oh sts price sheet 2014 - ohio · price model *rise capacity number surface mounted, 2 stage...

Effective November 2014

OHIO/DASState Term Schedule

Price List2014

Lifts

Two-Post Lifts are offered with the choice of Shockwave EquippedTM , Dual Controls or Conventional Controls.

Shockwave Equipped 2-Post lifts include:• 2X faster rise/descent speed,• 110v DC power unit, built in battery charger,• Spotline™ laser with motion sensor to aid in centering vehicles in the bay,• Base plate covers and your choice of arm configurations,• (2) 24 Series batteries are REQUIRED but NOT INCLUDED.

Copyright © 2014 by Rotary Lift, a Vehicle Service Group LLC Brand. All Rights Reserved.All Drawings, Illustrations, Model Numbers And Descriptions Are All Copyrighted Materials. Unauthorized Use Is Prohibited.

EffectiveNovember 2014

Same as SPOA10 2-post lift only Shockwave Equipped. Standard with 2-stage arms, flip-up adapters and True Asymmetrical design for easy vehicleentry. Used on framed vehicles.

SPOA10-SW

Same as SPOA10-RA 2-post lift only Shockwave Equipped. Standard with3-stage FRONT arms and round adapters. Primarily used on unibodyvehicles. (To use with framed vehicles, also order FJ6197.)

Same as SPOA10-TA 2-post lift only Shockwave Equipped. Standard with3-stage FRONT arms and truck adapters. Primarily used on framedvehicles. Includes (4) 3 1/2" FJ6171-1 extensions and (4) 5" FJ6171-2extensions.

SPOA10-RASW

SPOA10-TASW

7,000 lbs.(3175 kg)

SPOA7-HYSW

$5,149.81

$5,355.78

$5,355.78

77"(1956 mm)

$5,574.62

Shockwave Equipped EXCLUSIVE! True Asymmetrical design. Standardwith unique Patent Pending front pad and 3-stage REAR arms formaximum productivity. Includes (4) FJ6197 and (4) 2" rubber pads.Primarily used on unibody vehicles.

10,000 lbs.(4536 kg)

81"(2064 mm)

Shockwave EquippedTM SmartLift**

81 1/2"(2045 mm)

10,000 lbs.(4536 kg)

Shockwave Equipped SmartLift. Equipped with TRIO™ superstructure andFLIP-UP adapters. Primarily used on framed vehicles.SL210-FASW

SL210-RASW $8,635.3375 7/8"

(1927 mm)10,000 lbs.(4536 kg)

$8,635.33

SL210-MP8SW8,000 lbs.(3629 kg) $8,635.33

Shockwave Equipped SmartLift with moveable pads and standard controls.Includes (4) 3" FJ2428, (4) 1 1/2" FJ2427 flat polymer adapters and theFJ2487 rubber pad kit.

73 3/8"(1864 mm)

Shockwave Equipped SmartLift. Standard with TRIO™ superstructure andRubber Adapters. Primarily used on unibody vehicles.

™

2

DESCRIPTION NET STSPRICE

*RISE CAPACITYMODEL

NUMBER

Bench ControlsBench controls feature included with the Shockwave EquippedTM Conventional / SmartLift models. Pricein addition to unit price.

$551.70

10,000 lbs.(4536 kg)

83"(2115 mm)

Same as SPO10 only Shockwave Equipped. Standard with 2-stage arms,flip-up adapters and True Symmetrical design. Used on framed vehicles.SPO10-SW

Same as SPO12 only Shockwave Equipped. Standard with 3-stageFRONT and REAR arms and truck adapters. Includes (4) 3 1/2" FJ6171-1extensions and (4) 5" FJ6171-2 extensions.

SPO12-SW12,000 lbs.(5443 kg)

84 1/4"(2140 mm)

12,000 lbs.(5443 kg)

Same as SL212 only Shockwave Equipped. Standard with Truck Adapters.SL212-SW

* NOTE: Lift Rise Is Measured From Floor To Top Of Either Pad, Runway, Or Adapter In The Highest Position. Except For SmartLift In Which Rise Indicates Plunger StrokeFrom Finished Floor.**NOTE: All SmartLifts and SmartLift Finish Kits Include 50’ of 1/4” Airline And Fittings To Be Used For Lock System.NOTE: Standard Colors Red And Blue. Gray And Black Are Available At No Additional Charge, But Are Considered Non-Standard And Subject To Lead Time RestrictionsAnd Order Cancellation Penalties. Other Non-Standard Colors Or Shade Variations Are Available For An Additional Charge, But Also Subject To Lead Time Restrictions AndCancellation Penalties. Consult Factory For Pricing.

$5,149.81

$7,256.69

$10,464.52

Shockwave Equipped SmartLifts include:• 2X faster rise/descent speed,• 110v DC power unit, bulit in battery charger,• Spotline™ laser with motion sensor and your choice of superstructures,• (2) 24 Series batteries are REQUIRED but NOT INCLUDED.

NEW!NEW!NEW!NEW!NEW!

Shockwave EquippedTM Two-Post Lift Options

10,000 lbs.(4536 kg)

83"(2115 mm)

SL210-TASW $8,635.3375 7/8"

(1927 mm)10,000 lbs.(4536 kg)

Shockwave Equipped SmartLift. Standard with TRIO™ superstructure andTruck Adapters. Primarily used on unibody vehicles.

NEW!NEW!NEW!NEW!NEW!

10,000 lbs.(4536 kg)

Same as SPO10 only Shockwave Equipped. Standard With Front and Rear3 Stage Arms with Round Adapter.

SPO10-RASW $5,637.76

10,000 lbs.(4536 kg)

Same as SPO10 only Shockwave Equipped. Standard With Front and Rear3 Stage Arms Truck Adapter. Comes with (4) FJ6171-1 Extensions 3 1/2”Tall and (4) FJ6171-2 Extensions 5” Tall.

SPO10-TASW $5,637.76


3

Lifts

* NOTE: Lift Rise Is Measured From Floor To Top Of Either Pad, Runway, Or Adapter In The Highest Position. Except For SmartLift In Which Rise Indicates Plunger StrokeFrom Finished Floor.**NOTE: All SmartLifts and SmartLift Finish Kits Include 50’ of 1/4” Airline And Fittings To Be Used For Lock System.NOTE: Standard Colors Red And Blue. Gray And Black Are Available At No Additional Charge, But Are Considered Non-Standard And Subject To Lead Time RestrictionsAnd Order Cancellation Penalties. Other Non-Standard Colors Or Shade Variations Are Available For An Additional Charge, But Also Subject To Lead Time Restrictions AndCancellation Penalties. Consult Factory For Pricing.

T100276 $2,886.00Equips existing SmartLifts with 8” plungers and arm style superstructures with Shockwave features.

Shockwave EquippedTM Retrofit Kits

T100277 $2,886.00

Spotright laser spotting retrofit kit.

Equips existing SmartLifts with 8” plungers and moveable pad style superstructures with Shockwavefeatures.

Column Base Plate Cover. Fits SPOA7-200 and above, SPOA9-200 and above, all SPOA10 serieslifts.

$30.04N539

$5,341.68Shockwave Inground Portion Only For Split SL Orders -- Both Conventional and LDS(Liquid Detection System) Versions.

10,000 or12,000 lbs.

(4536 or 5443 kg)T110555

Shockwave EquippedTM High Pressure Inground Assembly

81 1/2"(2045 mm)

10,000 lbs.(4536 kg)

Shockwave Equipped finish kit with TRIO superstructure and FLIP-UPADAPTERS.

SL210-FASWfinish

SL210-RASWfinish $3,357.40

76 7/8"(1953 mm)

10,000 lbs.(4536 kg)

$3,357.40

SL210-MP8SWfinish

8,000 lbs.(3629 kg) $3,357.40

Shockwave EquippedTM Finish Kits**

73 3/8"(1864 mm)

Shockwave Equipped finish kit with MOVABLE PAD superstructure. ForSmartLifts with 8 1/2" plungers. Includes (4) 1 1/2" FJ2427-1 spacer blocks,(4) 3" FJ2428 spacer blocks and mounting hardware. Also includes FJ2487rubber pad kit.

Shockwave Equipped finish kit with TRIO superstructure and RUBBERADAPTERS.

SL210-TASWfinish

76 7/8"(1953 mm)

10,000 lbs.(4536 kg)

Shockwave Equipped finish kit with TRIO superstructure and TRUCKADAPTERS. Includes (4) 3 1/2" T130660 extensions and (4) 5" T130661extensions.

$3,357.40

$372.09FA7814BK

Pull Out Arm for SPOA7-HYSW $687.79N9110

Bench Controls Bench controls feature included with the Shockwave EquippedTM Finish Kits models. Price in addition tounit price.

$551.70

T100281 $3,448.74Equips existing SmartLifts with 8” plungers and arm style superstructures with Shockwave benchcontrol features.

T100282 $3,448.74Equips existing SmartLifts with 8” plungers and moveable pad style superstructures with Shockwavebench control features.

DESCRIPTIONNET STS PRICE*RISE CAPACITYMODEL

NUMBER

Shockwave EquippedTM Accessories

T100275 $4,327.17SL210 and SL212 Shockwave Equipped completion kit. Contains 8 1/2" plungers, equalizers, guidebarrels, cylinders, hoses, lock components and hardware. To make a complete lift also requires afuture/relocation kit (T110177) and a finish kit. No power unit included.

Shockwave EquippedTM Completion Kit

Smartlift DC Control Pedestal Kit (No cost if ordered with lift). $121.37T110606

SL212-SWfinish

76 7/8"(1953 mm)

12,000 lbs.(5443 kg)

Shockwave Equipped finish kit with TRIO superstructure and TRUCKADAPTERS. Includes (4) 3 1/2" T130660 extensions and (4) 5" T130661extensions.

$5,186.59NEW!NEW!NEW!NEW!NEW!

Rotary Lift offers the option to split SL orders so that the high pressure inground assembly portion of the lift can be shipped ahead of the rest of the lift. To do this, you should orderone high pressure inground kit and one finish kit from the lists below. There is a $100 list price fee for this option. High pressure inground kits include everything needed to install theinground portion of the lift. Finish kits include the superstructure, power unit and parts box.

Effective November2014

DESCRIPTIONNET STS

PRICE*RISE CAPACITYMODELNUMBER

Surface Mounted, 2 stage flip-up arms, Frame Contact Lift. Electric-Hydraulic Operation. TrueAsymmetrical Design For Easy Vehicle Entry. Factory Rotated Columns Allow Doors OfVehicle To Be Fully Opened While Properly Positioned On Lift. Arm Restraints -- All Arms.

10,000 lbs.(4536 kg)

78"(1981 mm)SPOA10 $3,726.43

Surface Mounted, Movable Fixed Pad Drive Over Type With True Asymmetrical Design forEasy Vehicle Entry. Factory Rotated Columns Allow Doors of Vehicle to be Fully OpenedWhile Properly Positioned on Lift. Overhead Equalization System. Electric-HydraulicOperation. Inlcudes (4) FJ2428E Specer Blocks and Hinged Approach Ramps.

