A Hilco Global CompanyVested in Your Success

31555 West Fourteen Mile Road, Suite 301Farmington Hills, Michigan 48334 USAPh 248-254-9999 • Fx 248-254-9995

www.hilcoind.com

Late Model High Production Lamination Press

Lines, Woodworking Equipment, &Paper Honeycomb Manufacturing Line

Surplus Machinery & Equipment to the Ongoing Operations of Bellcomb, Inc.

Online Bidding Opens: Wednesday, November 26th

Online Bidding Closes: Thursday, December 4th

Minneapolis, Minnesota

ONLINE AUCTION

To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)2

ONLINE AUCTIONHilcoTM Industrial

2004

Surplus Machinery &

Equipment to the

Ongoing Operations

of Bellcomb, Inc.

ONLINE BIDDING OPENS

WEDNESDAY, NOVEMBER 26TH

BEGINNING AT 10AM LOCAL TIME

ONLINE BIDDING CLOSES

THURSDAY, DECEMBER 4TH

CHECK WWW.HILCOIND.COM FOR CLOSING TIMES

PREVIEWMONDAY, DECEMBER 1ST THRU 3RD

9AM TO 4PM LOCAL TIME TO SCHEDULE AN EARLIER INSPECTION, PLEASE CONTACT TIM PFISTER AT 847-313-4747 OR EMAIL TPFISTER@HILCOGLOBAL.COM

ASSET LOCATIONS5001 BOONE AVENUE NORTH MINNEAPOLIS (NEW HOPE), MN 55428

9200 10TH AVE N MINNEAPOLIS (GOLDEN VALLEY), MN 55427

FURTHER INFORMATION• A 16% BUYER'S PREMIUM WILL BE CHARGED ON ALL ASSETS WITH PAYMENTS

MADE BY MEANS OF CASH, CASHIER’S CHECK, COMPANY CHECK (WITH BANKLETTER OF GUARANTEE) OR WIRE TRANSFER WITHIN 48 HOURS OF SALE CLOSE.AN 18% BUYER'S PREMIUM WILL BE CHARGED ON ALL ASSETS WITH PAYMENTSMADE BY CREDIT CARD ($2000 OR LESS), OR ANY PAYMENT MADE AFTER 48HOURS OF SALE CLOSE. AUCTION WILL BE CONDUCTED IN ENGLISH, ACCEPTINGU.S. CURRENCY ONLY.

• REMOVAL DEADLINE IS FRIDAY, DECEMBER 19TH WITH HOURS OF REMOVALBETWEEN 8AM TO 4PM MONDAY THRU FRIDAY. BUYERS WITH ITEMS LEFT ONSITE AFTER DEADLINE ARE SUBJECT TO FINES OF $500 PER DAY.

MACHINERY &  EQUIPMENT

TIM PFISTER 847-313-4747 • TPFISTER@HILCOGLOBAL.COMPAYMENT INFORMATION

LESIA JOSEPH 616-328-6892 • LJOSEPH@HILCOGLOBAL.COMHILCO ACCOUNTS RECEIVABLE AT AR-GR@HILCOGLOBAL.COMCUSTOMER SERVICE

+1 877-37-HILCO • +1 616-732-1800 • INFO@HILCOIND.COMSANDI NEELY AT 248-254-9999 X16 • SNEELY@HILCOGLOBAL.COM

Information contained herein deemed to be accurate at time of printing and subject to change. For updated information, please visit our website at www.hilcoind.com for any changes to

date, sale process, terms and conditions and list of available assets.

Late Model High Production LaminationPress Lines, Woodworking Equipment, &Paper Honeycomb Manufacturing Line

LAMINATING PRESS LINES

For more information, please visit us on the web at www.hilcoind.com 3

LAMINATING PRESS LINES • CNC ROUTER

2003

2009LaMiNaTiNg PREss LiNEs1 – BURKLE MODEL ODW 1640/20-6 MULTI-OPENING

THROUGH FEED LAMINATION PRESS LINE, S/N 12040(2009), with 8-102 mm Work Piece Thickness, 7-PlatenPressure Compensation, Rapid Open & Close, (7) 1650-4000 mm Heated Platens, 30 N/cm 2 Max. Specific Pressure,1,122 kN Total Pressure, 225 lb Max Weight per Opening,Thermal Oil Heat, 180° C Max, (6) 110/80 mm Dia Pistons,(2) Burkle Multi-Opening Power Belt Conveyor Stackers, 32-130 fpm Transport Speed, Enclosure Screens, SEWMovimot Belt Drives, (6) Openings 68.9" x 169.3", Approx 11" Daylight (S/N 0120400030), Touch Screen Control, 58" x 187" Power Roller Exit Conveyor, ESA MT 20 DPOperator Control

