ntc thermistors - mouser electronicsntc thermistors for temperature sensor lead type nt ntc...

39
Cat.No.R44E-8 Murata Manufacturing Co., Ltd. NTC Thermistors Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering. !Note R44E8.pdf 04.1.26

Upload: others

Post on 07-Aug-2020

6 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: NTC Thermistors - Mouser ElectronicsNTC Thermistors for Temperature Sensor Lead Type NT NTC Thermistors E F ±3% ±1% E1 N6 Individual Specifications Product ID Code Resistance Tolerance

Cat.No.R44E-8

MurataManufacturing Co., Ltd.

NTC Thermistors

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R44E8.pdf 04.1.26

Page 2: NTC Thermistors - Mouser ElectronicsNTC Thermistors for Temperature Sensor Lead Type NT NTC Thermistors E F ±3% ±1% E1 N6 Individual Specifications Product ID Code Resistance Tolerance

1

2

3

4

5

6

Part Numbering 2

Basic Characteristics 4

for Temperature Compensation 0201 (0603) Size 5

for Temperature Compensation 0402 (1005) Size 6

for Temperature Compensation 0603 (1608) Size 8

for Temperature Compensation 0805 (2012) Size 10

for Temperature Compensation Temperature Characteristics (Reference Value) 12

Chip Type !Caution/Notice 16

Chip Type Package 19

for Temperature Sensor Resin Coated Radial Lead Type 22

for Temperature Sensor Temperature Characteristics (Reference Value) 24

for Temperature Sensor Lead Type !Caution/Notice 25

for Temperature Sensor Lead Type NTSA/NTSD Series Package 27

for Inrush Current Suppression Lead Type 28

Current-R Ratio (RT/R25) / Current-Temperature Characteristics (Typical) 30

for Inrush Current Suppression Lead Type !Caution / Notice 34

for Inrush Current Suppression Lead Type Package 36

1

2

3

4

5

6

CONTENTS

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Recycled Paper

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R44E8.pdf 04.1.26

Page 3: NTC Thermistors - Mouser ElectronicsNTC Thermistors for Temperature Sensor Lead Type NT NTC Thermistors E F ±3% ±1% E1 N6 Individual Specifications Product ID Code Resistance Tolerance

qProduct ID

wSeries

yResistance Tolerance

uIndividual Specifications

NTC Thermistors for Temperature Compensation Chip Type

NC NTC Thermistors Chip Type F

J

K

P

±1%

±5%

±10%

03

0S

Individual Specifications

Product ID

Code

Code

Series

Resistance Tolerance

Code

(Part Number)

tResistance

Expressed by three figures. The unit is ohm (Ω). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. If there is a decimal point, it is expressed by the capital letter "R". In this case, all figures are significant digits.

Structures and others are expressed by two figures.

Please contact us for details.

102

103

104

Ex.)

1kΩ

10kΩ

100kΩ

Code Resistance

Standard Type

Automobile Type

iPackaging

RA

RB

RC

RL

Plastic Taping 4mm Pitch

Paper Taping 4mm Pitch

Paper Taping 2mm Pitch (10000 pcs.)

Paper Taping 2mm Pitch (15000 pcs.)

Code Packaging

Plated Termination Series

eDimensions (LgW)

03

15

18

21

Code Dimensions (LgW)

0.60g0.30mm

1.00g0.50mm

1.60g0.80mm

2.00g1.25mm

EIA

0201

0402

0603

0805

rTemperature Characteristics

WB

WD

WF

WL

WM

XC

XF

XQ

XH

XM

XV

XW

Code Temperature Characteristics

Nominal B-Constant 4050e4099K

Nominal B-Constant 4150e4199K

Nominal B-Constant 4250e4299K

Nominal B-Constant 4450e4499K

Nominal B-Constant 4500e4549K

Nominal B-Constant 3100e3149K

Nominal B-Constant 3250e3299K

Nominal B-Constant 3650e3699K

Nominal B-Constant 3350e3399K

Nominal B-Constant 3500e3549K

Nominal B-Constant 3900e3949K

Nominal B-Constant 3950e3999K

y

J

e

18

w

P

r

XH

t

103

u

03

i

RBNC

q

2

o Part Numbering

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R44E8.pdf 04.1.26

Page 4: NTC Thermistors - Mouser ElectronicsNTC Thermistors for Temperature Sensor Lead Type NT NTC Thermistors E F ±3% ±1% E1 N6 Individual Specifications Product ID Code Resistance Tolerance

qProduct ID

wSeries

tResistance Tolerance

yIndividual Specifications

NTC Thermistors for Temperature Sensor Lead Type

NT NTC Thermistors

E

F

±3%

±1%

E1

N6

Individual Specifications

Product ID

Code Resistance Tolerance

Code

(Part Number)

rResistance

Expressed by three figures. The unit is ohm (Ω). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. If there is a decimal point, it is expressed by the capital letter "R". In this case, all figures are significant digits.

A lead structure and other specifications are expressed by two digits.

202

203

Ex.)

2kΩ

20kΩ

Code Resistance

Bulk

Standard Taping

SA0

SD0

SS0

for Temperature Sensors No Lead-coating Type

for Temperature Sensors Lead-coating Type

Temperature Sensors for Automotive Equipment

Code

uPackaging

A0

B0

Ammo Pack

Bulk

Code Packaging

Series

eTemperature Characteristics

WB

WC

WD

WF

XM

XH

XR

XV

Nominal B-Constant 4050e4099K

Nominal B-Constant 4100e4149K

Nominal B-Constant 4150e4199K

Nominal B-Constant 4250e4299K

Nominal B-Constant 3500e3549K

Nominal B-Constant 3350e3399K

Nominal B-Constant 3700e3749K

Nominal B-Constant 3900e3949K

Code Temperature Characteristics

y

B0

e

160

r

L

t

BMNT

q w

PA7

qProduct ID

wSeries

rResistance Tolerance

tIndividual Specifications

NTC Thermistors for Inrush Current Suppression

NT NTC Thermistors L

PA7

PA9

PAA

PAD

PAJ

PAN

±15%

DK

DN

BM

Individual Specifications

Product ID

Code

Code

Series

Resistance Tolerance

Code

(Part Number)

eResistance

Expressed by three figures. The unit is ohm (Ω). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. If there is a decimal point, it is expressed by the capital letter "R". In this case, all figures are significant digits.

A lead structure and other specifications are expressed by two capital letters.

3R0

100

Ex.)

10Ω

Code Resistance

Standard Type

Standard Type

Standard Type

yPackaging

A0

B0

Ammo Pack

Bulk

Code Packaging

Body Diameter

ø18mm, ø22mm

ø10mm, ø13mm

ø7mm, ø9mm

Inrush CurrentSuppressionLead Type

7mm

9mm

10mm

13mm

18mm

22mm

Nominal Body Diameter

3

t

F

w

SA0

e

XH

r

103

y

E1

u

B0NT

q

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R44E8.pdf 04.1.26

Page 5: NTC Thermistors - Mouser ElectronicsNTC Thermistors for Temperature Sensor Lead Type NT NTC Thermistors E F ±3% ±1% E1 N6 Individual Specifications Product ID Code Resistance Tolerance

4

1. Zero-power Resistance of Thermistor : R

2. B-Constant

R=R0 expB (1/T-1/T0) ..............(1)R : Resistance in ambient temperature T (K)(K : absolute temperature)R0 : Resistance in ambient temperature T0 (K)B : B-constant of Thermistor

as (1) formulaB=Rn (R/R0) / (1/T-1/T0) ............(2)

3. Thermal Dissipation Constant

When electric power P (mW) is spent in ambient temperature T1 and thermistor temperature rises T2, there is a formula as followsP=C (T2-T1) ..................(3)C : Thermal dissipation constant (mW/°C)Thermal dissipation constant is varied with dimensions, measurement conditions, etc.

4. Thermal Time Constant

Period in which Termistor's temperature will change 63.2% of its temperature difference from ambient temperature T0 (°C) to T1 (°C).

[Resistance vs. Temperature]

!Basic Characteristics

!Performance

[Thermal Time Constant]

Item

Resistance

Condition

Measured by zero-power in specified ambient temperature.

Rated Electric Power Shows necessary electric power that Thermistor's temperature rises 100˚C by self heating in ambient temperature 25˚C.

Permissive Operating Current It is possible to keep Thermistor's temperature rising max. 1˚C

Thermal DissipationConstant

Shows necessary electric power that Thermistor's temperature rises 1˚C by self heating.It is calculated by next formula. (mW/˚C)

B-Constant

Calculated between two specified ambient temperatures by next formula.T and T0 is absolute temperature (K).

Rn (R/R0)B =

1/TY1/T0

PC =

TYT0

102

101

Res

ista

nce

VS

. Tem

pera

ture

Cha

ract

eris

tics

(R/R

25)

−20Temperature (˚C)

0 20 40 60 80 12010010−2

10−1

1

B=3450B=3900B=4100

Basic Characteristics

T1

T0

Time

63.2%

X

Tem

pera

ture

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Please inquire about test conditions and ratings.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R44E8.pdf 04.1.26

Page 6: NTC Thermistors - Mouser ElectronicsNTC Thermistors for Temperature Sensor Lead Type NT NTC Thermistors E F ±3% ±1% E1 N6 Individual Specifications Product ID Code Resistance Tolerance

5

1

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

NTC Thermistorsfor Temperature Compensation 0201 (0603) Size

0201/0402/0603/0805 sized Chip NTC Thermistors have Ni barrier termination and provide excellent solderability and offer high stability in environment by unique inner construction.

Features1. Excellent solderability and high stability in environment2. Excellent long time aging stability3. High accuracy in resistance and B-constant4. Reflow soldering possible5. Lead is not contained in the product.

Applications1. Temperature compensation of transistor, IC, crystal oscillator of mobile communications equipment2. Temperature sensor for rechargeable batteries3. Temperature compensation of LCD4. Temperature compensation and sensing of car audio equipment (CD, MD, Tuner)5. Temperature compensation of several kinds of circuits

Electrode(Ag System + Ni Plating + Sn Plating)

0.15±0.05 0.15±0.050.60±0.03

(in mm)

0.30

±0.0

30.

30±0

.03

Part NumberResistance

(25°C)(k ohm)

B-Constant(25-50°C)

(K)

Permissive OperatingCurrent (25°C)

(mA)

Rated ElectricPower (25°C)

(mW)

Typical DissipationConstant (25°C)

(mW/°C)

OperatingTemperature Range

(°C)

NCP03XH103p05RL 10 3380 ±3% 0.31 100 1.0 -40 to 125

NCP03WB473p05RL 47 4050 ±3% 0.14 100 1.0 -40 to 125

A blank column is filled with resistance tolerance codes. (J: ±5%, K: ±10%)

Standard Land Dimensions

Chip

a

a b c

c

b

Land

Solder Resist

Soldering Methods

Reflow Soldering

(in mm)

0.25 0.30.25

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R44E8.pdf 04.1.26

Page 7: NTC Thermistors - Mouser ElectronicsNTC Thermistors for Temperature Sensor Lead Type NT NTC Thermistors E F ±3% ±1% E1 N6 Individual Specifications Product ID Code Resistance Tolerance

6

2

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

NTC Thermistorsfor Temperature Compensation 0402 (1005) Size

0201/0402/0603/0805 sized Chip NTC Thermistors have Nibarrier termination and provide excellentsolderability and offer high stability in environmentby unique inner construction.

