ntc thermistors - datasheet.octopart.com · cat.no.r44e-9 murata manufacturing co., ltd. ntc...

Cat.No.R44E-9

MurataManufacturing Co., Ltd.

NTC Thermistors

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R44E9.pdf 05.4.13

1

2

3

4

5

6

7

Part Numbering 2

Basic Characteristics 5

for Temperature Compensation 0201 (0603) Size 6




for Temperature Compensation Temperature Characteristics (Center Value) 14

Chip Type !Caution/Notice 17

Chip Type Package 20

for Temperature Sensor Lead Type 23

for Temperature Sensor Lead Insulation Type 24

for Temperature Sensor Temperature Characteristics (Center Value) 26

for Temperature Sensor Lead Type/Lead Insulation Type !Caution/Notice 27

for Temperature Sensor Lead Type/Lead Insulation Type NTSA/NTSD Series Package 28

for Inrush Current Suppression Lead Type 29

Current-R Ratio (RT/R25) / Current-Temperature Characteristics (Typical) 31

for Inrush Current Suppression Lead Type !Caution / Notice 35

for Inrush Current Suppression Lead Type Package 37

1

2

3

4

5

6

7

CONTENTS

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Recycled Paper


!Note R44E9.pdf 05.4.13

2


o Part Numbering

qProduct ID

wSeries

yResistance Tolerance

uIndividual Specifications

NTC Thermistors for Temp. Sensor and Compensation Chip Type

NC NTC Thermistors Chip Type E

F

J

K

P

±3%

±1%

±5%

±10%

03

Individual Specifications

Product ID

Code

Code

Series

Resistance Tolerance

Code

(Part Number)

tResistance

Expressed by three figures. The unit is ohm (Ω). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. If there is a decimal point, it is expressed by the capital letter "R". In this case, all figures are significant digits.

Structures and others are expressed by two figures.

Please contact us for details.

102

103

104

Ex.)

1kΩ

10kΩ

100kΩ

Code Resistance

Standard Type

iPackaging

RA

RB

RC

RL

Plastic Taping 4mm Pitch

Paper Taping 4mm Pitch

Paper Taping 2mm Pitch (10000 pcs.)

Paper Taping 2mm Pitch (15000 pcs.)

Code Packaging

Plated Termination Series

eDimensions (LgW)

03

15

18

21

Code Dimensions (LgW)

0.60g0.30mm

1.00g0.50mm

1.60g0.80mm

2.00g1.25mm

EIA

0201

0402

0603

0805

rTemperature Characteristics

WB

WD

WF

WL

WM

XC

XF

XQ

XH

XM

XV

XW

Code Temperature Characteristics

Nominal B-Constant 4050e4099K












y

J

e

18

w

P

r

XH

t

103

u

03

i

RBNC

q


!Note R44E9.pdf 05.4.13

3


qProduct ID

wSeries

tResistance Tolerance

yIndividual Specifications

NTC Thermistors for Temp. Sensor and Compensation Lead Type

NT NTC Thermistors E

F

±3%

±1%

E1

N6

PB


Product ID Code Resistance Tolerance

Code

(Part Number)

rResistance


A lead structure and other specifications are expressed by two digits.

202

203

Ex.)

2kΩ

20kΩ

Code Resistance

Standard Bulk (NTSA, NTSD0 Series)

Standard Taping (NTSA Series)

Standard Bulk (NTSD1 Series)

SA0

SD0

SD1

for Temperature Sensors No Lead-coating Type

for Temperature Sensors Lead-coating Type(Total Length 30mm max.)

for Temperature Sensors Lead-coating Type(Total Length 30 to 50mm)

Code

uPackaging (NTSA/NTSD0 Series)

A0

B0

Ammo Pack

Bulk

Code Packaging

uTotal Length (NTSD1 Series)

30

40

50

30mm

40mm

50mm

Code Total Length

Series

eTemperature Characteristics

WB

WC

WD

WF

XM

XH

XR

XV









Code Temperature Characteristics

t

F

w

SA0

e

XH

r

103

y

E1

u

B0NT

q


!Note R44E9.pdf 05.4.13

4


y

B0

e

160

r

L

t

BMNT

q w

PA7

qProduct ID

wSeries

rResistance Tolerance

tIndividual Specifications

NTC Thermistors for Inrush Current Suppression

NT NTC Thermistors L

PA7

PA9

PAA

PAD

PAJ

PAN

±15%

DK

DN

BM


Product ID

Code

Code

Series

Resistance Tolerance

Code

(Part Number)

eResistance


A lead structure and other specifications are expressed by two capital letters.

3R0

100

Ex.)

3Ω

10Ω

Code Resistance

Standard Type

Standard Type

Standard Type

yPackaging

A0

B0

Ammo Pack

Bulk

Code Packaging

Body Diameter

ø18mm, ø22mm

ø10mm, ø13mm

ø7mm, ø9mm

Inrush CurrentSuppressionLead Type

ø7mm

ø9mm

ø10mm

ø13mm

ø18mm

ø22mm

Nominal Body Diameter


!Note R44E9.pdf 05.4.13

5

1. Zero-power Resistance of Thermistor : R

2. B-Constant

R=R0 expB (1/T-1/T0) ..............(1)R : Resistance in ambient temperature T (K)(K : absolute temperature)R0 : Resistance in ambient temperature T0 (K)B : B-constant of Thermistor

as (1) formulaB=Rn (R/R0) / (1/T-1/T0) ............(2)

3. Thermal Dissipation Constant

When electric power P (mW) is spent in ambient temperature T1 and thermistor temperature rises T2, there is a formula as followsP=C (T2-T1) ..................(3)C : Thermal dissipation constant (mW/°C)Thermal dissipation constant is varied with dimensions, measurement conditions, etc.

4. Thermal Time Constant

Period in which Termistor's temperature will change 63.2% of its temperature difference from ambient temperature T0 (°C) to T1 (°C).

[Resistance vs. Temperature]

!Basic Characteristics

!Performance

[Thermal Time Constant]

Item

Resistance

Condition

Measured by zero-power in specified ambient temperature.

Rated Electric Power Shows necessary electric power that Thermistor's temperature rises 100˚C by self heating in ambient temperature 25˚C.

Permissive Operating Current It is possible to keep Thermistor's temperature rising max. 1˚C

Thermal DissipationConstant

Shows necessary electric power that Thermistor's temperature rises 1˚C by self heating.It is calculated by next formula. (mW/˚C)

B-Constant

Calculated between two specified ambient temperatures by next formula.T and T0 is absolute temperature (K).

Rn (R/R0)B =

1/TY1/T0

PC =

TYT0

102

101

Res

ista

nce

VS

. Tem

pera

ture

Cha

ract

eris

tics,

R/R

25

−20Temperature (˚C)

0 20 40 60 80 12010010−2

10−1

1

B=3450B=3900B=4100

Basic Characteristics

T1

T0

Time

63.2%

X

Tem

pera

ture


Please inquire about test conditions and ratings.


!Note R44E9.pdf 05.4.13

6

1


NTC Thermistorsfor Temperature Compensation 0201 (0603) Size

0201/0402/0603/0805 sized Chip NTC Thermistor have Ni barrier termination and provide excellent solderability and offer high stability in environment by unique inner construction.

Features1. Excellent solderability and high stability in environment2. Excellent long time aging stability3. High accuracy in resistance and B-constant4. Reflow soldering possible5. Lead is not contained in the product.

Applications1. Temperature compensation of transistor, IC, crystal oscillator of mobile communications equipment2. Temperature sensor for rechargeable batteries3. Temperature compensation of LCD4. Temperature compensation and sensing of car audio equipment (CD, MD, Tuner)5. Temperature compensation of several kinds of circuits

Electrode(Ag System + Ni Plating + Sn Plating)

0.15±0.05 0.15±0.050.60±0.03

(in mm)

0.30

±0.0

30.

