odisha skill development authority
TRANSCRIPT
ODISHA SKILL DEVELOPMENT AUTHORITY
3rd Floor, Niyojan Bhawan, Unit-III, Bhubaneswar,
Tel : +91 674 2391320, Email : [email protected]
Subject: Proceedings of Virtual Pre – Bid Meeting held on 06th May 2021
Reference: IFB No. Invitation for Bids No.: OSDA/WSC/Goods/M-4/2021 dated 30.04.2021
Ph-IV Shopping Packages under ADB Loan: 3539
1. A Virtual Pre Bid meeting was held on 06th May 2021 at 3 PM in virtual mode (due to Covid–19 travel restrictions) for Shopping packages under procurement of
IV phase Equipment for various labs at World Skill Center Bhubaneswar
2. List of members present in the virtual meeting on behalf of OSDA and bidders is enclosed in Annexure I and II respectively.
3. Dr S. K. Das, GM (Training) welcomed the participants and introduced the project to the prospective bidders present for the pre-bid meeting.
4. The prospective bidders were briefed through a power point presentation containing the key points about the project, packages, instructions for filling of bids etc.
5. It was explained to the bidders that some equipment have been grouped into packages. Bidders are free to participate in any one or multiple packages in
accordance with the instructions, procedures, and the terms and conditions of the RFQ.
6. It was clarified that the bid is invited from eligible and qualified bidder under ADB’s single stage single envelope under shopping procedure which includes no
Processing /tender fees and no supporting document related to financial capability. Only basic information about bidder and contract experience of one similar
contract is required for eligibility.
7. It was informed to the prospective bidders that the duly filled Technical Proposal along with price quotation in specified formats in single envelope is to be
submitted to OSDA office latest by 21.05.2021 at 3 PM. Price Bids shall be opened at 4 PM on same day.
8. The Technical Proposal includes: (1)Duly Filled Bidder’s Information sheet (Annexure 1) (2) Experience Certificate of one contract in the last 5 calendar years
from the date of Quotation Invitation of specified amount of similar nature items.
9. It was clarified that 90% of the contract value shall be released after supply of goods and completion of related services. Remaining 10% of the contract value will
be released after successful training.
10. It was further clarified that the delivery schedule is 90 days from the date of signing of the contract and the warranty of the items will be of minimum 2 years from
the date of issuance of Acceptance Certificate by the Purchaser.
11. It was also explained that conditional offers and late bids will not be accepted.
12. Brands /make/ models/photographs for any equipment, if specified are indicative only. The bidder is free to offer equivalent equipment of other
brands/makes/models subject to fulfilment of technical specifications provided in the bidding documents.
13. After the presentation some prospective bidders raised some queries which were taken up by the officers of OSDA and ADB procurement expert.
14. Some prospective bidders sought clarification on the specification in more detail manner. It was suggested that, the prospective bidders should send their queries
in OSDA mail by 12 Noon of 7th May 2021. These queries shall be compiled and addressed in the form of a corrigendum document and shall be uploaded in the
website for information of all prospective bidders.
15. Many bidders requested to extend the last date of bid submission in the context of the present Covid -19 situation in the state & country. They told, moreover due
to lockdown till 19th May in Odisha and other many states, it may not be possible for them to submit the quotations physically in the OSDA office within the
present last date I,e. 21.5.2021. They were advised that they shall be informed regarding this after due consultation with appropriate authority.
16. The meeting ended with a vote of thanks to the chair and the members.
Encl : Annexure -I (List of members on behalf of OSDA) Annexure -II (List of Prospective Bidders with contact details) Annexure -III (Corrigendum)
-SD-
Chief Executive Officer Odisha Skill Development Authority
Annexure -I
LIST OF OFFICIALS ON BEHALF OF OSDA
(Screenshot of the Virtual Meeting attached in ANNEXURE – IV)
1. Dr S.K.Das, GM Training
2. Sri Sanjay Padhi, GM Project
3. Sri Bibhu Prasad Beura, GM Finance
4. Sri S.K.Goyal, ADB Procurement expert
5. Ms Sushree Sasmita Sahoo, Trainer (ACR), WSC
6. Ms Shubhangee Mishra, Trainer (ACR), WSC
7. Ms Shivanee Prusty, Trainer (Mechatronics), WS
8. Shri Hrudananda Nayak, Trainer (MES), WSC
9. Ms Chinmayee Sabata, Trainer (MES), WSC
10. Ms Parthavi Padhy, Trainer (Mechatronics), WSC
11. Shri Manas Ranjan Parija, Trainer (ACR), WSC
ANNEXURE - II
LIST OF PROSPECTIVE BIDDERS WITH CONTACT DETAILS
(Screenshot of the Virtual Meeting attached in ANNEXURE – IV)
Sl.
No. Name of the Bidder Name of the Representative Email ID Contact No.
1 M/S Lincoln electric Mr. Nipin [email protected] 9789995606
2 M/S Lincoln electric Mr. Kanhu [email protected]
3 M/S Scientech Mr. Nitin Jain [email protected] 9755591500
4 M/S Scientech Mr. Gigo Mathew [email protected]
5 M/S Schneider Electric Mr Amarnath Durgale [email protected] 7947116187
6 M/S Tesca Technologies Pvt. Ltd. Mr. Ashutosh [email protected] 9413330765
7 M/S Tesca Technologies Pvt. Ltd. Mr. Prshant Gogia [email protected]
8 M/S Anshuman Tech Mr. V Ravi [email protected]
9 M/S Techmech Engineers Mr. Niranjan [email protected]
10 M/S Techmech Engineers Ms. Shanthi Sree [email protected]
11 M/S Techmech Engineers Ms. Pushpa Punitha [email protected]
12 M/S Techmech Control Mr K. Ananta [email protected] 9900250083
13 M/S Royal Electronics Sales & Services Mr Tejas Patel [email protected] 9723557876
ANNEXURE – III (CORRIGENDUM)
CORRIGENDUM
Sl. No.
Package Description/Clause
number Bidder’s query/item where modification is proposed OSDA Response/modification
1 Common
for all
packages
Last date of Submission
Extension in the last date of Submission The last date of submission is hereby extended to 10th June 2021-3:00PM (IST). The single envelope consisting of duly filled Technical Proposal along with price quotation received from bidders will be opened on 10th June 2021-4:00PM (IST)
2 Common
for all
packages
Manufacturer’s Authorization
If any bidder offers products and tools from big reputed brands, is submission of their authorization certificate necessary? Mostly big brands usually don't provide authorizations on case to case basis.
The bidder can submit authorization from dealer/distributor/manufacturer affiliates (as the case may be).
3 Common
for all
packages
Contractual Experience
Can a bidder submit contractual experience in more than one contracts which are of similar nature?
One contractual experience of more than required minimum amount in the last 5 calendar years from the date of invitation of RFQ with similar nature is required to be submitted.
4 Common
for all
packages
Part/Complete Package
Do we have to quote for every item in the package? Yes, Quoting for each and every item is mandatory. No item can be left out. The price of the package shall be calculated by adding quoted cost of all the items of the RFQ.
5 23 Item 3 of Attachment 3: Technical Specifications- Micro-Controller Training Model for
Which microcontroller needed? 8051 microcontroller Or PIC microcontroller?
Arduino UNO R3
A. Purpose and application of baking system? B. Need More Details about the system, like Application,
Process, Aim, Features.
