onga 1320 pool distguide - hon · pdf filefor the discerning buyer who does not want to...
TRANSCRIPT
Innovative Products. Inspired People.
DistributorCatalogue
Pool Pumps
Pool Pump Nomenclature
2
PP OOO S A* XX
SF 55 0 1 00
Pump (PP)
MP Max-E-Pro
SF SilentFlo
PPP Pantera
LTP Leisuretime
Variations (XX)
As standard productscovered by the first six orseven digits require newvariations, the last twodigits will be incrementedand recorded.
e.g. A special lead orpackaging requirement.
Output (000)
N x 10 = Nominal watts
e.g. 55 = 55075 = 750110 = 1100150 = 1500
* Where N = - Three digit number for
pumps > 1000 Watts
- Two digit number for pumps < 1000 Watts
No company offers your sales team awider range of pumps than PentairWater. We help you cover every nichein the market, from low cost aboveground pools through to pumps tosatisfy the needs of your mostdiscerning customers for their largeresidential pools.
Also included in our range are pumpsfor solar applications, small commercialpool installations, and high pressurepool pumps for swim spas and in-floorcleaning systems.
Each pump has been designed withbest possible efficiency in mind... Approval (A)
0 None
1 Australia / New Zealand
2 GS
3 CE
4 Korean
5 UL
* Not used for LTP/PPPPower supply (S)
0 230V, 50Hz, 10 Amp1 230V, 50Hz, 15 Amp2 220V, 60Hz, 10 Amp3 220V, 60Hz, 15 Amp4 400V, 50Hz
Distributor Catalogue. Commercial in confidence. Pentair Water Pty Ltd account customers only.© information contained here-in remains the property of Pentair Water Pty Ltd. Any reproduction, display, publication,
modification or distribution is strictly prohibited without the prior written permission of Pentair Water Pty Ltd.Disclaimer Every endeavour has been made to publish the correct details in this data sheet. No responsibility will be
taken for errors, omissions or changes in product specifications. Pentair Water reserves the right to change specifications
Selection Chart
3
Pool Volume (litres)
0 20000 40000 60000 80000 100000 120000 140000 160000 180000 200000 220000
MP2200MP1500MP1100MP930MP730
SF1500SF1100SF750SF550
PPP1500HPPP1500PPP1100PPP750PPP550
LTP1100LTP750LTP550LTP400
Onga Leisuretime
Onga Pantera
Onga SilentFlo
Sta-Rite Max-E-Pro
Contents
Page
Sta-Rite Max-e-Pro 4
Onga SilentFlo 7
Onga Pantera 10
Onga Leisuretime 13
Pump Installation 16
Pump Troubleshooting 18
Distributor Catalogue. Commercial in confidence. Pentair Water Pty Ltd account customers only.© information contained here-in remains the property of Pentair Water Pty Ltd. Any reproduction, display, publication,
modification or distribution is strictly prohibited without the prior written permission of Pentair Water Pty Ltd.Disclaimer Every endeavour has been made to publish the correct details in this data sheet. No responsibility will be
taken for errors, omissions or changes in product specifications. Pentair Water reserves the right to change specifications
Upper limit based on a 6 hour turnover, operating at 8m total head.Lower limit based on a 4 hour turnover, operating at approximately 15m total head.
For the discerning buyer who does not want to sacrificequality or performance, the Sta-Rite Max-E-Pro rangeof pool pumps set the standard. This pump series wasdesigned to make sure your pool setting is all about funand relaxation - not the equipment that runs it.
The heavy duty motor is specifically designed to offerextended life and quiet operation. The pump end isprecision moulded from industrial grade materials forcorrosion resistance. The impeller is designed for highefficiency providing economical running costs.
Performance, quality, designed to last, these are the features you want and the Max-E-Pro delivers. The Max-E-Pro is ideally suited to swimming pools,swim spas and pools with in-floor cleaning systems.
• High end swimming pools
• Swim spa
• Pools with In-floor cleaningsystems
Max-E-Pro Pool Pump
Features
Quiet Heavy-Duty Motor
Elevated Motor
Stainless Steel Motor Shaft
Quick-Lock Lid, with permanentlylubricated o-ring
Integrated 50mm Barrel Unions
Thermoplastic Casing & Internals
Electrical Approvals
Benefits
Reliability and quality are integral benefits of this continuously rated motor.Low noise levels result in peaceful pump operation.
Designed to dampen sound and vibration also keeping ground moisture away from themotor extending the life of your pump.
Extending the life of the pump shaft by utilising corrosion resistant Stainless Steel.
Quick and easy routine maintenance. You do not require tools to access the strainer basketand with the clear lid you can check at a glance when cleaning is needed.
Quick and easy to install, creating a perfect seal and the ability to remove the pump without flexing the pipework.
Pool water can become corrosive if not checked regularly or maintained properly and by using the latest in technology to manufacture precision parts out of high quality material the Max-E-Pro stands up to the task.
Rest easy knowing your Max-E-Pro pool pump has passed all stringent AustralianStandards AS/NZS 3350 for safety and is approved for installation within the wetted zone of the pool area. Approvals Q98344, Q99350.
