nurses training program

MANIPAL HOSPITAL,VIJAYAWADA

CARE & HANDLING OF MEDICAL EQUIPMENT

TBS India Telematic and Biomedical Services Pvt Ltd

Medical Equipment

Designed to aid in the diagnosis, monitoring or treatment of medical conditions

Medical Equipment handling by Nurses

Syringe pumps (ICU, WARDS, OT)

Infusion pumps (ICU, WARDS, OT)

Monitors (ICU, WARDS, OT)

Bi-pap /C-pap (ICU, WARDS)

Ventilators (ICU)


Major Physical damages may happen if not taken care…..…

Electrical hazards

Fluid Spillage

Accidental falling down

Restless patient

Carelessness\Improper usage


Electrical Hazard

May lead to entire\partial damage of equipment, and if not taken care properly can lead to major fire hazard.

SymptomsBurning smellSmokeExplosion sound

How to avoid…Always connect a 3 pin power chord to ensure patient and operator safetyCheck the power chord skin for any peeling off.Check for Strain reliefEnsure chord properly connected to equipmentDo not use a multiple receptacleEnsure that AC plug is proper, if it is loose from wall inform electrical department before connecting the equipment.Try to avoid using an electrical extension box


Unfortunately If it happens…..

Remove the equipment from the patient

Disconnect from mains

Inform Biomedical and electrical department


Fluid Spillage

“If water or any fluid spillage went inside the equipment it can cause

short circuit which then leads to damage of the equipment.”

How to Avoid…..

Do not keep any fluid containers over any equipment.

Keep IV sets away from the equipments.


Infusion Pump

•OPTIMA VS


CLEANING

Do not rinse or wipe surfaces

Do not place in an AUTOCLAVE nor IMMERSE the device

Use a cloth soaked in DETERGENT-DISINFECTANT, previously diluted with water if required

Take care also with ALCOHOL BASED SPRAYS (20% - 40% alcohol). They lead to tarnishing and small cracks in the plastic casing.


Storage

should be stored in a dry and cool placeIn case of prolonged storage time, disconnect the battery through the battery door located on the rear panel . This operation should be made by biomedical engineer

OperationWhile in use ensure that No IV sets are connected straight above the unit, as it may cause fluid spilage and damage the machine or cover the unit with water proof material.

Ensure that clamps are properly fixed.Ensure that power cord are connected properly


Things to check before start using the equipments…….

Examine the unit for overall conditionChassis/Housing

MountScrew and brackets that attach the unit to an IV pole should be secure and functioning. If the device is mounted on a stand or cart, examine the condition of the mount. Also examine the pole, stand, or cart.

AC Plug/Receptacles

Examine the AC power plug for damage

Line Cord

Inspect the cord for signs of damage. If damaged, replace the entire cord .


Cables

Inspect drop sensors and remote air-inline detector cables for general condition

Fittings/Connectors

Not applicable

Electrodes/Transducers

Check their physical condition

Controls/Switches

Examine all controls and switches for physical condition, secure mounting, and correct motion


Syringe Pumps

Injectomat agilia


Ventilators

Hamilton GalileoPhilips V200Datex ohmeda Engstrom care


Do not…………

Place anything over the unit…

Move or shift while break is on…

Clean with alcoholic solvants….

Disconnect any cables and accessories before shifting……

Do’s…

Always connect to mains power source…

Ensure brake is on while operation….

Always connect proper power chord…

Don’t use multiple multiple receptacles….

Always connect a 3 pin power chord as it ensures the operator

and patient safety……

Ensure proper length of power chords….


Patient MonitorMajor parts1: SpO2 2: ECG3: NIBP4: IBP5: Temperature6: EtCO2

Do not remove any accessories forcibly…..

Do not wipe the screen with alcoholic solution…….

Ensure accessories are not getting damaged by patients…..

Always keep accessorie properly…….


Nagaraju . B TBS-India, Manipal Hospital.

nurses training program

Documents