open area % figure page - decor systems · 2018. 10. 23. · decorsorb d400 acoustic textile...
TRANSCRIPT
Open Area % Figure Page
Methodology 1
DecorTrend 9mm 21 1 2
DecorTrend 15mm 21 1 2
DecorTrend 9mm 17.2 2 2
DecorTrend 9mm 14 2 2
DecorTrend 9mm 21 3 3
DecorTrend 9mm 17 3 3
DecorTrend 9mm 14 3 3
DecorPly 6mm 10.2 4 3
DecorPly 12mm 10.2 4 3
DecorPly 6mm 25 5 4
DecorPly 6mm 10.2 5 4
DecorTrend 16mm 21 6 4
DecorTrend 9mm 21 6 4
DecorPly 6mm 25 7 5
DecorTrend 9mm 25 7 5
DecorTrend 9mm 14 8 5
DecorTrend 9mm 17.2 8 5
DecorTrend 9mm 21 8 5
DecorPly 6mm 10.2 9 6
DecorPly 6mm 25 9 6
DecorTrend 16mm 21 10 6
DecorTrend 9mm 21 10 6
DecorPly 6mm 10.2 11 7
DecorPly 12mm 10.2 11 7
DecorPly 6mm 10.2 12 7
DecorPly 6mm 10.2 12 7
Summary of TestsFigures 1-7 8
Open Area % Page
DecorPly 16mm 10.2 9
DecorPly 9mm 10.2 10
DecorPly 9mm 10.2 11
DecorPly 9mm 10.2 12
DecorPly 9mm 10.2 13
DecorPly 9mm 10.2 14
DecorPly 9mm 10.2 15
DecorPly 9mm 10.2 16
DecorPly 9mm 12.3 17
DecorPly 9mm 12.6 18
DecorPly 6mm 12.6 19
DecorTrend 9mm 20.2 20
DecorTrend 9mm 20.2 21
DecorTrend 9mm 20.2 22
DecorTrend 9mm 20.2 23
DecorTrend 9mm 22.6 24
DecorPly 16mm 10.2 25
DecorTile 16mm 10.2 26
DecorTile 16mm 10.2 27
DecorBoard 13mm 10.2 28
DecorLux 6mm 10.2 29
DecorLux 6mm 10.2 30
DecorLux 6mm 10.2 31
DecorLux 6mm 28.3 32
DecorLux 6mm 25.5 33
DecorLux 6mm 25.5 34
DecorSlot 6mm 10 35
DecorSlot 6mm 10 36
Appendix 37
Contents
acoustic graphs 1/5/07 3:32 PM Page 1
Manufacturer & Product Code:Decor Systems perforated and slotted panels with DecorSorb D400 Acoustic fabric backing.
Note:Acoustic fabric DecorSorb D400 was replaced with DecorSorb D440. Acoustic properties retained, appearanceapproved.
Report by: ER00211/MK
Prepared & Tested by: Mark KierzkowskiPhD EngSc CPEng MAAS
This test was carried out using the reverberation room of the Department of Applied Physics, The Royal MelbourneInstitute of Technology Limited.
The sound absorption coefficients are determined by measurement of the reverberation times, both when the room isempty and when the room contained the sample, and by use of the surface area of the sample.
Test Method
1. Testing has been carried out in accordance with AS1045-1988, “Measurement of absorption coefficients room”.
2. The room volume is 200 cubic metres.
3. Diffuse sound field is established by the inclusion of 17 stationary diffusing boards of panelboard.
4. NATA certified instrumentation used for testing.
Conclusions
DecorSorb D400 acoustic textile laminated onto perforated and slotted panels tested with two different air gaps of90mm and 400mm returns Noise Reduction Coefficients in the range from 0.65-0.80. Details for different perforationpatterns are shown in Figures 1 to 12 while numerical data is collected in Table 1.
Laboratory Sound Absorption TestingUsing the Reverberation Room
1
acoustic graphs 1/5/07 3:32 PM Page 2
Test Results• Flow resistance: The measured flow resistance of the DecorSorb D400 used in these tests was 800 Rayls.
• Sound absorption results:
1.00
0.90
0.80
0.70
0.60
0.50
0.40
0.30
0.20
0.10
0.00100 125 160 200 250 315 400 500 630 800 1000 1250 1600 2000 2500 3150 4000 5000
Sound Absorption tested to AS 1045-1988400mm air gap
Frequency Hz
FIGURE 1
Sou
nd A
bsor
ptio
n C
oeffi
cien
t
Slotted MDF board 9mm thick, open area 21% with DecorSorb D400. NRC = 0.70.
Slotted MDF board 15mm thick, open area 21% with DecorSorb D400. NRC = 0.70.
1.00
0.90
0.80
0.70
0.60
0.50
0.40
0.30
0.20
0.10
0.00100 125 160 200 250 315 400 500 630 800 1000 1250 1600 2000 2500 3150 4000 5000
Sound Absorption tested to AS 1045-1988400mm air gap
Sou
nd A
bsor
ptio
n C
oeffi
cien
t
Frequency Hz
FIGURE 2
Slotted MDF board 9mm thick, open area 17.2% with DecorSorb D400. NRC = 0.75.
Slotted MDF board 9mm thick, open area 14% with DecorSorb D400. NRC = 0.75.
