A Hilco Global CompanyVested in Your Success

31555 West Fourteen Mile Road, Suite 301Farmington Hills, Michigan 48334 USAPh 248-254-9999 • Fx 248-254-9995

www.hilcoind.com

Plastic Sheet & Extrusion Manufacturingand Support Equipment

Including Mixing, Blending, Extrusion & More

Assets no longer required in the continuing operations of PolyOne due to Plant Closure

Online Bidding Opens: Thursday, July 31st

• 11AM Local Time

Online Bidding Closes: Thursday, August 7th

Warsaw, Indiana

ONLINE AUCTION

To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)2

ONLINE AUCTIONHilcoTM IndustrialAssets no longer required in the continuing operations of

PolyOne due to Plant Closure

ONLINE BIDDINg OPENS

THURSDAY, JULY 31ST

BEGINNING AT 11AM LOCAL TIME

ONLINE BIDDINg CLOSES

THURSDAY, AUGUST 7TH

CHeCk www.HIlCoInd.Com For ClosInG tImes

PREVIEWMONDAY THRU WEDNESDAYAUGUST 4TH – 6TH

8AM TO 4PM LOCAL TIME to sCHedUle An eArlIer InspeCtIon, pleAse ContACt tIm pFIster At 847-313-4747 or emAIl tpFIster@HIlCoGlobAl.Com

ASSET LOCATION3454 N. DETROIT STWARSAW, IN 46582

DIRECTIONSFROM FORT WAYNE INTERNATIONAL AIRPORT: EXIT AIRPORT TO ARDMORE AVE , TURNLEFT ONTO LEESBURG RD, THEN RIGHT ONTO FLAUGH RD. TAKE US-30 W (APPROX. 35MILES). TAKE THE IN-15 EXIT TOWARD GOSHEN / WARSAW, TURN LEFT ONTO N. DETROIT ST.DESTINATION WILL BE ON THE RIGHT.

FURTHER INFORMATION• AN 18% BUYER'S PREMIUM WILL BE CHARGED ON ALL ASSETS. THE BUYER’S

PREMIUM WILL BE REDUCED TO 16% FOR PAYMENTS MADE BY MEANS OFCASH, CASHIER’S CHECK, COMPANY CHECK (WITH BANK LETTER OF GUARAN-TEE) OR WIRE TRANSFER WITHIN 48 HOURS OF SALE CLOSE. AUCTION WILL BECONDUCTED IN ENGLISH, ACCEPTING U.S. CURRENCY ONLY.

• REMOVAL DEADLINE IS AUGUST 22ND WITH HOURS OF REMOVAL BETWEEN 9AM TO 4PMMONDAY THRU FRIDAY. BUYERS WITH ITEMS LEFT ON SITE AFTER DEADLINE ARE SUBJECT TO FINES OF $500 PER DAY.

MACHINERY &  EQUIPMENT

TIM PFISTER 847-313-4747 • TPFISTER@HILCOGLOBAL.COMPAYMENT INFORMATION

LESIA JOSEPH 616-328-6892 • LJOSEPH@HILCOGLOBAL.COMHILCO ACCOUNTS RECEIVABLE AT HIN_AR@HILCOGLOBAL.COMCUSTOMER SERVICE

+1 877-37-HILCO • +1 616-732-1800 • INFO@HILCOIND.COMSANDI NEELY 248-254-9999 X16 • SNEELY@HILCOGLOBAL.COM

Information contained herein deemed to be accurate at time of printing and subject to change. For updated information, please visit our website at www.hilcoind.com for any changes to

date, sale process, terms and conditions and list of available assets.