Typical Applications
4
Distributor Catalogue. Commercial in confidence. Pentair Water Pty Ltd account customers only.© information contained here-in remains the property of Pentair Water Pty Ltd. Any reproduction, display, publication,
modification or distribution is strictly prohibited without the prior written permission of Pentair Water Pty Ltd.Disclaimer Every endeavour has been made to publish the correct details in this data sheet. No responsibility will be
taken for errors, omissions or changes in product specifications. Pentair Water reserves the right to change specifications
410
260
350 370**
SuctionDischarge
13mm Dia
270
525
A
Hea
d (m
etre
s)
25
20
15
10
5
00 100 200 300 400 500 600 700
MP1100MP930MP730 MP1500 MP2200
5
Max-E-Pro Pool Pump
MaterialsComponent Material
Pump Casing: 30% Glass Filled Polypropylene
Impeller: 30% Glass Filled Polypropylene
Baffle: 40% TF Polypropylene
Diffuser: 20% Glass Filled ABS
Yoke: 20% Glass Filled ABS
Drain Plug: Polypropolene
Shaft Sleeve: 20% Glass Filled Polycarbonate
Motor Shaft: 303 Stainless Steel
End Shield: Enamel Painted Aluminium
Hair & Lint Pot O-Ring: Low Friction Nitrile
Hair & Lint Pot Lid: Polycarbonate
Casing O-Ring: Nitrile
Barrel Union O-Ring: Nitrile
Barrel Union: ABS
Cord/Plug: Approved to AS/NZS 3112
Pump Dimension APump Model MP750 MP930 MP1100 MP1500 MP2200
Single Phase 650 650 650 650 695
3 Phase 650 650 650 650 670
Note: unless otherwise specified, all dimensions in mm. Fixing slots accept 10-13mm fasteners180mm minimum clearance required for cooling and servicing from motor cowl.
Disclaimers Every endeavour has been madeto publish the correct details in this data sheet.No responsibility will be taken for errors,omissions or changes in product specifications.All performance data taken at sea level.
Mechanical seal, 3/4” Type 6Flexible Bellows: Nitrile
Stationary Face: Ceramic
Rotating Face: Carbon
Spring: 18-8 Stainless Steel
Dimensional DiagramPump Discharge and Suction Ports have Dual Purposeconnections. 50mm BSP Fi threads (internal) and also suppliedwith the complete pump, Unions to suit 50mm UPVC pipe.(Spare Part Barrel Union No: PKG 188)
**Additional clearance 160mm for removal of strainer basket
175
230
285
Pump Performance Chart
Distributor Catalogue. Commercial in confidence. Pentair Water Pty Ltd account customers only.© information contained here-in remains the property of Pentair Water Pty Ltd. Any reproduction, display, publication,
modification or distribution is strictly prohibited without the prior written permission of Pentair Water Pty Ltd.Disclaimer Every endeavour has been made to publish the correct details in this data sheet. No responsibility will be
taken for errors, omissions or changes in product specifications. Pentair Water reserves the right to change specifications
Pump Motor Supply Phase Full Load Locked Capacitor Thermal Insulation SpeedModel power Voltage current Rotor current protection cutout class (2 pole)Abbreviation P1 P2 FLA LRA
Unit of Measure Watt Watt V n Amp Amp µF ºC rpm
Model Data
MP730100 850 640 230 1 4.1 19 20 150/ Auto F 2800MP930100 940 730 230 1 4.4 19 20 150 / Auto F 2800MP1100100 1300 1000 230 1 6.5 40 30 150 / Auto F 2800MP1108100 1230 950 400 3 2.7 23 - Ext OL F 2800MP1500100 1710 1320 230 1 9.0 40 30 150 / Auto F 2800MP1508100 1750 1350 400 3 3.5 23 - Ext OL F 2800MP2201100 2020 1550 230 1 11.6 65 40 150 / Manual F 2800MP2208100 2130 1640 400 3 4.3 38 - Ext OL F 2800
Pump Run coil Start coil Connection IP Sound Bearing Max Working Max water Min water Max workingModel resistance resistance (3 Phase) Rating Power Level temp rating temp temp temp pressureAbbreviation SPL
Unit of Measure Ohms Ohms dBA ºC ºC ºC ºC kPa
MP730100 3.43 6.18 - IP55 64 120 50 35 5 360MP930100 3.43 6.18 - IP55 62 120 50 35 5 360MP1100100 1.51 3.63 - IP55 68 120 50 35 5 360MP1108100 6.92 6.59 Star IP55 69 120 50 35 5 360MP1500100 1.51 3.63 - IP55 69 120 50 35 5 360MP1508100 6.92 6.59 Star IP55 72 120 50 35 5 360MP2201100 0.95 1.94 - IP55 72 120 50 35 5 360MP2208100 3.96 3.62 Star IP55 73 120 50 35 5 360
6
Max-E-Pro Pool Pump
Model 3D 3E 3F 3G 3H
PN Single Phase MP730100 MP930100 MP1100100 MP1500100 MP2201100
PN 3 Phase - - MP1108100 MP1508100 MP2208100
Description 730W (1HP) 930W (1HP) 1100W (1HP) 1500W (2HP) 2200W (3HP)
Item Description Qty Part number1 Motor - 1 Phase 1 801009 801009 800563 800563 800564
Motor - 3 Phase 1 - - 801366 800565 800565
2 Screw 4 702594K 702594K 702594K 702594K 702594K
3 Motor Pad 1 See item 22
4 Water Slinger 1 c/w motor
5 Seal Plate 1 C203-194PSS C203-194PSS C203-194PSS C203-194PSS C203-194PSS
6 O-ring - Body 1 U9-228A U9-228A U9-228A U9-228A U9-228A
7 Shaft Seal 1 700270 700270 700270 700270 700270
8 Clamp Knob 1 WC36-22 WC36-22 WC36-22 WC36-22 WC36-22
9 Clamp 1 C19-37A C19-37A C19-37A SRC19-37A SRC19-37A
10 Impeller 1 C105-238PPB C105-238PRB C105-238PSB C105-238PLBAB C105-238PHAB
10A Impeller Screw 1 - - 37337-6080 37337-6080 37337-6080
11 Diffuser 1 C1-271P1 C1-271P1 C1-271P1 C1-271P C1-271P
12 O-ring - Diffuser 1 U9-374 U9-374 U9-374 U9-374 U9-374
