omsw with brake nose orbital motors•motors with corrosion resistant parts • wheel motors with...
TRANSCRIPT
MAKING MODERN LIVING POSSIBLE
Technical Information
Orbital MotorsOMSW with brake nose
powersolutions.danfoss.com
Revision history Table of revisions
Date Changed Rev
October 2014 Changed to Danfoss layout DA
November 2012 CD
Technical Information OMSW with brake nose Orbital Motors
2 520L0472 • Rev DA • October 2014
A wide range of Orbital MotorsCharacteristic, features and application areas of Orbital Motors....................................................................................4Characteristic features of Danfoss Orbital Motors................................................................................................................4Technical features of Danfoss Orbital Motor..........................................................................................................................4Survey of literature with technical data on Danfoss Orbital Motors..............................................................................5
Data surveySpeed, torque and output.............................................................................................................................................................6
VersionsOMSW version................................................................................................................................................................................... 7Features available (options)..........................................................................................................................................................7
Code numbersOrdering...............................................................................................................................................................................................8
Technical dataTechnical data for OMSW.............................................................................................................................................................. 9Max. permissible shaft seal pressure.......................................................................................................................................10
OMSW with check valves ...................................................................................................................................................... 10OMSW with drain connection.............................................................................................................................................. 10
Pressure drop in motor................................................................................................................................................................ 11Oil flow in drain line...................................................................................................................................................................... 11Direction of shaft rotation...........................................................................................................................................................11Permissible shaft load for OMSW............................................................................................................................................. 12
Permissible radial shaft load.................................................................................................................................................12Function diagrams.........................................................................................................................................................................13Shaft version.................................................................................................................................................................................... 17Port thread versions......................................................................................................................................................................17
DimensionsOMSW with side port and check valve...................................................................................................................................18OMSW with side port and drain connection........................................................................................................................20OMSW with end port and check valve................................................................................................................................... 22OMSW with end port and drain connection........................................................................................................................ 24
Weight of motors
Technical Information OMSW with brake nose Orbital Motors
Contents
520L0472 • Rev DA • October 2014 3
Characteristic, features and application areas of Orbital Motors
Danfoss is a world leader within production of low speed orbital motors with high torque. We can offermore than 3,000 different orbital motors, categorised in types, variants and sizes (including different shaftversions).
The motors vary in size (rated displacement) from 8 cm³ [0.50 in³] to 800 cm³ [48.9 in³] per revolution.
Speeds range up to approximate 2,500 min-1 (rpm) for the smallest type and up to approximate 600 min-1
(rpm) for the largest type.
Maximum operating torques vary from 13 N•m [115 lbf•in] to 2,700 N•m [24,000 lbf•in] (peak) andmaximum outputs are from 2.0 kW [2.7 hp] to 70 kW [95 hp].
Characteristic features of Danfoss Orbital Motors
• Smooth running over the entire speed range
• Constant operating torque over a wide speed range
• High starting torque
• High return pressure without the use of drain line (High pressure shaft seal)
• High efficiency
• Long life under extreme operating conditions
• Robust and compact design
• High radial and axial bearing capacity
• For applications in both open and closed loop hydraulic systems
• Suitable for a wide variety of hydraulics fluids
Technical features of Danfoss Orbital Motor
The programme is characterised by technical features appealing to a large number of applications and apart of the programme is characterised by motors that can be adapted to a given application. Adaptionscomprise the following variants among others:
Technical Information OMSW with brake nose Orbital Motors
A wide range of Orbital Motors
4 520L0472 • Rev DA • October 2014
• Motors with corrosion resistant parts
• Wheel motors with recessed mounting flange
• OMP, OMR- motors with needle bearing
• OMR motor in low leakage version
• OMR motors in a super low leakage version
• Short motors without bearings
• Ultra short motors
• Motors with integrated positive holding brake
• Motors with integrated negative holding brake
• Motors with integrated flushing valve
• Motors with speed sensor
• Motors with tacho connection
• All motors are available with black finish paint
Survey of literature with technical data on Danfoss Orbital Motors
Detailed data on all Danfoss Orbital Motors can be found in our motor catalogue, which is divided intomore individual subcatalogues:• General information on Danfoss Orbital Motors: function, use, selection of orbital motor, hydraulic
systems, etc.• Technical data on small motors: OML and OMM
• Technical data on medium sized motors: OMP, OMR, OMH
• Technical data on medium sized motors: DH and DS
• Technical data on medium sized motors: OMEW
• Technical data on medium sized motors: VMP
• Technical data on medium sized motors: VMR
• Technical data on large motors: OMS, OMT and OMV
• Technical data on large motors: TMT
• Technical data on large motors: TMV
A general survey brochure on Danfoss Orbital Motors gives a quick motor reference based on power,torque, speed and capabilities.