Features1. Excellent solderability and high stability in environment2. Excellent long time aging stability3. High accuracy in resistance and B-constant4. Reflow soldering possible5. Same B-constant in the same resistance in the three sizes (0805 size/0603 size/0402 size) Easy to use smaller size in the circuits6. Lead is not contained in the product.7. NCP15, 18, 21 series are recognized by UL (UL1434, File No.E137188 Vol.2, Sec.2). Applications 1. Temperature compensation of transistor, IC, crystal oscillator of mobile communications equipments2. Temperature sensor for rechargeable batteries3. Temperature compensation of LCD4. Temperature compensation and sensing of car audio equipments (CD, MD, Tuner)5. Temperature compensation of several kinds of circuits

Electrode(Ag Alloy + Ni Plating + Sn Plating)

0.25±0.10 0.25±0.101.0±0.05

(in mm)

0.5±

0.05

0.5±

0.05

Part NumberResistance

(25°C)

B-Constant(25-50°C)

(K)

Permissive OperatingCurrent (25°C)

(mA)

Rated ElectricPower (25°C)

(mW)

Typical DissipationConstant (25°C)

(mW/°C)

OperatingTemperature Range

(°C)

NCP15XC220p03RC 22ohm 3100 ±3% 6.70 100 1.0 -40 to 125

NCP15XC330p03RC 33ohm 3100 ±3% 5.50 100 1.0 -40 to 125

NCP15XC470p03RC 47ohm 3100 ±3% 4.60 100 1.0 -40 to 125

NCP15XC680p03RC 68ohm 3100 ±3% 3.80 100 1.0 -40 to 125

NCP15XF101p03RC 100ohm 3250 ±3% 3.10 100 1.0 -40 to 125

NCP15XF151p03RC 150ohm 3250 ±3% 2.50 100 1.0 -40 to 125

NCP15XM221p03RC 220ohm 3500 ±3% 2.10 100 1.0 -40 to 125

NCP15XM331p03RC 330ohm 3500 ±3% 1.70 100 1.0 -40 to 125

NCP15XQ471p03RC 470ohm 3650 ±3% 1.40 100 1.0 -40 to 125

NCP15XQ681p03RC 680ohm 3650 ±3% 1.20 100 1.0 -40 to 125

NCP15XQ102p03RC 1.0k ohm 3650 ±3% 1.00 100 1.0 -40 to 125

NCP15XW152p03RC 1.5k ohm 3950 ±3% 0.81 100 1.0 -40 to 125

NCP15XW222p03RC 2.2k ohm 3950 ±3% 0.67 100 1.0 -40 to 125

NCP15XW332p03RC 3.3k ohm 3950 ±3% 0.55 100 1.0 -40 to 125

NCP15XM472p03RC 4.7k ohm 3500 ±3% 0.46 100 1.0 -40 to 125

NCP15XW682p03RC 6.8k ohm 3950 ±3% 0.38 100 1.0 -40 to 125

NCP15XH103p03RC 10k ohm 3380 ±3% 0.31 100 1.0 -40 to 125

NCP15XV103p03RC 10k ohm 3900 ±3% 0.31 100 1.0 -40 to 125

NCP15XW153p03RC 15k ohm 3950 ±3% 0.25 100 1.0 -40 to 125

NCP15XW223p03RC 22k ohm 3950 ±3% 0.21 100 1.0 -40 to 125

NCP15WL223p03RC 22k ohm 4485 ±1% 0.21 100 1.0 -40 to 125

NCP15WB333p03RC 33k ohm 4050 ±3% 0.17 100 1.0 -40 to 125

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R44E8.pdf 04.1.26

Page 8: NTC Thermistors - Mouser ElectronicsNTC Thermistors for Temperature Sensor Lead Type NT NTC Thermistors E F ±3% ±1% E1 N6 Individual Specifications Product ID Code Resistance Tolerance

7

2

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Part NumberResistance

(25°C)

B-Constant(25-50°C)

(K)

Permissive OperatingCurrent (25°C)

(mA)

Rated ElectricPower (25°C)

(mW)

Typical DissipationConstant (25°C)

(mW/°C)

OperatingTemperature Range

(°C)

Continued from the preceding page.

NCP15WL333p03RC 33k ohm 4485 ±1% 0.17 100 1.0 -40 to 125

NCP15WB473p03RC 47k ohm 4050 ±3% 0.14 100 1.0 -40 to 125

NCP15WL473p03RC 47k ohm 4485 ±1% 0.14 100 1.0 -40 to 125

NCP15WD683p03RC 68k ohm 4150 ±3% 0.12 100 1.0 -40 to 125

NCP15WL683p03RC 68k ohm 4485 ±1% 0.12 100 1.0 -40 to 125

NCP15WF104p03RC 100k ohm 4250 ±3% 0.10 100 1.0 -40 to 125

NCP15WL104p03RC 100k ohm 4485 ±1% 0.10 100 1.0 -40 to 125

NCP15WL154p03RC 150k ohm 4485 ±1% 0.08 100 1.0 -40 to 125

NCP15WM154p03RC 150k ohm 4500 ±3% 0.08 100 1.0 -40 to 125

NCP15WM224p03RC 220k ohm 4500 ±3% 0.06 100 1.0 -40 to 125

NCP15WM474p03RC 470k ohm 4500 ±3% 0.04 100 1.0 -40 to 125

A blank column is filled with resistance tolerance codes. (J: ±5%, K: ±10%)

Tolerance ±1% is also available for the following type.

10k ohm: NCP15XH103F03RC

47k ohm: NCP15WB473F03RC

100k ohm: NCP15WF104F03RC

Standard Land Dimensions

Chip

a

a b c

c

b

Land

Solder Resist

Soldering Methods

Reflow Soldering

(in mm)

0.4 0.50.4−0.5

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R44E8.pdf 04.1.26

Page 9: NTC Thermistors - Mouser ElectronicsNTC Thermistors for Temperature Sensor Lead Type NT NTC Thermistors E F ±3% ±1% E1 N6 Individual Specifications Product ID Code Resistance Tolerance

8

3

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

NTC Thermistorsfor Temperature Compensation 0603 (1608) Size

0201/0402/0603/0805 sized Chip NTC Thermistors have Nibarrier termination and provide excellent solderability and offer high stability in environment by unique inner construction.

Features1. Excellent solderability and high stability in environment2. Excellent long time aging stability3. High accuracy in resistance and B-constant4. Flow/Reflow soldering possible5. Same B-constant in the same resistance in the three sizes (0805 size/0603 size/0402 size) Easy to use smaller size in the circuits6. Lead is not contained in the product.7. NCP15, 18, 21 series are recognized by UL (UL1434, File No.E137188 Vol.2, Sec.2).

Applications 1. Temperature compensation of transistor, IC, crystal oscillator of mobile communications equipments2. Temperature sensor for rechargeable batteries3. Temperature compensation of LCD4. Temperature compensation and sensing of car audio equipments (CD, MD, Tuner)5. Temperature compensation of several kinds of circuits

Electrode(Ag Alloy + Ni Plating + Sn Plating)

0.2—0.6 0.2—0.61.6±0.15

(in mm)

0.8±

0.15

0.8±

0.15

Part NumberResistance

(25°C)

B-Constant(25-50°C)

(K)

Permissive OperatingCurrent (25°C)

(mA)

Rated ElectricPower (25°C)

(mW)

Typical DissipationConstant (25°C)

(mW/°C)

OperatingTemperature Range

(°C)

NCP18XF101p03RB 100ohm 3250 ±3% 3.10 100 1.0 -40 to 125

NCP18XF151p03RB 150ohm 3250 ±3% 2.50 100 1.0 -40 to 125

NCP18XM221p03RB 220ohm 3500 ±3% 2.10 100 1.0 -40 to 125

NCP18XM331p03RB 330ohm 3500 ±3% 1.70 100 1.0 -40 to 125

NCP18XQ471p03RB 470ohm 3650 ±3% 1.40 100 1.0 -40 to 125

NCP18XQ681p03RB 680ohm 3650 ±3% 1.20 100 1.0 -40 to 125

NCP18XQ102p03RB 1.0k ohm 3650 ±3% 1.00 100 1.0 -40 to 125

NCP18XW152p03RB 1.5k ohm 3950 ±3% 0.81 100 1.0 -40 to 125

NCP18XW222p03RB 2.2k ohm 3950 ±3% 0.67 100 1.0 -40 to 125

NCP18XW332p03RB 3.3k ohm 3950 ±3% 0.55 100 1.0 -40 to 125

NCP18XM472p03RB 4.7k ohm 3500 ±3% 0.46 100 1.0 -40 to 125

NCP18XW682p03RB 6.8k ohm 3950 ±3% 0.38 100 1.0 -40 to 125

NCP18XH103p03RB 10k ohm 3380 ±3% 0.31 100 1.0 -40 to 125

NCP18XW153p03RB 15k ohm 3950 ±3% 0.25 100 1.0 -40 to 125

NCP18XW223p03RB 22k ohm 3950 ±3% 0.21 100 1.0 -40 to 125

NCP18WB333p03RB 33k ohm 4050 ±3% 0.17 100 1.0 -40 to 125

NCP18WB473p03RB 47k ohm 4050 ±3% 0.14 100 1.0 -40 to 125

NCP18WD683p03RB 68k ohm 4150 ±3% 0.12 100 1.0 -40 to 125

NCP18WF104p03RB 100k ohm 4250 ±3% 0.10 100 1.0 -40 to 125

NCP18WM154p03RB 150k ohm 4500 ±3% 0.08 100 1.0 -40 to 125

NCP18WM224p03RB 220k ohm 4500 ±3% 0.06 100 1.0 -40 to 125

NCP18WM474p03RB 470k ohm 4500 ±3% 0.04 100 1.0 -40 to 125

Both flow and reflow soldering methods can be employed. A blank column is filled with resistance tolerance codes. (J: ±5%, K: ±10%)

Tolerance ±1% NCP18XH103F03RB is also availalbe for 10k ohm type.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R44E8.pdf 04.1.26

Page 10: NTC Thermistors - Mouser ElectronicsNTC Thermistors for Temperature Sensor Lead Type NT NTC Thermistors E F ±3% ±1% E1 N6 Individual Specifications Product ID Code Resistance Tolerance

9

3

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Standard Land Dimensions

Chip LandSolder Resist

b a

c

Soldering Methods a b c

Flow Soldering

Reflow Soldering

0.6~1.0

0.6~0.8

0.8~0.9

0.6~0.7

0.6~0.8

0.6~0.8

(in mm)

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R44E8.pdf 04.1.26

Page 11: NTC Thermistors - Mouser ElectronicsNTC Thermistors for Temperature Sensor Lead Type NT NTC Thermistors E F ±3% ±1% E1 N6 Individual Specifications Product ID Code Resistance Tolerance

10

4

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

NTC Thermistorsfor Temperature Compensation 0805 (2012) Size

0201/0402/0603/0805 sized Chip NTC Thermistors have Nibarrier termination and provide excellent solderability and offer high stability in environment by unique inner construction.

Features1. Excellent solderability and high stability in environment2. Excellent long time aging stability3. High accuracy in resistance and B-constant4. Flow/Reflow soldering possible5. Same B-constant in the same resistance in the three sizes (0805 size/0603 size/0402 size) Easy to use smaller size in the circuits6. Lead is not contained in the product.7. NCP15, 18, 21 series are recognized by UL (UL1434, File No.E137188 Vol.2, Sec.2).

Applications 1. Temperature compensation of transistor, IC, crystal oscillator of mobile communications equipments2. Temperature sensor for rechargeable batteries3. Temperature compensation of LCD4. Temperature compensation and sensing of car audio equipments (CD, MD, Tuner)5. Temperature compensation of several kinds of circuits

2.0±0.2

0.2—0.7 0.2—0.7

Electrode(Ag Alloy + Ni Plating + Sn Plating)

1.25

±0.2

0.85

±0.1

5

(in mm)

Part NumberResistance

(25°C)

B-Constant(25-50°C)

(K)

Permissive OperatingCurrent (25°C)

(mA)

Rated ElectricPower (25°C)

(mW)

Typical DissipationConstant (25°C)

(mW/°C)

OperatingTemperature Range

(°C)

NCP21XM221p03RA 220ohm 3500 ±3% 3.00 200 2.0 -40 to 125

NCP21XQ471p03RA 470ohm 3650 ±3% 2.00 200 2.0 -40 to 125

NCP21XQ102p03RA 1.0k ohm 3650 ±3% 1.40 200 2.0 -40 to 125

NCP21XW222p03RA 2.2k ohm 3950 ±3% 0.90 200 2.0 -40 to 125

NCP21XM472p03RA 4.7k ohm 3500 ±3% 0.65 200 2.0 -40 to 125

NCP21XV103p03RA 10k ohm 3900 ±3% 0.44 200 2.0 -40 to 125

NCP21XW153p03RA 15k ohm 3950 ±3% 0.36 200 2.0 -40 to 125

NCP21XW223p03RA 22k ohm 3950 ±3% 0.30 200 2.0 -40 to 125

NCP21WB333p03RA 33k ohm 4050 ±3% 0.24 200 2.0 -40 to 125

NCP21WB473p03RA 47k ohm 4050 ±3% 0.20 200 2.0 -40 to 125

NCP21WF104p03RA 100k ohm 4250 ±3% 0.14 200 2.0 -40 to 125

Both flow and reflow soldering methods can be employed.

