okolab · 2019. 4. 9. · • trimmed 24mm diameter circular observation opening for imaging in the...
TRANSCRIPT
www.oko-lab.com
OKOLABIVF CATALOG
OKOLABIVF
IVF catalog.indb 1 21/06/2018 13:19:30
IVF catalog.indb 2 21/06/2018 13:19:47
Warm plates for Nikon ....................................page 8
Temperature controllers ..................................page 4
Warm plates for Olympus .................................page 16
Leo portable meter ........................................page 30
Warm plates for Leica .....................................page 22
Warm plates for Zeiss .....................................page 26
Table of Content
Tri-Gas mixer ...............................................page 34
Gas Controllers for cell culture incubators ............page 36
IVF catalog.indb 3 21/06/2018 13:19:47
4
Temperature Controllers
H401-T-CONTROLLER
H401-T-CONTROLLER is a 2-channel controller which can be employed to control up to two devices at the same time.The devices are connected to the controller with fast connectors and can be easily replaced.The controller is equipped with a 4.3’’ Touch Screen and an intuitive software to off er accuracy and simplicity of useat the same time.The external sensor allows to automatically and independently calibrate the devices by performing the self calibration routine.A password protected procedure allows to calibrate the controller and the sensors for periodic maintenance.The controller is equipped with local memory for on-board data logging and storage of calibration and alarms events.
The GLASS PLATE can be automatically calibrated by employing the external temperature sensor of the con-troller an by starting the self calibration routine from the touch screen.The algorithm will progressively increase the tempera-ture of the plate until the desired set point temperature is reached inside the calibration Petri.
• H401-T-CONTROLLER can control up to 2 devices• Set point value from room temperature to 60°C• T - accuracy on specimen: ± 0.3°C, after self calibration routine• Intuitive 4.3’’Touch Screen Display• External k-type thermocouple for self calibration• Independent calibration of the devices connected• Start up protocol with tunable heating rate (°C/min)• On-board Data Logging / Download via mini-USB• Alarm buzzer and External Alarm Connector• Password protected procedure for periodic calibration against certifi ed thermometer• Dimensions: 103x130x59 mm
GLASS PLATE CALIBRATION
FEATURES
IVF catalog.indb 4 21/06/2018 13:19:47
5
Temperature Controllers
T-Controller.Controls up to two devices
T-sensor for auto-matic plate cali-bration
H401-Glass Table
On board memory for Data Logging with USB option
T-PAD + Glass Plate
FEATURRESH401-T-CONTROLLER can be connected to any of these devices (maximum two devices can be controlled at the same time): • H601 GLASS PLATES series• H401 GLASS PLATES series• H401 METAL PLATES series• H401 GLASS TABLE • H401 T PAD series• H401 STAGE T PAD (clamp on stage
T-PAD)• OBJECTIVE HEATER
IVF catalog.indb 5 21/06/2018 13:19:48
6
Temperature Controller
H401-T-PENNY
H401-T-PENNY is a compact single-channel Temperature Controller compatible with OKOLAB single-channel metal and glass heated plates and heated objective collars.
H401-T-PENNY combines performance and simplicity at an aff ordable price.
FEATURES• Temperature range: from ambient to 60°C• T - accuracy on specimen: ± 0.3°C• Single Channel• One-Point Temperature Calibration and Adjustment• Dim.: 84x45x20 mm• Weight: 47.5 g
Penny+ Glass Table
Penny+T Glass Plate
Penny+T PAD
IVF catalog.indb 6 21/06/2018 13:19:50
7
NOTES
IVF catalog.indb 7 21/06/2018 13:19:51
8
02
Warm ITO glass plate for Nikon stage T/TI-SR and TI-SP - Flat - 108 mm diameter - Heated Glass and Frame
Features:• ITO (Iridium Tin Oxide) coated glass plate fi ts in the circu-
lar opening of the XY stage and creates a fl at temperature controlled surface, fl ush with the rest of the XY stage.
• Dragontrail®: Chemically strengthened, scratch resistant, glass.• Heated aluminum frame: Provides the highest tempera-
ture uniformity by warming up both, the ITO coated glass and the surrounding aluminum circular case.
• Glass thickness 0.5 mm• Plate diameter 108mm
Requires one of the following controllers: • H401-T-CONTROLLER (one channel controls the glass and the oth-
er channel controls the aluminum case) – suggested controller.
ø107
.95
64.6
64.6
H601-NIIKON-TI-SSR-GLASS//FRAME
T/TI
-SR
and
TI-S
PT/
TI-S
R an
d TI
-SP
Warm ITO glass plate for Nikon stage T/TI-SR and TI-SP - Flat - 108 mm diameter
Features:• ITO (Iridium Tin Oxide) coated glass plate. Fits in the circu-
lar opening of the XY stage and creates a fl at temperature controlled surface, fl ush with the rest of the XY stage.
• Dragontrail®: Chemically strengthened, scratch resistant, glass.
• Glass thickness 0.5 mm• Plate diameter 108mm
Requires one of the following controllers: • H401-T-CONTROLLER• H401-T-PENNY
ø107
.95
64.6
64.6
H6001-NIKON-TI-SR-GLLASS
T/TI
-SR
and
TI-S
PT/
TI-S
R an
d TI
-SP
Warm metal plate for Nikon stage T/TI-SR and TI-SP with circular opening - Flat - 108 mm diameter
Features:• Fits in the circular opening of the XY stage and creates a
fl at temperature controlled surface, fl ush with the rest of the XY stage
• Trimmed 24 mm diameter circular observation opening for imaging
• Compatible with oil immersion lenses• Plate diameter 108mm
Requires one of the following controllers: • H401-T-CONTROLLER • H401-PENNY
ø107
.95
ø24
20
H4011-NIKON--TI-SR-MMETAL
T/TI
-SR
and
TI-S
PT/
TI-S
R an
d TI
-SP
H4011-NIKONN-TI-SR-TT--PADHeated Flat Plate for Nikon stage T/TI-SR
with circular openingFeatures:
• The plate clumps on the stage and provides a heated fl at surface throughout the entire surface of the stage
• Does not cover the circular opening• Compatible with H401-NIKON-TI-SR-METAL and H601-
NIKON-TI-SR-GLASS• Rises the focal of the XY stage by: 2.5 mm• Flat surface throughout the stage• Compatible with glass and metal heating inserts
Requires one of the following controllers: • H401-T-CONTROLLER. Required controller when in combi-
nation with H401-NIKON-TI-SR-METAL or H601-NIKON-TI-SR-GLASS
• H401-PENNY
T/TI
-SR
and
TI-S
PT/
TI-S
R an
d TI
-SP
230
323
9,20
ø230
3,50
Nikon - Inverted
IVF catalog.indb 8 21/06/2018 13:19:51
9
H401-NIKON--TS2R-MEETALWarm metal plate for Nikon stages TC-S-SR,
TC-S-SRF and TS2-S-SM Features:
• This metal plate fi ts in the opening of the XY stage and creates a fl at temperature controlled surface at the same height as the rest of the XY stage
• Trimmed 24 mm diameter circular observation opening for imaging
• Compatible with oil immersion lensesRequires one of the following controllers:
• H401-T-CONTROLLER • H401-PENNY
TC-S
-SR,
TC-
S-SR
F TC
-S-S
R, T
C-S-
SRF
and
TS2-
S-SM
and
TS2-
S-SM
H6011-NIKONN-TS2R-GLLASSWarm ITO glass plate for Nikon stages TC-S-SR, TC-S-SRF
and TS2-S-SM Features:
• ITO (Iridium Tin Oxide) coated glass plate. Fits in the opening of the XY stage and creates a fl at temperature controlled surface, fl ush with the rest of the XY stage Alu-minium frame for superior resistance and fl atness
• Dragontrail®: Chemically strengthened, scratch resistant, glass.
• Aluminium frame for superior resistance and fl atness• Glass thickness 0.5 mm
Requires one of the following controllers: • H401-T-CONTROLLER • H401-T-PENNY
TC-S
-SR,
TC-
S-SR
F TC
-S-S
R, T
C-S-
SRF
and
TS2-
S-SM
and
TS2-
S-SM
62 85,4
100,40127,65
100,
68
85,8
5
ø24
H601-NNIKON-TS22R-METALL/GLASSWarm metal and ITO glass plate
for Nikon stage TS2(R) Features:
• Fits in the opening of the TS2(R) stage and creates a fl at temperature controlled surface
• Dragontrail®: Chemically strengthened, scratch resistant, glass.
