on request is possible produce carbon parts with...

OVERVIEW 2019 The customization programme for Bentley ContinentalV8 GT / GTC / V8S - W12 GT / GTC / SPEED ( model 2012-15 )last update 05 / 2019

real size 1:1

Carbon fibre fine - standard

On request is possible produce carbon parts with another structure from our collection - mansory.com/carbon

THE OPTIONS FOR YOUR BENTLEY CONTINENTAL V8 GT / GTC / V8S - W12 GT / GTC / SPEED I MODEL 2012 - 15

*matte coating on request - All listed carbon fibre parts are produced from standard MANSORY Carbon fibre fine (T200), or like the same carbon fibre as OEM standard parts. Prices and technical specifications are subject to change without prior notice, errors reserved.All prices calculated net, ex works excluding VAT, without painting and modification work. © all copyrights by MANSORY Design & Holding GmbH General Terms and Conditions at www.mansory.com/gtc last update 05 / 2019 - page 1

505 802 021

505 802 012 505 802 012D

505 802 022 505 802 022D

Rear bumper I + diffuser with integrated OEM brake lightAir flow optimized rear bumper with integrated sport exhaust blinds from stainless steelPrimed rear bumper I with diffuser, visible carbon fibre without clear coat*Original mounting points

Front bumper + front lip I. Front bumper + front lip I. with distronicLift reducing front bumper with integrated:- LED daytime running lights splitter, visible carbon fibre without clear coat- Front lip I visible carbon fibre without clear coat / not visible carbon fibre*Original mounting points

Front bumper + front lip II.Front bumper + front lip II. with distronicLift reducing front bumper with integrated:- LED daytime running lights splitter, visible carbon fibre without clear coat- Front lip II with side flaps visible carbon fibre without clear coat / not visible carbon fibre*Original mounting points

505 802 031Rear bumper II + diffuser with integrated OEM brake lightAir flow optimized rear bumper with integrated sport exhaust blinds from stainless steelPrimed rear bumper II with diffuser visible carbon fibre without clear coat*Original mounting points



Side skirts2 parts set - left & rightnot visible carbon fibre side skirts with lip visible carbon fibre without clear coat

spliter for MANSORY front bumpervisible carbon fibre without clear coat compatible only with 505 802 012, 505 802 012D, 505 802 022 or 505 802 022D

Front fenders “B” with look of Flying spur2 parts set - left & right, original part “Flying B” included*original mounting points

505 595 002 505 102 941

505 131 022 505 131 002Optimized front fenders2 parts set - left & right, side panel, visible carbon fibre without clear coat*Original mounting points



Engine bonnet visible carbon fibre without clear coat

Engine bonnet, primedbonnet - not visible carbon fibre primedair outtakes - visible carbon fibre without clear coat

505 110 001

505 110 002

NEW engine bonnet visible carbon fibre without clear coat 505 110 011

NEW engine bonnet, primedbonnet - not visible carbon fibre primedair outtakes contour - visible carbon fibre without clear coat

505 110 012

Engine bonnet RACEvisible carbon fibre without clear coatPrimed engine bonnet RACEnot visible carbon fibreair outtakes visible carbon fibre without clear coat

505 110 021

505 110 022



505 102 351 505 102 331

505 102 332

505 102 341

505 102 342

505 00B OEM

Front grill mask exposed visible carbon fibre without clear coat

compatible only with original front bumper

Front grill mask MANSORY visible carbon fibre without clear coat

Front grill mask MANSORY primednot visible carbon fibre primed

compatible only with MANSORY front bumper

Front grill for mask B-sculpturevisible carbon fibre without clear coat

Front grill for mask B-sculpture primednot visible carbon fibre primed compatible only with MANSORY front bumper

Flying-B-sculpture( Original part - no discount ) compatible only with Front grill mask for B-sculpture (BFS 102 341 & BFS 102 342)

505 102 371

505 102 375

Front grill mask Race visible carbon fibre without clear coat

Front grill mask Race primednot visible carbon fibre primed

compatible only with MANSORY front bumper



505 830 841 555 830 841

505 830 845 555 830 845

505 830 851 555 830 851

505 830 855 555 830 855

Rear decklid spoiler for GT - carbonRear decklid spoiler for GTC - carbonvisible carbon fibre without clear coat

Rear decklid spoiler for GT - primedRear decklid spoiler for GTC - primedprimed not visible carbon fibre

Rear decklid spoiler II for GT - carbonRear decklid spoiler II for GTC - carbonvisible carbon fibre without clear coat