A blank column is filled with resistance tolerance codes. (J: ±5%, K: ±10%)

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R44E8.pdf 04.1.26

Page 12: NTC Thermistors - Mouser ElectronicsNTC Thermistors for Temperature Sensor Lead Type NT NTC Thermistors E F ±3% ±1% E1 N6 Individual Specifications Product ID Code Resistance Tolerance

11

4

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Standard Land Dimensions

Chip LandSolder Resist

b a

c

Soldering Methods a b c

Flow Soldering

Reflow Soldering

1.0~1.1

1.0~1.1

0.9~1.0

0.6~0.7

1.0~1.2

1.0~1.2

(in mm)

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R44E8.pdf 04.1.26

Page 13: NTC Thermistors - Mouser ElectronicsNTC Thermistors for Temperature Sensor Lead Type NT NTC Thermistors E F ±3% ±1% E1 N6 Individual Specifications Product ID Code Resistance Tolerance

Temp.(°C)

Y40Y35Y30Y25Y20Y15Y10Y505101520253035404550556065707580859095100105110115120125

310.9516241.3103189.0297149.2410118.834995.460877.249163.009051.712842.616935.348429.509624.770120.900017.542414.798812.544510.67799.12707.83626.75465.85785.10104.44663.88883.41973.01732.66892.36782.10341.87341.67761.50621.3533

355.8225273.9749213.0028166.9433131.9972105.318384.669968.627955.981345.859437.818531.395926.211222.000018.560215.735113.402511.46199.84208.48777.34796.39885.59464.89644.29893.79463.36032.98292.65562.36722.11551.90051.71171.5427

406.1506310.2836239.4162186.2785146.2508115.903392.571674.561260.450649.225240.360133.319327.666723.100019.587816.688914.283512.272710.58659.17047.97336.97236.12075.37834.74054.20003.73293.32562.97102.65752.38302.14761.94041.7543

466.4273361.9654283.5445223.8615178.2524143.1912115.873794.513477.569263.925353.022644.264437.155231.350026.313722.198318.816816.016813.690511.754310.13188.78677.65156.66985.83325.12964.52604.00333.55173.15512.81012.51642.25932.0299

533.7338410.9624319.5042250.4150197.9958157.9775127.0049102.941983.971968.789156.727847.093839.316833.000027.840223.602720.103817.192814.763012.731611.02189.59828.39197.34466.44845.69195.04044.47443.98343.55093.17332.85072.56762.3140

609.2259465.4253359.1243279.4177219.3762173.8549138.8573111.841790.675973.837960.540249.978941.500134.650029.381725.033321.425218.409015.879813.755611.960010.45859.18108.06747.11076.30015.59944.98834.45653.98633.57453.22152.91062.6314

664.3056515.5265403.8362318.8331253.8746203.9390165.0322134.6100110.477391.045275.517063.043252.918044.650037.477031.615726.799622.811819.498616.741014.430212.514410.89769.49948.30787.30586.44615.70175.05844.49364.00233.58393.21782.8910

760.1664585.3101455.0514356.6516281.9940224.9983180.8857146.6143119.596497.972480.794167.073055.996647.000039.651333.616028.632724.486721.026118.132815.697713.670211.952210.46059.18418.10677.17886.37265.67345.05734.51964.06023.65693.2958

867.6854662.8785511.4800397.9586312.4449247.6116197.7665159.2898129.1445105.163086.223971.182159.106249.350041.846735.653530.514726.218922.616719.591317.033914.895513.076011.489910.12748.97287.97497.10466.34715.67755.09094.58824.14543.7477

961.1230745.8681584.2736461.2905367.3080295.0607238.7700194.7549159.8395131.7250109.258791.211476.562264.600054.222145.741938.773933.004328.210724.221020.877718.105915.766713.743912.019910.57019.32628.24937.31866.50145.79065.18534.65564.1828

1099.8152846.8316658.3723516.0066407.9914325.5294261.7070212.1227173.0330141.7472116.893697.041881.016468.000057.367848.635941.426035.427630.420826.234822.711619.778217.292515.134313.287611.728810.38639.21998.20837.31706.53895.87435.29084.7683

1255.3746959.0583740.0136575.7699452.0480358.2465286.1303230.4618186.8474152.1508124.7494102.986985.515371.400060.544251.583744.148937.933832.722028.344924.644821.550918.918516.623714.652412.982011.538110.27909.18318.21427.36566.63825.99765.4222

NCP15XC220J type NCP15XC330J type NCP15XC470J type NCP15XC680J typeResistance (Ω)

Center HighLowResistance (Ω)

Center HighLowResistance (Ω)

Center HighLowResistance (Ω)

Center HighLow

1

for Temperature Compensation Temperature Characteristics (Reference Value)

Temp.(°C)

Y40Y35Y30Y25Y20Y15Y10Y505101520253035404550556065707580859095100105110115120125

1588.39341220.8309947.2895740.9805584.6168465.2849373.0915301.4711245.1757200.3198164.7460136.3699113.517495.000079.061266.141455.609046.972639.856033.955929.046025.004121.615718.711316.252414.201812.453410.93859.63718.52127.55626.72656.00445.3842

1824.17481390.68511070.6526831.1384650.9600514.4408409.6997328.8767265.7593215.7848176.3948145.1611120.1519100.000083.668770.360759.456050.469743.028636.830331.648527.363623.756020.650618.010615.800113.908112.262510.84359.62238.56257.64826.84976.1618

2089.71831580.21051207.0558929.9356723.0199567.3679448.7753357.8766287.3508231.8627188.3951154.1328126.8562105.000088.323374.662063.410254.091546.337739.848234.397929.870826.042922.733919.909217.534315.493813.712312.170310.83869.67868.67447.79467.0340

2382.59011831.24641420.93431111.4707876.9252697.9274559.6372452.2066367.7635300.4797247.1190 204.5548170.2760142.5000118.591899.212283.413670.459059.784050.933843.569137.506232.423628.066924.378721.302618.680116.407814.455712.781911.334310.08979.00658.0763

2736.26222086.02761605.97901246.7076976.4400771.6612614.5496493.3150398.6389323.6772264.5922217.7417180.2278150.0000125.5030105.541189.184175.704564.542955.245547.472741.045335.634030.9759 27.0160 23.700120.862118.393716.265214.433512.843811.472310.27469.2426

3134.57752370.31581810.58371394.90341084.5298851.0519673.1630536.8150431.0262347.7940282.5927231.1992190.2843157.5000132.4850111.993095.115481.137269.506559.772351.596844.806239.064434.100829.863726.301423.240720.568418.255516.257814.517913.011611.691810.5510

4281.39103232.80282463.59871895.34061471.25031151.7079908.3588721.9176577.8973465.6678377.7788308.3256253.1370209.0000171.5071141.5184117.407797.882282.016169.042058.378849.572542.284936.212131.129626.858023.268120.227217.641615.446513.556211.941610.54959.3537

4947.90373703.75462798.87292135.88721645.03661278.03381000.6201789.6120627.7522502.4737405.0095328.4797268.0437220.0000181.5764150.6681125.6805105.335788.717275.058563.777154.414946.630940.114734.636730.012626.109922.790419.956517.541115.453113.662912.113910.7784

5703.88154232.70583171.82552400.94541834.75231414.67031099.4967861.4951680.2030540.8332433.1175349.0764283.1186231.0000191.7562160.0084134.1997113.073495.725981.395469.500359.581151.295144.326838.442533.453929.225625.614222.518719.870017.571515.593413.875412.3891

6422.08654849.20433695.39812843.01092206.87551727.56191362.53821082.8764866.8464698.5017566.6681462.4884379.7056313.5000257.2606212.2777176.1116146.8233123.0241103.562987.568374.358763.427454.318246.694440.287034.902130.340726.462423.169820.334317.912315.824314.0305

7421.85565555.63184198.30943203.83092467.55491917.05071500.93021184.4181941.6283753.7106607.5142492.7196402.0655330.0000272.3645226.0022188.5207158.0036133.0758112.587895.665681.622469.946460.172151.955045.018939.164934.185629.934726.311723.179720.494418.170816.1676

8555.82236349.05874757.73833601.41822752.12852122.00541649.24501292.24261020.3045811.2498649.6763523.6146424.6779346.5000287.6344240.0126201.2996169.6100143.5889122.0932104.250489.371776.942766.490357.663850.180843.838438.421333.778129.805023.357223.390020.813118.5837

NCPppXF101J type NCPppXF151J type NCPppXM221J type NCPppXM331J typeResistance (Ω)

Center HighLowResistance (Ω)

Center HighLowResistance (Ω)

Center HighLowResistance (Ω)

Center HighLow

Continued on the following page.

for Temperature Compensation Temperature Characteristics (Reference Value)

12

4

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R44E8.pdf 04.1.26

Page 14: NTC Thermistors - Mouser ElectronicsNTC Thermistors for Temperature Sensor Lead Type NT NTC Thermistors E F ±3% ±1% E1 N6 Individual Specifications Product ID Code Resistance Tolerance

2

for Temperature Compensation Temperature Characteristics (Reference Value)

Continued from the preceding page.

Temp.(°C)

Y40Y35Y30Y25Y20Y15Y10Y505101520253035404550556065707580859095100105110115120125

64.888347.038334.501325.586319.161614.493211.06538.52306.61795.18134.08563.24562.59592.09001.67141.34531.08950.88750.72720.59910.49620.41310.34550.29050.24520.20800.17720.15160.13020.11230.09720.08440.07360.0644

75.960554.519539.607029.102521.600816.197712.26389.37027.21905.60934.39073.46332.75092.20001.77091.43441.16880.95780.78940.65400.54460.45590.38320.32290.27480.23420.20040.17220.14860.12870.11180.09750.08540.0750

88.699663.032645.354733.019024.289618.057313.558110.27597.85516.05754.70683.68632.90792.31001.87151.52561.25071.03110.85480.71220.59630.50180.42400.36020.30710.26300.22610.19520.16920.14710.12840.11240.09880.0871

97.332470.557551.751938.379528.742421.739816.597912.78469.92697.77196.12834.86843.89383.13502.50712.01791.63421.33131.09080.89870.74420.61970.51820.43570.36790.31210.26580.22730.19530.16840.14580.12660.11040.0966

113.940781.779359.410543.653732.401224.296518.395614.055410.82868.41406.58605.19494.12633.30002.65632.15161.75321.43671.18410.98110.81690.68380.57480.48580.41220.35130.30070.25830.22290.19300.16780.14630.12810.1125

133.049594.548968.032049.528536.434427.085920.337215.413811.78269.08637.06025.52944.36183.46502.80732.28831.87611.54671.28211.06830.89450.75270.63600.54030.46060.39450.33920.29280.25380.22070.19260.16870.14830.1307

91.466169.064452.631440.491431.431324.604719.405815.422812.34609.94848.07076.58705.40794.46503.66403.02332.50832.09111.75221.47501.24721.05900.90340.77360.66500.57380.49710.43210.37690.33000.28960.25510.22540.1998

105.705279.125759.794145.630335.144027.303421.376916.869013.411110.73478.65257.01755.72644.70003.87913.21882.68502.25041.89531.60351.36251.16250.99620.85700.74000.64120.55780.48690.42630.37470.33010.29190.25880.2303

121.855790.426067.761751.292939.197030.222523.489218.404714.531611.55429.25307.45756.04844.93504.09663.41842.86702.41572.04511.73891.48481.27291.09590.94700.82130.71470.62440.54720.48110.42450.37540.33310.29640.2647

200.5638145.3912106.640379.085059.226844.797234.201726.343920.455416.014912.628110.03198.02376.46005.16614.15823.36752.74322.24781.85181.53361.27691.06780.89790.75800.64300.54780.46850.40250.34700.30030.26080.22740.1990

234.7869168.5150122.421789.953166.766150.065537.906228.962622.313417.337913.571210.70468.50286.80005.47354.43353.61262.96052.44002.02161.68341.40911.18451.00100.84930.72390.61960.53230.45930.39780.34570.30150.26390.2318

274.1625194.8281140.1871102.058875.076955.813441.906931.761924.279418.723214.548211.39398.98807.14005.78484.71533.86593.18712.64202.20131.84311.55111.31061.11330.94920.81300.69900.60330.52290.45480.39690.34750.30550.2694

NCPppXW222J type NCPppXW332J type NCPppXM472J type NCPppXW682J typeResistance (kΩ)

Center HighLowResistance (kΩ)

Center HighLowResistance (kΩ)

Center HighLowResistance (kΩ)

Center HighLow

Temp.(°C)

Y40Y35Y30Y25Y20Y15Y10Y505101520253035404550556065707580859095100105110115120125

10195.61937629.35485766.85834400.51403387.94632629.04532056.63471620.54981286.30771027.8581826.9792669.3557545.1310446.5000363.3735297.3779244.7447202.4473168.3307140.6799118.121599.624284.420671.836161.372152.663345.359939.235434.057529.663125.939422.755720.040717.7029

11822.47268767.74506570.22354971.78383796.93332923.39952269.59881775.22521399.05031110.2196887.2572713.4632577.3752470.0000384.8004316.7570262.1771218.0688182.2969153.1503129.2486109.550893.281179.749968.446358.996151.035944.331838.640333.790329.664226.122823.091320.4715

13674.640910050.80647466.78955603.17224244.65433242.58362498.35371939.80211517.87041196.1827949.5490758.5760609.9977493.5000406.4720336.5555280.1490234.3085196.9284166.3093141.0702120.1654102.814088.314276.145065.925157.278549.965143.730238.395633.839029.913126.539723.6139

14751.108711038.21548343.53966366.70124901.70963803.72512975.55662344.62531861.04101487.11391196.4806968.4295788.7002646.0000525.7319430.2488354.0986292.9025243.5424203.5369170.8993144.1371122.1404103.933188.793776.193865.627156.766149.274742.916937.529432.923228.995025.6127

17104.854012685.24809505.85527193.21915493.43554229.59933283.67492568.41092024.15791606.27521283.69131032.2446835.3513680.0000556.7325458.2867379.3200315.5038263.7488221.5791186.9979158.4991134.9600115.382899.028785.356073.839164.139755.905248.888142.918437.794733.408629.6183