The objective is to simulate the baking process in the kitchen where they are conveyors (to bake the cookies) and fans to cool down. Refer to Annexure-A for details of working.
ANNEXURE – III (CORRIGENDUM)
Baking System
Also as per tender specification, shall bidder quote price of the system as a whole or you want us to quote the components independent of system?
Price for the Sl. No. 3. Micro-Controller Training Model for Baking System can be quoted in both ways. Either as a whole operational system which must include all the items from Sl. No. 3.1 to 3.10 or for every item separately.
6 Item 3.1 of Attachment 3: Technical Specifications- Micro-Controller Training Model for Baking System
Training board to have all the components as mentioned in the below details and the board to be supplied should be in operational/assembled form or loose form? Item no. 3.2 to 3.10 to be supplied additionally to 3.1?
Yes, Sl. No. 3.1 - Training unit board is the training model which should contain all the components mentioned in Sl. No. 3.2 to 3.10 and it should be operational/assembled form.
Sl. No. 3.1 is the training board only which will be assembled with items from Sl. No. 3.2 to 3.10.
7 Item 3.10 of Attachment 3: Technical Specifications- Electrical components for Micro-Controller Training Model for Baking System
Electronic components
Arduino UNO R3, 1pc
Resistor 220ohm, 1/4W, 10pcs
Diode, 10pcs
Prototyping board, 5” x 3”, 2pcs
LED, 2pcs
Push button, NO, 2 pcs
Terminal block, 8 way Cables
May be read as: Electronic components
Arduino UNO R3, 1pc
Resistor 220ohm, 1/4W, 10pcs
Diode, 10pcs
Prototyping board, 5” x 3”, 2pcs
LED, 2pcs
Push button, NO, 2 pcs
Terminal block, 8 way
Cables
8 Item 4 of Attachment 3: Technical Specifications. Micro-Controller Training Model for Traffic Light Control System
A. Need More Details about the system, like Application,
Process, Aim, Features.
B. Please clarify that you require supply in loose form or
in assembled form
A. The traffic light system is designed using Arduino UNO R3 /PIC microcontroller, power section, crystal oscillator and light emitting diode (LED). The developed traffic light control system shall be tested by constructing a prototype that resembles the real application which can also be employed as a training kit in learning traffic light control system design and operation. Refer to Annexure-A for details of working.
B. The training Model is to be supplied in assembled form.
ANNEXURE – III (CORRIGENDUM)
9 33
Item 1 of Attachment 3: Technical specifications- Common Tools
Common Tools Each lot shall consist of 10 number of following items:
Wire stripper
Shear, Pruning
Side cutter
Combination plier
Hacksaw
Handsaw (Junior)
Dot punch
File
Scriber
Hammer
Cutter uPVC
Screwdriver, Flat
Screwdriver, Philip
Contact test pen
Measuring tape (5M)
Engineering try square 6” Blade with 45 angle
Safety goggles Detailed specification of every item as given in the document
Common Tools Along with the items mentioned, Each lot shall also consist of 10 number of following two additional items:
Steel rule (300mm) - 300mm, 25mm wide with one round end and eye-hole - Stainless steel, matt finished - mm and inch graduations, on both sides - Metric: 1.00mm - Imperial 1/16.
Brush - Cleaning brush with dust pin
10 Item 4 of
Attachment 3: Technical specifications- Miter saw
Please specify the accessories required. The saw should come with all the accessories. Meant for cutting trunking.
11 Item 6. Punch down tool
Quantity – 1 No. Quantity – 40 Nos.
ANNEXURE – III (CORRIGENDUM)
12 Item 7. Cable cutter 100 mm
Quantity – 1 No. Quantity – 40 Nos.
13 Item 8. Cable jacket stripper
Quantity – 1 No. Quantity – 40 Nos.
14 Item 9. Crimping tool
Quantity – 1 No. Quantity – 40 Nos.
15 Item10. Wire map tester
Quantity – 1 No. Quantity – 20 Nos.
16 Item 14, 29 and 36 of Attachment 3: Technical specifications- Hand tools - For electrical installation work, non-conventional and special electrical systems and motors
Common Tools Each lot shall consist of 10 number of following items: - Wire stripper - Shear, Pruning - Side cutter - Combination plier - Hacksaw - Handsaw (Junior) - Dot punch - File, Flat - Scriber - Hammer, cross-pein (8oz) - Cutter uPVC - Screwdriver, Flat - Screwdriver, Philip - Contact test pen - Measuring tape (5M) - Steel rule (300mm) - Engineering try square 6” Blade with 45 angle
List modified after adding two additional items : Common Tools Each lot shall consist of 10 number of following items:
Wire stripper
Shear, Pruning
Side cutter
Combination plier
Hacksaw
Handsaw (Junior)
Dot punch
File , Flat
Scriber
Hammer
Cutter uPVC
Screwdriver, Flat
Screwdriver, Philip
Contact test pen
Measuring tape (5M) Steel rule (300mm)
Engineering try square 6” Blade with 45 angle Safety goggles
Brush
ANNEXURE – III (CORRIGENDUM)
The detail specifications of each item must be same as “Item 1.Common Tools” of the Package.
17 Item 16 of Attachment 3: Technical specifications- Bench grinder
Quantity – 2 No. Quantity – 1 No.
18 Item 23. Bearing extractor
Related picture The extractor is for extracting the bearing from the motor.
19 36
Throughout the document
FT-MES/ FT-VT/ Electrical Services To be read as: FT-ACR/FT-MES/ FT-VT/ Electrical Services
20 Throughout the document
FT-ACR/ Piping & Plumbing Services To be read as: FT-MES/ Piping & Plumbing Services
21 Throughout the document
FT-ACR/ Building Management Systems To be read as: FT-ACR/ Commercial air-conditioning
22 Item 13 of Attachment 3: Technical Specifications- Battery operated drill
• Approximate 230V 50Hz, 600W – Operating voltage
not possible. It is battery operated so, Voltage will be
12V OR 18V OR 36V DC only. As per need
• keyed chuck – Not possible in battery operated drill. It
will be key less auto locked chuck
The specifications are modified as follows: Drill - 18V Charger 230 V AC
Keyless chuck
23 Item 22 of Attachment 3: Technical
For the Distribution board please specify the switchgear
ratings.
Single Phase Double Pole 63 A MCB , 63A RCCB, 32 A MCB, 20 A MCB, 16A MCB
ANNEXURE – III (CORRIGENDUM)
Specifications-Distribution board
24 Item 30 of Attachment 3: Technical Specifications-Heater, approved electric storage type, 40 L
Request for image
25 Item 31 of
Attachment 3: Technical Specifications-Heater, approved electric instantaneous type for water,1 kW, 2 kW & 3 kW settings
Request for image
26 37 Item 3 of
Attachment 3: Technical Specifications- Centrifugal Water-pump
A. Is electrical starter panel required?
B. What is the total head, flow rate and speed?
C. Is motor single phase or 3 phase?
D. Approximate motor KW/HP and operating voltage?
E. Is motor type IE-2 or IE3?
F. What is the material of construction for pump, casing,
pump shaft and pump internal?
A. No, there’s no need for electrical starter panel B. To be used to identify, rectify defect and maintenance only. It’s
upto the bidder to quote accordingly. C. Motor should be Single Phase. D. 1kW/1.5HP E. Motor type-IE2 F. The material to be used for construction-Cast iron. Must have
Packaging seal.