30±0

.03

Part NumberResistance

(25°C)

B-Constant(25-50°C)

(K)

Permissive OperatingCurrent (25°C)

(mA)

Rated ElectricPower (25°C)

(mW)

Typical DissipationConstant (25°C)

(mW/°C)

OperatingTemperature Range

(°C)

NCP03YS110p05RL 11ohm 2750 ±3% 9.50 100 1.0 -40 to 125

NCP03YS220p05RL 22ohm 2750 ±3% 6.70 100 1.0 -40 to 125

NCP03YS330p05RL 33ohm 2750 ±3% 5.50 100 1.0 -40 to 125

NCP03YS470p05RL 47ohm 2750 ±3% 4.60 100 1.0 -40 to 125

NCP03YS680p05RL 68ohm 2750 ±3% 3.80 100 1.0 -40 to 125

NCP03YS101p05RL 100ohm 2750 ±3% 3.10 100 1.0 -40 to 125

NCP03XH682p05RL 6.8k ohm 3380 ±3% 0.38 100 1.0 -40 to 125

NCP03XH103p05RL 10k ohm 3380 ±3% 0.31 100 1.0 -40 to 125

NCP03XH153p05RL 15k ohm 3380 ±3% 0.25 100 1.0 -40 to 125

NCP03XH223p05RL 22k ohm 3380 ±3% 0.21 100 1.0 -40 to 125

NCP03WF333p05RL 33k ohm 4250 ±3% 0.17 100 1.0 -40 to 125

NCP03WB473p05RL 47k ohm 4050 ±3% 0.14 100 1.0 -40 to 125

NCP03WL473p05RL 47k ohm 4485 ±3% 0.14 100 1.0 -40 to 125

NCP03WF683p05RL 68k ohm 4250 ±3% 0.12 100 1.0 -40 to 125

NCP03WL683p05RL 68k ohm 4485 ±3% 0.12 100 1.0 -40 to 125

NCP03WF104p05RL 100k ohm 4250 ±3% 0.10 100 1.0 -40 to 125

NCP03WL104p05RL 100k ohm 4485 ±3% 0.10 100 1.0 -40 to 125

NCP03WL154p05RL 150k ohm 4485 ±3% 0.08 100 1.0 -40 to 125

NCP03WL224p05RL 220k ohm 4485 ±3% 0.06 100 1.0 -40 to 125

A blank column is filled with resistance tolerance codes. (J: ±5%, K: ±10%)


!Note R44E9.pdf 05.4.13

7

1


Standard Land Dimensions

Chip

a

a b c

c

b

Land

Solder Resist

Soldering Methods

Reflow Soldering

(in mm)

0.25 0.30.25


!Note R44E9.pdf 05.4.13

8

2



0201/0402/0603/0805 sized Chip NTC Thermistors have Nibarrier termination and provide excellentsolderability and offer high stability in environmentby unique inner construction.

Features1. Excellent solderability and high stability in environment2. Excellent long time aging stability3. High accuracy in resistance and B-constant4. Reflow soldering possible5. Same B-constant in the same resistance in the three sizes (0805/0603/0402) Easy to use smaller size in the circuits6. Lead is not contained in the product.7. NCP15/18/21 series are recognized by UL (UL1434, File No. E137188 Vol. 2, Sec. 2)


Electrode(Ag Alloy + Ni Plating + Sn Plating)

0.25±0.10 0.25±0.101.0±0.05

(in mm)

0.5±

0.05

0.5±

0.05


(25°C)


(K)


(mA)


(mW)


(mW/°C)


(°C)

NCP15XC220p03RC 22ohm 3100 ±3% 6.70 100 1.0 -40 to 125

NCP15XC330p03RC 33ohm 3100 ±3% 5.50 100 1.0 -40 to 125

NCP15XC470p03RC 47ohm 3100 ±3% 4.60 100 1.0 -40 to 125

NCP15XC680p03RC 68ohm 3100 ±3% 3.80 100 1.0 -40 to 125

NCP15XF101p03RC 100ohm 3250 ±3% 3.10 100 1.0 -40 to 125

NCP15XF151p03RC 150ohm 3250 ±3% 2.50 100 1.0 -40 to 125

NCP15XM221p03RC 220ohm 3500 ±3% 2.10 100 1.0 -40 to 125

NCP15XM331p03RC 330ohm 3500 ±3% 1.70 100 1.0 -40 to 125

NCP15XQ471p03RC 470ohm 3650 ±2% 1.40 100 1.0 -40 to 125

NCP15XQ681p03RC 680ohm 3650 ±3% 1.20 100 1.0 -40 to 125

NCP15XQ102p03RC 1.0k ohm 3650 ±2% 1.00 100 1.0 -40 to 125

NCP15XW152p03RC 1.5k ohm 3950 ±3% 0.81 100 1.0 -40 to 125

NCP15XW222p03RC 2.2k ohm 3950 ±3% 0.67 100 1.0 -40 to 125

NCP15XW332p03RC 3.3k ohm 3950 ±3% 0.55 100 1.0 -40 to 125

NCP15XM472p03RC 4.7k ohm 3500 ±2% 0.46 100 1.0 -40 to 125

NCP15XW682p03RC 6.8k ohm 3950 ±3% 0.38 100 1.0 -40 to 125

NCP15XH103p03RC 10k ohm 3380 ±1% 0.31 100 1.0 -40 to 125

NCP15XV103p03RC 10k ohm 3900 ±3% 0.31 100 1.0 -40 to 125

NCP15XW153p03RC 15k ohm 3950 ±3% 0.25 100 1.0 -40 to 125

NCP15XW223p03RC 22k ohm 3950 ±3% 0.21 100 1.0 -40 to 125

NCP15WL223p03RC 22k ohm 4485 ±1% 0.21 100 1.0 -40 to 125

NCP15WB333p03RC 33k ohm 4050 ±3% 0.17 100 1.0 -40 to 125

Continued on the following page.


!Note R44E9.pdf 05.4.13

9

2



(25°C)


(K)


(mA)


(mW)


(mW/°C)


(°C)

Continued from the preceding page.

NCP15WL333p03RC 33k ohm 4485 ±1% 0.17 100 1.0 -40 to 125

NCP15WB473p03RC 47k ohm 4050 ±1% 0.14 100 1.0 -40 to 125

NCP15WL473p03RC 47k ohm 4485 ±1% 0.14 100 1.0 -40 to 125

NCP15WD683p03RC 68k ohm 4150 ±3% 0.12 100 1.0 -40 to 125

NCP15WL683p03RC 68k ohm 4485 ±1% 0.12 100 1.0 -40 to 125

NCP15WF104p03RC 100k ohm 4250 ±1% 0.10 100 1.0 -40 to 125

NCP15WL104p03RC 100k ohm 4485 ±1% 0.10 100 1.0 -40 to 125

NCP15WM154p03RC 150k ohm 4500 ±3% 0.08 100 1.0 -40 to 125

NCP15WL154p03RC 154k ohm 4485 ±1% 0.08 100 1.0 -40 to 125

NCP15WM224p03RC 220k ohm 4500 ±3% 0.06 100 1.0 -40 to 125

NCP15WM474p03RC 470k ohm 4500 ±3% 0.04 100 1.0 -40 to 125


Tolerance ±1% is also available for the following type.

10k ohm: NCP15XH103F03RC

47k ohm: NCP15WB473F03RC

100k ohm: NCP15WF104F03RC


Chip

a

a b c

c

b

Land

Solder Resist

Soldering Methods

Reflow Soldering

(in mm)

0.4 0.50.4−0.5


!Note R44E9.pdf 05.4.13

10

3




Features1. Excellent solderability and high stability in environment2. Excellent long time aging stability3. High accuracy in resistance and B-constant4. Flow/Reflow soldering possible5. Same B-constant in the same resistance in the three sizes (0805/0603/0402) Easy to use smaller size in the circuits6. Lead is not contained in the product7. NCP15/18/21 series are recognized by UL (UL1434, File No. E137188 Vol. 2, Sec. 2)



0.2—0.6 0.2—0.61.6±0.15

(in mm)

0.8±

0.15

0.8±

0.15


(25°C)


(K)


(mA)


(mW)


(mW/°C)


(°C)

NCP18XF101p03RB 100ohm 3250 ±3% 3.10 100 1.0 -40 to 125

NCP18XF151p03RB 150ohm 3250 ±3% 2.50 100 1.0 -40 to 125

NCP18XM221p03RB 220ohm 3500 ±3% 2.10 100 1.0 -40 to 125

NCP18XM331p03RB 330ohm 3500 ±3% 1.70 100 1.0 -40 to 125

NCP18XQ471p03RB 470ohm 3650 ±2% 1.40 100 1.0 -40 to 125

NCP18XQ681p03RB 680ohm 3650 ±3% 1.20 100 1.0 -40 to 125

NCP18XQ102p03RB 1.0k ohm 3650 ±2% 1.00 100 1.0 -40 to 125

NCP18XW152p03RB 1.5k ohm 3950 ±3% 0.81 100 1.0 -40 to 125

NCP18XW222p03RB 2.2k ohm 3950 ±3% 0.67 100 1.0 -40 to 125

NCP18XW332p03RB 3.3k ohm 3950 ±3% 0.55 100 1.0 -40 to 125

NCP18XM472p03RB 4.7k ohm 3500 ±2% 0.46 100 1.0 -40 to 125

NCP18XW682p03RB 6.8k ohm 3950 ±3% 0.38 100 1.0 -40 to 125

NCP18XH103p03RB 10k ohm 3380 ±1% 0.31 100 1.0 -40 to 125

NCP18XW153p03RB 15k ohm 3950 ±3% 0.25 100 1.0 -40 to 125

NCP18XW223p03RB 22k ohm 3950 ±3% 0.21 100 1.0 -40 to 125

NCP18WB333p03RB 33k ohm 4050 ±3% 0.17 100 1.0 -40 to 125

NCP18WB473p03RB 47k ohm 4050 ±2% 0.14 100 1.0 -40 to 125

NCP18WD683p03RB 68k ohm 4150 ±3% 0.12 100 1.0 -40 to 125

NCP18WF104p03RB 100k ohm 4250 ±2% 0.10 100 1.0 -40 to 125

NCP18WM154p03RB 150k ohm 4500 ±3% 0.08 100 1.0 -40 to 125

NCP18WM224p03RB 220k ohm 4500 ±3% 0.06 100 1.0 -40 to 125

NCP18WM474p03RB 470k ohm 4500 ±3% 0.04 100 1.0 -40 to 125


Tolerance ±1% NCP18XH103F03RB is also availalbe for 10k ohm type.


