o.d. - welcome to e.h. wachs€¦ · parting tool slide used for parting (cutting) ... this machine...

2 | 600 KNIGHTSBRIDGE PARKWAY | LINCOLNSHIRE, ILLINOIS 60069 | T:+1.847.537.8800 | F:+1.847.520.1147 | [email protected] | ehwachs.com

½in13mm

12in305mm

24in610mm

36in914mm

48in1219mm

60in1524mm

72in1829mm

90in2286mm

120in3048mm

SD

SF

SDSF 1.0

SDSF 2.0

SDSF 3.0

SDSF 4.0

SDSF 5.0

SDSF 6.0

LC

SF

LCSF 206

LCSF 408

LCSF 610

LCSF 612

LCSF 814

LCSF 1016

LCSF 1420

LCSF 1824

LCSF 2228

LCSF 2632

LCSF 3036

LCSF 3642

LCSF 4248

DY

NA

PR

EP

MDSF 612

MDSF 814

MDSF 1016

MDSF 1218

MDSF 1420

MDSF 1824

HD

SF

HDSF 1224

HDSF 2436

HDSF 3648

HDSF 4860

HDSF 6072

HDSF 7284

LD

SF

LDSF 75

LDSF 90

LDSF 105

LDSF 120

TR

AV

-L-

CU

TTE

R MODEL E (PNEUMATIC)

MODEL HE (HYDRAULIC)

GU

ILLO

TIN

E SUPER C

MODEL D

SUPER D

GOLIATH

O.D. Mounted Machine Tools - Pipe Ranges


SDSF Small Diameter Split Frame

The Small Diameter Split Frame (SDSF) is an externally mounted machine tool for cutting, beveling, and counterboring pipe from 0.5in to 6in (ND15-150) diameter. The SDSF is also capable of performing socket weld removal and chipless wheel cutting. Lightweight and flexible, the SDSF is optimized for low clearance environments. It offers simple setup and operation, featuring a self-squaring clamping system for precise cutting results typically available only with fixed machine tools.

The SDSF operates on air or electric power using standard Wachs motors and adapters. A variety of tool slides and other accessories are interchangeable between many SDSF models. Best of all, the SDSF features E.H. Wachs legendary durability and is designed and built for years of reliable service.

SDSF MODELSMODEL PIPE SIZE (in) PIPE SIZE (DN)

SDSF 1.0 1/2 - 1in DN15-25

SDSF 2.0 1-1/4 - 2in DN32-50

SDSF 3.0 2 - 3in DN50-80

SDSF 4.0 3 - 4in DN80-100

SDSF TOOLING

SEVERING High Speed Steel

.125in (3.2mm) width low clearance tool.125in (3.2mm) width standard tool.125in (3.2mm) width extended-reach tool

BEVEL High Speed Steel

37.5° low clearance tool 37.5° standard tool 37.5° extended-reach tool 30° & 45° extended-reach tools

COUNTERBORE High Speed Steel 4:1 taper (15°) counterbore tool

RADIAL SOCKET WELD

REMOVALHigh Speed Steel

.375in (9.5mm) width low clearance tool.375in (9.5mm) width standard tool.375in (9.5mm) width extended reach tool

AXIAL SOCKET WELD

REMOVALHigh Speed Steel

.375in (9.5mm) width low clearance tool.375in (9.5mm) width standard tool.375in (9.5mm) width extended reach tool

PARTING TOOL SLIDEUsed for parting (cutting) of pipe and tube.

BEVELING TOOL SLIDEUsed in conjunction with parting slide to cut and bevel simultaneously

RADIAL SOCKET WELD SLIDEUsed for radial removal of socket welds, requires less axial clearance

AXIAL SOCKET WELD SLIDE

Used for axial removal of socket welds

UNIVERSAL COUNTERBORE TOOL SLIDEUse for counterboring of pipe I.D.

FME TOOL SLIDEForeign Material Exclusion, to prevent introduction of chip debris


LCSF Low Clearance Split Frame

The Low Clearance Split Frame (LCSF) is ideal for all types of pipe cutting and end-prepping. The split frame machines can be split in half or ‘broken open, then bolted back together. This allows them to open and mount around the O.D. of in-line piping, or slipped over open-ended pipe. The LCSF has been engineered to apply precise, consistent square cuts and bevels on pipe, tube and casing the first time, every time. Using a split frame is a safe, clean operation that neither affects the metallurgical qualities of the pipe nor places airborne contaminants into the environment. 14 models are available to cut, bevel and counterbore pipe from 2in through 48in (ND50– 1200)* on most wall thicknesses and alloys.