74"(1880 mm)

7,000 lbs.(3175 kg)

$5,389.50SPOA7-MP

SPOA10-RAwith 3-stage

RA arms$3,932.40

Same as SPOA10 with 3-stage FRONT arms and round adapters. 3-stage arms allow for an increase in overall arm sweepand minimum arm reach to precisely lift vehicles that are: • Primarily Uni-body construction; • Visually marked OEdesignated pick-up points on the vehicle; • Wider stance and lower profile; • Accommodates short and long wheelbasevehicles (for use with frame vehicles, also order FJ6197).

Three-stage telescoping arms for accommodating smaller vehicles without excessive maneuvering of vehicle (for modelsSPOA9 and SPOA7 200-400 Series). Kits include four arms.

$1,039.65N2244YL

SPOA10-TAwith 3-stage

TA arms

Same as SPOA10 with 3-stage FRONT arms and truck adapters. Primarily for use with frame vehicles. (For RA adaptersalso order FJ6225). Comes with (4) FJ6171-1 Extensions 3 1/2” Tall and (4) FJ6171-2 Extensions 5” Tall.

$3,932.40

Conventional / Two-Post / Asymmetric

Three-Stage Arm/Movable Pad Retrofit Kits

Two-Post Lifts are offered with the choice of Conventional, Dual Controls or Shockwave EquippedTM. Dual Controls allow for easier and more efficient lift operation, and is designed to maximize technicianproductivity.

Conventional: Includes standard two hand operation and mechanical release.Dual Control: Allows operation from either column, includes integrated air and 110v GFI electrical connections; OSHA compliant lockable disconnect switch, patented tool hanger operation.

Two-Post Lift Options

* NOTE: Lift Rise Is Measured From Floor To Top Of Either Pad, Runway, Or Adapter In The Highest Position. Except For SmartLift In Which Rise Indicates Plunger Stroke From Finished Floor.**NOTE: All SmartLifts Include 50’ of 1/4” Airline And Fittings To Be Used For Lock System.NOTE: Standard Colors Red And Blue. Gray, Yellow And Black Are Available At No Additional Charge, But Are Considered Non-Standard And Subject To Lead Time Restrictions And OrderCancellation Penalties. Other Non-Standard Colors Or Shade Variations Are Available For An Additional Charge, But Also Subject To Lead Time Restrictions And Cancellation Penalties.Consult Factory For Pricing.

NOTE: Dual Control Lifts Require A 110v Drop For The GFCI Outlet (the control is now 220VAC), Except For SmartLift.


4

Surface Mounted Lifts

FJ6115BK $243.97EH (Extended Height) Auxiliary Adapters For Use When Raising Certain Vans Or Pick-Ups. Maximum Height 14 3/8" (365 mm).Capacity 2,500 lbs. (1,134 kg) Maximum Per Adapter. Fits Any Surface Mount Or Inground, Frame-Engaging, Rotary Lift ManufacturedSince October 1973. Includes (4) FJ696 Adapters and 2 Piece Column or Wall-Mounted Adapter Rack FJ6114.

FJ6133BK $259.30EH (Extended Height) Required To Lift 1988 Or Newer General Motors GMT400 Pickup Trucks. Maximum Height: 14" (356 mm)Capacity 2,500 lbs. (1,134 kg) Maximum Per Adapter. Fits Any Surface Mount Or Inground, Frame-Engaging, Rotary Lift ManufacturedSince October 1973. Includes (4) FJ6101 Adapters and 2 Piece Column or Wall-Mounted Adapter Rack FJ6114.

Common Two-Post Lift Accessories**

FJ6195YL $163.06

FJ6197 $249.49Set of four (4) FJ6214 rubber adapters. Required for use on 3-stage arms when lifting trucks or other frame vehicles. Series:SPO12-700 and up; SL Series 800 and below (not for TRIO arms).

Extended height auxiliary adapters’ version of FJ6115. 3” (76 mm) additional rise for a total 17 3/8” (454 mm). Includes a setof (2) FJ6196 adapters. Capacity is 2,500 lbs. (1,134 kg) per adapter.

Adapter Extension Kit for RA/TA SPO/A10, SPO12RA/TA 3-stage, SL210 3-stage (800 series & below) and SL212 Lift Models (nottrio arms). Provides additional lifting height when vehicles require additional clearance or use on front or rear to level vehicle on lift.Includes four (4) FJ6171-1 (3.5" tall extension), four (4) FJ6171-2 (5" tall extension) and FJ6127 rack kit with mounting hardware.

FJ7880BK

FJ6225 Set of four (4) FJ6202 round adapters and 2 piece column wall-mounted adapter rack. For use on 3-stage arms when liftingUni-body construction vehicles. $249.49

NOTE: All Accessories Shown Above May Be Used With Most Frame Contact Models. See pages 13-16 for all accessories.Use Of Adapters Does Not Change Lift Capacity. Fits any Surface Mounted or Inground, Frame-Engaging Rotary Lift, Manufactured Since October 1973.

**

FJ6212KITYL $218.23Shorter version of FJ6115. Kit includes a set of (4) FJ6212 adapters and 2 piece column or wall mountedadapter rack FJ6114. Adapter height 7 3/8”. Capacity 2,500 lbs. (1,134 kg)

FJ6227 Movable pad retro kit for model SPOA10-500 series and above. Reduces lift capacity to 7,000 lbs. $2,700.88

$188.80



NOTE: Standard Colors Red And Blue. Gray, Yellow And Black Are Available At No Additional Charge, But Are Considered Non-Standard And Subject To Lead Time Restrictions AndOrder Cancellation Penalties. Other Non-Standard Colors Or Shade Variations Are Available For An Additional Charge, But Also Subject To Lead Time Restrictions AndCancellation Penalties. Consult Factory For Additional Pricing.

NOTE: Dual Control Lifts Require A 110v Drop For The GFCI Outlet, Except For SmartLift.

10,000 lbs.(4536 kg)

78"(1981 mm)

Surface Mounted 2 stage flip-up arms, Frame-Contact Lift. Overhead Equalization System.Electric-Hydraulic Operation. Arm Restraints -- All Arms.SPO10 $3,726.43

Surface Mounted, Frame Contact Lift. Clear Floor, Arm Restraints -- All Arms, Electric-Hydraulic Operation.With Overhead Adjustments of 15 ft., 15 ft. 6 in., 16 ft. and 16 ft. 6 in. Includes Air Operated Single PointRelease Locking Latches. Comes with Stack Adapters. $11,023.58SPO15

$11,023.58Same As Above — With Overhead Adjustments of 13 ft. 6 in. and 14 ft. 6 in.SPO15-LC

12,000 lbs.(5443 kg)

78"(1981 mm)

15,000 lbs.(6804 kg)

89 1/2"(2273 mm)

$1,902.14FJ5115

Surface Mounted, Frame Contact Lift. Overhead Equalization System, Arm Restraints -- All Arms,Electric-Hydraulic Operation. With Overhead Adjustments of 15 ft., 15 ft. 6 in., 16 ft. and 16 ft. 6in. Includes Air Operated Single Point Release Locking Latches.

$15,176.65SPO18

$15,176.65Same As Above — With Overhead Adjustments of 13 ft. 6 in. and 14 ft. 6 in.SPO18-LC

DESCRIPTIONNET STS

PRICE*RISE CAPACITYMODEL

NUMBER

* NOTE: Lift Rise Is Measured From Floor To Top Of Either Pad, Runway, Or Adapter In The Highest Position.

Additional 3” rise available for SPO10 and S10i models. Specify 81”-RISE when ordering. $155.7081”-RISE

Additional 3” rise available for SPO12 and S12i models. Specify 84”-RISE when ordering. $155.7084”-RISE

For 10,000 lb. models: Includes 3” additional rise standard and provides 1 ft, extended height (models SPO10, SPOA10, A10i and S10i). $303.44EH1

For 10,000 lb. models: Includes 3” additional rise standard and provides 2 ft, extended height (models SPO10, SPOA10, A10i and S10i). $490.40EH2

5

89 -1/2"(2273 mm)

18,000 lbs.(8165 kg)

$6,114.68Surface Mounted, Frame Contact Lift For Low Ceiling Application. Overhead Equalization System, ArmRestraints -- All Arms, Electric-Hydraulic Operation. Comes with Truck Adapter and (4) FJ6171-1Extensions 3 1/2” Tall and (4) FJ6171-2 Extensions 5” Tall.Total Height 11’8” (2’ Lower Than Standard).

SPO12-TALC

SPO12-TASurface Mounted, Frame Contact Lift With Front and Rear 3 Stage Arms with Truck Adapter and(4) FJ6171-1 Extensions 3 1/2” Tall and (4) FJ6171-2 Extensions 5” Tall.

SPO10-RA Same As SPO10 With Front and Rear 3 Stage Arms with Round Adapter. $4,214.38

$5,833.31

Conventional / Two-Post / Symmetric

Technician Productivity Options

Aircraft Tug Adapters. Converts An SPO15 Lift From A Vehicle Lift Into A 14,000 lbs. Aircraft Tug Lift. Kit Contains Two CrossBeams And Adapters.

81-1/16"(2059 mm)


SPO10-TASame As SPO10 With Front and Rear 3 Stage Arms Truck Adapter. Comes with (4) FJ6171-1Extensions 3 1/2” Tall and (4) FJ6171-2 Extensions 5” Tall. $4,214.38

SPO12-HMRSame as SPO12-TA only wider to accommodate Hummer vehicles. Width overall = 12’ 10-5/8” and heightoverall - 13’ 11-1/2”. $6,320.03

SPO12-HMR-EH1

Same as SPO12-HMR with height overall - 14’ 11-1/2”. $6,630.2184-1/16"(2136 mm)


Conventional/Two Post/Turf MaintenanceMODEL

NUMBER DESCRIPTION *RISE CAPACITYNET STS

PRICE

TLO7

TLO7EH2

TLO7-EH4

N257KITYL

N2206YL

FJ5123YL

FJ5204YL

68"(1727 mm)

7,000 lbs.(3175 kg)71"

(1803 mm)

$5,681.28

$6,171.68

$6,544.39

2-Post Surface Mounted Lift Electric-Hydraulic Operation. Can Accommodate 3 or 4Wheel Vehicles.

Same As TL07 Above -- Provides 2' extra height and 3” additional rise.

Same As TL07 Above -- Provides 4' extra height and 3” additional rise.

Arm Kit

Rail Bolster Kit

FA Arm Kit To Convert TL07-200/400 Series To A Lift For Passenger Cars and Light Trucks. $1,042.71

FA Arm Kit To Convert TL07-500 Series To A Lift For Passenger Cars and Light Trucks. $1,042.71

Rail Bolster Kit for SPO9-200/400 Series. Derates Lift to 7,000 lbs. capacity (3175kg).

Rail Bolster Kit for SPO10-500 Series and Above. Derates Lift to 7,000 lbs. capacity (3175 kg).