2
acoustic graphs 1/5/07 3:32 PM Page 3
1.00
0.90
0.80
0.70
0.60
0.50
0.40
0.30
0.20
0.10
0.00100 125 160 200 250 315 400 500 630 800 1000 1250 1600 2000 2500 3150 4000 5000
Sound Absorption tested to AS 1045-1988400mm air gap
Sou
nd A
bsor
ptio
n C
oeffi
cien
t
Frequency Hz
FIGURE 3
Slotted MDF board 9mm thick, open area 21% with DecorSorb D400. NRC = 0.70.
Slotted MDF board 9mm thick, open area 17.2% with DecorSorb D400. NRC = 0.75.
Slotted MDF board 9mm thick, open area 14% with DecorSorb D400. NRC = 0.75.
1.00
0.90
0.80
0.70
0.60
0.50
0.40
0.30
0.20
0.10
0.00100 125 160 200 250 315 400 500 630 800 1000 1250 1600 2000 2500 3150 4000 5000
Sound Absorption tested to AS 1045-1988400mm air gap
Sou
nd A
bsor
ptio
n C
oeffi
cien
t
Frequency Hz
FIGURE 4
Perforated MDF board 6mm thick, open area 10.2% with DecorSorb D400. NRC = 0.75.
Perforated MDF board 12mm thick, open area 10.2% with DecorSorb D400. NRC = 0.70.
3
acoustic graphs 1/5/07 3:32 PM Page 4
1.00
0.90
0.80
0.70
0.60
0.50
0.40
0.30
0.20
0.10
0.00100 125 160 200 250 315 400 500 630 800 1000 1250 1600 2000 2500 3150 4000 5000
Sound Absorption tested to AS 1045-1988400mm air gap
Sou
nd A
bsor
ptio
n C
oeffi
cien
t
Frequency Hz
FIGURE 5
Perforated MDF board 6mm thick, open area 25% with DecorSorb D400. NRC = 0.75.
Perforated MDF board 6mm thick, open area 10.2% with DecorSorb D400. NRC = 0.75.
1.00
0.90
0.80
0.70
0.60
0.50
0.40
0.30
0.20
0.10
0.00100 125 160 200 250 315 400 500 630 800 1000 1250 1600 2000 2500 3150 4000 5000
Sound Absorption tested to AS 1045-198890mm air gap
Sou
nd A
bsor
ptio
n C
oeffi
cien
t
Frequency Hz
FIGURE 6
Slotted MDF board 16mm thick, open area 21% with DecorSorb D400. NRC = 0.65.
Slotted MDF board 9mm thick, open area 21% with DecorSorb D400. NRC = 0.65.
4
acoustic graphs 1/5/07 3:32 PM Page 5
1.00
0.90
0.80
0.70
0.60
0.50
0.40
0.30
0.20
0.10
0.00100 125 160 200 250 315 400 500 630 800 1000 1250 1600 2000 2500 3150 4000 5000
Sound Absorption tested to AS 1045-198890mm air gap
Sou
nd A
bsor
ptio
n C
oeffi
cien
t
Frequency Hz
FIGURE 8
Slotted MDF board 9mm thick, open area 14% with DecorSorb D400. NRC = 0.75.
Slotted MDF board 9mm thick, open area 17.2% with DecorSorb D400. NRC = 0.75.
Slotted MDF board 9mm thick, open area 21% with DecorSorb D400. NRC = 0.65.
1.00
0.90
0.80
0.70
0.60
0.50
0.40
0.30
0.20
0.10
0.00100 125 160 200 250 315 400 500 630 800 1000 1250 1600 2000 2500 3150 4000 5000
Sound Absorption tested to AS 1045-198890mm air gap
Sou
nd A
bsor
ptio
n C
oeffi
cien
t
Frequency Hz
FIGURE 7
Perforated MDF board 6mm thick, open area 25% with DecorSorb D400. NRC = 0.70.
Slotted MDF board 9mm thick, open area 21% with DecorSorb D400. NRC = 0.65.
5
acoustic graphs 1/5/07 3:32 PM Page 6
1.00
0.90
0.80
0.70
0.60
0.50
0.40
0.30
0.20
0.10
0.00100 125 160 200 250 315 400 500 630 800 1000 1250 1600 2000 2500 3150 4000 5000
Sound Absorption tested to AS 1045-198890mm air gap
Sou
nd A
bsor
ptio
n C
oeffi
cien
t
Frequency Hz
FIGURE 10
Slotted MDF board 16mm thick, open area 21% with DecorSorb D400. NRC = 0.65.
Slotted MDF board 9mm thick, open area 21% with DecorSorb D400. NRC = 0.65.
1.00
0.90
0.80
0.70
0.60
0.50
0.40
0.30
0.20
0.10
0.00100 125 160 200 250 315 400 500 630 800 1000 1250 1600 2000 2500 3150 4000 5000
Sound Absorption tested to AS 1045-198890mm air gap
Sou
nd A
bsor
ptio
n C
oeffi
cien
t
Frequency Hz
FIGURE 9
Perforated MDF board 6mm thick, open area 10.2% with DecorSorb D400. NRC = 0.80.
Perforated MDF board 6mm thick, open area 25% with DecorSorb D400. NRC = 0.70.