13 Lockwasher 5 U43-21SS U43-21SS U43-21SS U43-21SS U43-21SS
14 Screw - Diffuser 5 U30-542SS U30-542SS U30-542SS U30-922SS U30-922SS
15 Tank Body Assembly 1 17307-0110W 17307-0110W 17307-0110W 17307-0110W 17307-0110W
16 Trap Cover incl. #17 1 17307-0111S 17307-0111S 17307-0111S 17307-0111S 17307-0111S
17 O-ring only - Trap Cover 1 35505-1440 35505-1440 35505-1440 35505-1440 35505-1440
18 Basket 1 C8-58P C8-58P C8-58P C8-58P C8-58P
19 Drain Plug & O-ring 2 800405 800405 800405 800405 800405
20 Screw - Base 2 U30-918SS U30-918SS U30-918SS U30-918SS U30-918SS
21 Washer - Base (Set of 20) 2 700312 700312 700312 700312 700312
22 Base with Motor Pad 1 C104-79P C104-79P C104-79P C104-79P C104-79P
23 Union Kit 1 PKG 188 PKG 188 PKG 188 PKG 188 PKG 188
NS Insert - Stainless Steel 1 17350-0001 17350-0000 17350-0001 17350-0001 17350-0001
NS Impeller screw O-ring 1 - - SR35505-1426 SR35505-1426 SR35505-1426
Items with suffix Kare packaged fordisplay
Distributor Catalogue. Commercial in confidence. Pentair Water Pty Ltd account customers only.© information contained here-in remains the property of Pentair Water Pty Ltd. Any reproduction, display, publication,
modification or distribution is strictly prohibited without the prior written permission of Pentair Water Pty Ltd.Disclaimer Every endeavour has been made to publish the correct details in this data sheet. No responsibility will be
taken for errors, omissions or changes in product specifications. Pentair Water reserves the right to change specifications
Service Parts
NS Not Shown
7
Pentair Water answers the latest issues inthe Swimming Pool Industry with therelease of the SilentFlo range of pumps.
These are the quietest and most efficientpumps available, to minimise the cost andmaximise the enjoyment of pool ownership.
SilentFlo Pool Pump
Features Benefits
Your customers will be able to run this pump at night, withoutdisturbing the neighbours. This allows them to take advantage of low cost off-peak tariffs.
Minimises running costs for your customers - more turnovers for less dollars
Even quieter operation, and minimises pump corrosion by keeping it out of the water
Extends the life of the pump by reducing corrosion
Minimises the maintenance requirement by extending the time between strainer basket clean outs
Quick and easy to install, while allowing pump removal without flexing pipework
Allows piping flexibility - threaded connections allow for permanentinstallation - service is still possible by removing the motor and yokefrom the casing
Total corrosion resistance for long life and peace of mind
The SilentFlo range of pool pumps have passed all the requirements ofAS/NZS 60335.2.41:2004 for safety, and is approved for installationwithin the wetted zone of the pool area
Easy servicing, no lost fasteners
Extremely quiet hydraulic design
Extremely efficient hydraulicdesign
Elevated base - further dampenssound and vibration, and keepsthe pump above sitting water
Stainless Steel motor shaft
Large volume strainer basket
Included 50mm barrel unions
Dual connections: 50mm threador 50mm barrel unions
Thermoplastic casing andhydraulic parts
Electrical approvals
Captive bolts
• Pools from 20,000 litres up to130,000 litres.
• High quality pools where quietoperation is a must.
• Pools where high efficiency isrequired.
Typical Applications
Distributor Catalogue. Commercial in confidence. Pentair Water Pty Ltd account customers only.© information contained here-in remains the property of Pentair Water Pty Ltd. Any reproduction, display, publication,
modification or distribution is strictly prohibited without the prior written permission of Pentair Water Pty Ltd.Disclaimer Every endeavour has been made to publish the correct details in this data sheet. No responsibility will be
taken for errors, omissions or changes in product specifications. Pentair Water reserves the right to change specifications
Pump Motor Supply Phase Full Locked Capacitor Thermal Insulation SpeedModel power Voltage Load Rotor protection class (2 pole)
current current cutoutAbbreviation P1 P2 FLA LRA
Unit of Measure Watt Watt V n Amp Amp µF ºC rpm
SilentFlo Pool Pump
Dimension TablePump Model SF550 SF750 SF1100 SF150
A 595 595 610 650
20
15
10
5
00 100
SF550100 SF750100 SF1100100
SF1500100
200 300Flow (litres/minute)
Hea
d (m
etre
s)
400 500 600
Disclaimers Everyendeavour has beenmade to publish thecorrect details in thisleaflet. No responsibilitywill be taken for errors,omissions or changes inproduct specifications.All performance datataken at sea level.
Pump Performance Chart
Suitable for pumping clean non-aggressive liquids without solids or fibres in suspension.
MotorType: TEFC 2 poleThermal overload: Internal, automatic resetTemperature rise: Class FVoltage: 230V +/- 10%Frequency: 50Hz
Line Drawings
Model Data
SF550100 580 400 230 1 2.6 14 25 150 F 2800
SF750100 690 485 230 1 3.0 14 25 150 F 2800
SF1100100 1020 715 230 1 4.5 22 25 150 F 2800
SF1500100 1540 1075 230 1 6.7 28 30 150 F 2800
Unless otherwise specified, all dimensions in mm.
Fixing holes accept 12mm fasteners.