LCSF MODELSMODEL PIPE SIZE (in) PIPE SIZE (DN)

LCSF 204/3 2 - 4in DN50-100

LCSF 206/3 2 - 6in DN50-150

LCSF 408/3 4 - 8in DN100-200

LCSF 610/3 6 - 10in DN150-250

LCSF 612/3 6 - 12in DN150-300

LCSF 814/3 8 - 14in DN200-350

LCSF 1016/3 10 - 16in DN250-400

LCSF 1420/3 14 - 20in DN350-500

LCSF 1824/3 18 - 24in DN450-600

LCSF 2228/3 22 - 28in DN550-700

LCSF 2632/3 26 - 32in DN650-800

LCSF3036/3 30 - 36in DN750-900

LCSF 3642/3 36 - 42in DN900-1050

LCSF 4248/3 42 - 48in DN1050-1200

OUT-OF-ROUND SLIDESSpring-loaded slides that track the surface of out-of-round pipe. Also applicable where centering the LCSF is difficult because of limited clearance.

WORM SLIDESHeavy duty feed mechanisms for durability when cutting heavy wall pipe.

BRIDGE SLIDEEnd prep accessory for beveling, compound beveling, J preps, and counterboring, available for 12in – 48in LCSFs.

UNIVERSAL COUNTERBORE TOOL SLIDESlide with a form tool attachment for counterboring with any size LCSF. Slide mounts to bevel tool slide and is used to counterbore pipe.

I.D./O.D. MODULEMounts to bevel tool slide, for turning the outside and inside diameter of pipe. May also be used for O.D. tapering with manual axial feed.

STANDARD TOOL SLIDESLow Profile Slides, Extended Slides, and Super Extended Slides, are available

LCSF SPLIT FRAME Bolted together, ready for cutting

LCSF SPLIT APART Ready for mounting around pipe


HDSF Heavy Duty Split Frame clamshell style machines are the largest and most rugged in the Wachs split frame family, and are designed to cut, bevel, single point, counterbore and face flanges on large diameter pipes from 12in to 84in O.D. (DN300-2100). Designed for parting and beveling of larger diameter pipelines in the field, the HDSF series is constructed with a bigger cross section, larger gear sets and massive hardened steel components.

HDSF MODELSMODEL PIPE SIZE (in) PIPE SIZE (DN)

HDSF 1224 12.75 - 24in DN300 - 600

HDSF 2436 24 - 36in DN600 - 900

HDSF 3648 36 - 48in DN900 - 1200

HDSF 4860 48 - 60in DN1200 - 1500

HDSF 6072 60 - 72in DN1500 - 1800

HDSF TOOLING

SEVERING High Speed Steel .25in width (6.35mm)

BEVEL High Speed Steel 37.5° bevel angle

SINGLE POINT High Speed Steel

For use with Single Point slide, compound bevel or J-prep bevel

templates

HDSF IN SHIPPING CRATE Loaded with accessories, this machine is ready for cutting on arrival.

OUT-OF-ROUND SLIDESSpring-loaded slides that track the surface of out-of-round pipe.

CANTILEVER SLIDECan be configured to counterbore, bevel heavy wall and face large diameter flanges

DUAL DRIVE MOTORincludes two pinion drives

and two drive motors

HDSF Split Frame ratcheted open for mounting

HDSF HEAVY DUTY SPLIT FRAME

HDSF Heavy Duty Split Frame


LDSF Large Diameter Split Frame

E.H. Wachs LDSF Large Diameter Split Frame is designed for cold cutting, beveling, facing and counterboring on large diameter pipes, vessels and flanges. It’s been engineered to incorporate multiple advancements designed to make it stronger, faster to set up, faster to operate and even more versatile than our class leading HDSF models. Picking up where our midsize split frames leave off, four standard LDSF sizes will cover a range from 60in to 120in OD (DN1500-DN3000).

LDSF MODELSMODEL PIPE SIZE (in) PIPE SIZE (DN)

LDSF 75 60-75in DN 1500 - 1875

LDSF 90 75-90in DN 1875 - 2250

LDSF 105 90-105in DN 2250 - 2625

LDSF 120 105-120in DN 2625 - 3000

LDSF TOOLING

SEVERING High Speed Steel .25in width (6.35mm)

BEVEL High Speed Steel 37.5° bevel angle

SINGLE POINT High Speed Steel

For use with Single Point slide, compound bevel or J-prep bevel

templates

LDSF IN SHIPPING CRATE Loaded with accessories, this machine is design for quick, easy assembly.

OUT-OF-ROUND SLIDESSpring-loaded slides that track the surface

of out-of-round pipe.

COUNTERBORE AND REVERSE BEVELING MODULESingle Pointing Tool Slide performs

perpendicular and angled counterbore.

CANTILEVER SLIDESingle Pointing Tool slide can be

configured to counterbore, bevel heavy wall and

face large diameter flanges

LDSF LARGE DIAMETER SPLIT FRAME

PIVOTING AUTOFEED SLIDE Single Pointing at plus or minus 20°

PARTING SLIDE WITH MICROMETER Provides precise parting and beveling


TRAV-L-CUTTER Pipe Saw

The Wachs Trav-L-Cutter is a portable milling machine capable of cold cutting and beveling simultaneously on all machinable pipe materials, pipe schedules and pipe sizes from OD 6in - 72in (152.4 - 1829 mm). Mounted by its own tensioning chain, the Trav-L-Cutter drives itself around the pipe as it machines. For larger diameter pipe or vessels, simply add more drive chain sections. For greater accuracy specify the Trav-L-Cutter Guide Track. Available in pneumatic and hydraulic drive options.

