- 1 -

COMPACT DIGITAL RUGGED SWITCH

The CDRS-200 is a Unit Level Digital Switch designated for field deployment in small and medium size units. Modular in construction, it provides an effective solution for capacities beginning as few as 8-12 stations, and extending as high as 200 stations and trunks. Suitable for regiments, battalions and brigade headquarters, the CDRS-200 Digital Switch can be connected in a meshed network.

Tadiran Telecom Ltd.

- 2 -

Full Support Through A Digital PCM Switching Matrix • 128 simultaneous calls. • Up to 12 wireless base stations supporting 8 simultaneous calls, each for rapid

redeployment and short Time-To-Service. • Combat Net Radio Integration (CNRI) support. • Analog and digital stations. ISDN station support. • DTMF, Dial-Pulse, Magneto and ISDN station signaling. • Full multimedia, voice, fax, compressed video and data support. • Up to 38.4 Kbps asynchronous and 64 Kbps synchronous data rates per line. 128

Kbps with ISDN. • Fully automatic. • Built-in attendant station. Optional remote attendant. • Modular construction. Capacity gradually increases through additional cards and

Expansion Cabinets (EC). • Multi-button Feature Phone support (DKT phone series).

DKT Feature Phone for Intensified Communication Requirements The DKT Feature Phone is designed for officers with heightened communication and supervision requirements. DKT is a series of feature phones with up to 132 user programmable buttons. The phones have LED indicators and a large 2x40 character alpha-numeric LCD display. With a minimum capacity of 12 buttons, each basic unit can be expanded to 3 additional 40-button modules. This upgrade insures a comprehensive intercom capability.

FEATURES

- 3 -

Combined Multimedia Capabilities The CDRS-200 combines an outstanding cost-effective solution for legacy field telephony at the unit level, with multimedia capabilities bringing modern up-to-date services to the unit. These services include fax, data transfer, LAN /WAN (with external outer), ISDN and compressed video. Up to 128 Kbps per circuit are provided.

CDRSView: Network Management Software A MS Windows-based management system, CDRSView provides important information and tools essential for efficiently and effectively managing a multi-node network from one central location. With CDRSView, both fault detection and troubleshooting are possible from either a local or a remote site. Using an SNMP protocol, CDRSView enables station feature configuration and provisioning, as well as Class-Of-Service. Connecting Wireless Subscribers The CDRS supports up to 12 base stations through the use of a basic cabinet. An additional 8 base stations can be supported through an expansion cabinet. Each base station is capable of handling 8 simultaneous encrypted calls covering a range of 600 meters in diameter. RF complies with 3 alternative standards: DECT (GAP 1.9GHz), PCS (FCC 1.9GHz, unlicensed 2.4GHz) and ETSI 300-328 Handsets weighing 200 grams use rechargeable NiMH batteries ensuring 4 hours of talk time, or 50 hours of standby time. Voice is digitally encrypted via an 8kbps vocoder. Networking with CDRS The CDRS can interconnect to E1/T1 trunk groups, other Switches (QSIG), and support either a PSTN network (CAS) or ISDN network (PRI). In addition, CDRS has trunk channel capability for PSTN (2-wire CO line), ISDN (BRI) as well as other switches (4-wire E&M). Two-switch stacking capability for capacity enhancement is available

FEATURES

- 4 -

Switching Specifications Digitization method PCM A/µ law Switching matrix 128 timeslots Busy Hour Call Attempts (BHCA) 50,000 Cabinets configuration 1 Base + up to 2 Exp. Card Deployment and Capacity: Base cabinet slots: 3 for trunk/wireless 2 for stations

Maximum system capacity (Base+2 Expansions): 200 stations and trunks (mixed).

Station Types: Analog 2-wire, magneto, dial-pulse,

DTMF signaling Digital ISDN, BRI (via NT1) Feature Phone Modular Wireless mobile with built-in antenna Special CNRI Network Interfaces Trunk Groups E1/T1 ( QSIG,CAS), ISDN

(PRI) Trunk Channel 2-wire CO, 4-wire E&M, BRI Wireless Specifications Base Station Characteristics Base Station Support Base cabinet 2 max. Each Exp. Cabinet 8 max.

Wireless Handsets Base cabinet 200 max Base + Expns 300 max.

Base Station Specifications Coverage radius (Typical) 100 m (indoor) 330 m (outdoor) Simultaneous calls per base, Cabinet 8, 96 Dimensions 33x33x8 cm Installation wall or ceiling mounting Call Security: digital voice transmission encrypted

voice coding, handset ESN/System ID validation

Voice Encoding: 8Kbps Error Correcting Vocoder

Handset Specifications Weight 200 gr Power source NiMH rechargeable battery Talk time (Continues) 4 hours Standby time 50 hours Average RF power 5 mW

RF Specifications 2.4GHz ISM

ETSI 300-328 1.9GHz PCS

FCC 1.88GHz DECT

GAP Frequency Band 2418-2457 MHz

Frequency Band 1920-1930 MHz

Frequency Band 1920 - 1930 MHz

RF peak power 50 mW eirp

RF peak power 40 mW

RF peak power 250 mW

Modulation Frequency

Hopping Spread Spectrum. 100

hops per second

Multiple Access Method

TDMA/FDMA/

TDD

Duplex Mode

TDD

Physical Characteristics Dimensions (HxWxD): Base cabinet: 378 x 444 x 267 cm Expansion cabinet: 378 x 444 x 267 cm

Weight : Base cabinet: < 20kg Expansion cabinet: 18 kg

Power: 220/115 VAC and/or 12/24 VDC 70 Watts (fully populated cabinet)

Environmental Characteristics: Operating temperature: - 20°C to +55°C Storage temperature: - 25°C to +60°C Relative humidity: 98% at + 55°C Environmental condition: per MIL-STD-810 Electromagnetic Compatibility: Per MIL-STD-461. Lightning protection: All lines/trunks Installation Options: Table-top Mount 19" Rack Mount

Accessories Battery Charger: 220VAC/12VDC, 20 Amp. Battery Pack:

Rugged, maintenance free, heavy duty, Lead-Acid, 12VDC/ 100 A/H. 12 hour continuous operation of switch with full basic capacity.

Attendant Handset Military type H-250 Attendant Headset Military type RC1010

TECHNICAL SPECIFICATIONS

For further information please contact: Tadiran Telecom Ltd. http://www.tadirantele.com