6
acoustic graphs 1/5/07 3:32 PM Page 7
Sou
nd A
bsor
ptio
n C
oeffi
cien
t
FIGURE 12
1.00
0.80
0.60
0.40
0.20
100 125 160 200 250 315 400 500 630 800 1000 1250 1600 2000 2500 3150 4000 5000
Sound Absorption tested to AS 1045-198890mm air gap
Perforated MDF board 6mm thick, open area 10.2% with DecorSorb D400. NRC = 0.80.
Perforated MDF board 6mm thick, open area 10.2% with 30kg poly, 80mm thick. NRC = 0.80.
1.00
0.90
0.80
0.70
0.60
0.50
0.40
0.30
0.20
0.10
0.00100 125 160 200 250 315 400 500 630 800 1000 1250 1600 2000 2500 3150 4000 5000
Sound Absorption tested to AS 1045-198890mm air gap
Sou
nd A
bsor
ptio
n C
oeffi
cien
t
Frequency Hz
FIGURE 11
Perforated MDF board 6mm thick, open area 10.2% with DecorSorb D400. NRC = 0.80.
Perforated MDF board 12mm thick, open area 10.2% with DecorSorb D400. NRC = 0.75.
7
acoustic graphs 1/5/07 3:32 PM Page 8
Tabl
e 1
– Nu
mer
ical
dat
a fo
r te
st r
esul
ts
90m
m g
ap
Perf
orat
edM
DF b
oard
6mm
thi
ck,
open
are
a10
.2%
wit
hDe
cors
orb
NRC
= 0.
80
Perf
orat
edM
DF b
oard
6mm
thi
ck,
open
are
a25
% w
ith
Deco
rsor
b
NRC
= 0.
70
Perf
orat
edM
DF b
oard
12m
m t
hick
,op
en a
rea
10.2
% w
ith
Deco
rsor
b
NRC
= 0.
75
Slot
ted
MDF
boa
rd9m
m t
hick
,op
en a
rea
14%
wit
hDe
cors
orb
NRC
= 0.
75
Slot
ted
MDF
boa
rd9m
m t
hick
,op
en a
rea
17.2
% w
ith
Deco
rsor
b
NRC
= 0.
75
Slot
ted
MDF
boa
rd16
mm
thi
ck,
open
are
a21
% w
ith
Deco
rsor
b
NRC
= 0.
65
Slot
ted
MDF
boa
rd9m
m t
hick
,op
en a
rea
21%
wit
hDe
cors
orb
NRC
= 0.
65
Slot
ted
MDF
boa
rd9m
m t
hick
,op
en a
rea
21%
wit
hDe
cors
orb
NRC
= 0.
70
Slot
ted
MDF
boa
rd16
mm
thi
ck,
open
are
a21
% w
ith
Deco
rsor
b
NRC
= 0.
70
Slot
ted
MDF
boa
rd9m
m t
hick
,op
en a
rea
17.2
% w
ith
Deco
rsor
b
NRC
= 0.
75
Slot
ted
MDF
boa
rd9m
m t
hick
,op
en a
rea
14%
wit
hDe
cors
orb
NRC
= 0.
75
Perf
orat
edM
DF b
oard
6mm
thi
ck,
open
are
a25
% w
ith
Deco
rsor
b
NRC
= 0.
75
Perf
orat
edM
DF b
oard
12m
m t
hick
,op
en a
rea
10.2
% w
ith
Deco
rsor
b
NRC
= 0.
70
Perf
orat
edM
DF b
oard
6mm
thi
ck,
open
are
a10
.2%
wit
h30
kg p
oly,
80m
m t
hick
NRC
= 0.
80
Freq
uenc
yH
z
100
125
160
200
250
315
400
500
630
800
1000
1250
1800
2000
2500
3150
4000
5000
NRC
0.32
0.34
0.34
0.41
0.62
0.71
0.88
0.98
1.03
1.04
0.87
0.85
0.73
0.60
0.62
0.58
0.40
0.48
0.80
0.17
0.23
0.23
0.28
0.43
0.54
0.69
0.79
0.96
1.01
1.00
0.93
0.79
0.61
0.63
0.64
0.58
0.61
0.70
0.34
0.36
0.39
0.44
0.71
0.77
0.93
0.97
0.99
0.97
0.88
0.76
0.62
0.63
0.55
0.53
0.51
0.55
0.75
0.22
0.30
0.29
0.33
0.54
0.66
0.81
0.94
1.01
0.99
0.93
0.82
0.65
0.64
0.58
0.53
0.49
0.51
0.75
0.22
0.28
0.26
0.31
0.51
0.62
0.79
0.93
1.04
1.02
0.98
0.89
0.71
0.58
0.63
0.61
0.58
0.56
0.75
0.18
0.24
0.23
0.29
0.44
0.56
0.75
0.87
0.97
0.96
0.83
0.85
0.55
0.47
0.55
0.54
0.65
0.58
0.65
0.21
0.25
0.23
0.25
0.41
0.53
0.67
0.86
0.96
0.98
0.91
0.78
0.59
0.48
0.55
0.53
0.48
0.46
0.65
0.31
0.40
0.50
0.59
0.80
0.85
1.06
1.09
0.98
0.86
0.72
0.60
0.52
0.57
0.55
0.42
0.38
0.30
0.80
0.31
0.30
0.69
0.90
0.88
0.89
0.70
0.80
0.74
0.73
0.67
0.65
0.67
0.64
0.63
0.60
0.57
0.55
0.70
0.84
0.77
0.71
0.86
0.85
0.86
0.69
0.59
0.72
0.71
0.65
0.62
0.66
0.63
0.62
0.62
0.62
0.62
0.70
0.87
0.74
0.74
0.92
0.91
0.95
0.75
0.65
0.79
0.79
0.76
0.78
0.78
0.73
0.71
0.67
0.62
0.64
0.75
0.80
0.90
0.71
0.88
0.96
0.86
0.73
0.84
0.76
0.77
0.74
0.75
0.73
0.67
0.63
0.60
0.57
0.59
0.75
0.84
0.80
0.70
0.84
0.92
0.82
0.73
0.60
0.74
0.77
0.72
0.78
0.82
0.76
0.76
0.72
0.68
0.68
0.75
0.82
0.90
0.72
0.80
0.88
0.86
0.73
0.67
0.77
0.71
0.70
0.70
0.87
0.64
0.58
0.59
0.59
0.61
0.70
400m
m g
ap
8
acoustic graphs 1/5/07 3:32 PM Page 9
Frequency(Hertz)
100125160200250315400500630800
10001250160020002500315040005000
0.400.500.400.400.600.600.650.650.700.650.650.650.600.600.600.650.700.70
SoundAbsorptionCoefficient
(Alpha)
Test Method: AS 1045-1988, MEASUREMENT OF SOUND ABSORPTION IN A REVERBERATION ROOM.