Technical Information OMSW with brake nose Orbital Motors
A wide range of Orbital Motors
520L0472 • Rev DA • October 2014 5
Speed, torque and output
Max. speed / Max. torque / Max. output
125 160 200 250 315 400 500
125 160 200 250 315 400 500
125 160 200 250 315 400 500
Nmlbf•in
hp kW
151-2005.11
302010
20
10
800600400200
10000
8000
6000
4000
2000
1200
1000
800
600
400
200
min-1
(rpm)
OMSW
[light] Intermittent values
[dark] Continuous values
The bar diagrams above are useful for a quick selection of relevant motor size for the application. Thefinal motor size can be determined by using the function diagram for each motor size.• OMSW can be found here: Function diagrams on page 13.
The function diagrams are based on actual tests on a representative number of motors from ourproduction. The diagrams apply to a return pressure between 5 and 10 bar [75 and 150 psi] when usingmineral based hydraulic oil with a viscosity of 35 mm2/s [165 SUS] and a temperature of 50°C [120°F]. Forfurther explanation concerning how to read and use the function diagrams, please consult the paragraph"Selection of motor size" in the technical information "General" 520L0232.
Technical Information OMSW with brake nose Orbital Motors
Data survey
6 520L0472 • Rev DA • October 2014
OMSW version
Mountingflange
Spigotdiameter(front/rearend)
Bolt circlediameter(BC)
Shaft Port size Europeanversion
USversion
Sideportversion
Endportversion
Standardshaftseal
Drainconnection
Checkvalve
Maintypedesignation
Wheel Ø5.0 in / Ø5.0in
Ø 5.8 in Tap. 1 1/4" 7/8 - 14 UNF X X X No Yes OMSW
X X X Yes No OMEW
X X X No Yes OMSW
X X X Yes No OMSW
Motors are painted black
Features available (options)
Shaft options:• 1 3/8” shaft• Side port G 1/2• End port G 1/2
High pressure shaft seal
Technical Information OMSW with brake nose Orbital Motors
Versions
520L0472 • Rev DA • October 2014 7
OMSW code numbers
Displacement
Code Numbers 125 160 200 250 315 400 500
151F 2502 2503 2504 2505 2506 2507 2508
151F 2512 2513 2514 2515 2516 2517 2518
151F 2522 2523 2524 2525 2526 2527 2528
151F 2532 2533 2534 2535 2536 2537 2538
Ordering
Add the four digit prefix “151F” to the four digit numbers from the chart for complete code number.
Example:
151F2514 for an OMSW 200 as sideport version and with drain connection
Orders will not be accepted without the four digit prefix.
Technical Information OMSW with brake nose Orbital Motors
Code numbers
8 520L0472 • Rev DA • October 2014
Technical data for OMSW
Type OMSW OMSW OMSW OMSW OMSW OMSW OMSW
Motor size 125 160 200 250 315 400 500
Geometric displacement cm3
[in3]125.7[7.67]
159.7[9.75]
200.0[12.20]
250.0[15.26]
314.9[19.22]
393.0[23.98]
488.0[29.78]
Maximum speed min-1
[rpm]cont. 600 470 375 300 240 190 155
int.1) 720 560 450 360 285 230 185
Maximum torque N•m[lbf•in]
cont. 375[3320]
490[4340]
610[5400]
720[6370]
825[7300]
865[7660]
850[7520]
int.1) 490[4340]
600[5310]
720[6370]
870[7700]
1000[8850]
990[8760]
990[8760]
Maximum output kW[hp]
cont. 18.0[24.1]
16.5[22.1]
16.5[22.1]
14.5[19.4]
15.0[20.1]
11.0[14.8]
9.0[12.1]
int.1) 22.5[30.2]
22.5[30.2]
23.0[30.8]
18.0[24.1]
17.0[22.8]
12.5[16.8]
10.5[14.1]
Maximum pressure drop bar[psi]
cont. 210[3050]
210[3050]
210[3050]
200[2900]
200[2900]
160[2320]
120[1740]
int.1) 275[3990]
260[3770]
250[3630]
250[3630]
240[3480]
190[2760]
140[2030]
Peak2) 295[4280]
280[4060]
270[3920]
270[3920]
260[3770]
210[3050]
160[2320]
Maximum oil flow l/min[US gal/min]
cont. 75[19.8]
75[19.8]
75[19.8]
75[19.8]
75[19.8]
75[19.8]
75[19.8]
int.1) 90[23.8]
90[23.8]
90[23.8]
90[23.8]
90[23.8]
90[23.8]
90[23.8]
Maximum starting pressurewith unloaded shaft
bar[psi]
10[145]
8[115]
8[115]
8[115]
8[115]
8[115]
8[115]
Minimum starting torque at maximum press drop cont.N•m [lbf•in]
290[2570]
370[3270]
470[4160]
560[4960]
710[6280]
710[6280]
660[5840]
at maximum press drop int.1)
N•m [lbf•in]380[3360]
460[4070]
560[4960]
700[6200]
850[7520]
840[7430]
770[6820]
1) Intermittent operation: the permissible values may occur for max. 10% of every minute.2) Peak load: the permissible values may occur for maximum 1% of every minute.