19784.586814541.592310803.01468106.71726141.20194691.39753614.63942806.52222196.06791730.64731373.81561097.5142882.5499714.0000588.0872486.9313405.3220338.9995284.9176240.6177204.1015173.8563148.7522127.7737110.167395.380982.871072.289963.269355.551048.958643.278538.397934.1648

21.692816.232712.26999.36287.20845.59374.37583.44802.73682.18691.75951.42421.15990.95000.77310.63270.52070.43070.35820.29930.25130.21200.17960.15280.13060.11200.09650.08350.07250.06310.05520.04840.04260.0377

25.154218.654813.979210.57838.07866.22004.82893.77712.97672.36221.88781.51801.22851.00000.81870.67400.55780.46400.38790.32590.27500.23310.19850.16970.14560.12550.10860.09430.08220.07190.06310.05560.04910.0436

29.095021.384715.886811.92169.03126.89915.31564.12723.22952.54512.02031.61401.29791.05000.86480.71610.59610.49850.41900.35380.30010.25570.21880.18790.16200.14030.12190.10630.09300.08170.07200.06360.05650.0502

44.242032.071623.523617.445213.06479.88177.54455.81124.51223.53272.78562.21291.76991.42501.13960.91720.74280.60510.49580.40850.33830.28170.23550.19810.16720.14180.12080.10330.08880.07660.06630.05750.05020.0439

51.791237.172427.004819.842614.727811.04398.36176.38884.92213.82452.99362.36131.87561.50001.20740.97800.79690.65310.53820.44590.37130.31080.26130.22080.18730.15970.13670.11740.10130.08770.07630.06650.05820.0511

60.477042.976830.923622.513016.561112.31189.24427.00635.35574.13013.20922.51341.98261.57501.27601.04010.85280.70300.58280.48560.40660.34210.28910.24560.20940.17930.15420.13310.11530.10030.08760.07670.06740.0594

NCPppXQ471J type NCPppXQ681J type NCPppXQ102J type NCPppXW152J typeResistance (Ω)

Center HighLowResistance (Ω)

Center HighLowResistance (kΩ)

Center HighLowResistance (kΩ)

Center HighLow

Continued on the following page.

for Temperature Compensation Temperature Characteristics (Reference Value)

13

4

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R44E8.pdf 04.1.26

Page 15: NTC Thermistors - Mouser ElectronicsNTC Thermistors for Temperature Sensor Lead Type NT NTC Thermistors E F ±3% ±1% E1 N6 Individual Specifications Product ID Code Resistance Tolerance

3

for Temperature Compensation Temperature Characteristics (Reference Value)

Continued from the preceding page.

Temp.(°C)

Y40Y35Y30Y25Y20Y15Y10Y505101520253035404550556065707580859095100105110115120125

1489.81511072.3720781.2539575.6469428.6928322.4729244.8776187.6220144.9290112.862788.569170.012855.728144.650035.523628.441222.911618.564815.126412.390210.20058.44187.01945.86014.91564.14293.50362.97422.53582.16981.86161.60361.38691.2023

1747.91971245.4275898.4853655.8022483.9536360.8498271.6971206.4631158.2144122.259495.226774.730259.064747.000037.643130.333924.590720.047816.432513.538511.20919.32797.79796.54435.51784.67363.97173.38782.90192.49432.14961.85981.61531.4060

2045.61311442.79421030.7247745.2507544.9720402.7844300.7004226.6283172.2859132.1074102.128779.566062.444549.350039.789432.271826.327021.595217.806714.756312.286810.28118.64117.29026.17825.25914.49123.84923.31252.86022.47592.15141.87651.6403

2325.96311664.56041205.6590883.2052653.5386488.5367368.7125280.7073215.6355166.9555130.2753102.406881.061264.600051.108540.698032.609126.287921.307817.369514.233011.72119.70298.06576.73765.65224.76114.02883.41992.91562.49452.14151.84601.5950

2735.35931937.39071389.34451008.0144738.9776547.4555409.5999309.2166235.6064180.9801140.1394109.343785.928768.000054.166843.420535.015728.405623.165718.996715.656912.966910.79359.02067.57496.38725.40714.59783.92163.35892.88692.48942.15521.8701

3208.77192249.30201597.01231147.5848833.4974611.9463453.8837339.7697256.7833195.6923150.3734116.458690.860771.400057.264546.209237.505930.617325.122620.724417.180314.309211.976510.06348.49497.19976.12555.23414.48563.85993.33262.88652.50982.1871

NCPppWB473J type NCPppWD683J typeResistance (kΩ)

Center HighLow1361.2577966.2331692.8641501.6937366.6647270.3769201.0863150.7866113.966086.795166.589551.451640.029031.350024.350519.039914.984011.86639.45507.57876.11024.95424.03933.31132.72892.26071.88241.57531.32481.11950.95050.81080.69480.5981

1610.15381130.8501802.6093575.3848416.4640304.2188224.1931166.6233124.849894.286571.746554.995942.455433.000025.821520.335316.115412.849310.30628.31446.74555.50294.51343.72143.08432.56912.15071.80911.52911.29851.10770.94930.81720.7065

1899.79721320.2041927.4130658.2502471.8442341.4409249.3301183.6630136.4311102.168577.109658.637344.916434.650027.312821.664417.289013.879011.20609.09877.42836.09705.03054.17193.47712.91232.45102.07251.76051.50241.28781.10870.95870.8325

NCP15WL333J typeResistance (kΩ)

Center HighLowResistance (kΩ)

Center HighLow

Continued on the following page.

Temp.(°C)

Y40Y35Y30Y25Y20Y15Y10Y505101520253035404550556065707580859095100105110115120125

170.0056129.8266100.115677.938961.195748.462238.665331.039925.092520.430416.733713.780411.41169.50007.85526.52885.45314.57263.85023.25512.76242.35912.02301.74011.50221.30191.13220.98680.86270.75720.66650.58830.52060.4621

195.6520148.1710113.347187.558868.236753.649642.506233.892227.218622.021117.925514.673512.080510.00008.31456.94795.83364.91694.16093.53503.01432.58612.22751.92451.66851.45211.26801.10960.97380.85800.75800.67150.59640.5311

224.6043168.6845128.006598.120175.897559.243746.611736.914029.451123.676219.154215.585512.756710.50008.77877.37546.22525.27394.48543.82933.28092.82792.44672.12321.84861.61561.41651.24451.09650.96970.86000.76460.68150.6090

442.4201320.7159235.2360174.4523130.647398.817475.444958.111645.122235.327027.856122.129217.699314.250011.39599.17247.42836.05124.95834.08503.38292.81662.35541.98061.67211.41851.20831.03340.88780.76550.66250.57530.50170.4390

517.9122371.7242270.0479198.4259147.2781110.438583.616663.888049.220838.245329.936423.613118.756115.000012.07409.77997.96916.53065.38234.45933.71333.10822.61282.20821.87341.59691.36671.17411.01320.87750.76260.66500.58220.5113

604.7702429.7679309.2363225.1297165.6109123.117892.441770.062953.557441.301132.091625.133619.826415.750012.760510.40158.52787.03035.82794.85584.06573.42142.89112.45582.09381.79331.54191.33081.15341.00320.87560.76660.67390.5942

648.8828470.3834345.0129255.8634191.6160144.9322110.652585.230466.179251.813040.855532.456125.958920.900016.713913.452910.89498.87517.27225.99134.96164.13103.45462.90492.45242.08041.77221.51561.30211.12280.97170.84380.73590.6438

759.6046545.1955396.0702291.0246216.0079161.9765122.637793.702472.190556.093143.906734.632527.509022.000017.708514.343811.68809.57827.89406.54035.44624.55873.83213.23872.74772.34212.00441.72211.48601.28701.11850.97530.85390.7500

886.9963630.3263453.5466330.1902242.8960180.5728135.5811102.759078.550860.575047.067736.862629.078723.100018.715415.255512.507410.31118.54757.12195.96315.01814.24033.60183.07092.63022.26151.95181.69171.47141.28421.12440.98840.8715

NCPppXH103J type NCPppXW153J type NCPppXW223J typeResistance (kΩ)

Center HighLow281.4484205.0766151.0349112.452684.637364.246149.263038.053629.651223.279818.415314.669811.76689.50007.61956.14974.99404.07893.35002.76682.29761.91761.60661.35461.14680.97490.83230.71370.61440.53090.46070.40120.35050.3075

328.9962237.3866173.1845127.773095.326771.745954.563841.813132.330125.193819.785415.650812.468310.00008.07236.55595.35624.40073.63503.01892.52062.11481.78101.50911.28381.09660.94050.81010.70050.60780.52970.46310.40620.3577

383.6153274.1001198.0859144.8177107.097779.920860.283845.829035.162927.197121.204416.655713.178610.50008.53056.97145.73034.73593.93443.28582.75842.32651.96941.67711.43361.23041.06010.91730.79660.69420.60740.53320.46950.4151

NCPppXV103J typeResistance (kΩ)

Center HighLowResistance (kΩ)

Center HighLowResistance (kΩ)

Center HighLow

1046.0404752.9420548.5400404.1776300.9970226.4171171.9353131.7346101.758779.244062.186849.158039.128331.350024.942119.969316.086913.034910.62078.69957.16205.92724.92854.11453.45142.90882.46002.08831.78051.52351.30711.12590.97380.8441

1227.2628874.4491630.8514460.4568339.7972253.3626190.7661144.9635111.086785.841766.861352.470141.470933.000026.430321.298317.265814.076111.53779.50587.87026.54945.47514.59503.87423.28152.78872.37872.03751.75131.50931.30581.13410.9872

1436.28151013.0257723.7003523.2611382.6399282.8061211.1301159.1220120.966792.756371.707455.865543.844034.650027.937222.658918.484915.162612.502610.36088.62697.21876.06725.11874.33793.69263.15342.70262.32582.00821.73841.51061.31761.1517

NCPppWB333J typeResistance (kΩ)

Center HighLow

for Temperature Compensation Temperature Characteristics (Reference Value)

14

4

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R44E8.pdf 04.1.26

Page 16: NTC Thermistors - Mouser ElectronicsNTC Thermistors for Temperature Sensor Lead Type NT NTC Thermistors E F ±3% ±1% E1 N6 Individual Specifications Product ID Code Resistance Tolerance

4

Temp.(°C)

Y40Y35Y30Y25Y20Y15Y10Y505101520253035404550556065707580859095100105110115120125

20877.705314607.017710356.43437423.79095377.85633939.26182912.80702174.24211637.48871243.6953952.0198734.3785570.6436446.5000346.5388270.7529212.9209168.5099134.1230107.385486.414769.951856.886346.481438.173231.489426.086721.713618.133315.211512.807510.82189.18287.8181

24751.661217127.168912014.76198524.30456113.81114435.43683249.21562403.51461794.35781351.29431025.8697785.0184605.2524470.0000367.4804289.1859229.0139182.4853146.2153117.827695.419777.718263.583852.260443.166235.808429.827724.960520.954517.668314.950812.694910.82399.2586

29271.086720031.917013903.78329763.49016933.10444981.62293615.41582650.32141961.33901464.53181102.6846837.0523640.3553493.5000388.7133308.1016245.7074197.1257158.9993128.9620105.099686.130970.892258.611148.690240.617934.020028.621224.154120.470617.409214.855012.726310.9371

NCPppWM474J typeResistance (kΩ)

Center HighLow

for Temperature Compensation Temperature Characteristics (Reference Value)

Continued from the preceding page.