8
Materials
Pump Casing Reinforced Polypropylene 40% Glass FilledImpeller Polyphenylene EtherDiffuser Polypropylene HP TF 40%Yoke Polypropylene 40% Glass FilledDrain plugs PolypropyleneMotor shaft SS 303End shield Cast AluminiumStrainer basket High Impact PolystyreneStrainer basket o-ring Low friction nitrileStrainer pot lid Makrolon PolycarbonateBarrel unions Acrylonitrile Butadiene Styrene (ABS)Base Copolymer PolypropyleneSeal bellows NitrileSeal stationary face Aluminium oxideSeal rotating face CarbonSeal Spring SS 316Cord/Plug Approved to AS/NZS 3112
Pump Run Start Sound IP Bearing Bearing Max Max Min MaxModel coil coil Pressure Rating type temperature Working water water working
resistance resistance Level rating temp temp temp pressureAbbreviation SPL
Unit of Measure Ohms Ohms dB(A) ºC ºC ºC ºC kPa
SF550100 4.64 5.69 56 IP55 6203 120 50 35 5 360
SF750100 4.64 5.69 56 IP55 6203 120 50 35 5 360
SF1100100 3.22 5.69 59 IP55 6203 120 50 35 5 360
SF1500100 1.99 3.78 61 IP55 6203 120 50 35 5 360
Component Material
Distributor Catalogue. Commercial in confidence. Pentair Water Pty Ltd account customers only.© information contained here-in remains the property of Pentair Water Pty Ltd. Any reproduction, display, publication,
modification or distribution is strictly prohibited without the prior written permission of Pentair Water Pty Ltd.Disclaimer Every endeavour has been made to publish the correct details in this data sheet. No responsibility will be
taken for errors, omissions or changes in product specifications. Pentair Water reserves the right to change specifications
9
SilentFlo Pool Pump
Service Parts
Distributor Catalogue. Commercial in confidence. Pentair Water Pty Ltd account customers only.© information contained here-in remains the property of Pentair Water Pty Ltd. Any reproduction, display, publication,
modification or distribution is strictly prohibited without the prior written permission of Pentair Water Pty Ltd.Disclaimer Every endeavour has been made to publish the correct details in this data sheet. No responsibility will be
taken for errors, omissions or changes in product specifications. Pentair Water reserves the right to change specifications
Model SF550100 SF750100 SF1100100 SF1500100
Part Number SF550100 SF750100 SF1100100 SF1500100
Description 550W 7500W 1100W 1500W
Item Description Qty Part number1 Motor 1 801418 801418 801419 801420
2 Slinger1 1 801429 801429 801429 801429
3 Seal Plate 1 C3-184P C3-184P C3-184P C3-184P
4 Shaft seal 1 801428 (single) 800900 (pack of 25)
5 Casing o-ring 1 1660500 1660500 1660500 1660500
6 Impeller 1 801424 801425 801426 801427
7 Diffuser2 1 801421 801422 801423 801423
8 Diffuser o-ring 1 801430 801430 801430 801430
9 Lint Pot lid 1 801432 801432 801432 801432
10 Barrel unions 2 PKG 188 PKG 188 PKG 188 PKG 188
11 Basket lid o-ring 1 801433 801433 801433 801433
12 Lint Pot 1 C8-58P C8-58P C8-58P C8-58P
13 Pump casing3 1 C176-58P C176-58P C176-58P C176-58P
14 Drain plug4 2 801434 801434 801434 801434
15 Base 1 C4-77P C4-77P C4-77P C4-77P
16 Motor pad 1 C35-45 C35-45 C35-45 C35-45
NS Fastener Kit 1 801431 801431 801431 801431
NS Motor bearing D.E. 1 6203-2RS 6203-2RS 6203-2RS 6203-2RS
NS Motor bearing N.D.E 1 6203-2RS 6203-2RS 6203-2RS 6203-2RS
NS Motor Capacitor 1 707157 707157 707157 707158
NS Fan Cowl (motor) 1 707152 707152 707155 707155
NS Fan (motor) 1 707153 707153 707156 707156
NS Terminal Box (motor) 1 707154 707154 707154 707154
1 Slinger comes in a pack of 102 Diffuser service pack includes o-ring3 Pump casing includes drain plugs, drain plug o-rings, basket, basket lid, lid o-ring4 Drain plug includes o-ring; comes in pack of 2NS Not Shown
Items with suffix K arepackaged for display
The Pantera pool pumps have beenspecifically designed to incorporatefeatures that will provide reliable andefficient pump operation.
The new technology wet end designintegrates a unique moulded end-shieldcover and lip seal protecting the motorfrom water damage making this rangeideal for in-ground or above ground pools.
Pantera Pool Pump
Features Benefits
Pantera Pool Pump Model PPP750
Standard industry practice to protect pool pump motors from water ingress isnormally only on two levels, a mechanical seal and flinger shaft sleeve. With over30 years experience selling into the pool industry, we know the more protectionyou give the motor, the better off you are and that s why we build five levels ofmotor protection into the Pantera range of pool pumps.
Incorporating an elevated mount into the pump design keeps moisture wellaway from the motor.
Extends the life of the pump shaft by utilising corrosion resistant stainless steel.
The hair and lint pot stops large particles from blocking the pump waterways.Having a larger than average lint pot means less time cleaning. Bymanufacturing the lint pot with a clear lid, it only takes a few seconds to check whether or not it is full.
Having a low friction o-ring on the lint pot means you only need to tighten the lidby hand. No tools are necessary and because you only tighten by hand,removing the lid is also a simple task.
Onga s unique 5 degree self-aligning barrel unions make pipe work connection a breeze.
Rest easy knowing your Pantera pool pump has passed all stringent AustralianStandards AS/NZS 3136:2001 for safety and is approved for installation withinthe wetted zone of the pool area. Approvals V00423, V02301, V02302.