• Trimmed 24mm diameter circular observation opening for imaging in the metal side of the plate
• Compatible with oil immersion lenses• Metal and glass sides have independent temperature con-
trolRequires one of the following controllers:
• H401-T-CONTROLLER (one channel controls the glass side and the other channel controls the aluminum side)
68
6.630
ø2464
Ecpl
ipse
wit
h N
I-S-
EEc
plip
se w
ith
NI-
S-E 128.86
85.8
5
H4011-NIKONN-TS2R-T--PADHeated Flat Plate
for Nikon stage TS2(R)
Features:• The plate clumps on the Nikon stages TC-S-SR, TC-S-SRF
and TS2-S-SM and provides uniform heating throughout the entire surface of the stage
• Does not cover the TS2R opening• Compatible with H601-NIKON-TS2R-GLASS and H401-
NIKON-TS2R-METAL• This plate rises the focal of the XY stage by: 5 mm• Flat surface throughout the stage• Compatible with glass and metal heating inserts
Requires one of the following controllers: • H401-T-CONTROLLER. Required controller when in com-
bination with H401-NIKON-TS2R-METAL or H601-NIKON-TS2R-GLASS
• H401-PENNY
TC-S
-SR,
TC-
S-SR
F TC
-S-S
R, T
C-S-
SRF
and
TS2-
S-SM
and
TS2-
S-SM
Nikon - Inverted
IVF catalog.indb 9 21/06/2018 13:19:52
10
H601-PRRIOR H1177-GLASS-REECESSEDWarm ITO glass plate for Prior H117 stage
Features:• Compatible with Prior H117 stage• ITO (Iridium Tin Oxide) coated glass plate. Fits in the
opening of the XY stage and creates a surface recessed by 8.5 mm with respect to the rest of the XY stage rising the focal plane by 1.5 mm
• Dragontrail®: Chemically strengthened, scratch resistant, glass
• Aluminium frame for superior resistance and fl atness• Glass thickness 0.5 mm
Requires one of the following controllers: • H401-T-CONTROLLER • H401-T-PENNY
K-Fr
ame
K-Fr
ame
H601-KK-FRAME-ME TALL/GLASSSWarm metal and ITO glass plate for Marzhauser (all models), Ludl (all
models), ASI (all models, including z-piezo), Prior H107 and H117
Features:• Compatible with the following XY stages: Marzhauser (all
models), Ludl (all models), ASI (all models, including z-pi-ezo), Prior H107 and H117
• Fits in the opening of the XY stage and creates a fl at tem-perature controlled surface rising the focal plane by 7.5 mm (10 mm for Prior H117)
• Glass thickness 0.5 mm• Dragontrail®: Chemically strengthened, scratch resistant,
glass• Trimmed 24 mm diameter circular observation opening for
imaging • Compatible with oil immersion lenses• Metal and glass sides have independet temperture sensors
for independent temperature control of each sideRequires one of the following controllers:
• H401-T-CONTROLLER (one controller controls the glass the other controls the aluminium)
• H401-T-PENNY
/W tt ll dd ITOO l ll t f MM hhhh (( ll ddd l ))) L dl ((( ll
03.2
109.
7
159.7
99.6
67.2
K-Fr
ame
K-Fr
ame
H601-KK-FRAMEE -GLASSS-FLATWarm ITO glass plate for Marzhauser (all models), Ludl (all mod-
els), ASI (all models, including z-piezo), Prior H107 and H117Features:
• Compatible with the following XY stages: Marzhauser (all models), Ludl (all models), ASI (all models, including z-pi-ezo), Prior H107 and H117
• ITO (Iridium Tin Oxide) coated glass plate. Fits in the opening of the XY stage and creates a fl at temperature controlled surface rising the focal plane by 7.5 mm (10 mm for Prior H117)
• Dragontrail®: Chemically strengthened, scratch resistant, glass.
• Aluminium frame for superior resistance and fl atness• Glass thickness 0.5 mm
Requires one of the following controllers: • H401-T-CONTROLLER • H401-T-PENNY
K-Fr
ame
K-Fr
ame
109.
7
3.20
159.7
133.6
99.6
02.8
109.
5
85
159.5
110
H601--K-FRAME-GGLASS-RECEESSEDWarm metal plate for Marzhauser (all models), Ludl (all models),
ASI (all models, including z-piezo), Prior H107Features:
• Compatible with the following XY stages: Marzhauser (all models), Ludl (all models), ASI (all models, including z-pi-ezo), Prior H107
• ITO (Iridium Tin Oxide) coated glass plate. Fits in the opening of the XY stage and creates a surface recessed by 6 mm with respect to the rest of the XY stage rising the focal plane by 1.5 mm
• Dragontrail®: Chemically strengthened, scratch resistant, glass
• Aluminium frame for superior resistance and fl atness• Glass thickness 0.5 mm
Requires one of the following controllers: • H401-T-CONTROLLER • H401-T-PENNY
ll l ffff hh ll ddd l ddl llll d lll
02.8
109.
5
86.1
159.5
110.6
K-Fr
ame
K-Fr
ame
Nikon - K-Frame opening
IVF catalog.indb 10 21/06/2018 13:19:52
11
H401-KK-FRAME-MMETAL-RECCESSEDWarm metal plate for Marzhauser (all models), Ludl (all models),
ASI (all models, including z-piezo), Prior H107Features:
• Compatible with the following XY stages: Marzhauser (all models), Ludl (all models), ASI (all models, including z-pi-ezo), Prior H107
• Fits in the opening of the XY stage and creates a temper-ature controlled surface recessed with resepct to the rest of the stage to maintain the original focal plane of the XY stage
• Trimmed 24 mm diameter circular observation opening for imaging
• Compatible with oil immersion lensesRequires one of the following controllers:
• H401-T-CONTROLLER • H401-PENNY
04.5
109.
7
159.7
K-Fr
ame
K-Fr
ame
H401-KK-FRAMEE-METALL-FLATWarm metal plate for Marzhauser (all models), Ludl (all models),
ASI (all models, including z-piezo), Prior H107 and H117Features:
• Compatible with the following XY stages: Marzhauser (all models), Ludl (all models), ASI (all models, including z-pi-ezo), Prior H107 and H117
• Fits in the opening of the XY stage and creates a fl at tem-perature controlled surface at the same height of the rest of the XY stage
• Trimmed 24 mm diameter circular observation opening for imaging
• Compatible with oil immersion lensesRequires one of the following controllers:
• H401-T-CONTROLLER • H401-PENNY
K-Fr
ame
K-Fr
ame
109.
7
30
159.7
H401-PRRIOR H117-METAL-RRECESSEDWarm metal plate
for Prior H117 stageFeatures:
• Compatible with Prior H117 stage• Fits in the opening of the XY stage and creates a temper-
ature controlled surface recessed with resepct to the rest of the stage to maintain the original focal plane of the XY stage
• Trimmed 24 mm diameter circular observation opening for imaging
• Compatible with oil immersion lensesRequires one of the following controllers:
• H401-T-CONTROLLER • H401-PENNY
04.5
109.
7
159.7
K-Fr
ame
K-Fr
ame
H401--NIKON-NI-S-E-MMETALWarm metal plate for Nikon upright microscope Ecplipse with
NI-S-E-motorized stageFeatures:
• Fits in the insert of the NI-S-E-motorized stage and creates a fl at temperature controlled surface
• Features a trimmed 27 mm diameter circular observation opening for imaging
Requires one of the following controllers: • H401-T-CONTROLLER • H401-PENNY
F
105.
9
20
4.5ø27
191.4
Ecpl
ipse
wit
h N
I-S-
EEc
plip
se w
ith
NI-
S-E
Nikon - K-Frame opening
IVF catalog.indb 11 21/06/2018 13:19:54
12
HH401-UPP-METALLWarm metal plate for upright microscopes with glass slide traslators Features:
• Compatible with all the upright microscopes equippend with glass slide traslators
• Creates a heated surface under the glass slide transalator• Features a 40x15 mm rectangular opening for imaging
Requires one of the following controllers: • H401-T-CONTROLLER • H401-PENNY
120.