9772.54296837.32744847.69273474.96592517.29441843.90981363.44161017.7304766.4841582.1552445.6263343.7517267.1098209.0000162.2097126.735499.665178.877062.781050.265540.449432.743426.627621.757217.868314.739712.210810.16388.48797.12035.99505.06554.29833.6595

11585.88408016.97275623.93113990.10002861.78392076.16191520.90941125.0494839.9121632.5207480.1943367.4554283.3096220.0000172.0121135.3636107.198085.418668.441255.153344.664536.378729.762624.462320.205416.761413.961911.68369.80858.27036.99835.94235.06654.3338

13701.35979376.64206508.15384570.14433245.28292331.82351692.32231240.5760918.0736685.5255516.1503391.8117299.7408231.0000181.9509144.2178115.012092.271674.425260.365249.195540.316633.183627.435022.791119.012615.924213.397211.30629.58208.14906.95345.95705.1195

NCPppWM224J typeResistance (kΩ)

Center HighLow

Temp.(°C)

Y40Y35Y30Y25Y20Y15Y10Y505101520253035404550556065707580859095100105110115120125

4191.52212954.60272109.07001523.41121112.0223820.4005611.3519459.7296348.9722267.0836206.0809160.2427125.508399.000078.247062.248849.830040.134132.502226.472021.673717.834014.751612.252910.22768.57367.21676.10245.17664.41033.77093.23512.78702.4066

4397.11933088.59892197.22501581.88051151.0367846.5788628.9882471.6321357.0117272.4995209.7098162.6506127.0802100.000079.221663.167150.676640.903533.194627.090922.224318.322515.184112.635410.56578.87267.48116.33655.38394.59423.93423.38042.91642.5220

4612.33993228.34922288.83591642.42971191.3009873.5051647.0685483.7943365.1999277.9974213.3813165.0781128.6590101.000080.200464.092651.532541.683533.898327.721522.786718.822415.627813.028510.91399.18107.75436.57895.59894.78534.10423.53183.05162.6427

NCP15WF104F typeResistance (kΩ)

Center HighLow1639.08061173.8304850.9910624.0766462.6455346.4840261.9935199.9109153.8063119.313593.281273.470058.273946.530037.142829.834024.109419.595316.013713.155210.86109.01337.51476.29015.28994.46943.78903.22422.75532.36302.03191.75411.52031.3206

1747.91971245.4275898.4853655.8022483.9536360.8498271.6971206.4631158.2144122.259495.226774.730259.064747.000037.643130.333924.590720.047816.432513.538511.20919.32797.79796.54435.51784.67363.97173.38782.90192.49432.14961.85981.61531.4060

1863.79961321.2596948.5354689.0716506.1925375.7736281.7320213.2088162.7327125.265597.203176.004359.860147.470038.146330.839225.079220.508816.860513.931611.56739.65258.09106.80825.75494.88664.16293.55933.05592.63272.27391.97161.71611.4969

NCP15WB473F typeResistance (kΩ)

Center HighLow188.0202142.7877109.522184.822766.269452.228341.476533.146226.678021.629417.643014.471211.93719.90008.21626.85345.74434.83334.08333.46342.94862.52592.17241.87411.62251.41011.22961.07460.94190.82880.73130.64710.57400.5106

195.6520148.1710113.347187.558868.236753.649642.506233.892227.218622.021117.925514.673512.080510.00008.31456.94795.83364.91694.16093.53503.01432.58612.22751.92451.66851.45211.26801.10960.97380.85800.75800.67150.59640.5311

203.5731153.7418117.294090.374170.255455.104043.557034.651527.767522.417518.210714.877212.224410.10008.41327.04305.92385.00154.23953.60763.08122.64762.28391.97611.71571.49521.30741.14561.00670.88810.78560.69680.61960.5524

NCPppXH103F typeResistance (kΩ)

Center HighLow

6663.09744661.81423305.24502369.29501716.33711257.2112929.6193693.9071522.6028396.9240303.8361234.3761182.1203142.5000110.597586.410567.953553.779742.805234.271927.579222.325018.155214.834512.182910.04988.32566.92995.78724.85474.08753.45382.93072.4951

7899.46645466.11773834.49852720.52271951.21631415.56491036.9837767.0791572.6674431.2641327.4052250.5378193.1657150.0000117.281092.293473.089558.240046.664537.604630.453124.803720.292716.678913.776411.42829.51957.96616.68765.63884.77154.05163.45442.9549

9341.83626393.16504437.37763116.00752212.69291589.87961153.8561845.8472625.9593467.4038351.9206267.1443204.3687157.5000124.057498.330378.417362.912550.744541.158133.542427.488622.625218.705715.539412.963210.85749.13447.70886.53325.55614.74104.06163.4906

NCPppWM154J typeResistance (kΩ)

Center HighLow3729.03802647.23361902.57551383.31821016.2022754.3293565.4664427.6799326.4567251.2051194.8470152.2795119.861495.000074.736559.187447.171137.830130.508724.747520.181716.542413.631911.28139.38307.83826.57525.54154.68553.97933.39182.90112.49182.1455

4397.11933088.59892197.22501581.88051151.0367846.5788628.9882471.6321357.0117272.4995209.7098162.6506127.0802100.000079.221663.167150.676640.903533.194627.090922.224318.322515.184112.635410.56578.87267.48116.33655.38394.59423.93423.38042.91642.5220

5171.92953594.54282531.16281804.42231300.5024947.7345697.8966518.8009389.4505294.8601225.1420173.2936134.3970105.000083.766067.245954.306644.116136.026729.582024.412620.243416.870914.116611.867810.01848.49057.22746.17095.29104.55203.92913.40482.9573

NCPppWF104J typeResistance (kΩ)

Center HighLow

for Temperature Compensation Temperature Characteristics (Reference Value)

15

4

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R44E8.pdf 04.1.26

Page 17: NTC Thermistors - Mouser ElectronicsNTC Thermistors for Temperature Sensor Lead Type NT NTC Thermistors E F ±3% ±1% E1 N6 Individual Specifications Product ID Code Resistance Tolerance

Chip Type !Caution/Notice

16

4

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Caution (Storage and Operating Conditions)This product is designed for application in an ordinary environment (normal room temperature, humidity and atmospheric pressure). Do not use under the following conditions because all these factors can deteriorate the product characteristics or cause failures and burn-out.1. Corrosive gas or deoxidizing gas (Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.)

2. Volatile or flammable gas3. Dusty conditions4. Under high or low pressure5. Wet or humid locations6. Places with salt water, oils, chemical liquids or organic solvents7. Strong vibrations8. Other places where similar hazardous conditions exist

!Caution (Others)Be sure to provide an appropriate fail-safe function on your product to prevent secondary damages that may be caused by the abnormal function or the failure of our product.

Notice (Storage and Operating Conditions)To keep solderability of product from declining, thefollowing storage condition is recommended.1. Storage condition: Temperature -10 to +40 degree C Humidity less than 75%RH (not dewing condition)2. Storage term: Use this product within 6 months after delivery by first-in and first-out stocking system.

3. Handling after unpacking: After unpacking, reseal product promptly or store it in a sealed container with a drying agent.4. Storage place: Do not store this product in corrosive gas (sulfuric acid gas, chlorine gas, etc.) or in direct sunlight.

Notice (Rating)Use this product within the specified temperature range.Higher temperature may cause deterioration of the characteristics or the material quality of this product.

Notice (Handling)The ceramic of this product is fragile, and care must be taken not to load a excessive press-force or not to give a shock at handling. Such forces may cause cracking or chipping.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R44E8.pdf 04.1.26

Page 18: NTC Thermistors - Mouser ElectronicsNTC Thermistors for Temperature Sensor Lead Type NT NTC Thermistors E F ±3% ±1% E1 N6 Individual Specifications Product ID Code Resistance Tolerance

Allowable Reflow Soldering Temperature and Time Standard Soldering Conditions

Allowable Reflow Soldering Temperature and Time Standard Soldering Conditions

Locate this product horizontal to the direction in which stress acts.

Keep this product on the PC Board away from the Separation Line. Worst ← A-C-B-D → Better

[Component Direction]

[Mounting Close to Board Separation Line]

A

B

D

CPerforationHoles

Slit

Mounting Position

Reflow Soldering Conditions (NCP03/NCP15 Series)

(NCP18/21 Series)

Flow Soldering Conditions (NCP18/21 Series)

Choose a mounting position that minimizes the stress imposed on the chip during flexing or bending of the board.

Continued on the following page.

Allowable Reflow Soldering Temperature and Time Standard Soldering Conditions

Time (sec.)

Tem

pera

ture

(°C

)

Tem

pera

ture

(°C

)

280

270

260

250

240

230

220

2100 10 20 30

Preheating (in air) SolderingGradual cooling

(in air)300

200

100

01-2 min. 10sec. max.

Preheating : 160±10°C, 1-2 min.Soldering : 230-260°C, 10sec. max.

Time (sec.)

Tem

pera

ture

(°C

)

280

270

260

250

240

230

220

2100 1109020 30 40 50 60 70 1008010

Tem

pera

ture

(°C

)

Preheating (in air) SolderingGradual cooling

(in air)300

200

100

01-2 min. 20sec. max.

Preheating : 160±10°C, 1-2 min.Soldering : 230-270°C, 20sec. max.

Time (sec.)

Tem

pera

ture

(°C

)

280

270

260

250

240

230

2200 9020 30 40 50 60 70 8010

Tem

pera

ture

(°C

)

Preheating (in air) SolderingGradual cooling

(in air)300

200

100

01-2 min. 20sec. max.

Preheating : 160±10°C, 1-2 min.Soldering : 240-270°C, 20sec. max.

1

Notice (Soldering and Mounting) Chip Type !Caution/Notice

17

4

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R44E8.pdf 04.1.26

Page 19: NTC Thermistors - Mouser ElectronicsNTC Thermistors for Temperature Sensor Lead Type NT NTC Thermistors E F ±3% ±1% E1 N6 Individual Specifications Product ID Code Resistance Tolerance

For removing the flux after soldering, observe the following points in order to avoid deterioration of the characteristics or any change of the external electrodes' quality.

Thin or insufficient adhesive may result in loose component contact with land during flow soldering.Low viscosity adhesive causes chips to slip after mounting.

1. Solder and Paste(1) Reflow Soldering : NCP03/15/18/21 Series

Use RA/RMA type or equivalent type of solder paste. For your reference, we are using the solder paste below for any internal tests of this product.•RMA9086 90-4-M20 (Sn:Pb=63wt%:37wt%)(Manufactured by Alpha Metals Japan Ltd.,)•M705-221BM5-42-11 (Sn:Ag:Cu=96.5wt%:3.0wt%:0.5wt%)(Manufactured by Senju Metal Industry Co., LTD)

(2) Flow Soldering : NCP18/21 SeriesWe are using the solder paste below. For any internal tests of this product.•Sn : Pb=63wt%:37wt%•Sn : Ag : Cu=96.5wt% : 3.0wt% : 0.5wt%

2. FluxUse Rosin-based flux.Do not use strong acidic flux (with halide content exceeding 0.2wt%)

NCP03/15 NCP18/21

NCP03

NCP15

NCP18/NCP21

100µm

100µm

150µm

1/3EVTVE

1/3EVTVE

0.2mmVTVE

Part Number The solder paste thickness T

Reference : Optimum Solder Amount

TE

electrode

solder solder

Continued from the preceding page.

Solder and Flux

Cleaning Conditions

After cleaning, promptly dry this product. Drying

The amount of solder is critical. Standard height of fillet is shown in the table below.Too much soldering may cause mechanical stress, resulting in cracking, mechanical and/or electronic damage.

Printing Conditions of Solder Paste

Adhesive Application and Curing

Isopropyl Alcohol

Less than 5min. at room

temp. or less than 2min.

at 40°C max.

Less than 5min. 20W/r

Frequency of 28 to

40kHz.

Isopropyl Alcohol

Less than 5min. at room

temp. or less than 2min.

at 40°C max.

Less than 1min. 20W/r

Frequency of several

10kHz to 100kHz.

Solvent

Dipping Cleaning

Ultrasonic Cleaning

2

Chip Type !Caution/Notice

18

4

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R44E8.pdf 04.1.26

Page 20: NTC Thermistors - Mouser ElectronicsNTC Thermistors for Temperature Sensor Lead Type NT NTC Thermistors E F ±3% ±1% E1 N6 Individual Specifications Product ID Code Resistance Tolerance

NCP03

NCP15

NCP18

NCP21

15000

10000

4000

-

-

4000

Part NumberPaper Tape

Quantity (pcs.)

Plastic Tape

(in mm)

(in mm)

40 min.190-250

Vacant section

210-250

Top tape aloneCover tape alone

Leader unit

Trailer unit

Chip-mounting unit

Direction of feed

ø180

ø21.0±0.8

ø13.0±0.2

ø60

2.0±0.5

9.013.0±1.0

(1) A tape in a reel contains Leader unit and Trailer unit where

products are not packed. (Please refer to the figure right.)

(2) The top and base tapes or, plastic and cover tape are not

sticked at the first five pitches minimum.

(3) A label should be attached on the reel. (MURATA's part

number, inspection number and quantity should be marked

on the label.)

(4) Taping reels are packed in a package.

1. Dimensions of Reel

2. Taping Method

Tape Carrier Packaging

Minimum Quantity Guide

Continued on the following page.

W0Y1.5

W1.0Y0

W1.

0Y

0

1

Chip Type Package

19

4

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R44E8.pdf 04.1.26

Page 21: NTC Thermistors - Mouser ElectronicsNTC Thermistors for Temperature Sensor Lead Type NT NTC Thermistors E F ±3% ±1% E1 N6 Individual Specifications Product ID Code Resistance Tolerance

(1) Other Conditions

q Packaging

Products are packaged in the cavity of the base tape and

sealed by top tape and bottom tape.

w Tape

Top tape and bottom tape have no joints and products

are packaged and sealed in the cavity of the base tape,

continuously.

(2) Peeling force of top tape

(3) Pull Strength

Pull strength of top tape is specified at 10N minimum.

Pull strength of bottom tape are specified 5N minimum.

3. Paper Tape (NCP03/15/18 Series)

NCP15 Series8mm width 2mm pitch Tape

NCP18 Series8mm width 4mm pitch Tape

1.1 max4.0±0.1 4.0±0.12.0±0.05

ø1.5+0.1/–0

1.75

±0.1

3.5±

0.05

8.0±

0.3

Direction of feed

1.05∗

0.8 max4.0±0.12.0±0.05

ø1.5+0.1/–0 1.75

±0.1

3.5±

0.05

1.15

8.0±

0.3

Direction of feed

0.65∗

(in mm)

∗ Reference value∗ Reference value

∗ Reference value

165-180 ° F

∗ 1 Peeling angle : 165 to 180 degree against the fixed surface of tape.