!Note R44E9.pdf 05.4.13

11

3



Chip LandSolder Resist

b a

c

Soldering Methods a b c

Flow Soldering

Reflow Soldering

0.6-1.0

0.6-0.8

0.8-0.9

0.6-0.7

0.6-0.8

0.6-0.8

(in mm)


!Note R44E9.pdf 05.4.13

12

4




Features1. Excellent solderability and high stability in environment2. Excellent long time aging stability3. High accuracy in resistance and B-constant4. Flow/Reflow soldering possible5. Same B-constant in the same resistance in the three sizes (0805/0603/0402) Easy to use smaller size in the circuits6. Lead is not contained in the product7. NCP15/18/21 series are recognized by UL (UL1434, File No. E137188 Vol. 2, Sec. 2)


2.0±0.2

0.2—0.7 0.2—0.7


1.25

±0.2

0.85

±0.1

5

(in mm)


(25°C)


(K)


(mA)


(mW)


(mW/°C)


(°C)

NCP21XM221p03RA 220ohm 3500 ±3% 3.00 200 2.0 -40 to 125

NCP21XQ471p03RA 470ohm 3650 ±3% 2.00 200 2.0 -40 to 125

NCP21XQ102p03RA 1.0k ohm 3650 ±3% 1.40 200 2.0 -40 to 125

NCP21XW222p03RA 2.2k ohm 3950 ±3% 0.90 200 2.0 -40 to 125

NCP21XM472p03RA 4.7k ohm 3500 ±3% 0.65 200 2.0 -40 to 125

NCP21XV103p03RA 10k ohm 3900 ±3% 0.44 200 2.0 -40 to 125

NCP21XW153p03RA 15k ohm 3950 ±3% 0.36 200 2.0 -40 to 125

NCP21XW223p03RA 22k ohm 3950 ±3% 0.30 200 2.0 -40 to 125

NCP21WB333p03RA 33k ohm 4050 ±3% 0.24 200 2.0 -40 to 125

NCP21WB473p03RA 47k ohm 4050 ±3% 0.20 200 2.0 -40 to 125

NCP21WF104p03RA 100k ohm 4250 ±3% 0.14 200 2.0 -40 to 125



!Note R44E9.pdf 05.4.13

13

4



Chip LandSolder Resist

b a

c

Soldering Methods a b c

Flow Soldering

Reflow Soldering

1.0-1.1

1.0-1.1

0.9-1.0

0.6-0.7

1.0-1.2

1.0-1.2

(in mm)


!Note R44E9.pdf 05.4.13

Y40Y35Y30Y25Y20Y15Y10Y505

101520253035404550556065707580859095100105110115120125

127.366101.66281.72666.14853.94644.27336.49430.26225.22621.15017.82815.10312.85911.0009.4528.1627.0776.1615.3894.7314.1683.6873.2732.9152.6052.3352.1001.8941.7131.5541.4121.2871.1761.077

NCPppYS110

Resistance (Ω)Temp. (°C)B-ConstantResistance

Part Number

254.732203.325163.452132.296107.89388.54672.98760.52350.45142.30035.65730.20525.71922.00018.90416.32314.15512.32310.7789.4618.3367.3746.5455.8305.2104.6714.2013.7893.4273.1072.8252.5742.3522.153

NCPppYS220

Resistance (Ω)355.823273.975213.003166.943131.997105.31884.67068.62855.98145.85937.81931.39626.21122.00018.56015.73513.40311.4629.8428.4887.3486.3995.5954.8964.2993.7953.3602.9832.6562.3672.1161.9011.7121.543

NCPppXC220

Resistance (Ω)382.098304.987245.178198.444161.839132.819109.48190.78575.67763.44953.48545.30838.57833.00028.35624.48521.23218.48416.16714.19212.50411.0619.8178.7447.8147.0066.3015.6835.1404.6614.2373.8623.5283.230

NCPppYS330

Resistance (Ω)533.734410.962319.504250.415197.996157.978127.005102.94283.97268.78956.72847.09439.31733.00027.84023.60320.10417.19314.76312.73211.0229.5988.3927.3456.4485.6925.0404.4743.9833.5513.1732.8512.5682.314

NCPppXC330

Resistance (Ω)544.201434.376349.193282.633230.498189.167155.927129.299107.78290.36776.17664.52954.94447.00040.38634.87230.23926.32623.02520.21317.80915.75313.98212.45411.1309.9798.9748.0947.3206.6386.0355.5005.0244.600

NCPppYS470

Resistance (Ω)760.166585.310455.051356.652281.994224.998180.886146.614119.59697.97280.79467.07355.99747.00039.65133.61628.63324.48721.02618.13315.69813.67011.95210.4619.1848.1077.1796.3735.6735.0574.5204.0603.6573.296

NCPppXC470

Resistance (Ω)787.354628.459505.215408.915333.487273.688225.597187.071155.940130.744110.21293.36179.49468.00058.43050.45443.75038.08933.31329.24425.76622.79220.23018.01916.10214.43712.98411.71010.5919.6048.7317.9577.2696.655

NCPppYS680

Resistance (Ω)

1

Y40Y35Y30Y25Y20Y15Y10Y505

101520253035404550556065707580859095100105110115120125

1157.874924.204742.963601.346490.422402.482331.760275.105229.324192.270162.076137.296116.902100.00085.92774.19764.33956.01348.98943.00637.89133.51729.75026.49823.68021.23119.09417.22115.57514.12412.84011.70210.6909.787

NCPppYS101

Resistance (Ω)1824.1751390.6851070.653831.138650.960514.441409.700328.877265.759215.785176.395145.161120.152100.00083.66970.36159.45650.47043.02936.83031.64927.36423.75620.65118.01115.80013.90812.26310.8449.6228.5637.6486.8506.162

NCPppXF101

Resistance (Ω)2736.2622086.0281605.9791246.708976.440771.661614.550493.315398.639323.677264.592217.742180.228150.000125.503105.54189.18475.70564.54355.24647.47341.04535.63430.97627.01623.70020.86218.39416.26514.43412.84411.47210.2759.243

NCPppXF151

Resistance (Ω)4947.9043703.7552798.8732135.8871645.0371278.0341000.620789.612627.752502.474405.010328.480268.044220.000181.576150.668125.681105.33688.71775.05963.77754.41546.63140.11534.63730.01326.11022.79019.95717.54115.45313.66312.11410.778

NCPppXM221

Resistance (Ω)7421.8565555.6324198.3093203.8312467.5551917.0511500.9301184.418941.628753.711607.514492.720402.066330.000272.365226.002188.521158.004133.076112.58895.66681.62269.94660.17251.95545.01939.16534.18629.93526.31223.18020.49418.17116.168

NCPppXM331

Resistance (Ω)11822.4738767.7456570.2244971.7843796.9332923.4002269.5991775.2251399.0501110.220887.257713.463577.375470.000384.800316.757262.177218.069182.297153.150129.249109.55193.28179.75068.44658.99651.03644.33238.64033.79029.66426.12323.09120.472

NCPppXQ471

Resistance (Ω)17104.85412685.2489505.8557193.2195493.4364229.5993283.6752568.4112024.1581606.2751283.6911032.245835.351680.000556.733458.287379.320315.504263.749221.579186.998158.499134.960115.38399.02985.35673.83964.14055.90548.88842.91837.79533.40929.618

NCPppXQ681

Resistance (Ω)


1099.815846.832658.372516.007407.991325.529261.707212.123173.033141.747116.89497.04281.01668.00057.36848.63641.42635.42830.42126.23522.71219.77817.29315.13413.28811.72910.3869.2208.2087.3176.5395.8745.2914.768

NCPppXC680

Resistance (Ω)

2750K 2750K 3100K 2750K 3100K 2750K 3100K 2750K

2750K 3250K 3250K 3500K 3500K 3650K 3650K3100K

11Ω 22Ω 22Ω 33Ω 33Ω 47Ω 47Ω 68Ω

100Ω 100Ω 150Ω 220Ω 330Ω 470Ω 680Ω68Ω

Temp. (°C)B-ConstantResistance

Part Number

for Temperature Compensation Temperature Characteristics (Center Value)

14

4

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R44E9.pdf 05.4.13

2


Y40Y35Y30Y25Y20Y15Y10Y505

101520253035404550556065707580859095100105110115120125

75.96154.52039.60729.10321.60116.19812.2649.3707.2195.6094.3913.4632.7512.2001.7711.4341.1690.9580.7890.6540.5450.4560.3830.3240.2750.2340.2000.1720.1490.1290.1120.0980.0850.075

NCPppXW222

Resistance (kΩ)113.94181.77959.41143.65432.40124.29718.39614.05510.8298.4146.5865.1954.1263.3002.6562.1521.7531.4371.1840.9810.8170.6840.5750.4860.4120.3510.3010.2580.2230.1930.1680.1460.1280.113