$3,007.38

$3,007.38

6

DESCRIPTIONMODEL

NUMBERNET STS

PRICECAPACITY*RISE

MAXIMUMWHEELBASE

RANGE

SM1868"

(1727 mm)18,000 lbs.(8165 kg)

$7,538.67

$8,259.56

Heavy Duty Surface Mounted Runway-Type Drive-On Lift. Runwaysand Ramps Have An Oil Resistant, Non-Skid Coating. Includes AirOperated Single Point Release Locking Latches, Filter LubricatorRegulator. Electric-Hydraulic Operation.

194"(4928 mm)

SM30Series

Overall Length 25’-81/8”.SM30-S $14,076.93

Overall Length 28’-81/8”.SM30-L $15,358.72

Overall Length 31’-81/8”.SM30-EL3 $16,638.66

307"(7798 mm)

235"(5969 mm)

271"(6883 mm)

68"(1727 mm)

30,000 lbs.(13,608 kg)

$1,174.51S100018 3 ft. runway extension for SM300 - 200/300 and SM30 Series.

$1,588.90FA641-18 3 ft. runway extension for SM300 - 100.

SM18-EL2

*NOTE: Lift rise is measured from floor to top of either pad, runway, or adapter in the highest position.

RFL25

Heavy Duty Surface Mounted Runway-Type Drive-On Lift, With 24" WideRunway That Can Be Set For Variable Tread Width Setting. Runways andRamps Have An Oil Resistant, Non-Skid Coating. Includes Air OperatedSingle Point Release Locking Latches. Internal Air Line with QuickDisconnects. Electric-Hydraulic Operation. For Raising Forklifts.

$18,716.1268"

(1727 mm)25,000 lbs.(11,340 kg)

163"(4140 mm)

Heavy Duty Surface Mounted Runway-Type Drive-On Lift, With 24" Wide Runway That Can Be Set For Variable Tread Width Setting. Runways and Ramps Have An OilResistant, Non-Skid Coating. Includes Air Operated Single Point Release Locking Latches. Internal Air Line with Quick Disconnects, Electric-Hydraulic Operation.

Conventional Four-Post

Four-Post Lifts



230"(5842 mm)

Drive-On Space Saver Alignment Rack

MODELNUMBER

DESCRIPTION CAPACITY*RISEMAXIMUM

WHEELBASERANGE

NET STSPRICE

YA12

YA12-EL1

Alignment Lift - Exclusive Yspace provides techs additional room to work fasterand easier compared to traditional scissor lifts, patented design allows for true up/down movement minimizing bay space required. Adjustable radius gaugepockets (radius gauges not included) and oversized slip plates toaccommodate 4 wheel alignments on wheelbase ranges from 71 1/2" to 158".Ramp chocks include rollers for smooth operation and ramps have non-skidcoating. Includes (2) RJ6000 rolling jacks, portable work step, internal airline,Filter/Regulator/Lubricator and Z100005 Turnplate filler kit for 14" x 14" x 1-1/2"radius gauges. NOT AVAILABLE IN 3 PHASE.

68"(1727 mm)

12,000 lbs.(5443 kg)

179-1/2"(4559 mm)

$20,613.35

Same as above with longer wheelbase. 68"(1727 mm)

12,000 lbs.(5443 kg)

189-1/2"(4813 mm) $20,613.35

Drive-On Space Saver General Service Lift

Y12

Y12-EL1

Flat Top General Service Lift - Exclusive Yspace provides techsadditional room to work faster and easier compared to traditionalscissor lifts, patented design allows for true up/down movementminimizing bay space required. Ramp chocks include rollers for forsmooth operation and ramps have non-skid coating. NOTAVAILABLE IN 3 PHASE.

Same as above with longer wheelbase.

68"(1727mm)

68"(1727mm)

12,00lbs.(5443 kg)

12,000 lbs.(5443 kg)

179-1/2"(4559 mm)

189-1/2"(4813 mm)

$13,699.32

$13,699.32

Heavy Duty 4-Post Alignment

AR18

AR18-EL

Heavy DutySurface Mounted Alignment Drive-On Lift/Includes (2) 9,000lb. Capacity Rolling Jacks, StainlessSteel Radius Gauges, Internal Airline Kit, Filter/RegualtorLubricator, Slip Plates and Necessary Mounting Hardware.230V Single Phase.

68"(1727 mm)

18,000lbs(8165 kg)

194”(4928 mm)

230”(5842 mm)

$17,160.94

$18,445.78

NET STSPRICE

81 1/2"(2045 mm)

10,000 lbs.(4536 kg)

CAPACITY**RISEDESCRIPTION

Conventional SmartLift with New TrioTM Superstructure and FLIP UP ADAPTERS. TwoPlunger, Side by Side, Fully Contained, Electric-Hydraulic Operation. Rigid Equalized. 8 1/2”Plunger Diameter. Drive Thru. Includes Air Actuated, Multi-Position Locks, 208-230 Volt,Single Phase Power Unit.

SmartLifts

MODELNUMBER*

SL210-FA

SmartLifts are offered with Conventional Controls or with One Touch Controls and include the LDS (Liquid Detection System).

$9,323.1284 1/4"

(2140 mm)12,000 lbs.(5443 kg)

Conventional SmartLift with Two Plunger, Side by Side, Fully Contained, Electric-HydraulicOperation. Rigid Equalized. 8 1/2” Plunger Diameter. Drive Thru. Includes Air Actuated, Multi-Position Locks, 208-230 Volt, Single Phase Power Unit. Comes with Truck Adapters and (4)T130660 3 1/2” tall and (4) T130661 5” tall extensions.

SL212

$11,102.04Combines SL212 with DOR10 Runways (182” wheelbase) Which Include: 2 Runways, 2 Auto RampChocks and Yoke Bolts. Runways and Ramps have an Oil Resistant, Non-Skid Coating.

SL212-DOR10,000 lbs.(4536 kg)

$5,940.58Two Plunger, Side by Side, Fully Contained, Electric-Hydraulic Operation. Includes: GuidePistons, Automatic Locking Devices, Rigid-Equalized, 208-230 Volt, Single Phase Power Unit.Also for use with Drive-On Runways. System Capacity Will Vary When In Use With Non-Rotary Components.

10,000 lbs.(4536 kg)71 1/2"

(1816 mm)

SL210-BU

$6,855.7912,000 lbs.(5443 kg)SL212-BU

$7,775.9181 1/8"

(2061 mm)SL210i-FA

$9,638.8184 1/4"

(2140 mm)12,000 lbs.(5443 kg)

Two Plunger, Side by Side, Fully Contained, Electric-Hydraulic Operation. RigidEqualized. 8 1/2” Plunger Diameter. Drive Thru. Includes Air Actuated, Multi-Position Locks, 208-230 Volt, Single Phase Power Unit. Comes with TruckAdapters and (4) T130660 3 1/2” tall and (4) T130661 5” tall extensions.

SL212i

$11,597.96SL212-DORi

10,000 lbs.(4536 kg)

$6,136.13Two Plunger, Side by Side, Fully Contained, Electric-Hydraulic Operation. Includes:Guide Pistons, Automatic Locking Devices, Rigid-Equalized, 208-230 Volt, SinglePhase Power Unit. Also for use with Drive-On Runways.System Capacity Will Vary When In Use With Non-Rotary Components.

10,000 lbs.(4536 kg)71 1/2"

(1816 mm)

SL210-BUi

$7,171.4912,000 lbs.(5443 kg)

SL212-BUi

Lift comes standard with operating controls located on wall-mount unit. The following options are available. Must Specify When Ordering.ControlMountingOptions

NOTE: SmartLifts do not require a 110v drop for the control panel.

**NOTE: Lift Rise Is Measured From Floor To Top Of Either Pad, Runway, Or Adapter In The Highest Position, Except For SmartLift In Which Rise Indicates Plunger Stroke From Finished Floor.

8

SL210-RA $7,466.34

SL210i-RA $7,775.91

76 7/8"(1953 mm)

10,000 lbs.(4536 kg)

SmartLift with Liquid Detection

76 7/8"(1953 mm)

10,000 lbs.(4536 kg)

$7,466.34

Conventional / SmartLift

10,000 lbs.(4536 kg)

Power Unit Stand For Use With Conventional and Single Phase One Touch Controls for Mounting One or Two Power Units. No cost when ordering lift.T110280

SL210-MP88,000 lbs.(3629 kg)

$7,466.34

SL210i-MP8 $7,775.918,000 lbs.(3629 kg)

*NOTE: All SmartLifts Include 50’ of 1/4” Airline And Fittings To Be Used For Lock System.

8,000 lb. capacity SmartLift w/moveable pads, std controls. Includes 4 FJ2428 (3”) and 4FJ2427 (1.5”) flat polymer adapters. Effective 7/1/2011 also includes FJ2487 rubber pad kit.

8,000 lb. capacity SmartLift w/moveable pads, one touch controls and LDS. Includes 4 FJ2428 (3”) and4 FJ2427 (1.5”) flat polymer adapters. Effective 7/1/2011 also includes FJ2487 rubber pad kit.

73 3/8"(1864 mm)

73 3/8"(1864 mm)

Power Unit Stand For Use With Three Phase One Touch Controls for Mounting One Power Unit and Control Unit. No cost when ordering lift.T110165


Conventional SmartLift with New TrioTM Superstructure and RUBBER ADAPTERS. TwoPlunger, Side by Side, Fully Contained, Electric-Hydraulic Operation. Rigid Equalized. 8 1/2”Plunger Diameter. Drive Thru. Includes Air Actuated, Multi-Position Locks, 208-230 Volt, SinglePhase Power Unit.

SmartLift with New TrioTM Superstructure and FLIP UP ADAPTERS. Two Plunger,Side by Side, Fully Contained, Electric-Hydraulic Operation. LDS - Liquid DetectionSystem. Rigid Equalized. 8 1/2” Plunger Diameter. Drive Thru. Includes Air Actuated,Multi-Position Locks, 208-230 Volt, Single Phase Power Unit.

SmartLift with New TrioTM Superstructure and RUBBER ADAPTERS. Two Plunger,Side by Side, Fully Contained, Electric-Hydraulic Operation. LDS - Liquid DetectionSystem. Rigid Equalized. 8 1/2” Plunger Diameter. Drive Thru. Includes Air Actuated,Multi-Position Locks, 208-230 Volt, Single Phase Power Unit.

Combines SL212i with DOR10 Runways (182” wheelbase) Which Includes: 2 Runways, 2Auto Ramp Chocks and Yoke Bolts. Runways and Ramps have an Oil Resistant, Non-Skid Coating.

SL210-TA

Conventional SmartLift with New TrioTM Superstructure and TRUCK ADAPTERS. Two Plunger,Side by Side, Fully Contained, Electric-Hydraulic Operation. Rigid Equalized. 8 1/2” PlungerDiameter. Drive Thru. Includes Air Actuated, Multi-Position Locks, 208-230 Volt, Single PhasePower Unit. Comes with (4) T130660 3 1/2” tall and (4) T130661 5” tall extensions.