502
120
UPR
IGH
TU
PRIG
HT
H401-NNIKON-SMZ-180--GLASSWarm ITO glass plate for Nikon stereo microscope SMZ
Features:• Compatible with the following stereo microscope series:
Nikon SMZ• ITO (Iridium Tin Oxide) coated glass plate. Fits in the cir-
cular 180 mm opening of the stereo microscope and cre-ates a fl at warm surface
• Aluminium frame for superior resistance and fl atness• Glass thickness 2 mm. Plate diameter 180mm
Requires one of the following controllers: • H401-T-CONTROLLER • H401-PENNY
ø179
.8
80
08
128
SMZ
SMZ
H401--NIKON-TTI-S-ER-MMETALWarm metal plate for Nikon stages TI-S-E, TI-S-ER, TI2-S-SE-E
and TI2-S-SS-EFeatures:
• Compatible with the following XY stages: Nikon TI-S-E, TI-S-ER, TI2-S-SE-E and TI2-S-SS-E
• Fits in the opening of the XY stage and creates a temper-ature controlled surface recessed with respect to the rest of the stage to maintain the original focal plane of the XY stage
• Trimmed 24 mm diameter circular observation opening for imaging
• Compatible with oil immersion lensesRequires one of the following controllers:
• H401-T-CONTROLLER • H401-PENNY
04.9
3
155
236
ø24
TI-S
-E,
TI-S
-ER,
TI2
-S-S
E-E
TI-S
-E,
TI-S
-ER,
TI2
-S-S
E-E
and
TI2-
S-SS
-Ean
d TI
2-S-
SS-E
H401-NIKON-TTI-SAM-MMETALWarm metal plate for Nikon TI-SAM, T-SAM, TI-SM attachable
mechanical stageFeatures:
• Compatible with the following XY stages: Nikon T/TI-SP+T/TI-SAM and TI-SM
• Fits in XY stage and creates a temperature controlled surface recessed with respect to the rest of the stage to maintain the original focal plane of the XY stage
• Trimmed 24 mm diameter circular observation opening for imaging
• Compatible with oil immersion lensesRequires one of the following controllers:
• H401-T-CONTROLLER • H401-PENNY
04.9
1.65
127.
5
22
ø24
242TI-S
-E,
TI-S
-ER,
TI2
-S-S
E-E
TI-S
-E,
TI-S
-ER,
TI2
-S-S
E-E
and
TI2-
S-SS
-Ean
d TI
2-S-
SS-E
Nikon - other stages
IVF catalog.indb 12 21/06/2018 13:19:54
13
238.
8
06
H401--NIKON-SSMZ25-GGLASSWarm ITO glass plate
for Nikon stereo microscope SMZFeatures:
• Compatible with the following stereo microscope’s stand: P2-PB, P2-DBC, P2-DBF, P-PS32, P-DSL32 and P-DSF32
• ITO (Iridium Tin Oxide) coated glass. Covers the entire stand and creates a fl at heated surface
• Aluminium frame for superior resistance and fl atness• Glass thickness 1 mm
Requires one of the following controllers: • H401-T-CONTROLLER • H401-PENNY
218.3
P2-P
B, P
2-DB
C, P
2-DB
F,
P2-P
B, P
2-DB
C, P
2-DB
F,
P-PS
32,
P-DS
L32
and
P-PS
32,
P-DS
L32
and
P-DS
F32
P-DS
F32
246.2
252.
7
06
H401--NIKON-SMZSL-GGLASSWarm ITO glass plate
for Nikon stereo microscope SMZ 1500/1000/800
Features:• Compatible with the following stereo microscope’s stand:
C-DSD, C-DSS, C-BD• ITO (Iridium Tin Oxide) coated glass plate. Covers the en-
tire stand and creates a fl at heated surface• Aluminium frame for superior resistance and fl atness• Glass thickness 1 mm
Requires one of the following controllers: • H401-T-CONTROLLER • H401-PENNY
C-DS
D, C
-DSS
, C-
BDC-
DSD,
C-D
SS,
C-BD
H401--NIKON--SMZSS-GGLASSWarm ITO glass plate for Nikon stereo microscope SMZ 1500/1000/800
Features:• Compatible with the following stereo microscope stand:
C-DS, C-PS• ITO (Iridium Tin Oxide) coated glass plate. Covers the en-
tire stand and creates a fl at warm surface• Aluminium frame for superior resistance and fl atness• Glass thickness 1 mm
Requires one of the following controllers: • H401-T-CONTROLLER • H401-PENNY
C-DS
, C-
PSC-
DS,
C-PS
130,
40
229
146,40200
0
106
Nikon - Stereo
IVF catalog.indb 13 21/06/2018 13:19:55
14
H401-NIKON-SMZZSS-GLASS//METALLarge metal heating plate with central heating glass for Nikon
stereo microscope SMZ 1500/1000/800Features:
• Compatible with the following stereo microscope’s stand: C-DS, C-PS
• Large fl at heating surface covering the entire stereo mi-croscope stand
• Metal and glass surfaces can be independently heated to diff erent temperatures
• Glass thickness: 1 mmRequires one of the following controllers:
• H401-T-CONTROLLER uses both channels
/145
320
SMZ
1500
/100
0/80
0SM
Z 15
00/1
000/
800
130
8
550
H401-NIKON-SMZZSL-GLASS//METALLarge metal heating plate with central heating glass for Nikon
stereo microscope SMZ 1500/1000/800Features:
• Compatible with the following stereo microscope’s stand: C-DSD, C-DSS, C-BD
• Large fl at heating surface covering the entire stereo mi-croscope stand
• Metal and glass surfaces can be independently heated to diff erent temperatures
• Glass thickness: 1 mmRequires one of the following controllers:
• H401-T-CONTROLLER uses both channels
/145
320
SMZ
1500
/100
0/80
0SM
Z 15
00/1
000/
800
130
8
550
H401-NIKON-SMZZ25-GLASS//METALLarge metal heating plate with central heating glass Nikon for
stereo microscope SMZFeatures:
• Compatible with the following stereo microscope’s stand: P2-PB, P2-DBC, P2-DBF, P-PS32, P-DSL32 and P-DSF32
• Large fl at heating surface covering the entire stereo mi-croscope stand
• Metal and glass surfaces can be independently heated to diff erent temperatures
• Glass thickness: 1 mmRequires one of the following controllers:
• H401-T-CONTROLLER uses both channels
/145
320SM
ZSM
Z
130
8
550
H4401-GLAASS-TABLLEHeated Flat Glass Table
- (440x235 mm)Features:
• Can be positioned on any surface (Table Top, Cabinet work surface, etc) to create a temperature controlled area
• Temperature range: 27°C - 45°CRequires one of the following controllers:
• H401-T-CONTROLLER • H401-PENNY
235
440
81 -
111
STER
EOST
EREO
Nikon - Stereo
IVF catalog.indb 14 21/06/2018 13:19:55
15
H4401-T-PAAD-SMALLLHeated Flat Metal Plate
(174x234 mm)Features:
• Can be positioned on any surface (Table Top, Cabinet work surface, etc) to create a temperature controlled area
• Temperature range: 27°C - 45°CRequires one of the following controllers:
• H401-T-CONTROLLER • H401-PENNY
H t dd FFl t M tt l PPl ttt(( ))
234
174
11.30
PAD
PAD
H4401-T-PAAD-LARGGEHeated Flat Metal Plate -
size A3 (420x300 mm)Features:
• Can be positioned on any surface (Table Top, Cabinet work surface, etc) to create a temperature controlled area
• Temperature range: 27°C - 45°CRequires one of the following controllers:
• H401-T-CONTROLLER • H401-PENNY
420
300
11.30
PAD
PAD
H401-T-PADD-MEDIUUMHeated Flat Metal Plate - size A4 (297x210 mm)
Features:• Can be positioned on any surface (Table Top, Cabinet work
surface, etc) to create a temperature controlled area• Temperature range: 27°C - 45°C
Requires one of the following controllers: • H401-T-CONTROLLER • H401-PENNY
297
210
11.30
PAD
PAD
Nikon - T-Pads
IVF catalog.indb 15 21/06/2018 13:19:55
16
Warm metal plate for Olympus stages with circular openingFlat - 110 mm diameter
Features:• Fits in the circular opening of the XY stage and creates a
fl at temperature controlled surface, fl ush with the rest of the XY stage
• Trimmed 24 mm diameter circular observation opening for imaging
• Compatible with oil immersion lenses• Plate diameter 108mm
Requires one of the following controllers: • H401-T-CONTROLLER • H401-PENNY
ø109
.95
20
H401-OOLYMPUS--IX-SUSP-MMETAL
IX-S
USP
, G
X-SV
R, G
X-SF
R,
IX-S
USP
, G
X-SV
R, G
X-SF
R,
BX3-
SSU
, IX
2-SF
R, IX
2-SV
L-2
BX3-
SSU
, IX
2-SF
R, IX
2-SV
L-2
Warm ITO glass plate for Olympus stages with circular openingFlat - 110 mm diameter - Heated Glass and frame
Features:• ITO (Iridium Tin Oxide) coated glass plate. Fits in the cir-
cular opening of the XY stage and creates a fl at tempera-ture controlled surface, fl ush with the rest of the XY stage
• Dragontrail®: Chemically strengthened, scratch resistant, glass.