RMIT Test No.: 121I/04-069/PDReport No.: A03RMST1Test No.: A03D44RMP1Date of test: 2/06/2004Product: DecorPly (MDF)
Sample tested in the following configuration:
Surface panel: DecorPly (MDF)Material: MDF with DecorSorb backingPanel thickness: 16mmPanel type: AP125S/45Open area: 10.2%Insulation: NoneAir gap under panel: 90mmSample size: 8.64 square metres
The perimeter of the sample was enclosed with an MDF frame.
Table 9
NRC = 0.60
Graph 9
decorPly (MDF)
9
acoustic graphs 1/5/07 3:32 PM Page 10
Frequency(Hertz)
100125160200250315400500630800
10001250160020002500315040005000
0.650.750.600.500.600.600.600.550.600.600.600.600.650.650.600.650.650.70
SoundAbsorptionCoefficient
(Alpha)
Test Method: AS 1045-1988, MEASUREMENT OF SOUND ABSORPTION IN A REVERBERATION ROOM.
RMIT Test No.: 121I/04-069/PDReport No.: A03RMST1Test No.: A03D44RMP2Date of test: 1/06/2004Product: DecorPly (MDF)
Sample tested in the following configuration:
Surface panel: DecorPly (MDF)Material: MDF with DecorSorb backingPanel thickness: 9mmPanel type: AP125S/45Open area: 10.2%Insulation: NoneAir gap under panel: 400mmSample size: 8.64 square metres
The perimeter of the sample was enclosed with an MDF frame.
Table 10
NRC = 0.60
Graph 10
decorPly (MDF)
10
acoustic graphs 1/5/07 3:32 PM Page 11
Frequency(Hertz)
100125160200250315400500630800
10001250160020002500315040005000
0.650.700.550.550.550.600.600.650.650.650.650.650.650.650.600.600.650.65
SoundAbsorptionCoefficient
(Alpha)
Test Method: AS 1045-1988, MEASUREMENT OF SOUND ABSORPTION IN A REVERBERATION ROOM.
RMIT Test No.: 121I/04-069/PDReport No.: A03RMST1Test No.: A03D44RMP3Date of test: 2/06/2004Product: DecorPly (MDF)
Sample tested in the following configuration:
Surface panel: DecorPly (MDF)Material: MDF with DecorSorb backingPanel thickness: 9mmPanel type: AP125/S45Open area: 10.2%Insulation: A8225, 65mm dual density insulation, of mounted directly under panel faceAir gap under panel: 400mmSample size: 8.64 square metres
The perimeter of the sample was enclosed with an MDF frame.
Table 11
NRC = 0.60
Graph 11
decorPly (MDF)
11
acoustic graphs 1/5/07 3:32 PM Page 12
Frequency(Hertz)
100125160200250315400500630800
10001250160020002500315040005000
0.350.500.400.400.550.600.650.650.650.650.650.650.600.550.550.550.550.60
SoundAbsorptionCoefficient
(Alpha)
Test Method: AS 1045-1988, MEASUREMENT OF SOUND ABSORPTION IN A REVERBERATION ROOM.
RMIT Test No.: 121I/04-069/PDReport No.: A03RMST1Test No.: A03D44RMP4Date of test: 2/06/2004Product: DecorPly (MDF)
Sample tested in the following configuration:
Surface panel: DecorPly (MDF)Material: MDF with DecorSorb backingPanel thickness: 9mmPanel type: AP125/S45Open area: 10.2%Insulation: NoneAir gap under panel: 90mmSample size: 8.64 square metres
The perimeter of the sample was enclosed with an MDF frame.
Table 12
NRC = 0.60
Graph 12
decorPly (MDF)
12
acoustic graphs 1/5/07 3:32 PM Page 13
Frequency(Hertz)
100125160200250315400500630800
10001250160020002500315040005000
0.550.650.700.600.650.700.700.700.700.650.650.650.600.550.600.600.600.65
SoundAbsorptionCoefficient
(Alpha)
Test Method: AS 1045-1988, MEASUREMENT OF SOUND ABSORPTION IN A REVERBERATION ROOM.