27 Item 4 of Attachment 3: Technical Specifications-
Thickness of MS Plate required. Thickness of MS Plate must be atleast 8mm.
ANNEXURE – III (CORRIGENDUM)
Water Tank
28 40 Item 11 of Attachment 3: Technical Specifications- Pumping System
Pumping System comprising of: - Water tank, stainless steel, 600 x 600mm, height 1000mm with outlet, cover with door opening, outlet valve, drain off and drain-off valve - 2 numbers 230V single phase ≥1 hp pump with Ø50mm delivery pipe - Water to be re-circulating - C/w control valves, check valves, strainers, hammer arrestors, pipe supports, brackets and isolator
The detailed specifications of the item is modified and attached as Annexure B with the Corrigendum: The Pumping system shall consist of the following items:
I. GRP Potable Water Storage Cistern (with partition)-01 set II. GRP Potable Water Storage Cistern (without partition)--01 set
III. Duplex Horizontal Transfer Pumpsets -05 sets IV. Control Panels for Duplex Horizontal Transfer Pumpsets-05
sets V. Duplex Vertical Booster Pumpsets-05 sets VI. Control Panels for Duplex Vertical Booster Pumpsets--05 sets
VII. Duplex Vertical booster pump with variable speed drive and control panel-01 set
29 41 Item 14 of Attachment 3: Technical Specifications- Thermometers (Dial type)
Thermometers-Detailed Specification Missing Thermometers Dial type To be used on air-conditioner coil 1-3/4 inch diameter dial Stainless steel Analogue, dual scale readings Bottom mount 150mm length probe Range: -40 to 60°C
30 42 Item 1 of Attachment 3: Technical Specifications- Common Hand Tools
Common Hand Tools
Consists of 20 nos of the following items: - Ball-pein hammer - Cross-pein hammer - Mallets - Pliers
The list of items with their detailed specifications of each item are as follows: All the below items are required in 20 nos. each kept in 20 suitable carrying case/tool box.
1. Ball-pein hammer 1.5 lb
ANNEXURE – III (CORRIGENDUM)
- Flat Screwdrivers: - Philip screwdriver - Adjustable spanners - Open end spanners - Shears - File - Measuring tape - Steel rule - Tri-square - Scale rule Detailed Specifications Missing
• Overall length: 300mm • High carbon steel, circular face • Wooden/fibreglass handle with non-slip grip
2. Cross-pein hammer 0.5 lb • Overall length: 250mm • High carbon steel, circular face • Wooden/fibreglass handle with non-slip grip
3. Mallets 1 lb • Approx Overall length 330mm. • Circular face, 65mm. • Wooden/fibreglass handle with non-slip grip
4. Pliers
Size: Approx 170mm overall length Drop-forged & heat treated head, serrated jaws · Cutting capacity: 1.6mm diameter · Material: Chromium nickel and hardened steel cutting · Finish: Fully Polish Finish · Handles: Insulated mould
5. Flat Screwdrivers
Handle: Ergonomically designed grip · Blade: corrosion resistance, chrome, magnetic and hardened tips
ANNEXURE – III (CORRIGENDUM)
· Slotted, · Size: Set of 5 sizes, one each. Approx. 3 x 120mm,4x150mm,5.5x150mm,6.5x200mm and 8x250mm
6. Philip screwdriver
Handle: Ergonomically designed grip · Blade: corrosion resistance, chrome, magnetic and hardened tips · Philip, Set of 8, · Size: Approx #0 x 125mm,#1x100mm,#1x150mm #2x150mm,#2x200,#2x250mm,#3x200mm,#3x250mm
7. Adjustable spanners
Forged, chrome vanadium, chrome plated and fully · Hardened, tempered jaws and mm graduation. • Range: 6 piece set • Forged, chrome vanadium, chrome plated and fully polished • Hardened, tempered jaws and mm graduation. • Each set to comprise the following 6 items: - 1 number of 150mm (6") - 1 number of 200mm (7.87")
ANNEXURE – III (CORRIGENDUM)
- 1 number of 250mm (9.8") - 1 number of 300mm (11.8") - 1 number of 380mm (15") - 1 number of 450mm (17.7")
8. Open end spanners
Metric, 8 piece set • Forged, chrome vanadium, chrome plated and fully polished • hardened, tempered jaws • Open ends set at 15 degree. • Each set to comprise the following 8 items: - 1 number of 6 x 7mm. - 1 number of 8 x 9mm. - 1 number of 10 x 11mm. - 1 number of 12 x 13mm. - 1 number of 14 x 15mm. - 1 number of 16 x 17mm. - 1 number of 18 x 19mm. - 1 number of 20 x 22mm • c/w plastic clip
ANNEXURE – III (CORRIGENDUM)
9. Shears For stripping electrical wire • Approx: 180mm overall length • High carbon steel, straight blades • Rubber coated handle • c/w spring return and lock device for handle
10. File - flat, round and triangle (200mm)
Flat
Round
Triangle
ANNEXURE – III (CORRIGENDUM)
11. Measuring tape · 5.0m X 25mm width metal tape · Lockable, retractable · c/w plastic casing and carrying strap
12. Steel rule • 300mm, 25mm wide with one round end and eye-hole • Stainless steel, matt finished • mm and inch graduations, on both sides • Metric: 1.00mm • Imperial 1/16.
13. Tri-square · Engineering try square 6” blade · All metal · 150mm blade · 90 degree and 45 degree level · Grade B, notched · Hardened steel blade · Cast zinc handle · c/w graduations in mm and inch on blade
ANNEXURE – III (CORRIGENDUM)
14. Scale rule • 1000mm (L) x 30 (W) x 1.2mm (T) with one round end and eye-hole • Stainless steel, matt finished • mm and inch graduations, on both sides • Metric: 1.00mm • Imperial 1/16.
31 Item 2 of Attachment 3: Technical specifications- Common Hand Tools
Consists of 20 nos of the following items: - Round files - Flat files - Gimlets - Junior type Hacksaws - Standard-type Hacksaw - Ball-pein hammer - Cross-pein hammer - Mallets - Pliers - Flat Screwdrivers: - Philip screwdriver - Side-Cutters - Adjustable spanners - Open end spanners - Measuring tape - Steel rule - Shears - Tri-square - Oxy-Acetylene Cylinder keys Detailed Specifications Missing
The list of items is modified by excluding some items. The modified list of items with detailed specifications of each item are as follows: All the below items are required in 20 nos. each kept in 20 suitable carrying case/tool box.