1 – BURKLE MODEL ODW 1640/10-5 MULTI-OPENINGTHROUGH FEED LAMINATION PRESS LINE, S/N 10734(2004), with 60-1525 mm Work Piece Width, 914-3660 mmWork Piece Length, 8-102 mm Work Piece Thickness,(6) 1650-4000 mm Heated Patens, 20 N/cm 2 Max. SpecificPressure, 561 kN Total Pressure, Thermal Oil Heat, 130° CMax, (2) Burkle Multi-Opening Power Belt ConveyorStackers, 30 m/min Transport Speed, Enclosure Screens,SEW Movimot Belt Drives, Approx 8" Daylight, Touch ScreenControl, 58" x 187" Power Roller Exit Conveyor, ESA MT 20 DP Operator Control

1 – BURKLE MODEL BULK OFFERING OF: MULTI-OPENINGTHROUGH FEED LAMINATION PRESS, with Fulton FT-0600C Natural Gas Oil Heater, (2003), Glue PumpingSystem, Accu Chiller 5-Ton Chiller, Meter Mixing System,Black 22D-875-CTR 62" Chilled Roll Coater, (2008), Black68" Chilled Roll Coater, 51" x 139" Power Roller Conveyor,53" x 84" Power Roller Conveyor, (2) 58" x 187" PowerRoller Lay Up Conveyor, (2) Burkle Touch Screen Controls,(2) Burkle 65" Multi-Opening Power Belt Stacker, (2) Albany230-C06330 Power Curtain Doors, (2) Heat SS550-1.8MM-R2-483 Secondary Loop Pumps, (2009), Burkle ODW1640/30-6 Press Line, (2009), Burkle ODW 1640/20-6,2004, (2) Multi-Opening Burkle Power Belt ConveyorStackers, (2) 58" x 187" Power Roller Exit Conveyor, SafetyScreen Enclosures

1 – BLACK MODEL APP (HTD) 5' X 10' HEATED PLATENLAMINATING PRESS, S/N 302785 (1999), with AllenBradley DTAM Micro Control, Pneumatic Pressing, SpringAssisted Return, APP (CHLD) Chilled Laminating Press S/N 302786, 5' x 10' Platen, Unloading Station with PoweredRoller Conveyor, Hydraulic Panel Flipper with (3) VacuumPod Arms, 10 HP, (2) Sterlco SMCR10 Chillers, HeatKM550-80/80-483 Oil Heater, 550° F Max, S/N J-7864,(1999), 75 PSIG, Watlow Digital Controllers

1 – JOOS 5' X 10' WATER HEATED ALUMINUM PLATENLAMINATION PRESS, with (2) 6" Daylight Openings, (2)MP-694 Digital Controllers, Safety Wire System

1 – JOOS 4' X 8' WATER HEATED ALUMINUM PLATEN LAMINATIONPRESS, S/N 1715584, with 12-18 kW, Safety Wire System

CNC ROuTER1 – NORTHWOOD MODEL NW-2105CS

TWIN TABLE CNC ROUTER, S/N 10135(2003), with Fanuc 160i-MB CNC Control,Twin Spindles, 20,000 RPM, HSK-F63Spindle Taper, (2) 12-Position AutomaticTool Changers, Kool Mist Attachmetn,Safety Wire, 13.5 kW, Pneumatic BoardSquaring Cylinders, Travaini Dyna SealModel TR0500S-1A Vacuum Pump, S/N44136-10, 2010, Variable Speed, 480,3,60

LARGE QUANTITY OF ROUTER TOOLING,Including: HSK Tool Holders, with AssortedCutters, Collets, Grooving Saw Tool Holders,Right Angle Tool Holder, Cat 30 Tool Holders

EDGEBANDERS • PANEL SAWS • PLASTIC CORE PANEL LINE

PAPER HONEYCOMB EQUIPMENT

To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)4

2005

20102010

2001

EDgEBaNDERs1 – HOMAG MODEL OPTIMAT KAL310/5/A20/S2 3 MM SINGLE

SIDED EDGEBANDER, S/N 0-200-03-8194 (2005), withExtended Width Panel Support, 80 mm Track Pads, 37-13/32"Working Height, 30 mm Panel Overhang, 12-60 mm Work PieceThickness, 59-78 fpm, Pre-Milling, Pressure Rolls, Gluing Unit,Horizontal Material Magazine, Clipping, Magazine HeightAdjustment, Top & Bottom Flush Trimming, Top & Bottom EdgeBuffing, Enclosure, Power Control NC-21, Ligmatec ZHR10/SMaterial Return Conveyor, S/N 0-305-06-0947, (2005), 460-3-60