∗ 2 Peeling speed : 300mm/min.

∗ 3 Peeling force : 0.1 - 0.6N

Continued on the following page.

Continued from the preceding page.

1.85

NCP03 Series

0.5 max4.0±0.12.0±0.05

ø1.5+0.1/–0 1.75

±0.1

3.5±

0.05

0.68

8.0±

0.3

Direction of feed

0.38∗

2

Chip Type Package

20

4

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R44E8.pdf 04.1.26

Page 22: NTC Thermistors - Mouser ElectronicsNTC Thermistors for Temperature Sensor Lead Type NT NTC Thermistors E F ±3% ±1% E1 N6 Individual Specifications Product ID Code Resistance Tolerance

∗ 1 Peeling angle : 165 to 180 degree against the fixed surface of tape.

∗ 2 Peeling speed : 300mm/min.

∗ 3 Peeling force : 0.1 - 0.7N

F165-180 °

Continued from the preceding page.

(2) Peeling force of cover tape

(3) Tape Strength

Pull strength of plastic tape and cover tape shall be specified

10N minimum.

(1) Other Conditions

q Packaging

Products are packaged in the each embossed cavity of

plastic tape and sealed by cover tape.

w Tape

Cover tape has no joints.

4. Plastic tape (NCP21 Series)

1.050.2

4.0±0.12.0±0.05

4.0±0.1 φ1.5

1.75

±0.1

φ1.0 1.45∗ ∗ Reference value

3.5±

0.05

8.0±

0.3

Direction of feed

2.25

(in mm)

+0.3-0

+0.1-1

3

Chip Type Package

21

4

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R44E8.pdf 04.1.26

Page 23: NTC Thermistors - Mouser ElectronicsNTC Thermistors for Temperature Sensor Lead Type NT NTC Thermistors E F ±3% ±1% E1 N6 Individual Specifications Product ID Code Resistance Tolerance

22

5

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

NTC Thermistorsfor Temperature Sensor Resin Coated Radial Lead Type

This product is a sensor type NTC Thermistor to be useful in the normal temperature range developed by the unique ceramic technology and the automatic assembly.

Features1. High-accuracy of +-1% +-1% of resistance and B-Constant tolerance is realized due to uniform thickness by the precise sheet forming method.2. Quick response This product provides faster response time due to its smaller size.3. Taping type is available (Standard type)4. Strong lead strength Original lead-wiring technique assures reliable connection. It can be formed and bent flexibly according to the mounting conditions.5. Lead Coating type The lead wires of Lead Coating type are coated with strong and flexible resin.

Applications1. Rechargeable batteries2. Battery charging circuits3. Head of printers4. DC fan motors5. Home appliance equipments

Solder Plated Copper Ply Wireφ0.4±0.03

31±1

2.5±1.0

6.0m

ax.

3.3max. 2.5max.

Epoxy Resin

(in mm)

NTSA0XM202_E1B0NTSA0WB203_E1B0NTSA0WC303_E1B0

Solder Plated Copper Ply Wireφ0.4±0.03

31±1

2.5±1.0

6.0

max

.

3.0 max. 1.8 max.

Epoxy Resin

(in mm)

NTSA Series

Part NumberResistance

(25°C)(k ohm)

B-Constant(25-50°C)

(K)

Permissive OperatingCurrent (25°C)

(mA)

Rated ElectricPower (25°C)

(mW)

Typical DissipationConstant (25°C)

(mW/°C)

Thermal TimeConstant(25°C)(s)

OperatingTemperature Range

(°C)

NTSA0XM202pE1B0 2.0 3500 ±1% 1.05 21 2.1 7 -40 to 125

NTSA0XR502pE1B0 5.0 3700 ±1% 0.68 21 2.1 7 -40 to 125

NTSA0XH103pE1B0 10 3380 ±1% 0.38 15 1.5 7 -40 to 125

NTSA0XV103pE1B0 10 3900 ±1% 0.46 21 2.1 7 -40 to 125

NTSA0WB203pE1B0 20 4050 ±1% 0.31 21 2.1 7 -40 to 125

NTSA0WC303pE1B0 30 4100 ±1% 0.26 21 2.1 7 -40 to 125

NTSA0WD503pE1B0 50 4150 ±1% 0.20 21 2.1 7 -40 to 125

NTSA0WF104pE1B0 100 4250 ±1% 0.14 21 2.1 7 -40 to 125

A blank column is filled with resistance tolerance codes. (F: ±1%, E: ±3%)

Taping type of part numbers with "N6A0" is available. (Lead spacing=5mm)

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the "Package" page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R44E8.pdf 04.1.26

Page 24: NTC Thermistors - Mouser ElectronicsNTC Thermistors for Temperature Sensor Lead Type NT NTC Thermistors E F ±3% ±1% E1 N6 Individual Specifications Product ID Code Resistance Tolerance

23

5

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Lead-Coating Type

Features1. Electric insulation on lead wire2. Excellent bending resistance due to suitable hardness of surface coating3. Easy handling due to most suitable hardness of surface of coating4. Measurement accuracy of +-1 (degree C) or less in the range from -40 to +70 (degree C)

3.8 max.

0.60-0.952.5

+1.5−0.5

2.5 max.

φ0.4±0.03

(Solder PlatedCopper Ply Wire)

(in mm)

5±1

27.0

±2.0

3±1.

5

(Coa

ting

Are

a)

NTSD0XM202_E1B0NTSD0WB203_E1B0NTSD0WC303_E1B0

3.0 max.

0.60-0.952.5

+1.5−0.5

2.0 max.

φ0.4±0.03

(Solder PlatedCopper Ply Wire)

(in mm)

5±1

27.0

±2.0

3±1.

5

(Coa

ting

Are

a)

NTSD Series

Part NumberResistance

(25°C)(k ohm)

B-Constant(25-50°C)

(K)

Permissive OperatingCurrent (25°C)

(mA)

Rated ElectricPower (25°C)

(mW)

Typical DissipationConstant (25°C)

(mW/°C)

Thermal TimeConstant(25°C)(s)

OperatingTemperature Range

(°C)

NTSD0XM202pE1B0 2.0 3500 ±1% 1.05 21 2.1 7 -40 to 125

NTSD0XR502pE1B0 5.0 3700 ±1% 0.68 21 2.1 7 -40 to 125

NTSD0XH103pE1B0 10 3380 ±1% 0.38 15 1.5 7 -40 to 125

NTSD0XV103pE1B0 10 3900 ±1% 0.46 21 2.1 7 -40 to 125

NTSD0WB203pE1B0 20 4050 ±1% 0.31 21 2.1 7 -40 to 125

NTSD0WC303pE1B0 30 4100 ±1% 0.26 21 2.1 7 -40 to 125

NTSD0WD503pE1B0 50 4150 ±1% 0.20 21 2.1 7 -40 to 125

NTSD0WF104pE1B0 100 4250 ±1% 0.14 21 2.1 7 -40 to 125

A blank column is filled with resistance codes. (F: ±1%, E: ±3%)

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the "Package" page.

Temperature Tolerance-Temperature CharacteristicsResistance Tolerance +/-1% Type

Tem

pera

ture

Tol

eran

ce [±

˚C]

-40 125Temperature [˚C]

0 50 100

1.0

2.0

3.0

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R44E8.pdf 04.1.26

Page 25: NTC Thermistors - Mouser ElectronicsNTC Thermistors for Temperature Sensor Lead Type NT NTC Thermistors E F ±3% ±1% E1 N6 Individual Specifications Product ID Code Resistance Tolerance

Temp.(°C)

Y40Y35Y30Y25Y20Y15Y10Y505101520253035404550556065707580859095100105110115120125

42.85932.24924.50418.77714.51611.3278.9067.0355.6004.4893.6232.9462.4091.9801.6321.3521.1260.9420.7920.6700.5690.4850.4150.3580.3090.2680.2330.2030.1780.1560.1370.1210.1070.096

44.65733.50525.38819.40214.96111.6449.1337.1985.7164.5713.6822.9872.4372.0001.6511.3711.1430.9580.8070.6830.5820.4970.4260.3670.3180.2760.2400.2100.1830.1610.1420.1250.1110.099

46.52634.80726.30220.04615.41711.9699.3657.3635.8344.6553.7413.0292.4662.0201.6711.3891.1610.9740.8220.6970.5940.5080.4360.3770.3260.2840.2470.2160.1890.1660.1470.1300.1150.103

118.39088.74767.12751.11239.24630.40023.71818.71014.83111.7419.3657.5266.0864.9504.0343.3082.7292.2591.8771.5731.3251.1210.9530.8110.6930.5940.5100.4410.3830.3330.2910.2550.2230.197

123.48492.29569.61452.86040.48031.27524.33919.15415.14811.9649.5207.6246.1605.0004.0823.3542.7732.2991.9141.6071.3561.1490.9780.8340.7140.6120.5270.4560.3960.3450.3020.2640.2320.205

128.78195.97572.18554.66241.74832.17224.97519.60715.46912.1899.6777.7426.2345.0504.1313.4012.8162.3401.9521.6411.3871.1771.0030.8570.7340.6310.5440.4710.4100.3580.3130.2750.2410.213

188.021142.788109.52284.82366.27052.22941.47733.14726.67821.63017.64314.47211.9389.9008.2176.8545.7454.8344.0843.4642.9492.5262.1731.8751.6231.4111.2301.0750.9420.8290.7320.6470.5740.511

195.652148.171113.34787.55968.23753.65042.50633.89227.21922.02117.92614.67412.08110.0008.3156.9485.8344.9174.1613.5353.0142.5862.2281.9251.6691.4521.2681.1100.9740.8580.7580.6710.5960.531

203.573153.741117.29490.37470.25555.10443.55734.65127.76722.41718.21014.87712.22410.1008.4137.0435.9235.0014.2393.6073.0812.6472.2831.9761.7151.4951.3071.1451.0060.8880.7850.6960.6190.552

332.325238.323173.098127.19194.52470.96253.82041.23731.87824.83919.51415.45312.3269.9007.9716.4595.2674.3203.5632.9542.4622.0621.7361.4671.2451.0610.9080.7810.6740.5830.5070.4420.3860.339

347.808248.591179.973131.83297.67973.11955.30142.25732.58225.32419.84715.67912.47810.0008.0686.5525.3534.3993.6353.0202.5212.1151.7831.5101.2841.0960.9390.8080.6980.6050.5270.4600.4030.354

363.977259.275187.102136.629100.93075.33456.81743.29933.29825.81520.18315.90712.63010.1008.1666.6455.4404.4793.7083.0862.5822.1701.8321.5531.3231.1310.9710.8370.7240.6280.5470.4790.4200.369

NTSp0XM202F type NTSp0XR502F type NTSp0XH103F type NTSp0XV103F typeResistance (kΩ)

Center HighLowResistance (kΩ)

Center HighLowResistance (kΩ)

Center HighLowResistance (kΩ)

Center HighLow

1

Temp.(°C)

Y40Y35Y30Y25Y20Y15Y10Y505101520253035404550556065707580859095100105110115120125

700.008502.881365.460267.924198.531149.036112.85585.96066.03951.15439.92731.38224.84319.80015.81912.71810.2868.3716.8515.6434.6743.8893.2512.7272.2981.9551.6711.4241.2171.0440.8980.7790.6790.590

733.007524.831380.184277.845205.260153.642116.01688.12567.52252.16840.61731.84725.15120.00016.01412.90210.4578.5276.9935.7714.7893.9923.3432.8092.3712.0201.7291.4761.2641.0850.9350.8120.7080.617

767.485547.685395.462288.106212.196158.374119.25490.33669.03253.19741.31432.31525.46120.20016.21013.08810.6308.6867.1375.9014.9064.0973.4372.8932.4462.0871.7891.5291.3121.1280.9730.8470.7390.644

1097.262785.054568.281415.020306.393229.194172.958131.298100.54277.63560.41147.34237.36929.70023.66318.97215.30412.42310.1428.3346.8875.7174.7693.9923.3562.8492.4302.0671.7641.5101.2971.1230.9760.846

1149.500819.651591.391430.529316.870236.337177.842134.630102.81679.18361.46048.04537.83430.00023.95519.24915.56012.65710.3548.5257.0585.8694.9054.1133.4632.9452.5162.1431.8321.5711.3501.1711.0190.886

1204.104855.688615.380446.573327.672243.678182.864138.033105.13180.75562.52148.75438.30030.30024.24019.52815.81912.89410.5698.7197.2326.0255.0444.2373.5743.0442.6052.2221.9031.6331.4071.2221.0650.927

1859.7091328.527960.265702.528519.195387.052291.216220.570168.570130.250101.32279.24862.42349.50039.33831.45825.30820.48916.68313.61511.1599.2367.6846.4175.3834.5313.8293.2502.7702.3682.0321.7511.5141.312