Type Max inlet pressure Max return pressure with drain line
OMSW bar cont. 230 140
[psi] [3340] [2030]
bar int.1) 290 175
[psi] [4280] [2540]
bar peak2) 300 210
[psi] [4350] [3050]1) Intermittent operation: the permissible values may occur for max. 10% of every minute.2) Peak load: the permissible values may occur for max. 1% of every minute.
For max. permissible combination of flow and pressure, see function diagram for actual motor.
Technical Information OMSW with brake nose Orbital Motors
Technical data
520L0472 • Rev DA • October 2014 9
Max. permissible shaft seal pressure
OMSW with check valves
The pressure on the shaft seal never exceeds pressure in the return line
151-1316.10
OMSW with drain connection
Use of the drain connection:The shaft seal pressure equals the pressure in the drain line.
Without use of the drain connection:The shaft seal pressure equals the average of input pressure and return pressure.
151-1855.10
Max. pressure on shaft seal
151-1674.10
0 100 200 300 400 500 600 700 800 max.
1500
1200
900
600
300
0
100
90
80
70
60
50
40
30
20
10
0
psi bar
P P
min-1
(rpm)
[dotted line] Intermittent operation: the permissible values may occur for max. 10% of every minute
[solid line] Continuous operation
Technical Information OMSW with brake nose Orbital Motors
Technical data
10 520L0472 • Rev DA • October 2014
Pressure drop in motor
151-1408.10
0 10 20 30 40 50 60 70 80 90 l/min
0 2 4 6 8 10 12 14 16 18 20 22 US gal/min
200
150
100
50
0
16
14
12
10
8
6
4
2
0
psi bar
∆ p ∆ p
Q
Q
The curve applies to an unloaded motor shaft and an oil viscosity of 35 mm2/s [165 SUS]
Oil flow in drain line
The table below shows the max. oil flow in the drain line at a return pressure less than 5-10 bar [75-150psi].
Pressure Viscosity Oil flow in drop drain line bar mm2/s l/min [psi] [SUS] [US gal/min]
Pressure drop bar [psi] Viscosity mm2/s [SUS] Oil flow in drain line l/min [US gal/min]
140 [2030] 20 [100] 1.5 [0.40]
35 [165] 1.0 [0.26]
210 [3050] 20 [100] 3.0 [0.79]
35 [165] 2.0 [0.53]
Direction of shaft rotation
151-2010.11
B BA A
151-2011.11
B BA A
X X X X
X-X X-X
Technical Information OMSW with brake nose Orbital Motors
Technical data
520L0472 • Rev DA • October 2014 11
Permissible shaft load for OMSW
Mounting flange: Wheel / Shaft: All shaft types
Permissible radial shaft load
The output shaft runs in tapered roller bearings that permit high axial and radial forses.
The permissible radial load on the shaft is shown for an axial load of 0 N as a function of the distance fromthe mounting flange to the point of load application.
The curve is based on B10 Bearing life (2000 hours or 12 000 000 shaft revolutions at 100 min-1) at ratedoutput torque, when mineral-based hydraulic oil with a sufficient content of anti-wear additives, is used.
Technical Information OMSW with brake nose Orbital Motors
Technical data
12 520L0472 • Rev DA • October 2014
Function diagrams
OMS 125lbf• in Nm
4500
4000
3500
3000
2500
2000
1500
1000
500
0
500
450
400
350
300
250
200
150
100
50
0
0 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750
151-903.10
min-1
(rpm)
10 l/
min
[2.6
US
gal/m
in]
Q=5
l/m
in[1
.3 U
S ga
l/min
]
Q=9
0 l/m
in[2
3.8
US
gal/m
in]
75 l/
min
[19.
8 U
S ga
l/min
]
20 l/
min
[5.3
US
gal/m
in]
40 l/
min
[10.