5 levels of corrosionresistance
Elevated motor foot
Stainless steel motor shaft
Extra large hair and lint potwith see through lid
Low friction lint pot o-ring
Self aligning barrel unions
Electrical approvals
10
• Quality in-ground poolinstallations
• Above ground pools
Typical Applications
Distributor Catalogue. Commercial in confidence. Pentair Water Pty Ltd account customers only.© information contained here-in remains the property of Pentair Water Pty Ltd. Any reproduction, display, publication,
modification or distribution is strictly prohibited without the prior written permission of Pentair Water Pty Ltd.Disclaimer Every endeavour has been made to publish the correct details in this data sheet. No responsibility will be
taken for errors, omissions or changes in product specifications. Pentair Water reserves the right to change specifications
Pantera Pool Pump
Dimension TablePump A B C D E FModel (mm) (mm) (mm) (mm) (mm) (mm)
PPP550 630 487 121 185 288 290
PPP750 630 487 121 185 288 290
PPP1100 630 495 144 185 288 290
PPP1500 630 495 144 185 288 290
PPP1500H 630 495 144 185 288 314
25
20
15
10
5
00 100
550 750 11001500 1500H
200 300Flow (litres/minute)
Hea
d (m
etre
s)
400 500 600
Disclaimers Every endeavour has been made topublish the correct details in this leaflet. No responsibilitywill be taken for errors, omissions or changes in productspecifications. All performance data taken at sea level.
Operating Conditions
Pump Performance Chart
Fluid: Water
Maximum working pressure: 295 kPa
Water (Swimming Pool) temp range: 5ºC-35ºC
Ambient temperature: 50ºC maximum
Suitable for pumping clean non-aggressive liquids without solids or fibres in suspension.
MotorType: TEFC 2 pole continuously rotated
Nominal speed: 2800 rpm
IP rating: IP55
Insulation class: Class F
Thermal overload: Inbuilt auto reset
Temperature rise: Class B
Frequency: 50Hz*
Voltage: 230-240*
Bearing type: Deep groove ball bearing with
double contact lip seal
Bearing temperature rating: 150ºC
Materials
Pump casing: 20% Glass filled ABS
Impeller: PPP550 20% Glass filled polycarbonate
Impeller: PPP750-1500H 20% Glass filled ABS
Baffle: 20% Glass filled ABS
Diffuser: 20% Glass filled ABS
Yoke: 20% Glass filled ABS
Drain cap: Polypropylene
Shaft sleeve: Nylon
Motor shaft: 400 series stainless steel
End shield: Powder coated cast iron
Hair and lint pot O-ring: Low friction nitrile
Casing O-ring: Nitrile
Barrel union O-ring: Nitrile
Barrel union: ABS
Hair and lint pot lid: Polycarbonate
Cord/Plug: Approved to AS/NZS 3112
Flexible bellows: Nitrile
Stationary face: Ceramic
Rotating face: Carbon
Spring: 18-8 stainless steel
Line Drawings
* Some models also available in 60Hz, check your local Pentair Water office for price and availability.
*PVC Pipe to AS/NZS 1477. Union to suit metric PVC to ISO727 available upon request.
* dB(A) @ 1 metreGrey Row = Ceased Production
Model DataPump Motor Kw Supply Phase Full Locked Capacitor Sound Supply Net Packed CartonModel Nominal Voltage Load Rotor mfd Power Cord Weight Weight Dimensions
Current Current Level Length L x W x HUnit of Measure (hp) (A) (A) dBA* (m) (kg) (kg) (mm)
PPP550 0.55 (3/4) 240 1 2.5 8.5 10 62 2 10.5 12.5 610 x 190 x 305
PPP750 0.75 (1) 240 1 4.3 16 20 66 2 10.5 12.5 610 x 190 x 305
PPP1100 1.0 (11/4) 240 1 5.4 24 22 65 2 12 14 610 x 190 x 305
PPP1500 1.2 (11/2) 240 1 6.2 24 22 66 2 12 14 610 x 190 x 305
PPP1500H 1.5 (2) 240 1 8.2 38 40 68 2 16.5 18 670 x 225 x 345
Note: Dimension ‘E’ an additional 160mm clearance height required above the pump to remove strainerbasket for maintenance and cleaning purposes.Unless otherwise specified, all dimensions in mm. Fixing holes accept 8mm fasteners.
11
Mechanical seal, 3/4 type 6 (PPP550 1/2”)
Component Material
Distributor Catalogue. Commercial in confidence. Pentair Water Pty Ltd account customers only.© information contained here-in remains the property of Pentair Water Pty Ltd. Any reproduction, display, publication,
modification or distribution is strictly prohibited without the prior written permission of Pentair Water Pty Ltd.Disclaimer Every endeavour has been made to publish the correct details in this data sheet. No responsibility will be
taken for errors, omissions or changes in product specifications. Pentair Water reserves the right to change specifications
Pantera Pool Pump
Model PPP550 PPP750 PPP1100 PPP1500 PPP1500H
Part number PPP550 PPP750 PPP1100 PPP1500 PPP1500H
Description 0.55kW 0.75kW 1.1kW 1.5kW 1.5kW
Ceased Production July 2006
Item Description Qty Part number1 Motor 1 801209 801210 801211 801211 801212
2 Base 1 304100 304100 304100 304100 304420
3 Screw M6 x 16mm CSK 2 703875 703875 703875 703875 703875
4 Lip Seal 1 606700 606700 606700 606700 606700
5 Nut 5/16” BSW S/S (Pack 12) 4 800163K 800163K 800163K 800163K 800163K
6 Yoke 1 305370 305370 305370 305370 305370
7 Screw (Pack 10) 4 800165 800165 800165 800165 800165
8 Baffle 1 302060K 305300 305300 305300 305300
9 Mechanical Seal Kit (Inc.9a,b,c) 1 800582K 800887K 800887K 800887K 800887K
9a Mechanical Seal (Pack 25) 1 800901 800900 800900 800900 800900
9b O-ring Casing 1 702206K 702206K 702206K 702206K 702206K
9c Shaft Sleeve Assembly 1 800894K 800895K 800895K 800895K 800895K
10 Diffuser 1 303460K 305460 303460K 303460K 303460K
11 Impeller 1 510803 507530K 506840K 506820 507650
12 Separator Plate 1 408610 408730 408730 408730 408730
13 Barrel Union Assy (Incl o-ring) 2 801213 801213 801213 801213 801213
14 Casing & Bowl 1 305390 305390 305390 305390 305390
15 Basket Strainer 1 302310 302310 302310 302310 302310
16 O-ring - Lid (Pack of 4) 1 702208K 702208K 702208K 702208K 702208K
17 Lid & O-ring Kit (Incl. Item 16) 1 800897K 800897K 800897K 800897K 800897K
18 Screw 5/16” BSW S/S (Set/12) 4 800903K 800903K 800903K 800903K 800903K
19 O-ring - Barrel Union (Pack of 4) 2 702193K 702193K 702193K 702193K 702193K
20 Cap - Priming 1 504605 504605 504605 504605 504605
NS Flinger - shaft (not shown) 1 607930 607930 607930 607930 607930
Items with suffix K arepackaged for display
Service Parts
12
Distributor Catalogue. Commercial in confidence. Pentair Water Pty Ltd account customers only.© information contained here-in remains the property of Pentair Water Pty Ltd. Any reproduction, display, publication,
modification or distribution is strictly prohibited without the prior written permission of Pentair Water Pty Ltd.Disclaimer Every endeavour has been made to publish the correct details in this data sheet. No responsibility will be
taken for errors, omissions or changes in product specifications. Pentair Water reserves the right to change specifications
NS - Not Shown
The range of Leisuretime pool pumps havebeen purposefully designed to providemaximum performance and corrosionresistance at a realistic cost.
