oil & gas - · pdf filedeliver all turnkey structural, mechanical and piping projects...
TRANSCRIPT
RCR has extensive experience in providing integrated asset-lifecycle support services that deliver greater cost efficiencies and improved productivity for our clients in the oil & gas sector.
We have developed a high value capability set to support the complexity and global nature of the sector.
Today we specialise in the delivery of project management, process engineering (power generation), modular construction, commissioning services and brownfield engineering, operations and maintenance services for oil and gas projects of all sizes and complexities.
We aim to maximise the value of our clients’ projects through excellence in project execution, cost efficiency and enhanced productivity performance.
Superior Integrated Solutionsfor the Oil & Gas Sector
Our Expertise
SMP
Market-leading engineering, procurement and construction expertise from complete module supply through to site based construction projects. We deliver all turnkey structural, mechanical and piping projects including upgrades, maintenance, protection and monitoring services.
E&I
We provide a comprehensive range of electrical services and products, including HV/LV installation, sub-stations, transformers, cables and switchgear, along with mechanical control devices, monitoring, process control and instrumentation services.
Power Generation
Gas turbine power stations, supply of fabrication and assembly of pipe spools, structures and skids, installation of mechanical equipment and erection of steelwork associated with GT sets.
Water
Construction and installation of desalination plants, effluent treatment plants, waste water systems, storage tanks and pumping stations, cooling systems, potable water plants, fire systems, and site run process water systems.
RCR’s industry-leading engineering facilities and regionally-based workshops throughout Australia focus on supporting the resources and infrastructure sectors.
RCR is an engineering-led business, and using our significant technical intellectual property we have been able to create and maintain a strong competitive advantage.
Our various operations across Australia, including manufacturing workshops covering in excess of 30,000 square metres, have full access to the latest technology - and can offer detailed integrated solutions to a variety of engineering challenges across the sectors in which we operate. Facilities include Fabrication and Machining Shops and fully-equipped electrical manufacturing workshops. We continue to invest heavily in these facilities – some are the largest of their kind in the Southern hemisphere - in addition to expansion through newly-built facilities.
Our award-winning, leading edge technology provides greater efficiency, durability and value to our clients.
RCR’s leading asset support services include:
• Project management, planning & execution of Major Shutdowns & Turnkey projects
• Engineering design – Mechanical, thermal & piping• Pressure equipment manufacture & overhaul – all
materials• HVAC services & communications infrastructure• Boiler overhauls (Superheaters, Convection Banks,
Economisers)• Specialist pressure welding – ASME IV, AS3992, BS
EN287 or 288• Structural and Mechanical Piping – Shop or site
fabrication & Installation• Gas reformer refurbishment technology - orbital TIG
welding techniques• Rotating and mechanical equipment overhaul including
pumps, turbines & fans• Balancing of rotating equipment components• Turbine auxiliaries overhaul• Valve component manufacture & overhaul inclusive of
satellite overlay & machining• Safety valve overhaul & re-certifications• On site machining and flange facing• Condenser and heat exchanger cleaning• Heat exchanger tube sleeving and tube inserts• Cooling water systems overhauls• Insulation and scaffolding• PWHT (Post weld heat treatment) & normalising• Heat treatment services – through specialised facilities
and on site services
Services & Technology
RCR works with some of the world’s largest energy and resources companies to engineer, construct, commission and maintain a comprehensive range of infrastructure for Oil & Gas projects. We provide a full range of operational and maintenance solutions to maximise the life and profitability of operating assets.
Fabrication & Manufacturing SolutionsOur capabilities range from light structural steel and pipe work fabrication to heavy structural fabricated components. Facilities include: machining facilities and a full range of welding capabilities including aluminium, stainless steel, TIG, MIG, SAW and FCAW; as well as plate rolling facility with machining and stress relieving capabilities for:
• Structural Steel Fabrication• Pressure Vessel Manufacture• Wellhead platforms• Preassembled pipe racks (PAR)• Preassembled units (PAU)• Process module and skids• FPSO Turret & Swivel stacks• Subsea modules• Pipe spools• Vessels and tanks
Pressure EquipmentRCR is an Australian leader in the design, supply, manufacture, installation and maintenance of pressure retaining equipment. Focusing on a complete solutions approach to our client base, including; plant process design and optimisation, 3-D design capability, off-shore manufacture, project management, total overhaul/maintenance, pressure parts design and supply, construction, installation and commissioning.