1. Round files , second cut • 200mm blade, Double cut • Steel, case hardened • Handle: non-wood, high impact plastic with good ergonomic grip • c/w eye-hole for storage
2. Flat files , second cut • 250mm blade, Double cut • Steel, case hardened • Handle: non-wood, high impact plastic with good ergonomic grip • c/w eye-hole for storage
3. Junior type Hacksaws • Blade length: approx 150mm • Heavy duty frame (wire frame not acceptable) with pistol grip • c/w 32 TPI blade and 10 numbers of spare blades per saw
ANNEXURE – III (CORRIGENDUM)
4. Standard-type Hacksaw
· Blade length: approx 300mm · Overall Assembly Length: 460 mm approx. · Pistol grip handle · Steel adjustable frame · c/w 24 TPI flexible blade including 5 numbers of spare
5. Ball-pein hammer
1.5 lb • Overall length: 300mm • High carbon steel, circular face • Wooden/fibreglass handle with non-slip grip
6. Cross-pein hammer 0.5 lb • Overall length: 250mm • High carbon steel, circular face • Wooden/fibreglass handle with non-slip grip
7. Mallets 1 lb • Approx Overall length 330mm. • Circular face, 65mm. • Wooden/fibreglass handle with non-slip grip
ANNEXURE – III (CORRIGENDUM)
8. Pliers
Size: Approx 170mm overall length Drop-forged & heat treated head, serrated jaws · Cutting capacity: 1.6mm diameter · Material: Chromium nickel and hardened steel cutting · Finish: Fully Polish Finish · Handles: Insulated mould
9. Flat Screwdrivers
Handle: Ergonomically designed grip · Blade: corrosion resistance, chrome, magnetic and hardened tips · Slotted, · Size: Set of 5 sizes, one each. Approx. 3 x 120mm,4x150mm,5.5x150mm,6.5x200mm and 8x250mm
10. Philip screwdriver
Handle: Ergonomically designed grip · Blade: corrosion resistance, chrome, magnetic and hardened tips
ANNEXURE – III (CORRIGENDUM)
· Philip, Set of 8, · Size: Approx #0 x 125mm,#1x100mm,#1x150mm #2x150mm,#2x200,#2x250mm,#3x200mm,#3x250mm
11. Side-Cutters
• Insulated • Diagonal type • Approx 170mm overall length • Drop-forged & heat treated head • Cutting capacity: 1.6mm diameter • Material: Chromium nickel and hardened steel cutting face • Handles: Insulated mould
12. Adjustable spanners
Forged, chrome vanadium, chrome plated and fully · Hardened, tempered jaws and mm graduation. • Range: 6 piece set 5 Set • Forged, chrome vanadium, chrome plated and fully polished
ANNEXURE – III (CORRIGENDUM)
• Hardened, tempered jaws and mm graduation. • Each set to comprise the following 6 items: - 1 number of 150mm (6") - 1 number of 200mm (7.87") - 1 number of 250mm (9.8") - 1 number of 300mm (11.8") - 1 number of 380mm (15") - 1 number of 450mm (17.7")
13. Open end spanners
Metric, 8 piece set • Forged, chrome vanadium, chrome plated and fully polished • hardened, tempered jaws • Open ends set at 15 degree. • Each set to comprise the following 8 items: - 1 number of 6 x 7mm. - 1 number of 8 x 9mm. - 1 number of 10 x 11mm. - 1 number of 12 x 13mm. - 1 number of 14 x 15mm. - 1 number of 16 x 17mm. - 1 number of 18 x 19mm. - 1 number of 20 x 22mm • c/w plastic clip
ANNEXURE – III (CORRIGENDUM)
15. Measuring tape · 5.0m X 25mm width metal tape · Lockable, retractable · c/w plastic casing and carrying strap
16. Steel rule • 300mm, 25mm wide with one round end and eye-hole • Stainless steel, matt finished • mm and inch graduations, on both sides • Metric: 1.00mm • Imperial 1/16.
14. Shears For stripping electrical wire • Approx: 180mm overall length • High carbon steel, straight blades • Rubber coated handle • c/w spring return and lock device for handle
ANNEXURE – III (CORRIGENDUM)
15. Tri-square
· Engineering try square 6” blade · All metal · 150mm blade · 90 degree and 45 degree level · Grade B, notched · Hardened steel blade · Cast zinc handle · c/w graduations in mm and inch on blade
32 Item 3 of
Attachment 3: Technical Specifications- Common Hand Tools
Modification in the quantity of each item in the list All the items mentioned in the detailed specifications of the item are required in 20 nos. each kept in 20 suitable carrying case/tool box.
33 Item 4 of Attachment 3: Technical Specifications- Common Hand Tools
Consists of 20 nos of the following items: • Pliers • Flat screwdrivers • Philip screwdriver • Side-cutters • Adjustable spanners
The list of items is modified by excluding some items. The modified list with detailed specifications of each item are as follows: All the items are required in 20 nos (except Wire Stripper, Crimping Tool & Adjustable spanner, which are required 40 Numbers each). Each item to be kept in 20 suitable carrying case/tool box.
ANNEXURE – III (CORRIGENDUM)
• Open end spanners • Measuring tape • Steel rule • Wire Stripper • Crimping Tool • Adjustable spanner Detailed Specifications Missing
1. Pliers Size: Approx 170mm overall length Drop-forged & heat treated head, serrated jaws · Cutting capacity: 1.6mm diameter · Material: Chromium nickel and hardened steel cutting · Finish: Fully Polish Finish · Handles: Insulated mould
2. Philip screwdriver Handle: Ergonomically designed grip · Blade: corrosion resistance, chrome, magnetic and hardened tips · Philip, Set of 8, · Size: Approx #0 x 125mm,#1x100mm,#1x150mm #2x150mm,#2x200,#2x250mm,#3x200mm,#3x250mm
3. Side-cutters
• Insulated • Diagonal type • Approx 170mm overall length • Drop-forged & heat treated head • Cutting capacity: 1.6mm diameter
ANNEXURE – III (CORRIGENDUM)
• Material: Chromium nickel and hardened steel cutting face • Handles: Insulated mould
4. Open end spanners
Metric, 8 piece set • Forged, chrome vanadium, chrome plated and fully polished • hardened, tempered jaws • Open ends set at 15 degree. • Each set to comprise the following 8 items: - 1 number of 6 x 7mm. - 1 number of 8 x 9mm. - 1 number of 10 x 11mm. - 1 number of 12 x 13mm. - 1 number of 14 x 15mm. - 1 number of 16 x 17mm. - 1 number of 18 x 19mm. - 1 number of 20 x 22mm • c/w plastic clip
ANNEXURE – III (CORRIGENDUM)
5. Measuring tape · 5.0m X 25mm width metal tape · Lockable, retractable · c/w plastic casing and carrying strap
6. Steel rule • 300mm, 25mm wide with one round end and eye-hole • Stainless steel, matt finished • mm and inch graduations, on both sides • Metric: 1.00mm
• Imperial 1/16.
