obsolete fastener specialist fastener specialist. 2 ... dia pitch per 300mm length ... a 55 degree...
TRANSCRIPT
2 All prices include GST
C
lassic Fasten
ers
CLASSIC FASTENERS was established circa 1988 to supply 'obsolete' and just plain hard to get fasteners to restorers of automobiles and motorcycles via a mail order service. The business changed hands in November 1998 and is now based in Adelaide, owned and run by the Milne family.
All prices in this catalogue include GST.
Our ABN is 68 056 601 532
Derek & Leanne Milne
Contact Details Address Shop 1, 75-77 Grange Road Welland Postal Address PO Box 187 WELLAND SA 5007 Tel (08) 7127 0582
Email: [email protected]
Web: www.classicfasteners.com.au
3 All prices include GST
C
lassic Fa
sten
ers
TERMS AND CONDITIONS OF SALE
Risk Free Guarantee
If you are not fully satisfied with any of our products, return it to us within 60 days and we will happily offer you the following options: 1) A replacement 2) A full refund on the product 3) A different product in exchange
May 2018 Catalogue
Orders can be placed via our Online store, Telephone, Post or E-mail, Payment is accepted by Visa, MasterCard, Direct Deposit, cheque or money order. Cheques and money orders should be made payable to “Classic Fasteners.” Postage and packing charges for orders delivered in Australia are as follows Orders up to $40.00 - Standard Australia Post $8.75 Orders up to $40.00 - Express Post $11.35 Orders between $40.01 and $150 - Express Post $16.40 Orders over $150.01 - Signature required $18.95 Overseas orders by quotation. Every attempt will be made to hold the prices to those shown in this catalogue, but we reserve the right to alter or amend prices at any time without prior notice. All prices include 10% GST. Overseas customers deduct 1/11th from the prices listed All effort will be made to dispatch orders within five working days of receipt. If we cannot do so (for example an item is temporarily out of stock) we will contact you, quoting a delivery date. If this date is unacceptable, a refund may be obtained any time prior to dispatch.
ORDERS PAYMENT
PACKING and POSTAGE PRICES TAXES DELIVERY
4 All prices include GST
C
lassic Fasten
ers
Index
Bolts BA ....................................... 7 BSCY ................................ 11 BSF ..................................... 8 Metric ................................ 12 UNC .................................. 16 UNF .................................. 14 Bumper Bolts ........................................ 7 Flanged Bolts ..................................... 18 Hardware & Tools Clevis Pins ........................ 81 Clutch Locking Tools ......... 83 EZI Sizer ........................... 83 Grease Nipples ................. 82 P Clips - rubber lined ........ 82 Spanners .......................... 84 Split Pins ........................... 81 Thread Gauges ................. 83 Thread Reapir Inserts ....... 85 Metal Thread Screws Cheese head ..................... 33 Countersunk ...................... 29 Fillister ............................... 32 Pan Head .......................... 35 Round ............................... 38 Raised Countersunk ......... 27 Nails Brass ................................. 70 Copper .............................. 71 Roves ................................ 72 Nuts Cage ................................. 52 Castle ................................ 50 Dome ................................ 51 Flange ............................... 49 Standard Hex .................... 40 Half (lock) .......................... 47 Manifold ............................ 45 Nylon Insert Lock Nuts ...... 48 Reduced Hex .................... 46 Slotted ............................... 50 Square .............................. 43
Self Tapping Screws Automotive—SEMS ........... 63 Countersunk ...................... 60 Pan Head .......................... 62 Raised Countersunk ......... 61 Truss washer head ............ 63 Socket Head (Allen) Screws Button Head....................... 24 Cap Screws ....................... 21 Countersunk ...................... 25 Special Application Products ............... 79 Studs ..................................................... 6 Taps, Dies and associated tools ......... 86 Threaded Rod ....................................... 5 Trimming Supplies Tenax Fasteners ................ 73 LOXX ................................. 74 Washers Countersunk Trim .............. 59 Cup .................................... 59 Flat .................................... 53 Flanged Cup ...................... 49 Nylon ................................. 53 Red Fibre ........................... 53 Spring ................................ 56 Lock ................................... 58 Wood Screws Countersunk ...................... 64 Raised ............................... 67 Round ................................ 68 Workshop Fastener Packs .................. 17
5 All prices include GST
ST
UD
S &
TH
RE
AD
ED
RO
D
Cla
ssic Faste
ne
rs Threaded Rod
The following rods are threaded for their entire length and are ideal for cutting up as required.
BSF STAINLESS304
Dia tpi per 1 foot length
1/4 26 $20.005/16 22 $22.003/8 20 $25.00
BSCY (CEI) STAINLESS304
Dia tpi per 1 foot length
5/16 26 $23.303/8 26 $28.251/2 26 $28.00
UNF STAINLESS304
Dia tpi per 1 foot length
1/4 28 $18.005/16 24 $22.003/8 24 $25.20
METRIC - Course STAINLESS304
Dia pitch per 300mm length
6mm 1.00mm $5.00
6 All prices include GST
ST
UD
S &
TH
RE
AD
ED
RO
D
Classic F
asteners
Studs
BSCY - 26tpi studs. On shorter length studs thread length is approximately 3/4”, the longer studs are threaded approximately 1”.
Dia Length tpi Each
1/4” 3” 26 $3.753 1/2” $4.104” $4.454 1/2” $4.85
5/16” 3” 26 $4.653 1/2” $5.404” $6.954 1/2” $6.655” $8.155 1/2" $8.056” $9.10
3/8” 3 1/2” 26 $6.554” $8.604 1/2” $8.405” $8.605 1/2” $9.256” $10.007” $11.258” $12.50
7/16” 4” 26 tba4 1/2” $10.555” tba5 1/2" $11.706" $13.357" $14.908" $17.40
1/2” 4 1/2” 26 $13.505" tba6" $16.506 1/2 tba7" $17.709" $22.60
BSCYSTAINLESS
303
7 All prices include GST
BO
LTS
& S
ET
SC
RE
WS
C
lassic Fasten
ers
BA - British Association
Bumper (Cup Head) Bolts
Mirror polished heads. Set screws are threaded their entire length. Length is measured from under the head.
Stainless Steel. Mirror polished head. Supplied with stainless nut and spring washer to suit
STAINLESS STAINLESS CHROME304 304 High Tensile
Length Polished Head HeadDia AF inches Each Each Each2 BA 0.325" 1/2 Set screw $1.00 tba tba
3/4 Set screw tba tba7/8 $1.30
1 Set screw $2.15 $2.15
DIN603 STAINLESSPolished Head
Dia Pitch (mm)
Head diameter
Head height
LengthEach
M6 1.00 16mm 3.5mm 20mm $1.5525mm $1.5530mm $1.70
M8 1.25 20mm 4.8mm 20mm $2.30
25mm $2.4530mm $2.2540mm $2.75
M10 1.50 24mm 5.4mm 25mm $3.10
30mm $3.1540mm $3.4050mm $3.90
UN STAINLESSPolished Head
Head diameter
Head height
LengthEach
10-32 UNF 0.392" 0.125" 5/8" $4.00 To suit MGA grille
8 All prices include GST
BO
LTS
& S
ET
SC
RE
WS
C
lassic Fasten
ers
BSF - Zinc plated
Steel, bright zinc plated Length is measured from under the head. Bolts have a section of shank unthreaded. Set screws are threaded for their entire length.
LengthDia AF inches Each per 25 Each per 25
3/16 0.325" 1/2 Set screw $1.05 $19.753/4 Set screw $1.05 $19.75
1 Set screw
1 1/2 Bolt
2 Set screw $1.40
1/4 0.438" 3/8 Set screw $1.00 $18.751/2 Set screw $0.85 $16.003/4 Set screw $0.95 $17.75
1 Set screw $1.02 $19.251 1/4 Bolt $1.35 $25.251 1/2 Bolt $1.65 $31.001 3/4 Set screw $0.80 $14.001 3/4 Bolt $1.80 $33.752 Bolt $2.00 $37.502 1/4 Bolt $2.15 $40.352 1/2 Bolt $2.50 $47.002 3/4 Bolt $2.40 $45.003 Bolt $2.94 $15.253 1/2 Bolt $3.50 $65.754 Bolt $2.90
5/16 0.520" 1/2 Set screw $0.95 $17.753/4 Set screw $1.45 $27.25 $0.85
1 Set screw $1.60 $30.001 1/4 Bolt $1.75 $32.751 1/2 Bolt $2.10 $39.501 3/4 Bolt $2.00 $37.502 Bolt $2.50 $47.00 $1.85 $34.002 1/4 Bolt $1.90 $35.002 1/2 Bolt $2.95 $55.25 $2.40 $45.002 3/4 Bolt $3.003 Bolt $3.20 $60.003 1/2 Bolt $4.20 $78.754 Bolt $4.80 $90.00
HIGH TENSILE GRADE RZINC platedMILD STEEL
ZINC plated
9 All prices include GST
BO
LTS
& S
ET
SC
RE
WS
C
lassic Fasten
ers BSF - Zinc plated
BSF—continued
Dia AF Length Each per 25 Each per 253/8 0.595" 1/2 Set screw $1.30 $24.50
3/4 Set screw $1.45 $27.251 Set screw $2.00 $37.501 1/4 Bolt $2.20 $41.251 1/2 Set screw $2.50 $47.001 1/2 Bolt $2.60 $48.752 Bolt $3.05 $57.252 1/4 Bolt $3.40 $63.752 1/2 Bolt $5.20 $97.50 $2.85 $543 Bolt $4.00 $75.003 1/2 Bolt $5.55 $104.004 Bolt $6.00 $112.50 $4.50 $854 1/2 Bolt $13.506 Bolt
7/16 0.705" 3/4 Set screw $4.50 $84.501 Set screw $3.651 1/4 Set screw $3.251 1/2 Set screw $4.50 $2.90 $551 1/2 Bolt $4.802 Bolt $5.00 $93.752 1/2 Bolt $6.102 3/4 Bolt $3.003 Set screw $6.703 1/2 Bolt $7.604 Bolt $10.75
1/2 0.820" 1 Set screw $3.001 1/2 Set screw
1 1/2 Bolt $4.102 Set screw $0.952 Bolt $5.702 1/2 Bolt $8.253 Bolt $8.253 1/2 Bolt $8.50 $212.504 Bolt $10.00
3/4 2 1/2 Set screw $3.00
7/8 2 1/2 Set screw $3.303 Set screw $3.804 Set screw $4.30
HIGH TENSILE GRADE R MILD STEELZINC plated ZINC plated
10 All prices include GST
BO
LTS
& S
ET
SC
RE
WS
C
lassic Fasten
ers
BSF - Stainless & Chrome
1/4” BSCY vs 1/4” BSF 1/4” BSF is interchangeable with 1/4” BSCy. Both have 26 tpi, the difference being BSF has
a 55 degree thread angle and BSCy has a 60 degree thread angle.
Chrome plated—Top face of heads mirror polished. Stainless—choose between standard markings or mirror polished head. Length is measured from under the head.
STAINLESS STAINLESS CHROME304 High Tensile
Length Polished Head Grade RAF inches Each Each Each
3/16 0.325" 1/2 Set screw Use 2 BA Use 2 BA
3/4 Set screw Use 2 BA Use 2 BA1 Set screw Use 2 BA Use 2 BA
1/4 0.438" 1/2 Set screw $1.90 $2.90 $2.005/8 Bolt $2.703/4 Set screw $2.75 $3.20 $2.207/8 Set screw $2.20
1 Set screw $2.55 $3.55 $2.551 1/4 Set screw $3.90 $2.401 1/2 Set screw $4.101 1/2 Bolt $2.752 Bolt $3.203 Bolt $3.90
5/16 0.520" 3/4 Set screw $5.00 $3.201 Set screw $5.20 $3.651 1/4 Set screw $4.001 1/2 Set screw $6.20 $3.952 Set screw $6.902 Bolt $5.102 1/2 Bolt $6.903 Bolt $6.453 1/2 Bolt $7.104 Bolt $8.50
3/8 0.595" 5/8 Set screw $2.503/4 Set screw $4.40
1 Set screw $4.151 1/4 Set screw $4.701 1/2 Set screw $5.002 Bolt $5.852 1/2 Bolt $7.253 Bolt $8.25
11 All prices include GST
BO
LTS
& S
ET
SC
RE
WS
C
lassic Fasten
ers BSCY (CEI, Cycle, 26tpi)
Stainless and Chrome plated bolts have had their heads individually polished to a mirror finish. Length is measured from under the head. Set screws are threaded all the way to the head; bolts are partially threaded.
STAINLESS STAINLESS
304 Polished CHROMEAF Length Each Each Each per 25
1/4
5/16 0.520" 1/2 Set screw $1.20 $22.503/4 Set screw $4.90 $4.00 $1.25 $23.50
1 Set screw $4.25 $5.25 $4.35 $1.30 $24.501 1/4 Set screw $5.80 $4.251 1/2 Set screw $1.40 $26.251 1/2 Bolt $6.00 $5.102 Set screw $1.65 $30.952 Bolt $6.002 1/2 Bolt $6.803 Set screw $2.00 $37.503 Bolt $6.503 1/2 Bolt $7.353 3/4 Bolt $7.954 Bolt $8.20
3/8 0.595" 3/4 Set screw $5.40 $4.20 $1.65 $31.001 Set screw $5.00 $5.80 $3.80 $1.80 $33.751 1/4 Set screw $6.601 1/4 Bolt $4.501 1/2 Set screw $6.95 $5.65 $2.00 $37.501 3/4 Bolt $6.002 Set screw $2.25 $42.202 Bolt $6.352 1/2 Bolt $6.903 Set screw $3.10 $58.253 Bolt $11.103 1/2 Bolt $9.753 3/4 Bolt $10.704 Bolt $11.55
Reduced Head Size - made on 1/4 BS hex size
5/16 0.438" 3/4 Set screw $1.20 $22.50
MILD STEEL
USE 1/4 BSFUSE 1/4 BSF
ZINC plated
USE 1/4 BSF
12 All prices include GST
BO
LTS
& S
ET
SC
RE
WS
C
lassic Fasten
ers
Metric Coarse
Depending upon availability we may substitute grade 316 for grade 304 stainless steel. Chrome set screws are high tensile. Length is measured from under the head.
IMPORTANT - PLEASE READ Metric bolts in M4, M5, M6, M7 and M8 diameters are generally suitable for both European and Japanese cars and motorcycles. However, M10 in the standard 1.50 pitch and M12 1.75 pitch are only suitable as replacements on European machines. They will not fit Japanese vehicles which use a 1.25 pitch fine thread. We can supply 1.25mm fine pitch bolts to order in chrome plate or stainless steel.
DIN 933 Set Screws STAINLESSDIN 931 Bolts Length Polished Head
Pitch AF inches Each Each Per 100 Each Per 100M3 0.50mm 5.5mm 6mm Set screw
8mm Set screw
10mm Set screw
M4 0.70mm 7mm 8mm Set screw
10mm Set screw
12mm Set screw
M5 0.80mm 8mm 12mm Set screw $0.26 $13.0016mm Set screw $0.22 $11.00
M6 1.00mm 10mm 12mm Set screw $0.20 $10.00 $0.30 $15.0016mm Set screw $0.20 $10.00 $0.30 $15.0020mm Set screw $0.22 $11.00 $0.32 $16.0025mm Set screw $0.26 $13.00 $0.34 $17.0030mm Set screw $0.28 $14.00 $0.35 $18.0035mm Set screw $0.45 $23.0040mm Bolt $0.38 $18.00 $0.45 $23.0045mm Bolt $0.60 $30.0050mm Bolt $0.46 $23.0055mm Bolt $0.5060mm Bolt $0.46 $23.0070mm Bolt $0.6580mm Bolt $0.72
M7 1.00mm 11mm 25mm Set screw $4.7530mm Set screw $4.9050mm Bolt $5.9570mm Bolt $5.75
M8 1.25mm 13mm 16mm Set screw $0.40 $20.00 $0.52 $26.0020mm Set screw $0.56 $28.0025mm Set screw $0.50 $25.00 $0.76 $38.0030mm Set screw $0.52 $26.00 $0.70 $35.0035mm Bolt $0.74 $37.0040mm Bolt $0.46 $23.00 $0.76 $38.0045mm Bolt $0.56 $28.0050mm Bolt $0.80 $40.0055mm Bolt $0.85 $64.0060mm Bolt $0.78 $39.00
M10 1.50mm 17mm 20mm Set screw $0.6825mm Set screw $0.7035mm Set screw $0.8545mm Bolt $1.0550mm Bolt $1.2060mm Bolt $1.42
STAINLESS304
STAINLESS316
13 All prices include GST
BO
LTS
& S
ET
SC
RE
WS
C
lassic Fasten
ers Metric Fine
High tensile grade 8.8 Silver zinc plated
Length High tensile
Dia Pitch AF inches Each
M8 1.00mm 13mm 25mm Set screw $0.60
NutsM8 1.00mm 13mm $0.25
14 All prices include GST
BO
LTS
& S
ET
SC
RE
WS
C
lassic Fasten
ers
UNF
Zinc plated bolts are silver zinc plated unless YZ is indicated. Chrome have their heads mirror polished. Chrome are a minimum HIGH TENSILE strength of SAE grade 5. Length is measured from under the head.