• Heated aluminum frame: Provides the highest tempera-ture uniformity by warming up both, the ITO coated glass and the surrounding aluminum circular case.
• Glass thickness 0.5 mm• Plate diameter 110mm
Requires one of the following controllers: • H401-T-CONTROLLER (one channel controls the glass and
the other channel controls the aluminum case) - suggested controller.
ø109
.95
0
2
64.6
H601-OLYYMPUS-IX-SSUSP-GLASSS/FRAME
IX-S
USP
, G
X-SV
R, G
X-SF
R, B
X3-S
SU,
IX-S
USP
, G
X-SV
R, G
X-SF
R, B
X3-S
SU,
IX2-
SFR,
IX2-
SVL-
2IX
2-SF
R, IX
2-SV
L-2
64.6
Warm ITO glass plate for Olympus stages with circular openingFlat - 110 mm diameter
Features:• ITO (Iridium Tin Oxide) coated glass plate. Fits in the cir-
cular opening of the XY stage and creates a fl at tempera-ture controlled surface, fl ush with the rest of the XY stage
• Dragontrail®: Chemically strengthened, scratch resistant, glass.
• Glass thickness 0.5 mm• Plate diameter 110mm
Requires one of the following controllers: • H401-T-CONTROLLER• H401-T-PENNY
ø109
.95
02
64.6
H601--OLYMPUSS-IX-SUSP-GGLASS
IX-S
USP
, G
X-SV
R, G
X-SF
R,
IX-S
USP
, G
X-SV
R, G
X-SF
R,
BX3-
SSU
, IX
2-SF
R, IX
2-SV
L-2
BX3-
SSU
, IX
2-SF
R, IX
2-SV
L-2
64.6
Heated Flat Plate for GX-SFR and IX2-SFR Olympus stages with
circular openingFeatures:
• The plate clumps on the stage and provides a heated fl at surface throughout the entire surface of the stage
• Does not cover the circular opening• Compatible with GX-SFR and IX2-SFR Olympus stages and
IX2-SFR Olympus• Rises the focal of the XY stage by: 2.5 mm• Flat surface throughout the stage• Compatible with H401-OLYMPUS-IX-SUSP-METAL and H601-
OLYMPUS-IX-SUPS-GLASSRequires one of the following controllers:
• H401-T-CONTROLLER. Required controller when in com-bination with H401-OLYMPUS-IX-SUSP-METAL or H601-OLYMPUS-IX-SUSP-GASS
• H401-PENNY
T/TI
-SR
and
TI-S
PT/
TI-S
R an
d TI
-SP
92.5
0
203
ø110
273
Olympus - Inverted and Upright
IVF catalog.indb 16 21/06/2018 13:19:56
17
H601-PRRIOR H1177-GLASS-REECESSEDWarm ITO glass plate for Prior H117 stage
Features:• Compatible with Prior H117 stage• ITO (Iridium Tin Oxide) coated glass plate. Fits in the
opening of the XY stage and creates a surface recessed by 8.5 mm with respect to the rest of the XY stage rising the focal plane by 1.5 mm
• Dragontrail®: Chemically strengthened, scratch resistant, glass
• Aluminium frame for superior resistance and fl atness• Glass thickness 0.5 mm
Requires one of the following controllers: • H401-T-CONTROLLER • H401-T-PENNY
K-Fr
ame
K-Fr
ame
H601-KK-FRAMEE-METAL/GLASSWarm metal and ITO glass plate for Marzhauser (all models), Ludl (all
models), ASI (all models, including z-piezo), Prior H107 and H117
Features:• Compatible with the following XY stages: Marzhauser (all
models), Ludl (all models), ASI (all models, including z-pi-ezo), Prior H107 and H117
• Fits in the opening of the XY stage and creates a fl at tem-perature controlled surface rising the focal plane by 7.5 mm (10 mm for Prior H117)
• Glass thickness 0.5 mm• Dragontrail®: Chemically strengthened, scratch resistant,
glass• Trimmed 24 mm diameter circular observation opening for
imaging • Compatible with oil immersion lenses• Metal and glass sides have independet temperture sensors
for independent temperature control of each sideRequires one of the following controllers:
• H401-T-CONTROLLER (one controller controls the glass the other controls the aluminium)
• H401-T-PENNY
/W tt ll dd ITOO l ll t f MM hhhh (( ll ddd ll ))) L dl ((( ll
03.2
109.
7
159.7
99.6
67.2
K-Fr
ame
K-Fr
ame
H601-K-FRAME-GLASSS-FLATWarm ITO glass plate for Marzhauser (all models), Ludl (all mod-
els), ASI (all models, including z-piezo), Prior H107 and H117Features:
• Compatible with the following XY stages: Marzhauser (all models), Ludl (all models), ASI (all models, including z-pi-ezo), Prior H107 and H117
• ITO (Iridium Tin Oxide) coated glass plate. Fits in the opening of the XY stage and creates a fl at temperature controlled surface rising the focal plane by 7.5 mm (10 mm for Prior H117)
• Dragontrail®: Chemically strengthened, scratch resistant, glass.
• Aluminium frame for superior resistance and fl atness• Glass thickness 0.5 mm
Requires one of the following controllers: • H401-T-CONTROLLER • H401-T-PENNY
K-Fr
ame
K-Fr
ame
109.
7
3.20
159.7
133.6
99.6
02.8
109.
5
85
159.5
110
H601-K-FRAME-GGLASS-RECEESSEDWarm metal plate for Marzhauser (all models), Ludl (all models),
ASI (all models, including z-piezo), Prior H107Features:
• Compatible with the following XY stages: Marzhauser (all models), Ludl (all models), ASI (all models, including z-pi-ezo), Prior H107
• ITO (Iridium Tin Oxide) coated glass plate. Fits in the opening of the XY stage and creates a surface recessed by 6 mm with respect to the rest of the XY stage rising the focal plane by 1.5 mm
• Dragontrail®: Chemically strengthened, scratch resistant, glass
• Aluminium frame for superior resistance and fl atness• Glass thickness 0.5 mm
Requires one of the following controllers: • H401-T-CONTROLLER • H401-T-PENNY
ll l ffff hh ll ddd l ddl llll d lll
02.8
109.
5
86.1
159.5
110.6
K-Fr
ame
K-Fr
ame
Olympus - K-Frame opening
IVF catalog.indb 17 21/06/2018 13:19:56
18
H401-KK-FRAME-MMETAL-RECCESSEDWarm metal plate for Marzhauser (all models), Ludl (all models),
ASI (all models, including z-piezo), Prior H107Features:
• Compatible with the following XY stages: Marzhauser (all models), Ludl (all models), ASI (all models, including z-pi-ezo), Prior H107
• Fits in the opening of the XY stage and creates a temper-ature controlled surface recessed with resepct to the rest of the stage to maintain the original focal plane of the XY stage
• Trimmed 24 mm diameter circular observation opening for imaging
• Compatible with oil immersion lensesRequires one of the following controllers:
• H401-T-CONTROLLER • H401-PENNY
04.5
109.
7
159.7
K-Fr
ame
K-Fr
ame
H401-KK-FRAMEE-METALL-FLATWarm metal plate for Marzhauser (all models), Ludl (all models),
ASI (all models, including z-piezo), Prior H107 and H117Features:
• Compatible with the following XY stages: Marzhauser (all models), Ludl (all models), ASI (all models, including z-pi-ezo), Prior H107 and H117
• Fits in the opening of the XY stage and creates a fl at tem-perature controlled surface at the same height of the rest of the XY stage
• Trimmed 24 mm diameter circular observation opening for imaging
• Compatible with oil immersion lensesRequires one of the following controllers:
• H401-T-CONTROLLER • H401-PENNY
K-Fr
ame
K-Fr
ame
109.
7
30
159.7
H401-PRRIOR H117-METAL-RRECESSEDWarm metal plate for Prior H117 stage
Features:• Compatible with Prior H117 stage• Fits in the opening of the XY stage and creates a temper-
ature controlled surface recessed with resepct to the rest of the stage to maintain the original focal plane of the XY stage
• Trimmed 24 mm diameter circular observation opening for imaging
• Compatible with oil immersion lensesRequires one of the following controllers:
• H401-T-CONTROLLER • H401-PENNY
04.5
109.