1948.5751387.289999.456728.895537.039399.167299.469226.186172.393132.857103.08980.43063.20150.00039.82531.91825.73320.87717.03413.92911.4399.4857.9066.6145.5584.6863.9673.3732.8782.4652.1181.8281.5831.374

2041.4841448.5061040.143756.177555.440411.621307.927231.921176.285135.503104.87581.62163.98250.50040.31532.38226.16321.27017.39014.24911.7259.7418.1336.8165.7384.8464.1093.4992.9912.5652.2071.9081.6551.438

4059.0352876.2612062.7761497.8001098.895813.431607.840457.312347.243266.643206.172160.304125.54599.00078.24062.23249.80340.11632.50326.39621.53117.74014.69312.21710.2058.5547.2006.0885.1674.4013.7623.2312.7851.438

4256.7523005.8882148.5141555.0201137.312839.314625.338469.127355.224272.045209.803162.713127.117100.00079.21563.15050.64940.88533.19527.01422.07918.22615.1242.598

10.5428.8527.4636.3215.3744.5853.9253.3762.9132.520

4463.6543141.0422237.5911614.2641176.955865.934643.275481.198363.353277.529213.477165.141128.696101.00080.19364.07551.50541.66433.89827.64322.63918.72415.56612.99010.8909.1607.7366.5625.5884.7754.0943.5273.0482.640

NTSp0WB203F type NTSp0WC303F type NTSp0WD503F type NTSp0WF104F typeResistance (kΩ)

Center HighLowResistance (kΩ)

Center HighLowResistance (kΩ)

Center HighLowResistance (kΩ)

Center HighLow

for Temperature Sensor Temperature Characteristics (Reference Value)for Temperature Sensor Temperature Characteristics (Reference Value)

24

5

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R44E8.pdf 04.1.26

Page 26: NTC Thermistors - Mouser ElectronicsNTC Thermistors for Temperature Sensor Lead Type NT NTC Thermistors E F ±3% ±1% E1 N6 Individual Specifications Product ID Code Resistance Tolerance

for Temperature Sensor Lead Type !Caution/Notice

25

5

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Caution (Storage and Operating Conditions)This product is designed for application in an ordinary environment (normal room temperature, humidity and atmospheric pressure). Do not use under the following conditions because all these factors can deteriorate the product characteristics or cause failures and burn-out.1. Corrosive gas or deoxidizing gas (Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.)

2. Volatile or flammable gas3. Dusty conditions4. Under high or low pressure5. Wet or humid locations6. Places with salt water, oils, chemical liquids or organic solvents7. Strong vibrations8. Other places where similar hazardous conditions exist

!Caution (Others)Be sure to provide an appropriate fail-safe function on your product to prevent secondary damages that may be caused by the abnormal function or the failure of our product.

Notice (Storage and Operating Conditions)To keep solderability of product from declining, thefollowing storage condition is recommended.1. Storage condition: Temperature -10 to +40 degree C Humidity less than 75%RH (not dewing condition)2. Storage term: Use this product within 6 months after delivery by first-in and first-out stocking system.

3. Handling after unpacking: After unpacking, reseal product promptly or store it in a sealed container with a drying agent.4. Storage place: Do not store this product in corrosive gas (sulfuric acid gas, chlorine gas, etc.) or in direct sunlight.

Notice (Rating)Use this product within the specified temperature range.Higher temperature may cause deterioration of the characteristics or the material quality of this product.

Notice (Soldering and Mounting)1. Be sure that the preheat-up does not melt the soldering of this product. Excessive heat may cause failure to open, short or insulation break down.2. Do not touch the body with soldering iron. The soldering point should be min. 5mm away from the root of lead wire.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R44E8.pdf 04.1.26

Page 27: NTC Thermistors - Mouser ElectronicsNTC Thermistors for Temperature Sensor Lead Type NT NTC Thermistors E F ±3% ±1% E1 N6 Individual Specifications Product ID Code Resistance Tolerance

for Temperature Sensor Lead Type !Caution/Notice

26

5

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Notice (Handling)1. The ceramic element of this product is fragile, and care must be taken not to load an excessive press-force or not to give a shock at handling. Such forces may cause cracking or chipping.2. Do not apply an excessive force to the lead. Otherwise, it may cause junction between lead and element to break or crack. Holding element by side lead wire is recommended when lead wire is bent or cut.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R44E8.pdf 04.1.26

Page 28: NTC Thermistors - Mouser ElectronicsNTC Thermistors for Temperature Sensor Lead Type NT NTC Thermistors E F ±3% ±1% E1 N6 Individual Specifications Product ID Code Resistance Tolerance

for Temperature Sensor Lead Type NTSA/NTSD Series Package

27

5

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Item Code Dimensions (mm)

Pitch of Component

Pitch of Sprocket Hole

Lead Spacing

Lead Length from Hole Center to Component Center

Lead Length from Hole Center to Lead

Body Diameter

Deviation along Tape, Left or Right

Carrier Tape Width

Position of Sprocket Hole

Lead Distance between Reference and Bottom Planes

Height of Component

Overflow of Lead

Diameter of Sprocket Hole

Lead Diameter

Total Tape Thickness

Total Thickness, Tape and Lead Wire

Deviation across Tape

Portion to Cut in Case of Defect

Hole Down Tape Width

Hole Down Tape Position

Coating Extension on Lead

Thickness

P

P0

F

P2

P1

D

∆S

W

W1

H0

H2

I

D0

d

t1

t2

∆h1, ∆h2

L

W0

W2

e

T

12.7

12.7±0.3

5.0+0.8/–0.2

6.35±1.3

3.85±0.8

3.5 max.

0±2.0

18.0±0.5

9.0±0.5

16.0±1.0

4.0 max.

+0.5 to –1.0

4.0±0.1

0.50±0.03

0.6±0.3

1.6 max.

1.0 max.

11.0+0/–2.0

11.0 min.

1.5±1.5

Up to the crimp point

2.6 max.

(in mm)

Minimum Quantity

Taping Dimensions (NTSA Series)

P2

P0I

L

P ∆S

H2

W2

W0

H0W1

W

t2 t1

∆h2 ∆h1

T

øD0

D

P1 ød

F

e

Part NumberAmmo Pack

Minimum Quantity (pcs.)

Bulk

NTSA 3000 100

NTSD - 100

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R44E8.pdf 04.1.26

Page 29: NTC Thermistors - Mouser ElectronicsNTC Thermistors for Temperature Sensor Lead Type NT NTC Thermistors E F ±3% ±1% E1 N6 Individual Specifications Product ID Code Resistance Tolerance

28

6

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

NTC Thermistorsfor Inrush Current Suppression Lead Type

This product effectively supress surge current which are generated when switching power regulators or similar switches are turned on.

Features1. Lead is not contained in the ceramic element, the terminations, the solder for inner connection and the coating resin.2. Most suitable for power supplies of less than 100W.3. Excellent recovery characteristics due to resin coating with excellent heat characteristics4. Highly reliable

Applications1. Switching power supplies2. CRT monitors 3. Color televisions4. VCR-Power supplies 5. Other power circuits

Coating Extensionon Lead : to line A

10.0

max

.3.

5±1.

0

NTPAN : 23.0 max.NTPAJ : 20.0 max. 5.5 max.

10.0±1.5

ø0.8±0.05Sn plated Cu wire

A

(in mm)

NTPAN/NTPAJ Series

Coating Extensionon Lead : to line A

10.0

max

.3.

5±1.

0

NTPAD : 16.0 max.NTPAA : 12.0 max.

5.5 max.5.0 max.

7.5±1.5

ø0.8±0.05Sn plated Cu wire

A

(in mm)

NTPAD/NTPAA Series

Coating Extensionon Lead : to line A

6.0

max

.3.

5±1.

0

NTPA7 : 9.0 max.NTPA9 : 11.0 max.

5.0 max.

5.0±1.5

ø0.6±0.05Sn plated Cu wire

A

(in mm)

NTPA7/NTPA9 Series

Part NumberResistance

(25°C)(ohm)

Permissible Max.Current (25°C)

(A)

Permissible Max.Current (55°C)

(A)

Thermal TimeConstant (25°C)(s)

Thermal DissipationConstant(mW/°C)

PermissibleElectrolytic Capacitor

(µF)

NTPAN3R0LDKB0 3.0 ±15% 5.4 4.7 135 26.8 8600 at 100V

NTPAN4R0LDKB0 4.0 ±15% 4.7 4.1 130 26.8 8600 at 100V

NTPAN6R0LDKB0 6.0 ±15% 3.9 3.4 130 26.8 8600 at 100V

NTPAJ4R0LDKB0 4.0 ±15% 4.0 3.5 125 21.8 5000 at 100V

NTPAJ6R0LDKB0 6.0 ±15% 3.4 2.9 125 21.8 5000 at 100V

NTPAJ8R0LDKB0 8.0 ±15% 3.0 2.6 130 21.8 5000 at 100V

NTPAJ100LDKB0 10.0 ±15% 2.6 2.2 130 21.8 5000 at 100V

NTPAD3R9LDNB0 3.9 ±15% 3.3 2.9 65 18.2 2700 at 100V

NTPAD5R1LDNB0 5.1 ±15% 3.0 2.6 85 18.8 2700 at 100V

NTPAD8R0LDNB0 8.0 ±15% 2.7 2.3 65 18.7 2700 at 100V

NTPAD160LDNB0 16.0 ±15% 2.0 1.7 100 19.1 2700 at 100V

NTPAA2R2LDNB0 2.2 ±15% 3.7 3.2 70 13.5 1400 at 100V

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R44E8.pdf 04.1.26

Page 30: NTC Thermistors - Mouser ElectronicsNTC Thermistors for Temperature Sensor Lead Type NT NTC Thermistors E F ±3% ±1% E1 N6 Individual Specifications Product ID Code Resistance Tolerance

29

6

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Part NumberResistance

(25°C)(ohm)

Permissible Max.Current (25°C)

(A)

Permissible Max.Current (55°C)

(A)

Thermal TimeConstant (25°C)(s)

Thermal DissipationConstant(mW/°C)

PermissibleElectrolytic Capacitor

(µF)

Continued from the preceding page.

NTPAA3R9LDNB0 3.9 ±15% 2.7 2.3 70 13.5 1400 at 100V

NTPAA5R1LDNB0 5.1 ±15% 2.5 2.2 70 13.5 1400 at 100V

NTPAA8R2LDNB0 8.2 ±15% 2.0 1.7 70 13.5 1400 at 100V

NTPAA100LDNB0 10.0 ±15% 1.7 1.5 70 13.5 1400 at 100V

NTPA9160LBMB0 16.0 ±15% 1.4 1.2 65 11.6 800 at 100V

NTPA74R0LBMB0 4.0 ±15% 2.3 2.0 40 9.4 700 at 100V

NTPA78R0LBMB0 8.0 ±15% 1.7 1.5 40 9.5 570 at 100V

NTPA7160LBMB0 16.0 ±15% 1.2 1.0 40 9.9 400 at 100V

NTPA7220LBMB0 22.0 ±15% 1.0 0.88 40 9.1 400 at 100V

NTPAD/NTPAA/NTPA7 series are also availabe on tape.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the "Package" page.

Application Circuit

NTC

−t˚

+

Determination of Allowable Current

Max

. cur

rent

rat

io

1.0

0

0.5

Ambient temperature [˚C]20 40 60 80 100 120 140 160

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R44E8.pdf 04.1.26

Page 31: NTC Thermistors - Mouser ElectronicsNTC Thermistors for Temperature Sensor Lead Type NT NTC Thermistors E F ±3% ±1% E1 N6 Individual Specifications Product ID Code Resistance Tolerance

Current-R Ratio (RT/R25) / Current-Temperature Characteristics (Typical)

30

6

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

NTPAN3R0L Type

0.01 0.1

Current (A)

Ta=25˚C

1 10

Resistance RatioThermistor's Temperature (˚C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(˚C

)

NTPAN4R0L Type

0.01 0.1

Current (A)

Ta=25˚C

1 10

Resistance RatioThermistor's Temperature (˚C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(˚C

)

NTPAN6R0L Type

0.01 0.1

Current (A)

Ta=25˚C

1 10

Resistance RatioThermistor's Temperature (˚C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(˚C

)

NTPAJ4R0L Type

0.01 0.1

Current (A)

Ta=25˚C

1 10

Resistance RatioThermistor's Temperature (˚C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(˚C

)

NTPAJ6R0L Type

0.01 0.1

Current (A)

Ta=25˚C

1 10

Resistance RatioThermistor's Temperature (˚C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(˚C

)

NTPAJ8R0L Type

0.01 0.1

Current (A)

Ta=25˚C

1 10

Resistance RatioThermistor's Temperature (˚C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(˚C

)

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R44E8.pdf 04.1.26

Page 32: NTC Thermistors - Mouser ElectronicsNTC Thermistors for Temperature Sensor Lead Type NT NTC Thermistors E F ±3% ±1% E1 N6 Individual Specifications Product ID Code Resistance Tolerance

Current-R Ratio (RT/R25) / Current-Temperature Characteristics (Typical)

31

6

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Continued from the preceding page.