STAINLESS CHROMELength 304 High Tensile
AF inches Each Each Each per 50 Each per 10010-32 5/16" 1/2 Set screw $0.80
3/4 Set screw $0.70
1/4 7/16" 1/2 Set screw $0.75 $1.45 $0.17 $4.505/8 Set screw $0.17 $4.503/4 Set screw $0.75 $1.55 $0.22 $11.00
1 Set screw $0.85 $1.65 $0.26 $13.001 1/4 Bolt $0.21 $6.00 $0.28 $14.001 1/2 Set screw $1.951 1/2 Bolt $1.15 $0.22 $6.00 $0.28 $14.001 3/4 Bolt $1.80 $0.20 $5.502 Bolt $1.60 $0.36 $18.002 1/4 Bolt $0.47 $13.002 1/2 Bolt $0.52 $14.50 $0.60 $30.002 3/4 Bolt $0.653 Bolt $0.70 $0.78 $39.00
5/16 1/2" 1/2 Set screw $1.00 $1.605/8 Set screw $0.30 $7.50 $0.30 $15.00 YZ3/4 Set screw $1.19 $1.75 $0.30 $7.50 $0.37 $19.00
1 Set screw $1.35 $1.95 $0.44 $22.001 1/4 Set screw tba $0.45 $23.001 1/2 Set screw $2.601 1/2 Bolt $2.25 $0.32 $0.46 $23.002 Bolt $2.87 $0.72 $36.002 1/4 Bolt $0.522 1/2 Bolt $3.00 $0.74 $20.50 $1.10 $55.003 Bolt $0.86 $23.50 $1.30 $65.00
3/8 9/16" 3/4 Set screw $2.02 $1.95 $0.47 $24.001 Set screw $1.95 $2.20 $0.52 $26.001 1/8 Set screw $1.35 YZ1 1/4 Set screw $0.63 $32.001 1/4 Bolt $3.001 1/2 Set screw $2.20 $2.751 1/2 Bolt $0.70 $35.002 Bolt $3.95 $3.30 $0.89 $45.002 1/4 Bolt $3.80 $0.502 1/2 Bolt $4.45 $4.00 $0.73 $20.00 $1.442 3/4 Bolt $4.503 Bolt $1.35 $68.003 1/2 Bolt $1.95
YZ = Yellow Zinc Cr6
ZINC platedGrade 5 Grade 8
15 All prices include GST
BO
LTS
& S
ET
SC
RE
WS
C
lassic Fasten
ers UNF
LengthAF inches Each per 25 Each per 50 per 25
7/16 1 1/4 Set screw $1.30 $32.501 1/2 Set screw $1.40 $35.001 3/4 Bolt $1.50 $37.502 Bolt $1.80 $45.002 1/2 Bolt $1.80 $45.003 Bolt $2.55 $63.753 1/2 Bolt $1.75 $22.00 $2.55 $32.004 Bolt $2.75 $34.50
ZINC platedGrade 5 Grade 8
16 All prices include GST
BO
LTS
& S
ET
SC
RE
WS
C
lassic Fasten
ers
UNC
Stainless Steel is generally Grade 304/A2, however we do substitute with 316 dependant on availability Length is measured from under the head.
CAUTION Stainless steel is NOT high tensile and should not be used in applications where high tensile bolts are required (eg. Brakes and suspensions).
LUBRICATION As stainless steel bolts and nuts are supplied totally degreased it is recommended that some lubrication be used on assembly.
Diameter Pitch Length High Tensile Grade 8
tpi AF inches Each Per 100 Each Per 100 Each per 100
1/4 7/16" 1/2 Set screw $0.32 $16 $0.40 $20.003/4 Set screw $0.40 $20.00
1 Set screw $0.40 $20.001 1/2 Bolt $0.44 $331 3/4 Bolt $0.46 $352 Bolt $0.42 $322 1/2 Bolt $0.55 $422 3/4 Bolt $0.60 $45
5/16 1/2" 1/2 Set screw $0.50 $25.00 $0.30 $15.003/4 Set screw $0.50 $38
1 Set screw $0.64 $32.001 1/4 Set screw $0.55 $421 1/2 Bolt $0.86 $43.002 Bolt $0.68 $512 1/4 Bolt $0.90 $682 3/4 Bolt $1.25 $944 1/2 Bolt $2.00
3/8 9/16" 3/4 Set screw $0.69 $521 Set screw $0.75 $571 1/4 Set screw $0.75 $571 1/2 Bolt $0.82 $621 3/4 Bolt $1.20 $902 Bolt $0.90 $682 1/4 Bolt $1.35 $1022 1/2 Bolt $1.35 $1022 3/4 Bolt $1.40 $105
Each per 507/16 14 5/8" 3/4 Set screw
1 Set screw $0.90 $22.501 1/2 Set screw $0.90 $22.502 Bolt $1.00 $25.002 1/2 Bolt $1.10 $27.50
316304STAINLESSSTAINLESS ZINC plated
18 All prices include GST
BO
LTS
& S
ET
SC
RE
WS
C
lassic Fasten
ers
Flange Bolts - Metric
Hex Flanged Bolts 8mm AF Grade 8.8 Zinc
SKU Dia Pitch AF Length Fully threaded each per 50BFMZ8612 M6 1.00 8mm 12mm Yes $0.60 $15.00BFMZ8616 M6 1.00 8mm 16mm Yes $0.65 $16.50BFMZ8620 M6 1.00 8mm 20mm Yes $0.65 $16.50BFMZ8625 M6 1.00 8mm 25mm Yes $0.70 $17.50
Metric Hex Flanged Bolts Grade 8.8
SKU Dia Pitch AF Length Fully threaded each per 50BFMZ816 M8 1.25 12mm 16mm Yes $0.80 $20.00BFMZ820 M8 1.25 12mm 20mm Yes $0.85 $21.50BFMZ825 M8 1.25 12mm 25mm Yes $0.90 $22.50BFMZ830 M8 1.25 12mm 30mm Yes $1.05 $26.50BFMZ840 M8 1.25 12mm 40mm Yes $1.25 $31.50BFMZ850 M8 1.25 12mm 50mm Yes $1.40 $35.00
Metric FINE Hex Flanged Bolts Grade 8.8
SKU Dia Pitch AF Length Fully threaded each per 50BFMFZ1025 M10 1.25 14mm 25mm Yes $1.45 $36.50BFMFZ1030 M10 1.25 14mm 30mm Yes $1.60 $40.00BFMFZ1035 M10 1.25 14mm 35mm Yes $1.75 $44.00BFMFZ1040 M10 1.25 14mm 40mm Yes $1.95 $49.00
Metric Hex Serrated Flanged Bolts Stainless A2-304SKU Dia Pitch AF Length Fully threaded each per 50BFMS616 M6 1.00 10mm 16mm Yes $1.10 $27.50BFMS620 M6 1.00 10mm 20mm Yes $1.20 $30.00BFMS625 M6 1.00 10mm 25mm Yes $1.35 $34.00BFMS630 M6 1.00 10mm 30mm Yes $1.45 $36.50
All M6 but with a smaller 8mm A/F. This small range is often sort after by the motor cycle industry. In the preferred zinc clear finish
Yellow Zinc, Non-serrated
Yellow Zinc, Non-serrated
19 All prices include GST
BO
LTS
& S
ET
SC
RE
WS
C
lassic Fasten
ers
BSCY—26tpi Mild Steel Pack Silver zinc plated 430 items $127.00
BSF High Tensile Pack BS Grade R high tensile Silver zinc plated 375 items $160.00
Qty Description Diameter Length
6 Set Screw 1/4 1/210 Set Screw 1/4 3/46 Set Screw 1/4 14 Bolt 1/4 1 1/22 Bolt 1/4 22 Bolt 1/4 2 1/22 Bolt 1/4 3
2 Set Screw 5/16 1/26 Set Screw 5/16 3/46 Set Screw 5/16 14 Set Screw 5/16 1 1/22 Set Screw 5/16 2
2 Set Screw 3/8 3/42 Set Screw 3/8 12 Set Screw 3/8 1 1/22 Set Screw 3/8 22 Set Screw 3/8 3
30 Std Hex Nut 1/425 Std Hex Nut 5/1615 Std Hex Nut 3/84 Std Hex Nut - 26 tpi 7/162 Std Hex Nut - 26 tpi 1/2
5 Nylon Insert Lock Nut 1/4
5 Half Nuts 1/45 Half Nuts 5/165 Half Nuts 3/8
50 Flat Washers 1/450 Flat Washers 5/1620 Flat Washers 3/810 Flat Washers 7/166 Flat Washers 1/2
50 Spring Washers 1/450 Spring Washers 5/1620 Spring Washers 3/810 Spring Washers 7/166 Spring Washers 1/2
430 Total items in pack
Qty Description Diameter Length
6 Set Screw 1/4 1/210 Set Screw 1/4 3/410 Set Screw 1/4 14 Bolt 1/4 1 1/22 Bolt 1/4 22 Bolt 1/4 2 1/22 Bolt 1/4 3
8 Set Screw 5/16 3/48 Set Screw 5/16 16 Bolt 5/16 1 1/24 Bolt 5/16 22 Bolt 5/16 2 1/22 Bolt 5/16 3
4 Set Screw 3/8 14 Set Screw 3/8 1 1/22 Bolt 3/8 22 Bolt 3/8 2 1/22 Bolt 3/8 3
30 Std Nut 1/430 Std Nut 5/1615 Std Nut 3/8
8 Nylon Insert Lock Nut 1/48 Nylon Insert Lock Nut 5/164 Nylon Insert Lock Nut 3/8
40 High Tensile Flat Washer 1/440 High Tensile Flat Washer 5/1620 High Tensile Flat Washer 3/8
40 Spring Washer 1/440 Spring Washer 5/1620 Spring Washer 3/8
375 Total items in pack
Workshop Packs
20 All prices include GST
BO
LTS
& S
ET
SC
RE
WS
C
lassic Fasten
ers
Workshop Packs
UNF Stainless Steel Pack Stainless steel grade 304
240 items $96.00
UNF High Tensile Pack SAE Grade 5 or higher Silver zinc plated 450 items $65.00
Depending upon availability we will substitute 316 for 304
Qty Description Diameter Length
4 Set Screw 1/4" 1/2"10 Set Screw 1/4" 3/4"10 Set Screw 1/4" 1"2 Bolt 1/4" 1 1/2"2 Bolt 1/4" 2"
4 Set Screw 5/16" 1/2"6 Set Screw 5/16" 3/4"6 Set Screw 5/16" 1"4 Set Screw 5/16" 1 1/2"2 Bolt 5/16" 2"
4 Set Screw 3/8" 3/4"4 Set Screw 3/8" 1"2 Bolt 3/8" 2"
25 Std Nut 1/4"20 Std Nut 5/16"10 Std Nut 3/8"
6 Nylon Insert Lock Nut 1/4"5 Nylon Insert Lock Nut 5/16"4 Nylon Insert Lock Nut 3/8"
25 Flat Washer 1/4"20 Flat Washer 5/16"10 Flat Washer 3/8"
25 Spring Washer G316 1/4"20 Spring Washer G316 5/16"10 Spring Washer 3/8"
240 Total items in pack
Qty Description Diameter Length
10 Set Screw 1/4 1/210 Set Screw 1/4 3/410 Set Screw 1/4 16 Bolt 1/4 1 1/26 Bolt - Grade 8 1/4 24 Bolt - Grade 8 1/4 2 1/22 Bolt 1/4 3
10 Set Screw 5/16 3/410 Set Screw - Grade 8 5/16 16 Set Screw - Grade 8 5/16 1 1/46 Bolt - Grade 8 5/16 1 1/24 Bolt - Grade 8 5/16 24 Bolt 5/16 2 1/22 Bolt 5/16 3
6 Set Screw - Grade 8 3/8 3/45 Set Screw - Grade 8 3/8 13 Bolt 3/8 1 1/22 Bolt - Grade 8 3/8 22 Bolt 3/8 2 1/22 Bolt 3/8 3
48 Std Nut - Grade 8 1/442 Std Nut - Grade 8 5/1620 Std Nut 3/8
14 Nylon Insert Lock Nut 1/410 Nylon Insert Lock Nut 5/166 Nylon Insert Lock Nut 3/8
40 High Tensile Flat Washer 1/440 High Tensile Flat Washer 5/1620 High Tensile Flat Washer 3/8
40 Spring Washer 1/440 Spring Washer 5/1620 Spring Washer 3/8
450 Total items in pack
21 All prices include GST
BO
LTS
& S
ET
SC
RE
WS
C
lassic Fasten
ers Workshop Packs
UNC Stainless Steel Pack Stainless steel grade 304
240 items $45.00
METRIC Stainless Steel Pack Stainless steel grade 304 230 items $37.00
Depending upon availability we will substitute 316 for 304
Qty Description Diameter Length
4 Set Screw 1/4 1/26 Set Screw 1/4 3/44 Set Screw - G316 1/4 14 Bolt 1/4 1 1/22 Bolt 1/4 22 Bolt 1/4 2 3/4
4 Set Screw - G316 5/16 1/26 Set Screw 5/16 3/44 Set Screw 5/16 14 Bolt - G316 5/16 1 1/22 Bolt 5/16 22 Bolt 5/16 2 3/4
4 Set Screw 3/8 3/42 Set Screw 3/8 12 Set Screw 3/8 1 1/42 Bolt 3/8 22 Bolt 3/8 2 3/4
22 Std Nut 1/422 Std Nut 5/1612 Std Nut 3/8
6 Nylon Insert Lock Nut 1/46 Nylon Insert Lock Nut 5/164 Nylon Insert Lock Nut 3/8
22 Flat Washer 1/422 Flat Washer - G316 5/1612 Flat Washer 3/8
22 Spring Washer - G316 1/422 Spring Washer - G316 5/1612 Spring Washer 3/8
240 Total items in pack
Qty Description Diameter Length10 Countersunk - phillips 316 M4 12mm
8 Pan head screw - phillips M5 10mm8 Pan head screw - phillips M5 16mm8 Pan head screw - phillips M5 20mm
8 Pan head screw - phillips M6 10mm
6 Set screw M5 16mm
8 Set screw M6 12mm8 Set screw M6 16mm8 Set screw M6 20mm6 Set screw M6 25mm4 Set screw M6 30mm2 Bolt M6 40mm
6 Set screw M8 20mm4 Set screw M8 25mm4 Bolt 316 M8 35mm2 Bolt M8 45mm
10 Standard nut M510 Standard nut M610 Standard nut 316 M8
2 Nylon insert lock nut M56 Nylon insert lock nut M64 Nylon insert lock nut M8
4 Flange nut M58 Flange nut M66 Flange nut M8
10 Flat washer 316 M510 Flat washer M610 Flat washer 316 M8
10 Mudguard washer M6
10 Spring washer 316 M510 Spring washer M610 Spring washer 316 M8
230 Total items in pack
22 All prices include GST
HE
X S
OC
KE
T S
CR
EW
S
Classic F
asteners
Length is measured from under head.
Cap Head
METRIC - CoarseDIN 912
Dia Pitch Length Each Per 100 Per 50 Each Per 100
M2 4mm6mm8mm
M3 6mm8mm
10mm
M4 0.70mm 10mm $0.14 $7.00 $0.26 $13.0012mm $0.16 $8.00 $0.26 $13.0016mm $0.34 $17.0020mm $0.20 $10.00 $0.30 $15.00
M5 0.80mm 10mm $0.18 $9.00 $0.28 $14.0012mm $0.30 $15.0016mm $0.22 $0.30 $15.0020mm $0.22 $11.00 $0.34 $17.0025mm $0.46 $23.0030mm $0.34 $17.0035mm $0.40 $20.00 $0.50 $25.00
M6 1.00mm 12mm $0.22 $11.00 $0.44 $22.0016mm $0.46 $23.0020mm $0.28 $14.00 $0.40 $20.0025mm $0.42 $21.0030mm $0.58 $29.0035mm $0.42 $21.0040mm $0.44 $0.54 $27.0050mm $0.54 $0.70 $35.0055mm $1.8060mm $0.76 $38.00
M7 1.00mm 25mm $4.0030mm $4.30
M8 1.25mm 16mm $0.48 $22.0020mm $0.80 $40.0025mm $0.84 $42.0030mm $0.80 $0.95 $48.0035mm $0.84 $44.0040mm $0.94 $1.24 $62.0050mm $1.16 $58.0060mm $1.40 $35.00
316STAINLESSSTAINLESS
304
23All prices include GST
HE
X S
OC
KE
T S
CR
EW
S
Classic F
asteners
Cap Head
M10 Fine Thread (1.25 pitch)
METRIC - FINE STAINLESSDIN 304Dia Pitch Length Each
M10 1.25mm 25mm $8.6035mm $9.0050mm $9.5070mm tba
100mm $15.45
M10 1.50mm pitch socket cap screws are not usually used on Japanese motorcycles. Use the 1.25mm fine pitch screws below that have been specially made for this purpose.