TRAV-L-CUTTER MODELSMODEL PIPE SIZE (in) PIPE SIZE (DN)

Model E (Pneumatic) 6-72in DN 150-1800

Model HE(Hydraulic) 6-72in DN 150-1800

AVAILABLE BLADE TYPES

SLITTING BLADE BEVEL CUTTERBEVEL CUTTER & SLITTING SAW COMBINATION

CHAIN ASSEMBLY & PINS

GUIDE TRACK

MODEL E (PNEUMATIC)

MODEL HE (HYDRAULIC)

CHAIN ASSEMBLY & PINSAdd more drive chain to the Trav-L-Cutter, increasing the effective operating diameter. Available in lengths ranging from 6-72in (DN150-1800).

GUIDE TRACKInstall around the pipe circumference for precise, square cutting on vertical and / or large diameter pipes. Includes Trav-L-Cutter guide wheels for tracking. Available for 6in- 60in O.D. (ND150-1500) pipe sizes.


GUILLOTINE Pipe Saw

E.H. Wachs family of portable Guillotine® pipe saws are designed to cold cut 2in - 32in (DN 50 - 800) pipe, as well as solids such as bar stock, rails and beams. Their compact design and easy setup make it the ideal saw for contractors, pipeline operations, refineries, petrochemical and processing plants and anywhere a fast, safe cut is needed. In use virtually everywhere, they’re strong yet light, simple to mount, simple to operate and simply bulletproof. It’s no wonder that when pipe saws are first mentioned, the “Wachs Saw” is mentioned first.

GUILLOTINE MODELSMODEL PIPE SIZE (in) PIPE SIZE (DN) POWER OPTIONS

Super C 2-12in DN 50 - 300 Electric, Air, Hydraulic

Model D 6-18in DN 150 - 450 Air, Hydraulic

Super D 10-24in DN 250 - 600 Air, Hydraulic

Goliath 16-32in DN 400 - 800 Hydraulic

AVAILABLE BLADE TYPES

MODEL GENERAL USE

THIN WALL (3/16in MAX)

HEAVY DUTY WALL

CARBIDE TIPPED

Super C 4 4

Model D 4 4 4 4

Super D 4

Goliath 4 4

SAW BLADESMODEL C HSS STANDARD BLADE

For General Use

MODEL SUPER C STANDARD BLADE For General Use

Carbon steel pipe, stainless steel and other high alloy materials

MODEL SUPER C CARBIDE BLADECast, ductile and concreted-

lined pipe

MODEL D HSS STANDARD BLADECarbon steel pipe, stainless steel

and other high alloy materials

MODEL D CARBIDE BLADECast, ductile & concreted-

lined pipe

MODEL SUPER D HEAVY DUTY BLADE Carbon steel pipe, stainless steel &

other high alloy materials

GOLIATH HEAVY DUTY BLADEFor general use

GUILLOTINE SUPER C

GUILLOTINE MODEL D

GUILLOTINE SUPER D

GOLIATH GUILLOTINE


½in13mm

4in102mm

8in203mm

12in305mm

16in406mm

24in610mm

EP

42

4 E

ND

PR

EP

EP 424 FORM TOOLING

EP 424 SINGLE POINTING

SD

B S

MA

LL

DIA

ME

TE

R B

EV

EL

ER

SDB 103

SDB 206

SDB 412

FF

FL

AN

GE

FA

CE

R

FF 206

FF 313

FF 424

I.D. Mounted Machine Tools


EP 424 Pipe End Prep

The Wachs EP 424 with the patented new SpeedPrep feed system is a precision ID mount end prep machine tool designed to bevel, compound bevel, J prep, face and counterbore pipe, fittings and valves. Able to machine any bevel or compound bevel without templates, incline tool slides or work stoppage. The EP 424 is powerful enough to form tool from 4in - 14in (DN 100 - 350) and single point from 8in - 24in (DN 200 - 600) up to a 6.5in (165 mm) wall thickness.

EP 424 MODELSMODEL PIPE SIZE (in) PIPE SIZE (DN)

Form Tool 4-16in DN 100-400

Single Point 8-24in DN 200-600

EP 424 TOOLING

Cross section of EP 424 mounted for single pointing

EP 424 SINGLE POINT MODEL

EP 424 FORM TOOL MODEL

Faces flanges up to 24in (609.6mm)

PREMIUM GRADE HSS INSERT (2 SIDED)

COUNTERBORE TOOL TAPER 4:1

HOLDER KIT COUNTERBORE

COUNTERBORE TOOL TAPER 4:1

FORM TOOL INSERT HOLDER

FACING TOOL INSERT HOLDER (HIGH RANGE)

30º BEVEL TOOL INSERT HOLDER KIT


SDB Small Diameter Beveler

E.H. Wachs® SDB line of small diameter bevelers have been engineered for fast, precise onsite facing, beveling, compound beveling and counterboring of light and heavy wall pipe, tube or casing. Proven workhorses, they set up quickly with a self centering mandrel and chuck assembly mounting to the pipe I.D. Their highly productive design means one person can setup, operate and create a perfect weld prep in minutes.