NCPppXW332 NCPppXM472

Resistance (kΩ)105.70579.12659.79445.63035.14427.30321.37716.86913.41110.7358.6537.0185.7264.7003.8793.2192.6852.2501.8951.6041.3631.1630.9960.8570.7400.6410.5580.4870.4260.3750.3300.2920.2590.230

Resistance (kΩ)133.122100.81077.11359.56646.41936.49428.91323.05218.51214.97712.1919.9798.2156.8005.6544.7243.9673.3432.8292.4032.0491.7581.5141.3081.1340.9870.8620.7540.6620.5830.5150.4560.4050.361

NCPppXH682

Resistance (kΩ)234.787168.515122.42289.95366.76650.06637.90628.96322.31317.33813.57110.7058.5036.8005.4744.4343.6132.9612.4402.0221.6831.4091.1851.0010.8490.7240.6200.5320.4590.3980.3460.3020.2640.232

NCPppXW682

Resistance (kΩ)195.652148.171113.34787.55968.23753.65042.50633.89227.21922.02117.92614.67412.08110.0008.3156.9485.8344.9174.1613.5353.0142.5862.2281.9251.6691.4521.2681.1100.9740.8580.7580.6720.5960.531

NCPppXH103

NCPppXV103

Resistance (kΩ)

328.996237.387173.185127.77395.32771.74654.56441.81332.33025.19419.78515.65112.46810.0008.0726.5565.3564.4013.6353.0192.5212.1151.7811.5091.2841.0970.9410.8100.7010.6080.5300.4630.4060.358

Resistance (kΩ)293.651222.375170.103131.395102.39480.50163.77850.85140.83633.03726.89122.01218.12215.00012.47110.4218.7507.3746.2405.3014.5203.8783.3402.8862.5022.1771.9011.6641.4601.2861.1361.0070.8940.796

NCPppXH153

Resistance (kΩ)Y40Y35Y30Y25Y20Y15Y10Y505

101520253035404550556065707580859095100105110115120125

430.688326.150249.484192.712150.178118.06893.54074.58159.89348.45439.44132.28426.57822.00018.29115.28412.83310.8169.1527.7756.6305.6884.8994.2333.6693.1942.7882.4402.1411.8871.6671.4771.3111.168

NCPppXH223 NCPppXW223

Resistance (kΩ)759.605545.196396.070291.025216.008161.977122.63893.70272.19156.09343.90734.63327.50922.00017.70914.34411.6889.5787.8946.5405.4464.5593.8323.2392.7482.3422.0041.7221.4861.2871.1190.9750.8540.750

Resistance (kΩ)1073.436753.900535.073383.590277.643202.813149.462111.08283.23362.85847.83136.66428.30422.00017.21413.55710.7448.5666.8715.5434.4973.6693.0092.4812.0561.7131.4341.2061.0190.8660.7390.6330.5450.471

NCPppWL223

Resistance (kΩ)1227.263874.449630.851460.457339.797253.363190.766144.964111.08785.84266.86152.47041.47133.00026.43021.29817.26614.07611.5389.5067.8706.5495.4754.5953.8743.2822.7892.3792.0381.7511.5091.3061.1340.987

NCPppWB333

Resistance (kΩ)1451.0491019.238725.084522.021379.842279.371207.566155.639117.81489.92569.20453.67541.93733.00026.14320.84516.72313.49810.9548.9407.3346.0465.0114.1703.4872.9282.4692.0911.7771.5161.2981.1160.9620.832

NCPppWF333

Resistance (kΩ)517.912371.724270.048198.426147.278110.43983.61763.88849.22138.24529.93623.61318.75615.00012.0749.7807.9696.5315.3824.4593.7133.1082.6132.2081.8731.5971.3671.1741.0130.8780.7630.6650.5820.511

NCPppXW153

Resistance (kΩ)


25.15418.65513.97910.5788.0796.2204.8293.7772.9772.3621.8881.5181.2291.0000.8190.6740.5580.4640.3880.3260.2750.2330.1990.1700.1460.1260.1090.0940.0820.0720.0630.0560.0490.044

NCPppXQ102

Resistance (kΩ)51.79137.17227.00519.84314.72811.0448.3626.3894.9223.8252.9942.3611.8761.5001.2070.9780.7970.6530.5380.4460.3710.3110.2610.2210.1870.1600.1370.1170.1010.0880.0760.0670.0580.051

NCPppXW152

Resistance (kΩ)3950K 3950K 3500K 3380K 3950K 3380K

3900K 3380K 3380K 3950K 4485K 4050K 4250K3950K

3650K 3950K2.2kΩ 3.3kΩ 4.7kΩ 6.8kΩ 6.8kΩ 10kΩ

10kΩ 15kΩ 22kΩ 22kΩ 22kΩ 33kΩ 33kΩ15kΩ

1kΩ 1.5kΩ


Part Number


Part Number


15

4


!Note R44E9.pdf 05.4.13

3


Y40Y35Y30Y25Y20Y15Y10Y505

101520253035404550556065707580859095100105110115120125

2990.0412100.2471494.1131075.679782.705575.674427.712320.710242.768185.300142.603110.60286.41568.00053.87142.95434.46027.81422.57218.42215.11312.45910.3258.5927.1856.0335.0874.3093.6613.1242.6752.2991.9831.715

NCPppWF683

Resistance (kΩ)3317.8932330.2371653.8621185.641858.168626.875461.974343.345257.266194.287147.841113.32587.48468.00053.20841.90333.20826.47721.23717.13313.90011.3399.3007.6686.3565.2944.4323.7283.1512.6762.2831.9561.6841.456

NCPppWL683 NCPppWF104

Resistance (kΩ)4397.1193088.5992197.2251581.8811151.037846.579628.988471.632357.012272.500209.710162.651127.080100.00079.22263.16750.67740.90433.19527.09122.22418.32315.18412.63510.5668.8737.4816.3375.3844.5943.9343.3802.9162.522

Resistance (kΩ)4879.2543426.8182432.1491743.5901262.012921.875679.373504.919378.333285.717217.414166.654128.653100.00078.24761.62248.83538.93731.23125.19520.44116.67513.67711.2779.3467.7856.5175.4824.6343.9353.3572.8772.4762.141

NCPppWL104

Resistance (kΩ)

Y40Y35Y30Y25Y20Y15Y10Y505

101520253035404550556065707580859095100105110115120125

7318.8815140.2283648.2242615.3851893.0181382.8131019.059757.379567.499428.575326.121249.981192.979150.000117.37092.43373.25258.40646.84637.79330.66125.01320.51616.91614.01911.6789.7768.2236.9515.9025.0354.3153.7143.211

NCPppWL154

Resistance (kΩ)7899.4665466.1183834.4992720.5231951.2161415.5651036.984767.079572.667431.264327.405250.538193.166150.000117.28192.29373.09058.24046.66537.60530.45324.80420.29316.67913.77611.4289.5207.9666.6885.6394.7724.0523.4542.955

NCPppWM154 NCPppWL224

Resistance (kΩ)10734.3587539.0015350.7293835.8982776.4272028.1261494.6201110.822832.332628.577478.310366.639283.036220.000172.143135.569107.43685.66268.70855.42944.97036.68630.09024.81020.56217.12814.33812.06110.1948.6577.3856.3295.4484.710

Resistance (kΩ)11585.8848016.9735623.9313990.1002861.7842076.1621520.9091125.049839.912632.521480.194367.455283.310220.000172.012135.364107.19885.41968.44155.15344.66536.37929.76324.46220.20516.76113.96211.6849.8098.2706.9985.9425.0674.334

NCPppWM224

Resistance (kΩ)24751.66117127.16912014.7628524.3056113.8114435.4373249.2162403.5151794.3581351.2941025.870785.018605.252470.000367.480289.186229.014182.485146.215117.82895.42077.71863.58452.26043.16635.80829.82824.96120.95517.66814.95112.69510.8249.259

NCPppWM474

Resistance (kΩ)

1610.1541130.850802.609575.385416.464304.219224.193166.623124.85094.28771.74754.99642.45533.00025.82220.33516.11512.84910.3068.3146.7465.5034.5133.7213.0842.5692.1511.8091.5291.2991.1080.9490.8170.707

NCPppWL333

Resistance (kΩ)1747.9201245.428898.485655.802483.954360.850271.697206.463158.214122.25995.22774.73059.06547.00037.64330.33424.59120.04816.43313.53911.2099.3287.7986.5445.5184.6743.9723.3882.9022.4942.1501.8601.6151.406

NCPppWB473

Resistance (kΩ)2293.2491610.6051143.110819.487593.146433.281319.305237.312177.816134.287102.18478.32760.46747.00036.77628.96222.95218.30114.67911.8429.6077.8376.4285.3004.3933.6593.0632.5772.1781.8491.5781.3521.1641.006

NCPppWL473

Resistance (kΩ)2735.3591937.3911389.3451008.014738.978547.456409.600309.217235.606180.980140.139109.34485.92968.00054.16743.42135.01628.40623.16618.99715.65712.96710.7949.0217.5756.3875.4074.5983.9223.3592.8872.4892.1551.870

NCPppWD683

Resistance (kΩ)4250K 4485K 4250K∗ 4485K

4485K 4500K 4485K 4500K 4500K

4485K 4050K 4485K 4150K68kΩ 68kΩ 100kΩ 100kΩ

150kΩ 150kΩ 220kΩ 220kΩ 470kΩ

33kΩ 47kΩ 47kΩ 68kΩ


Part Number


Part Number

∗ B-Constant of NCP18WF104F type is 4200K. Please contact us for the detail data.