24 All prices include GST
HE
X S
OC
KE
T S
CR
EW
S
Classic F
asteners
Cap Head Length is measured from under head.
BSF STAINLESS CHROME304
Dia Length Each Each Each Per 100 Each Per 100
1/4” BSF 1/2 $2.65 $1.60 $0.70 $53.003/4 $1.95 $0.857/8 $2.10
1 $4.95 $2.10 $1.051 1/4 $4.95 $2.301 1/2 $2.701 3/4 $2.802 $2.952 1/4 $3.352 1/2 $5.70 $4.152 3/4 $4.703 $5.30
5/16” BSF 3/4 $2.751 $2.752 $4.55
3/16” BSF and 2BA are interchangeable
BA STAINLESS CHROME304
Size Thread Length Each Each
2 BA 3/8” $2.25 $1.401/2” $2.40 $1.305/8” $1.653/4” $3.05 $1.40
1” $1.551 1/2” $1.95
2” $2.65
High TensileZinc
High TensileBlack Oxide
BSWBS 2470
Dia Length Each Per 50 Per 100
1/4” BSW 1 $0.40 $15.00 $20.001 1/4 $0.42 $16.00 $22.001 1/2 $0.60 $22.50 $30.001 3/4 $0.60 $22.50 $30.002 $0.50 $19.00
5/16” BSW 1 1/4 $0.54 $20.502 $0.68 $20.50
High TensileZinc
25All prices include GST
HE
X S
OC
KE
T S
CR
EW
S
Classic F
asteners
Cap Head
Length is measured from under the head.
10-24 UNC and 3/16 BSW are interchangeable
Unified NationalANSI B18.3 1960
Dia Length Each Per 25 Per 50 Per 100
6-32 UNC 3/8 $0.26 $13.001/2 $0.28 $14.003/4 $0.34 $17.00
1 1/4 $0.64 $32.00
8-32 UNC
10-24 UNC 1/2 $0.27 $16.003/4 $0.31 $19.00
1 1/2 $0.45 $27.00
10-32 UNF 1/2 $0.76 $53.003/4 $0.85 $60.00
1 $0.97 $68.001 1/4 $1.00 $70.00
1/4” - 20 UNC 1/2 $0.27 $19.003/4 $0.35 $21.00
1 $0.39 $23.001 1/4 $0.44 $26.001 1/2 $0.53 $32.001 3/4 $0.60 $36.002 $0.63 $38.002 1/2 $1.06 $32.002 3/4 $1.103 $1.50 $45.00
1/4” - 28 UNF 1/2 $0.97 $68.003/4 $1.07 $75.00
1 $1.20 $84.00
5/16” -18 UNC 3/4 $0.54 $33.001 $0.57 $34.001 3/4 $0.83 $50.002 $0.90 $27.00
5/16" -24 UNF 3/4 $1.60 $56.001 $1.77 $62.001 1/4 $1.90 $33.251 3/4 $2.10 $36.75
STAINLESS304
26 All prices include GST
HE
X S
OC
KE
T S
CR
EW
S
Classic F
asteners
Workshop Packs
Metric Socket Cap Screw Pack - Stainless Steel Stainless steel grade 304 unless indicated
130 items $28.00
Depending upon availability we will substitute 316 for 304
Qty Description Diameter Length Grade6 Socket cap screw M5 10mm6 Socket cap screw M5 16mm 3166 Socket cap screw M5 20mm
8 Socket cap screw M6 12mm8 Socket cap screw M6 16mm 3168 Socket cap screw M6 20mm6 Socket cap screw M6 25mm 3164 Socket cap screw M6 30mm 3162 Socket cap screw M6 40mm
6 Socket cap screw M8 20mm 3164 Socket cap screw M8 25mm 3164 Socket cap screw M8 30mm
4 Standard Nut M54 Standard Nut M64 Standard Nut M8 316
5 Flat washer M55 Flat washer M65 Flat washer M8 316
5 Mudguard Washer M55 Mudguard Washer M6
10 Spring Washer M510 Spring Washer M6 3165 Spring Washer M8
130 Total items in pack
Note: Stainless steel fasteners are supplied totally degreased. As such, a lubricant should be used to ensure correct tensioning of the fastener. Products such as Loctite 771 or a threadlocking agents Loctite 222 or 243 are all suitable.
27All prices include GST
HE
X S
OC
KE
T S
CR
EW
S
Classic F
asteners
Countersunk
Length is measured from top of head.
UNCANSI B18.3
Dia Length Each Per 100
10-24 UNC 1/2” $0.35 $21.001" $0.45 $27.00
1/4” UNC 1/2” $0.45 $27.001” $0.49 $34.00
1 1/4” $0.70 $42.00
5/16” UNC 2” $2.10 $126.00
METRIC - CoarseDIN 7991
Dia Pitch Length Each Per 100 Each Per 100 Each Per 100
M5 0.80mm 12mm $0.14 $7.0020mm $0.32 $16.0025mm $0.38 $19.00
M6 1.00mm 16mm $0.20 $10.0020mm $0.18 $9.0025mm $0.20 $10.0030mm $0.20 $10.0035mm $0.28 $14.00
M8 1.25mm 20mm $0.46 $23.00
STAINLESS316
304
STAINLESS304
High TensileG12.9 Zinc
STAINLESS
28 All prices include GST
HE
X S
OC
KE
T S
CR
EW
S
Classic F
asteners
Button Head
Length is measured from under head.
UNC
Dia Length Each Per 100
10-24 UNC 3/4” $0.651” $0.65
1/4” UNC 1/2” $0.44 $31.003/4” $0.48 $34.00
1” $0.50 $25.00
METRIC - CoarseISO 7380
Dia Pitch Length Each Per 100 Each Per 100
M4 0.70mm 16mm $0.20 $10.00
M5 0.80mm 12mm $0.26 $13.00
20mm $0.66 $33.0025mm $0.48 $25.00
M6 1.00mm 12mm $0.22 $11.00 $0.36 $18.0016mm $0.22 $11.00 $0.46 $23.0020mm $0.40 $20.0025mm $0.28 $14.00 $0.50 $25.0030mm $0.34 $17.00 $0.50 $25.00
M8 1.25mm 20mm $0.40 $20.00 $0.64 $32.0025mm $0.50 $25.0030mm $0.90 $45.0035mm $0.60 $30.00 $0.86 $43.00
STAINLESS
STAINLESS304
STAINLESS316304
29 All prices include GST
MA
CH
INE
SC
RE
WS
C
lassic Fasten
ers Raised Countersunk, Slot
STEEL, SLOTTED
Length is measured from edge of head.
BA CHROMELength Each per 100 Each per 50 Each
2 BA 1/2 $0.40 $30.00 $0.505/8 $1.65 $1.303/4 $0.45 $34.00 $1.50 $1.45
1 $1.90 $1.60
3 BA 1/2 $1.80 $67.503/4 $1.85 $69.50
4 BA 3/4 tba
6 BA 3/4 $0.35
BSWDia Length Each Each per 100
1/8 BSW 1/2 $0.40 $20.001 $0.50 $0.46 $23.00
3/16 BSW 2 $1.15
1/4 BSW 1 tba1 3/4 $3.40
UNDia Length Each per 50 Each per 50
6-32 UNC 1/2 $0.30 $11.503/4 $0.35 $13.00
8-32 UNC 3/8 $0.35 $13.001/2 tba3/4 $0.50 $19.00
1 tba
10-24 UNC 1/2 $0.653/4 $0.50 $19.00
1 $0.80 $30.00
10-32 UNF 1/2 tba5/8 tba3/4 $0.50 $19.00
1 tba
12-24 UNC 1/2 $0.50 $17.50 $1.10
1/4 - 20 UNC 1 $1.90
ZINC plated STAINLESS
ZINC plated STAINLESS
ZINC plated STAINLESS
30 All prices include GST
MA
CH
INE
SC
RE
WS
C
lassic Fasten
ers
Raised Countersunk, Phillips/POZI
STEEL, PHILLIPS or POZI drive
Length is measured from edge of head.
UNDia Length Each Each per 50
6-32 UNC 1/2 $0.30 $7.50
8-32 UNC 3/8 $0.30 $7.501/2 $0.30 $7.50
1 $0.30 $11.25
10-24 UNC 1/2 $0.40 $15.00
10-32 UNF 1/2 $0.30 $11.255/8 $0.50 $12.503/4 $0.55 $14.00
1 $0.60 $15.00
12-24 UNC 1/2 $0.50 $19.00
5/16 - 24 UNF 1 $2.35
METRIC - CoarseDIN 966
Dia Length Each per 100
M4 12mm $0.12 $6.00
M5 20mm $0.18 $9.0025mm $0.20 $10.0030mm $0.30 $15.00
M6 20mm $0.20 $10.0025mm $0.24 $12.00
304
ZINC plated STAINLESS
STAINLESS
31 All prices include GST
MA
CH
INE
SC
RE
WS
C
lassic Fasten
ers Countersunk - Slot
STEEL, SLOTTED HEAD Length is measured from the top of the head.
BRASS, SLOTTED DRIVE Length is measured from the top of the head.
BA
Dia Length Each Each
2 BA 2" $0.15
6 BA 1/4" $0.10
Un-plated Nickel platedBRASS
BSWDia Length Each per 100 Each per 100
1/8 BSW 1/2 $0.20 $15.00
5/32 BSW 1 1/4 $0.30 $23.00
3/16 BSW 1/2 $0.10 $8.00 $0.25 $19.003/4 $0.16 $8.00
1 $0.45 $34.00
1/4 BSW 1/2 $0.14 $11.003/4 $0.27 $20.25
1 $0.20 $15.00
5/16 BSW 3/4 $0.41 $31.0012
3/8 BSW 11 1/4 $0.20
BSFDia Length Each per 25
1/4 BSF 1/2 $0.70 $13.253/4 $1.05 $19.75
1 $1.05 $19.751 1/2 $1.50 $28.252 $1.50 $28.25
5/16 BSF 3/4 $1.35 $25.251 $2.25 $42.252 $1.90 $35.75
3/8 BSF 1 $1.85 $34.75
ZINC plated STAINLESS
ZINC plated
32 All prices include GST
MA
CH
INE
SC
RE
WS
C
lassic Fasten
ers
Countersunk - Slot
STEEL, SLOTTED HEAD Length is measured from the top of the head.
BALength Each per 100 per 200
2 BA 1/2 $0.42 $32.00 $42.003/4 $0.50 $38.00 $50.00
1 $0.55 $41.00 $56.001 1/2 $1.00 $50.00
4 BA 5/16 $0.22 $11.001/2 $0.24 $18.005/8 tba3/4 $0.44 $33.00 $44.00
6 BA 3/16 tba1/4 $0.15 $11.003/8 $0.15 $11.001/2 $0.24 $18.005/8 $0.15 $11.00
1 $0.29 $22.00
UNDia Length Each per 50 per 100 Each per 50
6-32 UNC 1/2 $0.30
8-32 UNC 1/2 $0.30 $11.25
10-32 UNF 1/2 $0.20 $7.50 $0.40 $15.003/4 $0.25 $9.50 $0.45 $17.00
12-24 UNC 1/2 $0.305/8 $0.303/4 $0.35
1 $0.40
1/4 - 20 UNC 1/2 $0.453/4 $0.28 $14.00
1/4 - 28 UNF 3/4 $0.70 $17.501 $0.95 $35.50 tba1 1/2 $1.25 $47.00
5/16 - 24 UNF 3/4 $1.60 $60.001 $1.70 $64.00
STAINLESSZINC plated
ZINC plated
33 All prices include GST
MA
CH
INE
SC
RE
WS
C
lassic Fasten
ers
STEEL, PHILLIPS or POZI DRIVE Length is measured from the top of the head.
Countersunk - Phillips
METRIC - CoarseDIN 965H
Dia pitch Length Each per 200 Each per 100 Each per 100 per 200
M4 0.70 8mm $0.05 $0.10 $10.0010mm $0.12 $6.0012mm $0.05 $5.00 $0.12 $6.0020mm35mm $0.22 $11.00
M5 0.80 10mm $0.20 $10.0016mm $0.24 $12.0020mm $0.26 $13.00
UNDia Length Each per 200 Each per 50 per 100
6-32 UNC 1/4 $0.17 $26.001/2 $0.20 $30.00 $0.24 $12.003/4 $0.22 $34.00 $0.26 $13.00
8-32 UNC 1/2 $0.21 $32.003/4 $0.26 $13.00
10-32 UNF 5/16 $0.20 $10.001/2 $0.20 $5.003/4 $0.26 $13.00
1
12-24 UNC 1/2 $0.35 $13.50 $18.003/4 $0.50 $12.50
1 $0.60 $15.001 1/2 tba
1/4 - 28 UNF 3/4 $0.90 $22.501 tba $1.05 $26.251 1/2 $1.70 $42.50
5/16 - 24 UNF 1 tba
BSWDia Length Each per 100
3/16 BSW 1 1/2 $0.50
STAINLESS
ZINC plated
ZINC plated
STAINLESS304
STAINLESS
STAINLESS316
34 All prices include GST
MA
CH
INE
SC
RE
WS
C
lassic Fasten
ers
Fillister
STEEL, SLOTTED HEAD Length is measured from under the head.
STEEL, PHILLIPS HEAD
UNF
Dia Length Each per 50
10-32 UNF 1/2" $0.50 $19.00
ZINC plated
UN
Dia Length Each per 50 Each per 50
8-32 UNC 3/8 $0.355/8 $0.20 $7.50
10-24 UNC 1” $0.20 $7.50
10-32 UNF 5/8” $0.45 $17.003/4” tba tba
1” tba
12-24 UNC 1/4" $1.553/8" $1.253/4” $1.10
1” $1.25
1/4-20 UNC 3/4” $0.75 $28.001” $0.75 $28.00 tba
1/4-28 UNF 3/4” tba
ZINC plated STAINLESS304
35 All prices include GST
MA
CH
INE
SC
RE
WS
C
lassic Fasten
ers Cheese Head - Slot
BRASS, SLOTTED HEAD Length is measured from under head.
STEEL, SLOTTED HEAD Stainless and Chrome screws have polished heads. Length is measured from under head.
BA
Size Thread Each per 50
2 BA 5/16 $0.40 $14.001/2 $0.55 $19.505/8 $0.40 $14.003/4 $0.40 $14.00
1 $0.45 $16.00
4 BA 5/16 $0.32 $11.001/2 $0.32 $11.003/4 $0.32 $11.00
1 $0.37 $13.00
6 BA 1/4 $0.25 $9.001/2 $0.31 $11.003/4 $0.31 $11.00
1 $0.39 $13.50
8 BA 1
BRASSUn-plated
BSFPolished head Plain
Dia Length Each per 100 Each Each
1/4 BSF 1/2” $2.653/4” $1.751” $1.60 $1.801 1/2 $2.252” $2.352 1/2" $3.10
STAINLESSZINC plated
36 All prices include GST
MA
CH
INE
SC
RE
WS
C
lassic Fasten
ers
Cheese Head - Slot
STEEL, SLOTTED HEAD Stainless and Chrome screws below have polished heads. Length is measured from under head.
BA STAINLESS CHROME
Length Each per 100 Each Each
2 BA 3/8 $0.30 $15.00 $1.151/2 $0.42 $21.00 $0.75 $1.203/4 $0.50 $38.00 $0.80 $1.35
1 $0.55 $41.00 $0.951 1/41 1/2 $1.00 $50.00
3 BA 1/2 tba tba3/4 $0.35 $26.00 $1.35
4 BA 5/16 $0.25 $12.501/2 $0.24 $18.005/8 tba3/4 $0.30 $23.00
1 $0.27 $20.001 1/4 $0.20 $15.001 1/2 $0.37 $28.00
6 BA 1/4 $0.15 $11.003/8 $0.15 $11.001/25/8 $0.15 $11.003/4 $0.27 $20.00
1 $0.29 $22.00
BSW STAINLESS CHROMEPolished head
Dia Length each per 200 Each Each
3/16 BSW 1/2” $1.153/4” $0.18 $18.001” $0.18 $18.002” $0.20
1/4 BSW 1/2” $0.24 $24.00 $1.25 $1.653/4” $0.26 $26.00 $1.60 $1.851” $0.32 $32.00 $1.85 $2.101 1/4” $2.001 3/8 $2.351 1/2” $2.15 $2.251 3/4” $2.25 $2.452” $2.50 $2.602 1/2” $3.203” $3.70
ZINC plated
ZINC plated
37 All prices include GST
MA
CH
INE
SC
RE
WS
C
lassic Fasten
ers Pan Head, Phillips
STEEL, PHIILIPS or POZI HEAD
Length is measured from under the head.