ExTrudErS1 – BUSS MODEL MKS 30-18D / E 40 LABORATORY

KO-KNEADER EXTRUDER, S/N 98-1049 (1998),30mm Diameter Single Screw, 18 to 1 L/D Ratio,Barrel Electrically Heated, Water Cooled, WaterCooled Feed Throat with Hopper, 10 HP Motor withReducer, Discharge Screw Extruder, 40mm, 6 to 1L/D Ratio, Driven by an Approx. 5 kw Gear Motorwith 2 Hole Strand Die, Operators Panel, ControlPanel with Eurotherm Controllers, (2) ABB DrivePanels, K-Tron Feed System with Controllers, 1901Hours Used on the Meter

1 – WAYNE MACHINE & DIE 1" SINGLE SCREWEXTRUDER, S/N 4108, Approx. 24 to 1 L/D ratio,Electrically Heated, Air Cooled 2 Zone Non-VentedBarrel, Water Cooled Feed Throat, No Hopper,Control Panel with Temperature Controllers, andMotor, Mounted on Frame

For more information, please visit us on the web at www.hilcoind.com 3

EXTRUDERS • CALENDER • LAB MILLS • MIXING EQUIPMENT

CALEndEr1 – FARREL 3 ROLL VERTICAL

CALENDER, (3) Approx. 8” Diameterx 16” Wide Cored Rolls, Edge Guides

LAB MILLS1 - J.H. DAY CO. MODEL 14” X 30”

HORIZONTAL THREE ROLL LABMILL, S/N 73903, (3) 14” Diameter x30” Wide Cored Rolls. Adjustable EndGuides, Overhead Safety, Bottom DripPan. Manual Roll Adjustment. RollSpeed Apron 300 RPM, Middle 142RPM, Feed 56.5 RPM. Rated up toApproximately 700 Pounds an Hour.

4 – FARREL MODEL F-521-AC HORI-ZONTAL TWO ROLL MILLS, S/Ns55223, 59A233, 54188, 54240, (3) 6”Diameter x 13” Wide Cored Rolls,Adjustable End Guides, Knee Safety,Bottom Drip Pan, Manual RollAdjustment, Approx. Roll Speed Front23.5 RPM, Back 33 RPM, RollTemperature Rated up to Approx.ly350° F, Driven by a 7.5 HP Motor

MIxIng EquIPMEnT1 – LITTLEFORD MODEL FM 130D BATCH TYPE ROTARY VACUUM DRYER MIXER

(PROCESSING), S/N 42552-20639-5022 (1998), Stainless Steel, 3 Cubic Feet WorkingCapacity, 4.6 Total, Jacketed Chamber 19" Diameter x 26" Long, Internal Rated Full Vacuumat 32 to 320° F, Jacket Rated 75psi at 32 to 320° F, 2” Diameter Shaft with (2) Bolt on Plows,(2) Bolt on End Scrapers, Driven by a 10 HP 3/60/230/460 Volt, 1750 RPM Motor, Includes a15 HP, 3/60/230/460 Volt, 3515 RPM Chopper Motor with Blades, (1) Access Door with ChargePort, Center Bottom Outlet with Manual Door, Control Panel, Mounted on Carbon Steel Frame

1 – HENSCHEL MODEL HU-500 STAINLESS STEEL UNIVERSAL MIXER, S/N 821240 (1982), Approx. 500 Liter Total Capacity, 450 Liter Working, BowlApprox. 38-1/2” Diameter x 24-1/2” Deep, Swing Away Top Cover, Single Tier BladeDriven by an Approx. 20 HP Motor with Reducer, Side Entering Chopper with Blades,7.5 HP Motor, Side Bottom Outlet with Plug Valve, Control Panel

1 – BANBURY MODEL 00C MIXER, S/N 966033 (1996), Mixing Chamber Net Volume 258Cubic Inches, 4.24 Liters, 1.12 Gallons, Approx. Batch Weight 7 Pounds, 3.18 Kilograms, Typical Mixing Speed 0-250 RPM, Jacketed Sides, Cored Rotors, RamFeed with Hopper, Bottom Discharge with Pan, 40 HP DC Motor, Panel

1 – NATIONAL BULK EQUIPMENT WHIRLWIND MIXER, 72” Diameter, Single Auger,w/ Toledo Load Scales