76 7/8"(1953 mm)

10,000 lbs.(4536 kg)

SL210i-TA76 7/8"

(1953 mm)10,000 lbs.(4536 kg)

SmartLift with New TrioTM Superstructure and TRUCK ADAPTERS. Two Plunger, Side by Side,Fully Contained, Electric-Hydraulic Operation. LDS - Liquid Detection System. Rigid Equalized. 8 1/2” Plunger Diameter. Drive Thru. Includes Air Actuated, Multi-Position Locks, 208-230 Volt, SinglePhase Power Unit. Comes with (4) T130660 3 1/2” tall and (4) T130661 5” tall extensions.

SmartLift Trio Adapter KitsNET STS PRICE

DESCRIPTION(-1,000 Series and Above)

MODELNUMBER

T100272 Rubber adapter kit for the NEW Trio Superstructure. Includes four (4) FJ6219 adapters.

T100273 Truck adapter kit for the NEW Trio Superstructure. Includes four (4) T110564 adapters.

T100274 Flip up adapter kit for the NEW Trio Superstructure. Includes components for four (4) arms.

T100271Adapter Extension Kit for SL210 with NEW TRIO Superstructure. Provides additional lifting height whenvehicles require additional clearance or use on front or rear to level vehicle on lift. Includes four (4) T130660 (3.5"tall extension) and four (4) T130661 (5" tall extension).

$7,466.34

$7,775.91

$192.48

$254.40

$254.40

$254.40


9

$5,168.20

NET STSPRICE

Inground Portion Only For Split SL Orders -- Both Conventional and LDS (LiquidDetection System) Versions.

10,000 or 12,000 lbs.(4536 or 5443 kg)

81 1/2"(2045 mm)

10,000 lbs.(4536 kg)

CAPACITY*RISEDESCRIPTION

Finish kit to complete Conventional SmartLift base unit with New Trio TM Superstructure and FLIP UPADAPTERS. Two Plunger, Side by Side, Fully Contained, Electric-Hydraulic Operation. RigidEqualized. 8 1/2” Plunger Diameter. Drive Thru. Includes Air Actuated, Multi-Position Locks, 208-230Volt, Single Phase Power Unit.

SmartLifts forSplit Shipments

MODELNUMBER

SL210-FAfinish

Rotary Lift offers the option to split SL orders so that the high pressure inground assembly portion of the lift can be shipped ahead of the rest of the lift. To do this, you should orderone high pressure inground kit and one finish kit from the lists below. There is a $100 list price fee for this option. High pressure inground kits include everything needed to install theinground portion of the lift. Finish kits include the superstructure, power unit and parts box.

$4,218.6784 1/4"

(2140 mm)12,000 lbs.(5443 kg)

Conventional SmartLift with Two Plunger, Side by Side, Fully Contained, Electric-Hydraulic Operation.Rigid Equalized. 8 1/2” Plunger Diameter. Drive Thru. Includes Air Actuated, Multi-Position Locks, 208-230 Volt, Single Phase Power Unit. Stack Adapters.

SL212finish

$5,996.98Combines SL212 with DOR10 Runways (182” wheelbase) Which Include: 2 Runways, 2 Auto RampChocks and Yoke Bolts. Runways and Ramps have an Oil Resistant, Non-Skid Coating.

SL212-DORfinish

10,000 lbs.(4536 kg)

$836.13Two Plunger, Side by Side, Fully Contained, Electric-Hydraulic Operation. Includes:Guide Pistons, Automatic Locking Devices, Rigid-Equalized, 208-230 Volt, SinglePhase Power Unit. Also for use with Drive-On Runways.System Capacity Will Vary When In Use With Non-Rotary Components.

10,000 lbs.(4536 kg)71 1/2"

(1816 mm)

SL210-BUfinish

$1,751.3412,000 lbs.(5443 kg)

SL212-BUfinish

$2,670.8481 1/8"

(2061 mm)SL210i-FA

finish

$4,534.3684 1/4"

(2140 mm)12,000 lbs.(5443 kg)

Two Plunger, Side by Side, Fully Contained, Electric-Hydraulic Operation. Rigid Equalized. 8 1/2”Plunger Diameter. Drive Thru. Includes Air Actuated, Multi-Position Locks, 208-230 Volt, Single PhasePower Unit. Stack Adapters.

SL212ifinish

$6,493.51Combines SL212i with DOR10 Runways (182” wheelbase) Which Includes: 2 Runways, 2 Auto Ramp Chocks and YokeBolts. Runways and Ramps have an Oil Resistant, Non-Skid Coating.

SL212-DORifinish

10,000 lbs.(4536 kg)

$1,031.07Two Plunger, Side by Side, Fully Contained, Electric-Hydraulic Operation. Includes:Guide Pistons, Automatic Locking Devices, Rigid-Equalized, 208-230 Volt, SinglePhase Power Unit. Also for use with Drive-On Runways.System Capacity Will Vary When In Use With Non-Rotary Components.

10,000 lbs.(4536 kg)71 1/2"

(1816 mm)

SL210-BUifinish

$2,067.0412,000 lbs.(5443 kg)

SL212-BUifinish

ControlMountingOptions

SL210-RAfinish

$2,361.89

SL210i-RAfinish

$2,670.84

76 7/8"(1953 mm)

10,000 lbs.(4536 kg)

76 7/8"(1953 mm)

10,000 lbs.(4536 kg)

$2,361.89

10,000 lbs.(4536 kg)

SL210-MP8finish

8,000 lbs.(3629 kg) $2,361.89

T110425

High Pressure Inground Assembly

Finish Kits**

*NOTE: Lift Rise Is Measured From Floor To Top Of Either Pad, Runway, Or Adapter In The Highest Position, Except For SmartLift In Which Rise Indicates Plunger Stroke From Finished Floor.

**NOTE: All SmartLifts Finish Kits Include 50’ of 1/4” Airline And Fittings To Be Used For Lock System.

73 3/8"(1864 mm)

Moveable-pad superstructure for SmartLifts with 8-1/2" piston diameter. Includes (4)FJ2427 1-1/2" spacer blocks, (4) FJ2428 3" spacer blocks, mounting hardware.Effective 7/1/2011 also includes FJ2487 rubber pad kit.

Lift comes standard with operating controls located on wall-mount unit. The following options are available. Must Specify When Ordering.

Power Unit Stand For Use With Conventional and Single Phase One Touch Controls for Mounting One or Two Power Units. No cost when orderinglift.

T110280

Power Unit Stand For Use With Three Phase One Touch Controls for Mounting One Power Unit and Control Unit. No cost when ordering lift.T110165


Finish kit to complete Conventional SmartLift base unit with New Trio TM Superstructure and RUBBERADAPTERS. Two Plunger, Side by Side, Fully Contained, Electric-Hydraulic Operation. RigidEqualized. 8 1/2” Plunger Diameter. Drive Thru. Includes Air Actuated, Multi-Position Locks, 208-230Volt, Single Phase Power Unit.

Finish kit to complete SmartLift base unit with New Trio TM Superstructure and FLIP UP ADAPTERS.Two Plunger, Side by Side, Fully Contained, Electric-Hydraulic Operation. LDS - Liquid DetectionSystem. Rigid Equalized. 8 1/2” Plunger Diameter. Drive Thru. Includes Air Actuated, Multi-PositionLocks, 208-230 Volt, Single Phase Power Unit.

Finish kit to complete SmartLift base unit with New Trio TM Superstructure and RUBBER ADAPTERS.Two Plunger, Side by Side, Fully Contained, Electric-Hydraulic Operation. LDS - Liquid DetectionSystem. Rigid Equalized. 8 1/2” Plunger Diameter. Drive Thru. Includes Air Actuated, Multi-PositionLocks, 208-230 Volt, Single Phase Power Unit.

SL210-TAfinish

76 7/8"(1953 mm)

10,000 lbs.(4536 kg)

Finish kit to complete Conventional SmartLift base unit with New Trio TM Superstructure and TRUCKADAPTERS. Two Plunger, Side by Side, Fully Contained, Electric-Hydraulic Operation. Rigid Equalized. 81/2” Plunger Diameter. Drive Thru. Includes Air Actuated, Multi-Position Locks, 208-230 Volt, Single PhasePower Unit. Comes with (4) T130660 3 1/2” tall and (4) T130661 5” tall extensions.

SL210i-TAfinish

76 7/8"(1953 mm)

10,000 lbs.(4536 kg)

Finish kit to complete SmartLift base unit with New Trio TM Superstructure and TRUCK ADAPTERS. TwoPlunger, Side by Side, Fully Contained, Electric-Hydraulic Operation. LDS - Liquid Detection System. RigidEqualized. 8 1/2” Plunger Diameter. Drive Thru. Includes Air Actuated, Multi-Position Locks, 208-230 Volt,Single Phase Power Unit. Comes with (4) T130660 3 1/2” tall and (4) T130661 5” tall extensions.

SmartLift Superstructure KitsNET STS

PRICEDESCRIPTIONMODEL

NUMBER

T100249Moveable-pad superstructure for Smartlifts with 8 1/2" piston diameter. Includes (4) FJ2427 1.5" spacer blocks, (4) FJ2428 3"spacer blocks, spotting dish, relief valve and mounting hardware.

T100270NEW Trio flip-up superstructure kit for 8" plungers (SL210-400 series and above). Includes adapters, spotting dish, arm pins andmounting hardware.

T100268NEW Trio round adapter superstructure kit for 8" plungers (SL210-400 series and above). Includes adapters, spotting dish, armpins and mounting hardware.

T100269NEW Trio truck adapter superstructure kit for 8" plungers (SL210-400 series and above). Includes adapters, spotting dish, armpins and mounting hardware.

T100210 3-stage superstructure kit for 6" plungers (SL29-300 series and above). Includes adapters, spotting dish, arm pins and mountinghardware.

$1,742.15

$1,710.27

$1,742.15

$1,742.15

$1,742.15

$2,361.89

$2,670.84

SL210i-MP8finish

8,000 lbs.(3629 kg) $2,670.84

73 3/8"(1864 mm)

Moveable-pad superstructure for SmartLifts with 8-1/2" piston diameter. Includes (4) FJ2427 1-1/2" spacer blocks, (4)FJ2428 3" spacer blocks, mounting hardware. Two Plunger, Side by Side, Fully Contained, Electric-Hydraulic Operation.LDS - Liquid Detection System. Rigid Equalized. 8 1/2” Plunger Diameter. Drive Thru. Includes Air Actuated, Multi-Position Locks, 208-230 Volt, Single Phase Power Unit. Effective 7/1/2011 also includes FJ2487 rubber pad kit.


10

Kit Consisting of :• (1) Containment Box• (1) Inner Frame Assembly• (1) Seal Kit for Containment Box

• (1) Frame Concrete Anchoring Kit• (1) Full Length Cover Plate• (1) Flexible Entry Boot• Necessary Hardware

SL210, SL210i, SL212 and SL212i completion kit. Contains 8 1/2” plungers, equalizers, guidebarrels, cylinders, hoses, lock components, and hardware. To make a complete lift this kit alsorequires a future/relocation kit and a finish/kit. No power unit included.