7. Wire Stripper · For electrical wiring work use · Overall length: approx. 180mm · Cable insulation stripper with handles lockable · Spring loaded · Suitable for wire gauge AWG 22 ~10(0.5mm2 ~ 4mm2 cable)
8. Crimping Tool
· Use as crimping insulated electrical wire terminal lugs, wire cutter and cable stripper · Suitable for cable size of 1.5, 2.5, and 6mm2
ANNEXURE – III (CORRIGENDUM)
9. Adjustable spanner
Forged, chrome vanadium, chrome plated and fully · Hardened, tempered jaws and mm graduation. • Range: 6 piece set 5 Set • Forged, chrome vanadium, chrome plated and fully polished • Hardened, tempered jaws and mm graduation. • Each set to comprise the following 6 items: - 1 number of 150mm (6") - 1 number of 200mm (7.87") - 1 number of 250mm (9.8") - 1 number of 300mm (11.8") - 1 number of 380mm (15") - 1 number of 450mm (17.7")
34 Item 5 of
Attachment 3: Technical Specifications-Common Hand Tools
Consists of 20 nos of the following items: • Round files • Flat file • Gimlets •Junior type Hacksaws • Standard-type Hacksaw • Ball-pein hammer • Cross-pein hammer
The list of items is modified by excluding some items. The modified list with detailed specifications of each item are as follows: All the below mentioned items are required in 20 nos each kept in 20 suitable carrying case/tool box
1. Round files second cut • 200mm blade, Double cut • Steel, case hardened
ANNEXURE – III (CORRIGENDUM)
• Mallets • Pliers • Flat Screwdrivers: • Philip screwdriver • Side-Cutters • Adjustable spanners • Open end spanners •Measuring tape • Steel rule • Wire Stripper • Crimping Tool • Insulated side cutter (wire cutter) • Insulated Combination Pliers • Insulated Long Nose Pliers • Soldering Iron • F-Shape spanners • Shears • Tri-square • Oxy-Acetylene Cylinder keys • Spark gun • Box spanner • Pipe wrench • PVC cutter Detailed Specifications Missing
• Handle: non-wood, high impact plastic with good ergonoic grip
• c/w eye-hole for storage
2. Flat file second cut • 250mm blade, Double cut • Steel, case hardened • Handle: non-wood, high impact plastic with good ergonoic grip • c/w eye-hole for storage
3. Junior type Hacksaws • Blade length: approx 150mm • Heavy duty frame (wire frame not acceptable) with pistol grip • c/w 32 TPI blade and 10 numbers of spare blades per saw
4. Standard-type Hacksaw
· Blade length: approx 300mm · Overall Assembly Length: 460 mm approx. · Pistol grip handle · Steel adjustable frame · c/w 24 TPI flexible blade including 5 numbers of spare
5. Ball-pein hammer
1.5 lb • Overall length: 300mm
ANNEXURE – III (CORRIGENDUM)
• High carbon steel, circular face • Wooden/fibreglass handle with non-slip grip
6. Cross-pein hammer 0.5 lb • Overall length: 250mm • High carbon steel, circular face • Wooden/fibreglass handle with non-slip grip
7. Mallets 1 lb • Approx Overall length 330mm. • Circular face, 65mm. • Wooden/fibreglass handle with non-slip grip
8. Pliers
Size: Approx 170mm overall length Drop-forged & heat treated head, serrated jaws · Cutting capacity: 1.6mm diameter · Material: Chromium nickel and hardened steel cutting · Finish: Fully Polish Finish · Handles: Insulated mould
9. Flat Screwdrivers
Handle: Ergonomically designed grip · Blade: corrosion resistance, chrome, magnetic and hardened tips · Slotted,
ANNEXURE – III (CORRIGENDUM)
· Size: Set of 5 sizes, one each. Approx. 3 x 120mm,4x150mm,5.5x150mm,6.5x200mm and 8x250mm
10. Philip screwdriver
Handle: Ergonomically designed grip · Blade: corrosion resistance, chrome, magnetic and hardened tips · Philip, Set of 8, · Size: Approx #0 x 125mm,#1x100mm,#1x150mm #2x150mm,#2x200,#2x250mm,#3x200mm,#3x250mm
11. Side-Cutters
• Insulated • Diagonal type • Approx 170mm overall length • Drop-forged & heat treated head • Cutting capacity: 1.6mm diameter • Material: Chromium nickel and hardened steel cutting face • Handles: Insulated mould
ANNEXURE – III (CORRIGENDUM)
12. Adjustable spanners
Forged, chrome vanadium, chrome plated and fully · Hardened, tempered jaws and mm graduation. • Range: 6 piece set 5 Set • Forged, chrome vanadium, chrome plated and fully polished • Hardened, tempered jaws and mm graduation. • Each set to comprise the following 6 items: - 1 number of 150mm (6") - 1 number of 200mm (7.87") - 1 number of 250mm (9.8") - 1 number of 300mm (11.8") - 1 number of 380mm (15") - 1 number of 450mm (17.7")
13. Open end spanners
Metric, 8 piece set • Forged, chrome vanadium, chrome plated and fully polished • hardened, tempered jaws
ANNEXURE – III (CORRIGENDUM)
• Open ends set at 15 degree. • Each set to comprise the following 8 items: - 1 number of 6 x 7mm. - 1 number of 8 x 9mm. - 1 number of 10 x 11mm. - 1 number of 12 x 13mm. - 1 number of 14 x 15mm. - 1 number of 16 x 17mm. - 1 number of 18 x 19mm. - 1 number of 20 x 22mm • c/w plastic clip
14. Measuring tape · 5.0m X 25mm width metal tape · Lockable, retractable · c/w plastic casing and carrying strap
15. Steel rule • 300mm, 25mm wide with one round end and eye-hole • Stainless steel, matt finished
ANNEXURE – III (CORRIGENDUM)
• mm and inch graduations, on both sides • Metric: 1.00mm • Imperial 1/16.
16. Wire Stripper · For electrical wiring work use · Overall length: approx. 180mm · Cable insulation stripper with handles lockable · Spring loaded · Suitable for wire gauge AWG 22 ~10(0.5mm2 ~ 4mm2 cable)
17. Crimping Tool
· Use as crimping insulated electrical wire terminal lugs, wire cutter and cable stripper · Suitable for cable size of 1.5, 2.5, and 6mm2
18. Insulated side cutter (wire cutter)
• Diagonal type • Approx 170mm overall length • Drop-forged & heat treated head • Cutting capacity: 1.6mm diameter • Material: Chromium nickel and hardened steel cutting face • Handles: Insulated mould
ANNEXURE – III (CORRIGENDUM)
19. Insulated Combination Pliers
· Size: Approx 170mm overall length Drop-forged & heat treated head, serrated jaws · Cutting capacity: 1.6mm diameter · Material: Chromium nickel and hardened steel cutting · Finish: Fully Polish Finish · Handles: Insulated mould
20. Insulated Long Nose Pliers
· Size: Approx 165mm overall length · Drop-forged & heat treated head, serrated jaws · Cutting capacity: 1.6mm diameter · Chromium nickel and hardened steel cutting face · Finish: Fully Polish Finish · Handles: Insulated mould
ANNEXURE – III (CORRIGENDUM)
21. Soldering Iron
• Adjustable temperature • Pointed soldering iron tip • Iron holder, on/off switch, adjustable 5 to 10W and cleaning sponge in 1 unit • c/w 1 spare tip and approved power cord with fused 13A plug, 230 Volts AC
22. Shears
For stripping electrical wire • Approx: 180mm overall length • High carbon steel, straight blades • Rubber coated handle • c/w spring return and lock device for handle
ANNEXURE – III (CORRIGENDUM)
23. Tri-square
· Engineering try square 6” blade · All metal · 150mm blade · 90 degree and 45 degree level · Grade B, notched · Hardened steel blade · Cast zinc handle · c/w graduations in mm and inch on blade
24. Spark gun
Material-Stainless Steel
Electronic igniter-Safe and Reliable
long shaft for safe ignition distance
ANNEXURE – III (CORRIGENDUM)
25. Box spanner • Tubular • Metric • 8 piece set - 8 x 9 - 10 x 11 - 12 x 13 - 14 x 15 - 16 x 17 - 18 x 19 - 21 x 23 - 24 x 26
26. Pipe wrench
· Stilson type · Approx 12 inch · Drop-forged handle · Hardened teeth · c/w adjusting nut and hook jaws
27. PVC cutter
· For galvanised steel pipe or electrical metal conduit · 1/8 to 2 inch pipe · Heavy duty wide roller type for better tracking · c/w wheel cutter and 2 spare.