Ideal for small to medium domesticswimming pools and solar pool heating.
Leisuretime Pool Pump
13
Features Benefits
Leisuretime Pool PumpModel LTP550
With IP55 protection from dust and water, your pump is preserved against theelements for many years and can be mounted outside. In addition, with a totallyenclosed fan cooled motor the entry of vermin will be reduced.
Rest easy knowing your Leisuretime pool pump has passed all stringentAustralian Standards AS/NZS 3136:2001 for safety and is approved forinstallation within the wetted zone of the pool area. Approvals V99108, V02301, V02302.
Incorporating an elevated mount into the pump design keeps moisture wellaway from the motor.
Unique double zinc plated cast iron endshield for better corrosion protectionextending the life of the pump.
Easy to clean large hair and lint pot with a clear lid so you can check at aglance whether or not it is full.
Having a low friction o-ring on the lint pot means you only need to tighten thelid by hand. No tools are necessary and because you only tighten by hand,removing the lid is also a simple task.
IP55 (TEFC) motor
Electrical approvals
Elevated motor foot
Double coated endshield
Large hair and lint pot withsee through lid
Low friction lint pot o-ring
• Swimming pools from 20,000litres and up to 90,000 litres
• Solar heating circuits
• Above ground pools
Typical Applications
Distributor Catalogue. Commercial in confidence. Pentair Water Pty Ltd account customers only.© information contained here-in remains the property of Pentair Water Pty Ltd. Any reproduction, display, publication,
modification or distribution is strictly prohibited without the prior written permission of Pentair Water Pty Ltd.Disclaimer Every endeavour has been made to publish the correct details in this data sheet. No responsibility will be
taken for errors, omissions or changes in product specifications. Pentair Water reserves the right to change specifications
Leisuretime Pool Pump
Dimension TablePump A B C D E FModel (mm) (mm) (mm) (mm) (mm) (mm)
LTP400 556 454 91 152 254 260
LTP550 578 454 91 152 254 260
LTP750 578 454 91 152 254 260
LTP1100 587 448 91 152 254 260
25
20
15
10
5
00 100
400 550 750 1100
200 300Flow (litres/minute)
Hea
d (m
etre
s)
400 500
Disclaimers Every endeavour has been made topublish the correct details in this leaflet. No responsibilitywill be taken for errors, omissions or changes in productspecifications. All performance data taken at sea level.
Operating Conditions
Pump Performance Chart
Fluid: Water
Maximum working pressure: 270 kPa
Water (Swimming Pool) temp range: 5ºC-35ºC
Ambient temperature: 50ºC maximum
Suitable for pumping clean non-aggressive liquids without solids or fibres in suspension.
MotorType: TEFC 2 pole
Nominal speed: 2800 rpm
IP rating: IP55
Insulation class: Class F
Thermal overload: Internal
Temperature rise: Class B
Frequency: 50Hz*
Voltage: 230-240*
Bearing type: Deep groove ball bearing with
double contact lip seal
Bearing temperature rating: 150ºC
Materials
Pump casing: Glass filled ABS
Clacker: Polypropylene
Impeller: Glass filled ABS
Baffle: Glass filled ABS
Drain plug: Polypropylene
Diffuser: Glass filled ABS
Basket: HD polyethylene
Shaft sleeve: Nylon
Motor shaft: K-1137 steel
End shield: Double zinc coated cast iron
Hair and lint pot O-ring: Nitrile
O-rings: Low friction nitrile
Barrel unions: ABS
Hair and lint pot lid: Polycarbonate
Cord/Plug: Approved to AS/NZS 3112
Flexible bellows: Nitrile
Stationary face: Ceramic
Rotating face: Carbon
Spring: 304 stainless steel
Line Drawings
* dB(A) @ 1 metre
Model DataPump Motor Kw Supply Phase Full Full Capacitor Sound Supply Net Packed CartonModel Voltage Load Rotor mfd Power Cord Weight Weight Dimensions
Current Current Level Length L x W x H
Unit of measure (hp) V (A) (A) dBA* (m) (kg) (kg) (mm)
LTP400 0.4 (1/2) 230 1 2.7 10 12 60 2 8 10 580 x 185 x 315
LTP550 0.5 (3/4) 230 1 3.5 17 20 59 2 8 10 580 x 185 x 315
LTP750 0.75 (1) 230 1 4.3 17 20 64 2 10 12 580 x 185 x 315
LTP1100 1.1 (11/2) 230 1 5.4 23 22 65 2 10 12 615 x 210 x 305
Note: Dimension ‘E’ an additional 160mm clearance height required above the pump to remove strainerbasket for maintenance and cleaning purposes.