NET STSPRICEDESCRIPTION

New Future Kit for500-Series and Later

SL212 and SL210

T110177

T100239

T100011 Hose Kit

$2,662.87

$3,108.52

MODELNUMBER

Pre-cut hose kit including 25' hydraulic hose, air regulator. $180.22

SmartLift Kits

SmartLiftCompletion/Future/Conversion Kits

$486.72T100183

Liquid Removal System (LRS) designed to evacuate fluids from the containment tubes of theRotary Lift SmartLift® Models as well as competitor models. When connected to an air supplythat is regulated to 90psi, it will draw approximately 1 gallon of water every 90 seconds or 1gallon of hydraulic fluid every 16 minutes.

LRS unit includes a 16 gallon drum, vacuum pump, dolly and suction line.

$4,153.69T100094 Completion Kit for 6” plunger for T110126 Relocation Kit. Does not include superstructure.

$297.92T110270Gasket and cover kit for 400 SL Models. No charge when ordering with completion kit. Requiredonly when replacing guts or installing completion kit on SL29-400 or SL212-300/400.

T140072 $11.03

T100035 For 6” plunger completion kits. Includes 2 Yokes, 4 Swinging Arms, 4 Swivel Three-Position FrameContact Adapters, Wheel Dish and Yoke Bolts.

$1,194.74

MODELNUMBER

NET STSPRICE

SYSTEMCAPACITYDESCRIPTION

10,000 lbs.(4536kg) $3,945.88

Drive-On RunwaysMaximum

WheelbaseRange

182"(4623 mm)

System Capacities Based On Use With Applicable Rotary Lift. For Use With Lifts Manufactured By Others, Capacity May Vary. Consult Factory For More Information.

DOR10-S

Drive-On Runways

Convert any DOR to a 4-wheel alignment rack by adding an alignment kit (FA5501-1) option shown on page 14.

2 Runways, 2 Auto Ramp Chocks And Yoke Bolts. Runways and RampsHave An Oil Resistant, Non-Skid Coating. For SL212BU/BUi -- NoCutouts Available. Accommodates Current Standard RJ6000 RollingBridge (Not Included).DOR10-L

DOR7-S

DOR7-L

2 Runways, 2 Auto Ramp Chocks And Yoke Bolts. Runways and RampsHave An Oil Resistant, Non-Skid Coating. For SL210BU/BUi -- NoCutouts Available. Accommodates Current Standard RJ6000 RollingBridge (Not Included).

182"(4623 mm)

158"(4013 mm)7,000 lbs.

(3175kg)$3,945.88

Package Includes Two (2) RJ6000 Rolling Bridges, FA5501-1 Bolt-On Alignment Package, (which includes: FourWheel Alignment Retro Kit in Roll Back Version -- ideal for 3-D Alignment Equipment -- Stainless Steel RadiusGauge, Rear Slip Plate Kit), Four Leveling Legs, and necessary hardware (drilling and tapping required).

Drive-On Runway Efficiency / Alignment Package

DESCRIPTIONMODEL

NUMBER

$6,908.51

158"(4013 mm)

S100016

Same as above but includes two (2) SJ6000 Swing Air Jacks in place of RJ6000.S100023 $7,457.15

Mobil 1 SHC1500 (12.5 oz. cartridge) is a versatile multi-purpose extreme pressure, antiwear grease.IMPORTANT: Only Rotary Approved Grease should be used on SL Products. Other greaseproducts may affect the performance of the product.


$948.31T100236LDS (Liquid Detection System) Conversion Kit for SL210, SL212 and SL29. Converts conven-tional control lifts to LDS controls. Single Phase Only.

NET STSPRICE

S100045 DOR Drive-Thru Ramp Kit for SmartLift. Includes Spacer $420.52


11


FJ6115BK $243.97

EH (Extended Height) Auxiliary Adapters For Use When Raising Certain Vans Or Pick-Ups. Maximum Height 14 3/8" (365mm). Capacity 2,500 lbs. (1,134 kg) Maximum Per Adapter. Fits Any Surface Mount Or Inground, Frame-Engaging, RotaryLift Manufactured Since October 1973. Includes (4) FJ696 Adapters and 2 Piece Column or Wall-Mounted Adapter RackFJ6114.

FJ6133BKEH (Extended Height) Required To Lift 1988 Or Newer General Motors GMT400 Pickup Trucks. Maximum Height: 14" (356 mm)Capacity 2,500 lbs. (1,134 kg) Maximum Per Adapter. Fits Any Surface Mount Or Inground, Frame-Engaging, Rotary LiftManufactured Since October 1973. Includes (4) FJ6101 Adapters and 2 Piece Column or Wall-Mounted Adapter Rack FJ6114.

$259.30

Required For Raising Mini-Vans With Running Boards (i.e. Aerostar, Astro, Caravan, Voyager). Adjustable Range Provides4 7/8" to 6 3/4" Additional Height. Polymer Contact Surface Protects Undercoated Surfaces. Fits Any Surface Mount OrInground, Frame-Engaging, Rotary Lift Manufactured Since October 1973. Includes (4) FJ7858 Adapters and 2 PieceColumn or Wall-Mounted Adapter Rack FJ6114.

$283.21

FJ6138BK $150.19

FJ6139BK $157.54

Polymer Pad Adapter Provides 1/2" Additional Clearance. Fits Any Frame Engaging Rotary Lift Manufactured Since October1973. Includes (4) FJ697 Adapters, 2 Piece Column or Wall-Mounted Adapter Rack FJ6142.

High Step Polymer Pad Adapter Provides 2 1/2" Additional Clearance. Fits Any Frame Engaging Rotary LiftManufactured Since October 1973. Includes (4) FJ698 Adapters, 2 Piece Column or Wall-Mounted AdapterRack FJ6142.

NOTE: All Accessories Shown Above May Be Used With Most Frame Contact Models.Use Of Adapters Does Not Change Lift Capacity. Fits any Surface Mounted or Inground, Frame-Engaging Rotary Lift, Manufactured Since October 1973.

**

$188.80FJ7880BK

FA5911BK Air/Electric Utility Box Includes Filter/Lubricator/Regulator. Mounts Easily On Any 2-Post Surface Lift Except 84 and 74Series Lift. Provides Easy Access To Both Air And Electrical Outlets Making The Full Rise Lift A Complete Work Station.

FA5910BK Air/Electric Utility Box Same As Above Excluding Filter/Lubricator/Regulator. $212.10

$337.76

FJ6100BK $478.14

FJ6105BK $487.95

FJ6104BK $495.30

Includes (4) FJ696, (4) FJ697 And (4) FJ698 Plus 2 Piece Column or Wall-Mounted Adapter Organizer Rack Part #FJ6108.

Includes (2) FJ696, (2) FJ6101, (4) FJ697, (4) FJ698 Plus 2 Piece Column or Wall-Mounted AdapterOrganizer Rack Part #FJ6108.

Includes (4) FJ6101, (4) FJ697 And (4) FJ698 Plus 2 Piece Column or Wall-Mounted Adapter Organizer Rack Part #FJ6108.

$502.66Includes (4) FJ7858, (4) FJ697, (4) FJ698 Plus 2 Piece Column Adapter Organizer Rack Part #FJ6108.FJ6117BK

Frame Engaging Lift Accessories**

FA5112Full Size Shim Kits For 2-Post Light Duty Models Installations With Sloped Floors Requiring Full Size Base Shims, or For UseWith Front Post On SMO123. Includes A Variety Of Thicknesses To Allow Shimming Up To 1/2" In Height. NOTE:Shimming In Excess of 1/2" Per Column Requires Different Anchors -- Consult Factory.

$145.28

Power Unit Stand For Low-rise Lifts (Power Unit Not Included).FJ864BK $63.75

Lift Accessories

Full Size Shim Kit

NET STSPRICE

DESCRIPTIONMODEL

NUMBER

FJ6137BK

FA916 $210.26Air/Electric Utility Box Same As Above Excluding Filter/Lubricator/Regulator.

Air/Electric Utility Box Includes Filter/Lubricator/Regulator. Mounts Easily On Any 4-Post Surface Lift (except for SM30).Provides Easy Access To Both Air And Electrical Outlets Making The Full Rise Lift A Complete Work Station.FA915 $337.76

FJ6190YL $157.54Step Polymer Pad Adapter Provides 1" Additional Clearance. Fits Any Frame Engaging Rotary LiftManufactured Since October 1973. Includes (4) FJ6189 Adapters, 2 Piece Column or Wall-Mounted AdapterRack FJ6142.

1/2”

1”

2-1/2”

Air/Electric Utility Box Includes Filter/Lubricator/Regulator. Mounts Easily On SM30 Series Lifts. Provides Easy Access ToBoth Air And Electrical Outlets Making The Full Rise Lift A Complete Work Station.

FA2259 $337.76

FA2260 $218.84Air/Electric Utility Box Same As Above Excluding Filter/Lubricator/Regulator.

FJ6195YL $163.06

FJ6197 $249.49Set of four (4) FJ6214 rubber adapters. Required for use on 3-stage arms when lifting trucks or other frame vehicles.

Extended height auxiliary adapters’ version of FJ6115. 3” (76 mm) additional rise for a total 17 3/8” (454 mm).Includes a set of (2) FJ6196 adapters. Capacity is 2,500 lbs. (1,134 kg) per adapter.

Power Unit Stand For Use With Conventional and 700 Series SmartLifts In Mounting Single Power Unit(Power Unit Not Included). See When Ordering Lift.T110280BK $121.37

FJ6200 Set of Four (4) FJ6201 Thread-Up Adapters For SPO12 (-10, 300, 400 and 500 Series). $317.53

FJ6212KITYL $218.23Shorter version of FJ6115. Kit includes a set of (4) FJ6212 adapters and 2 piece column or wall mounted adapter rackFJ6114. Adapter height 7 3/8”. Capacity 2,500 lbs. (1,134 kg)

FJ6225 Set of four (4) FJ6202 round adapters. For use on 3-stage arms when lifting Uni-body construction vehicles. $249.49

Adapter Extension Kit for RA/TA SPO/A10, SPO12RA/TA 3-stage, SL210 3-stage (800 series & below) and SL212 LiftModels (not trio arms). Provides additional lifting height when vehicles require additional clearance or use on front or rearto level vehicle on lift. Includes four (4) FJ6171-1 (3.5" tall extension), four (4) FJ6171-2 (5" tall extension) and FJ6127 rackkit with mounting hardware.

N539 Column Base Plate Cover. Fits SPOA7-200 and above, SPOA9-200 and above, all SPOA10 series lifts. $30.04


12


FJ2427 $9.20 each(2 required)

Flat Polymer Pad Adapter Adds 1-1/2" Height. Rubber Pad Surface Measures 4-3/4" x 6-5/16”. Protects VehiclesWith Factory Applied Undercoating. 3,500 lbs. capacity per adapter.