RMIT Test No.: 121I/04-069/PDReport No.: A03RMST1Test No.: A03D44RMP5Date of test: 3/06/2004Product: DecorPly (MDF)
Sample tested in the following configuration:
Surface panel: DecorPly (MDF)Material: MDF with DecorSorb backingPanel thickness: 9mmPanel type: AP125S/45Open area: 10.2%Insulation: A8225, 65mm dual density insulation, mounted on floor of chamber
away from the face panel.Air gap under panel: 90mmSample size: 8.64 square metres
The perimeter of the sample was enclosed with an MDF frame.
Table 13
NRC = 0.65
Graph 13
decorPly (MDF)
13
acoustic graphs 1/5/07 3:32 PM Page 14
Frequency(Hertz)
100125160200250315400500630800
10001250160020002500315040005000
0.450.550.550.500.600.650.700.650.700.700.650.650.600.550.600.550.600.60
SoundAbsorptionCoefficient
(Alpha)
Test Method: AS 1045-1988, MEASUREMENT OF SOUND ABSORPTION IN A REVERBERATION ROOM.
RMIT Test No.: 121I/04-069/PDReport No.: A03RMST1Test No.: A03D44RMP6Date of test: 3/06/2004Product: DecorPly (MDF)
Sample tested in the following configuration:
Surface panel: DecorPly (MDF)Material: MDF with DecorSorb backingPanel thickness: 9mmPanel type: AP125S/45Open area: 10.2%Insulation: ATK3 Insulation mounted on the floor away from panel faceAir gap under panel: 90mmSample size: 8.64 square metres
The perimeter of the sample was enclosed with an MDF frame.
Table 14
NRC = 0.60
Graph 14
decorPly (MDF)
14
acoustic graphs 1/5/07 3:32 PM Page 15
Frequency(Hertz)
100125160200250315400500630800
10001250160020002500315040005000
0.250.400.400.350.500.600.650.650.650.700.700.700.700.650.600.550.550.60
SoundAbsorptionCoefficient
(Alpha)
Test Method: AS 1045-1988, MEASUREMENT OF SOUND ABSORPTION IN A REVERBERATION ROOM.
RMIT Test No.: 121I/04-069/PDReport No.: A03RMST1Test No.: A03D44RMP7Date of test: 1/06/2004Product: DecorPly (MDF)
Sample tested in the following configuration:
Surface panel: DecorPly (MDF)Material: MDF with DecorSorb backingPanel thickness: 9mmPanel type: AP125S/45Open area: 10.2%Insulation: A8210, 25mm insulation, mounted on floor of chamber away from the face panelAir gap under panel: 50mmSample size: 8.64 square metres
The perimeter of the sample was enclosed with an MDF frame.
Table 15
NRC = 0.60
Graph 15
decorPly (MDF)
15
acoustic graphs 1/5/07 3:32 PM Page 16
Frequency(Hertz)
100125160200250315400500630800
10001250160020002500315040005000
0.150.300.250.250.400.450.550.550.600.600.650.650.650.650.600.550.500.60
SoundAbsorptionCoefficient
(Alpha)
Test Method: AS 1045-1988, MEASUREMENT OF SOUND ABSORPTION IN A REVERBERATION ROOM.
RMIT Test No.: 121I/04-069/PDReport No.: A03RMST1Test No.: A03D44RMP7ADate of test: 1/06/2004Product: DecorPly
Sample tested in the following configuration:
Surface panel: DecorPlyMaterial: MDF with DecorSorb backingPanel thickness: 9mmPanel type: AP125S/45Open area: 10.2%Insulation: NoneAir gap under panel: 50mmSample size: 8.64 square metres
The perimeter of the sample was enclosed with an MDF frame.
Table 16
NRC = 0.55
Graph 16
decorPly
16
acoustic graphs 1/5/07 3:32 PM Page 17
Frequency(Hertz)
100125160200250315400500630800
10001250160020002500315040005000
0.350.500.450.400.550.600.650.650.700.650.650.650.600.550.550.550.600.60
SoundAbsorptionCoefficient
(Alpha)
Test Method: AS 1045-1988, MEASUREMENT OF SOUND ABSORPTION IN A REVERBERATION ROOM.
RMIT Test No.: 121I/04-069/PDReport No.: A03RMST1Test No.: A03D44RMP8Date of test: 2/06/2004Product: DecorPly
Sample tested in the following configuration:
Surface panel: DecorPlyMaterial: MDF with DecorSorb backingPanel thickness: 9mmPanel type: AP250D/70Open area: 12.3%Insulation: NoneAir gap under panel: 90mmSample size: 8.64 square metres
The perimeter of the sample was enclosed with an MDF frame.
Table 17
NRC = 0.60
Graph 17
decorPly
17
acoustic graphs 1/5/07 3:32 PM Page 18
Frequency(Hertz)
100125160200250315400500630800
10001250160020002500315040005000
0.350.500.450.450.550.550.650.650.650.650.650.650.600.550.550.550.500.50
SoundAbsorptionCoefficient
(Alpha)
Test Method: AS 1045-1988, MEASUREMENT OF SOUND ABSORPTION IN A REVERBERATION ROOM.