7
159.7
K-Fr
ame
K-Fr
ame
HH401-UPP-METALLWarm metal plate for upright microscopes with glass slide traslators Features:
• Compatible with all the upright microscopes equipped with glass slide traslators
• Realizes a warm surface under the glass slide trasalator• Features a 40x15 mm rectangular opening for imaging
Requires one of the following controllers: • H401-T-CONTROLLER • H401-PENNY
120.
502
120
UPR
IGH
TU
PRIG
HT
Olympus - K-Frame opening
IVF catalog.indb 18 21/06/2018 13:19:57
19
Warm ITO glass plate for stereo microscope’s stand: SZX2-ILLT
Features:• Compatible with the following stereo microscope’s stand:
SZX2-ILLT• ITO (Iridium Tin Oxide) coated glass plate covers the en-
tire stand and creates a fl at warm surface• Aluminium frame for superior resistance and fl atness• Glass thickness 1 mm
Requires one of the following controllers: • H401-T-CONTROLLER • H401-PENNY
H401-OOLYMPUSS-SZX2B-GLASS
SZX2
-ILL
TSZ
X2-I
LLT
230
06
Warm ITO glass plate for stereo microscope’s stand: SZX2-ILLB, SZX2-ILLK, SZX2-ILLD
Features:• Compatible with the following stereo microscope’s stand:
SZX2-ILLB, SZX2-ILLK, SZX2-ILLD• ITO (Iridium Tin Oxide) coated glass plate covers the en-
tire stand and creates a fl at warm surface• Aluminium frame for superior resistance and fl atness• Glass thickness 1 mm
Requires one of the following controllers: • H401-T-CONTROLLER • H401-PENNY
224
06
H401-OOLYMPUSS-SZX2AA-GLASS
SZX2
-ILL
B, S
ZX2-
ILLK
, SZ
X2-I
LLB,
SZX
2-IL
LK,
SZX2
-ILL
DSZ
X2-I
LLD
234 225
H401-OLYYMPUS-SZXX2A-GLASS/METALLarge metal heating plate with central heating glass for Olympus
stereo microscope MVX and SZXFeatures:
• Compatible with the following stereo microscope’s stand: SZX2-ILLB, SZX2-ILLK, SZX2-ILLD
• Large fl at heating surface covering the entire stereo mi-croscope stand
• Metal and glass surfaces can be independently heated to diff erent temperatures
• Glass thickness: 1 mmRequires one of the following controllers:
• H401-T-CONTROLLER (uses both channels)
/145
320
SZX2
-ILL
B, S
ZX2-
ILLK
, SZ
X2-I
LLB,
SZX
2-IL
LK,
SZX2
-ILL
DSZ
X2-I
LLD
130
8
550
H401-OLYYMPUS-SZXX2B-GLASS/METALLarge metal heating plate with central heating glass for Olympus
stereo microscope MVX and SZXFeatures:
• Compatible with the following stereo microscope’s stand: SZX2-ILLT
• Large fl at heating surface covering the entire stereo mi-croscope stand
• Metal and glass surfaces can be independently heated to diff erent temperatures
• Glass thickness: 1 mmRequires one of the following controllers:
• H401-T-CONTROLLER (uses both channels)
/145
320
SZX2
-ILL
TSZ
X2-I
LLT
130
8
550
Olympus - Olympus Stereo
IVF catalog.indb 19 21/06/2018 13:19:58
20
H4401-GLAASS-TABLLEHeated Flat Glass Table
- (440x235 mm)Features:
• Can be positioned on any surface (Table Top, Cabinet work surface, etc) to create a temperature controlled area
• Temperature range: 27°C - 45°CRequires one of the following controllers:
• H401-T-CONTROLLER • H401-PENNY
235
440
81 -
111
STER
EOST
EREO
Olympus - Olympus Stereo
IVF catalog.indb 20 21/06/2018 13:19:58
21
H401-T-PADD-MEDIUUMHeated Flat Metal Plate - size A4 (297x210 mm)
Features:• Can be positioned on any surface (Table Top, Cabinet work
surface, etc) to create a temperature controlled area• Temperature range: 27°C - 45°C
Requires one of the following controllers: • H401-T-CONTROLLER • H401-PENNY
297
210
11.30
PAD
PAD
H4401-T-PAAD-LARGGEHeated Flat Metal Plate - size A3 (420x300 mm)
Features:• Can be positioned on any surface (Table Top, Cabinet work
surface, etc) to create a temperature controlled area• Temperature range: 27°C - 45°C
Requires one of the following controllers: • H401-T-CONTROLLER • H401-PENNY
420
300
11.30
PAD
PAD
H4401-T-PAAD-SMALLLHeated Flat Metal Plate - (174x234 mm)
Features:• Can be positioned on any surface (Table Top, Cabinet work
surface, etc) to create a temperature controlled area• Temperature range: 27°C - 45°C
Requires one of the following controllers: • H401-T-CONTROLLER • H401-PENNY
234
174
11.30
PAD
PAD
Olympus - T-Pads
IVF catalog.indb 21 21/06/2018 13:19:58
22
H601-PRRIOR H1177-GLASS-REECESSEDWarm ITO glass plate for Prior H117 stage
Features:• Compatible with Prior H117 stage• ITO (Iridium Tin Oxide) coated glass plate. Fits in the
opening of the XY stage and creates a surface recessed by 8.5 mm with respect to the rest of the XY stage rising the focal plane by 1.5 mm
• Dragontrail®: Chemically strengthened, scratch resistant, glass
• Aluminium frame for superior resistance and fl atness• Glass thickness 0.5 mm
Requires one of the following controllers: • H401-T-CONTROLLER • H401-T-PENNY
K-Fr
ame
K-Fr
ame
H601-KK-FRAMEE-METAL/GLASSWarm metal and ITO glass plate for Marzhauser (all models), Ludl (all
models), ASI (all models, including z-piezo), Prior H107 and H117
Features:• Compatible with the following XY stages: Marzhauser (all
models), Ludl (all models), ASI (all models, including z-pi-ezo), Prior H107 and H117
• Fits in the opening of the XY stage and creates a fl at tem-perature controlled surface rising the focal plane by 7.5 mm (10 mm for Prior H117)
• Glass thickness 0.5 mm• Dragontrail®: Chemically strengthened, scratch resistant,
glass• Trimmed 24 mm diameter circular observation opening for
imaging • Compatible with oil immersion lenses• Metal and glass sides have independet temperture sensors
for independent temperature control of each sideRequires one of the following controllers:
• H401-T-CONTROLLER (one controller controls the glass the other controls the aluminium)
• H401-T-PENNY
/W tt ll dd ITOO l ll t ff MM hhhh (( ll ddd ll ))) L dl ((( ll
03.2
109.
7
159.7
99.6
67.2
K-Fr
ame
K-Fr
ame
H601-K-FRAMME-GLASSS-FLATWarm ITO glass plate for Marzhauser (all models), Ludl (all mod-
els), ASI (all models, including z-piezo), Prior H107 and H117Features:
• Compatible with the following XY stages: Marzhauser (all models), Ludl (all models), ASI (all models, including z-pi-ezo), Prior H107 and H117
• ITO (Iridium Tin Oxide) coated glass plate. Fits in the opening of the XY stage and creates a fl at temperature controlled surface rising the focal plane by 7.5 mm (10 mm for Prior H117)
• Dragontrail®: Chemically strengthened, scratch resistant, glass.
• Aluminium frame for superior resistance and fl atness• Glass thickness 0.5 mm
Requires one of the following controllers: • H401-T-CONTROLLER • H401-T-PENNY
K-Fr
ame
K-Fr
ame
109.
7
3.20
159.7
133.6
99.6
02.8
109.
5
85
159.5
110
H601-K-FRAME-GGLASS-RECEESSEDWarm metal plate for Marzhauser (all models), Ludl (all models),
ASI (all models, including z-piezo), Prior H107Features:
• Compatible with the following XY stages: Marzhauser (all models), Ludl (all models), ASI (all models, including z-pi-ezo), Prior H107
• ITO (Iridium Tin Oxide) coated glass plate. Fits in the opening of the XY stage and creates a surface recessed by 6 mm with respect to the rest of the XY stage rising the focal plane by 1.5 mm
• Dragontrail®: Chemically strengthened, scratch resistant, glass
• Aluminium frame for superior resistance and fl atness• Glass thickness 0.5 mm
Requires one of the following controllers: • H401-T-CONTROLLER • H401-T-PENNY
l l ffff hh ll dd l ddl llll d lll
02.8
109.