1 – HOLZ HER MODEL ACCORD 1442 EDGEBANDER, S/N 2028(1989), with Single Coil Horizontal Uncoiler, Glue Station,Pressure Rollers, End Trim, Rough Flush, Super Trim,Buff/Polish Station

PaNEL saWs1 – GABBIANI MODEL GALAXY 115 156" FRONT LOADING

PANEL SAW, S/N 021728 (2001), with (4) Vacuum FrontSupport Tables, 8" Scoring Saw, 18" Main Saw, 5.25" Max Cut,(8) Pneumatic Material Stops, Power Squaring Attachment,WinCut Software 1.1.9 (4.2.5)P

1 – GIBEN 177" PANEL SAW

Register and Bid

Online Only at

www.hilcoind.com

PLasTiC CORE PaNEL LiNE1 – PEP (3) 4' X 10' SHEET PLASTIC CORE PRESS LINE, with Hot Oil Heat,

Chilled System, (2) Push Button Control, PLC Control, 15" Daylight, (2) 30 HPCirculation Pump, 30 HP Circulation Pump, Roof Mounted Chiller, Fulton FT-0800C 8mm BTU Boiler, S/N 36020, 150 psi, (2004), 15 HP, (2) SuperChanger UX-216-HP-122 Heat Exchangers, Approx 18" x 54" Plates, DespatchDrying Oven PSC3-575, 500° F, 84" W x 81" H x 144" D Opening, S/N 101041,Assorted Piping & Valves

PaPER HONEyCOMB EquiPMENT1 – WUXI SHENXI MODEL HXCC-2000 84" PAPER HONEYCOMB MACHINE,

S/N 2010-8 (2010), with 84" Dual Stand Powered Unwinder, (3) Glue ApplicationRolls for 3/8", 1/2" & 1" Cells, Rolling Shear, Second Glue Applicator, SheetStacker, 81" x 53" Hydraulic Sheet Press, PLC Control

1 – WUXI SHENXI MODEL HEM-1600 67" EXPANDING PAPER HONEYCOMBMACHINE, S/N 2010-8 (2010), with Knurled Roll Compression, Gluing,Expanding, Electric Drying, Curing, 10 m/min, Cross Cut In-Line Cut to LengthAttachment with Pneumatic Guillotine, PLC Control, 480-3-60

1 – SEYBOLD 95" PAPER CUTTER, S/N MC3811, with Micro Cut Control, 86" Backgauge

MASKING MACHINE • HOT MELT LAMINATING LINES • DOUBLE END TENONERS

INSPECTION EQUIPMENT • OVENS

For more information, please visit us on the web at www.hilcoind.com 5

2009

20042009

MaskiNg MaCHiNE1 – OMMA PROJ TF 1700 60" CUT OFF & MASKING MACHINE APPLICATION

SYSTEM, S/N 8808 (2009), with (4) 60" Unwind Material Stations, ESA VT60PLC Control, 1.5 kW, Southworth LS2-36 Electric Scissor Lift Table

HOT MELT LaMiNaTiNg LiNEs1 – BLACK C1175 SPR 120" HOT MELT TOP & BOTTOM LAMINATION PINCH

ROLLER, S/N 326112 (2004), with 10' Top & Bottom Roll Coater, (2) Lift-Products 4,500 Lb. Electric Scissor Lift Tables, (2) Powered 10' UnwindStands, (4) Manual Roller Stands

1 – UNION TOOL 64" HOT MELT LAMINATION PINCH ROLLER, with 64" Top& Bottom Glue Application Roll, Push Button Control, Nordson BM200 HotMelt 55 Gallon Adhesive System, S/N LU04J08225, (2004), 10' x 20'Laminating Lay Up Table, Tilting Capability, Black Bros. RPPC1175PR 10' Pinch Roller, S/N 326113, (2004), 460-3-60