SDB BEVELER MODELSMODEL PIPE RANGE (in) PIPE RANGE (mm)

103/3 ID .875-4.5in OD ID 22.2-114 mm OD

206/2 ID 1.91-6.625in OD ID 48.5-168mm OD

412/2 ID 3.80-12.02in OD ID 96.5 - 305.3mm OD

SDB 103/3 PIPE END PREP BEVELERFace, bevel and counterbore simultaneously on carbon, stainless and high alloy steels. Machine boiler tubes, heavy wall pipe and thick wall tubing. Prep elbows and face flanges* using only one machine. Fast, accurate weld preps on pipe and tube from 0.875in I.D. through 4.5in O.D. (22.2 mm – 114 mm) and flanges 2in I.D. (50.8 mm) through 6in O.D. (152.4 mm). Available in air or electric.

SDB 206/2 PIPE END PREP BEVELERBevel, counterbore, face and compound bevel pipe and tube from 1.91in I.D. through 6.625in O.D. (48.5 mm – 168 mm) and face flanges* from 3in I.D. through 13in O.D. (76.2 mm – 330.2 mm), regardless of material wall thickness. Only a 2.25in (57 mm) radial clearance is required. Available in air, electric or hydraulic.

SDB 412/2 PIPE END PREP BEVELERHeavy-duty and compact. Designed to face, bevel, compound bevel and counter bore 3.80in I.D. through 12.02in O.D. (96.5 mm – 305.3 mm) pipe or tube, up to 1.125in (29 mm) wall thickness and face flanges* 4in I.D. through 24in O.D (101.6 mm through 609.6 mm). Available in air, electric or hydraulic.

SDB 412

SDB 103

SDB 206

SDB TO FF CONVERSION KIT: HEAD, MANDREL, LEGS, & FASTENERS

FORM TOOL TO SINGLE POINT FF CONVERSION KIT


FF Flange Facer

Now anyone can produce a lathe quality surface finish on flat, raised or recessed face flanges in minutes. Based on the powerful Wachs SDB series ID mount end prep machines, the Wachs FF series flange facers offer a rugged yet lightweight and compact design that allows them to fit into tight quarters. With the addition of the SDB conversion kit, the FF models can be converted into SDB series machines, allowing them to face, bevel, compound bevel and counterbore.

FF FLANGE FACER MODELSMODEL FLANGE RANGE (in) FLANGE RANGE (mm)

206 ID 2-6in OD ID 50.8-152.4 mm OD

313 ID 3-13in OD ID 76.2-330.2mm OD

424 ID 4-24in OD ID 101.6-609.4mm OD

FF 206 FLANGE FACERCuts lathe quality surface finishes on flat and raised face flanges in minutes (Record Groove, RMS 500, 250, 125 & 63). These lightweight and compact machines setup quickly and convert to powerful beveling systems. Flanges 2in I.D. (50.8 mm) through 6in O.D. (152.4 mm).

FF 313 FLANGE FACERFlange facing machine for facing raised and flat face flanges from 3in I.D. through 13in O.D. (76.2 mm I.D. through 330.2 mm O.D.). Single point heavy wall pipe 1in (25.4 mm) and greater.

FF 424 FLANGE FACERFlange facing machine for facing raised and flat face flanges from 4in I.D. through 24in O.D. (101.6 mm I.D. through 609.4 mm O.D.). Single point heavy wall pipe 1in (25.4 mm) and greater.

FF FLANGE FACER 424

FF FLANGE FACER 206

FF FLANGE FACER 313

SDB 103 / FF 206 MANDREL KIT




RS-2 RISING STEM PORTABLE VALVE EXERCISER

AIR CADDY AIR TREATMENT MODULE

HANDHELD VALVE EXERCISERSThe RS-2 Portable Valve Operator for rising and non-rising stem valves delivers up to 800 lb-ft torque (1085 Nm) and features new faster operating speeds for quick, reliable opening and closing of water, wastewater, pipeline and petrochemical valves. The RS-2 operates valves from 6in– 60in (ND150-1500) and is available in hydraulic, pneumatic or electric drive. The P-2 hand-held exerciser offers increased productivity, operator safety and valve protection. It’s perfect for hard to reach valves, valve exercising and fast shut downs, delivering controlled power to operate valves 6in (ND600) and up.

OTHER Products & Accessories

EPM ELECTRIC POWER MOTOR

EPD ELECTRIC POWER DRIVE & REMOTE CONTROL

HPU HYDRAULIC POWER UNIT

AIR TREATMENT & CONTROLExtremely portable, these pneumatic accessories condition and regulate the incoming air, and are simple to setup and easy to use at any job site. The Air Control Module (ACM) provides remote operation capability for select models of Wachs pneumatic powered machines, allowing operators to cut and bevel pipe up to 7.9 m (26 feet) away. This significantly reduces fatigue and allows operation from a safer distance, important in highly restricted or hazardous environments.