Rear decklid spoiler II for GT - primedRear decklid spoiler II for GTC - primedprimed not visible carbon fibre

505 830 861Aerofoilvisible carbon fibre without clear coat compatible only with GT

compatible only with GT

505 830 871Rear trunk lidwith integrated rear spoilervisible carbon fibre without clear coat

High performance wing for GTHigh performance wing for GTC3 parts set, (wing, foots) visible carbon fibre without clear coat

505 830 331 555 830 331



505 001 09Rear light carbon frame2 parts set - left & right,visible carbon fibre glossy*

505 001 99Head light carbon frame4 parts set - left & right,visible carbon fibre glossy*

505 522 201 505 522 211Carbon mirror housing LHDCarbon mirror housing RHD4 parts set - left & right,housing + foot,visible carbon fibre glossy*

505 565 101Cover of folding roofvisible carbon fibre without clear coat compatible only with GTC - Cabrio

compatible only with GTC - Cabrio

compatible only with GTC - Cabrio

505 555 101A-pillar covervisible carbon fibre without clear coat compatible only with GTC - Cabrio

508 530 751Side bar covers 6 parts setvisible carbon fibre without clear coat



505 102 841

505 102 851

Front add-on lip OEMLift reducing front lip for original front bumper, visible carbon fibre without clear coat compatible with V8 and W12

Splitter for OEM front bumper2 parts set - left & right,visible carbon fibre without clear coat compatible only with W12

505 802 881Replacement of original diffuservisible carbon fibre without clear coat compatible only for W12

Side skirt lips for OEM car2 parts set - left & rightvisible carbon fibre without clear coat compatible with V8 and W12

505 595 012



630 255 468 630 255 469

630 129 622

X-Pipe for W12X-Pipe for V8

Sport airfilterfull moulding, carbon edition, 2 pcs.

630 253 615 630 253 616

505 000 99

505 000 09

Sport mufflers W12Sport mufflers V8

V8 Engine carbon cover5 Part set conversion kitvisible carbon fibre glossy*

W12 Engine carbon cover3 Part set conversion kitvisible carbon fibre glossy*

630 255 460 630 255 466

630 255 461 630 255 465

Sport Exhaust System with manuel switch W12Sport Exhaust System with manuel switch V8left & right Sport Muffler with throttle control

Sport Exhaust System with remote control W12Sport Exhaust System with remote control V8left & right Sport Muffler with throttle control

BFS 250 050Electronic lowering moduleThe standard-lowering settings for Bentley are 30mm for the front axle and 20mm for the rear once.Fine adjustments of about +/- 20mm can be adjusted by manual turnscrew operation. To keep the suspension comfort drive themodule turns into original settings at a speed over 70 km/h by an automatic speed-control regulation. All moduls are TüV certificated and come with a standard PAP adaptor.



MANSORY Lowering Suspensionconsisting of: - 2 level adjusting rods front axle- 2 level adjusting rods rear axleLowering of approx 20-30 mm

With the MANSORY Lowering Suspension you have the optimal symbiosis of excellent ride comfort during normal driving and agile direct response during fast cornering.

The product described in the instructions has been developed, and manufactured under consideration of the necessary safety regulations, and is subject to quality checks. To guarantee flawless, safe function and to eliminate any risk to people or property, this product must be installed properly. Therefore installation should only be carried out by trained specialists, with the specific technical and specialist knowledge required for installation in a vehicle, and the necessary tools. For this, you must carefully read and understand the fitting instructions.

Before starting work, check that all parts which should be included are present.

- Raise the vehicle on a suitable lifting mechanism at the position points specified by manufacturer, considering the relevant safety guidelines.

- Take off the original connecting rods from the height sensors on the front and rear axles. - Put the connecting rod on the ball heads on the height level sensors and the holders. - Re-fit the wheels to the vehicle according to workshop instructions. - After installation of the connecting rod, no further adjustments should be made.

BGT 900 101MANSORY Lowering Suspension for Bentley Continental 2 level adjusting rods front axle, 2 level adjusting rods rear axleLowering of approx 20-30 mm

Front axle

Rear axle


THE RIMS FOR YOUR BENTLEY CONTINENTAL V8 GT / GTC / V8S - W12 GT / GTC / SPEED I 2012

V6 22 10 43 1220 S V6 22 10 43 1220 A V6 22 10 43 1220 B V6 22 10 43 1220 BG

Y8 22 10 30 112 SP

Y8 21 105 30 112 SP

FS13 22 10 30 112 PV.6 wheel ( Silver diamond cut )V.6 wheel ( Anthracite diamond cut )V.6 wheel ( Black diamond cut )V.6 wheel ( Black Glossy )