16

4


!Note R44E9.pdf 05.4.13

Chip Type !Caution/Notice

17

4


!Caution (Storage and Operating Conditions)This product is designed for application in an ordinary environment (normal room temperature, humidity and atmospheric pressure). Do not use under the following conditions because all these factors can deteriorate the product characteristics or cause failures and burn-out.1. Corrosive gas or deoxidizing gas (Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.)

2. Volatile or flammable gas3. Dusty conditions4. Under high or low pressure5. Wet or humid locations6. Places with salt water, oils, chemical liquids or organic solvents7. Strong vibrations8. Other places where similar hazardous conditions exist

!Caution (Others)Be sure to provide an appropriate fail-safe function on your product to prevent secondary damages that may be caused by the abnormal function or the failure of our product.

Notice (Storage and Operating Conditions)To keep solderability of product from declining, the following storage condition is recommended.1. Storage condition: Temperature -10 to +40 degree C Humidity less than 75%RH (not dewing condition)2. Storage term: Use this product within 6 months after delivery by first-in and first-out stocking system.

3. Handling after unpacking: After unpacking, reseal product promptly or store it in a sealed container with a drying agent.4. Storage place: Do not store this product in corrosive gas (sulfuric acid gas, chlorine gas, etc.) or in direct sunlight.

Notice (Rating)Use this product within the specified temperature range.Higher temperature may cause deterioration of the characteristics or the material quality of this product.

Notice (Handling)The ceramic of this product is fragile, and care must be taken not to load a excessive press-force or not to give a shock at handling. Such forces may cause cracking or chipping.


!Note R44E9.pdf 05.4.13

Allowable Reflow Soldering Temperature and Time Standard Soldering Conditions

Allowable Reflow Soldering Temperature and Time Standard Soldering Conditions

Locate this product horizontal to the direction in which stress acts.

Keep this product on the PC Board away from the Separation Line. Worst ← A-C-B-D → Better

[Component Direction]

[Mounting Close to Board Separation Line]

A

B

D

CPerforationHoles

Slit

1. Mounting Position

2. Reflow Soldering Conditions (NCP03/NCP15 Series)

(NCP18/NCP21 Series)

3. Flow Soldering Conditions (NCP18/NCP21 Series)

Choose a mounting position that minimizes the stress imposed on the chip during flexing or bending of the board.


Allowable Flow Soldering Temperature and Time Standard Soldering Conditions

Time (sec.)

Tem

pera

ture

(°C

)

Tem

pera

ture

(°C

)

280

270

260

250

240

230

220

2100 10 20 30

Preheating (in air) SolderingGradual Cooling

(in air)300

200

100

01-2 min. 10sec. max.

Preheating : 160±10°C, 1-2 min.Soldering : 230-260°C, 10sec. max.

Time (sec.)

Tem

pera

ture

(°C

)

280

270

260

250

240

230

220

2100 1109020 30 40 50 60 70 1008010

Tem

pera

ture

(°C

)

Preheating (in air) SolderingGradual Cooling

(in air)300

200

100



Time (sec.)

Tem

pera

ture

(°C

)

280

270

260

250

240

230

2200 9020 30 40 50 60 70 8010

Tem

pera

ture

(°C

)Preheating (in air) Soldering

Gradual Cooling(in air)300

200

100



1

Notice (Soldering and Mounting)


18

4

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

!Note R44E9.pdf 05.4.13

For removing the flux after soldering, observe the following points in order to avoid deterioration of the characteristics or any change of the external electrodes' quality.

Thin or insufficient adhesive may result in loose component contact with land during flow soldering.Low viscosity adhesive causes chips to slip after mounting.

(1) Solder and Paste(a) Reflow Soldering : NCP03/15/18/21 Series

Use RA/RMA type or equivalent type of solder paste. For your reference, we are using the solder paste below for any internal tests of this product.•RMA9086 90-4-M20 (Sn:Pb=63wt%:37wt%)(Manufactured by Alpha Metals Japan Ltd.)•M705-221BM5-42-11 (Sn:Ag:Cu=96.5wt%:3.0wt%:0.5wt%)(Manufactured by Senju Metal Industry Co., Ltd.)

(b) Flow Soldering : NCP18/21 SeriesWe are using the solder paste below. For any internal tests of this product.•Sn : Pb=63wt%:37wt%•Sn : Ag : Cu=96.5wt% : 3.0wt% : 0.5wt%

(2) FluxUse Rosin-based flux.Do not use strong acidic flux (with halide content exceeding 0.2wt%)

NCP03/15 NCP18/21

NCP03

NCP15

NCP18/NCP21

100µm

100µm

150µm

1/3EVTVE

1/3EVTVE

0.2mmVTVE

Part Number The solder paste thickness T

Reference: Optimum Solder Amount

TE

Electrode

Solder Solder


4. Solder and Flux

5. Cleaning Conditions

After cleaning, promptly dry this product.6. Drying

The amount of solder is critical. Standard height of fillet is shown in the table below.Too much soldering may cause mechanical stress, resulting in cracking, mechanical and/or electronic damage.

7. Printing Conditions of Solder Paste

8. Adhesive Application and Curing

Isopropyl Alcohol

Less than 5min. at room

temp. or less than 2min.

at 40°C max.

Less than 5min. 20W/r

Frequency of 28 to

40kHz.

Isopropyl Alcohol

Less than 5min. at room

temp. or less than 2min.

at 40°C max.

Less than 1min. 20W/r

Frequency of several

10kHz to 100kHz.

Solvent

Dipping Cleaning

Ultrasonic Cleaning

2


19

4


!Note R44E9.pdf 05.4.13

NCP03

NCP15

NCP18

NCP21

15000

10000

4000

-

-

4000

Part NumberPaper Tape

Quantity (pcs.)

Plastic Tape

(in mm)

(in mm)

40 min.190-250

Vacant Section

210-250

Top Tape aloneCover Tape alone

Leader Unit

Trailer Unit

Chip-mounting Unit

Direction of Feed

ø180

ø21.0±0.8

ø13.0±0.2

ø60

2.0±0.5

9.013.0±1.0

(1) A tape in a reel contains Leader unit and Trailer unit where

products are not packed. (Please refer to the figure right.)

(2) The top and base tapes or, plastic and cover tape are not

stuck at the first five pitches minimum.

(3) A label should be attached on the reel. (MURATA's part

number, inspection number and quantity should be marked

on the label.)

(4) Taping reels are packed in a package.

1. Dimensions of Reel

2. Taping Method

Tape Carrier Packaging

Minimum Quantity Guide


W0Y1.5

W1.0Y0

W1.

0Y

0

1

Chip Type Package

20

4


!Note R44E9.pdf 05.4.13

(1) Other Conditions

(a) Packaging

Products are packaged in the cavity of the base tape and

sealed by top tape and bottom tape.

(b) Tape

Top tape and bottom tape have no joints and products

are packaged and sealed in the cavity of the base tape,

continuously.

(2) Peeling force of top tape

(3) Pull Strength

Pull strength of top tape is specified at 10N minimum.

Pull strength of bottom tape are specified 5N minimum.

3. Paper Tape (NCP03/15/18 Series)

NCP15 Series8mm width 2mm pitch Tape

NCP18 Series8mm width 4mm pitch Tape

1.1 max4.0±0.1 4.0±0.12.0±0.05

ø1.5+0.1/–0

1.75

±0.1

3.5±

0.05

8.0±

0.3

Direction of Feed

1.05∗

0.8 max.4.0±0.12.0±0.05

ø1.5+0.1/–0 1.75

±0.1

3.5±

0.05

1.15

∗

8.0±

0.3

Direction of Feed

0.65∗

(in mm)

∗ Reference Value∗ Reference Value

∗ Reference Value

165-180 ° F

∗ 1 Peeling angle : 165 to 180 degree against the fixed surface of tape.

∗ 2 Peeling speed : 300mm/min.

∗ 3 Peeling force : 0.1 - 0.6N



1.85

∗

NCP03 Series

0.5 max4.0±0.12.0±0.05

ø1.5+0.1/–0 1.75

±0.1

3.5±

0.05

0.68

∗

8.0±

0.3

Direction of Feed

0.38∗

2

Chip Type Package

21

4


!Note R44E9.pdf 05.4.13

∗ 1 Peeling angle : 165 to 180 degree against the fixed surface of tape.

∗ 2 Peeling speed : 300mm/min.

∗ 3 Peeling force : 0.1 - 0.7N

F165-180 °


(2) Peeling force of cover tape

(3) Tape Strength

Pull strength of plastic tape and cover tape shall be specified

10N minimum.