4 – PRATER INDUSTRIES SUPER-TWIN SPIRAL MIXER BLENDERS, Made ofCarbon Steel

1 – PRATER INDUSTRIES 7' SPIRAL MIXER BLENDER, Made of Carbon Steel 1 – BLENDER, 5’ (Without Legs) 3’ Diameter, 480 Volt 1 – PNEUMATIC MIXER, on 8’ Stand

PLASTIC SUPPORT • BULK BAG FILLER • INJECTION MOLDING MACHINE

To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)4

PLASTIC SuPPOrT EquIPMEnT1 – MAC MODEL 5ML VACUUM LOADING SYSTEM, S/N M77780, Sutorbilt

Rotary Positive Displacement Blower, Approx. 0.210 Cubic Feet perRevolution, 15 HP Motor, Silencer, Filter, MAC Carbon Steel Loading Hopperwith a Slide Gate Valve, MAC Rotary Valve with Gear Motor, Control Panel

1 – WHITLOCK MODEL VTPB-15 VACUUM LOADING SYSTEM, S/N 96A0485, with Roots Rotary Positive Displacement Blower, Model 56-U-RAI, Approx. 276 Cubic Feet per Minute, Driven by a 15 HP Motor, S/N 1111943301, Silencer, Filter, Control Panel

1 – HI-VAC VACUUM LOADING SYSTEM, S/N UV1848, Sutorbilt RotaryPositive Displacement Blower, with 50 HP Motor, Filter Receiver and ControlPanel, Mounted on a Frame

1 – CONAIR MODEL CDG800 DEHUMIDIFYING GAS DRYER, S/N 81846,600 Cubic feet per minute Air Flow, 5 Desiccant Cartridges, 3/60/480 volt,Compu-Dry Control Panel

1 – YOUNG MODEL FBD-736 FILTERED BAG DUMP STATION, S/N 8540,Carbon Steel, Top Mounted Blower, Coned Bottom Outlet, Work Area withGrate

3 – WESTINGHOUSE BANBURY, WESTINGHOUSE INDUCTION MOTOR,500 HP, 3-Phase, 4160 Volt, S/N 1532P850, Westinghouse Housing, 600 HP, Ingersoll-Rand Straight-Line Horizontal Heavy Duty Vacuum Pump,Model ES-1, S/N 92413, 11-Stroke, 300 RPM

1 – CONAIR MODEL HTR THERMOLATOR WATER TEMPERATURE CONTROLLER, S/N 224624, 3/60/460 Volt, 9.4 Amps, Includes a TH-1Microprocessor Controller, Mounted on Frame with Casters

1 – UNI-DYN MODEL 630-40T OVEN DRYER, S/N 630-5294, 440 Volt, 3-Phase

1 – ITT HEAT EXCHANGER, Max Temperature 300° F, Shell Max PSI 300,Tube Max PSI 150

QUANTITY OF PLASTIC SUPPORT EQUIPMENT, Including: 56” Winder, 10’ Water Bath, Sterlco Oil Heaters, Conair Vacuum Loader System andControls, 5500-Lb Capacity Surge Bins, Vacuum Loaders & Hoppers, DrumHeaters & Tumblers, Aluminum Heater Bands, Assorted Electrical Spare Parts,Control Panels, Etc.

BuLk BAg FILLEr1 – DURANT MODEL 200E AUGER VALVE BAG PACKER/ BULK BAG

FILLER, S/N 1202, Stainless Steel Contact Surfaces, HY-AC-IV PackerScale Controller, Manual Bag Chair, Carbon Steel Frame

InJECTIOn MOLdIng MAChInE1 – ARBURG MODEL 221-55-250 ALLROUNDER INJECTION MOLDING

MACHINE, S/N 141852 (1988), 25 Ton Clamping Pressure, Platen Size13.46” x 9.84”. Distance Between Tie bars 8.70”, Maximum Daylight19.68”, Maximum Stroke of Hydraulic Ejector 19.68”, Mold OpeningStroke Adjustable to 7.87”