ANNEXURE – III (CORRIGENDUM)
35 43
Throughout the document
Item 5: Common tools Quantity – 20 sets
Item 5: Common tools Quantity– 1 set
36 Item 2.50 of Attachment 3: Technical Specifications- Tongs, Welding
Quantity missing Quantity – 20 nos.
37 Item 4.9 of Attachment 3: Technical Specifications-Chasis Puncher
Detail Specification missing Chasis Puncher
Set of 5
For 16, 18, 21, 25, 30mm external diameter
Including reamer
HSS material
suitable for removing mechanical seals
38 Item 4.30 of
Attachment 3: Technical Specifications-Insulated Combination Plier
Quantity missing Quantity – 40 nos.
39 Item 4.31 of Attachment 3: Technical Specifications-
Quantity missing Quantity – 40 nos.
ANNEXURE – III (CORRIGENDUM)
Insulated Long Nose Plier
40 Item 5.1 of Attachment 3: Technical Specifications-Automatic wire stripper
Quantity missing Quantity – 40 nos
41 Item 5.2 of Attachment 3: Technical Specifications-Crimping tool
Quantity missing Quantity – 40 nos
42 46
Throughout the document
FT-MES/ FT-VT/ Electrical Services To be read as: FT-ACR/FT-MES/ FT-VT/ Electrical Services
43 Item 2 of Attachment 3: Technical Specifications- Mechanical Lifting Jack
Detail Specification missing Hand pallet, Capacity:2000 kg
1200mm length * 150mm width for each fork
Approx: 650 mm width of truck with double rollers
44 Item 31 of
Attachment 3: Technical Specifications- Tile cutter
Detail Specification missing 240V, 50Hz, 500W
C/w dry cutter and accessories
ANNEXURE – III (CORRIGENDUM)
45 Item 37 of Attachment 3: Technical Specifications-Gasket hand lever punch
Image missing
46 Item 38 of
Attachment 3:
Technical
Specifications-
Bearing pulling
attachment
Image missing
47 Item 39 of
Attachment 3:
Technical
Specifications-
Metal jack plane
Image missing
48 Item 72 of
Attachment 3:
Technical
Specifications-
Cutter, GI pipe, dia
10 - 75 mm, single
wheel cutting blade
Image missing
ANNEXURE – III (CORRIGENDUM)
49 Item 73 of
Attachment 3:
Technical
Specifications-
Cutter, for copper
tube, quick action
stock 3-32mm
Image missing
50 Item 75 of
Attachment 3:
Technical
Specifications-
Expander kit,
(Swagging) for
water supply copper
tube, single-stage,
free-floating and
self-centring
mechanism
Image missing
51 47
Item 10 of Attachment 3: Technical Specifications- Torque wrench
Quantity – 15 Nos. Quantity – 10 Nos.
52 Item 23 of Attachment 3: Technical Specifications- Torque wrench
Quantity – 15 Nos. Quantity – 5 Nos.
53 Item 24 of Attachment 3: Technical Specifications-
Common hand tools: - Adjustable spanner (300mm) - Open-end spanner - Screwdriver, slotted
The list of items is modified by excluding/adding some items. The new list with detailed specifications of each item is as follows: Common hand tools: Each set consists of 1 no. of each of the following items:
ANNEXURE – III (CORRIGENDUM)
Common hand tools 5.5 x 150 mm 6.5 x 200 mm 8 x 250 mm - Screwdriver, Philips 2 x 250 mm 3 x 200 mm 3 x 250 mm - Allen Key Set (Metrix) - Combination plier (170mm) - Long nose plier (160mm) - Tubing cutter - Screw Driver, Torx, T10 Detailed Specification missing
24.1 Adjustable spanner (100-150mm)
24.2. Open-end spanner (set) Metric, 6 pieces per set • Deep crank, 12 pt • Forged, chrome plated and fully polished • hardened and tempered • Each set to comprise the following 6 items: - 1 number of 10 x 11mm. - 1 number of 12 x 13mm. - 1 number of 14 x 15mm. - 1 number of 16 x 17mm. - 1 number of 18 x 19mm. - 1 number of 20 x 22mm. • c/w wall mountable plastic rack.
24.3. Allen Key Set (Metrix)
Range, 13 piece set
L-shaped
One ball end
Chrome vanadium or black
c/w plastic case/holder
Sizes include: 1.27, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 8 and
ANNEXURE – III (CORRIGENDUM)
10mm
24.4. Combination plier (170mm)
Size: Approx 170mm overall length
Drop-forged & heat treated head, serrated jaws
Cutting capacity: 1.6mm diameter
Material: Chromium nickel and hardened steel cutting
Finish: Fully Polish Finish
Handles: Insulated mould
24.5. Long nose plier (160mm)
Size: Approx 160mm overall length
Drop-forged & heat treated head, serrated jaws
Cutting capacity: 1.6mm diameter
Chromium nickel and hardened steel cutting face
Finish: Fully Polish Finish
Handles: Insulated mould
ANNEXURE – III (CORRIGENDUM)
24.6. Plastic Tubing cutter
54 Item 26 of
Attachment 3: Technical Specifications- Portable Drill
Quantity – 2 nos. The item is now deleted from the package.
55 Item 28 of Attachment 3: Technical Specifications- Common tools
Common Tools Include each of the following items: - Wire stripper - Shear, Pruning - Side cutter - Combination plier - Hacksaw - Handsaw (Junior) - Dot punch - File, Flat - Scriber - Hammer, cross-pein (8oz) - Cutter uPVC - Screwdriver, Flat - Screwdriver, Philip - Contact test pen - Measuring tape (5M) - Steel rule (300mm) - Engineering try square 6” Blade with 45 angle - Safety goggles - Brush
The list of items is modified by excluding/adding some items and after making certain changes in the detailed specifications. The new list with detailed specifications of each item is as follows: Common tools Each set include 1 no. of the following items:
28.1. Wire stripper · For electrical wiring work use · Overall length: approx. 180mm · Cable insulation stripper with handles lockable · Spring loaded · Suitable for wire gauge AWG 22 ~10(0.5mm2 ~ 4mm2 cable)
28.2. Shear, Pruning (10x) For stripping electrical wire
ANNEXURE – III (CORRIGENDUM)
•Approx: 180mm overall length • High carbon steel, straight blades • Rubber coated handle • c/w spring return and lock device for handle
28.3. Side cutter (110 to 150mm) • Drop-forged & heat treated head • Cutting capacity: 1.6mm diameter • Material: Chromium nickel and hardened steel cutting face • Handles: Insulated mould
28.4. Combination plier 170mm · Size: Approx 170mm overall length · Drop-forged & heat treated head, serrated jaws · Cutting capacity: 1.6mm diameter · Material: Chromium nickel and hardened steel cutting · Finish: Fully Polish Finish · Handles: Insulated mould
ANNEXURE – III (CORRIGENDUM)
28.5. Hacksaw (300mm) · Blade length: approx 300mm · Overall Assembly Length: 460 mm approx. · Pistol grip handle · Steel adjustable frame · c/w 24 TPI flexible blade including 5 numbers of spare
28.6. Handsaw (Junior) (150mm) • Blade length: approx 150mm • Heavy duty frame (wire frame not acceptable) with pistol grip • c/w 32 TPI blade and 10 numbers of spare blades per saw
28.7. Dot punch (for metal) · Length: approx. 100mm X 3mm diameter tip · Heavy duty tool steel, hardened & tempered point · Point angle 60°
28.8. File, Flat (200mm)
ANNEXURE – III (CORRIGENDUM)
Steel, case hardened
Handle: non-wood, high impact plastic with good ergonoic grip
c/w eye-hole for storage
28.9. Scriber
Two-point
220mm overall length
straight and bent pointed, hardened and tempered steel c/w knurled grip
28.10. Hammer, cross-pein (8oz) • Overall length: 300mm • High carbon steel, circular face • Wooden/fibreglass handle with non-slip grip
28.11. Screwdriver, Flat (200-220mm)
corrosion resistance, chrome, magnetic and hardened tips
ANNEXURE – III (CORRIGENDUM)
28.12. Screwdriver, Philip (200-220mm) corrosion resistance, chrome, magnetic and hardened tips
28.13. Contact test pen (120-140mm) • Testing AC Voltage: 100 to 500V • Built-in neon lamp • Plastic handle, tempered steel shaft with screwdriver blade • CE certified
28.14. Measuring tape (5M) · 5.0m X 25mm width metal tape · Lockable, retractable · c/w plastic casing and carrying strap
28.15. Steel rule (300mm)
ANNEXURE – III (CORRIGENDUM)
• 300mm, 25mm wide with one round end and eye-hole • Stainless steel, matt finished • mm and inch graduations, on both sides • Metric: 1.00mm • Imperial 1/16.