UN
Dia Length Each per 100 per 200 Each per 25 per 50
6-32 UNC 1/4" $0.30 $23.00 $30.001/2" $0.34 $26.00 $34.003/4" $0.38 $29.00 $38.007/8” $0.30 $11.501” $0.40 $30.00 $40.00 $0.351 1/2” $0.43 $32.00 $44.00
8-32 UNC 1/2" $0.35 $26.00 $35.003/4" $0.40 $20.001” $0.40 $20.001 1/2 $0.42 $21.00
10-24 UNC 3/8” $0.101/2" $0.101” $0.15
10-32 UNF 3/8” $0.30 $11.501/2” $0.38 $29.00 $38.00 $0.40 $10.005/8” $0.35 $14.003/4" $0.40 $30.00 $40.001” $0.45 $17.001 1/2 $0.44 $33.00 $44.00
12-24 UNC 1/4" $0.703/8" $0.851/2" $0.26 $0.46 $11.505/8” $0.55 $14.003/4” tba $0.65 $16.501 $0.60 $22.50
1/4 UNF 3/4 $1.251 $1.75 $22.00
1 1/4 $2.15 $27.00
ZINC plated STAINLESS304
38 All prices include GST
MA
CH
INE
SC
RE
WS
C
lassic Fasten
ers
Pan Head, Phillips
STEEL, PHIILIPS or POZI HEAD
Length is measured from under the head.
METRIC - CoarseDIN 7985Dia pitch Length per 25 per 200 Each per 100 Each per 100 per 200M2 0.40mm 5mm $0.22 $15.00
M3 0.50mm 8mm $0.10 $10.0010mm $0.10 $10.0012mm $0.12 $12.0016mm $0.14 $7.0020mm $0.16 $8.0025mm $0.18 $9.00
50mm $0.44 $22.00
M4 0.70mm 10mm $0.12 $6.00 $0.16 $8.0012mm $0.14 $7.00 $0.18 $9.0016mm $0.14 $7.00 $0.18 $9.0020mm $0.24 $12.0025mm $0.24 $12.0030mm $0.34 $17.0040mm $0.52 $26.0050mm $0.54 $27.00
M5 0.80mm 10mm $1.65 $10.00 $0.19 $9.50 $0.24 $12.0012mm $0.20 $10.00 $0.26 $13.0016mm $1.75 $11.00 $0.24 $12.00 $0.30 $15.0020mm $1.95 $12.00 $0.24 $12.00 $0.30 $15.0025mm $0.40 $20.0050mm $0.70 $35.00
M6 1.00mm 10mm $1.95 $12.00 $0.30 $15.0025mm $0.32 $16.00 $0.68 $34.00
ZINC plated STAINLESS304
STAINLESS316
39 All prices include GST
MA
CH
INE
SC
RE
WS
C
lassic Fasten
ers
STEEL, SLOTTED HEAD
Length is measured from under the head.
Pan Head, Slot
BA
Length Each per 100
2 BA 1/2 $0.25 $19.00
UN
Dia Length Each per 50 Each per 100
8-32 UNC 1/22 1/4
10-32 UNF 1/4 $0.36 $18.003/8 $0.30 $11.501/2 tba5/8 tba
ZINC plated STAINLESS304
ZINC plated
40 All prices include GST
MA
CH
INE
SC
RE
WS
C
lassic Fasten
ers
Round Head
STEEL, X-RECESS HEAD Length is measured from under head.
UN STAINLESS304
Dia Length Each per 100 Each
12-24 UNC 1/2” 40c tba
1/4 UNF 1/2” tba1” tba
ZINC plated
BRASS, SLOTTED HEAD Length is measured from under head.
BANickel plated
Size Thread Each per 50 Each
0 BA 1/2” $0.10
8 BA 5/8” $0.60 $23.00
Un-platedBRASS
41 All prices include GST
MA
CH
INE
SC
RE
WS
C
lassic Fasten
ers Round Head - Slot
STEEL, SLOTTED Length is measured from under head.
BA STAINLESS CHROME304
Length Each per 100 Each Each
2 BA 1/2 $0.30 $15.00 $1.55 $1.153/4 $0.35 $25.00 $0.95 $1.25
1 $1.451 1/2 $0.35 $25.00
3 BA 1/2 $1.75
4 BA 5/16 $0.13 $9.001/2 $0.13 $9.005/8 $0.13 $9.003/4 $0.14 $10.00
1 1/4 $0.15
6 BA 3/8 $0.13 $9.001/2 $0.13 $9.005/8 $0.13 $9.00
1 $0.15 $11.00
BSF STAINLESS CHROME304
Dia Length Each per 25 Each Each
1/4 BSF 1 $1.15 $21.501 1/2 $1.50 $28.252 $2.00 $37.50
BSW
Dia Length Each per 100
1/8 BSW 1/2 $0.20 $15.001 $0.25 $19.00
5/32 BSW 3/4 $0.25 $19.001 $0.30 $23.00
3/16 BSW 3/4 $0.30 $23.00
UN
Dia Length Each per 100
6-32 UNC 5/8 $0.258-32 UNC 1/2 $0.35 $26.00
10-32 UNF 1/2 $0.30 $23.001 $0.35 $26.00
1/4-20 UNC 1 1/4 $0.60 $45.00
1/4-28 UNF 3/4 tba1 $2.20
STAINLESS304
STAINLESS304
ZINC plated
ZINC plated
42 All prices include GST
NU
TS
C
lassic Fasten
ers
Standard Hex Nuts - Steel
All zinc plated full nuts are silver zinc plated.
BA Standard Nuts STAINLESS CHROME304
tpi Each per 100 Each Each
6 BA 47.9 $7.005 BA 43.0 $0.16 $12.004 BA 38.5 $0.10 $8.003 BA 34.8 $0.21 $15.002 BA 31.4 $0.10 $8.00 $0.50 $0.851 BA 28.2 $0.34 $24.000 BA 25.4 $0.30 $23.00
ZINC plated
BSF Standard Nuts STAINLESS CHROME304
tpi AF Each per 100 Each Each
3/16 BSF 32 $0.20 $15.00 Use 2BA Use 2BA
1/4 BSF 26 0.445" $0.28 $21.00 $0.45 $1.105/16 BSF 22 0.520" $0.35 $26.00 $0.80 $1.203/8 BSF 20 0.595" $0.37 $28.00 $1.20 $1.457/16 BSF 18 0.710" $1.201/2 BSF 16 0.812" $1.16 $2.659/16 BSF 16 0.916" tba5/8 BSF 14 1.000" tba $5.00 $4.203/4 BSF 12 $4.007/8 BSF 11 1.295" $5.00
BSF Standard Nuts
tpi AF Each per 50
1/4 BSF 26 0.445" $0.95 $35.505/16 BSF 22 13mm $1.20 $45.00
BSW Standard Nuts
tpi AF each per 200 Each per 200
1/8 BSW 40 0.220" $0.06 $6.00 $0.26 $26.005/32 BSW 32 0.248" $0.08 $8.00 $0.26 $26.003/16 BSW 24 0.324" $0.08 $8.00 $0.26 $26.001/4 BSW 20 0.445" $0.10 $10.005/16 BSW 18 0.525" $0.15 $16.00 $0.253/8 BSW 16 0.600" $0.28 $28.00
ZINC plated
ZINC platedHigh Tensile Grade R
STAINLESS304
ZINC plated
43 All prices include GST
NU
TS
C
lassic Fasten
ers Standard Hex Nuts - Steel
BSCY thread is used on many English motorbikes and bicycles from circa 1900 through to the 1960’s. Satin chrome has an appearance similar to cadmium plate with greater durability than zinc plate.
* Height of 7/16 - 20tpi BSCY zinc nuts is 0.310” which is thinner than the standard minimum height of 0.365”
BSCY (CEI) Standard Nuts STAINLESS CHROME304
tpi AF Each per 50 Each Each
1/4 BSF 26 0.445"
5/16 BSCY 26 0.520" $0.65 $24.50 $2.60 $1.803/8 BSCY 26 0.595" $0.85 $32.00 $2.65 $2.057/16 BSCY 26 0.710" $1.30 $49.00 $5.05 $3.251/2 BSCY 26 0.812" $2.10 $79.00 $6.00 $3.859/16 BSCY 26
5/8 BSCY 26 $6.10
7/16 BSCY 20 0.710" $1.25 * $46.90 * $3.351/2 BSCY 20 0.812" $2.05 $77.00 $3.959/16 BSCY 20
5/8 BSCY 20
3/4 BSCY 20
7/8 BSCY 20
USE 1/4 BSF
ZINC plated
44 All prices include GST
NU
TS
C
lassic Fasten
ers
Standard Hex Nuts - Steel
M10 1.50mm pitch and M12 1.75mm are not normally used on Japanese motorcycles. Use 1.25mm fine pitch. Standard M10 nuts and bolts have a 17mm spanner size, the Japanese often use a smaller 14mm hex size , so please check there is sufficient clearance for the standard size hex before
METRIC - Coarse STAINLESSDIN 934
Diameter pitch AF Each per 200 Each Per 100 Per 200
M2 0.40 4mm
M3 0.50 5.5mm $0.07 $8.00M4 0.70 7mm $0.04 $2.00 $0.06 $6.00
Each per 100
M5 0.80 8mm $0.16 $8.00M6 1.00 10mm $0.12 $6.00 $0.16 $8.00M7 1.00 11mm $0.50 $25.00 $0.75 $38.00M8 1.25 13mm $0.18 $9.00 $0.24 $12.00M10 1.50 17mm $0.40 $20.00 $0.60 $30.00
METRIC - Fine ZINC ZINCSteel High Tensile
Grade 8.8
Diameter pitch AF Each per 100 Each Each
M8 1.00 13mm $0.25M10 1.25 14mm $2.85 $0.25M10 1.25 17mm $1.10 $77.00M12 1.25 19mm $2.50
STAINLESS
304
304 316
STAINLESS
45 All prices include GST
NU
TS
C
lassic Fasten
ers Standard Hex Nuts - Steel
UNF Standard Nuts
tpi Each per 100
10-32 UNF 32 $0.20 $14.001/4 UNF 28 $0.26 $13.005/16 UNF 24 $0.40 $20.003/8 UNF 24 $0.50 $25.007/16 UNF 20 $1.25
UNF Standard Nuts
tpi Each per 100 Each per 200 Each per 10010-32 UNF 32 $0.20 $15.00
1/4 UNF 28 $0.20 $10.005/16 UNF 24 $0.20 $10.003/8 UNF 24 $0.32 $16.007/16 UNF 20 $0.15 $10.00 $0.35 $0.70 $35.00
UNC Standard Nuts
tpi Each per 100 Each per 200
6-32 UNC 32 $0.14 $8.008-32 UNC 32 $0.14 $8.0010-24 UNC 24 $0.14 $8.00 $0.15 $15.0012-24 UNC 24
Each per 100 Each per 100
1/4 UNC 20 $0.18 $9.005/16 UNC 18 $0.20 $12.003/8 UNC 16 $0.26 $13.00
UNC Standard Nuts
tpi Each per 100 Each per 50 Each per 1006-32 UNC 32 $0.25 $19.008-32 UNC 32 $0.30 $23.0010-24 UNC 24
12-24 UNC 24 $0.52 $36.00Each per 50 Each per 100
1/4 UNC 20
5/16 UNC 18 $0.15 $4.00
ZINC plated ZINC platedMild Steel Grade 5
ZINC platedGrade 8
STAINLESS316
ZINC plated ZINC plated ZINC plated
STAINLESS304
Mild Steel Grade 5 Grade 8
CHROMEHigh Tensile
STAINLESS316
Each
$0.95$1.05$1.25$1.70
46 All prices include GST
NU
TS
C
lassic Fasten
ers
Standard Hex Nuts - Brass
BSF Standard Nuts
Size Thread tpi AF Each per 25
5/16 BSF 22 0.520" $0.80 $15.003/8 BSF 20 0.595" $1.05 $19.75
26tpi Standard Nuts
Size Thread AF Each per 25
3/8 Brass 26 0.595" $0.45 $8.45
BA Standard Nuts
Size Thread tpi AF Each per 20 per 100 per 25 per 100
10 BA 72.6 0.115" $7.00 $26.008 BA 59.1 0.152" $2.40 $9.007 BA 52.9 0.172" $2.80 $11.006 BA 47.9 0.187" $3.20 $12.005 BA 43.0 0.218" $4.00 $10.004 BA 38.5 0.250" $3.60 $9.00 $3.25 $10.003 BA 34.8 0.281" $6.00 $15.002 BA 31.4 0.324" $6.00 $15.00 $4.75 $14.001 BA 28.2 0.365"
0 BA 25.4 0.410" $1.00 $1.25
BRASSNickel platedUn-plated
BRASS
BRASSUn-plated
Un-plated
47 All prices include GST
NU
TS
C
lassic Fasten
ers Manifold Nuts - Brass
Metric Manifold Nuts
pitch AF Each per 10 per 25
M8 1.25mm 13mm $2.25 $16.90 $28.25
BRASSUn-plated
BSF Manifold Nuts
Size Thread tpi AF Each per 10 per 25
1/4 BSF 26 0.445" $3.55 $26.60 $44.505/16 BSF 22 0.520" $2.30 $17.30 $28.753/8 BSF 20 0.595" $2.65 $19.90 $33.25
UNF Manifold Nuts
tpi AF Each per 10 per 25
5/16” UNF 24 0.500" $2.25 $16.90 $28.253/8” UNF 24 0.562" $2.65 $19.90 $33.25
UNC Manifold Nuts
tpi AF Each per 10 per 25
5/16” UNC 18 0.500" $2.25 $16.90 $28.25
BRASSUn-plated
BRASSUn-plated
BRASSUn-plated
48 All prices include GST
NU
TS
C
lassic Fasten
ers
Reduced Hex Nuts
BSCY Reduced Hex Nuts CHROME SATIN
AF Each per 25 Each Each
1/4 BSCY 0.322" 3/16 BS size hex $0.75 $17.000.322" AF
5/16 BSCY 0.438" 1/4 size hex
Thin nut, 0.195" high $0.60 $11.25BSA Part 24-0563
5/16 BSCY 0.438" 1/4 size hex $0.70 $13.15 $1.80Std height, 0.250"
5/16 BSCY 0.438" 1/4 size hex $0.70 $13.25Tall nut, 0.345" high
3/8 BSCY 0.510" 5/16 BS size hex $2.05 $38.50Height 0.307"
High Tensile
1/2 BSCY 0.708" 7/16 BS size hex $3.95Nut height 0.377"
1/2 BSCY 0.710" 7/16 BS size hex $1.65 $31.00Nut height 0.318"
Std height 0.228"
Used on Triumph cyclinder base
ZINC plated
BSA rear wheel adjuster lock nut
Used on BSA carb & magneto flanges
Used on BSA gearbox
49 All prices include GST
NU
TS
C
lassic Fasten
ers Lock Nuts (Half Nuts) - Steel
UNC Standard Nuts
tpi AF Each per 100
1/4 UNC 20 7/16" $0.25 $18.755/16 UNC 18 9/16" $0.45 $33.75
ZINC platedMild Steel
Square Nuts
BSW and UNC are interchangeable in these sizes.