Partial Listing Only,

Please Visit Our Website

www.hilcoind.comFor Complete Lot Catalog

AIR HANDLING • DUST COLLECTORS • TOOL ROOM EQUIPMENT

For more information, please visit us on the web at www.hilcoind.com 5

AIr hAndLIng EquIPMEnT1 – BANANZA AIR MANAGEMENT SYSTEMS MODEL

B-2000 B SERIES AIR HANDLING UNIT, S/N98072000.52, Made of Carbon Steel, MaximumBTU/HR 2,200,000, rated CFM 12,000

1 – UNI-DYN MODEL DHD-4 DEHUMIDIFIER DRYER,S/N 2DHD46532, Dual Desiccant Beds, 110-120Process CFM, 3/60/480 Volt, 6.1 KVA

1 – EMGLO MODEL Y2B-30P 30 GALLON AIR COMPRESSOR, S/N 011989081 (1988), 180 Max PSI

1 – CRAFTSMAN SERIES 919.167620 33 GALLON AIRCOMPRESSOR, S/N 3309028205, 150 Max PSI

2 – UNI-DYN MODEL DHD-305 DEHUMIDIFIERS, 3-Phase, 460 Volt, 60 Cycles Per Minute

1 – GREAT LAKES AIR DRYER

duST COLLECTOrS1 – SLY MODEL STJ-1911-10 TUBE-JET DUST

COLLECTOR, S/N JP6-8785 (1994), Made ofCarbon Steel 3135 Square Foot Filter Area, HousingMeasures Approx. 152” x 88” x 280” Overall Height(Without Top Railing), Air Inlet, and Outlet, ConedBottom, New York Blower, Size 30 ACF, Shop#K07818-100, 50 HP Motor

1 – TORIT MODEL DFT4-16 DOWN FLOW CARTRIDGETYPE PULSE JET DUST COLLECTION SYSTEM,S/N IG512453-001, 3040 Square Foot Filter Area,Nominal Airflow Range 2030-12600 CFM, CarbonSteel Housing Measures Approx. 40” x 84” x 164”Overall Height, Air Inlet and Outlet, Coned Bottom,Top Mounted Blower, Mounted on 4 Legs

1 – PULSE JET DUST COLLECTION SYSTEM, CarbonSteel, Rotary Valve with Gear Motor, Blower with 15 HP Motor, Control Panel

1 – DOWN-FLOW DUST CABINET, 6’ W x 8’ L x 93” H,Single Access Door with Floor Grating

1 – DUST COLLECTION CABINET

TOOL rOOM EquIPMEnT1 – CLAUSING MODEL 1301 30" ENGINE LATHE, S/N 131643, 6”

3-Jaw Chuck

1 – WYSONG & MILES CO. MODEL 1010 10' X 10-GAUGE SHEAR,S/N P32-2114X

1 – KALAMAZOO MODEL 8-C-D 42" HORIZONTAL BAND SAW, S/N 3899160

1 – WELLS MODEL 58B 42" HORIZONTAL BAND SAW, S/N 4707,(Late Delivery- August 25th)

1 – DOALL MODEL DBW-1A METEL MASTER VERTICAL BANDSAW, S/N 5518824, 30” x 30” Table, 220 Volt

1 – MOAK VERTICAL BAND SAW, S/N 8752, 73” x 66” Table, 600 Volt

1 – MILLER MODEL 901564 DIALARC WELDER, S/N KF804313, 250AC/DC, 200/230/460 Volt, 1 Phase (Late Delivery- August 25th)

1 – MILLERMATIC MODEL 903556 130 XP WIRE WELDER,S/N KJ093850, 115 Volt, 1 Phase (Late Delivery- August 25th)

1 – CLAUSING MODEL 2224 DRILL PRESS, S/N 104154, 8” VerticalTravel, 1/2” Chuck, 15” x 18” Table, (Late Delivery-August 25th)

1 – JET MODEL JDP-14JF DRILL PRESS, S/N 6040230, 7” Travel,1/3” Chuck, 12” Diameter Table, 115 Volt

1 – DELTA ROCKWELL MODEL 15-655 DRILL PRESS, S/N 1409909,8” Travel, 14” x 11” Table, 1/2” Chuck

1 – ROUSSELLE NO. 25H MECHANICAL PUNCH PRESS

QUANTITY OF TOOLROOM EQUIPMENT, Including: Disc & EdgeSanders, Pedestal Grinders, Saws, H-Frame Shop Presses, Shears,Drill Presses, Mag Drills, Etc.