Heat Treatment ServicesOur Heat Treatment business has an extensive portfolio of thermal engineering and heat treatment services. Our facilities are among the most comprehensively equipped in the southern hemisphere, and include the largest permanent stress relieving furnace in Australia.
RCR has the expertise and technical capability to deliver a wide variety of heat treatment requirements including:
• Consultancy • Stress relieving• Ageing• Post-Weld Heat Treatment• Pre-heat• Curing of protective coatings or composites• Moisture removal• Refractory dryouts• Annealing and solution annealing• Normalising• Interference and shrink fit heating• Temperature logging and recording• Process start up
E&I Construction & MaintenanceWe provide market leading services in electrical, data & communications, fire protection and power generation services. Our specialist capabilities include:
• Electrical & Instrumentation• HV & LV reticulation• High Voltage plant• Fibre networks• Data & communications systems• Process control systems• Fire detection & suppression• Turnkey generation systems• Switchboard & MCC manufacturing
SMP Construction & MaintenanceWe deliver multi-disciplinary services for the Oil & Gas industry, across:
• Onshore O&G and LNG facilities• O&G process modules and skids• Wharf infrastructure• Offshore manning projects• Mineral processing plants
We also provide technical services in planning & scheduling, civil subcontracting, reliability engineering, failure analysis and predictive maintenance. We deliver highly responsive, flexible teams with a strong commitment to safety, quality and efficiency.
RCR’s scope in this landmark project is to support CKJV with SMP/E&I construction and commissioning works on the 15 mtpa LNG Plant on Barrow Island. This contract showcases some of RCR’s core capabilities within one of Australia’s most exciting and iconic resources projects. RCR’s experience at Barrow & Curtis Islands; Pluto LNG and Karratha Gas Plants for Woodside Energy; and the Moomba and GLNG facilities for Santos has positioned us for growth in the key oil & gas sector, particularly for major ongoing maintenance revenues.
RCR scope at the Curtis Island facility included installation of CCTV, Access Control, VOIP and LAN systems; installation, termination and testing of fibre optic and copper cabling; and HVAC consultancy, repairs, maintenance and training delivery.
The scope of work for this electrical and Instrumentation installation and testing contract included HV & LV cables and terminations, cable ladder installation, instrument calibration, installation and commissioning, communications cable and terminations and g eneral light and power installations within Hazardous area Zone 1 and Zone 2.
Field Compression
StationsClient: QGC
Location: Surat Basin, QLD
Curtis IslandLNG
Client: APLNG - Conoco Phillips/Bechtel
Location: Curtis Island, QLD
GorgonBarrow islandClient: Chevron/CKJV
Location: Barrow Island, WA
Engineering, procurement, construction and maintenance expertise for the mining and oil & gas sectors. Technology leader for surface mining and bulk materials handling.
Resources
Technology leader in power generation and energy plants.
Energy
Leading provider of rail, transport, renewable energy, telecommunication, water, electrical and instrumentation, HVAC, property services and facilities management solutions.
Infrastructure
SydneyLevel 39 50 Bridge StreetSydney NSW 2000 +61 2 8413 3009
PerthLevel 6 251 St Georges Terrace Perth WA 6000 +61 8 9355 8100
MelbourneLevel 13 717 Bourke Street Docklands VIC 3008 +61 3 8378 2300
New Zealand 8 Westfield PlaceMt Wellington, Auckland NZ 1060 +64 9 694 9625
MalaysiaA-19-4, Northpoint Offices,Mid Valley City,No. 1 Medan Syed Putra Utara,59200 Kuala Lumpur, Malaysia +60 3 2282 3292
rcrtom.com.au
RCR Tomlinson LtdABN 81 008 898 [email protected]