POWER DRIVE & MOTOR OPTIONSE.H. Wachs offers a wide variety of power drive options including electric, hydraulic and pneumatic. For all of our quality machine tools a smooth, controllable power source is essential for precise weld prep, which is essential to a quality finished weld. Many Wachs machines can be operated with multiple drive types; others are designed for a single or specialized drive type. Whichever machine you rent, O.D. or I.D. mounted, E.H. Wachs has the optimum power solution for your application.

HYDRAULIC POWER UNITSAvailable in Gas, Diesel, or Electric, E.H. Wachs offers a wide variety of hydraulic power units to meet the needs of the project. Cart mount, trailer and skid-mounted power units are available in a variety of sizes and output ranges. E.H. Wachs stocks the equipment you need for the perfect prep.


E.H. WACHS Rental MachinesSDSF SMALL DIAMETER SPLIT FRAME

R80-0000-AX Axial Feed SDSF 1in & 2in Kit PneumaticR80-0000-RA Radial Feed SDSF 1in & 2in Kit PneumaticR80-4000-10 SDSF 1.0 Split FrameR80-4000-20 SDSF 2.0 Split FrameR80-4000-30 SDSF 3.0 Split FrameR80-4000-40 SDSF 4.0 Split Frame

LCSF LOW CLEARANCE SPLIT FRAME & ACCESSORIESR60-000-54 LCSF 204/3 Split FrameR60-000-56 LCSF 206/3 Split FrameR60-000-58 LCSF 408/3 Split FrameR60-000-60 LCSF 610/3 Split FrameR60-000-62 LCSF 612/3 Split FrameR60-000-64 LCSF 814/3 Split FrameR60-000-66 LCSF 1016/3 Split FrameR60-000-70 LCSF 1420/3 Split FrameR60-000-74 LCSF 1824/3 Split FrameR60-000-78 LCSF 2228/3 Split FrameR60-000-82 LCSF 2632/3 Split FrameR60-000-86 LCSF 3036/3 Split FrameR60-000-92 LCSF 3642/3 Split FrameR60-000-98 LCSF 4248/3 Split FrameR60-405-UC Universal Counterbore SlideR60-421-04 Low Clearance Slide Set For LCSF 204/3-1420/3R60-422-01 Extended Slide Set for LCSF 204/3-1420/3R60-428-12 Bridge Slide For LCSF 612/3R60-428-14 Bridge Slide For LCSF 814/3R60-428-16 Bridge Slide For LCSF 1016/3R60-428-20 Bridge Slide For LCSF 1420/3R60-428-24 Bridge Slide For LCSF 1824/3R60-428-28 Bridge Slide For LCSF 2228/3R60-428-32 Bridge Slide For LCSF 2632/3R60-428-36 Bridge Slide For LCSF 3036/3R60-428-42 Bridge Slide For LCSF 3642/3R60-428-48 Bridge Slide For LCSF 4248/3R60-440-00 Super Extended Slide Set for LCSF 1424/3-4248/3R60-451-00 Out-of-Round Pipe Tracking Slide Set, LCSF 610/3-1420/3R60-446-00 Out-of-Round Pipe Tracking Slide Set, LCSF 1824/3-4248/3

HDSF MACHINES & ACCESSORIESRP03-010-1224 12in-24in HDSF Split frame HydraulicRP03-010-436 24in-36in HDSF Split frame HydraulicRP03-010-448 36in-48in HDSF Split frame HydraulicRP03-010-460 48in-60in HDSF Split frame HydraulicRP03-010-472 60in-72in HDSF Split frame HydraulicR60-446-00 Out-of-Round Pipe Tracking Slide Set, HDSF Series

LDSF MACHINES & ACCESSORIESR12-042-5100-075 75in LDSF Split Frame³ HydraulicR12-042-5100-090 90in LDSF Split Frame³ HydraulicR12-042-5100-105 105in LDSF Split Frame³ HydraulicR12-042-5100-120 120in LDSF Split Frame³ Hydraulic

³Includes spring-loaded parting & bevel slide, storage case, and manual

TRAV-L-CUTTERR02-000-01 Trav-L-Cutter Model E PneumaticR02-000-02 Trav-L-Cutter Model HE Hydraulic

GUILLOTINE SAWSR03-000-01 Guillotine Saw Model C Electric 110VR03-000-02 Guillotine Saw Model C PneumaticR03-000-03 Guillotine Saw Model C HydraulicR04-000-01 Guillotine Saw Model D Electric 110VR04-000-02 Guillotine Saw Model D PneumaticR04-000-03 Guillotine Saw Model D HydraulicR24-000-01 Guillotine Saw Super C Electric 110VR24-000-02 Guillotine Saw Super C PneumaticR24-000-03 Guillotine Saw Super C HydraulicR25-000-01 Guillotine Saw Super D PneumaticR25-000-03 Guillotine Saw Super D Hydraulic