5
86.1
159.5
110.6
K-Fr
ame
K-Fr
ame
Leica - K-Frame opening
IVF catalog.indb 22 21/06/2018 13:19:58
23
H401-KK-FRAME-MMETAL-RECCESSEDWarm metal plate for Marzhauser (all models), Ludl (all models),
ASI (all models, including z-piezo), Prior H107Features:
• Compatible with the following XY stages: Marzhauser (all models), Ludl (all models), ASI (all models, including z-pi-ezo), Prior H107
• Fits in the opening of the XY stage and creates a temper-ature controlled surface recessed with resepct to the rest of the stage to maintain the original focal plane of the XY stage
• Trimmed 24 mm diameter circular observation opening for imaging
• Compatible with oil immersion lensesRequires one of the following controllers:
• H401-T-CONTROLLER • H401-PENNY
04.5
109.
7
159.7
K-Fr
ame
K-Fr
ame
H401-KK-FRAMEE-METALL-FLATWarm metal plate for Marzhauser (all models), Ludl (all models),
ASI (all models, including z-piezo), Prior H107 and H117Features:
• Compatible with the following XY stages: Marzhauser (all models), Ludl (all models), ASI (all models, including z-pi-ezo), Prior H107 and H117
• Fits in the opening of the XY stage and creates a fl at tem-perature controlled surface at the same height of the rest of the XY stage
• Trimmed 24 mm diameter circular observation opening for imaging
• Compatible with oil immersion lensesRequires one of the following controllers:
• H401-T-CONTROLLER • H401-PENNY
K-Fr
ame
K-Fr
ame
109.
7
30
159.7
H401-PRRIOR H117-METAL-RRECESSEDWarm metal plate
for Prior H117 stageFeatures:
• Compatible with Prior H117 stage• Fits in the opening of the XY stage and creates a temper-
ature controlled surface recessed with resepct to the rest of the stage to maintain the original focal plane of the XY stage
• Trimmed 24 mm diameter circular observation opening for imaging
• Compatible with oil immersion lensesRequires one of the following controllers:
• H401-T-CONTROLLER • H401-PENNY
04.5
109.
7
159.7
K-Fr
ame
K-Fr
ame
Warm metal plate for Leica stages with circular openingFlat - 88 mm diameter
Features:• Fits in the circular opening of the XY stage and creates a
fl at temperature controlled surface, fl ush with the rest of the XY stage
• Trimmed 24 mm diameter circular observation opening for imaging
• Compatible with oil immersion lenses• Plate diameter 88 mm
Requires one of the following controllers: • H401-T-CONTROLLER • H401-PENNY
ø86,
85
H401-LEICA--R88-METTAL
2,10
Leica - K- Frame opening and R88
IVF catalog.indb 23 21/06/2018 13:19:59
24
H4401-GLAASS-TABLLEHeated Flat Glass Table
- (440x235 mm)Features:
• Can be positioned on any surface (Table Top, Cabinet work surface, etc) to create a temperature controlled area
• Temperature range: 27°C - 45°CRequires one of the following controllers:
• H401-T-CONTROLLER • H401-PENNY
235
440
81 -
111
STER
EOST
EREO
Leica - for Stereo
IVF catalog.indb 24 21/06/2018 13:20:00
25
H401-T-PADD-MEDIUUMHeated Flat Metal Plate - size A4 (297x210 mm)
Features:• Can be positioned on any surface (Table Top, Cabinet work
surface, etc) to create a temperature controlled area• Temperature range: 27°C - 45°C
Requires one of the following controllers: • H401-T-CONTROLLER • H401-PENNY
297
210
11.30
PAD
PAD
H4401-T-PAAD-LARGGEHeated Flat Metal Plate - size A3 (420x300 mm)
Features:• Can be positioned on any surface (Table Top, Cabinet work
surface, etc) to create a temperature controlled area• Temperature range: 27°C - 45°C
Requires one of the following controllers: • H401-T-CONTROLLER • H401-PENNY
420
300
11.30
PAD
PAD
H4401-T-PAAD-SMALLLHeated Flat Metal Plate - (174x234 mm)
Features:• Can be positioned on any surface (Table Top, Cabinet work
surface, etc) to create a temperature controlled area• Temperature range: 27°C - 45°C
Requires one of the following controllers: • H401-T-CONTROLLER • H401-PENNY
234
174
11.30
PAD
PAD
Leica - T-Pads
IVF catalog.indb 25 21/06/2018 13:20:00
26
H601-PRRIOR H1177-GLASS-REECESSEDWarm ITO glass plate for Prior H117 stage
Features:• Compatible with Prior H117 stage• ITO (Iridium Tin Oxide) coated glass plate. Fits in the
opening of the XY stage and creates a surface recessed by 8.5 mm with respect to the rest of the XY stage rising the focal plane by 1.5 mm
• Dragontrail®: Chemically strengthened, scratch resistant, glass
• Aluminium frame for superior resistance and fl atness• Glass thickness 0.5 mm
Requires one of the following controllers: • H401-T-CONTROLLER • H401-T-PENNY
K-Fr
ame
K-Fr
ame
H601-KK-FRAMEE-METAL/GLASSSWarm metal and ITO glass plate for Marzhauser (all models), Ludl (all
models), ASI (all models, including z-piezo), Prior H107 and H117
Features:• Compatible with the following XY stages: Marzhauser (all
models), Ludl (all models), ASI (all models, including z-pi-ezo), Prior H107 and H117
• Fits in the opening of the XY stage and creates a fl at tem-perature controlled surface rising the focal plane by 7.5 mm (10 mm for Prior H117)
• Glass thickness 0.5 mm• Dragontrail®: Chemically strengthened, scratch resistant,
glass• Trimmed 24 mm diameter circular observation opening for
imaging • Compatible with oil immersion lenses• Metal and glass sides have independet temperture sensors
for independent temperature control of each sideRequires one of the following controllers:
• H401-T-CONTROLLER (one controller controls the glass the other controls the aluminium)
• H401-T-PENNY
/W tt ll dd ITOO l ll t f MM hhhh (( ll ddd l ))) L dl ((( ll
03.2
109.
7
159.7
99.6
67.2
K-Fr
ame
K-Fr
ame
H601-K-FRAMME-GLASSS-FLATWarm ITO glass plate for Marzhauser (all models), Ludl (all mod-
els), ASI (all models, including z-piezo), Prior H107 and H117Features:
• Compatible with the following XY stages: Marzhauser (all models), Ludl (all models), ASI (all models, including z-pi-ezo), Prior H107 and H117
• ITO (Iridium Tin Oxide) coated glass plate. Fits in the opening of the XY stage and creates a fl at temperature controlled surface rising the focal plane by 7.5 mm (10 mm for Prior H117)
• Dragontrail®: Chemically strengthened, scratch resistant, glass.
• Aluminium frame for superior resistance and fl atness• Glass thickness 0.5 mm
Requires one of the following controllers: • H401-T-CONTROLLER • H401-T-PENNY
K-Fr
ame
K-Fr
ame
109.
7
3.20
159.7
133.6
99.6
02.8
109.
5
85
159.5
110
H601--K-FRAME-GGLASS-RECEESSEDWarm metal plate for Marzhauser (all models), Ludl (all models),
ASI (all models, including z-piezo), Prior H107Features:
• Compatible with the following XY stages: Marzhauser (all models), Ludl (all models), ASI (all models, including z-pi-ezo), Prior H107
• ITO (Iridium Tin Oxide) coated glass plate. Fits in the opening of the XY stage and creates a surface recessed by 6 mm with respect to the rest of the XY stage rising the focal plane by 1.5 mm
• Dragontrail®: Chemically strengthened, scratch resistant, glass
• Aluminium frame for superior resistance and fl atness• Glass thickness 0.5 mm
Requires one of the following controllers: • H401-T-CONTROLLER • H401-T-PENNY
ll l ffff hh ll ddd l ddl llll d lll
02.8
109.