UNF Half Nuts
tpi AF Each per 10 per 50
1/4” UNF 28 0.437" $0.39 $2.90 $10.005/16” UNF 24 0.500" $0.50 $3.80 $13.003/8” UNF 24 0.562" $0.74 $5.60 $18.50
BSF Half Nuts
tpi AF Each per 10 per 50
1/4” BSF 26 0.445" $0.43 $3.20 $11.005/16” BSF 22 0.520" $0.68 $5.10 $17.003/8” BSF 20 0.595" $1.07 $8.00 $27.007/16” BSF 18 0.710" $1.38 $10.40 $34.501/2” BSF 16 0.812" $1.61 $12.10 $40.50
ZINC plated
ZINC plated
BSCY Half Nuts
tpi AF Each per 50
5/16 BSCY 26 0.520" $0.70 $26.503/8 BSCY 26 0.597" $0.90 $34.007/16 BSCY 26 0.710" $1.20 $45.00
ZINC plated
50 All prices include GST
NU
TS
C
lassic Fasten
ers
Nylon Insert Lock Nuts
BAeach per 50
2 BA $0.48 $18.00
BSCY (CEI) - 26tpitpi each per 50
5/16" BSCY 26 $3.453/8" BSCY 26 $3.80
BSF CHROMEP Type tpi each per 50 Each
1/4" BSF 26 $1.05 $39.50 $1.805/16" BSF 22 $1.25 $47.003/8" BSF 20 $0.65 $24.507/16" BSF 18 $1.451/2" BSF 16 $1.805/8" BSF 14 $3.50 $130.003/4" BSF 12 $7.051" BSF 10 $3.00
UNC
NM/NE Series tpi Each Per 100
8-32 UNC 32 $0.32 $16.0010-24 UNC 24 $0.24 $12.001/4" UNC 20 $0.22 $11.005/16" UNC 18 $0.32 $16.003/8" UNC 16 $0.44 $22.00
UNF CAD/pl
Each per 100 Each Per 100 Each
10-32 UNF $0.08 $6.00 $0.50 $26.001/4" UNF $0.18 $12.00 $0.71 $37.005/16" UNF $0.20 $15.00 $0.89 $46.005/16" UNF Thin Type $0.19 $12.003/8" UNF $0.27 $20.00 $1.19 $62.003/8" UNF Thin Type $0.30 $20.007/16" UNF $0.39 $25.007/16" UNF Thin Type $0.40 $26.001/2" UNF $0.50 $33.005/8" UNF $1.25 $62.50
9/16" UNF red fibre insert 35c
Silver Zinc
Silver Zinc
304
Silver Zinc Stainless304
Silver Zinc
Stainless
51 All prices include GST
NU
TS
C
lassic Fasten
ers
Serrated Flange Nuts
Nylon Insert Lock Nuts
METRIC - Fine ZINCSteel
Diameter pitch AF Each
M10 1.25 14mm $1.40
METRIC - Coarse DIN6923
Diameter pitch AF Each per 100
M5 0.80 8mm $0.21 $13.00M6 1.00 10mm $0.25 $13.00M8 1.25 13mm $0.48 $32.00
STAINLESS304
METRIC - Coarse
Diameter pitch each Each Per 100 Each Per 100
M3 (0.50) $0.14 $7.00M4 (0.70) $0.11 $5.50 $0.14 $7.00M5 (0.80) Thin Type $0.14 $7.00M6 (1.00) Thin Type $0.17 $9.00M8 (1.25)M8 (1.25) Thin Type $0.30 $15.00M10 (1.50) Thin Type $0.09 $0.60 $30.00
METRIC - Fine
Diameter each each
M8 (1.00) Thin Type $0.30M10 (1.25) Thin Type $0.25
CLEARANCE CLEARANCE
Yellow Zinc Stainless304
DIN 985
Stainless316
DIN 985
Yellow Zinc Silver Zinc
CLEARANCE
52 All prices include GST
NU
TS
C
lassic Fasten
ers
Slotted Nuts
Castle Nuts
BSF Slotted Nuts
tpi AF Each per 25
1/4 BSF 26 0.445" $3.00 $37.505/16 BSF 22 0.520" $2.50 $47.003/8 BSF 20 0.595" $2.50 $47.007/16 BSF 18 0.710" $3.60 $45.001/2 BSF 16 0.815" $2.85 $53.509/16 BSF 16 tba5/8 BSF 14 n/a3/4 BSF 12 1.192" $7.007/8 BSF 11 1.295" $11.15
UN Slotted Nuts
tpi AF Each per 25
1/4 UNF 28 .430" $1.00 $18.755/16 UNF 24 0.491" $1.10 $20.633/8 UNF 24 0.553" $2.007/16 UNF 20 0.679" tba1/2 UNF 20 0.741" $2.209/16 UNF 18 0.874" tba5/8 UNF 18 0.930" $4.353/4 UNF 16 tba7/8 UNF 14 1.307" $3.00
ZINC plated
ZINC plated
BSF Castle Nuts
tpi AF Each per 25
1/4 BSF 26 0.440" $3.50 $66.005/16 BSF 22 0.520" $2.90 $54.503/8 BSF 20 0.600" $4.40 $82.507/16 BSF 18 0.710" $3.00 $56.251/2 BSF 16 0.818" $5.95 $111.509/16 BSF 16 tba5/8 BSF 14 tba3/4 BSF 12 1.195" $3.50 $65.75
UNF Castle Nuts
tpi AF Each per 25
5/16 UNF 24 0.495" $0.303/8 UNF 24 $2.757/16 UNF 20 0.687" $2.301/2 UNF 20 $3.705/8 UNF 18 1.000" tba3/4 UNF 16 1.120"
7/8 UNF 14 1.305" $1.001 1/4 UNF 12 $1.00
ZINC plated
ZINC plated
53 All prices include GST
NU
TS
C
lassic Fasten
ers Dome Nuts
BA Dome Nuts CHROMEPolished
Size Thread tpi Each
2 BA 31.4 $3.35
BSCY (CEI) Dome Nuts CHROME STAINLESS
Polished 303
tpi AF Each Each1/4” BSCY 26
5/16” BSCY 26 $5.90 $4.90
3/8” BSCY 26 $6.607/16” BSCY 26 $7.801/2” BSCY 26 $7.45
BSF Dome Nuts CHROME STAINLESS
Polished 303
tpi AF Each Each1/4” BSF 26 $5.10 $5.505/16” BSF 22 $5.90 $6.40 $4.903/8” BSF 20 $6.90 $5.90
BSW Dome Nuts CHROMEPolished
tpi AF Each
1/4” BSW 20 $4.005/16” BSW 18 $4.603/8” BSW 16 $5.25
UNC Dome NutsPolished
tpi AF Each
1/4" UNC 20 $5.10
UNF Dome Nuts CHROMEPolished
tpi AF Each
1/4” UNF 28 $4.055/16” UNF 24 $5.053/8” UNF 24 $5.407/16” UNF 20 $7.501/2” UNF 20 $8.25
METRIC - Coarse CHROMEDIN1587 Polished
Two piece
Diameter pitch AF Each Each Each Per 100M6 1.00mm 10mm $3.65 $0.40 $20M8 1.25mm 13mm $4.10 $0.50 $0.80 $40M10 1.50mm 17mm $5.05
METRIC - Fine CHROMEPolished
Diameter pitch AF Each
M10 1.25mm 14mm $6.30
USE 1/4" BSF
STAINLESSPolished
Each
CLEARANCE
316One piece
STAINLESS
STAINLESS
STAINLESS304
54 All prices include GST
NU
TS
C
lassic Fasten
ers
MILD STEEL CAGE & NUT
A B C D T PriceLength Width Height Plate each
NR 1024 3/16 BSW (10-24) 38.1 13.5 8.8 0.9 $3.00NR 1420 1/4 BSW (1/4-20) 38.1 13.5 8.8 0.9 $3.50NR 51618 5/16 BSW (5/16-18) 44.5 17 10.5 1.2 $3.50NR 3816 3/8 BSW (3/8-16) 44.5 17 10.5 1.2 $3.50NR M5 M5 29.5 13.5 8.8 0.9 $3.50NR M6 M6 38.1 13.5 8.8 0.9 $3.50NR M8 M8 44.5 17 10.5 1.2 $3.50NR M10 M10 44.5 17 10.5 1.2 $3.50
FULL STAINLESS STEEL CAGE & NUT
NRS M6 M6 38.1 13.5 8.8 0.9NRS M8 M8 44.5 17 10.5 1.2 $4.50
Also refered to as "floating nut reatiners". The design allows the nut to "float" within the steel cage, which is ideal for hole misalignment and blind assembly.
mm
SKU Thread Size
Cage Nuts - Weld Type
56 All prices include GST
NU
TS
C
lassic Fasten
ers
Hex Drive Nuts
Furniture Hex Drive Insert Nuts
SKU Size Length Flanged Hex drive each Per 200
NIWZFM410 M4 10mm yes 4mm $0.30 $30.00NIWZFM510 M5 10mm yes 5mm $0.45 $45.00NIWZFM613 M6 13mm yes 6mm $0.55 $55.00NIWZFM618 M6 18mm yes 6mm $0.65 $65.00NIWZFM815 M8 15mm yes 8mm $0.80 $80.00NIWZLM818 M8 Low Profile 18mm no 8mm $0.85 $85.00
58 All prices include GST
WA
SH
ER
S
Classic F
asteners
RED FIBRE WASHERS
SKU Bolt Size O.D Gauge per 25 per 100WRF316 3/16" 7/16" 1/32" $2.00 $4.00WRF14 1/4" 1/2" 1/32" $2.50 $5.65WRF516 5/16" 5/8" 1/32" $4.00 $8.00WRF38 3/8" 3/4" 1/32" $4.25 $8.50WRF12 1/2" 1" 1/32" $5.50 $11.00
WRF516116 5/16" 5/8" 1/16" $5.00 $10.00WRF38116 3/8" 3/4" 1/16" $5.00 $10.00
WRFP Mixed pack $10.00
1/32" gauge - 3/16", 1/4", 5/16", 3/8", 1/2"1/16" gauge - 5/16", 3/8"
NYLON WASHERS
SKU O.D. Gauge(mm) (mm)
WN4 M4 7.0 0.80 $2.50 $5.00WN5 M5 (3/16”, 2BA) 11.2 0.80 $2.75 $6.00WN6 M6 (suits 1/4”) 14.0 1.00 $2.75 $6.00
Includes 10 of each of the following:
Sizeper 25 per 100
BRASSBolt Size O.D. Gauge per 503BA .34" 21 $2.508BA .183" 28 $2.75
FLAT ROUND WASHERS Brass
Flat Round
59 All prices include GST
WA
SH
ER
S
Cla
ssic Faste
ne
rs Flat Round
SKU Bolt Size O.D. Gauge per 20 per 100 per 200WFZ316716 2BA / 3/16" 7/16" 20G $2.70
3BA .35" 22G $1.956BA .23" 24G $2.55
1/8" 3/8" 20G $2.605/8” 18G $5.15
WFZ316716 3/16" 7/16" 20G $2.70WFZ3161 1” 16G $2.00 $7.35
WFZ1412 1/4" 1/2" 18G $3.60WFZ1434 3/4" 16G $3.70WFZ141 1" 16G $2.00 $6.75WFZ14114 1 1/4” 16G $3.00 $11.00
WFZ51658 5/16" 5/8" 18G $4.50WFZ5161 1” 16G $2.00 $6.75WFZ516114 1 1/4” 16G $3.00 $11.00
WFZ3834 3/8" 3/4" 16G $4.00 $6.00WFZ38114 1 1/4” 16G $3.00 $11.00
WFZ71678 7/16" 7/8" 16G $1.60 $6.40 $9.60
WFZ121 1/2" 1" 16G $6.15WFZ12112 1 1/2” 14G $5.40
WFZM510 M5 10mm 1.0mm $1.35WFZM612 M6 12mm 1.2mm $1.80
FLAT ROUND WASHERS
Steel, Zinc Plated
Zinc
Bolt Size O.D. Gauge(mm) (mm) each per 200
1/4 (M6) 15.88 2.0 $0.11 $11.005/16" (M8) 17.00 2.0 $0.11 $11.003/8" (M10) 20.62 2.0 $0.16 $16.00
HIGH TENSILE
Steel, Zinc PlatedZinc
FLAT ROUND WASHERS
60 All prices include GST
WA
SH
ER
S
Classic F
asteners
Flat Round
Nominal 304O.D. Gauge per 10 per 100 per 200 per 100 per 200
3/16" / 2BA / 7/16" 20G $5.7010 gauge 1/2" 20G $3.40
3/4" 18G $8.251/4" 1/2" 20G $2.60 $2.75
9/16" 18G $3.10 $5.403/4" 18G $4.85
5/16" 5/8" 18G $5.003/4" 18G $4.50 $7.001" 16G $2.20 $10.60
3/8" 3/4" 18G $3.75 $6.201" 16G $2.00 $9.30
7/16" 1 1/8" 16G $3.00 $15.001/2" 1" 16G $2.00 $9.00
M2M3 7mm 0.5mm $4.00M4 9mm 0.8mm $6.85M5 10mm 0.8mm $4.00 $6.00
19mm 1.2mm $1.30 $7.00M6 12.5mm 1.2mm $4.00 $6.00
12.5mm 1.6mm $7.60 18mm 1.6mm $1.80 $9.00
M7 14mm 1.5mm $2.70M8 ? 15mm 1.6mm $2.00 $7.60(5/16") 17mm 1.2mm $7.00
17mm 1.6mm $2.20 $13.85 Common size
25mm 1.6mm $4.00 $24.00 DIN 125A
M10 21mm 1.2mm $4.50 DIN 9021
M12 24mm 2.5mm $3.40 $21.15 ? DIN 433
FLAT ROUND WASHERS Stainless Steel
Stainless
Bolt Size
Stainless316
EXTRA HEAVY DUTY WASHERSZinc platedSKU Size ID OD Gauge each per 100 Per 200WFZM8303 M8 8.5mm 30mm 3mm $0.45 $45.00WFZM10303 M10 11mm 30mm 3mm $0.45 $45.00WFZM12314 M12 13.5mm 31.75mm 4mm $0.65 $32.50
61 All prices include GST
WA
SH
ER
S
Cla
ssic Faste
ne
rs Flat Round
Imperial Gauge mm
10 3.25
12 2.64
14 2.03
16 1.63
18 1.22
20 0.91
22 0.71
24 0.56
26 0.46
Bolt Size OD Gauge ChromeSatin
Chrome2BA 7/16" 20G $0.80
3/16" 7/16" 20G $0.801/4" 9/16" 18G $0.855/16" 5/8" 16G $0.953/8" 3/4" 14G $1.00
7/16" 7/8" 13G $1.20 $1.15
1/2" 1" 13G $1.359/16" 1 1/8" 12G $1.605/8" 1 1/4" 10G $1.703/4" 1 1/2" 10G tba
M6 12mm 1.6mm $0.85M7 14mm 1.7mm $1.00M8 17mm 1.6mm $0.95M10 21mm 1.9mm $1.00
FLAT ROUND WASHERS Steel, Chrome & Satin Chrome
62 All prices include GST
WA
SH
ER
S
Classic F
asteners
Spring
Bolt Size Section Each per 50
5/16” $1.50 $56.253/8” $1.50 $56.251/2” $2.50 $94.00
ZINC
DOUBLE COIL SPRING WASHERS
SPRING WASHERS
Bolt Size Chrome Satin Chrome
Each Each3/16" / 2BA $0.551/4" $0.75 $0.505/16" $0.80 $0.553/8" $0.85 $0.65
7/16" $0.85 $0.751/2" $1.00 $0.859/16" $1.005/8" $1.353/4" $1.75
M6 $0.55M7 $0.95M8 $0.80M10 $0.75
Bolt Size Section per 10 per 100 per 2001/8" sq. section $4.403/16" / 2BA flat section $4.301/4" flat section $5.505/16" flat section $3.65
3/8" flat section $4.607/16" flat section $0.95 $6.751/2" sq. section $1.30 $9.509/16" flat section $1.35 $9.90
M5 flat section $2.30M6 flat section $2.60M8 flat section $3.65
SPRING WASHERS Zinc Plated
ZINC
63 All prices include GST
WA
SH
ER
S
Cla
ssic Faste
ne
rs Spring
Bolt Size each per 100 per 200 per 100 per 2001/8" - 6G - 4BA $3.005/32" - 8G $4.003/16" - 10G - 2BA $6.50
12 Gauge tba1/4" $6.005/16" $8.003/8" $0.16 $8.00 $9.007/16" $0.30 $15.001/2" $0.25 $15.00
DIN 127B
M2M3 $2.00M4 $4.00M5 $6.00 $5.00M6 $4.00M7 $1.00M8 $6.00M10 $6.00 $9.00M12 $0.18 $9.00
SPRING WASHERS - Square SectionStainless Steel 304For use with Socket Head Cap Screws
DIN 7980
Bolt Size per 10 per 100M5 $1.00 $6.00M6 $1.40 $8.00M8 $2.30 $13.00M10 $3.60 $20.00
SPRING WASHERS Stainless Steel
Stainless304
Stainless304
Stainless316
64 All prices include GST
WA
SH
ER
S
Classic F
asteners
Lock
Bolt Size per 10 per 100
1/4” $2.10 $13.005/16” tba3/8” $1.00 $8.00
ZINC
COUNTERSUNK LOCK WASHERS
Bolt Size per 100 per 1000
1/4" $3.00 $16.005/16" $4.00 $20.00
ZINC
EXTERNAL TOOTH LOCK WASHERS
Bolt Size
DIN 6797 Type J per 100 per 1000 each per 100 per 200M4 5/32" 0.06 $6.00M5 3/16" $2.10 $10.50 0.06 $6.00M6 0.12 $12.00 1/4" $3.00 $15.00M8 5/16" $4.00 $22.00 0.10 $10.00M10 3/8" $5.00 $34.00 0.12 $12.00M12 1/2" 0.20 $10.00
INTERNAL TOOTH LOCK WASHERS
STAINLESSZINC
65 All prices include GST
WA
SH
ER
S
Cla
ssic Faste
ne
rs Finishing
FLANGED CUP WASHERS
(Floorboard)
Screw
Sizeeach per 100 per 10 per 100
6 gauge $0.48 $31.00 $5.00 $33.008 gauge $4.00 $26.00
STAINLESS
Nickel Pl.