DISPERSERS • GRANULATORS • CONVERTING • MATERIAL HANDLING • SHOP SUPPORT

To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)6

dISPErSErS1 – DISPERSER, APPROX. 2” DIAMETER X 54” LONG

SHAFT WITH SAW TOOTH BLADE, Driven by anApprox. 25 HP Motor, Air/Oil Lift, Will Center in an Approx.48” Diameter Can,

1 – HOCKMEYER DISPERSER, Approx. 2” Diameter x 42” LongShaft with a Saw Tooth Blade, Driven by a 15 HP XP Motor,Air/Oil Lift, Will Center in an Approx. 40” Diameter Can

grAnuLATOrS1 – CUMBERLAND MODEL 1426-3KB GRANULATOR, S/N

291315-95001, Approx. 3 Bolt-on Blade Open Rotor, 14” x26” Feed & Hopper, Bottom Discharge with Screen, Panel

1 – CUMBERLAND SIZE 12 GRANULATOR, S/N 25385-698

1 – BRABENDER TECHNOLOGIES LAB GRANULATOR,3” Infeed

guILLOTInE1 – GUILLOTINE SHEAR, 32” Wide, Carbon Steel,

Hydraulically Operated, Infeed, and Discharge Table,Mounted on Frame

COnvErTIng EquIPMEnT1 – ARROW MODEL 375T-59-2 CONVERTING SLITTER,

S/N 20256, Approx. 74” Wide

1 – SHEETER, Approx. 52” Wide with Scale and Table

FOrkLIFTS1 – NISSAN 6500-LB CAPACITY LP FORKLIFT TRUCK,

S/N 06996106, 185” Reach, Three-Stage Mast, 48” Forks,Cushion Tires, 22080 Running Hours

1 – NISSAN MODEL CUGJ02F30PV 5250-LB CAPACITY LPFORKLIFT TRUCK, 187” Reach, Three-Stage Mast, 72” Forks, Side Shift, Cushion Tires, 14771 Running Hours

1 – CLARK MODEL NPR17 3500-LB CAPACITY STAND-UPELECTRIC FORKLIFT TRUCK, S/N NPR345-0786-9454FB, 198” Reach Two-Stage Mast, 42” Forks, 24” Forward Reach, 36 Volt

1 – QUANTUM MODEL 18Q600C2A 36 VOLT BATTERYCHARGER, S/N 99049169, 18 Cell, with Sackett SystemsStand, Model CS18-2-L, S/N 9900270

1 – EVI 3-WHEEL ELECTRIC CART, 1784 Running Hours

MATErIAL hAndLIng1 – ADVANCE LIFTS MODEL PEW-2548 2500-LB CAPACI-

TY ELECTRIC SCISSOR LIFT TABLE, S/N 44599/0310,60” x 96” Table

2 – BISHAMON MODEL EZ LOADER 3000-LB CAPACITY,40" DIAMETER ROTARY SCISSOR LIFT TABLES

1 – WESCO MODEL TG-50 1100-LB CAPACITY, MANUALHYDRAULIC LIFT CART, S/N 10041246-2017/T, 32” x63” Platform

1 – VESTIL MODEL HT-10-2036A 1000-LB CAPACITY,20"X36" HYDRAULIC LIFT TABLE

1 – BIG JOE MODEL 1056 1500-LB CAPACITY ELECTRICLIFT, S/N 44745

QUANTITY OF MATERIAL HANDLING EQUIPMENT,Including: Hydraulic Tilt Table, Pallet Racking, Hydraulic ToteDumpers to 2000-Lb, Hydraulic Barrel Dumpers to 500-Lb,Barrel & Platform Tippers, Hoppers, Spreader Bars, Scales,Lift Carts, Etc.