6 U
S ga
l/min
]
30 l/
min
[7.9
US
gal/m
in]
50 l/
min
[13.
2 U
S ga
l/min
]
60 l/
min
[15.
9 U
S ga
l/min
]
210 bar
∆ p= 35 bar
3050 psi175 bar
2540 psi
225 bar3260 psi
250 bar3630 psi
105 bar1520 psi
∆ p=275 bar3990 psi
510 psi
2030 psi140 bar
1020 psi70 bar
N=1kW
6kW
N=21kW
75%70%
12hp 18hp15hp
6hp
1hp
η t =85%
80%
83%
η t =60%
9hp
15kW12kW
21hp 18kW
3kW
9kW
3hp
OMS 160lbf• in Nm
6000
5000
4000
3000
2000
1000
0
600
550
500
450
400
350
300
250
200
150
100
50
0
0 50 100 150 200 250 300 350 400 450 500 550 600
151-904.11
min-1
(rpm)
10 l/
min
[2.6
US
gal/m
in]
Q=5
l/m
in[1
.3 U
S ga
l/min
]
Q=9
0 l/m
in[2
3.8
US
gal/m
in]
75 l/
min
[19.
8 U
S ga
l/min
]
60 l/
min
[15.
9 U
S ga
l/min
]
30 l/
min
[7.9
US
gal/m
in]
20 l/
min
[5.3
US
gal/m
in]
40 l/
min
[10.
6 U
S ga
l/min
]
50 l/
min
[13.
2 U
S ga
l/min
]
210 bar
∆ p= 35 bar
3050 psi175 bar
2540 psi
225 bar3260 psi
160 bar2320 psi140 bar
2030 psi
∆ p=260 bar3770 psi
510 psi
1520 psi105 bar
1020 psi70 barN=1kW
6kW
N=21kW
75% 70%
12hp
18hp
15hp6hp
1hp
η t =87%
80%83%85%86%
η t =60%
9hp
15kW12kW
21hp
18kW
3kW
9kW
3hp
Explanation of function diagram use, basis and conditions can be found on page 5.
[blue] Continuous range
[pink] Intermittent range (max. 10% operation every minute)
Intermittent pressure drop and oil flow must not occur simultaneously.
Technical Information OMSW with brake nose Orbital Motors
Technical data
520L0472 • Rev DA • October 2014 13
OMS 200lbf• in Nm
7000
6000
5000
4000
3000
2000
1000
0
750
700
650
600
550
500
450
400
350
300
250
200
150
100
50
0
0 50 100 150 200 250 300 350 400 450 500
151-905.10
min-1
(rpm)
10 l/
min
[2.6
US
gal/m
in]
Q=5
l/m
in[1
.3 U
S ga
l/min
]
Q=9
0 l/m
in[2
3.8
US
gal/m
in]
75 l/
min
[19.
8 U
S ga
l/min
]
20 l/
min
[5.3
US
gal/m
in]
40 l/
min
[10.
6 U
S ga
l/min
]
30 l/
min
[7.9
US
gal/m
in]
50 l/
min
[13.
2 U
S ga
l/min
]
60 l/
min
[15.
9 U
S ga
l/min
]
210 bar
∆ p= 30 bar
3050 psi175 bar
2540 psi160 bar
2320 psi
225 bar3260 psi
∆ p=250 bar3630 psi
105 bar1520 psi
440 psi
2030 psi140 bar
1020 psi70 barN=1kW
6kW
N=21kW
75%70%
12hp
18hp
15hp
6hp
1hp
η t =88%
80%83%
85%86%
η t =60%
9hp
15kW12kW
21hp
18kW
3kW
9kW
3hp
OMS 250lbf• in Nm
8000
7000
6000
5000
4000
3000
2000
1000
0
900
800
700
600
500
400
300
200
100
0
0 50 100 150 200 250 300 350 400
151-1039.10
min-1
(rpm)
10 l/
min
[2.6
US
gal/m
in]
Q=5
l/m
in[1
.3 U
S ga
l/min
]
Q=9
0 l/m
in[2
3.8
US
gal/m
in]
75 l/
min
[19.
8 U
S ga
l/min
]
20 l/
min
[5.3
US
gal/m
in]
40 l/
min
[10.
6 U
S ga
l/min
]
30 l/
min
[7.9
US
gal/m
in]
50 l/
min
[13.
2 U
S ga
l/min
]
60 l/
min
[15.