EP-424 END PREPR81-000-01 Form Tool EP 424, 4in-16in PneumaticR81-000-02 Form Tool EP 424, 4in-16in HydraulicR81-000-03 Single Point EP 424, 4in-24in PneumaticR81-000-04 Single Point EP 424, 4in-24in Hydraulic

SDB 103/3 BEVELER & FF 206 FLANGE FACERR16-000-01 SDB 103/3 Beveler PneumaticR16-000-02 SDB 103/3 Beveler Electric 110VR16-000-FF FF 206 Flange Facer Pneumatic R16-401-00 SDB 103/3 Small MandrelR16-404-00 SDB 103/3-FF 206 Single Point SlideR16-411-00 SDB 103/3 Pipe Collet MandrelR16-412-00 SDB 103/3 Tube Collet MandrelR16-414-00 SDB 103/3-FF 206 Short Perch MandrelR16-421-00 SDB 103/3-FF 206 Flange Facer Conversion Kit

SDB206/2 BEVELER & FF313 FLANGE FACERR56-000-01 SDB 206/2 Beveler PneumaticR56-000-02 SDB 206/2 Beveler Electric 110VR56-000-FF FF 313 Flange Facer PneumaticR56-302-00 Air Motor For SDB 206/2 & SDB 412/2R56-402-01 Small Blade Mandrel for SDB 206/2 (1.91in-2.46in I.D.)R56-404-00 Single Point Slide for SDB 206/2 & FF 313R56-407-01 8in Extender Kit for SDB 206/2R56-411-01 SDB 206/2 Tube Collet MandrelR56-412-01 SDB 206/2 Pipe Collet MandrelR56-414-01 Short Perch Mandrel (3.00in-6.08in I.D.)R56-415-00 Extender Kit Short Perch Mandrel (6.00in-10.10in I.D.)R56-416-01 Small Short Perch Mandrel (2.00in-3.25in I.D.)R56-421-00 SDB 206-to-FF 313 Flange Facer Conversion Kit

SDB 412/2 BEVELER & FF424 FLANGE FACERR66-000-01 SDB 412/2 Beveler PneumaticR66-000-FF FF 424 Flange Facer PneumaticR66-404-00 Single Point SlideR66-414-01 Short Perch Mandrel (3.75in-12.80in I.D.)R66-415-00 FF 424 Extender Kit For Short Perch Mandrel (12.72in-20.00in I.D.)R66-421-00 SDB 412/2-to-FF 424 Flange Facer Conversion Kit

VALVE EXERCISERSR11-000-02 P-2 Valve Exerciser Electric 110VR11-000-03 P-2 Valve Exerciser PneumaticR11-000-04 P-2 Valve Exerciser HydraulicR11-000-05 P-2 Valve Exerciser Electric 220VR11-000-14 Vitals Ready P-2 Valve Exerciser HydraulicR78-000-01 RS-2 Rising Stem Valve Exerciser Electric 110VR78-000-03 RS-2 Rising Stem Valve Exerciser PneumaticR78-000-04 RS-2 Rising Stem Valve Exerciser Hydraulic

AIR TREATMENT MODULER26-407-00 Air Treatment ModuleR60-420-00 Split Frame Air Control Module

PNEUMATIC & HYDRAULIC DRIVE MOTORSR60-4010-01 2.5 H.P Reversible Air Motor for EICC & Multi Axial Drill.R60-423-01 2-1/2 H.P. Air MotorR60-423-00 1-1/2 H.P. Air MotorR60-424-01 Hydraulic Drive

HYDRAULIC POWER UNITS & HOSESR14-000-02 HCM-1G (8 GPM @ 1500 PSI)4 GasR14-000-06 HCM-2E2 (8GPM @ 1500 PSI)4 Electric 220VR14-000-07 HCM-2E4 (8GPM @ 1500 PSI)4 Electric 440VR14-000-08 HCM-2G Power Unit (10GPM @ 1500 PSI)4 Gas

R14-000-20 HPU-15 Hydrostatic Power Unit with 75ft Cable/Pendant (0-15GPM variable pressure 1500-1800 PSI)4 Electric 440V

R14-000-25 HCM-3G Cart-Mounted HPU (14GPM @ 1500 PSI)4 GasR03-404-00 45ft, 1/2in Hydraulic Hose SetR02-408-00 45ft, 5/8in Hydraulic Hose Set for Trav-L-Cutter

4 Includes hose (R03-404-00)


E.H. WACHS Genuine Wachs Tooling

SDSF SPLIT FRAME TOOLING52-701-01 Single Point Axial Tool²

52-701-01P Premium HSS 3/8in x 3/8in Tool Bit52-701-02 Tool, Offset Dogleg, 3/8in x 3/8in x 1-1/2in, 1in ext.²52-701-03 Tool, Offset Dogleg, 3/8in x 3/8in x 1-1/2in, 1-1/4in ext.²52-703-02 Socket Weld Tool - Medium52-705-01 30º Bevel Tool52-705-03 45º Bevel Tool52-710-02 37.5º Bevel Tool, 3/8 x 1/2 Med.52-710-03 37.5º Bevel Tool, 3/8 x 1/2 Long.52-711-01 .094R Single Point Tool52-711-02 .125R Single Point Tool52-711-03 .188R Single Point Tool