BRASS
A flanged base keeps these washers from cutting into the surface of your material.
COUNTERSUNK TRIM WASHERS
ScrewSize
per each per 10 per 50 per 100
4 gauge $4.40 $29.00 6 gauge $2.00 $13.00 8 gauge $2.30 $15.0010 gauge $3.00 $20.0012 gauge $1.00 $37.50
BRASSNickel Pl.
These nickel plated brass washers are designed to go under the heads of raised countersunk screws when used to hold down wooden door capping etc.
CUP WASHERS
ScrewSize
each per 100 per 20 per 100 per 20 per 100
4 gauge $0.30 $15.00 $9.75 6 gauge $0.30 $15.00 $7.35 $5.60 $18.00 8 gauge $0.34 $17.00 $10.2010 gauge $11.9012 gauge
ScrewSize
each per 100 each per 100
4 gauge $0.15 $11.25 6 gauge $0.12 $6.00 8 gauge $0.16 $8.00 $0.33 $25.0010 gauge $0.18 $9.00 $0.36 $27.0012 gauge $0.31 $23.0014 gauge (1/4") $0.30 $15.00
STAINLESS
BRASS
Silicon Bronze
Un-plated Nickel Pl.
304
Black zinc
66 All prices include GST
SC
RE
WS
C
lassic Fasten
ers
COUNTERSUNK SELF TAPPING SCREWS
Length is measured from top of head.
Self Tapping Screws
Csk STS
Grade 304
Gauge Length Point
tpi Type each per 100 per 200 each per 100 each per 100 per 2002 Gauge 1/4 24 A
3/8 24 A
1/2 24 A
4 Gauge 3/8" $0.09 $9.001/2" $0.07 $7.00 $0.14 $7.00 $0.10 $10.005/8" $0.08 $8.00 $0.14 $7.00 $0.10 $10.00
6 Gauge 3/8" $0.12 $12.001/2" $0.16 $8.00 $0.12 $12.005/8" $0.16 $8.003/4" $0.16 $8.00 $0.12 $12.001" $0.18 $9.00 $0.14 $14.00
1 1/4" $0.28 $14.00 $0.19 $10.001 1/2" $0.30 $15.00
8 Gauge 1/2" $0.14 $14.005/8" $0.20 $10.003/4" $0.18 $9.00 $0.15 $15.001" $0.22 $11.00 $0.22 $11.00
1 1/4 $0.22 $11.0010 Gauge 3/4" $0.22 $22.00
1" $0.16 $8.00 $0.26 $13.00 $0.34 $17.00
Grade 304
SLOTStainless
PHILLIPSStainless
ANSI B18.6.4
Grade 316
67All prices include GST
SC
RE
WS
C
lassic Fa
sten
ers
Self Tapping Screws
Screw Gauge Number vs Diameter
Use this chart to convert screw shank diameter to screw gauge number.
Screw Gauge Number
Diameter (inches)
Diameter (millimetres)
4 0.112 2.84 5 0.125 3.18 6 0.138 3.51 7 0.151 3.84 8 0.164 4.18
10 0.190 4.83 12 0.216 5.49
2 0.086 2.20
14 0.242 6.15
RAISED COUNTERSUNK
Length is measured from edge of head.
Gauge Length
EachPer 50 Each
Per 100 Each
Per 100 Each
Per 50 Each
Per 100 Each
Per 100 Each
Per 100
4 Gauge 3/8" $0.24 $121/2" $1.10 $38 $0.10 $7 $0.16 $12 $1.10 $38 $0.10 $5 $0.10 $8 $0.155/8" $0.18 $11 $0.13 $10 $0.15 $113/4" $1.10 $38 $0.12 $9 $0.16 $10 $1.10 $38 $0.10 $5 $0.13 $10 $0.25 $161" $1.10 $38 $0.12 $9 $0.16 $12 $0.36 $18
6 Gauge 1/2" $1.10 $42 $0.12 $9 $0.20 $10 $0.13 $105/8" $0.17 $10 $0.16 $12 tba3/4" $1.10 $42 $0.15 $11 $0.23 $17 $1.10 $42 $0.16 $8 $0.16 $121" $1.10 $42 $0.15 $11 $0.27 $20 $1.10 $42 $0.16 $8 $0.30 $15
1 1/4" $1.10 $42 $0.20 $15 $0.30 $15 $0.30 $151 1/2" $0.34 $17
8 Gauge 1/2" $1.10 $42 $0.28 $14 $1.10 $42 $0.10 $7 $0.19 $145/8" $1.10 $42 $0.15 $11 $0.28 $14 $0.16 $123/4" $1.20 $45 $0.18 $12 $0.24 $14 $1.10 $42 $0.15 $12 $0.30 $151" $1.20 $45 $0.20 $15 $0.34 $17 $1.10 $42 $0.15 $12 $0.16 $12
1 1/4" $1.20 $45 $0.25 $19 $0.25 $19 $0.54 $271 1/2" $0.36 $27 $0.40 $20
10 Gauge 5/8" $0.33 $253/4" $0.40 $20 $0.40 $201" $0.36 $22 $0.25 $19
1 1/4" tba $0.64 $321 1/2" $0.38 $29 $0.35 $26
12 Gauge 3/4" $0.44 $26 $0.60 $301" $0.30 $23
1 1/2" $0.35 $26
14 Gauge 1 1/2" $0.50 $38
SLOTBlack Oxide
PHILLIPS / POZIStainlessStainlessZincChrome Chrome Zinc
68 All prices include GST
SC
RE
WS
C
lassic Fasten
ers
PAN HEAD SELF TAPPING SCREWS
Point Type: A & AB Length is measured from under the head
Self Tapping Screws
Screw Gauge Number vs Diameter
Use this chart to convert screw shank diameter to screw gauge number.
Screw Gauge Number
Diameter (inches)
Diameter (millimetres)
0 0.060 1.52 1 0.073 1.78 2 0.086 2.20 3 0.099 2.52 4 0.112 2.84 5 0.125 3.18 6 0.138 3.51 7 0.151 3.84 8 0.164 4.18
9 0.177 4.50 10 0.190 4.83 12 0.216 5.49 14 0.242 6.15
Grade 305
Gauge Length Point
tpi Type each per 100 per 200 each per 100 each per 100 per 200
2 Gauge 1/4" 24 A $0.10 10.00$ 3/8" 24 A $0.12 12.00$
4 Gauge 1/4" $0.08 8.00$ $0.14 $14.003/8" $0.07 8.00$ 0.12$ 6.00$ $0.10 $10.001/2" $0.07 8.00$ $0.10 $10.005/8" $0.08 8.00$ $0.10 $10.003/4" $0.08 8.00$ 0.14$ 7.00$ $0.11 $11.001" $0.08 8.00$ 0.16$ 8.00$
6 Gauge 3/8" $0.08 8.00$ $0.18 $18.001/2" 0.16$ 8.00$ $0.18 $9.005/8" $0.08 8.00$ $0.12 $12.003/4" $0.08 8.00$ $0.12 $12.001" $0.14 $14.00
8 Gauge 3/8" 0.14$ 7.00$ $0.14 $14.001/2" $0.08 8.00$ $0.14 $14.005/8" $0.09 10.00$ $0.15 $15.003/4" 0.20$ 10.00$ $0.15 $15.001" $0.11 11.00$ $0.15 $15.00
1 1/4" $0.13 13.00$ $0.22 $11.00
10 Gauge 1/2" $0.21 $21.005/8"3/4" $0.15 8.00$ $0.20 $20.001" $0.16 8.00$ 0.24$ 12.00$ $0.24 $12.00
12 Gauge 1" $0.35 $18.00
SLOTStainless
Grade 304
PHILLIPSStainless
Grade 316
ANSI B18.6.4
69All prices include GST
SC
RE
WS
C
lassic Fa
sten
ers
Self Tapping Screws
Type AB, Phillips Drive, Black Zinc
TRUSS WASHER HEAD
SEMS HEX HEAD
Single flat washer attached. Available in Black or Yellow zinc plate
Gauge Lengthper per20 100
8 Gauge 1/2" $2.20 $6.005/8" $2.20 $6.003/4" $2.20 $6.00
10 Gauge 3/8" $2.00 $5.001/2" $3.60 $9.003/4" $4.00 $10.00
PHILLIPSBlack
Gauge Lengthper per
each 100 each 100
12 Gauge 3/4" $0.25 $16 $0.24 $14
1/4" 3/4" $0.30 $18 $0.28 $17
HEXBlack
HEXYELLOW
70 All prices include GST
SC
RE
WS
C
lassic Fasten
ers
Wood Screws
COUNTERSUNK - Slotted
SOLID BODY, CUT THREAD
Length is measured from top of head. Brass: highly corrosion resistant, relatively soft Silicon Bronze: Is often preferred over stainless 304/316 in wooden boat construction and re-fastening due to its superior corrosion resistance, and over brass due to its higher strength. Bronze is similar to copper in colour and is sometimes seen in fine woodworking where it is used for its appearance.
Size Length Each per 100 Each per 100 Each per 100
0 gauge 3/8 $0.10 $7.00
1 gauge 1/4 $0.12 $8.503/8 $0.14 $10.00
2 gauge 1/4 $0.12 $8.503/8 $0.13 $9.001/2 $0.15 $11.005/8 $0.17 $12.00
3 gauge 3/8 $0.14 $10.001/2 $0.18 $13.005/8 $0.13 $9.00
4 gauge 3/8 $0.14 $10.001/2 $0.15 $11.00 $0.15 $11.00 $0.15 $11.005/8 $0.20 $21.003/4 $0.20 $14.00 $0.17 $16.00
1 $0.23 $16.00
5 gauge 1/2 $0.15 $10.50
6 gauge 1/2 $0.16 $11.005/8 $0.22 $15.003/4 $0.19 $13.50 $0.24 $17.00 $0.16 $15.00
1 $0.23 $16.00 $0.28 $20.00 $0.21 $20.001 1/4 $0.26 $18.50 $0.35 $33.001 1/2 $0.37 $26.00
8 gauge 3/4 $0.24 $17.00 $0.25 $18.00 $0.25 $24.007/8 $0.24 $17.00
1 $0.33 $23.00 $0.30 $21.00 $0.31 $29.001 1/4 $0.33 $23.00 $0.37 $26.00 $0.37 $36.001 1/2 $0.39 $27.00 $0.40 $28.00 $0.47 $45.001 3/42 $0.47 $33.00 $0.51 $48.002 1/2
Un-plated Nickel platedBRASS SILICON BRONZE
C65100-HO4
71All prices include GST
SC
RE
WS
C
lassic Fa
sten
ers
Wood Screws
COUNTERSUNK - Slotted
SOLID BODY, CUT THREAD
Length is measured from top of head.
Screw Gauge Number vs Diameter
Use this chart to convert screw shank diameter to screw gauge number.
Screw Gauge Number
Diameter (inches)
Diameter (millimetres)
4 0.112 2.84 5 0.125 3.18 6 0.138 3.51 7 0.151 3.84 8 0.164 4.18
10 0.190 4.83 12 0.216 5.49
2 0.086 2.20
14 0.242 6.15
1 0.073 1.78
3 0.099 2.52
9 0.177 4.50
16 0.268 6.81
0 0.060 1.52
Size Length Each per 100 Each per 100 Each per 100
10 gauge 3/4 $0.27 $19.001 $0.33 $23.00 $0.38 $27.00 $0.36 $34.001 1/4 $0.44 $31.00 $0.48 $34.00 $0.53 $48.001 1/2 $0.54 $38.00 $0.55 $39.00 $0.60 $54.001 3/4 $0.53 $37.00 $0.56 $50.002 $0.57 $40.00 $0.61 $58.002 1/2 $0.83 $58.003 $0.93 $65.00
12 gauge 1 $0.42 $29.00 $0.50 $48.001 1/4 $0.52 $36.001 1/2 $0.64 $45.00 $0.86 $81.511 3/4 $0.95 $89.872 $0.84 $59.00 $0.83 $79.002 1/2 $0.90 $63.00 $0.99 $94.003
14 gauge 1 1/4 $0.69 $48.001 1/2 $0.87 $61.002 $0.99 $69.002 1/2 $1.49 $141.08
BRASSUn-plated Nickel plated
SILICON BRONZEC65100-HO4
72 All prices include GST
SC
RE
WS
C
lassic Fasten
ers
Wood Screws
COUNTERSUNK - Square drive
SOLID BODY, CUT THREAD
Length is measured from top of head.
Size Length Each per 25 per 50 per 100
6 gauge 3/41 $0.22 $20.901 1/4
8 gauge 3/4 $0.25 $23.751 $0.36 $34.001 1/4 $0.45 $43.001 1/2 $0.48 $45.602
10 gauge 1 1/4 $0.53 $50.351 1/2 $0.71 $67.451 3/4 $0.82 $77.902 $0.85 $81.002 1/2 $0.97 $92.15
12 gauge 1 1/4 $0.001 1/2 $0.70 $66.502 $0.89 $84.552 1/23 $1.71 $81.23
14 gauge 1 $0.56 $53.201 1/4 $0.66 $62.701 1/2 $0.77 $73.151 3/4 $0.91 $86.452 $1.05 $49.882 1/2 $1.31 $62.233 $2.00 $47.503 1/2 $2.50 $59.384 $2.70 $64.13
16 gauge 3 $2.43 $57.713 1/24 $2.76 $65.55
C65100-HO4SILICON BRONZE
73All prices include GST
SC
RE
WS
C
lassic Fa
sten
ers
Wood Screws
RAISED COUNTERSUNK - Slotted
CUT THREAD
Length is measured from widest part of head. Brass is solid i.e. NOT plated
Screw Gauge Number vs Diameter
Use this chart to convert screw shank diameter to screw gauge number.
Screw Gauge Number
Diameter (inches)
Diameter (millimetres)
4 0.112 2.84 5 0.125 3.18 6 0.138 3.51 7 0.151 3.84 8 0.164 4.18
10 0.190 4.83 12 0.216 5.49
2 0.086 2.20
14 0.242 6.15
1 0.073 1.78
3 0.099 2.52
9 0.177 4.50
16 0.268 6.81
0 0.060 1.52
Size Length Each per 100 Each per 100 Each per 1003 gauge 3/8 $0.11 $8.00
4 gauge 1/2 $0.20 $14.00 $0.17 $12.005/8 $0.15 $11.003/4 $0.25 $18.00 $0.28 $20.007/8 $0.21 $15.00
1 $0.34 $24.00
5 gauge 5/8 $0.25 $18.00
6 gauge 1/2 $0.16 $11.003/4 $0.19 $13.00 $0.23 $16.00
1 $0.24 $17.00 $0.38 $27.001 1/4 $0.34 $24.001 1/2 $0.37 $26.00
7 gauge 3/4 $0.26 $18.50
8 gauge 3/4 $0.20 $14.00 $0.34 $24.001 $0.35 $25.00 $0.49 $34.00 $0.25 $23.751 1/4 $0.52 $36.00 $0.39 $27.00
10 gauge 1 $0.45 $32.001 1/2 $0.60 $42.00 $0.61 $43.00 $0.57 $54.002 $0.70 $49.00
BRASSUn-plated Nickel plated
SILICON BRONZEC65100-HO4
74 All prices include GST
SC
RE
WS
C
lassic Fasten
ers
Wood Screws
ROUND HEAD - Slotted
CUT THREAD
Length is measured from under the head. Brass is solid i.e. NOT plated
Size Length Each per 100 Each per 100 Each per 1001 gauge 3/8 $0.12 $8.00
2 gauge 3/8 $0.13 $9.001/2 $0.14 $10.00
3 gauge 3/8 $0.17 $12.001/2 $0.17 $12.00
4 gauge 3/8 $0.17 $12.001/2 $0.18 $13.003/4 $0.21 $15.00
1 $0.17 $12.00
6 gauge 1/2 $0.24 $17.003/4 $0.25 $18.00 $0.30 $21.00
1 $0.28 $20.00 $0.37 $26.001 1/4 $0.32 $22.001 1/2 $0.38 $27.00
8 gauge 3/4 $0.27 $19.00 $0.21 $20.001 $0.31 $22.00 $0.41 $29.00 $0.26 $20.001 1/4 $0.37 $26.00 $0.31 $29.001 1/2 $0.42 $29.00
10 gauge 3/4 $0.32 $22.001 1/2 $0.56 $39.002 $0.66 $46.00
12 gauge 1 1/2 $0.71 $49.702 $0.90 $63.002 1/2 $1.10 $77.00
14 gauge 2 $1.10 $77.00
BRASS SILICON BRONZEC65100-HO4Nickel platedUn-plated
75All prices include GST
SC
RE
WS
C
lassic Fa
sten
ers
Screw Gauge Number vs Diameter
Use this chart to convert screw shank diameter to screw gauge number.