NTPAJ100L Type

0.01 0.1

Current (A)

Ta=25˚C

1 10

Resistance RatioThermistor's Temperature (˚C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(˚C

)

NTPAD3R9L Type

0.01 0.1

Current (A)

Ta=25˚C

1 10

Resistance RatioThermistor's Temperature (˚C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(˚C

)

NTPAD5R1L Type

0.01 0.1

Current (A)

Ta=25˚C

1 10

Resistance RatioThermistor's Temperature (˚C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(˚C

)

NTPAD8R0L Type

0.01 0.1

Current (A)

Ta=25˚C

1 10

Resistance RatioThermistor's Temperature (˚C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(˚C

)

NTPAD160L Type

0.01 0.1

Current (A)

Ta=25˚C

1 10

Resistance RatioThermistor's Temperature (˚C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(˚C

)

NTPAA2R2L Type

0.01 0.1

Current (A)

Ta=25˚C

1 10

Resistance RatioThermistor's Temperature (˚C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(˚C

)

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R44E8.pdf 04.1.26

Page 33: NTC Thermistors - Mouser ElectronicsNTC Thermistors for Temperature Sensor Lead Type NT NTC Thermistors E F ±3% ±1% E1 N6 Individual Specifications Product ID Code Resistance Tolerance

Current-R Ratio (RT/R25) / Current-Temperature Characteristics (Typical)

32

6

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Continued from the preceding page.

NTPAA3R9L Type

0.01 0.1

Current (A)

Ta=25˚C

1 10

Resistance RatioThermistor's Temperature (˚C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(˚C

)

NTPAA5R1L Type

0.01 0.1

Current (A)

Ta=25˚C

1 10

Resistance RatioThermistor's Temperature (˚C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(˚C

)

NTPAA8R2L Type

0.01 0.1

Current (A)

Ta=25˚C

1 10

Resistance RatioThermistor's Temperature (˚C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(˚C

)

NTPAA100L Type

0.01

0.1

1

10

0.01 0.1 1 10

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

tem

pera

ture

(°C

)

1

10

100

1000

Resistance RatioThermistor's Temperature

Ta=25°C

Current (A)

NTPA9160L Type

0.01

0.1

1

10

0.01 0.1 1 10

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

tem

pera

ture

(°C

)

1

10

100

1000

Resistance RatioThermistor's Temperature

Ta=25°C

Current (A)

NTPA74R0L Type

0.01 0.1

Current (A)

Ta=25˚C

1 10

Resistance RatioThermistor's Temperature (˚C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(˚C

)

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R44E8.pdf 04.1.26

Page 34: NTC Thermistors - Mouser ElectronicsNTC Thermistors for Temperature Sensor Lead Type NT NTC Thermistors E F ±3% ±1% E1 N6 Individual Specifications Product ID Code Resistance Tolerance

Current-R Ratio (RT/R25) / Current-Temperature Characteristics (Typical)

33

6

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Continued from the preceding page.

NTPA78R0L Type

0.01 0.1

Current (A)

Ta=25˚C

1 10

Resistance RatioThermistor's Temperature (˚C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(˚C

)

NTPA7160L Type

0.01 0.1

Current (A)

Ta=25˚C

1 10

Resistance RatioThermistor's Temperature (˚C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(˚C

)

NTPA7220L Type

0.01 0.1

Current (A)

Ta=25˚C

1 10

Resistance RatioThermistor's Temperature (˚C)

10

1

0.1

0.01

1000

100

10

1

Res

ista

nce

Rat

io (

Rt/R

25)

The

rmis

tor's

Tem

pera

ture

(˚C

)

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R44E8.pdf 04.1.26

Page 35: NTC Thermistors - Mouser ElectronicsNTC Thermistors for Temperature Sensor Lead Type NT NTC Thermistors E F ±3% ±1% E1 N6 Individual Specifications Product ID Code Resistance Tolerance

for Inrush Current Suppression Lead Type !Caution / Notice

34

6

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Caution (Storage and Operating Conditions)1. This product is designed for the Switching Power Supply with smoothing capacitors. Other applications of this product may result in fire.2. Use this product within the specified maximum current. Otherwise it may catch fire in the worst case.3. Use this product with smoothing capacitor within the specified maximum capacitance value. Otherwise it may catch fire in the worst case.4. This product is designed for application in an ordinary environment (normal room temperature, humidity and atmospheric pressure). Do not use under the following conditions because

all these factors can deteriorate the product characteristics cause of failure and burn-out. (1) Corrosive gas or deoxidizing gas (Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) (2) Volatile or flammable gas (3) Dusty conditions (4) Under high or low pressure (5) Wet or humid conditions (6) Places with salt water, oils, chemical liquids or organic solvents (7) Strong vibrations (8) Other places where similar hazardous conditions exist

!Caution (Others)Be sure to provide an appropriate fail-safe function on your product to prevent secondary damages that may be caused by the abnormal function or the failure of our product.

Notice (Storage and Operating Conditions)To keep solderability of product from declining, thefollowing storage condition is recommended.1. Storage condition: Temperature -10 to +40 degree C Humidity less than 75%RH (not dewing condition)2. Storage term: Use this product within 6 months after delivery by first-in and first-out stocking system.

3. Handling after unpacking: After unpacking, reseal product promptly or store it in a sealed container with a drying agent.4. Storage place: Do not store this product in corrosive gas (sulfuric acid gas, chlorine gas, etc.) or in direct sunlight.

Notice (Rating)Use this product within the specified temperature range.Higher temperature may cause deterioration of the characteristics or the material quality of this product.

Notice (Soldering and Mounting)1. Be sure that the preheat-up does not melt the soldering of this product. Excessive heat may cause failure to open, short or insulation break down.2. Do not touch the body with soldering iron. The soldering point should be min. 5mm away from the root of lead wire.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R44E8.pdf 04.1.26

Page 36: NTC Thermistors - Mouser ElectronicsNTC Thermistors for Temperature Sensor Lead Type NT NTC Thermistors E F ±3% ±1% E1 N6 Individual Specifications Product ID Code Resistance Tolerance

for Inrush Current Suppression Lead Type !Caution / Notice

35

6

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Notice (Handling)1. When this product is operated, temperature of some area may be about 160 (degree C). Use proper surrounding parts and material which withstand such temperature. If they are inadequate and kept at high temperature for long time, they may be deteriorated or may produce harmful gas. And, such harmful gas may deteriorate the element of this product.2. The ceramic element of this product is fragile, and

care must be taken not to load an excessive press-force or not to give a shock at handling. Such forces may cause cracking or chipping to the element.3. Do not apply an excessive force to the lead wire. Otherwise, it may cause break off junction between lead wire and element, or may crack element. So, fix lead wire of element side when lead wire is bent or cut.

Notice (Others)1. This products need sufficient cool off time to recover high resistance. Repeated ON-OFF may cause over specified current rating. Make sure inrush current do not exceed the specified ratings even at the worst condition. (maximum abient temperature and the shortest off time.)2. The resin coating of this product does not guarantee insulating. Keep an adequate insulating distance to surrounding parts.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R44E8.pdf 04.1.26

Page 37: NTC Thermistors - Mouser ElectronicsNTC Thermistors for Temperature Sensor Lead Type NT NTC Thermistors E F ±3% ±1% E1 N6 Individual Specifications Product ID Code Resistance Tolerance

for Inrush Current Suppression Lead Type Package

36

6

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Minimum Quantity

Part NumbersMinimum Quantity (pcs.)

BulkAmmo pack

NTPA7 1000 100

NTPA9 1000 100

NTPAA 750 100

NTPAD 400 100

NTPAJ - 100

NTPAN - 100

NTPAD/NTPAA Series

Pitch of Component

Pitch of Sprocket Hole

Lead Spacing

Length from Hole Center to Lead

Length from Hole Center to Component

Body Diameter

Deviation along Tape, Left or Right

Carrier Tape Width

Position of Sprocket Hole

Lead Distance between Reference and Bottom Planes

Height of Component

Overflow of Lead

Diameter of Sprocket Hole

Lead Diameter (Sn-Plated Cu Wire)

Total Tape Thickness

Total Thickness, Tape and Lead Wire

Deviation across Tape

Portion to cut in Case of Defect

Hole Down Tape Width

Hole Down Tape Position

Coating Extension on Lead

P

P0

F

P1

P2

D

∆S

W

W1

H0

H2

I

D0

d

t1

t2

∆h1, ∆h2

L

W0

W2

e

30.0

15.0±0.3

7.5±0.5

7.5±1.5

3.75±1.0

(refer to the table below)

Thickness T (refer to the table below)

±2.0

18.0±0.5

16.0±0.5

Max. 10.0

W0.5 to Y6.0

4.0±0.1

0.8±0.05

0.6±0.3

Max. 2.0

Max. 2.0

Min. 11.5

Max. 4.0

to line A

CodeItem Dimensions (mm)

9.0±0.5

11.0+0–2.0

NTPAD

NTPAA

Type D T

16.0 max. 5.5 max.

12.0 max. 5.0 max.

W0

W2

W

W1

H0

H2

∆h2∆h1

e

∆SP2 P

D

P1

P0

F d

l

øD0

L

t2 t1

T

A

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R44E8.pdf 04.1.26

Page 38: NTC Thermistors - Mouser ElectronicsNTC Thermistors for Temperature Sensor Lead Type NT NTC Thermistors E F ±3% ±1% E1 N6 Individual Specifications Product ID Code Resistance Tolerance

for Inrush Current Suppression Lead Type Package

37

6

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Continued from the preceding page.

NTPA7/NTPA9 Series

Pitch of Component

Pitch of Sprocket Hole

Lead Spacing

Length from Hole Center to Lead

Length from Hole Center to Component

Body Diameter

Deviation along Tape, Left or Right

Carrier Tape Width

Position of Sprocket Hole

Lead Distance between Reference and Bottom Planes

Height of Component

Overflow of Lead

Diameter of Sprocket Hole

Lead Diameter (Sn-Plated Cu Wire)

Total Tape Thickness

Total Thickness, Tape and Lead Wire

Deviation across Tape

Portion to cut in Case of Defect

Hole Down Tape Width

Hole Down Tape Position

Coating Extension on Lead

P

P0

F

P1

P2

D

∆S

W

W1

H0

H2

I

D0

d

t1

t2

∆h1, ∆h2

L

W0

W2

e

12.7

12.7±0.3

5.0

6.35±1.3

3.85±0.8

(refer to the table below)

Thickness T Max. 5.0

±1.5

18.0±0.5

16.0±1.0

Max. 6.0

W0.5 to Y4.0

4.0±0.3

0.6±0.05

0.6±0.3

Max. 2.0

Max. 1.5

Min. 11.0

Max. 4.0

to line A

CodeItem Dimensions (mm)

9.0

11.0+0–2.0

+0.8–0.3

+0.5–0.75

W0

W2

W

W1

H0

H2

∆h2∆h1

e

∆SP2 P

D

A

P1

P0

F d

l

øD0

L

t2 t1

T

Type D

11.0 max

9.0 max.

NTPA9

NTPA7

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R44E8.pdf 04.1.26

Page 39: NTC Thermistors - Mouser ElectronicsNTC Thermistors for Temperature Sensor Lead Type NT NTC Thermistors E F ±3% ±1% E1 N6 Individual Specifications Product ID Code Resistance Tolerance

Head Office2-26-10, Tenjin Nagaokakyo-shi, Kyoto 617-8555, Japan Phone: 81-75-951-9111

International Division3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan Phone: 81-3-5469-6123 Fax: 81-3-5469-6155 E-mail: [email protected]

http://www.murata.com/

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note R44E8.pdf 04.1.26

Note:1. Export Control

<For customers outside Japan>Murata products should not be used or sold for use in the development, production, stockpiling or utilization of any conventional weapons or mass-destructiveweapons (nuclear weapons, chemical or biological weapons, or missiles), or any other weapons.<For customers in Japan>For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is requiredfor export.

2. Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especiallyhigh reliability for the prevention of defects which might directly damage to a third party's life, body or property, or when one of our products is intended for usein applications other than those specified in this catalog.q Aircraft equipment w Aerospace equipmente Undersea equipment r Power plant equipmentt Medical equipment y Transportation equipment (vehicles, trains, ships, etc.)u Traffic signal equipment i Disaster prevention / crime prevention equipmento Data-processing equipment !0 Application of similar complexity and/or reliability requirements to the applications listed in the above

3. Product specifications in this catalog are as of October 2003. They are subject to change or our products in it may be discontinued without advance notice.Please check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives orproduct engineers.

4. Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

5. This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications ortransact the approval sheet for product specifications before ordering.

6. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effectof our and/or a third party's intellectual property rights and other related rights in consideration of your use of our products and/or information described orcontained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentionedabove under licenses without our consent.

7. No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process.