Unless otherwise specified, all dimensions in mm.
Fixing holes accept 8mm fasteners.
*PVC Pipe to AS/NZS 1477. Union to suit metricPVC to ISO727 available upon request.
14
Component Materials
Mechanical seal, 1/2” type 6 (LTP1100 = type 6 3/4”)
Distributor Catalogue. Commercial in confidence. Pentair Water Pty Ltd account customers only.© information contained here-in remains the property of Pentair Water Pty Ltd. Any reproduction, display, publication,
modification or distribution is strictly prohibited without the prior written permission of Pentair Water Pty Ltd.Disclaimer Every endeavour has been made to publish the correct details in this data sheet. No responsibility will be
taken for errors, omissions or changes in product specifications. Pentair Water reserves the right to change specifications
15
Leisuretime Pool Pump
Model LTP400 LTP550 LTP750 LTP1100
Part number LTP400 LTP550 LTP750 LTP1100
Description 0.4kW 0.55kW 0.75kW 1.1kW
Item Description Qty Part number1 Motor 1 801215 801215 801215 800644
2 Baffle 1 302060K 302060K 302060K 303350K
3 Mechanical Seal Kit (Inc. 3a,b,c) 1 800582K 800582K 800582K 800887K
3a Mechanical Seal (Pack 25) 1 800901 800901 800901 800900
3b O-ring Casing 1 702206K 702206K 702206K 702206K
3c Shaft Sleeve Assembly 1 800894K 800894K 800894K 800895K
4 Diffuser 1 302200K 302200K 302190K 303460K
5 Impeller 1 504593K 510803 504823K 506840K
6 Casing & Bowl Assy. (Incl.7,8,9,10,11) 1 800410 800410 800410 800905
7 Plug - Drain 1 504605 504605 504605 504605
8 Guard - Finger 1 508210 508210 508210 508210
9 Basket Strainer 1 302310 302310 302310 302310
10 O-ring - Lid (Pack of 4) 1 702208K 702208K 702208K 702208K
11 Lid & O-ring (Screw Type) 1 800897K 800897K 800897K 800897K
12 Clacker Assembly 1 800904K 800904K 800904K -
13 O-ring - Barrel Union (Pack of 4) 2 702193K 702193K 702193K 702193K
14 Barrel Union Assy (Incl. O-ring) 1 801213 801213 801213 801213
15 Barrel Union Assy (Complete) 1 800408 800408 800408 801213
16 Bolt 5/16”W (Set/12) w/ Washers 4 800903K 800903K 800903K 800903K
17 Nut 5/16”W S/S (Set/12) 4 800163K 800163K 800163K 800163K
18 Base & Screws Kit 1 304100 304100 304100 304100
Items with suffix K arepackaged for display
Service Parts
Distributor Catalogue. Commercial in confidence. Pentair Water Pty Ltd account customers only.© information contained here-in remains the property of Pentair Water Pty Ltd. Any reproduction, display, publication,
modification or distribution is strictly prohibited without the prior written permission of Pentair Water Pty Ltd.Disclaimer Every endeavour has been made to publish the correct details in this data sheet. No responsibility will be
taken for errors, omissions or changes in product specifications. Pentair Water reserves the right to change specifications
Figure 1
Static Suction Lift
1. Determine correct flow rate for optimum filtration,sanitation and heater operation.Based on a four hour turnover, use the following formula:
Required Flow Rate (lpm) = Pool Volume (litres) / 240
2. Determine suction head at that flow rate¥ Static head¥ Pipe friction¥ Equipment loss - Main drains
- Skimmers- Automatic cleaners (not usually
factored in at this stage)
If there is a suction lift (ie. static head - pipe friction -equipment loss < 0), apply a capacity multiplier to pump capacity:
Suction
Static Head+
Pipe Friction+
Equipment Loss=
Total Suction
Pump Selection Steps
16
1.5m 90
3.0m 80
4.6m 70
6.1m 60
3. Determine delivery head at the required flow rate:¥ Static head¥ Pipe friction¥ Equipment loss - Filter, multiport valve
- Heater, solar tubes- Returns
4. Determine total head(delivery head + suction head)
5. Select the smallest pump that will meet the totalhead requirement at the required flow rate.
Pumpoperating
pointTotal headat requiredflow rate
Requiredflow rate
Flow (litres/minute)
Hea
d (m
etre
s)
Total suction head Rated capacity%
Distributor Catalogue. Commercial in confidence. Pentair Water Pty Ltd account customers only.© information contained here-in remains the property of Pentair Water Pty Ltd. Any reproduction, display, publication,
modification or distribution is strictly prohibited without the prior written permission of Pentair Water Pty Ltd.Disclaimer Every endeavour has been made to publish the correct details in this data sheet. No responsibility will be
taken for errors, omissions or changes in product specifications. Pentair Water reserves the right to change specifications
Pentair Water recommend the pump be mounted on a solid level, vibration free surface.
To maintain optimum performance from your pump, the suction pipe should be:
• Kept to the shortest length possible – place thepump as close to the water source as possible
• PVC or similar non-collapsible hose or pipe• All fittings must be airtight• Pipe should be equal to or larger than the diameter
of the suction port• Where possible install the pump below water level
To maintain optimum performance from your pump, the discharge pipe should be:
• Kept to the shortest possible length• Of adequate diameter to reduce friction losses –
avoid small pipes to maximise flow and pressureperformance
Pentair Water recommend the use of shut off valves insuction & discharge pipe to assist when maintenance isrequired. Closed loop systems or applications where thepump is installed vertically higher than the water sourcewill require an additional check valve or footvalve.