(1) Other Conditions

(a) Packaging

Products are packaged in the each embossed cavity of

plastic tape and sealed by cover tape.

(b) Tape

Cover tape has no joints.

4. Plastic Tape (NCP21 Series)

1.050.2

4.0±0.12.0±0.05

4.0±0.1 φ1.5

1.75

±0.1

φ1.0 1.45∗ ∗ Reference Value

3.5±

0.05

8.0±

0.3

Direction of Feed

2.25

∗

(in mm)

+0.3-0

+0.1-1

3

Chip Type Package

22

4


!Note R44E9.pdf 05.4.13

23

5


NTC Thermistorsfor Temperature Sensor Lead Type

This product is a sensor type NTC Thermistor to be useful in the normal temperature range developed by the unique ceramic technology and the automatic assembly.

Features1. High-accuracy of +-1% +-1% of resistance and B-Constant tolerance is realized due to uniform thickness by the precise sheet forming method.2. Quick response This product provides faster response time due to its smaller size.3. Taping type is available (Standard type).4. Strong lead strength Original lead-wiring technique assures reliable connection. It can be formed and bent flexibly according to the mounting conditions.

Applications1. Rechargeable batteries2. Battery charging circuits3. Head of printers4. DC fan motors5. Home appliance equipments

Solder Plated Copper Ply Wireø0.4±0.03

31±1

2.5±1.0

6.0

max

.

3.0 max. (∗3.3 max.) 1.8 max. (∗2.5 max.)

Epoxy Resin

(in mm)

∗ It applies to NTSA0XM202, NTSA0WB203 and NTSA0WC303 Type.


(25°C)(k ohm)


(K)


(mA)


(mW)


(mW/°C)

Thermal TimeConstant(25°C)(s)


(°C)

NTSA0XM202pE1B0 2.0 3500 ±1% 1.05 21 2.1 7 -40 to 125

NTSA0XR502pE1B0 5.0 3700 ±1% 0.68 21 2.1 7 -40 to 125

NTSA0XH103pE1B0 10 3380 ±1% 0.38 15 1.5 7 -40 to 125

NTSA0XV103pE1B0 10 3900 ±1% 0.46 21 2.1 7 -40 to 125

NTSA0WB203pE1B0 20 4050 ±1% 0.31 21 2.1 7 -40 to 125

NTSA0WC303pE1B0 30 4100 ±1% 0.26 21 2.1 7 -40 to 125

NTSA0WD503pE1B0 50 4150 ±1% 0.20 21 2.1 7 -40 to 125

NTSA0WF104pE1B0 100 4250 ±1% 0.14 21 2.1 7 -40 to 125

A blank column is filled with resistance tolerance codes. (F: ±1%, E: ±3%)

Taping type of part numbers with "N6A0" is available. (Lead spacing=5mm)

Temperature Tolerance-Temperature CharacteristicsResistance Tolerance +/-1% Type

Tem

pera

ture

Tol

eran

ce [±

˚C]

-40 125Temperature [˚C]

0 50 100

1.0

2.0

3.0


!Note R44E9.pdf 05.4.13

24

6


NTC Thermistorsfor Temperature Sensor Lead Insulation Type

This product is a sensor type NTC Thermistor to be useful in the normal temperature range developed by the unique ceramic technology and the automatic assembly.

Features1. Electric insulation on lead wire2. Excellent bending resistance due to suitable hardness of surface coating3. Easy handling due to most suitable hardness of surface of coating4. High-accuracy of +-1% +-1% of resistance and B-Constant tolerance are realized due to uniform thickness by the precise sheet forming method.

Applications1. Rechargeable batteries2. Battery charging circuits3. Head of printers4. DC fan motors5. Home appliance equipments

3.0 max. (∗3.8 max.)

0.60-0.952.5

+1.5−0.5

2.0 max. (∗2.5 max.)

ø0.4±0.03

(Solder PlatedCopper Ply Wire)

(in mm)

5±1

27.0

±2.0

3±1.

5

(Coa

ting

Are

a)

∗ It applies to NTSD0XM202, NTSD0WB203 and NTSD0WC303 Type.

NTSD0 Series

3.0 max. (∗3.8 max.) 2.0 max. (∗2.5 max.)

ø0.45±0.03Sn-3.5Ag Solder Copper Wire

∗ NTSD1XM202/NTSD1WB203/NTSD1WC303 Type

Epoxy Resin

ø0.46±0.03Polyurethane Wire

(in mm)

L ±2

.0

2.5±

1.2

(0.8)

2.5+1.5-0.5

TypeNTSD1_FPB30

NTSD1_FPB40

NTSD1_FPB50

L (mm)30

40

50

NTSD1 Series

NTSD0 Series


(25°C)(k ohm)


(K)


(mA)


(mW)


(mW/°C)



(°C)

NTSD0XM202pE1B0 2.0 3500 ±1% 1.05 21 2.1 7 -40 to 125

NTSD0XR502pE1B0 5.0 3700 ±1% 0.68 21 2.1 7 -40 to 125

NTSD0XH103pE1B0 10 3380 ±1% 0.38 15 1.5 7 -40 to 125

NTSD0XV103pE1B0 10 3900 ±1% 0.46 21 2.1 7 -40 to 125

NTSD0WB203pE1B0 20 4050 ±1% 0.31 21 2.1 7 -40 to 125

NTSD0WC303pE1B0 30 4100 ±1% 0.26 21 2.1 7 -40 to 125

NTSD0WD503pE1B0 50 4150 ±1% 0.20 21 2.1 7 -40 to 125

NTSD0WF104pE1B0 100 4250 ±1% 0.14 21 2.1 7 -40 to 125

A blank column is filled with resistance tolerance codes. (F: ±1%, E: ±3%)

NTSD1 Series


(25°C)(k ohm)


(K)


(mA)


(mW)


(mW/°C)



(°C)

NTSD1XM202FPBpp 2.0 ±1% 3500 ±1% 1.05 21 2.1 7 -40 to 125

NTSD1XR502FPBpp 5.0 ±1% 3700 ±1% 0.68 21 2.1 7 -40 to 125

NTSD1XH103FPBpp 10 ±1% 3380 ±1% 0.38 15 1.5 7 -40 to 125

NTSD1XV103FPBpp 10 ±1% 3900 ±1% 0.46 21 2.1 7 -40 to 125

NTSD1WB203FPBpp 20 ±1% 4050 ±1% 0.31 21 2.1 7 -40 to 125

NTSD1WC303FPBpp 30 ±1% 4100 ±1% 0.26 21 2.1 7 -40 to 125

NTSD1WD503FPBpp 50 ±1% 4150 ±1% 0.20 21 2.1 7 -40 to 125

NTSD1WF104FPBpp 100 ±1% 4250 ±1% 0.14 21 2.1 7 -40 to 125

A blank column is filled with Total-length codes. (30, 40, 50)

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

!Note R44E9.pdf 05.4.13

25

6


Temperature Tolerance-Temperature CharacteristicsResistance Tolerance +/-1% Type

Tem

pera

ture

Tol

eran

ce [±

˚C]

-40 125Temperature [˚C]

0 50 100

1.0

2.0

3.0


!Note R44E9.pdf 05.4.13

Y40Y35Y30Y25Y20Y15Y10Y505

101520253035404550556065707580859095100105110115120125

44.65733.50525.38819.40214.96111.6449.1337.1985.7164.5713.6822.9872.4372.0001.6511.3711.1430.9580.8070.6830.5820.4970.4260.3670.3180.2760.2400.2100.1830.1610.1420.1250.1110.099

123.48492.29569.61452.86040.48031.27524.33919.15415.14811.9649.5207.6246.1605.0004.0823.3542.7732.2991.9141.6071.3561.1490.9780.8340.7140.6120.5270.4560.3960.3450.3020.2640.2320.205

195.652148.171113.34787.55968.23753.65042.50633.89227.21922.02117.92614.67412.08110.0008.3156.9485.8344.9174.1613.5353.0142.5862.2281.9251.6691.4521.2681.1100.9740.8580.7580.6710.5960.531

347.808248.591179.973131.83297.67973.11955.30142.25732.58225.32419.84715.67912.47810.0008.0686.5525.3534.3993.6353.0202.5212.1151.7831.5101.2841.0960.9390.8080.6980.6050.5270.4600.4030.354

NTSppXM202 NTSppXR502 NTSppXH103 NTSppXV103

Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ)

1

733.007524.831380.184277.845205.260153.642116.01688.12567.52252.16840.61731.84725.15120.00016.01412.90210.4578.5276.9935.7714.7893.9923.3432.8092.3712.0201.7291.4761.2641.0850.9350.8120.7080.617

1149.500819.651591.391430.529316.870236.337177.842134.630102.81679.18361.46048.04537.83430.00023.95519.24915.56012.65710.3548.5257.0585.8694.9054.1133.4632.9452.5162.1431.8321.5711.3501.1711.0190.886

1948.5751387.289999.456728.895537.039399.167299.469226.186172.393132.857103.08980.43063.20150.00039.82531.91825.73320.87717.03413.92911.4399.4857.9066.6145.5584.6863.9673.3732.8782.4652.1181.8281.5831.374

4256.7523005.8882148.5141555.0201137.312839.314625.338469.127355.224272.045209.803162.713127.117100.00079.21563.15050.64940.88533.19527.01422.07918.22615.1242.598

10.5428.8527.4636.3215.3744.5853.9253.3762.9132.520

NTSppWB203 NTSppWC303 NTSppWD503 NTSppWF104

Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ)3500K 3700K 3380K 3900K 4050K 4100K 4150K 4250K2.0kΩ 5.0kΩ 10kΩ 10kΩ 20kΩ 30kΩ 50kΩ 100kΩ


Part Number

for Temperature Sensor Temperature Characteristics (Center Value)

26

6


!Note R44E9.pdf 05.4.13

for Temperature Sensor Lead Type/Lead Insulation Type !Caution/Notice

27

6


!Caution (Storage and Operating Conditions)This product is designed for application in an ordinary environment (normal room temperature, humidity and atmospheric pressure). Do not use under the following conditions because all these factors can deteriorate the product characteristics or cause failures and burn-out.1. Corrosive gas or deoxidizing gas (Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.)

