oil states skagit smatco skagit winch...
TRANSCRIPT
One Source... Diversified Solutions.
Hoisting Performance
• 40,000 lbs (19.9 MT) to top layer
staLL Line PULL
• 200,000 lbs (90.7 MT) at 1st layer
caPacitY
• 1.5-in (38 mm) rope: 4,100 ft (1,249 m)• 1.25-in (32 mm) rope: 6,100 ft (1,859 m)
engine & transmission
• 152 HP (113 kW) diesel engine• 3-speeds Forward / Reverse Power Shift Transmission• Optional Hydraulic Transmission or Electric Shift Drive
DrUm siZe
• 20-in (508 mm) Barrel Diameter• 66-in (1,676 mm) Flange Diameter• 38-in (965 mm) Between Flanges
DrUm cLUtcH
• Internal, Expanding Friction Clutch • Air Actuated / Spring Released
DrUm BanD BraKe
• 250,000 lbs (113 MT) Static 1st Layer Holding Capacity• Spring Set / Air Released
DrUm PaWL
• 220,000 lbs (100 MT) 1st Layer Holding Capacity• Air Operated
WeigHt & Dimensions
• 40,000 lbs (18,144 kg)• Length X Height X Width 199-in 109-in 114-in(5,055 mm) (2,769 mm) (2,896 mm)
oPtionaL eQUiPment
Upper Drum Levelwind• Diamond Screw Driven• Bolt-on Design• 15 degree Maximum Fleet Angle• Approximate Weight: 6,000 lbs. (2,722 kg)
Double Drum Levelwind• Stand-Alone• Hydraulic Cylinder Driven• 15 degree Maximum Fleet Angle• Approximate Weight: 10,000 lbs. (4,536 kg)
Fleeting Sheaves• Keeps rope near to deck• Allows cable to fleet out the front and rear of winch• Approximate Weight: 2,000 lbs. (907 kg)
Skagit® Heavy-Duty Winch
Oil States Skagit SMATCO
Skagit® WINCH TECHNOLOGY
model rB-90-fc
new Design... same reliability!
Double Drum “Waterfall” configuration
www.oilstates.com
O I L S TAT E S I N D U S T R I E S , I N C .
©2010 Oil States Industries, Inc.07-SS-RB90FC SS0910 50
tHeoreticaL HaUL in PerformanceSingle Drum Operation (shown for 1.5 inch (38 mm) rope) / 20 inch drum (508 mm)
OIL STATES SKAGIT SMATCOMANUFACTURING, SALES & SERVICE1180 Mulberry RoadHouma, Louisiana 70363 USATEL: (985) 868 0630 FAX: (985) 868 9733Email: [email protected]
SALES OFFICE1155 Dairy Ashford, Ste. 700Houston, Texas 77079 USATEL: (713) 510 2200 FAX: (713) 510 2307Email: [email protected]
SMATCO® Heavy-Duty Winchmodel rB-90-fc
First Layer
Mid Drum(8th Layer)
Full Drum(16th Layer
127 (57.6)
67 (30.4)
44 (19.9)
LAYER LINE PULLKIPS (MT)
20 (6.1)
38 (11.6)
59 (17.9)
LINE SPEEDFPM (MPM)
46 (20.9)
24 (10.9)
16 (7.3)
LINE PULLKIPS (MT)
56 (17.1)
105 (32.0)
162 (49.4)
LINE SPEEDFPM (MPM)
16 (7.3)
8 (3.6)
5 (2.3)
LINE PULLKIPS (MT)
162 (49.4)
305 (92.9)
469 (143)
LINE SPEEDFPM (MPM)
1st GEAR 2nd GEAR 3rd GEAR
1
A
234567
B
C
D
8
A
B
C
D
2345678 1
199.00[5055]
109.
94[2
793]
114.25[2902]
82.00[2083]
189.00[4801]
38.00[965]DRUM WIDTH
45.7
5[1
162]
71.8
1[1
824]
50.8
1[1
291]
64.1
9[1
630]
20.00[508]
Ø
BARREL
66.00[1676]
Ø
FLANGE
6.00[152]
Note: Triple Drum and Reverse Waterfall configurations are available on request.