LCSF SPLIT FRAME TOOLING43-702-05 30º X 3-1/8in Inside Bevel Tool43-703-05 37-1/2º X 3-1/8in Inside Bevel Tool43-704-02 Insert Extractor43-707-05 30º Outside Bevel Tool, 3 1/8in Long43-707-06 30º Outside Bevel Tool, 5in Long43-708-05 37.5º Outside Bevel Tool, 3 1/8in Long43-708-06 37.5º Outside Bevel Tool 5in Long43-709-05 Double 30º Bevel Tool, 3 1/8in Long43-709-06 Double 30º Bevel Tool, 5in Long43-710-05 Double 37.5º Bevel Tool, 3 1/8in Long43-710-06 Double 37.5º Bevel Tool X 5in Long43-711-00 HSS Parting Blade., 3/16in x 3 7/16in Long

43-711-00P Premium HSS 3/16in Parting Blade (3 7/16in Long)43-711-01 HSS Parting Tool, 3/16in x 5in Long

43-711-01P Premium HSS 3/16in Parting Blade (5in Long)43-712-01 Inside 10 x 37-1/2º Bit, 4in Long43-712-02 Outside 10 x 37-1/2º Bit, 4in Long53-703-00 Beveling Tool, 37-1/2º, 5in Long

53-703-00P Premium HSS 37-1/2° Inside Bevel Tool (5in long)53-703-01 30-Deg Inside Beveling Tool, 5in Long

53-703-01P Premium HSS 30° Inside Bevel Tool (5in long)53-704-00 Inside 10 x 30 º Bit, 5in Long53-705-00 Inside 10 x 37-1/2º Bit, 5in Long60-711-00 HSS Parting Tool, 1/4in x 6in Long

60-711-00P Premium HSS 1/4in Parting Blade (6in Long)60-712-00 Heavy Wall Carbide Tooling Kit60-712-01 Heavy Wall Carbide Holder60-712-02 Insert Extractor60-712-03 Heavy Wall Insert Parting Kit¹60-712-04 Heavy Wall Carbide Holder¹60-713-00 .313in Wide Insert²60-713-01 .313in Heavy Parting Insert¹²60-714-00 1/4in Carbide Parting Tool Kit60-714-01 1/4in Carbide Holder60-715-00 1/4in Carbide Insert60-716-00 3/16in Carbide Parting Tool Kit60-716-01 3/16in Carbide Holder60-717-00 3/16in Carbide Insert60-718-00 Single Point Holder Kit60-719-00 Bevel Tool, Inside 5in Long 45º60-719-01 Bevel Tool, Inside 5in Long 60º60-720-00 Bevel Tool, Outside - 5in Long 45º60-720-01 Bevel Tool, Outside - 5in Long 60º

TRAV-L-CUTTER TOOLING02-601-00 6in X 3/16in HSS Slitting Saw For Up To 1in Wall02-602-00 7in X 3/16in HSS Slitting Saw For Up To 1 1/2in Wall02-603-00 7in X 9/32in HSS Slitting Saw, Use W/6in Bvl Cutters02-604-00 8in X 3/16in HSS Slitting Saw For Up To 2 1/8in Wall02-605-00 6in x 3/16in Carbide Tipped Saw For Cement Lined Pipe02-606-00 7in x 3/16in Carbide Tipped Saw For Cement Lined Pipe02-607-00 8in x 3/16in Carbide Tipped Saw For Cement Lined Pipe02-608-LH L.H. Bevel 5in X 1/2in X 30º HSS Cutter02-608-RH R.H. Bevel 5in X 1/2in X 30º HSS Cutter02-609-LH L.H. Bevel 5in X 1/2in X 37.5º HSS Cutter02-609-RH R.H. Bevel 5in X 1/2in X 37.5º HSS Cutter

TRAV-L-CUTTER TOOLING02-610-LH L.H. Bevel 6in X 3/4in X 30º HSS Cutter02-610-RH R.H. Bevel 6in X 3/4in X 30º HSS Cutter02-611-LH L.H. Bevel 6in X 3/4in X 37.5º HSS Cutter02-611-RH R.H. Bevel 6in X 3/4in X 37.5º HSS Cutter

GUILLOTINE TOOLING04-402-00 Standard Model D Blade²04-405-01 Carbide Model D Blade²24-405-00 Standard Blade For Super C Guillotine²24-405-01 Carbide Super C Blade²25-402-00 Heavy Duty Blade (For Super D)