28.16. Engineering try square (200mm)
28.17. 6” blade with 45 angle
28.18. Safety spectacles • Spectacle design or fit-over type • Lens & Frame materials: PC • Lens colour: Clear • Standard: EN166 (Resistance to foging and surface damage) • c/w full side and brow protection design
28.19. Cleaning brush with dust pin
ANNEXURE – III (CORRIGENDUM)
56 Item 38 of Attachment 3: Technical Specifications- File
• 200mm blade, Double cut, taper thickness, 1 safe edge • Steel, case hardened • Handle: non-wood, high impact ergonoic rubber grip with inserts • c/w eye-hole for storage Image missing
The detailed specification of the item is modified as follows: File: flat, round and triangle (200mm) Flat
Round
Triangle
57 Item 42 of Attachment 3: Technical
Brush
For cleaning file and hot metal use
Length: 250mm overall, including handle.
The detailed specification of the item is modified as follows: Brush
Cleaning brush with dust pin
ANNEXURE – III (CORRIGENDUM)
Specifications- Brush
Handle: wood.
Bristles: galvanised steel wires
4 rows of 16 tufts
58 Item 54.8 of Attachment 3: Technical Specifications- Spring Divider
Spring Divider For inserting into PVC conduits for bending purpose • 600mm overall length • To be fabricated if not available off-the-shelf • For bending Ø20mm and Ø25mm PVC conduits • Robust 2mm square section spring steel • Corrosion resistant, electroplated finish • For heavy duty applications • Complete with fastening eye
Irrelevant Image
The detailed specification of the item is modified as follows: Spring Divider
100mm
59 Item 54.26 of Attachment 3: Technical Specifications- Brush
Brush
For cleaning file and hot metal use
Length: 250mm overall, including handle.
Handle: wood or plastic.
Bristles: thick tuft, natural husk or artificial.
c/w eyehole for hanging.
The detailed specification of the item is modified as follows: Brush
Cleaning brush with dust pin
ANNEXURE – III (CORRIGENDUM)
60 Item 54.27 of Attachment 3: Technical Specifications- Countersunk Bit
Quantity – 20 nos. The item is now deleted from the package.
61 Item 54.28 of Attachment 3: Technical Specifications- Countersunk Bit
Quantity – 20 nos. The item is now deleted from the package.
62 Item 55.6 of Attachment 3: Technical Specifications- Grease Gun
Quantity – 5 nos. The item is now deleted from the package.
63 Throughout the document Item 57: Common Hand tools
Quantity – 2 Sets Quantity – 1 Set
64 Item 57 of Attachment 3: Technical Specifications- Common Hand tools
Common Hand Tools Each set shall consists of following items: Adjustable spanner (300mm) Open-end spanner Screwdriver, slotted Screwdriver, Philips Allen Key Set (Metrix)
The list of items is modified by excluding/adding some items and after modifications in the detailed specifications. The new list with detailed specifications of each item is as follows: Common tools Common tools include 40 nos. of each the following items:
57.1. Screwdriver, Flat
Flat (170-200mm)
ANNEXURE – III (CORRIGENDUM)
Combination plier (170mm) Long nose plier (160mm) Tubing cutter
corrosion resistance, chrome, magnetic and hardened tips
57.2. Wire stripper
For electrical wiring work use
Overall length: approx. 180mm
Cable insulation stripper with handles lockable
Spring loaded
Suitable for wire gauge AWG 22 ~10(0.5mm2 ~ 4mm2 cable)
65 Item 58 of Attachment 3: Technical Specifications- Common Hand tools
Common Hand Tools Each set shall consists of following items: Adjustable spanner (300mm) Open-end spanner Screwdriver, slotted Screwdriver, Philips Allen Key Set (Metrix) Combination plier (170mm) Long nose plier (160mm) Tubing cutter
The list of items is modified after excluding/adding some items and after modifying changes in the detailed specifications. The new list with detailed specifications of each item is as follows: Common tools Each set shall consists of 1 no. of each of the following items:
58.1. Screwdriver, Flat
Flat (170-200mm)
corrosion resistance, chrome, magnetic and hardened tips
ANNEXURE – III (CORRIGENDUM)
58.2. Screwdriver, Philips
Philips (200-220mm)
corrosion resistance, chrome, magnetic and hardened tips
58.3. Spanner Adjustable (8inch)
66 Item 60 of Attachment 3: Technical Specifications- Common Hand tools
Common Hand Tools Each set shall consists of following items: Adjustable spanner (300mm) Open-end spanner Screwdriver, slotted Screwdriver, Philips Allen Key Set (Metrix) Combination plier (170mm) Long nose plier (160mm) Tubing cutter
The list of items is modified after excluding/adding some items and by making certain changes in the detailed specifications. The new list with detailed specifications of each item is as follows: Common tools Each set shall consists of 1 no. of each of the following items:
60.1. Screwdriver, Flat
Flat (170-200mm)
corrosion resistance, chrome, magnetic and hardened tips
60.2. Screwdriver, Philips
Philips (200-220mm)
corrosion resistance, chrome, magnetic and hardened tips
60.3. Spanner Adjustable (8inch)
67 Item 61 of Attachment 3:
Stop Watch - Analog type
Stop Watch -Digital
ANNEXURE – III (CORRIGENDUM)
Technical Specifications- Stop Watch
68 49 Item 1.9 of Attachment 3: Technical Specifications- Electrical wiring
1. Required Tip diameter: 2mm / 4mm? 2. Required Current Rating for each cable? 3. Required Connector type: Male or female for each
cable?
1. The tip diameter should be 4mm 2. The current Rating for each cable should be 5 A 3. Male type connector is required because the Electric Liquid
Level Control Rig has the female type connector.