RMIT Test No.: 121I/04-069/PDReport No.: A03RMST1Test No.: A03D44RMP9Date of test: 3/06/2004Product: DecorPly
Sample tested in the following configuration:
Surface panel: DecorPlyMaterial: MDF with DecorSorb backingPanel thickness: 9mmPanel type: AS250S/100Open area: 12.6%Insulation: NoneAir gap under panel: 90mmSample size: 8.64 square metres
The perimeter of the sample was enclosed with an MDF frame.
Table 18
NRC = 0.60
Graph 18
decorPly
18
acoustic graphs 1/5/07 3:32 PM Page 19
Frequency(Hertz)
100125160200250315400500630800
10001250160020002500315040005000
0.350.500.450.450.550.600.600.600.650.650.650.650.600.550.550.550.500.45
SoundAbsorptionCoefficient
(Alpha)
Test Method: AS 1045-1988, MEASUREMENT OF SOUND ABSORPTION IN A REVERBERATION ROOM.
RMIT Test No.: 121I/04-069/PDReport No.: A03RMST1Test No.: A03D44RMP11Date of test: 3/06/2004Product: DecorPly
Sample tested in the following configuration:
Surface panel: DecorPlyMaterial: MDF with DecorSorb backingPanel thickness: 6mmPanel type: AP250/S100Open area: 12.6%Insulation: NoneAir gap under panel: 90mmSample size: 8.64 square metres
The perimeter of the sample was enclosed with an MDF frame.
Table 20
NRC = 0.60
Graph 20
decorPly
19
acoustic graphs 1/5/07 3:32 PM Page 20
Frequency(Hertz)
100125160200250315400500630800
10001250160020002500315040005000
0.800.850.650.700.750.750.750.750.800.800.850.800.800.800.750.750.750.75
SoundAbsorptionCoefficient
(Alpha)
Test Method: AS 1045-1988, MEASUREMENT OF SOUND ABSORPTION IN A REVERBERATION ROOM.
RMIT Test No.: 121I/04-069/PDReport No.: A03RMST1Test No.: A03D44RMS2Date of test: 2/06/2004Product: DecorTrend
Sample tested in the following configuration:
Surface panel: DecorTrendMaterial: MDF with DecorSorb backingPanel thickness: 9mmPanel type: AS26-20/47Open area: 20.2%Insulation: A8225, 65mm dual density insulation, of mounted directly under panel faceAir gap under panel: 400mmSample size: 8.64 square metres
The perimeter of the sample was enclosed with an MDF frame.
Table 21
NRC = 0.80
Graph 21
decorTrend
20
acoustic graphs 1/5/07 3:32 PM Page 21
Frequency(Hertz)
100125160200250315400500630800
10001250160020002500315040005000
0.500.600.800.650.800.900.900.900.900.900.850.750.750.700.700.700.700.75
SoundAbsorptionCoefficient
(Alpha)
Test Method: AS 1045-1988, MEASUREMENT OF SOUND ABSORPTION IN A REVERBERATION ROOM.
RMIT Test No.: 121I/04-069/PDReport No.: A03RMST1Test No.: A03D44RMS4Date of test: 3/06/2004Product: DecorTrend
Sample tested in the following configuration:
Surface panel: DecorTrendMaterial: MDF with DecorSorb backingPanel thickness: 9mmPanel type: AS26-20/47Open area: 20.2%Insulation: A8225, 65mm dual density insulation, mounted on floor of chamber
away from the face panelAir gap under panel: 90mmSample size: 8.64 square metres
The perimeter of the sample was enclosed with an MDF frame.
Table 22
NRC = 0.80
Graph 22
decorTrend
21
acoustic graphs 1/5/07 3:32 PM Page 22
Frequency(Hertz)
100125160200250315400500630800
10001250160020002500315040005000
0.450.600.550.550.700.800.850.850.900.850.850.800.750.650.700.700.700.70
SoundAbsorptionCoefficient
(Alpha)
Test Method: AS 1045-1988, MEASUREMENT OF SOUND ABSORPTION IN A REVERBERATION ROOM.
RMIT Test No.: 121I/04-069/PDReport No.: A03RMST1Test No.: A03D44RMS5Date of test: 3/06/2004Product: DecorTrend
Sample tested in the following configuration:
Surface panel: DecorTrendMaterial: MDF with DecorSorb backingPanel thickness: 9mmPanel type: AS26-20/47Open area: 20.2%Insulation: ATK3 Insulation mounted on the floor away from panel faceAir gap under panel: 90mmSample size: 8.64 square metres
The perimeter of the sample was enclosed with an MDF frame.
Table 23
NRC = 0.75
Graph 23
decorTrend
22
acoustic graphs 1/5/07 3:32 PM Page 23
Frequency(Hertz)
100125160200250315400500630800
10001250160020002500315040005000
0.200.300.350.350.500.650.700.800.850.850.900.850.850.800.750.650.650.75
SoundAbsorptionCoefficient
(Alpha)
Test Method: AS 1045-1988, MEASUREMENT OF SOUND ABSORPTION IN A REVERBERATION ROOM.