Screw Gauge Number
Diameter (inches)
Diameter (millimetres)
4 0.112 2.84 5 0.125 3.18 6 0.138 3.51 7 0.151 3.84 8 0.164 4.18
10 0.190 4.83 12 0.216 5.49
2 0.086 2.20
14 0.242 6.15
1 0.073 1.78
3 0.099 2.52
9 0.177 4.50
16 0.268 6.81
0 0.060 1.52
Data
76
NA
ILS
& R
OV
ES
C
lassic Fa
sten
ers
All prices include GST
Brass Nails
ESCUTCHEON PINS
SOLID BRASS
English Standard Wire Gauge (SWG)
Standard Wire Gauge (SWG)
dimensions
SWG inches mm
6 0.192 4.88
7 0.176 4.47
8 0.160 4.06
9 0.144 3.66
10 0.128 3.25
11 0.116 2.95
12 0.104 2.64
13 0.092 2.34
14 0.080 2.03
15 0.072 1.83
16 0.064 1.63
17 0.056 1.42
18 0.048 1.22
19 0.040 1.02
20 0.036 0.91
21 0.032 0.81
22 0.028 0.71
Length Head OD per 100SWG Metric mm
17G 1.5mm 3/8 3.0 3.65$ 1/2 4.40$ 3/4 5.30$
16G 1.6mm 1/2 3.5 4.65$ 3/4 5.40$
1 7.15$ 14G 2.0mm 1/2 4.2 5.95$
3/4 9.80$ 1 12.90$
Gauge
77
NA
ILS
& R
OV
ES
C
lassic Fa
sten
ers
All prices include GST
Copper Nails
COPPER SHEATHING NAILS
SOLID COPPER Clout type nail round plain shank
English Standard Wire Gauge (SWG) Traditionally used to secure copper sheathing (thin copper sheet) onto the hulls of timber boats to reduce marine growth and attack by wood worm.
Gauge Length each per 100
SWG Metric
12G 2.64mm 16mm 0.11$ 7.50$ 105
19mm 0.13$ 9.00$ 87
11G 2.94mm 22mm 0.17$ 12.50$ 65
25mm 0.19$ 13.50$ 58
Approx. Number of
nails per 100g
Copper Square Shank “Boat” Nails
SOLID COPPER FLAT HEAD Square shank copper nails are often used for timber boat manufacture and repair. They can be used by themselves in the standard fashion, clenched or conjunction with a copper roves to create a riveted joint.
Gauge Length each per 100SWG Metric
12G 2.64mm 50mm 0.25$ 17.62$ 65mm 0.44$ 31.05$ 75mm 0.53$ 38.00$
11G 2.94mm 50mm 0.45$ 31.82$
10G 3.25mm 50mm 0.51$ 36.01$
78
NA
ILS
& R
OV
ES
C
lassic Fa
sten
ers
All prices include GST
Copper Roves
Copper Roves are a small dished washer used in conjunction with boat nails to create a riveted joint. The rove should have a hole slightly smaller than the nail being used . It is driven onto the nail, the nail clipped to length and then peened over to create a secure fastening. Looking for a rove setting tool? I suggest that you try a bit of dowel or metal rod, drill a hole in one end to fit the nail and then countersink to create a dish shape.
Size per each per 50 per 100
Outside diameter suits nail size
10mm 14 gauge 0.13$ 9.00$ 140
11mm 12 gauge 0.20$ 14.00$ 94
13mm 10/11 gauge 0.33$ 23.00$ 80
16mm 8 gauge 0.50$ 36.00$ 36
19mm 6 gauge 1.00$ 34.96$ 26
Approx. Number per 100g
79 All prices include GST
TR
IMM
ING
C
lassic Fa
sten
ers
Part No DescriptionPrice Each Per 50
31 Standard Button $4.80 $168.00
302 Button Lock Nut - standard dished type
$0.90 $31.50
33 Button Lock Nut - Flat $0.75 $26.25
33ELButton Lock Nut - for extra thickness material
$1.05 $36.75
18Peg & Nut - standard 3/8" length
$1.20 $42.00
18 - 5/8 Peg & Nut - 5/8" long $1.95 $68.25
11 Wood Screw Peg $1.30 $45.50
76 Self Tapping Peg Stainless Steel
$1.75 $61.50
21 Double Screw Peg Base $1.25 $43.75
10 Locking Collar $0.85 $29.75
1 Canvas Peg $1.45 $50.75
34 Locking Key $0.80
The original “Tenax” fastener, made in England, available in non-rustable nickel plated brass. English made Tenax are NOT interchangeable with the German made variety. How to tell the difference? The upper part (button) on the English version is stamped “made in England”. The peg of the English version is acorn shaped whereas the peg of the German type is spherical.
TENAX - “made in England”
80 All prices include GST
TR
IMM
ING
C
lassic Fasten
ers
LOXX (TENAX) - “made in Germany”
LOXX SMALL HEAD
LOXX Part No Description
Price Each Per 50
Extended lock washer to install LOXX upper and lower parts in material up to 4mm thick.
Nickel plated brass $1.00 $35.00
Antique brass $1.00 $35.00
100% stainless steel $1.00 $35.00
LOXX® is a secure fastening solution that is lockable, easily detachable and prevents accidental opening. It is regarded as particularly child-safe and senior-friendly. Developed more than 80 years ago to fasten soft-tops on convertibles, the LOXX® fastener (the original German fastener) has been used in many fields including the automotive industry, boat accessories, consumer goods, fashion, music and the automation industry. Since 1928, the company Schaeffer, today the Schaeffertec GmbH, is the only German manufacturer of this ingenious fixing system. It is a German product for customers who set value on quality and sustainability - not only for the sake of the environment. There are copies, of course, but the original is and always will be LOXX® - Made in Germany!
LOXX Part No Description
Price Each Per 50
Upper part, Small head.
05134.05000 Brass Nickel plated. $4.10 $102.50
Upper part, Small head.
05180.05000 Brass Nickel plated. $4.10 $102.50
Stamped "DER ORIGINAL KNOPF"
05134.79098Upper part, Small head. Brass Black Chrome plated. Includes lock nut.
$7.15 $178.75
05134.25000Upper part, Small head. Brass with Antique Brass finish. Includes lock nut.
$5.00 $125.00
05134.69000Upper part, Small head. Brass with Antique Copper finish. Includes lock nut.
$5.00 $125.00
81 All prices include GST
TR
IMM
ING
C
lassic Fa
sten
ers
LOXX (TENAX) - “made in Germany”
L
LOXX LARGE HEAD
LOXX Part No Description
Price Each Per 50
Upper part, Big head. Brass Nickel plated. $4.50 $112.50
05140.05000 Includes standard lock nut (3mm)
05141.05000 Includes long lock nut (4mm)
Upper part, Big head.
05182.05000 Brass Nickel plated. $4.50 $112.50
Stamped "DER ORIGINAL KNOPF"
05140.11000Upper part, Big head. Brass Chrome plated. Includes lock nut.
$6.20 $155.00
05140.79098Upper part, Big head. Brass Black Chrome plated. Includes lock nut.
$7.50 $187.50
05140.25000Upper part, Big head. Brass with Antique Brass finish. Includes lock nut.
$5.50 $192.50
05140.69000Upper part, Big head. Brass with Antique Copper finish. Includes lock nut.
$5.50 $192.50
05196.25000Upper part, Big head. "Victoria" with Antique Brass finish. Includes lock nut.
$7.00 $245.00
05196.61000Upper part, Big head. "Mary" with Antique Nickel finish. Includes lock nut.
$7.00 $245.00
Upper part, Big head.08891.02098 Hybrid, Stainless with $5.80 $145.00
Brass nickel plated thread
Includes stainless lock nut.
Upper part, Big head.
08865.02098 100% Stainless $7.55 $188.75
Includes stainless lock nut.
82 All prices include GST
TR
IMM
ING
C
lassic Fasten
ers
LOXX (TENAX) - “made in Germany”
LOXX PEGS
Screw Peg for metal, wood, plastic8 Gauge (4.2mm)Stainless thread
each per 50 each per 50 each per 50 each per 5010mm $2.70 $67.5012mm16mm $2.40 $60.00 $2.75 $68.75 $2.90 $72.50 $4.25 $106.2522mm $2.55 $63.75 $2.85 $71.25
Machine Screw Peg
With stainless nut
Size each per 50 each per 50 each per 50 each per 50M5 x 10mm $2.40 $60.00 $2.70 $67.50 $3.20 $80.00 $3.20 $80.00M5 x 16mm $3.10 $77.50
100% Stainless
Nickel Chrome Black Chrome100% StainlessBrass
Brass topNickel Chrome Black ChromeThread
length
LOXX Part No Description
Price Each Per 50
95121.05000Lower part for fabric. Brass Nickel plated.
$3.00 $75.00
95121.25000Lower part for fabric. Antique Brass finish
$3.50 $122.50
95121.69000Lower part for fabric. Antique Copper finish
$3.50 $122.50
05929.05000Oval plate Standard L=27mm Brass Nickel plated.
$2.15 $53.75
05930.05000Oval plate TBR L=34.2mm Brass Nickel plated.
$2.40 $60.00
Turn Button replacement
83 All prices include GST
TR
IMM
ING
C
lassic Fa
sten
ers
LOXX TOOLS
LOXX (TENAX) - “made in Germany”
LOXX Part No Description
Price Each
04492.50000 Small key $1.00
04495.00000 Big Key $21.65
Small Hole Punch $2.00
84 All prices include GST
SP
EC
IAL
AP
PL
ICA
TIO
N
Classic F
asteners
Special Application Products
RUBBER CABLE TIES
Original Style grey rubber cable ties, as used on British motorcycles. Ideal for holding cables and wiring to frame tubes etc. These ties have a nominal un-stretched length of 112mm. Grey Rubber Cable Tie $1.85
Pack of 10 Rubber Cable Ties $15.80
AMAL CONTROLS MOUNTING SCREWS 1BA FILLISTER HEAD SLOTTED SCREWS These screws have specially turned down heads to suit Amal type throttles and handlebars controls. Size Length Stainless Stainless Polished Natural 1BA 9/16” $2.50 1BA 5/8” $3.70 1BA 3/4” $3.85 1BA 13/16” $3.30 1BA 1” $4.15
85 All prices include GST
SP
EC
IAL
AP
PL
ICA
TIO
N
Cla
ssic Faste
ne
rs Special Application Products
BSA A7/A10 ROCKER COVER NUTS 1/4” BSF sleeve nuts to suit BSA A7/A10’s. Overall length 0.44”/11.2mm Zinc plated steel. Zinc Each Set of 8 $16.00
BSA CARBURETTOR DRIP TRAY
$29 To suit BSA A7/10 Auto Advance models only. Made from stainless steel, laser cut and highly polished. OEM part number 67-0120 The holes are spaced 25mm apart, centre to centre. The two smaller holes are 8.5mm diameter and the larger hole is 30mm diameter.
BSA A7/A10 RGS Rocker Cover Studs (Set of 8) Set of 8 Rocker Cover Studs to suit BSA A7/A10 RGS. 1/4 BSCY 26 tpi thread one end, 1/4 BSW the other. Length = 1" Steel, bright zinc plated. Per Set of 8 $20.00
BSA A7/A10 RGS B31 Sump Plate Studs (Set of 4) Set of 4 Sump Plate Studs to suit BSA A7/A10 RGS, B31, Gold Star 1/4 BSF 26 tpi thread one end, 1/4 BSW the other. Length = 7/8" Steel, bright zinc plated. Per Set of 4 $13.00
87 All prices include GST
HA
RD
WA
RE
& T
OO
LS
C
lassic Fa
sten
ers
Clevis Pins
Mild SteelZinc platedASME B18.8.1
SKU Diameter Length Effective Length Split Pin Price Price
from under the head
from under head to edge of split pin hole
Size each per 25
CPZ1434 1/4 3/4 5/8 1/16 $1.40 $26.25CPZ1478 7/8 3/4 $1.40 $26.25CPZ141 1 7/8 $1.40 $26.25CPZ14114 1 1/4 1 1/8 $1.40 $26.25CPZ14112 1 1/2 1 3/8 $1.40 $26.25
CPZ51634 5/16 3/4 9/16 3/32 $1.65 $31.00CPZ5161 1 13/16 $1.65 $31.00CPZ516114 1 1/4 1 1/16 $1.65 $31.00CPZ516134 1 3/4 1 9/16 $1.65 $31.00
CPZ381 3/8 1 13/16 3/32 $1.75 $32.75CPZ38118 1 1/8 1 $1.75 $32.75CPZ38112 1 1/2 1 5/16 $1.75 $32.75CPZ382 2 1 13/16 $1.75 $32.75
CPZ716112 7/16 1 1/2 1 5/16 3/32 $1.85 $24.75
CPZ12114 1/2 1 1/4 1 1/8 $2.75 $51.50CPZ12112 1 1/2 1 1/4 $2.75 $51.50
Split Pins (Cotter Pins)
Stainless Steel 304/A2Will not rust or corrode when bent or cut.
Lengthmetric imperial
2.5mm 3/32" 25mm $0.1936mm $0.24
3.2mm 1/8" 20mm $0.1845mm $0.38
DiameterPrice each
88 All prices include GST
HA
RD
WA
RE
& T
OO
LS
C
lassic Fa
sten
ers
P Clips - Rubber Lined
Zinc plated and rubber lined to prevent chafing by vibration.
Size Price each6mm $0.8510mm $0.9013mm $1.0016mm $1.1019mm $1.2522mm $1.2525mm $1.30
Zinc plated grease nipples. 1/4” BSF straight 85c
BSF Grease Nipples
89 All prices include GST
HA
RD
WA
RE
& T
OO
LS
C
lassic Fa
sten
ers
Whitworth 55° (Marked in threads per inch)
$14.50
$13.00 Metric 60° (Thread pitch marked in millimetres)
Unified National 60° (Marked in threads per inch)
$16.60
Identify the thread on that mystery bolt. Measure its diameter and then using a thread gauge measure it’s thread pitch. Compare this information to our thread chart to determine what thread your bolt or screw is. Thread chart available upon request and supplied with every thread gauge.
For measuring gauge and length of wood, self tapping, metal thread screws, bolts, wall plugs and drill sizes.
$7.50
Clutch Locking Tools
These tools lock the clutch drum and the centre together for easy tightening or removal of the clutch centre nut. Laser cut. Some minor filing to fit to your clutch basket may be required..
Triumph & BSA 3 & 4 spring clutch locking tool A7/A10 A55/A65 T100 T140 BSA A7, A10 with 4 spring clutches. BSA A50 and A65 with 3 spring clutch. (Please note that this will NOT fit A50 and A65s with 4 spring clutches.) Triumph pre unit twins and unit 650.750. Triumph Bonneville Tiger T100, T120, T140 with 3 or 4 spring clutches. Triumph & BSA part number: 61-3760
$20
BSA 6 spring clutch locking tool A7/A10 B31/B33 Part no. 61-3768
$20
BSA C15, B25, B40, B44, B50 & Triumph TR25W Triumph & BSA part number: 61-3774
$22
Norton Singles and Twins $20
Norton Commando Norton part number: 06-1015
$22
Thread Gauges
EZI Sizer Gauge
90 All prices include GST
HA
RD
WA
RE
& T
OO
LS
C
lassic Fa
sten
ers
C Spanners
Designed for adjusting the suspension on classic and modern motorcycles. Laser cut steel. The C spanners have the following size ends: Small spanner $19 38-45mm 45-52mm
Large spanner $22 69-76mm 89-99mm
Set - Large & Small Spanners $38
C Spanner to suit Norton exhaust pipe nut. $29 Good quality precision laser cut and zinc plated. Norton Part number 06-3968 and 06-3969
BSA fork top nut spanner (Hex = 1 1/2" AF) $16 The C spanner end also fits the engine cush drive nut on the crankshaft. Note: This spanner does not fit the nut on the push rod tube on the singles; the C spanner end only fits the cush drive nut, these are completely two different components. Suits BSA models: Gold Star, Rocket Gold Star (RGS), B31, B33, A7, A10
91 All prices include GST
HA
RD
WA
RE
& T
OO
LS
C
lassic Fa
sten
ers
“Power Coil” thread repair kits are a simple way to repair stripped or damaged threads and are ideal in alloys and other light materials. In most cases the repair is stronger than the original. Many thread types and sizes are available. Listed below are some of the more popular kits. Each kit includes a high speed steel tap, 1.5D long inserts (length equals 1 1/2 times the diameter), insertion tool, tapping drill and instructions. Please contact us for product information and prices of other sizes in the range.