5
86.1
159.5
110.6
K-Fr
ame
K-Fr
ame
Zeiss - K-Frame opening
IVF catalog.indb 26 21/06/2018 13:20:00
27
H401-KK-FRAME-MMETAL-RECCESSEDWarm metal plate for Marzhauser (all models), Ludl (all models),
ASI (all models, including z-piezo), Prior H107Features:
• Compatible with the following XY stages: Marzhauser (all models), Ludl (all models), ASI (all models, including z-pi-ezo), Prior H107
• Fits in the opening of the XY stage and creates a temper-ature controlled surface recessed with resepct to the rest of the stage to maintain the original focal plane of the XY stage
• Trimmed 24 mm diameter circular observation opening for imaging
• Compatible with oil immersion lensesRequires one of the following controllers:
• H401-T-CONTROLLER • H401-PENNY
04.5
109.
7
159.7
K-Fr
ame
K-Fr
ame
H401-KK-FRAMEE-METALL-FLATWarm metal plate for Marzhauser (all models), Ludl (all models),
ASI (all models, including z-piezo), Prior H107 and H117Features:
• Compatible with the following XY stages: Marzhauser (all models), Ludl (all models), ASI (all models, including z-pi-ezo), Prior H107 and H117
• Fits in the opening of the XY stage and creates a fl at tem-perature controlled surface at the same height of the rest of the XY stage
• Trimmed 24 mm diameter circular observation opening for imaging
• Compatible with oil immersion lensesRequires one of the following controllers:
• H401-T-CONTROLLER • H401-PENNY
K-Fr
ame
K-Fr
ame
109.
7
30
159.7
H401-PRRIOR H117-METAL-RRECESSEDWarm metal plate
for Prior H117 stageFeatures:
• Compatible with Prior H117 stage• Fits in the opening of the XY stage and creates a temper-
ature controlled surface recessed with resepct to the rest of the stage to maintain the original focal plane of the XY stage
• Trimmed 24 mm diameter circular observation opening for imaging
• Compatible with oil immersion lensesRequires one of the following controllers:
• H401-T-CONTROLLER • H401-PENNY
04.5
109.
7
159.7
K-Fr
ame
K-Fr
ame
HH401-UPP-METALLWarm metal plate for upright microscopes with glass slide traslators Features:
• Compatible with all the upright microscopes equippend with glass slide traslators
• Creates a heated surface under the glass slide transalator• Features a 40x15 mm rectangular opening for imaging
Requires one of the following controllers: • H401-T-CONTROLLER • H401-PENNY
120.
5
02
120
UPR
IGH
TU
PRIG
HT
Zeiss - K-Frame opening
IVF catalog.indb 27 21/06/2018 13:20:01
28
H4401-GLAASS-TABLLEHeated Flat Glass Table
- (440x235 mm)Features:
• Can be positioned on any surface (Table Top, Cabinet work surface, etc) to create a temperature controlled area
• Temperature range: 27°C - 45°CRequires one of the following controllers:
• H401-T-CONTROLLER • H401-PENNY
235
440
81 -
111
STER
EOST
EREO
Zeiss - STEREO
IVF catalog.indb 28 21/06/2018 13:20:02
29
H401-T-PADD-MEDIUUMHeated Flat Metal Plate - size A4 (297x210 mm)
Features:• Can be positioned on any surface (Table Top, Cabinet work
surface, etc) to create a temperature controlled area• Temperature range: 27°C - 45°C
Requires one of the following controllers: • H401-T-CONTROLLER • H401-PENNY
297
210
11.30
PAD
PAD
H4401-T-PAAD-LARGGEHeated Flat Metal Plate - size A3 (420x300 mm)
Features:• Can be positioned on any surface (Table Top, Cabinet work
surface, etc) to create a temperature controlled area• Temperature range: 27°C - 45°C
Requires one of the following controllers: • H401-T-CONTROLLER • H401-PENNY
420
300
11.30
PAD
PAD
H4401-T-PAAD-SMALLLHeated Flat Metal Plate - (174x234 mm)
Features:• Can be positioned on any surface (Table Top, Cabinet work
surface, etc) to create a temperature controlled area• Temperature range: 27°C - 45°C
Requires one of the following controllers: • H401-T-CONTROLLER • H401-PENNY
234
174
11.30
PAD
PAD
Zeiss - T-Pads
IVF catalog.indb 29 21/06/2018 13:20:02
30
Leo Portable Meter
For incubator featuring gas sampling port with spontaneous outlet
For incubator featuring gas sampling port without a spontaneous outlet
Gas fl ows into LEO through a dedicated diff usion inlet.Suction pump is not activated.
LEO activates its suction pump to sample gas from the incubator.LEO releases the sampled gas through its output port. Gas can be VOC fi ltered and reinjected into the incubator.
CO2 - O2 SSampling
Diff usion Mode Pump Mode
LEO is a battery operated, handheld analyzer designed to meas-ure CO2, O2, Temperature, VOC, Relative Humidity and pH.
Includes CO2 and O2 sensors.
Optional modules: Temperature, Humidity, VOC and pH
LEO• User-friendly touch screen interface• Compatible with any incubator on the market • Diff usion or Pump gas sampling modes• Pump suction rate 100 ml/min• Sampling tube and de-humidifi cation kit included• Long term logging • Micro USB for data download• Calibration:
a) Removable sensors can be shipped to certifi ed laboratories to be calibrated. Calibration is stored in sensor on-board mem-ory. Leo reads calibration upon sensor installation b) In situ sensor calibration via LEO calibration
CO2-O2 module can be easily extracted from LEO and sent out for calibration.
The module stores calibration data in its own memory, that Leo reads when the module is put in place.
CO2-O2 Module - Always included
Type Range Accuracy
CO2
Non Dispersive InfraRed (NDIR) dual wave length detector with pressure and temperature com-
pensation
0-20%±(1.0% of full scale +2% scaling) at 6% = ±0.32%
O2
Fluorescence based optical sensor
0-25%±(1.0% of full scale) at 6%
= ±0.25%
IVF catalog.indb 30 21/06/2018 13:20:02
31
Leo Portable Meter
Each sensor module stores calibration data in its own local mem-ory, that LEO reads upon connection.
Leo features two external temperature modules, which can oper-ate at the same time:
• T1 is a small, fl exible immersible thermocouple, ideal for measurements in liquids, such as the culture media in the dish.
• T2 is a thermistor, ideal for measurements of incubator tem-perature, accessed through the sampling port.
T Moddules
Type Range Accuracy
T1K-type Thermocouple.
PFA-insulated; Length: 2 m; OD: 0.13 mm
20-45°C ± 0.1 °C
T2PT1000
Probe length: 150 mm; OD: 1.5 mm; Cable length: 1 m
20-45°C ± 0.1 °C
T1
T2
IVF catalog.indb 31 21/06/2018 13:20:04
32
Leo Portable Meter
LEO T S
Type
LEO Handheld, touch screen, battery operated analyzer. Includes CO2-O2 module, sampling tube and de-humidifi cation kit.
CO2-O2 module(included in Leo)
CO2: Non Dispersive InfraRed (NDIR) dual wave length detector LIFETIME : 5 YEARS O2: Fluorescence based optical sensor LIFETIME : 5 YEARS
T1 module K-type Thermocouple; OD: 0.13 mm
T2 module PT1000 Thermoresistance - Probe length: 150 mm; OD: 1.5 mm
CO2/O2 calibration kit6 mm O tygon tube with a calibrated orifi ce deliveing a fl ow of 100 ml/min to Leo when connected to a gas source at 1 barg (14.7 psig)
Hard Case(included in Leo) Hard travel case for Leo and its accessories
IVF catalog.indb 32 21/06/2018 13:20:05
33
NOTES
IVF catalog.indb 33 21/06/2018 13:20:05
34
Tri-Gas Mixer
TRI-GAS MIXXER 1.5LPM AAND 15LPM
GAS INPUTT REQUIREMMENT
The Tri-Gas Mixer delivers gas mixture of the desired CO2 and O2 concentration with output pressure in the range of 0-2 bar (0-30 psi). Delivery pressure is easily regulated by adjusting the knob of the embedded pressure gauge.
The device is equipped with a mixing tank to ensure the highest composition stability even when the required output fl ow is variable.
Models available with maximum output fl ow rate of 1.5 L/min and 15 L/min. The actual fl ow rate delivered automatically adjusts to match the requirements of the equipment connected.
The Tri-Gas Mixer is compatible with any mini incubator available on the market.
The Tri-Gas Mixer must be connected to pressurized sources of CO2 - N2- Air. Minimum input pressure is related to the desired delivery pressure according to Pinput= Poutput+ 1.3 bar (20 psi).
Okolab air compressors are available to provide pressurized background air.
SECURIITY FEAATURES
To enable the safety routines the Tri-Gas Mixer must also be connected to a pre-mixed back-up cylinder containing gas of the desidered concentration.