RMIT Test No.: 121I/04-069/PDReport No.: A03RMST1Test No.: A03044RMS6Date of test: 1/06/2004Product: DecorTrend
Sample tested in the following configuration:
Surface panel: DecorTrendMaterial: MDF with DecorSorb backingPanel thickness: 9mmPanel type: AS26-20/47Open area: 20.2%Insulation: A8210, 25mm insulation, mounted on floor of chamber away from the face panelAir gap under panel: 50mmSample size: 8.64 square metres
The perimeter of the sample was enclosed with an MDF frame.
Table 24
NRC = 0.75
Graph 24
decorTrend
23
acoustic graphs 1/5/07 3:32 PM Page 24
Frequency(Hertz)
100125160200250315400500630800
10001250160020002500315040005000
0.250.400.400.400.550.650.750.750.850.850.850.800.750.650.650.650.600.60
SoundAbsorptionCoefficient
(Alpha)
Test Method: AS 1045-1988, MEASUREMENT OF SOUND ABSORPTION IN A REVERBERATION ROOM.
RMIT Test No.: 121I/04-069/PDReport No.: A03RMST1Test No.: A03D44RMS7Date of test: 3/06/2004Product: DecorTrend
Sample tested in the following configuration:
Surface panel: DecorTrendMaterial: MDF with DecorSorb backingPanel thickness: 9mmPanel type: AS11-25/80Open area: 22.6%Insulation: NoneAir gap under panel: 90mmSample size: 8.64 square metres
The perimeter of the sample was enclosed with an MDF frame.
Table 25
NRC = 0.70
Graph 25
decorTrend
24
acoustic graphs 1/5/07 3:32 PM Page 25
Frequency(Hertz)
100125160200250315400500630800
10001250160020002500315040005000
0.600.700.500.550.550.600.600.600.650.600.600.650.650.650.650.700.750.85
SoundAbsorptionCoefficient
(Alpha)
Test Method: AS 1045-1988, MEASUREMENT OF SOUND ABSORPTION IN A REVERBERATION ROOM.
RMIT Test No.: 121I/04-069/PDReport No.: A03RMST1Test No.: A03D44RMT1Date of test: 1/06/2004Product: DecorPly
Sample tested in the following configuration:
Surface panel: DecorPlyMaterial: MDF with DecorSorb backingPanel thickness: 16mmPanel type: AP125S/45Open area: 10.2%Insulation: NoneAir gap under panel: 400mmSample size: 8.64 square metres
The perimeter of the sample was enclosed with an MDF frame.
Table 28
NRC = 0.60
Graph 28
decorPly
25
acoustic graphs 1/5/07 3:32 PM Page 26
Frequency(Hertz)
100125160200250315400500630800
10001250160020002500315040005000
0.550.700.550.500.550.550.550.550.600.600.550.550.550.500.550.550.550.60
SoundAbsorptionCoefficient
(Alpha)
Test Method: AS 1045-1988, MEASUREMENT OF SOUND ABSORPTION IN A REVERBERATION ROOM.
RMIT Test No.: 121I/04-069/PDReport No.: A03RMST1Test No.: A03D44RMT2Date of test: 1/06/2004Product: DecorTile
Sample tested in the following configuration:
Surface panel: DecorTileMaterial: MDF with DecorSorb backingPanel thickness: 16mmPanel type: AP1255/45Open area: 10.2%Insulation: NoneAir gap under panel: 400mmSample size: 8.64 square metres
The perimeter of the sample was enclosed with an MDF frame.
Table 29
NRC = 0.55
Graph 29
decorTile
26
acoustic graphs 1/5/07 3:32 PM Page 27
Frequency(Hertz)
100125160200250315400500630800
10001250160020002500315040005000
0.700.750.550.550.600.600.600.600.650.600.600.600.600.550.550.550.550.60
SoundAbsorptionCoefficient
(Alpha)
Test Method: AS 1045-1988, MEASUREMENT OF SOUND ABSORPTION IN A REVERBERATION ROOM.
RMIT Test No.: 121I/04-069/PDReport No.: A03RMST1Test No.: A03D44RMT3Date of test: 2/06/2004Product: DecorTile
Sample tested in the following configuration:
Surface panel: DecorTileMaterial: MDF with DecorSorb backingPanel thickness: 16mmPanel type: AP1255/45Open area: 10.2%Insulation: A8225, 65mm dual density insulation, of mounted directly under panel faceAir gap under panel: 400mmSample size: 8.64 square metres
The perimeter of the sample was enclosed with an MDF frame.
Table 30
NRC = 0.60
Graph 30
decorTile
27
acoustic graphs 1/5/07 3:32 PM Page 28
Frequency(Hertz)
100125160200250315400500630800
10001250160020002500315040005000
0.300.500.400.400.550.600.650.650.650.650.650.700.650.550.600.600.650.70
SoundAbsorptionCoefficient
(Alpha)
Test Method: AS 1045-1988, MEASUREMENT OF SOUND ABSORPTION IN A REVERBERATION ROOM.
RMIT Test No.: 121I/04-069/PDReport No.: A03RMST1Test No.: A03D44RMB1Date of test: 3/06/2004Product: DecorBoard
Sample tested in the following configuration:
Surface panel: DecorBoardMaterial: Plaster board with DecorSorb backingPanel thickness: 13mmPanel type: AP125S/45Open area: 10.2%Insulation: NoneAir gap under panel: 90mmSample size: 8.64 square metres
The perimeter of the sample was enclosed with an MDF frame.