SDB 103 TOOLING26-410-02 Facing Tool26-410-03 Facing Tool - Large26-410-04 Facing Tool - Carbide Tip26-411-01 37-1/2º Bevel Tool 1in I.D.26-411-02 37-1/2º Bevel Tool 2in I.D.26-411-03 37-1/2º Bevel Tool 3in I.D.26-411-04 37-1/2º Bevel Tool, Carbide26-412-01 Id Deburring Tool26-412-02 Intermediate Deburring Tool26-412-03 Id Deburring Tool - Large26-426-00 30º Counterbore And Facing Tool26-713-00 20º, 3/32in Radius "J" Tool

SDB 206/412 & EP-424 TOOLING56-708-01 Facing Short Holder Kit56-708-02 Facing Long Holder Kit56-709-01 20º Bevel Holder Kit56-709-02 30º Bevel Holder Kit56-709-03 37-1/2º Bevel Holder Kit56-709-04 45º Bevel Holder Kit56-709-05 20º Hi-Range Holder Kit56-710-00 T-15 Tool Insert56-710-01 SDB 37-1/2º Tool Set56-711-01 HSS Tool Insert56-711-02 HSS J-Prep Tool Insert56-712-01 Carbide Tool Insert56-712-02 Carbide J-Prep Tool Insert56-713-00 4:1 Counterbore Tool56-714-01 Carbide-Single Point Holder Kit56-714-02 Flange Facing-High Range Holder Kit56-714-03 Flange Facing-Low Range Holder Kit56-715-00 Counterbore Holder Kit

¹ Optional² Two Piece Minimum

©2015 RTL-001 1015

YouTube.com/ehwachs

TMYou

Contact your local ITW Orbital Cutting & Welding representative for additional information or to request a product demonstration.

Corporate Locations

Sales Locations

UNITED ARAB EMIRATESWachs Middle East & Africa Operations® E.H. Wachs PO Box 262543 Jebel Ali Free Zone South Dubai FZS 5, ACO6 United Arab Emirates T: +00 971 4 88 65 211 F: +00 971 4 88 65 212

INDIAWachs India® E.H. Wachs / ITW India Private Limited Orbital Cutting & Welding Division 4A/19, IDA Phase-1 Medak District Telangana 502 319 India T: +91 40 3026 1812 F: +91 40 3048 0815

SINGAPOREWachs Asia Pacific® E.H. Wachs / ITW Welding Singapore 23 Tagore Lane #04-06/07 Tagore 23 Warehouse Singapore 787601 Singapore T: +(65) 9634 5432 F: +1 (847) 484 2692

CHINAWachs China® E.H. Wachs / ITW Welding China New Caohejing International Business Centre B-1501 No. 391 Guiping Road Shanghai 200052 China T: +86 (21) 52303751 F: +86 (21) 52303758

GERMANYITW-OCW Europe Headquarters Orbitalum Tools GmbH® E.H. Wachs Sales & Service Center Josef-Schüttler-Straße 17 Singen D78224 Germany T: +49 (0) 77 31 - 792 0 F: +49 (0) 77 31 - 792 500

CANADAWachs Canada Ltd® Eastern Canada Sales, Service & Rental Center 1250 Journey’s End Circle, Unit 5 Newmarket, Ontario L3Y 0B9 Canada T: +1.905.830.8888 F: +1.905.830.6050 Toll Free: 888.785.2000

Wachs Canada Ltd® Western Canada Sales, Service & Rental Center 5411 82 Ave NW Edmonton, Alberta T6B 2J6 Canada T: +1.780.469.6402 F: +1.780.463.0654 Toll Free: 800.661.4235

UNITED KINGDOMWachs UK® UK Sales, Service & Rental Centre Units 4 & 5 Navigation Park Road One, Winsford Industrial Estate Winsford, Cheshire CW7 3RL United Kingdom T: +44 (0) 1606 861 423 F: +44 (0) 1606 556 364

UNITED STATESITW-OCW US Headquarters E.H. Wachs® 600 Knightsbridge Parkway Lincolnshire, IL 60069 USA T: +1.847.537.8800 F: +1.847.520.1147 Toll Free: 800.323.8185

Gulf Coast Sales, Service & Rental Center E.H. Wachs 2220 South Philippe Avenue Gonzales, LA 70737 USA T: +1.225.644.7780 F: +1.225.644.7785

Houston North Sales, Service & Rental Center E.H. Wachs / Wachs Subsea® 15331 Vantage Parkway East Houston, Texas 77032 USA T: +1.713.983.7198 F: +1.713.983.9752

Houston South Sales, Service & Rental Center E.H. Wachs 3414 Lilac Unit E Pasadena, Texas 77505 USA T: +1.713.983.0784 F: +1.713.983.0703

West Coast Sales, Service & Rental Center E.H. Wachs 5130 Fulton Drive, Unit J Fairfield, California 94534 USA T: +1.707.439.3763 F: +1.707.439.3766

East Coast Sales, Service & Rental Center E.H. Wachs 1001 Lower Landing Road, Suite 208 Blackwood, New Jersey 08012 USA T: +1.856.579.8747 F: +1.847.520.1147

o.d. - welcome to e.h. wachs€¦ · parting tool slide used for parting (cutting) ... this machine...

Documents