1 – UNION TOOL 64" TOP & BOTTOM HOT MELT LAMINATION PINCHROLLER, with 64" Roll Applicator, Entry Roller Conveyor, Nordson BM Series55-Gallon Adhesive Supply System, Custom Lamination Table including Evans4253 Laminating Table, Top Laminate Delivery System, Union Tool 64" PinchRoller, Safety Wire System

DOuBLE END TENONERs1 – JENKINS MODEL 2104 4-SIDED DOUBLE END TENONER, S/N 903R &

904R (2009) (Refurbished), with 4' x 8' Sheet Capacity, (2) Pendant Controls,First DET with (2) Grinding Heads, (2) Deburring Sanders, 6' Incline ChipConveyor, 90° Turn Conveyor, Second DET with (2) Grinding Heads, (2)Deburring Sanders, (2) Corner Nipping Units, (4) Up Acting Drilling Heads,Incline Scrap Conveyor, Manual Height & Width Adjustments, Way Covers

1 – MEREEN-JOHNSON MODEL 620 DOUBLE END TENONER, S/N MJ2371

iNsPECTiON EquiPMENT1 – ROMER 5128 ARTICULATING ARM INSPECTION MACHINE, S/N 218 (2010)

1 – MITUTOYO MODEL CFC-60" G 60" DIGITAL CALIPER, S/N 0000572, with Case

1 – VERSA GAGE 80" DIGITAL CALIPER, with Case

1 – SPI 40" DIGITAL HEIGHT GAUGE, S/N 001451, with Case

OvEN1 – 800,000 BTU NATURAL GAS OVEN, with 400° F, Dart Accu-Set Speed Control,

Watlow Digital Temperature Control, VeriFlame 5602-33 Flame Monitoring Control, 49" Steel Mesh Belt, Expansion Roll Feed Table, Height Adjustment Roll, 49" GuillotineShear, 48" x 120" Run Out Table (For Curing Paper Honeycomb, either impregnated orunimpregnated.)

2010

PINCH ROLLERS • ROLL COATERS • SANDING EQUIPMENT • AIR HANDLING

CHILLER • CUT TO LENGTH • HEATER

To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)6

HEaTERs1 – FULTON MODEL FT-0600C 6,000,000 BTU NATURAL GAS HOT

HEATER, S/N 3408C (2003) with Nexus Integrated Burner Control,Fulton Digital Controller, 150 psi, 493.5 Sq. Ft. Heating Surface, 425° FMax Temp, 7.5 HP Blower, Yaskawa E7 Frequency Drive, ExpansionTank, 75 HP Pump, 480/3/60

2 – HEAT INC. MODEL SS550-1.8MM-R2-483 SECONDARY LOOPPUMP SYSTEMS (2009), with 550° F at 150 psig, 20 HP, WatlowDigital Control, Skid Base, S/N 09-7304-2A & 09-7304-2B

CHiLLER1 – ACCU CHILLER THERMAL CARE 5-TON CHILLER,

with 480/3/60

CuT TO LENgTH sysTEM1 – CUSTOM 68" PAPER CUT-TO-LENGTH LINE, with

(2) 68" Pinch Rollers, 48" Cutter, 48" x 156" Run OutTable, Adjustable Length Cut Off Switch, Control

PiNCH ROLLERs1 – MIDWEST AUTOMATION MODEL PR-1700 67" PINCH ROLL, S/N 2185-0303,

with Pneumatic Roll Adjustment, (2) 20" Roller Conveyors x 10' L, 460-3-60

1 – 100" PINCH ROLL, with 3" Pneumatic Top Roll Adjustment

ROLL COaTERs1 – BLACK MODEL 22D-875-CTR 62" CHILLED ROLL COATER, S/N 344312

(2008), with 57" x 84" Power Roller Infeed Conveyor, Pneumatic & Manual RollAdjustment, Auto Travel Feed, 460-3-60

1 – BLACK 68" CHILLED ROLL COATER, S/N 132699, with Infeed Table, ManualRoll Adjustment, Auto Travel Feed, 460-3-60

saNDiNg EquiPMENT1 – TIMESAVER MODEL 252-2 52" TWO-HEAD WOODWORKING SANDER,

S/N 17969T, with AutoSet Thickness Adjustment, Push Button Control, (1) 30 HPMotor, (1) 40 HP Motor

2 – CEMCO MODEL 6000 51" TOP & BOTTOM PLANER & WOODWORKINGSANDERS, with ProScale Thickness Digital Scale, (2 Each) 60 HP Motors, MaterialFeed Conveyor Belts

aiR HaNDLiNg EquiPMENT1 – SCIENTIFIC PRODUCTS 60 HP DUST COLLECTION SYSTEM, with CFM, Steel

