oil gas separators & internals - chemsept engineering-...
TRANSCRIPT
www.chemsept.in │ [email protected] │ +91-9763-36-4744
ChemSepT™ Engineering Pvt. Ltd
Project│Design│Manufacturing│Procurement│Service│Commissioning
Oil-Gas
Separators & Internals
Product Code: CSE-SEP_INT
Any solids such as sand will also settle in the bottom of the separator. These sepa-
rating vessels are normally used on a producing lease or platform near the well-
head, manifold, or tank battery to separate fluids produced from oil and gas wells
into oil, gas and water.
Separators in oilfield terminology designate a pressure vessel used for
separating well fluids produced from oil & gas wells into gaseous and liquid
components. The goal for ideal separator selection and design is to separate
the well stream into liquid-free gas and gas free-liquid. Separators work on
the principle that these components have different densities, which allows
them to stratify when moving slowly with gas on top, water on the bottom
and oil in the middle.
Multiphase Separation Facility | Efficient Separation |
SEPARTOR & INTERNALS
ChemSepT™ Engineering│Project│Design│Manufacturing│Procurement│Service│Commissioning
www.chemsept.in │[email protected] │ +91-9763-36-4744 Product Code: CSE-SEP_INT
www.chemsept.in │[email protected] │ +91-9763-36-4744 Product Code: CSE-SEP_INT
ChemSepT™ Engineering│Project│Design│Manufacturing│Procurement│Service│Commissioning
CSE-HSep Orientation: Horizontal
Commonly used for multiphase separation &
liquid-liquid separation.
Used where head room is restricted
Chosen if large liquid slugs have to be
accommodated
For De-gassing or Foam breakdown
CSE-VSep Orientation: Vertical
Commonly used if there is a large amount of
vapor to be separated from a small amount of
the light and heavy liquid.
Liquid Removal efficiency doesn’t vary
with liquid level
Generally smaller vessel volume
ChemSepT™ Oil & Gas Separator Types:
Horizontal Separator (CSE-HSep)
Vertical Separator (CSE-VSep)
Separator Systems Includes:
❶ Test Separtors ❷ Oil/Water Coalescers ❸ KO & FWKO Drums
❹ Gas Dehydration ❺ Production Separator ❻ Production Separator
❼ Cyclon Separators ❽ Flare Drums ❾ DeSanders
www.chemsept.in │[email protected] │ +91-9763-36-4744 Product Code: CSE-SEP_INT
ChemSepT™ Engineering│Project│Design│Manufacturing│Procurement│Service│Commissioning
Our gas and oil separators have proven themselves in service. Avail-able in a range of custom sizes and configurations, they offer cost-effective solutions for greater well production.
Manufactured to ASME & API re-quirements, our vertical and hori-zontal separators are used for gas, water, sand and oil separation.
www.chemsept.in │[email protected] │ +91-9763-36-4744 Product Code: CSE-SEP_INT
ChemSepT™ Engineering│Project│Design│Manufacturing│Procurement│Service│Commissioning
Separator Internals (CSE-SepInt) Achieving High Degree of Separation with CSE-SepInt
1) Vane Inlet Devices (CSE-SepVID)
2) Half Open Pipe (CSE-SepPID)
3) Cyclone Type (CSE-SepCID)
4) Diverter/Splash plate (CSE-SepDID)
Inlet Distributors(CSE-SepID)
1) Mesh Demister (CSE-SepMME)
2) Vane Demister (CSE-SepVME)
3) Cyclone Type (CSE-SepCME)
Gas Outlet Demisting Devices (CSE-SepME)
1) Mesh Pads (CSE-SepCMsP)
2) Matrix Type (CSE-SepCMxP)
3) Corrugated Plate (CSE-SepCCrP)
4) Plate Type (CSE-SepCPlP)
Coalescer Packs (CSE-SepCPack)
1) Perforated Baffles (CSE-SepPB)
2) Sand Jets (CSE-SepSJ)
3) Vortex Breakers (CSE-SepVB)
4) Weirs Plates (CSE-SepWP)
Common Internals (CSE-SepCINT)
www.chemsept.in │ [email protected] │ +91-9763-36-4744
ChemSepT™ Engineering Pvt. Ltd
Registered Office: 101, Manish Plaza, NIBM Road, Kondhawa Khurd, Pune, India, PIN-411048
Your Partner For Complete Turnkey Solutions
Project│Design│Manufacturing│Procurement│Service│Commissioning