FJ2428$14.10 Each(2 required)

DESCRIPTIONNET STS PRICE

MODELNUMBER CAPACITY

Rolling Jack For SM181 Only.RJ9000-1 $2,854.74

Rolling Jack For SM30 Series Lifts. For Passenger Cars and Light Trucks Only! $3,182.70RJ9000-2

Filler adapter kit for Rotary alignment racks/bolt-on alignment kits to accommodate three dimensional visual alignment instrumentationsystems. Included with purchase of any new Rotary alignment rack or bolt-on kit -- effective 2011. Standard color is yellow.FC7117 Kit $31.26

$6,287.54RJ15015,000 lbs.(6804 kg)

Heavy Duty Rolling Jack For SM30, Series Lifts. Capacity. Air/Oil Operated. Supplied With FD291 Combination FrontStraight Axle/“Flip Up” Rear Axle Support. Will Accommodate All Adapters Typically Used With FD282 Inground Saddle.

9,000 lbs.(4082 kg)

Flat Polymer Pad Adapter Adds 3" Height. Rubber Pad Surface Measures 4-3/4" x 6-5/16”. Protects VehiclesWith Factory Applied Undercoating. 3,500 lbs. capacity per adapter.

$95.02SB100017 Extended Height Adapter Kit To Pick Up SUV Straight Axle Type Vehicles. Kit includes (2) SB300055 7” Adapters.For RJ7000.

A Wheel Alignment Conversion Package For SM30 Series Lifts Including: (1) FC5394 Heavy Duty Carbon SteelTurntables (Pair) And Guides; (2) FC5396-21 Rear Leveling Plates; (1) FC5395 Heavy Duty Bolt On Work Step Kit;Recoil Hose; Necessary Hardware And Instructions. (Drilling Required.) FC7117 kit.

FC5396 $3,921.36

4-Wheel Alignment Retrofit Kit for SM/SMO series 4-post lifts. Rollback version (ideal for 3-D alignment equipment). Kitconsists of bolt-on kit, front turning Stainless Steel Radius Gauge Kit, rear slip plate kit and all necessary hardware (drillingand tapping required). Recommended for use with (2) Rolling Jacks for performing 4-Wheel Alignment. FC7117 kit.

S100074 $2,339.21

4-Wheel Alignment Retrofit Kit for DOR series 2-post lifts. Rollback version (ideal for 3-D alignment equipment). Kit consists ofBolt-on Kit, front turning Stainless Steel Radius Gauge Kit, rear slip plate kit, leveling legs, and all necessary hardware (drilling andtapping required). Recommended for use with (2) Rolling Jacks for performing 4-Wheel Alignment. FC7117 kit.

FA5501-1 $2,680.65

6,000 lbs.(2722 kg)SJ6000 Swing Air Jack For AR/SM Series Lifts. $2,965.08

Lift AccessoriesDrive-On Lift Accessories

SB100009 $355.54Extended Height Adapter Kit to pick up SUV’s. Includes (2) FJ6202, (2) SB300053ZN, (2) FJ2427, (2) FJ2428.

SB100018 $444.43Extended Height Adapter Kit to pick up SUV’s. Includes (2) FJ6202, (2) SB300053ZN, (2) SB500076YL.

SB100019 $462.20Extended Height Adapter Kit to pick up SUV’s. Includes (2) FJ6202, (2) SB300053ZN, (2) SB300055YL, (2) FJ2427,(2) FJ2428.

SB100020 $543.12Extended Height Adapter Kit to pick up SUV’s. Includes (2) FJ6202, (2) SB300053ZN, (2) SB500076YL, (2) SB300055YL.

S100080 Same as S100074 less radius gauges. $1,371.89

S100083 Same as S100074 with Carbon Steel Radius Gauges. $2,120.98

8,000 lbs.(3629 kg)SJ8000 Swing Air Jack For AR/SM Series Lifts. $3,368.44

$210.87(set of 4)FJ6211

Extended height adapters for pad lifts for use when lifting SUVs on pad lifts. Includes (4) FJ6205 7”truck adapters.

FC5193

FC5231

FC5213

$61.13 each(2 Required)


Flat Rubber Pad Adapters Add 1 1/4" Height. Rubber Pad Surface Measures 6" Square.Optional for RJ9000 Rolling Jacks Only.

Flat Rubber Pad Adapters Add 3 1/2" Height (low position), 4 1/2" Height (high position). RubberPad Surface Measures 4 1/2" Square. Protects Vehicles With Factory Applied Undercoating.

Optional for RJ9000 Rolling Jacks Only.

Flat Rubber Pad Adapters Add 2 5/8" Height. Rubber Pad Surface Measures 6" Square.Optional for RJ9000 Rolling Jacks Only.

FC5213-12$44.75 each(2 Required)

Flat Rubber Pad Adapters Insert Adds 5 7/8" Height (Use with FC5213 Adapters). Rubber Pad SurfaceMeasures 4 1/2" Square. Protects Vehicles With Factory Applied Undercoating. Base Not Included.

Optional for RJ9000 Rolling Jacks Only.


FC5974

FC5102

Radius gauge filler plate kit fits lifts with long recess.

Radius gauge filler plate kit fits lifts with standard recess.

$172.87

$145.28

SB100134 $92.56Sliding Adapter Extension Kit (Fits RJ7000Y Rolling Jacks). Easily extend the reach of the rolling jackfrom 57 1/4" to 68 1/2". Comes with 2 SB300084YL extensions. NOTE: These extensions are rated at1,700 lbs. capacity and de-rates the lift to 3,400 lbs. capacity when attached.

SB100027 $196.77

Sliding Adapter Extension Kit (Fits RJ7000Z Rolling Jacks). Easily extend the reach of the rolling jackfrom 57 1/4" to 68 1/2". Comes with 2 SB300072YL extensions and 2 SB300071 sliding extensions.NOTE: These extensions are rated at 1,700 lbs. capacity and de-rates the lift to 3,400 lbs. capacitywhen attached.

$95.02SB100003Extended Height Adapter Kit To Pick Up SUV Straight Axle Type Vehicles. Kit includes (2) SB300019 7” Adapters.For RJ6000.


$401.51 (Pair)

30 Gallon (114 Liter) Low Profile Rolling Drain Pan With Splash Guard, Drain Valve And Dust Cap. For QL4P, SM/SMO122, SM/SMO14 and SM18 (fits YA-12 only at 43” setting). $620.97

Bolt On Work Steps For All 4-Post Series Lifts.FC5378

FC5967

Ramp Chock Kit For Drive-Thru Bay Operation For Models SM/SMO14 and SM101. Ramps Have An Oil Resistant,Non-Skid Coating. Includes Two (2) S110302 Ramps (40-1/2”) and Hinge Pins.

$420.52S100075

Extended Ramp Chock Kit For Models SM/SMO14 and SM101. Ramps Have An Oil Resistant, Non-Skid Coating. 9" Longer RampLength Than Standard To Reduce Ramp Up Angle For Passenger Cars With Low Ground Clearance. ($51 Adder Only WhenSubstituted For Standard Length Ramps On New Lift Order.) Includes Two (2) S110303 Ramps (49-7/16”) and Hinge Pins.

$432.78S100076

8 Foot Long Oil Drain Hose With Quick Connect Fitting.FC5247 $78.46

Ramp Chock Kit For Drive-Thru Bay Operation For Model SM18. Ramps Have An Oil Resistant, Non-Skid Coating. Includes Two(2) FC5810-43 Ramps and Hinge Pins. $550.47FC5825

FC5780-3 $337.76 Each(2 Required)

Additional Ramp Chocks For Drive-Thru Bay Operation For SM300-200 Series Lifts. Ramps (40”)Have An Oil Resistant, Non-Skid Coating. For SM300-100 Series Lifts, Order # FC5225-52.

$546.18 Each(2 Required)

30 Gallon (114 Liter) Low Profile Rolling Drain Pan With Splash Guard, Drain Valve And Dust Cap. For SM30 Series Lifts. $786.48FC5968

13

FC5781-7

S100013

Extended Ramp Chocks For SM300-200 Series Lifts. Provides 33" Longer Ramp Length Than Standard To ReduceRamp Up Angle For Passenger Cars And Motor Homes With Low Ground Clearances. Ramps (72”) Have An OilResistant, Non-Skid Coating. For SM300-100 Series Lifts, Order # FC5254-12.

Extended Ramp Chock Kit For Model SM18. Ramps Have An Oil Resistant, Non-Skid Coating. 6 1/2" Longer RampLength Than Standard To Reduce Ramp Up Angle For Passenger Cars With Low Ground Clearance. ($51 Adder OnlyWhen Substituted For Standard Length Ramps On New Lift Order.) Includes Two (2) S110085 Ramps and Hinge Pins.

$598.29

Lift Accessories

Drive-On Lift Accessories

$2,083.59FC613 Rolling Tray For SM30 Series Lifts. (Bottle Jacks Not Included) 15,000 lbs.(6804 kg)


DESCRIPTIONNET STS

PRICEMODEL

NUMBER CAPACITY

Rolling Jack Tray For SM/SMO122, SM/SMO123 and SM/SMO14. (Bottle Jacks Are NotIncluded)FC663

7,000 lbs.(3175 kg)

$399.68

SmartLift Trio Adapter KitsNET STS

PRICE

DESCRIPTION(-1,000 Series and Above)

MODELNUMBER

T100272 Rubber adapter kit for the NEW Trio Superstrucure. Includes four (4) FJ6219 adapters.

T100273 Truck adapter kit for the NEW Trio Superstrucure. Includes four (4) T110564 adapters.

T100274 Flip up adapter kit for the NEW Trio Superstrucure. Includes components for four (4) arms.

T100271

Adapter Extension Kit for SL210 with NEW TRIO Superstructure. Provides additional lifting height whenvehicles require additional clearance or use on front or rear to level vehicle on lift. Includes four (4)T130660 (3.5" tall extension) and four (4) T130661 (5" tall extension).

$192.48

$254.40

$254.40

$254.40

Accessories for YA12 and Y12

Z100006 Extended rear ramps (add $51 when ordering with lift in place of standard ramps). $502.05

Z100007 Flush rear ramps (add $51 when ordering with lift in place of standard ramps). $502.05

Z100008

Z100009

Z100010

Z100012

Z100013

Z100017

Z100020

FA5157

S130205

Z100022

MODELNUMBER DESCRIPTION

NET STSPRICE

Standard 54” front ramps (drive-thru). $492.24

Extended 70 15/16” front ramps (drive-thru). $511.24

Flush front ramps (drive-thru). $511.24

Full Size Base Shim Kit (6 shims @ 1/4" & 6 shims @ 1/8" = total 2 1/4”). $232.94

Full Size Base Shim Kit (4 shims @ 1/2" = total 2”). $232.94

Hose relocate kit. Longer hoses and wires to locate control cabinet in front of lift (rear is standard). $256.23

Spacer tool. $68.66

Carbon steel 12" x 14" x 1-1/2" radius gauge (2 required). $373.32

Stainless-steel 12" x 14" x 1-1/2" radius gauge (2 required). $483.66

Y-Lift Radius Gauge Filler Kit (contains two Z120081 filler weldments and hardware). $210.26


FC134-17 Portable Work Step. 350 lb. capacity. $78.46

$636.29FC5268 Four Wheel Steer Slip Plate Kit (retrofit) for SM123 Series and below (only does 1 side).