The mixer will automatically switch to the backup pre-mixed cylinder if any of the following condition occurs:
• pressure in the mixing tank becomes too low (for instance due to gas requirement exceeding maximum mixer capacity).
• pressure of any of the input gasses becomes too low.
• target gas concentration cannot be achieved.
The Tri-Gas Mixer features advanced safety routines to ensure that the incubators always receive the proper gas.
IVF catalog.indb 34 21/06/2018 13:20:05
35
Tri-Gas Mixer
The Tri-Gas Mixer is available in two models, with maximum output fl ow rate capacity of 1.5 and 15L/min. Besides internal components, the two models diff er by the size of the mixing tank (specs in the back of this brochure).
T -G M 1.5LPM T -G M 15LPM
CO2-O2 S CThe CO2-O2 sensor module stores the calibration in local memory. The CO2-O2 sensor module can be conveniently calibrated on-site with intuitive routines or can be easily extracted from the Tri-Gas Mixer, replaced with a spare CO2-O2 sensor module and sent out for calibration. In both cases, there is no need to disconnect or turn off the Tri-gas Mixer nor to discontinue the gas supply to the incubators.
IVF catalog.indb 35 21/06/2018 13:20:10
36
Tri-Gas Mixer
FEATURES TRI-GAS MIXER 1.5 LPM TRI-GAS MIXER 15 LPM
Output maximum fl ow rate 1.5 L/min 15 L/min
Output pressure 0-2 bar (0-30 psi) regulated with embedded pressure gauge
CO2 range 0-10%
CO2 accuracy ±0.1%
CO2 sensor Non Dispersive InfraRed (NDIR) dual wave length detector. Expected lifetime 10 years
O2 range 0-10%
O2 accuracy ±0.1%
O2 sensor Optical Oxygen Sensor. Expected lifetime 5 years
Air compressor AIR-COMPRESSOR-1.5L AIR-COMPRESSOR-CP3-15L
Mixer dimensions 270x140x325 mm
Mixing tank size 4L 40L
Input gas CO2, N2, air @ 1.3 bar (20 psi) above output pressure
Input gas connectors stainless steel ¼” tube fi ttings
Switch over to backup cylinder
T - M T S
IVF catalog.indb 36 21/06/2018 13:20:11
37
NOTES
IVF catalog.indb 37 21/06/2018 13:20:12
36
Gas Controllers for Cell Cultures Incubator
CO2-O2 CONTTROLLERS FOOR CELL INCUBATOR
O2 CONTROLLER is compatible with any existing Cell Culture CO2 incubator equipped with an access port to add O2 control in the entire incubator.
CO2 -O2 CONTROLLER adds both O2 and CO2 control to the entire incubator or to a smaller semi sealed volume inside it.
To avoid contamination, the system introduces only 2 small tubes through the access port of the incubator.
The inlet tube infuses pure N2 and CO2 into the incubator. The suction pump periodically withdraws a small amount of gas from the incubator to measure O2 and CO2 concentration to provide feedback.
A DRYER attaches magnetically to the side of the incubator and reduces the humidity content of the gas before performing the measurement.
*Applies only to CO2-O2 CONTROLLER
• Adds 100% CO2 and 100% N2 to the volume in which gas control is desired.
• CO2 range: 0-20%
• O2 range: 1-20%
• Accuracy: ± 0.1%
• Set Point Resolution: 0.1%; Repeatability: better than 0.1
• CO2 sensor: 10 year-life Non Dispersive InfraRed (NDIR) dual wave length detector
• O2 sensor: optical sensor - 5 years lifetime
• Sensor calibration against external meter or calibration gas
• Suitable for semi sealed volumes ranging from 10 to 200 liters
• Build in suction pump allows to suck out the gas to perform the concentration measurements
• High effi ciency dryer to dehumidify the gas for concentration measurement (needed only if gas in controlled vol-ume is humid)
• Alarm Buzzer and External Alarm Connector
• RS232 and Mini USB ports for data logging through Okolab DATA LOG software or any third party software via DLL
• DRYER: membrane based dryer that attaches magnetically to the outer side of the incubator
IVF catalog.indb 36 21/06/2018 13:20:12
37
Gas Controllers for Cell Cultures Incubator
PRODUCT CODE CO2 RANGE O2 RANGE
O2 CONTROLLER - 0-21%
CO2 CONTROLLER 0-20% -
CO2 - O2 CONTROLLER 0-20% 0-21%
O2 C
Adds hypoxia control to any CO2 Incubator or semi-sealed volume
CO2-O2 C
Adds hypoxia and CO2 control to any Incubator or semi-sealed volume
CO2 C
Adds CO2 control to any Incubator or semi-sealed volume
IVF catalog.indb 37 21/06/2018 13:20:13
ICO2 CONTROLLER ...........................................................................................................................37CO2-O2 CONTROLLER .......................................................................................................................37H401-GLASS-TABLE ............................................................................................................14, 20, 24, 28H401-K-FRAME-METAL-FLAT..................................................................................................11, 18, 23, 27H401-K-FRAME-METAL-RECESSED ...........................................................................................11, 18, 23, 27H401-NIKON-NI-S-E-METAL .................................................................................................................11H401-NIKON-SMZ25-GLASS .................................................................................................................13H401-NIKON-SMZ25-GLASS/METAL ........................................................................................................14H401-NIKON-SMZ-180 .......................................................................................................................12H401-NIKON-SMZSL-GLASS .................................................................................................................13H401-NIKON-SMZSL-GLASS/METAL ........................................................................................................14H401-NIKON-SMZSS-GLASS .................................................................................................................13H401-NIKON-SMZSS-GLASS/METAL ........................................................................................................14H401-NIKON-TI-SAM-METAL ................................................................................................................12H401-NIKON-TI-S-ER-METAL ................................................................................................................12H401-NIKON-TI-SR-METAL ................................................................................................................... 8H401-NIKON-TI-SR-T-PAD .................................................................................................................... 8H401-NIKON-TS2R-METAL-FLAT ............................................................................................................. 9H401-NIKON-TS2R-T-PAD .................................................................................................................... 9H401-OLYMPUS-IX-SUSP-METAL ....................................................................................................... 16, 23H401-OLYMPUS-SZX2A-GLASS ..............................................................................................................19H401-OLYMPUS-SZX2A-GLASS/METAL .....................................................................................................19H401-OLYMPUS-SZX2B-GLASS ..............................................................................................................19H401-OLYMPUS-SZX2B-GLASS/METAL .....................................................................................................19H401-PRIOR H117-GLASS-RECESSED ................................................................................................. 17, 26H401-PRIOR H117-METAL-RECESSED ........................................................................................11, 18, 23, 27H401-T-CONTROLLER ..................................................................................................................... 4, 6H401-T-PAD-LARGE ............................................................................................................15, 21, 25, 29H401-T-PAD-MEDIUM ..........................................................................................................15, 21, 25, 29H401-T-PAD-SMALL ............................................................................................................15, 21, 25, 29H401-T-PENNY ................................................................................................................................ 6H401-UP-METAL .................................................................................................................... 12, 18, 27H601-K-FRAME -GLASS-FLAT ...............................................................................................................10H601-K-FRAME-GLASS-FLAT ..................................................................................................10, 17, 22, 26H601-K-FRAME-GLASS-RECESSED ............................................................................................10, 17, 22, 26H601-K-FRAME-ME TAL/GLASS .............................................................................................................10H601-K-FRAME-METAL/GLASS ...............................................................................................10, 17, 22, 26H601-NIKON-TI-SR-GLASS ................................................................................................................... 8H601-NIKON-TS2R-GLASS ................................................................................................................... 9H601-NIKON-TS2R-GLASS-FLAT ............................................................................................................. 9H601-NIKON-TS2R-METAL/GLASS .......................................................................................................... 9H601-OLYMPUS-IX-SUSP-GLASS ............................................................................................................16H601-PRIOR H117-GLASS-RECESSED ................................................................................................. 10, 22LEO ............................................................................................................................................30O2 CONTROLLER ............................................................................................................................37TRI-GAS MIXER ...............................................................................................................................34
IVF catalog.indb 38 21/06/2018 13:20:13
NOTES
IVF catalog.indb 39 21/06/2018 13:20:13
NOTES
IVF catalog.indb 40 21/06/2018 13:20:13
NOTES
IVF catalog.indb 41 21/06/2018 13:20:13
www.oko-lab.com
OKOLABIVF CATALOG
IVF catalog.indb 42 21/06/2018 13:20:14