9 U
S ga
l/min
]
200 bar
∆ p= 35 bar
2900 psi175 bar
2540 psi155 bar
2250 psi
225 bar3260 psi
∆ p=250 bar3630 psi
95 bar1390 psi
125 bar1810 psi
510 psi
2030 psi140 bar
1020 psi70 barN=1kW
6kW
N=21kW
75%
70%
12hp
18hp15hp
6hp
1hp
80%83%
85%86%
η t =60%
η t =87%
9hp
15kW12kW
21hp
18kW
3kW
9kW
3hp
Explanation of function diagram use, basis and conditions can be found on page 5.
[blue] Continuous range
[pink] Intermittent range (max. 10% operation every minute)
Intermittent pressure drop and oil flow must not occur simultaneously.
Technical Information OMSW with brake nose Orbital Motors
Technical data
14 520L0472 • Rev DA • October 2014
OMS 400lbf• in Nm
10000
9000
8000
7000
6000
5000
4000
3000
2000
1000
0
1100
1000
900
800
700
600
500
400
300
200
100
0
0 25 50 75 100 125 150 175 200 225 250
151-1491.10
min-1
(rpm)
10 l/
min
[2.6
US
gal/m
in]
Q=5
l/m
in[1
.3 U
S ga
l/min
]
Q=9
0 l/m
in[2
3.8
US
gal/m
in]
75 l/
min
[19.
8 U
S ga
l/min
]
20 l/
min
[5.3
US
gal/m
in]
40 l/
min
[10.
6 U
S ga
l/min
]
30 l/
min
[7.9
US
gal/m
in]
50 l/
min
[13.
2 U
S ga
l/min
]
60 l/
min
[15.
9 U
S ga
l/min
]
∆ p= 30 bar
175 bar2540 psi
160 bar2320 psi
105 bar1520 psi
∆ p=190 bar2760 psi
120 bar1740 psi
440 psi
2030 psi140 bar
870 psi60 bar
1160 psi80 bar
N=1kW
6kW
N=15kW
75%70%
12hp
15hp
6hp
1hp
η t =87%
80%83%
86%85%
η t =60%
9hp
12kW
3kW
9kW
3hp
OMS 315lbf• in Nm
10000
9000
8000
7000
6000
5000
4000
3000
2000
1000
0
1100
1000
900
800
700
600
500
400
300
200
100
0
0 25 50 75 100 125 150 175 200 225 250 275 300
151-906.10
min-1
(rpm)
10 l/
min
[2.6
US
gal/m
in]
Q=5
l/m
in[1
.3 U
S ga
l/min
]
Q=9
0 l/m
in[2
3.8
US
gal/m
in]
75 l/
min
[19.
8 U
S ga
l/min
]
20 l/
min
[5.3
US
gal/m
in]
40 l/
min
[10.
6 U
S ga
l/min
]
30 l/
min
[7.9
US
gal/m
in]
50 l/
min
[13.
2 U
S ga
l/min
]
60 l/
min
[15.
9 U
S ga
l/min
]
200 bar
∆ p= 35 bar
2900 psi175 bar
2540 psi160 bar
2320 psi
225 bar3260 psi
∆ p=240 bar3480 psi
120 bar1740 psi
510 psi
2030 psi140 bar
1020 psi70 bar
1450 psi100 bar
N=1kW
6kW
N=18kW
75%
70%
12hp
18hp
15hp
6hp
1hp
η t =87% 80%
83%
85%
η t =60%
9hp
15kW
12kW
3kW
9kW
3hp
Explanation of function diagram use, basis and conditions can be found on page 5.
[blue] Continuous range
[pink] Intermittent range (max. 10% operation every minute)
Intermittent pressure drop and oil flow must not occur simultaneously.
Technical Information OMSW with brake nose Orbital Motors
Technical data
520L0472 • Rev DA • October 2014 15
OMS 500lbf• in Nm
10000
9000
8000
7000
6000
5000
4000
3000
2000
1000
0
1100
1000
900
800
700
600
500
400
300
200
100
0
0 25 50 75 100 125 150 175 200
151-1984.10
min-1
(rpm)
10 l/
min
[2.6
US
gal/m
in]
Q=5
l/m
in[1
.3 U
S ga
l/min
]
Q=9
0 l/m
in[2
3.8
US
gal/m
in]
75 l/
min
[19.
8 U
S ga
l/min
]
20 l/
min
[5.3
US
gal/m
in]
40 l/
min
[10.
6 U
S ga
l/min
]
30 l/
min
[7.9
US
gal/m
in]
50 l/
min
[13.
2 U
S ga
l/min
]
60 l/
min
[15.