ShOP EquIPMEnT1 – DELTA MODEL T1221MS T SYSTEM THERM BOILER,

S/N 11416, 460 Volt, 3-Phase

1 – DELTA MODEL DT-3050 TRANSFORMER, S/N 18139-0391, 60-Hz, 3-Phase

1 – GE MODEL 9T25B5856G6 TRANSFORMER, Dry Type,60-Hz, 3-Phase

1 – BLUE M OVEN, 2’ x 18” x 20”

1 – SIOUX MODEL E-60 STEAM CLEANER, S/N 089511, (2)1/2 HP Motors, 100/500 PSI, 45 KW Capacity

1 – BERINGER MODEL H2-50 HYDRAULIC POWER UNIT,S/N 10853, 2400 PSI, 1740 RPM

1 – METTLER TOLEDO 30"X30" FLOOR SCALE, w/Panther Digital Readout

QUANTITY OF MISCELLANEOUS SHOP EQUIPMENT,Including: Pneumatic Tools, Routers, Vises, Tables, Motors to25 HP, Hazardous Material Storage Cabinets, AssortedElectrical, Bearings, & Spare Parts, Cabinets, Work Benches& Tables, Ladders, Etc.

HILCO Industrial is a division of Hilco Global • Headquarters 5 Revere Drive, Ste. 206 • Northbrook, IL 60062 • All rights reserved

Hilco Industrial, LLC Indiana Auctioneer & License: Tim Pfister License #AU11000094 • IN License #AC31100034 • IL License #444.000215

Printed in USA • SPA2356 • Please visit our website at www.hilcoind.com to review our complete terms and conditions.

FollowUs on:

A Hilco Global Company

Vested in Your Success

OVER 35 OFFICES THROUGHOUT NORTH, CENTRAL & SOUTH AMERICA, EUROPE, MIDDLE EAST, ASIA, AUSTRALIA

HilcoTM Industrial ONLINE AUCTIONTerms of Sale

An 18% buyer's premium will be charged on all assets.The buyer’s premium will be reduced to 16% for paymentsmade by means of cash, cashier’s check, company check(with bank letter of guarantee) or wire transfer within 48hours of sale close. Everything will be sold online to thehighest bidder for cash, in accordance with theAuctioneer’s customary “Terms of Sale”, copies of whichwill be posted online. All items will be sold “as is, where-is” without any warranties, expressed or implied. Althoughobtained from sources deemed reliable, the Auctioneermakes no warranty or guarantee to the accuracy of theinformation herein contained. Bidders are encouraged tothoroughly inspect the items on which they intend to bidprior to sale. Absolutely no items will be removed until theday after the conclusion of the sale and payment is madein full. Subject to additions, deletions and prior sale. Forupdated information, please visit our website atwww.hilcoind.com for any date, sale process, terms andconditions and list of available assets.

Payment: INVOICES WILL BE EMAILED WITHIN 24 HOURSAFTER THE AUCTION CLOSES. Payment is to be made toHilco Industrial, LLC. Payment Options: VISA or Mastercardaccepted – if invoice total is $2,000 or less; Wire Transfer;Certified Check; or Company Check (with Bank letter of guar-antee – see sample letter below). All sales are subject to salestax. Purchasers claiming exemptions from taxes must provideproof satisfactory to the Auctioneer of their entitlement toclaim such exemptions. Please see complete terms and con-ditions on our website, www.hilcoind.com.

Sample Bank Letter(Bank Name) unconditionally guarantees payment to Hilco Industrial from (Company Name). This guarantee will be valid for purchases made at theAuction of PolyOne-Warsaw on July 31-August 7, 2014.

Plastic Sheet & Extrusion Manufacturingand Support Equipment

Including Mixing, Blending, Extrusion & More

Assets no longer required in the continuing operations of PolyOne due to Plant Closure

Online Bidding Opens: Thursday, July 31st

• 11AM Local Time

Online Bidding Closes: Thursday, August 7th

Warsaw, Indiana