FA5155Standard Turning Radius Gauge Kit. Includes Two Standard Turning Radius Gauges --Part #FA5157; and Four Retaining Bars -- Part #FA5153-1. (4,500 lbs. (2041 kg) capacity)

$798.13

TT1001Stainless Steel Turning Radius Gauge Kit. Includes (2) FA5153 S/S radius gauges; and FourRetaining Bars -- Part # FA5153-1. (3,000 lbs. (1360 kg) capacity)

$1,144.47

$449.33For a Wash Bay, order the following:

Stainless Steel Equalizer Cables For SPO9/SPOA9 Lifts. $179.61 each (2 required)

Stainless Steel Latch Cable. $33.10FJ7923

Splash Guard To Protect Power Unit Motor Assembly. $43.52FA595

Power Unit Bracket Extension. $28.20FA7129

KITNUMBER

GSA NETPRICE

DESCRIPTION

N326 / N325

Wheel Service Accessories

Two-Post / Lift AccessoriesMODEL

NUMBER NET STS

PRICEDESCRIPTION

$70.50Door Defender: Allows technicians to easily enter and exit the vehicle without damaging their customer’s vehicle. Lowprofile solid rubber guard designed to fit over the two-post lift carriage. Includes 1 Door Defender, adhesive to attach tothe lift and instructions.

N823

1

Lift Accessories

Stainless Steel Equalizer Cables (2), Stainless Steel Latch Cable and Splash Guard.(Not available in Dual Control Models.)

Full Size 1/4” Shim Kits For Installations With Sloped Flooring Requiring Full Size Base Shims. Allows Shimming From 2"To 4" Height On Rear End of Lift. For SM/SMO123, AR/ARO123, QL Models, SM18 and SM30 Lifts.FC5414 $262.98

Full Shim Kits

FA5191Tool Holder (Patent Pending) Keeps air guns, torque sticks and other tools within reach. Mounts easily in holes alreadydrilled and tapped in the two-post column.

$54.56

Stainless Steel Equalizer Cables For SPO10/SPOA10 Lifts. $179.61 each (2 required)N3106 / N3105

Overhead Cutoff Switch Assembly Mounts Easily On Ceiling Or Overhead Beams Where Limited Ceiling Height OrExcess Vehicle Height Is A Problem. Single Phase Electrical Required. $188.80FA7118

$215.16Three Phase PowerOptional 4-HP 3kw, 3 Phase, 60 Hz Power Unit For Use With Y Lift Series, Four-Post Series, SL Series, Two-Post OverheadDesign Lifts Only. Must Specify When Ordering. Price In Addition To Standard Unit Price. 208/230 or 460 Volt Must BeSpecified.

Electrical / Power Unit / Overhead Switch Options

Two-Post / Wash Bay Accessories

14

Full Size Shim Kit For Front Of SMO14/ARO14 Open Front Lifts. Contains Two 1/4” Shims And Four 1/16” Shims.S100093 $145.28

S130205Stainless Steel Turning Radius Gauge (Two Required Per Lift). No Pointer. 4,500 lbs. (2,041kg)capacity.

$483.66 each(2 required)


Stainless SteelShield Kit

S100096

S100095

FC7118

S100052

Rear stainless steel shield kit for AR/ARO14. $901.72

Front stainless steel shield kit for AR/ARO14. $809.77

Rear stainless steel shield kit for AR/ARO12. $703.72

Front stainless steel shield kit for AR/ARO12. $809.77

Drive-On Shim Kits

Special Paint

Same as FA7118 but for Three Phase. $230.49FA7385

Standard Colors Red And Blue. Gray And Black Are Available At No Additional Charge, But Are Considered Non-Standard And Subject To Lead Time Restrictions AndOrder Cancellation Penalties. Other Non-Standard Colors Or Shade Variations Are Available For An Additional Charge, But Also Subject To Lead Time Restrictions AndCancellation Penalties. Consult Factory For Pricing.

15

Heavy Duty IngroundModular UnitsSelf-Contained

NET STSPRICE

***MODELNUMBER

CAPACITY RISE

$44,139.07MOD30M- 24

MOD30M-18 $44,139.0730,000 lbs.(13608 kg)

MOD30M- 21 $44,139.07

Standard Equipment: Specified Track Length, Totally Contained Steel Enclosure Sealed and Protected With Enviroguard, LDS Liquid Detection System,Multi-Stage Piston Assembly, Multi-Position Remote Release Locks, Electronic Jack Spotting Device, Programable Height Positions, Saddle and SlidingAdapters.

DESCRIPTION

30,000 lbs.(13608 kg)

30,000 lbs.(13608 kg)

* See Adapter Kits to select Adapters according to lift application. ** See the Wheelbase Chart to select the required frame length. *** Pocket opening of 51” standard. Shutter plates not available on 10’ housings. For use with 3-post lifts.

Modular Movable Jack Unit With** 21’ Long Track.

Modular Movable Jack Unit With **24’ Long Track.

NET STSPRICE

**MODELNUMBER

CAPACITY RISE

MOD30S $26,600.5230,000 lbs.(13608 kg)

70”(1778mm)

Modular Stationary Jack Unit.(*not equipped with adapter kits)

*See Adapter Kits to select adapters according to lift application.

** Pocket opening 48” standard with 42” option available; Specify on purchase order.

**MODELNUMBER

DESCRIPTION

DESCRIPTIONNET STS

PRICE

MC2 For 2-Post Lift Configuration - Console With VEC Equalized Controls.

For 3-Post Lift Configuration - Console With VEC Equalized Controls.

Note: When ordering controls, place a dash after the model number and add the voltage required.

EXAMPLE - (MC2-230V). Available as 208-230VAC 3PH, 460VAC 3PH, or 575VAC 3PH.

(*not equipped with adapter kits)



Standard Equipment: Specified Track Length, Totally Contained Steel Enclosur Sealed and Protected With Enviroguard, LDS Liquid Detection System,Multi-Stage Piston Assembly, Multi-Position Remote Release Locks, Programable Height Positions, Saddle and Sliding Adapters.

$10,173.35

$15,503.38

70”(1778mm)

70”(1778mm)

70”(1778mm)

Stationary Plunger Modular Unit

Movable Plunger Modular Unit

Modular Unit Controls

MC3

Modular Movable Jack Unit With** 18’ Long Track.

MOD30M-10 $44,139.0730,000 lbs.(13608 kg) (*not equipped with adapter kits)

70”(1778mm)

Modular Movable Jack Unit With 10’ Long Track.

MOD30M less Housing $23,330.17

Housing only for split shipments (specify 18’, 21’ or 24’ frame). (Parts box included.) $20,808.90

MOD30S less Housing $15,048.54

Housing only for split shipments (parts box included). $11,552.60


16

Adapter Kits

MODELNUMBER DESCRIPTION NET STS

PRICE

Adapter kit for most School Bus applications. For use on (2-Post lift configuration).

Adapter kit for most Heavy Duty Truck applications. For use on (2-Post lift configuration).

Adapter kit for most Transit Bus applications. For use on (3-Post lift configuration).


$4,098.52MC100009 Optional Hand Held Pendant Control Kit - MOD30 only. Festoon included.

$3,779.15

$3,779.15

$6,101.80

$5,411.56

Adapter Kits for Modular Lift Configurations

AK-SBA60-2

AK-HTA60-2

AK-ULP90-3

AK-HTA90-3


Adapter kit for most Low Profile Transit Bus operations. For use on (2-Post lift configuration). $4,468.77AK-ULP60-2

$1,014.52FD2356 Low Profile Saddle (no adapters) (flat plate)

2-Post MOD30 Cover Plate Kit for covering installed housings prior to installation of components and shutterplates. $1,721.30

3-Post MOD30 Cover Plate Kit for covering installed housings prior to installation of components and shutterplates. $2,582.57

Universal Adapter Stand Kit. $121.99FD2361BK


$2,252.16FD2408 Ultra Flat Low Profile Saddle with 2 sets of inserts included (choose 2 part #s FD2379, FD2380, FD2381,FD2383, FD2384, FD2385). See adapter guide for description. Compatible with older MOD 30s.

$239.07FD2382 3 Hole Sliding Adapter For FD2347 Saddle -- must order 2.

Accessories and Options

NOTE: Include IN20587 (MOD30 data sheet) with order.

FD7172 2HP slip clutch kit. $1,153.05

FD7171 1/2 HP slip clutch kit. $1,153.05

MC100021 Liquid Evacuation Kit for 2-Post MOD30. $1,719.47

MC100022 Liquid Evacuation Kit for 3-Post MOD30. $2,344.73

FA2452 MOD30 single locking leg replacement (new style). $900.50

NET STSPRICE

MC100020 Optional Hand Held Pendant for use on floor or Class I Division II areas $3,473.26


Copyright © 2014 by Rotary Lift, a Vehicle Service Group LLC Brand. All Rights Reserved.All Drawings, Illustrations, Model Numbers And Descriptions Are All Copyrighted Materials. Unauthorized Use Is Prohibited.17

EFX60/90Heavy Duty Inground Scissor Lift

NET STSPRICE

MODELNUMBER

CAPACITY RISEDESCRIPTION

NET STSPRICE

MODELNUMBER

CAPACITY RISE

MODELNUMBER

DESCRIPTION

DESCRIPTION GSA NETPRICE

Stationary Scissor Unit

Movable Scissor Unit

Scissor Unit Controls


NET STSPRICE

Accessories and Options


NET STS PRICE

Adapter kit for most School Bus applications. For use on (2-Post lift configuration).


$3,779.15

$3,779.15

Adapter Kits for Scissor Lift Configurations

AK-SBA60-2

AK-HTA60-2

Adapter kit for most Low Profile Transit Bus operations. For use on (2-Post lift configuration). $3,779.15AK-TRLP60-2

EFX-10

EFX-13

EFX-17

30,000 lbs.(13608 kg)

30,000 lbs.(13608 kg)

30,000 lbs.(13608 kg)

70”(1778mm)

70”(1778mm)

70”(1778mm)

70”(1778mm)

Movable scissor unit with 10’ track, 120” of travel, notequipped with adapter kits. Cover plates included.



$41,276.97

$41,276.97

$41,276.97

30,000 lbs.(13608 kg)

Stationary scissor, 48” pocket opening, not equipped withadapter kits. $23,738.43

$10,173.352 ScissorControl

2-post configuration console, 10hp 3ph motor available in 208, 230 460 and 575v.

EFX0509165000 2 Scissor Pendant - hand held. No Festoon.

Shims available in 10 gauge thickness.

$4,129.78

EFX-60-S

EFX-TANDEM60,000 lbs.(27216 kg)

70”(1778mm)

Movable scissor unit with stationary scissor, 84” of travel,not equipped with adapter kits. Cover plates included. $65,016.01

$15,503.383 ScissorControl

3-post configuration console, 15hp 3ph motor available in 208, 230 460 and 575v.