9 U
S ga
l/min
]
∆ p= 25 bar
105 bar1520 psi
∆ p=140 bar2030 psi
120 bar1740 psi
360 psi
730 psi50 bar
1160 psi80 bar
1300 psi90 bar
N=1kW
6kW
N=12kW
75% 70%
12hp6hp
1hp
η t =88%
80%
83%
86% 85%
η t =60%
9hp3kW
9kW
3hp
Explanation of function diagram use, basis and conditions can be found on page 5.
[blue] Continuous range
[pink] Intermittent range (max. 10% operation every minute)
Intermittent pressure drop and oil flow must not occur simultaneously.
Technical Information OMSW with brake nose Orbital Motors
Technical data
16 520L0472 • Rev DA • October 2014
Shaft version
A: Tapered 1 1/4 in shaft
N: Cone 1:8 SAE J501
M: 1 - 20 UNEF across flats 1 7/16 in Tightening torque: 200 ± 10 Nm [1770 ± 85 lbf-in]
O: Parallel key 5/16 x 5/16 x 1 1/4 SAE
Port thread versions
A: UNF main port
C: 7/8 - 14 UNF o-ring boss port
B: UNF drain port 7/16 - 20 UNF o-ring boss port
Technical Information OMSW with brake nose Orbital Motors
Technical data
520L0472 • Rev DA • October 2014 17
OMSW with side port and check valve
OMSW with side port and check valve
max. 103 [4.06]
Ø127.5 [5.000]Ø126.9 [4.996]
Ø124 [4.88]Ø94 [3.70]
Ø58.85 [2.317]Ø58.80 [2.315]
R18 [0.71]70 [2.76]16 [0.63]16 [0.63]
max. 133.25 [5.246]
R20 [0.79]
max. 56 [2.20] max. 51 [2.01]
Ø127.0 [5.000]Ø126.9 [4.999]
Ø147.62 [5.812]
Ø13.5 [0.531]
151-1999.13
21 [0
.83]
8 [0
.31]14
0.10
[5.5
16]
138.
25 [5
.443
]11
9.1
[4.6
9]54
.3 [2
.138
]53
.7 [2
.114
]4
[0.1
6]
R5 [0
.18]
80 [3
.15]
2.3
[0.0
91]
1.7
[0.0
67]
43 [3
.69]
max
. 133
.25
[5.2
46]
Ø76
.2 [3
.000
]
22 [0
.87]
Not PaintedPlease note:The stated dimensionis without paint.
D
E
L 2
L 3
L 1
D: 7/8 - 14 UNF; 16.76 mm [0. 66 in] deep
E: Thread for external brake 4 x 5/16 - 18 UNF; 13 mm [0.51 in] deep
Technical Information OMSW with brake nose Orbital Motors
Dimensions
18 520L0472 • Rev DA • October 2014
Type L1 mm [in] L2 mm [in] L3 mm [in]
OMSW 125 21.8 [0.86] 58.8 [2.31] 100.2 [3.94]
OMSW 160 27.8 [1.09] 64.8 [2.55] 106.2 [4.18]
OMSW 200 34.8 [1.37] 71.8 [2.83] 113.2 [4.46]
OMSW 250 43.5 [1.71] 80.5 [3.17] 121.9 [4.80]
OMSW 315 54.8 [2.16] 91.8 [3.61] 133.2 [5.24]
OMSW 400 68.4 [2.69] 105.4 [4.15] 146.8 [5.78]
OMSW 500 68.4 [2.69] 105.4 [4.15] 146.8 [5.78]
Technical Information OMSW with brake nose Orbital Motors
Dimensions
520L0472 • Rev DA • October 2014 19
OMSW with side port and drain connection
OMSW with side port and drain connection
max. 103 [4.06]
Ø127.5 [5.000]Ø126.9 [4.996]
Ø124 [4.88]Ø94 [3.70]
Ø58.85 [2.317]Ø58.80 [2.315]
R18 [0.71]
70 [2.76]23 [0.90]
16 [0.63]16 [0.63]
max. 133.25 [5.246]
R20 [0.79]
max. 56 [2.20] max. 51 [2.01]
Ø127.0 [5.000]Ø126.9 [4.999]
Ø147.62 [5.812]
Ø13.5 [0.531]
151-2000.13
7 [0
.27]
21 [0
.83]
8 [0
.31]14
0.10
[5.5
16]
138.
25 [5
.443
]11
9.1
[4.6
9]54
.3 [2
.138
]53
.7 [2
.114
]4
[0.1
6]
R5 [0
.18]
80 [3
.15]
2.3
[0.0
91]
1.7
[0.0
67]
43 [3
.69]
max
. 133
.25
[5.2
46]
Ø76
.2 [3
.000
]
22 [0
.87]
Not PaintedPlease note:The stated dimensionis without paint.