Electrical230 volt single phase motors are supplied as standardwith built-in thermal overload protection and aredesigned to plug directly into a 10 amp domestic powersupply to local electrical authority specifications(2.2kW,2.4kW - 15Amp Plug).
Caution: Pumps fitted with 415 volt three phase electricmotors must be wired through a contractorincorporating quick trip type thermal overloads.Direction of rotation must be checked by switchingpower on momentarily and observing motor rotation. If the direction is not correct as per motor label have aqualified electrician make the change.
Recommended routine maintenance• Check seal, if leaking replace with genuine Pentair Water service parts.• Regularly check o-rings and replace if worn or leaking• Keep strainer basket free of debris by checking it regularly.
Ensure that your self-priming pump is filled with water before operating. NEVER run dry! Running pump dry may damage seals, causing leakage and flooding not covered by Pentair Water warranty.
Pump installation
17
Common Problems - Air Lock
Common Problems - Air in System
Air Lock
Air in system
Allow 4 times the pipediameter between thesuction port and thefirst fitting
Fitting too close tosuction of pump
Refer to owners manual for complete installation instruction.
✘not recommended
✘not recommended
Distributor Catalogue. Commercial in confidence. Pentair Water Pty Ltd account customers only.© information contained here-in remains the property of Pentair Water Pty Ltd. Any reproduction, display, publication,
modification or distribution is strictly prohibited without the prior written permission of Pentair Water Pty Ltd.Disclaimer Every endeavour has been made to publish the correct details in this data sheet. No responsibility will be
taken for errors, omissions or changes in product specifications. Pentair Water reserves the right to change specifications
Symptom Cause Remedy
Pump doesn’t start.
No water frompump(Pump runs orhums, but deliversno water).
Pump runsintermittently.
Poor performance –slow pool turnover,or poor cleaningperformance.
Pump is leakingwater.
Should problems persist, contact your nearest Pentair Water service agent.
Trouble Shooting
18
No power supply.
Defective capacitor.
Motor defective.
Pump is blocked.
Pump is not primed.
Suction line is leaking.
Blockages in skimmer box orsuction line.
Valves closed.
Pool level below skimmer box.
Ambient temperature is too high -thermal cutout is operating.
Water temperature is too high.
Voltage is outside allowable limits(see specification).
Partially clogged leaf baskets.
Filter is blocked.
Suction line is leaking (allowing air into the suction line).
Pool is too far below the pump(suction lift situation)
Low voltage.
Pump is worn or damaged.
Casing bolts are not sufficientlytightened.
Mechanical seal is worn.
Ensure that pump is connected to a live outlet. Ensure that timeclock orcontroller is delivering power to the pump.
Check fuses and circuit breakers.
Replace the capacitor (electrical license required).
Check motor winding resistance against specification.
Disconnect the pump from the power outlet, and check the pump housing and discharge for foreign matter.
Ensure that pump body and suction line are filled with water before starting.
Check the suction line for leaks, especially at joints.
Check the skimmer box, and empty the leaf basket.
Check all valves on the filter, pump, and outlets.
Top up the pool, so that there is at least 100mm of water above the skimmer box entry.
Turn pump off until ambient cools.
Ensure that water temperature limits are observed.
Check voltage level being delivered, and correct where necessary.
Switch off the pump, and check both the skimmer box leaf basket and the pump suction leaf basket.
Check filter pressure gauge, and backwash or clean filter cartridge.
Check that a vacuum hose is not above the water surface.Check the suction line for leaks, especially at joints.
If the pump cannot be moved closer to the pool, a different pump may be required.
Check voltage at motor terminals, while the pump is running.
Replace worn components, and remove cause of abnormal wear.
Tighten casing bolts.
Replace seal, and remove cause of abnormal wear.
Distributor Catalogue. Commercial in confidence. Pentair Water Pty Ltd account customers only.© information contained here-in remains the property of Pentair Water Pty Ltd. Any reproduction, display, publication,
modification or distribution is strictly prohibited without the prior written permission of Pentair Water Pty Ltd.Disclaimer Every endeavour has been made to publish the correct details in this data sheet. No responsibility will be
taken for errors, omissions or changes in product specifications. Pentair Water reserves the right to change specifications
L300
121A
070
6
Distributor Catalogue. Commercial in confidence. Pentair Water Pty Ltd account customers only.© information contained here-in remains the property of Pentair Water Pty Ltd. Any reproduction, display, publication,
modification or distribution is strictly prohibited without the prior written permission of Pentair Water Pty Ltd.Disclaimer Every endeavour has been made to publish the correct details in this data sheet. No responsibility will be
taken for errors, omissions or changes in product specifications. Pentair Water reserves the right to change specifications
Pacific Head OfficeAustralia Pentair Water Australia Pty Ltd
Notting Hill Victoria, AustraliaTel: +61 3 9574 4000 Fax: +61 3 9574 4088Email: [email protected]
Pentair Water New Zealand LtdPenrose Auckland New ZealandTel: +64 9 579 6254 Fax: +64 9 579 6497Email: [email protected]
Americas Pentair, Inc.Golden Valley, MinneapolisTel: +1 763 545 1730 Fax: +1 763 656 5400www.pentair.com
Europe Pentair Pumps S.p.AMilan, ItalyTel: +39 02/93.27.111 Fax: +39 02/93.59.51.54www.pentairpumps.it
Asia ChinaPentair Water ShanghaiShanghai, ChinaTel: +86 21 5877 7088 Fax: +86 21 5879 8758
IndiaPentair Water India Pvt. Ltd.Goa, IndiaTel: +91 832 288 3300 Fax: +91 832 288 3312
Pentair Water Australia Pty Ltd ACN 112 060 616
Pentair Water New Zealand Ltd ACN 157 6666