1pc., 10 x 22”, OS 43, with chrome / silver wheel cap

* price per piece* without tire

Tiresrecommended tyre site: 295/30/22Continental SP5

Y.8 wheel 22” ( Silver diamond cut )1pc., 10 x 22”, OS 30,with chrome/ silver wheel cap



M8 wheel 21” ( Silver diamond cut )1pc., 10,5 x 21”, OS 30,with chrome/ silver wheel cap


FS.13 spoke wheel, aluminium casted 22 inch polished1pc., 10 x 22” OS 35with chrome/ silver wheel cap




THE RIMS FOR YOUR BENTLEY CONTINENTAL V8 GT / GTC / V8S - W12 GT / GTC / SPEED I 2012

CS11 21 9 30 1230 S CS11 21 9 30 1230 A CS11 21 9 30 1230 B

CS11 22 105 42 1230 S CS11 22 105 42 1230 A CS11 22 105 42 1230 B CS11 22 105 42 1230 BG

CS.11 wheel 21 inch wheel- Diamond silver- Diamond anthracite- Diamond black

CS.11 wheel 22 inch wheel- Diamond silver- Diamond anthracite- Diamond black- Black glossy * price per piece* without tire

505 611 D05

505 611 D15

505 611 D10

Spacer kit Y.8, CS.10spacers wheel 5 mm RA, including screws, 2 parts setSpacer kit V.6spacers wheel 10 mm FA and 15 mm RA including screws, 4 parts setSpacer kit FS.13 spokewith spacers wheel 10 mm RA including screws, 2 parts set

CS10 21 105 30 112 S

CS10 22 10 30 112 S CS.10 wheel 21 inch ( Silver diamond cut )with black / silver wheel cap

1pc., 10.5 x 21” OS 30 Silver / fr. polished


CS.10 wheel 22 inch ( Silver diamond cut )1pc., 10 x 22” OS 30with chrome/ silver wheel cap * price per piece* without tire



THE INTERIOR OPTIONS FOR YOUR BENTLEY CONTINENTAL V8 GT / GTC / V8S - W12 GT / GTC / SPEED I 2012

505 395 351

505 395 355

Entrance panels illuminated MANSORY logo 2 parts set - left & right, high polished stainless steelwith white lighted MANSORY Logo

with blue lighted MANSORY Logo

505 351 441

505 351 445

505 351 444

Sport steering wheelwith MANSORY logo

leather/carbon

leather/wood

leather/leather

modification only, OE-part required

505 351 500Airbag coverCombination leather or alcantara, kinds of colours selectable. modification only, OE-part required

505 395 361

505 395 365

505 395 371Carbon entrance panels with MANSORY logo 2 parts set - left & rightvisible carbon fibrewith white lighted MANSORY Logo

with MANSORY Logo

Carbon inner entrance panels2 parts set - left & right,visible carbon fibre without clear coat

505 300 001Complete trim interior set in carbon fibreinstrument panel, co-driver board, middle console front 2-parts, middle console rear 2-parts, ashtray cover front and rear, jalousie front and behind, cover for light system frontkinds of colour selectable


THE INTERIOR PROGRAMME FOR YOUR BENTLEY CONTINENTAL V8 GT / GTC / V8S - W12 GT / GTC / SPEED I 2012

505 367 758 505 367 127 505 368 758

505 390 000

Floor mats4-parts set - for front / rear foot area left / rightavailable with MANSORY logo stitching available with leather or wild leather border

Pedal Set3-parts, footrest, accelerate- and break pedals with MANSORY logo

aluminium punched

Trunk cover matwith MANSORY logo stitchingavailable with leather or wild leather border

Case for glassesvarious colors and materials avaiable modification only, OE-part required

505 363 011Gearshift leverdesigned gear shift levervisible carbon fibre without clear coat

505 350 011Shift paddles, 2 parts set - left & right, GT/GTC,

various colors and materials avaiable


THE INTERIOR PROGRAMME FOR YOUR BENTLEY CONTINENTAL V8 GT / GTC / V8S - W12 GT / GTC / SPEED I 2012

505 393 755 505 393 751Wood cover - seat rear panel modification only, OE-part required

Carbon cover - seat rear panel modification only, OE-part required

505 393 551Cover - seat side panel modification only, OE-part required

505 300 000MANSORY Individualized Interior Kitexclusive wooden trims or any mixed special material inlays, fine leather handmade by experienced master upholsterers who only use selected skins from tanneries that meet our high quality demands.kinds of color selectable

on request is possible produce carbon parts with...

Documents