is necessary to select the type while proceeding Easy Setup Wizard, when you want to change System Capacity Type. System Capacity Type can’t be changed while system running unless initialize NS1000.
Note: You can not select System Capacity Type when you upgrade software from Version 2 to Version 3 without Off-Line Tool.
16
END
17
Appendix
18
Appendix
System capacity
When you select type 2 or type 3 system capacity, V-SIPEXT capacity is changed at each type. Default : <Type 1> 20 cards (640 ports)
System Capacity Type 2SIPEXT : 8 cards (256 ports)
System Capacity Type 3SIPEXT : 12 cards (384 ports)
19
Modification
20130730-01 5 NS1000 V3.0 System Resource and Perifperal_Rev1.0_30Jul2013.pptx - 1st release20130731-01 Modified page 5 ‘overview’ and page 13 ‘Description for card’ . - Revision 1.1