2. Volatile or flammable gas3. Dusty conditions4. Under high or low pressure5. Wet or humid locations6. Places with salt water, oils, chemical liquids or organic solvents7. Strong vibrations8. Other places where similar hazardous conditions exist





Notice (Soldering and Mounting)1. Be sure that the preheat-up does not melt the soldering of this product. Excessive heat may cause failure to open, short or insulation break down.2. Do not touch the body with soldering iron. The soldering point should be min. 5mm away from the root of lead wire.

Notice (Handling)1. The ceramic element of this product is fragile, and care must be taken not to load an excessive press-force or not to give a shock at handling. Such forces may cause cracking or chipping.2. Do not apply an excessive force to the lead. Otherwise, it may cause junction between lead and element to break or crack. Holding element by side lead wire is recommended when lead wire is bent or cut.


!Note R44E9.pdf 05.4.13

for Temperature Sensor Lead Type/Lead Insulation Type NTSA/NTSD Series Package

28

6


Item Code Dimensions (mm)

Pitch of Component

Pitch of Sprocket Hole

Lead Spacing

Lead Length from Hole Center to Component Center

Lead Length from Hole Center to Lead

Body Diameter

Deviation along Tape, Left or Right

Carrier Tape Width

Position of Sprocket Hole

Lead Distance between Reference and Bottom Planes

Height of Component

Overflow of Lead

Diameter of Sprocket Hole

Lead Diameter

Total Tape Thickness

Total Thickness, Tape and Lead Wire

Deviation across Tape

Portion to Cut in Case of Defect

Hole Down Tape Width

Hole Down Tape Position

Coating Extension on Lead

Thickness

P

P0

F

P2

P1

D

∆S

W

W1

H0

H2

I

D0

d

t1

t2

∆h1, ∆h2

L

W0

W2

e

T

12.7

12.7±0.3

5.0+0.8/–0.2

6.35±1.3

3.85±0.8

3.5 max.

0±2.0

18.0±0.5

9.0±0.5

16.0±1.0

4.0 max.

+0.5 to –1.0

4.0±0.1

0.50±0.03

0.6±0.3

1.6 max.

1.0 max.

11.0+0/–2.0

11.0 min.

1.5±1.5

Up to the crimp point

2.6 max.

(in mm)

Minimum Quantity

Taping Dimensions (NTSA Series)

P2

P0I

L

P ∆S

H2

W2

W0

H0W1

W

t2 t1

∆h2 ∆h1

T

øD0

D

P1 ød

F

e

Part NumberAmmo Pack

Minimum Quantity (pcs.)

Bulk

NTSA 3000 100

NTSD - 100


!Note R44E9.pdf 05.4.13

29

7


NTC Thermistorsfor Inrush Current Suppression Lead Type

This product effectively supresses surge currents which are generated when switching power regulators are turned on.

Features1. Lead is not contained in the ceramic element, the terminations, the solder for inner connection and the coating resin.2. Most suitable for power supplies of less than 100W3. Excellent recovery characteristics due to resin coating with excellent heat characteristics4. Highly reliable

Applications1. Switching power supplies2. CRT monitors 3. Color televisions4. VCR-Power supplies 5. Other power circuits

Coating Extensionon Lead : to line A

10.0

max

.3.

5±1.

0

NTPAN : 23.0 max.NTPAJ : 20.0 max. 5.5 max.

10.0±1.5

ø0.8±0.05Sn plated Cu wire

A

(in mm)

NTPAN/NTPAJ Series


10.0

max

.3.

5±1.

0

NTPAD : 16.0 max.NTPAA : 12.0 max.

5.5 max.5.0 max.

7.5±1.5


A

(in mm)

NTPAD/NTPAA Series


6.0

max

.3.

5±1.

0

NTPA7 : 9.0 max.NTPA9 : 11.0 max.

5.0 max.

5.0±1.5


A

(in mm)

NTPA7/NTPA9 Series


(25°C)(ohm)

Permissible Max.Current (25°C)

(A)


(A)

Thermal TimeConstant (25°C)(s)

Thermal DissipationConstant(mW/°C)

PermissibleElectrolytic Capacitor

(µF)

NTPAN3R0LDKB0 3.0 ±15% 5.4 4.7 135 26.8 8600 at 100V

NTPAN4R0LDKB0 4.0 ±15% 4.7 4.1 130 26.8 8600 at 100V

NTPAN6R0LDKB0 6.0 ±15% 3.9 3.4 130 26.8 8600 at 100V

NTPAJ4R0LDKB0 4.0 ±15% 4.0 3.5 125 21.8 5000 at 100V

NTPAJ6R0LDKB0 6.0 ±15% 3.4 2.9 125 21.8 5000 at 100V

NTPAJ8R0LDKB0 8.0 ±15% 3.0 2.6 130 21.8 5000 at 100V

NTPAJ100LDKB0 10.0 ±15% 2.6 2.2 130 21.8 5000 at 100V

NTPAD3R9LDNB0 3.9 ±15% 3.3 2.9 65 18.2 2700 at 100V

NTPAD5R1LDNB0 5.1 ±15% 3.0 2.6 85 18.8 2700 at 100V

NTPAD8R0LDNB0 8.0 ±15% 2.7 2.3 65 18.7 2700 at 100V

NTPAD160LDNB0 16.0 ±15% 2.0 1.7 100 19.1 2700 at 100V

NTPAA2R2LDNB0 2.2 ±15% 3.7 3.2 70 13.5 1400 at 100V



!Note R44E9.pdf 05.4.13

30

7



(25°C)(ohm)


(A)


(A)

Thermal TimeConstant (25°C)(s)

Thermal DissipationConstant(mW/°C)

PermissibleElectrolytic Capacitor

(µF)


NTPAA3R9LDNB0 3.9 ±15% 2.7 2.3 70 13.5 1400 at 100V

NTPAA5R1LDNB0 5.1 ±15% 2.5 2.2 70 13.5 1400 at 100V

NTPAA8R2LDNB0 8.2 ±15% 2.0 1.7 70 13.5 1400 at 100V

NTPAA100LDNB0 10.0 ±15% 1.7 1.5 70 13.5 1400 at 100V

NTPA9160LBMB0 16.0 ±15% 1.4 1.2 65 11.6 800 at 100V

NTPA74R0LBMB0 4.0 ±15% 2.3 2.0 40 9.4 700 at 100V

NTPA78R0LBMB0 8.0 ±15% 1.7 1.5 40 9.5 570 at 100V

NTPA7160LBMB0 16.0 ±15% 1.2 1.0 40 9.9 400 at 100V

NTPA7220LBMB0 22.0 ±15% 1.0 0.88 40 9.1 400 at 100V

NTPAD/NTPAA/NTPA7 series are also availabe on tape.