C
D
E
L 2
L 3
L 1
C: 7/16 - 20 UNF; 11.43 mm [0. 45 in] deep
D: 7/8 - 14 UNF; 16.76 mm [0. 66 in] deep O-ring boss port
E: Thread for external brake 4 x 5/16 - 18 UNC; 13 mm [0.51 in] deep
Technical Information OMSW with brake nose Orbital Motors
Dimensions
20 520L0472 • Rev DA • October 2014
Type L1 mm [in] L2 mm [in] L3 mm [in]
OMSW 125 21.8 [0.86] 58.8 [2.31] 100.2 [3.94]
OMSW 160 27.8 [1.09] 64.8 [2.55] 106.2 [4.18]
OMSW 200 34.8 [1.37] 71.8 [2.83] 113.2 [4.46]
OMSW 250 43.5 [1.71] 80.5 [3.17] 121.9 [4.80]
OMSW 315 54.8 [2.16] 91.8 [3.61] 133.2 [5.24]
OMSW 400 68.4 [2.69] 105.4 [4.15] 146.8 [5.78]
OMSW 500 68.4 [2.69] 105.4 [4.15] 146.8 [5.78]
Technical Information OMSW with brake nose Orbital Motors
Dimensions
520L0472 • Rev DA • October 2014 21
OMSW with end port and check valve
OMSW with end port and check valve
max.103[4.06] max.51[2.01]max.56[2.20]
1L4[
0.16
]
R5[0
.18]
L 2
54.3
[2.1
38]
140.
10[5
.516
]
53.7
[2.1
14]
138.
25[5
.443
]
8[0.
31]
43[3
.69] 80
[3.1
5]
21[0
.83]
2.3[
0.09
1]1.
7[0.
067]
Ø127.0[5.000]Ø126.9[4.999]
R20[0.79]Ø13.5[0.531]
Ø76
.2[3
.000
]
max.133.25[5.246]
Ø147.62[5.812]
max
.133
.25[
5.24
6]
151-2002.13
119.
1[4.
69]
EAA
31[1.22] 38[1.50]
3[0.
12]
R23[0.90]
D
A-A
is without paint.
Not PaintedPlease note:The stated dimension
Ø127.0[5.000]Ø126.9[4.996]
Ø94[3.70]Ø124[4.88]
Ø58.80[2.315]Ø58.85[2.317]
D: 7/8 - 14 UNF; 16.76 mm [0. 66 in] deep O-ring boss port
E: Thread for external brake 4 x 5/16 - 18 UNC; 13 mm [0.51 in] deep
Technical Information OMSW with brake nose Orbital Motors
Dimensions
22 520L0472 • Rev DA • October 2014
Type L1 mm [in] L2 mm [in]
OMSW 125 21.8 [0.86] 101.8 [4.01]
OMSW 160 27.8 [1.09] 107.8 [4.24]
OMSW 200 34.8 [1.37] 114.8 [4.52]
OMSW 250 43.5 [1.71] 123.5 [4.86]
OMSW 315 54.8 [2.16] 134.8 [5.31]
OMSW 400 68.4 [2.69] 148.4 [5.84]
OMSW 500 68.4 [2.69] 148.4 [5.84]
Technical Information OMSW with brake nose Orbital Motors
Dimensions
520L0472 • Rev DA • October 2014 23
OMSW with end port and drain connection
OMSW with end port and drain connection
max.103[4.06] max.51[2.01]max.56[2.20]
1L4[
0.16
]
R5[0
.18]
L 2
54.3
[2.1
38]
140.
10[5
.516
]
53.7
[2.1
14]
138.
25[5
.443
]
8[0.
31]
43[3
.69] 80
[3.1
5]
21[0
.83]
2.3[
0.09
1]1.
7[0.
067]
Ø127.0[5.000]Ø126.9[4.999]
R20[0.79]Ø13.5[0.531]
Ø76
.2[3
.000
]
max.133.25[5.246]
Ø147.62[5.812]
max
.133
.25[
5.24
6]
151-2001.13
119.
1[4.
69]
EAA
31[1.22] 38[1.50]
3[0.
12]
39[1
.53]
R23[0.90]
C
D
5[0.20]
A-A
is without paint.