Storage Bins, Rotary Lock, Gaylord Box Load Out, Hastings IVEC MachineInterlock System, Bin Shaker, AB PowerFlex 700, Variable Speed,

1 – GARDNER DENVER 100 HP ROTARY SCREW AIR COMPRESSOR

1 – GARDNER DENVER EAH99C 50 HP ROTARY SCREW AIR COMPRESSOR, S/N S201779 (2005), with 100 psi

1 – GARDNER DENVER MODEL EBERED 20 HP ROTARY SCREW AIR COMPRESSOR, S/N M70190 (1992), with 125 psi, 47,9XX hours

1 – GARDNER DENVER MODEL RNC250A4C2 REFRIGERATED AIR DRYER, S/N GD250A4600503015, with 250 SCFM, R-134A Refrigerant

1 – GARDNER DENVER MODEL RNC100A1C1 REFRIGERATED AIR DRYER,S/N GD100A1150501010, with 100 SCFM, R-134A Refrigerant

1 – GARDNER DENVER MODEL RNC500A4 REFRIGERATED AIR DRYER,S/N RG0j0500AB4A2NK10082, with 500 SCFM at 100 PSIG, R-134A Refrigerant

2 – SILVAN INDUSTRIES 620 GALLON VERTICAL AIR RECEIVING TANKS,S/N 566992 (2007) 620 Gallon, S/N 449393 500 Gallon, Both with 150 psi at 450° F

1 – GARDNER DENVER MODEL CTS30 ELIMINATOR II WATER & OIL SEPARATOR

1 – BUSCH MODEL MINK MM1102BV VACUUM PUMP

2008

2003

Register and Bid

Online Only at

www.hilcoind.com

MATERIAL HANDLING • ULTRASONIC WELDER • URETHANE LAMINATING LINE

WOODWORKING & PLANT SUPPORT EQUIPMENT

For more information, please visit us on the web at www.hilcoind.com 7

2007

MaTERiaL HaNDLiNg1 – COMBILIFT CL30060LA31 5,000 LB. SIDE LOADING FORKLIFT TRUCK,

S/N 6877 (2007), with 3-Stage Mast, 48" Forks, 24' Max Lift at 2,700 Lbs, LPG

1 – GORBEL 250 LB. FLOOR STANDING JIB CRANE, S/N A76302, with120" Height, Schmalz Jumbo Ergo Vacuum Lifting Attachment, S/N 2211740, 2007, 4.9 HP

1 – LIFT-RITE MODEL RG30E270648 3,000 LB. ELECTRIC PALLETJACK, S/N 4723873-10, with 12 volt Battery

1 – FACTORY CAT 34 ELECTRIC WALK BEHIND FLOOR SWEEPER

6 – LIFT PRODUCTS 4,500 LB. ELECTRIC SCISSOR LIFT TABLES, with FootPedal Control

1 – WILDECK 60' X 14' STEEL MEZZANINE, WITH ACCESS STAIRS, 125 psi Decking on Second Floor

50 – SECTIONS PALLET RACKING, with Wire Decking, Assorted AluminumSheet, Bars, Extrusions, & Parts

uLTRasONiC WELDER1 – LAMA GATEWAY MODEL 2000 ULTRASONIC WELDER,

S/N 28.0130.000.001 (2008), with Telsonic AC1900/100 Festo Welder, S/N KK12-0187-101, 2012, 72" x 80" Table

uRETHaNE LaMiNaTiNg LiNE1 – BLACK 74" URETHANE LAMINATION PINCH ROLLER, with 74"

Applicating Roll, Edge Roll Conveyor, Auto Sprayer Attachment, 4-PostFixed Height Gantry Crane System, 4,000 Lb. Capacity, 2-Ton ElectricHoist, (9) 4' x8' Pneumatic Portable Cold Presses, (3) 5' x 8' PneumaticPortable Cold Presses, with Chain Binders, Rolling Platform Carts

PLaNT suPPORT EquiPMENT1 – JT&M MODEL A3151-A PNEUMATIC DIE CUTTING PRESS, S/N 0787,

with 6" C-Frame Press, Die Set, Rolling Cart Base, 1208 Lbs. at 80 psi 1 – HNR ENGINEERING 48" X 48" FOAM CUTTING HORIZONTAL BAND