Application Circuit

NTC

−t˚

−

+

Determination of Allowable Current

Max

. Cur

rent

Rat

io

1.0

0

0.5

Ambient Temperature (˚C)20 40 60 80 100 120 140 160


!Note R44E9.pdf 05.4.13

Current-R Ratio (RT/R25) / Current-Temperature Characteristics (Typical)

31

7


NTPAN3R0L Type

0.01 0.1

Current (A)

Ta=25˚C

1 10

Resistance RatioThermistor's Temperature (˚C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(˚C

)

NTPAN4R0L Type

0.01 0.1

Current (A)

Ta=25˚C

1 10


10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(˚C

)

NTPAN6R0L Type

0.01 0.1

Current (A)

Ta=25˚C

1 10


10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(˚C

)

NTPAJ4R0L Type

0.01 0.1

Current (A)

Ta=25˚C

1 10


10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(˚C

)

NTPAJ6R0L Type

0.01 0.1

Current (A)

Ta=25˚C

1 10


10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(˚C

)

NTPAJ8R0L Type

0.01 0.1

Current (A)

Ta=25˚C

1 10


10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(˚C

)



!Note R44E9.pdf 05.4.13


32

7



NTPAJ100L Type

0.01 0.1

Current (A)

Ta=25˚C

1 10


10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(˚C

)

NTPAD3R9L Type

0.01 0.1

Current (A)

Ta=25˚C

1 10


10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(˚C

)

NTPAD5R1L Type

0.01 0.1

Current (A)

Ta=25˚C

1 10


10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(˚C

)

NTPAD8R0L Type

0.01 0.1

Current (A)

Ta=25˚C

1 10


10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(˚C

)

NTPAD160L Type

0.01 0.1

Current (A)

Ta=25˚C

1 10


10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(˚C

)

NTPAA2R2L Type

0.01 0.1

Current (A)

Ta=25˚C

1 10


10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(˚C

)



!Note R44E9.pdf 05.4.13


33

7



NTPAA3R9L Type

0.01 0.1

Current (A)

Ta=25˚C

1 10


10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(˚C

)

NTPAA5R1L Type

0.01 0.1

Current (A)

Ta=25˚C

1 10


10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(˚C

)

NTPAA8R2L Type

0.01 0.1

Current (A)

Ta=25˚C

1 10


10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(˚C

)

NTPAA100L Type

0.01

0.1

1

10

0.01 0.1 1 10

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

tem

pera

ture

(°C

)

1

10

100

1000

Resistance RatioThermistor's Temperature

Ta=25°C

Current (A)

NTPA9160L Type

0.01

0.1

1

10

0.01 0.1 1 10

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

tem

pera

ture

(°C

)

1

10

100

1000

Resistance RatioThermistor's Temperature

Ta=25°C

Current (A)

NTPA74R0L Type

0.01 0.1

Current (A)

Ta=25˚C

1 10


10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(˚C

)



!Note R44E9.pdf 05.4.13


34

7



NTPA78R0L Type

0.01 0.1

Current (A)

Ta=25˚C

1 10


10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(˚C

)

NTPA7160L Type

0.01 0.1

Current (A)

Ta=25˚C

1 10


10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(˚C

)

NTPA7220L Type

0.01 0.1

Current (A)

Ta=25˚C

1 10


10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(˚C

)


!Note R44E9.pdf 05.4.13

for Inrush Current Suppression Lead Type !Caution/Notice

35

7


!Caution (Storage and Operating Conditions)1. This product is designed for the Switching Power Supply with smoothing capacitors. Other applications of this product may result in fire.2. Use this product within the specified maximum current. Otherwise it may catch fire in the worst case.3. Use this product with smoothing capacitor within the specified maximum capacitance value. Otherwise it may catch fire in the worst case.4. This product is designed for application in an ordinary environment (normal room temperature, humidity and atmospheric pressure). Do not use under the following conditions because

all these factors can deteriorate the product characteristics cause failure and burn-out. (1) Corrosive gas or deoxidizing gas. (Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) (2) Volatile or flammable gas (3) Dusty conditions (4) Under high or low pressure (5) Wet or humid conditions (6) Near with salt water, oils, chemical liquids or organic solvents (7) Strong vibrations (8) Other places where similar hazardous conditions exist.





Notice (Soldering and Mounting)1. Be sure that the preheat-up does not melt the soldering of this product. Excessive heat may cause failure to open, short or insulation break down.2. Do not touch the body with soldering iron. The soldering point should be min. 5mm away from the root of lead wire.


!Note R44E9.pdf 05.4.13

for Inrush Current Suppression Lead Type !Caution/Notice

36

7


Notice (Handling)1. When this product is operated, temperature of some area may be about 160 (degree C). Use proper surrounding parts and material which withstand such temperature. If they are inadequate and kept at high temperature for long time, they may be deteriorated or may produce harmful gas. And, such harmful gas may deteriorate the element of this product.2. This product does not have waterproof construction. Splashed water may cause failure mode such as deterioration of characteristics or current leak. So, do not apply cleaning to immerse it into water or any solvent.

3. The ceramic element of this product is fragile, and care must be taken not to load an excessive press-force or not to give a shock at handling. Such forces may cause cracking or chipping to the element.4. Do not apply an excessive force to the lead wire. Otherwise, it may cause break off junction between lead wire and element, or may crack element. So, fix lead wire of element side when lead wire is bent or cut.

Notice (Others)1. This products need sufficient cool off time to recover high resistance. Repeated ON-OFF may cause over specified current rating. Make sure inrush current do not exceed the specified ratings even at the worst condition. (maximum ambient temperature and the shortest off time.)2. The resin coating of this product does not guarantee insulating. Keep an adequate insulating distance to surrounding parts.


!Note R44E9.pdf 05.4.13

for Inrush Current Suppression Lead Type Package

37

7


Minimum Quantity

Part NumbersMinimum Quantity (pcs.)

BulkAmmo Pack

NTPA7 1000 100

NTPA9 1000 100

NTPAA 750 100

NTPAD 400 100

NTPAJ - 100

NTPAN - 100

Taping Dimensions (NTPAD/NTPAA Series)

Pitch of Component


Lead Spacing

Length from Hole Center to Lead

Length from Hole Center to Component

Body Diameter


Carrier Tape Width



Height of Component

Overflow of Lead


Lead Diameter (Sn-Plated Cu Wire)




Portion to cut in Case of Defect




P

P0

F

P1

P2

D

∆S

W

W1

H0

H2

I

D0

d

t1

t2

∆h1, ∆h2

L

W0

W2

e

30.0

15.0±0.3

7.5±0.5

7.5±1.5

3.75±1.0

(refer to the table below)

Thickness T (refer to the table below)

±2.0

18.0±0.5

16.0±0.5

10.0 max.

W0.5 to Y6.0

4.0±0.1

0.8±0.05

0.6±0.3

2.0 max.

2.0 max.

11.5 min.

4.0 max.

to line A

CodeItem Dimensions (mm)

9.0±0.5

11.0+0–2.0

NTPAD

NTPAA

Type D T

16.0 max. 5.5 max.

12.0 max. 5.0 max.

W0

W2

W

W1

H0

H2

∆h2∆h1

e

∆SP2 P

D

P1

P0

F d

l

øD0

L

t2 t1

T

A



!Note R44E9.pdf 05.4.13

for Inrush Current Suppression Lead Type Package

38

7



Taping Dimensions (NTPA7/NTPA9 Series)

Pitch of Component


Lead Spacing

Length from Hole Center to Lead

Length from Hole Center to Component

Body Diameter


Carrier Tape Width



Height of Component

Overflow of Lead


Lead Diameter (Sn-Plated Cu Wire)




Portion to cut in Case of Defect




P

P0

F

P1

P2

D

∆S

W

W1

H0

H2

I

D0

d

t1

t2

∆h1, ∆h2

L

W0

W2

e

12.7

12.7±0.3

5.0

6.35±1.3

3.85±0.8

(refer to the table below)

Thickness T 5.0 max.

±1.5

18.0±0.5

16.0±1.0

6.0 max.

W0.5 to Y4.0

4.0±0.3

0.6±0.05

0.6±0.3

2.0 max.

1.5 max.

11.0 min.

4.0 max.

to line A

CodeItem Dimensions (mm)

9.0

11.0+0–2.0

+0.8–0.3

+0.5–0.75

W0

W2

W

W1

H0

H2

∆h2∆h1

e

∆SP2 P

D

A

P1

P0

F d

l

øD0

L

t2 t1

T

Type D

11.0 max

9.0 max.

NTPA9

NTPA7


!Note R44E9.pdf 05.4.13

Note:1. Export Control

<For customers outside Japan>No muRata products should be used or sold, through any channels, for use in the design, development, production, utilization, maintenance or operation of, orotherwise contribution to (1) any weapons (Weapons of Mass Destruction (nuclear, chemical or biological weapons or missiles) or conventional weapons) or (2)goods or systems specially designed or intended for military end-use or utilization by military end-users.<For customers in Japan>For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is requiredfor export.

2. Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especiallyhigh reliability for the prevention of defects which might directly damage a third party's life, body or property, or when one of our products is intended for use inapplications other than those specified in this catalog.q Aircraft equipment w Aerospace equipmente Undersea equipment r Power plant equipmentt Medical equipment y Transportation equipment (vehicles, trains, ships, etc.)u Traffic signal equipment i Disaster prevention / crime prevention equipmento Data-processing equipment !0 Application of similar complexity and/or reliability requirements to the applications listed above

3. Product specifications in this catalog are as of January 2005. They are subject to change or our products in it may be discontinued without advance notice.Please check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives orproduct engineers.

4. Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

5. This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications ortransact the approval sheet for product specifications before ordering.

6. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effectof our and/or a third party's intellectual property rights and other related rights in consideration of your use of our products and/or information described orcontained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentionedabove under licenses without our consent.

7. No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process.

International Division3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan Phone: 81-3-5469-6123 Fax: 81-3-5469-6155 E-mail: [email protected]

Head Office1-10-1, Higashi Kotari, Nagaokakyo-shi, Kyoto 617-8555, JapanPhone: 81-75-951-9111

http://www.murata.com/

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

!Note R44E9.pdf 05.4.13

ntc thermistors - datasheet.octopart.com · cat.no.r44e-9 murata manufacturing co., ltd. ntc...

Documents