Adapter kit for most Heavy Duty Truck applications. For use on (3-Post lift configuration). $5,411.56AK-HTA90-3

Adapter kit for most Low Profile Transit Bus operations. For use on (3-Post lift configuration). $5,411.56AK-TRLP90-3

EFX1008161000 3 Scissor Pendant - hand held. No Festoon. $5,409.73

Universal Adapter Stand Kit. $121.99FD2361BK

$4.29

$4.90

$5.52

Shims available in 1/4” thickness.

Shims available in 1/2” thickness.

EFX0906211002

EFX0906211003

Include IN20597 with EFX order!

EFX0906211004


NWAYLENGTH


MODELNUMBER

CAPACITY

$61,109.3630/26 S 4-Leg Surface Mounted Clear Floor Open Base Parallelogram Lift 30,000 lbs.(13608 kg)

26 ft.(7.9m)

$64,676.4036/28 S 4-Leg Surface Mounted Clear Floor Open Base Parallelogram Lift

$73,300.7036/28 F 4-Leg Flush Mounted Clear Floor Open Base Parallelogram Lift









36,000 lbs.(16330 kg)

28 ft.(8.5m)

50,000 lbs.(22680 kg)

26 ft.(7.9m)

50,000 lbs.(22680 kg)

32 ft.(9.7m)

75,000 lbs.(34020 kg)

30 ft.(9.1m)

100,000 lbs.(45360 kg)

42 ft.(12.8m)

Generation 5Parallelogram Lifts



75,000 lbs.(34020kg)

48 ft.(14.6m)

MAXIMUMWHEELBASE

276 in.(7010 mm)

300 in.(7620 mm)

276 in.(7010 mm)

348 in.(8839 mm)

324 in.(8230 mm)

468 in.(11887 mm)

540 in.(13716 mm)



50,000 lbs.(22680 kg)

28-1/2 ft.(8.7m)

290 in.(7366 mm)

NOTE: SHIMS, FULL BASE PLATE SHIMS AND ANCHORS ARE NOT PROVIDED with Rotary Parallelogram Lifts. Consult the EquipmentFoundation Requirements (EFRs) for the specific lift model. EFRs are available through Rotary Lift Customer Service and on the RDW.

NOTE: Capacities above 100,000 lbs. -- call for quote.

NOTE: INCLUDE IN20564 WITH PARALLELOGRAM ORDERS!



45,000 lbs.(20412 kg)

35 ft.(10.6m)

384 in.(9754 mm)



50,000 lbs.(22680 kg)

48ft.(14.6m)

540 in.(13716 mm)

Rotary Advantage Parallelogram Lifts (without tape switches)

Copyright © 2012 by Rotary Lift, a Vehicle Service Group LLC Brand. All Rights Reserved.All Drawings, Illustrations, Model Numbers And Descriptions Are All Copyrighted Materials. 18

$69,259.1930/26 F30,000 lbs.(13608 kg)

26 ft.(7.9m)

4-Leg Flush Mounted Clear Floor Open Base Parallelogram Lift 276 in.(7010 mm)


Parallelogram Lifts


MODELNUMBER

Rotary Advantage Accessories

$7,890.54RJ25000L 25,000 lbs. (11340 kg) Rolling Jack with lock.


$1,941.37Built-in Air

$3,352.508 ft. (2.44m) Drive-thru Ramp Kit (with lift)

$687.7910 ft. (3m) Ramps (adder to standard lift cost)

$618.52Light Kit (pair)

$335.31Audible Descent Alarm

$310.18Height Limiter

$2,259.52Retractable Wheel Kit for Rolling Jack

$69.88Tapeswitch (per ft. example: 75/48 outside only 112x48=5376)When ordering specify Inside, Outside or Both.

$3,256.87High Lift Wheel Dolly -- 850 lbs. (386 kg) Capacity. Rise 71”. Side Shift 17”.

$14,653.15Includes zinc galvanized primer with marine grade epoxy top coat, stainless steel baseplate,EnviroGuard coated control panel and stainless steel remote panel included. $18,737.57

4-Leg

6-Leg

8-Leg

APAIRKIT

APRAMP8

APRAMP10

AP LIGHT KIT

APAUDALARM

AB100004KITRD

AP09525

Cord for Laptop Programmer (FA7654 and FA7655) $217.62

APAUXHT

8’ Drive-Thru Ramp Kit (without lift)APRAMP8DTKIT $4,125.49

8 ft. Drive-thru Ramp

10 ft. Drive-thru Ramp

Light Kit

Descent Alarm

Height Limiter

Retractable Wheel Kit

Laptop Cord

8 ft. Drive-thru Ramp (w/o lift)

Washbay Kit*

$74.17Lifting Bracket for Runways (2 required)AL500032

$256.23Full Base Plate Shim for Gen. 5 6” and 7” Cylinder Machines

*NOTE: Because of the environment of the typical wash bay application for the Rotary Parallelogram Lift, the entire lift is subjected to harsh cleaning chemicals, road chemicals coming off of thevehicles and constant contact with water and moisture. Even though we take extra precautions to assure that the surfaces of the lifts and listed components of the Wash Bay Kit Option are properlyprepared, primed and finished, we do not have any control over the environment and we can only guarantee the surface to be free from rust and other corrosion for a period of one year from thedate of installation. Any expressed or implied warranty to the contrary, is excluded and is not covered. In all cases, the standard Rotary Limited Warranty applies. Washbay lifts are not availablefor Extended Warranty.

$22,818.31

Zinc galvanized primer with marine grade epoxy top coat ONLY $6,027.02

For GenII/III or Gen IV. Allows adjust of running dimension.Specify model and S/N when ordering.

Adjustable Foot Pad $4,689.45

$3.68

.060” x 3” x 3” Finger Shims (1.53mm x 76.2mm x 76.2mm)

$4.29


Shim -- 3” Finger; .250 Thick (6.35mm x 76.2mm x 76.2mm)

$3.68

$4.29


$4.90



AP00401

AP00402

AP00403

AP00406

AP00405

AP00407

$3.07Shim

Shim

Shim

Shim

Shim

Shim

Tapeswitch

Lift Bracket

Shim Plate


Hand Held Programmer Cord $68.04Programmer Cord AP02508

19

AC100003


Remote Panel(included on WB models)

Surface Lift, Stainless SteelAC300016

Flush Lift, Stainless SteelAC300018

$2,659.19

$2,659.19


Number ofColumns

NET STSPRICEDESCRIPTION *RISE

MODELNUMBER

Hydraulic Portable Truck And Bus Lifts

20

MACHTM Mobile Lifting Systems

MCH18AC Wired $18,957.50

69"(1753 mm)

$56,871.37

Portable Lift. Wheel Pick-Up, Electro Hydraulic System with Movable Forks.208/230/460 VAC. Sold in groups of 2 with wired communication.

*Lift Rise Is Measured From Floor Level To Bottom Of Adapter.

MCH18Wired

$34,468.2769"

(1753 mm)

18lb Per Column Capacity Portable Lift. Electro-Hydraulic System WithAdjustable Forks. 24VDC Battery Operated With 110V Charging System.Sold in groups of 2 with wired communication.

$51,700.74

$19,621.44

69"(1753 mm)

MODELNUMBER

Saddle Cross Beam With Two (2) Support Blocks For Frame Pick-Up. For HP and MCH Models.32,000 lbs Capacity at 72” adapter spread. 24,000 lbs. Capacity at 49” adapter spread. $1,407.45ML41

RS1852

RS33

Screw-Type Adjustable 34.3 "-55.5" (870mm - 1410mm). 18,000 lbs. (8165 kg) Capacity.

Screw-Type Adjustable 55.31"-82.28" (1405mm - 2090mm). 33,000 lbs. (14970 kg) Capacity.

$568.86

$1,113.21

Ramp style cross beam with (2) ramps for RV pick-up. Capacity 22,000 lbs. For HP and MCH Models.FD2353 $1,625.06

$639.36RS18 Screw-Type Adjustable 56.1"-82.3" (1425mm - 2090mm). 18,000 lbs. (8165 kg) Capacity.

Forklift Ramp Kit used with the MCH418 series to utilize two MCH columns to service forklifts. Easilyattaches to the base of the column and provides clearance needed to raise 4-wheeled forklifts with a weightof 10,000 lbs. (NOTE: Most 6,000 lb. capacity trucks weigh 10,000 lbs. or less; however, the truck weightshould be verified before being lifted.) For Drive-on/Back-off operation.

$5,215.40M140004

Same as above for Drive-through operation. $5,215.40M140012

Fore and Aft, frame-engagement lifting kit for use with two MCH18 series columns. Maximum capacity7,500 lbs. per MCH column. FOR MCH MODELS ONLY. $1,842.07M140005

24VDC led service lamp kit (2 rectangular lamps) for MCH series lifts. Operates on column’s battery power. $522.89M140002

Long Fork Kit. Each kit includes two 22” forks (8” longer than standard) and two 8” leg extensions. Reducescapacity of column to 12,000 lbs. FOR MCH MODELS ONLY.M140001

Pendant for MCH4 or 6. $1,043.33M140003

Wireless upgrade kit -- upgrades a single column. RETROFITABLE FOR SOME MCH LIFTS. (CALLFACTORY)

$1,588.28M140024

Low Profile Cross Beam With Two (2) Support Blocks For Frame Pick-Up. For HP and MCH Models.30,000 lbs Capacity at 49” adapter spread. 21,000 lbs. Capacity at 25” adapter spread. $3,082.16M140070

Cart for fore and aft frame lifting kit for storage and moving.M110108BK $585.42

Weight gauge for Monarch power unit.

Long Fork Kit. Each kit includes two 20” forks (6” longer than standard) and two 8” leg extensions. Reducescapacity of column to 14,500 lbs. FOR MCH MODELS ONLY.M140041 $659.59

(each column)

24VDC led service lamp kit (2 round lamps) for MCH series lifts. Operates on column’s battery power. $469.56M140082

DESCRIPTION NET STSPRICE

Pendant Control

M140019

Wireless Upgrade(per column)

$122.60Weight Gauge

M120304 Large Wheel Adapter $87.66

2

4

6

$17,234.14

MCH18Wireless 18lb Per Column Capacity Portable Lift. Electro-Hydraulic System With

Adjustable Forks. 24VDC Battery Operated With 110V ChargingSystem. Sold in groups of 2 with wireless communication.

$39,242.32

$58,864.32

2

4

6

2

4

6

$37,914.99

Hydraulic Portable Truck And Bus Lifts AccessoriesAnd Options

MCH418Wired

MCH618Wired

MCH418Wireless

MCH618Wireless

MCH418AC Wired

MCH618AC Wired

$659.59(each column)

Lifts without batteries deduct $685 list per pair.

Effective Novembe2014

oh sts price sheet 2014 - ohio · price model *rise capacity number surface mounted, 2 stage...

Documents