SAW, S/N 8001, with 1-1/8" Blade

1 – GLUE PUMPING SYSTEM, with Mixing/Agitation, Bulk to 55-GallonPumping Station, (2) 2 HP Pumps, Control, On (1) Section of Pallet Racking

1 – HEAT INC. SS550-650K-R2-483 550° F HOT OIL MODULATION TEMPERATURE CONTROLLER, S/N 09-7304-1A (2009), with 150 psig,5 HP Motor, Skid Base, Triac Electro-Pneumatic Positioner

1 – CUSTOM 60" NATURAL GAS FLAME TREATER, with 60" Burner Tube,New York Blower Junior Blower

2 – ALBANY MODEL 230-C06330 POWER ROLL UP CURTAIN DOORS(2009 & 2005), with Line Integration, Control

1 – METER MIXING SYSTEM, with (2) 16-Gallon Day Tanks, Skid Base,Assorted Piping, System Control

1 – BLACK 48" PANEL CLEANER, S/N 116228

2 – HUOT 6-DRAWER DRILL CABINETS, 6 & 4 Drawer, with Various Drill Bits

WOODWORkiNg suPPORT EquiPMENT1 – SCMI MODEL S520 20" PLANER, S/N AB095956 (1996), with

10" Thickness Capacity, Cutter Block 4500, Straight Cut Head, 230-3-60 1 – SAWTRAX MODEL ACCU-SQUARE 4' X 8' VERTICAL PANEL SAW,

with Porter Cable 347 Circular Saw, 7-1/4" Blade 1 – RITTER MODEL R-300 72" X 140" INCLINED FRAME CLAMPING

MACHINE, S/N 2693 (1998), with (6) Manual Clamping Fixtures

Partial Listing Only, Please Visit Our Website

www.hilcoind.comFor Complete Lot Catalog

HILCO Industrial is a division of Hilco Global • Headquarters 5 Revere Drive, Ste. 206 • Northbrook, IL 60062 • All rights reserved

Printed in USA • BEL3820 • IL License #444.000215 • Please visit our website at www.hilcoind.com to review our complete terms and conditions.

FollowUs on:

A Hilco Global Company

Vested in Your Success

OVER 35 OFFICES THROUGHOUT NORTH, CENTRAL & SOUTH AMERICA, EUROPE, MIDDLE EAST, ASIA, AUSTRALIA

HilcoTM Industrial ONLINE AUCTIONTerms of Sale

A 16% buyer's premium will be charged on all assets withpayments made by means of cash, cashier’s check, com-pany check (with bank letter of guarantee) or wire transferwithin 48 hours of sale close. An 18% buyer's premium willbe charged on all assets with payments made by creditcard ($2000 or less), or any payment made after 48 hoursof sale close. Everything will be sold online to the highestbidder for cash, in accordance with the Auctioneer’s cus-tomary “Terms of Sale”, copies of which will be postedonline. All items will be sold “as is, where-is” without anywarranties, expressed or implied. Although obtained fromsources deemed reliable, the Auctioneer makes no war-ranty or guarantee to the accuracy of the information here-in contained. Bidders are encouraged to thoroughlyinspect the items on which they intend to bid prior to sale.Absolutely no items will be removed until the day after theconclusion of the sale and payment is made in full. Subjectto additions, deletions and prior sale. For updated infor-mation, please visit our website at www.hilcoind.com forany date, sale process, terms and conditions and list ofavailable assets.

Payment: INVOICES WILL BE EMAILED WITHIN 24 HOURSAFTER THE AUCTION CLOSES. Payment is to be made toHilco Industrial, LLC. Payment Options: VISA, MastercardDiscover accepted – if invoice total is $2,000 or less; WireTransfer; Certified Check; or Company Check (with Bank let-ter of guarantee – see sample letter below). All sales are sub-ject to sales tax. Purchasers claiming exemptions from taxesmust provide proof satisfactory to the Auctioneer of their enti-tlement to claim such exemptions. Please see complete termsand conditions on our website, www.hilcoind.com.

Sample Bank Letter(Bank Name) unconditionally guarantees payment to Hilco Industrial from (Company Name). This guarantee will be valid for purchases made at theAuction of Bellcomb, Inc. on November 26 - thruDecember 4, 2014.

Late Model High Production Lamination Press

Lines, Woodworking Equipment, &Paper Honeycomb Manufacturing Line

Surplus Machinery & Equipment to the Ongoing Operations of Bellcomb, Inc.

Online Bidding Opens: Wednesday, November 26th

Online Bidding Closes: Thursday, December 4th

Minneapolis, Minnesota