6
Annexure-A (Baking system and Traffic light system)
Baking System – Pin Assignments
Arduino UNO Baking System Pin Direction
D3 Conveyor 1_1 (Motor Driver 1) Output
D4 Conveyor 1_2 (Motor Driver 1) Output
D5 Conveyor 2_1 (Motor Driver 2) Output
D6 Conveyor 2_2 (Motor Driver 2) Output
D7 Act (LED) Output
D8 Green Light (G LED) Output
D9 Red Light (R LED) Output
D10 Fan (LED) Output
D11 Buzzer Output
D12 Sensor 1 (Button) Input
D13 Heater (LED) Output
A0 Start Button (Button) Input
A1 Stop Button (Button) Input
A2 Sensor 2 (Button) Input
A3 Sensor 3 (Button) Input
A4 Sensor 4 (Button) Input
A5 Sensor 5 (Button) Input
8
Annexure-A (Baking system and Traffic light system)
Baking System– Driver
Driver and Stepper motor used
here is 28BYJ‐48
Stepper Motor with ULN2003
Driver
1
Annexure-A (Baking system and Traffic light system)
Motor1
ULN 2003Driver
Motor2
ULN 2003Driver
D3
D4
Uno D5
D6
3
Annexure-A (Baking system and Traffic light system)
Traffic Light – Pin Assignments
Arduino Pin Traffic Light System Pin Direction
D2 East‐West Green Output
D3 East‐West Amber Output
D4 East‐West Red Output
D5 North‐South Red Output
D6 North‐South Amber Output
D7 North‐South Green Output
D8 West‐East Red Output
D9 West‐East Amber Output
A0 Vehicle 2 Button Input
A3 West East Right Turn Output
A4 West East Green Output
A5 Vehicle 1 Button Input
5
Annexure-B (Pumping system)
Pumping system
Detailed Specifications:
The Pumping system shall consist of the following items:
I. GRP Potable Water Storage Cistern (with partition)-01 set
II. GRP Potable Water Storage Cistern (without partition)-01 set
III. Duplex Horizontal Transfer Pumpsets -05 sets
IV. Control Panels for Duplex Horizontal Transfer Pumpsets-05 sets
V. Duplex Vertical Booster Pumpsets-05 sets
VI. Control Panels for Duplex Vertical Booster Pumpsets--05 sets
VII. Duplex Vertical booster pump with variable speed drive and control panel-
01 set
The detailed specification of each item is given as below:
I GRP Potable Water Storage Cistern (with partition)
It shall comprise not less than the following as shown in the diagrams (Refer to Drawing A, B and C):
o 2mL x 1mW x 1mH (Approved) with partition o Make: FRP or equivalent o C/w: - Level indicator with drain down, isolation and overflow valve,
marking and label. - Vent - Inlet valve - Outlet valve - Ball valve - Access cover and lock - Balancing pipe and isolation valve - Inlet manifold and valves - Outlet pipe manifold and valves - Ladders - Recess for mounting level sensors
o Seat on steel channel be with padding o Concrete plinths o Drain pipes and valves
o Overflow and warning pipes
6
Annexure-B (Pumping system)
II GRP Potable Water Storage Cistern (without partition)
It shall comprise not less than the following as shown in the diagrams(Refer to Drawing A, B and C):
o 2mL x 1mW x 1mH (Approved) o Make: FRP or equivalent o C/w: - Level indicator with drain down, isolation and overflow valve,
marking and label. - Vent - Inlet valve - Outlet valve - Ball valve - Access cover and lock - Inlet manifold and valves - Outlet pipe manifold and valves - Ladders - Recess for mounting level sensors
o Seat on steel channel be with padding o Concrete plinths o Drain pipes and valves
o Overflow and warning pipes
III Duplex Horizontal Transfer Pumpsets
Each duplex sets to comprise of 2 pumpsets which can alternate in duty with the following requirements:
o Head: 30 m (Min) o Flow: 4 m3/hr (Min) o Horizontal type o SS impeller and casing stage o Single or multistage centrifugal o Connected to single or three phase motor. o C/w:
- Gate valves - Strainers - Check valves - Flexible joints - Pressure and compound gauges - Pipes and fittings - Manifolds
o Plinths and pump bases c/w vibration absorbers
7
Annexure-B (Pumping system)
IV Control Panels for Duplex Horizontal Transfer Pumpsets
Each manual-auto operating panel shall comprise of
o Minimum 400H x 300W x 300D single layer PVC box with clear perspex cover.
o Main isolator mounted on side o Control fuses c/w holders o TPN MCB main breaker o TPN RCCB o TP MCBs o Magnetic contactors c/w overloads o Relays c/w bases o Transformer indicating lights c/w with bezel and lens for ‘Run’,
‘Stop’ and ‘Trip’
o Auto-Off-Manual selector switch. o ‘Pump 1’-‘Pump 2’ duty selector switch o Start push buttons o Stop push buttons o Labeling o Terminal blocks, mounting bracket, cable holders and DIN rail. o 5 level floatless controller (Simulate ‘High side cistern’ c/w sensing
electrodes and holders mounted on side of water storage cistern o 3 level floatless controller (Simulate ‘Low side cistern’ c/w sensing
electrodes and holders mounted on side of water storage cistern
V Duplex Vertical Booster Pumpsets
Each duplex sets to comprise of 2 pumpsets which can alternate in duty with the following requirements:
o Head: 30 m (Min) o Flow: 4 m3/hr (Min) o Vertical type. o SS impeller and casing stage o Multistage centrifugal o Connected to single or three phase motor. o C/w:
- Gate valves - Strainers - Check valves - Flexible joints - Pressure switches manifold c/w gauge - Pressure and compound gauges - Pipes and fittings - Manifolds Installed with single hydro-pneumatic pressure vessel which comes with (To size according to design. Small capacity pneumatic vessel preferred): - Air nipple - Rubber diapraghm
8
Annexure-B (Pumping system)
- Supports and brackets o Plinths and pump bases c/w vibration absorbers
VI Control Panels for Duplex Vertical Booster Pumpsets
Each manual-auto operating panel shall comprise of:
o Minimum 400H x 300W x 300D single layer PVC box with clear
perspex cover
o Main isolator mounted on side o Control fuses c/w holders o TPN MCB main breaker o TPN RCCB o TP MCBs o Magnetic contactors c/w overloads o Relays c/w bases o Transformer indicating lights c/w with bezel and lens for ‘Run’,
‘Stop’ and ‘Trip’
o Auto-Off-Manual selector switch o Start push buttons o Stop push buttons o Labeling o Terminal blocks, mounting bracket, cable holders and DIN
rail. 3 level floatless controller (Simulate ‘Low side cistern’ c/w sensing electrodes and holders mounted on side of water storage cistern
VII Duplex Vertical booster pump with variable speed drive and control panel
o Provide additional electronic flow switch and controls to the pumping system c/w variable speed drives for the motors
o Control Panel includes relays, wiring, contactors, DIN rails etc.
Others Information:
Floor loading for T02-20 is 10kN/m2. Supplier is to ensure that the overall loading is within this limit.
9
Annexure-B (Pumping system)
MANHOLE COVER WITH LOCK
INLET VALVE
CAT LADDER
Drawing A
VENT
EQUILIBRIUM FLOAT VALVE
DRAIN VALVE
OUTLET VALVE
BALANCING VALVE
WATER STORAGE CISTERN
2M X 1M X 1M SUPPORTED ON I BEAMS PLUS PAD
CONCRETE PLINTH
10
Annexure-B (Pumping system)
SDHC SDHC SDHC SDHC
SDHC SDHC SDHC SDHC SDHC SDHC SDHC SDHC
WO
B
WO
B
WO
B
WO
B
WD
W
D
WD
W
D
WD
W
D
WD
W
D
Drawing B