Not PaintedPlease note:The stated dimension
Ø127.0[5.000]Ø126.9[4.996]
Ø94[3.70]Ø124[4.88]
Ø58.80[2.315]Ø58.85[2.317]
C: 7/16 - 20 UNF; 11.43 mm [0. 45 in] deep
D: 7/8 - 14 UNF; 16.76 mm [0. 66 in] deep O-ring boss port
E: Thread for external brake 4 x 5/16 - 18 UNC; 13 mm [0.51 in] deep
Technical Information OMSW with brake nose Orbital Motors
Dimensions
24 520L0472 • Rev DA • October 2014
Type L1 mm [in] L2 mm [in]
OMSW 125 21.8 [0.86] 101.8 [4.01]
OMSW 160 27.8 [1.09] 107.8 [4.24]
OMSW 200 34.8 [1.37] 114.8 [4.52]
OMSW 250 43.5 [1.71] 123.5 [4.86]
OMSW 315 54.8 [2.16] 134.8 [5.31]
OMSW 400 68.4 [2.69] 148.4 [5.84]
OMSW 500 68.4 [2.69] 148.4 [5.84]
Technical Information OMSW with brake nose Orbital Motors
Dimensions
520L0472 • Rev DA • October 2014 25
Code no Weightkg [lb]
151F2502 10.8 [23.8]
151F2503 11.2 [24.7]
151F2504 11.6 [25.6]
151F2505 12.1 [26.7]
151F2506 12.8 [28.2]
151F2507 13.6 [30.0]
151F2508 13.6 [30.0]
151F2512 10.8 [23.8]
151F2513 11.2 [24.7]
151F2514 11.6 [25.6]
151F2515 12.1 [26.7]
151F2516 12.8 [28.2]
151F2517 13.6 [30.0]
151F2518 13.6 [30.0]
151F2522 10.8 [23.8]
151F2523 11.2 [24.7]
151F2524 11.6 [25.6]
151F2525 12.1 [26.7]
151F2526 12.8 [28.2]
151F2527 13.6 [30.0]
151F2528 13.6 [30.0]
151F2532 10.8 [23.8]
151F2533 11.2 [24.7]
151F2534 11.6 [25.6]
151F2535 12.1 [26.7]
151F2536 12.8 [28.2]
151F2537 13.6 [30.0]
151F2538 13.6 [30.0]
Technical Information OMSW with brake nose Orbital Motors
Weight of motors
26 520L0472 • Rev DA • October 2014
Technical Information OMSW with brake nose Orbital Motors
520L0472 • Rev DA • October 2014 27
Danfoss Power Solutions is a global manufacturer and supplier of high-quality hydraulic andelectronic components. We specialize in providing state-of-the-art technology and solutionsthat excel in the harsh operating conditions of the mobile off-highway market. Building onour extensive applications expertise, we work closely with our customers to ensureexceptional performance for a broad range of off-highway vehicles.
We help OEMs around the world speed up system development, reduce costs and bringvehicles to market faster.
Danfoss – Your Strongest Partner in Mobile Hydraulics.
Go to www.powersolutions.danfoss.com for further product information.
Wherever off-highway vehicles are at work, so is Danfoss. We offer expert worldwide supportfor our customers, ensuring the best possible solutions for outstanding performance. Andwith an extensive network of Global Service Partners, we also provide comprehensive globalservice for all of our components.
Please contact the Danfoss Power Solution representative nearest you.
Local address:
Danfoss Power Solutions GmbH & Co. OHGKrokamp 35D-24539 Neumünster, GermanyPhone: +49 4321 871 0
Danfoss Power Solutions ApSNordborgvej 81DK-6430 Nordborg, DenmarkPhone: +45 7488 2222
Danfoss Power Solutions (US) Company2800 East 13th StreetAmes, IA 50010, USAPhone: +1 515 239 6000
Danfoss Power Solutions(Shanghai) Co., Ltd.Building #22, No. 1000 Jin Hai RdJin Qiao, Pudong New DistrictShanghai, China 201206Phone: +86 21 3418 5200
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies toproducts already on order provided that such alterations can be made without changes being necessary in specifications already agreed.All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
520L0472 • Rev DA • October 2014 www.danfoss.com © Danfoss A/S, 2014
Products we offer:
• Bent Axis Motors
• Closed Circuit Axial PistonPumps and Motors
• Displays
• Electrohydraulic PowerSteering
• Electrohydraulics
• Hydraulic Power Steering
• Integrated Systems
• Joysticks and ControlHandles
• Microcontrollers andSoftware
• Open Circuit Axial PistonPumps
• Orbital Motors
• PLUS+1® GUIDE
• Proportional Valves
• Sensors
• Steering
• Transit Mixer Drives
Comatrolwww.comatrol.com
Schwarzmüller-Inverterwww.schwarzmueller-inverter.com
Turolla www.turollaocg.com
Valmovawww.valmova.com
Hydro-Gearwww.hydro-gear.com
Daikin-Sauer-Danfosswww.daikin-sauer-danfoss.com