Thread Insert Tools
Extra InsertsPack of 101.5D long
Size Thread Kit Price Price1/4” UNC $69.45 $9.205/16” UNC $76.10 $10.203/8” UNC $89.90 $14.35
M4 0.70mm $74.60 $8.30M5 0.80mm $64.70 $8.30M6 1.00mm $66.30 $9.35M8 1.00mm $89.55 $10.20M8 1.25mm $80.20 $10.20M10 1.25mm $106.10 $14.35M10 1.50mm $101.40 $14.35
Extra InsertsPack of 101.5D long
Size Thread Kit Price Price1/4” BSF $101.50 $9.255/16” BSF $108.40 $10.353/8” BSF $115.30 $14.35
1/4” BSCY $77.10 $12.205/16” BSCY tba $15.953/8” BSCY $96.50 $18.50
1/4” BSW $72.70 $9.205/16” BSW $78.90 $10.353/8” BSW $92.50 $14.35
2BA $113.80
10-32 UNF $73.75 $8.201/4” UNF $69.45 $9.205/16” UNF $76.10 $10.203/8” UNF $89.90 $14.35
92 All prices include GST
TAP
S &
DIE
S
Classic F
asteners
We source a wide variety of taps, dies and die nuts, from the most common to the most unusual. Listed below are some of the more popular sizes. A variety of tap and die sets are also available. Prices on request.
All the Taps and Dies that we supply are of the finest quality.
All taps listed are available in 3 forms Taper Gradual taper used for starting new threads. Intermediate Less tapered, used to follow a Taper tap or for restoring threads. Bottoming Very little taper, so will cut thread to the bottom of a blind hole, but
the lack of taper makes starting a new thread more difficult. For general workshop use we would recommend the use of an Intermediate tap, and unless otherwise specified, this is what we will supply.
Taps, Dies & Drills
SIZE tpi TAPS DIE NUT TAPPINGCarbon High Speed Carbon High Speed Carbon DRILLSteel Steel Steel Steel OD Steel Size (mm)
M3 1"M4 0.70 $12.25 $15.65 $24.80 1" $32.30 3.30M5 0.80 $8.40 $17.45 $24.80 1" $32.30 4.20M6 1.00 $8.40 $18.85 $24.80 1" $32.30 5.00M7 1.00 $8.65 $21.65 $24.80 1" $32.95 6.00M8 1.00 $8.65 $35.00 $24.80 1" $32.30 7.00M8 1.25 $8.70 $18.90 $24.80 1" $32.30 6.80M10 1.25 $11.50 $48.05 $24.80 1" $47.10 8.80M10 1.50 $11.50 $25.70 $24.80 1" $47.10 8.50M12 1.25 $23.55 $55.25 $27.90 1" $47.10 10.80M12 1.50 $14.40 $55.25 $27.90 1" $47.10 10.50M14 1.50 $60.60
BUTTON DIES
Unified National Fine (UNF) - 60° Thread AngleSIZE tpi TAPS DIE NUT TAPPING
Carbon High Speed Carbon High Speed Carbon DRILLSteel Steel Steel Steel OD Steel Size (mm)
10-32 32 $9.30 $19.15 $31.50 1" $36.30 4.101/4" 28 $9.30 $18.80 $24.80 1" $25.20 5.505/16" 24 $11.55 $19.25 $24.80 1" $27.60 6.903/8" 24 $11.55 $24.30 $24.80 1" $27.60 8.507/16" 20 $12.75 $32.80 $28.00 1" $30.35 9.901/2" 20 $13.95 $37.00 $29.70 1" $31.30 11.50
BUTTON DIES
Unified National Coarse (UNC) - 60° Thread AngleSIZE tpi TAPS DIE NUT TAPPING
Carbon High Speed Carbon High Speed Carbon DRILLSteel Steel Steel Steel OD Steel Size (mm)
6-32 32 $12.95 $20.90 $31.50 1" - 2.858-32 32 $11.50 $19.60 $31.50 1" - 3.5010-24 24 $9.30 $17.95 $31.50 1" - 3.9012-24 24 $9.30 $21.60 $31.50 1" - 4.501/4" 20 $9.30 $17.15 $25.20 1" $27.60 5.105/16" 18 $9.30 $17.95 $25.20 1" $27.60 6.603/8" 16 $10.05 $24.75 $25.20 1" $27.60 8.00
BUTTON DIES
93 All prices include GST
TAP
S &
DIE
S
Cla
ssic Faste
ne
rs Taps, Dies & Drills
British Association (BA) - 47.5° Thread AngleSIZE tpi TAPPING
DRILL
Carbon High Speed Size (mm)0 25.4 $10.70 $21.20 $32.85 5.101 28.2 $10.70 $24.85 $32.85 4.502 31.4 $10.70 $20.45 $32.15 4.003 34.8 $11.35 $22.80 $36.95 3.404 38.5 $11.35 $22.75 $36.30 3.005 43.0 $11.35 $22.25 $36.95 2.656 47.9 $11.65 $22.20 $39.90 2.307 52.9 $15.70 $33.80 $50.95 2.058 59.1 $15.25 $35.25 $50.95 1.809 65.1 $15.70 $59.40 $51.40 1.5510 72.6 $16.40 $61.40 $51.70 1.40
Carbon Steel
TAPS
High Speed Steel
BUTTON DIESAll 1" OD
British Standard Whitworth (BSW) - 55° Thread AngleSIZE tpi TAPS DIE NUT TAPPING
Carbon High Speed Carbon High Speed Carbon DRILLSteel Steel Steel Steel OD Steel Size (mm)
1/8" 40 $10.35 $29.50 $25.90 1" $20.10 2.553/16" 24 $7.10 $18.45 $23.30 1" $20.10 3.701/4" 20 $7.85 $17.95 $23.30 1" $23.00 5.105/16" 18 $8.65 $18.85 $23.30 1" $25.62 6.503/8" 16 $10.05 $25.75 $23.30 1" $25.65 7.907/16" 14 $12.45 $34.25 $26.26 1" $27.60 9.301/2" 12 $14.55 $38.35 $28.25 1" $28.70 10.50
BUTTON DIES
British Standard Fine (BSF) - 55° Thread AngleSIZE tpi TAPS DIE NUT TAPPING
Carbon High Speed Carbon High Speed Carbon DRILLSteel Steel Steel Steel OD Steel Size (mm)
3/16" 32 $8.15 $23.10 $32.95 1" $28.70 4.001/4" 26 $9.30 $27.00 $32.30 1" $28.70 5.405/16" 22 $10.75 $27.00 $32.95 1" $28.70 6.803/8" 20 $12.65 $36.70 $32.95 1" $28.70 8.307/16" 18 $15.55 $43.85 $37.00 1" $39.50 9.701/2" 16 $18.90 $49.85 $61.00 1 1/2" $31.30 11.109/16" 16 $28.40 $66.00 $93.60 2" $48.00 12.705/8" 14 $37.70 $64.45 $93.60 2" $51.50 14.003/4" 12 $44.55 $99.54 $99.00 2" $63.50 16.75
BUTTON DIES
94 All prices include GST
TAP
S &
DIE
S
Classic F
asteners
GOLIATH PREMIUM QUALITY DIE STOCK
For 1” diameter dies $32.00
TAP WRENCHES These are of high quality, normally Sutton brand. “T” Type Tap Wrenches
No. Size range Price 1/4 “T” Type 1/8” to 1/4” $31.00 1/2 “T” Type 1/4” to 1/2” $50.00
Bar Type Tap Wrenches No. Tap Size range Price 00 1/16” to 1/4” $67.00 0 1/8” to 1/2” $71.00 5 3/16” to 5/8” $86.00 6 1/4” to 3/4” $109.00
Dependent upon availability BSCY High Speed Steel taps & dies are sometimes substituted with UNS, also a 60 degree thread form.
DIE STOCKS These are of high quality, normally Sutton, Bordo or Goliath brands.
For 1” diameter dies $30.00 For 1 1/2” diameter dies $66.00 For 2” diameter dies $90.00
Taps, Dies & Drills
British Standard Cycle (BSCY) - 60° Thread Angle
SIZE tpi TAPS TAPPINGCarbon High Speed Carbon High Speed DRILLSteel Steel Steel Steel OD Size (mm)
1/4” 26 $22.75 $45.65 $44.75 $67.75 1" 5.605/16” 26 $26.75 $51.45 $46.35 $67.75 1" 7.003/8” 26 $33.85 $51.45 $46.35 $75.25 1" 8.707/16" 20 Use 7/16 UNF Use 7/16 UNF7/16” 26 $39.70 $58.80 $53.55 $89.55 1" 10.301/2” 20 Use 1/2 UNF Use 1/2 UNF1/2” 26 $39.70 $58.80 $53.55 $90.00 1" 15/32"9/16” 20 - - 1 1/2" 13.109/16” 26 - - 1 1/2" 13.505/8” 20 - - 1 1/2" 14.75
BUTTON DIES
95 Supplied by Classic Fasteners - www.classicfasteners.com.au
DA
TA
Cla
ssic Faste
ne
rs
Identifying the thread of a bolt or screw is quite easy.
To identify a bolt or screw you need to know 1. the diameter of the bolt 2. the number of threads per inch (or pitch) on the
bolt These results are compared to information on a thread chart to identify the thread type (available from our web site).
Measuring the diameter of a bolt or screw. This is best done with a micrometer or vernier. If you do not have access to this equipment careful measurement using a steel rule will be fine for sizes 1/4” and up.
Measuring the threads per inch (or pitch) Metric threads are measured by their pitch. That is the distance from the crest of one thread to the crest of the next, measured in millimetres. The pitch of a metric thread can be checked by direct measurement with a metric rule.
Imperial threads have their pitch measured indirectly as a given number of teeth per inch.
Use a steel rule to find the pitch or teeth per inch of a thread
Place a rule along the thread, parallel to its axis. Line up the crest of one tooth with a major
division Count the number of teeth to match a whole
number of divisions Calculate the number of threads per inch
A much easier and more accurate way to identify the pitch of a bolt is to use a thread gauge (also known as a screw pitch gauge). These gauges consist of a steel case with a number of folding leaves at each end. Each leaf has teeth of a particular pitch, and is marked for reference.
Using the bolt pitch and diameter, compare this to the information on thread charts to identify the thread type. Thread charts available from our web site.
How To Identify Thread Types
96 Supplied by Classic Fasteners - www.classicfasteners.com.au
DA
TA
Cla
ssic Faste
ne
rs
Imperial Thread Chart (Threads per inch) Major Major BSF BSCY Brass BSW UNC UNF BA
Size Dia " Dia mm 55° 60° 55° 55° 60° 60° 47.5° 0G 0.0600 1.524 80
1/16 0.0625 1.588 60 10BA 0.0669 1.699 72.6
1G 0.0730 1.854 64 72 9BA 0.0748 1.900 65.1
5/64 0.0781 1.984 56 2G 0.0860 2.184 56 64
8BA 0.0866 2.200 59.1 3/32 0.0938 2.381 48 7BA 0.0984 2.499 52.9 3G 0.0990 2.515 48 56
7/64 0.1094 2.778 48 6BA 0.1102 2.799 47.9 4G 0.1120 2.845 40 48
1/8 0.1250 3.175 40 26 40 5G 0.1250 3.175 40 44
5BA 0.1260 3.200 43 6G 0.1380 3.505 32 40
9/64 0.1406 3.572 4BA 0.1417 3.599 38.5
5/32 0.1563 3.969 32 26 32 3BA 0.1614 4.100 34.8 8G 0.1640 4.166 32 36
11/64 0.1719 4.366 2BA 0.1850 4.699 31.4
3/16 0.1875 4.763 32 32 26 24 10G 0.1900 4.826 24 32
13/64 0.2031 5.159 1BA 0.2087 5.301 28.2 12G 0.2160 5.486 24 28
7/32 0.2188 5.556 28 26 24 15/64 0.2344 5.953 0BA 0.2362 5.999 25.4 1/4 0.2500 6.350 26 26 26 20 20 28
17/64 0.2656 6.747 9/32 0.2813 7.144 26 26 26 20 5/16 0.3125 7.938 22 26 26 18 18 24 11/32 0.3438 8.731 3/8 0.3750 9.525 20 26 26 16 16 24
13/32 0.4063 10.319 7/16 0.4375 11.113 18 20/26 26 14 14 20 15/32 0.4688 11.906 1/2 0.5000 12.700 16 20/26 26 12 13 20
9/16 0.5625 14.288 16 20/26 26 12 12 18 5/8 0.6250 15.875 14 20/26 26 11 11 18
11/16 0.6875 17.463 14 26 11 3/4 0.7500 19.050 12 20/26 26 10 10 16
13/16 0.8125 20.638 7/8 0.8750 22.225 11 20/24 26 9 9 14
15/16 0.9375 23.813 1 1.0000 25.400 10 24 26 8 8 12*
* Note: UNF is the same as ANF and SAE except at 1" dia where ANF and SAE are 14 tpi.
Imperial Thread Chart (Threads per inch)
97 Supplied by Classic Fasteners - www.classicfasteners.com.au
DA
TA
Cla
ssic Faste
ne
rs
SEE OUR WEB SITE !
WWW.CLASSICFASTENERS.COM.AU
WHAT YOU WILL FIND
Latest catalogue to download Technical information
Online store
Metric Thread Chart Dia mm
Dia inches
ISO Coarse
ISO Fine
SI French
A'mobileFine,
French
SI (DIN) German
Lowenherz
Swiss "A"
Swiss "B"
1 0.0394 0.25 0.25 0.25 0.25 0.2 1.1 0.0433 0.25 1.2 0.0472 0.25 0.25 0.25 0.25 0.2 1.4 0.0551 0.3 0.3 0.3 0.3 0.2 1.6 0.0630 0.35 1.7 0.0669 0.35 0.35 0.35 0.2 1.8 0.0709 0.35 2 0.0787 0.4 0.4 0.4 0.4 0.25
2.2 0.0866 0.45 2.3 0.0906 0.4 0.4 0.4 0.25 2.5 0.0984 0.45 2.6 0.1024 0.45 0.45 0.45 0.35 3 0.1181 0.5 0.6 0.5 0.5 0.5 0.35
3.5 0.1378 0.6 0.6 0.6 0.6 0.6 0.35 4 0.1575 0.7 0.75 0.7 0.7 0.7 0.5
4.5 0.1772 0.75 0.75 0.75 0.75 0.5 5 0.1969 0.8 0.9 0.75 0.8 0.8 0.8 0.5
5.5 0.2165 0.9 0.9 0.9 0.5 6 0.2362 1 1 0.75 1 1 1 0.75 7 0.2756 1 1 0.75 1 1.1 1 0.75 8 0.3150 1.25 1 1.25 1 1.25 1.2 1.25 1 9 0.3543 1.25 1 1.25 1.3 1.25 1 10 0.3937 1.5 1.25 1.5 1/1.25 1.5 1.4 1.5 1 11 0.4331 1.5 1/1.25 1.5 1.5 1 12 0.4724 1.75 1.25 1.75 1.25/1.5 1.75 1.75 1.5 14 0.5512 2 1.5 2 1.5 2 2 1.5 15 0.5906 1.5 16 0.6299 2 1.5 2 1.5 2 2 1.5 17 0.6693 1.5 1.5
18 0.7087 2.5 1.5 2.5 1.5 2.5 2.5 1.5 20 0.7874 2.5 1.5 2.5 1.5 2.5 2.5 1.5 22 0.8661 2.5 1.5 2.5 1.5 2.5 2.5 1.5 24 0.9449 3 2 3 1.5 3 3 2 25 0.9843 1.5 2 26 1.0236 2 27 1.0630 3 2 3 1.5 3 3 2 28 1.1024 1.5 2 30 1.1811 3.5 2 3.5 1.5 3.5 3.5 2
Metric Thread Chart
PLEASE SUPPLY TO: (Block Capitals please)
M
Address
Post Code E-mail
Phone No ( )
Fax No ( )
Please debit my Visa MasterCard Card No ________ ________ ________ ________ Card Expiry date ___________________________ Signature _________________________________ Name on Card _________________________________________ (Block Letters)
METHOD OF PAYMENT Cheque Money Order Credit Card Note: Make cheques and Money Orders payable to “Classic Fasteners”
ORDER FORM
PO BOX 187 WELLAND SA 5007
Ph (08) 7127 0582 [email protected] www.classicfasteners.com.au ABN 68 056 601 532
18-May-18
Quantity Description Price Each
$ c
Merchandise Total
Post & Packing
Total