Table 1
NRC = 0.60
Graph 1
decorBoard
28
acoustic graphs 1/5/07 3:32 PM Page 29
Frequency(Hertz)
100125160200250315400500630800
10001250160020002500315040005000
0.600.750.600.600.650.700.700.650.650.700.650.700.700.650.650.650.700.70
SoundAbsorptionCoefficient
(Alpha)
Test Method: AS 1045-1988, MEASUREMENT OF SOUND ABSORPTION IN A REVERBERATION ROOM.
RMIT Test No.: 121I/04-069/PDReport No.: A03RMST1Test No.: A03D44RML1Date of test: 1/06/2004Product: DecorLux
Sample tested in the following configuration:
Surface panel: DecorLuxMaterial: Fibre-Cement with DecorSorb backingPanel thickness: 6mmPanel type: AP125S/45Open area: 10.2%Insulation: NoneAir gap under panel: 400mmSample size: 8.64 square metres
The perimeter of the sample was enclosed with an MDF frame.
Table 3
NRC = 0.65
Graph 3
decorLux
29
acoustic graphs 1/5/07 3:32 PM Page 30
Frequency(Hertz)
100125160200250315400500630800
10001250160020002500315040005000
0.250.400.400.400.550.600.700.700.700.750.750.750.750.650.600.650.600.60
SoundAbsorptionCoefficient
(Alpha)
Test Method: AS 1045-1988, MEASUREMENT OF SOUND ABSORPTION IN A REVERBERATION ROOM.
RMIT Test No.: 121I/04-069/PDReport No.: A03RMST1Test No.: A03D44RML2Date of test: 2/06/2004Product: DecorLux
Sample tested in the following configuration:
Surface panel: DecorLuxMaterial: Fibre-Cement with DecorSorb backingPanel thickness: 6mmPanel type: AL125S/45Open area: 10.2%Insulation: NoneAir gap under panel: 90mmSample size: 8.64 square metres
The perimeter of the sample was enclosed with an MDF frame.
Table 4
NRC = 0.65
Graph 4
decorLux
30
acoustic graphs 1/5/07 3:32 PM Page 31
Frequency(Hertz)
100125160200250315400500630800
10001250160020002500315040005000
0.150.250.300.350.450.600.650.700.750.800.850.800.800.750.700.650.600.65
SoundAbsorptionCoefficient
(Alpha)
Test Method: AS 1045-1988, MEASUREMENT OF SOUND ABSORPTION IN A REVERBERATION ROOM.
RMIT Test No.: 121I/04-069/PDReport No.: A03RMST1Test No.: A03D44RML3Date of test: 1/06/2004Product: DecorLux
Sample tested in the following configuration:
Surface panel: DecorLuxMaterial: Fibre-Cement with DecorSorb backingPanel thickness: 6mmPanel type: AL125S/45Open area: 10.2%Insulation: A8210, 25mm insulation, mounted on floor of chamber away from the face panel.Air gap under panel: 50mmSample size: 8.64 square metres
The perimeter of the sample was enclosed with an MDF frame.
Table 5
NRC = 0.70
Graph 5
decorLux
31
acoustic graphs 1/5/07 3:32 PM Page 32
Frequency(Hertz)
100125160200250315400500630800
10001250160020002500315040005000
0.200.350.350.350.500.600.750.750.850.850.850.800.750.550.600.600.500.45
SoundAbsorptionCoefficient
(Alpha)
Test Method: AS 1045-1988, MEASUREMENT OF SOUND ABSORPTION IN A REVERBERATION ROOM.
RMIT Test No.: 121I/04-069/PDReport No.: A03RMST1Test No.: A03D44RML4Date of test: 2/06/2004Product: DecorLux
Sample tested in the following configuration:
Surface panel: DecorLuxMaterial: Fibre-Cement with DecorSorb backingPanel thickness: 6mmPanel type: AL500S/300Open area: 28.3%Insulation: NoneAir gap under panel: 90mmSample size: 8.64 square metres
The perimeter of the sample was enclosed with an MDF frame.
Table 6
NRC = 0.65
Graph 6
decorLux
32
acoustic graphs 1/5/07 3:32 PM Page 33
Frequency(Hertz)
100125160200250315400500630800
10001250160020002500315040005000
0.600.800.700.650.750.750.800.650.700.650.650.650.700.700.650.600.600.55
SoundAbsorptionCoefficient
(Alpha)
Test Method: AS 1045-1988, MEASUREMENT OF SOUND ABSORPTION IN A REVERBERATION ROOM.
RMIT Test No.: 121I/04-069/PDReport No.: A03RMST1Test No.: A03D44RML5Date of test: 1/06/2004Product: DecorLux Max
Sample tested in the following configuration:
Surface panel: DecorLux MaxMaterial: Fibre-Cement with I.A.B. backingPanel thickness: 6mmPanel type: AL500S/300Open area: 25.5%Insulation: NoneAir gap under panel: 400mmSample size: 8.64 square metres
The perimeter of the sample was enclosed with an MDF frame.
Table 7
NRC = 0.70
Graph 7
decorLux Max
33
acoustic graphs 1/5/07 3:32 PM Page 34
Frequency(Hertz)
100125160200250315400500630800
10001250160020002500315040005000
0.250.350.350.300.400.500.750.800.850.800.750.650.550.400.400.400.350.35
SoundAbsorptionCoefficient
(Alpha)
Test Method: AS 1045-1988, MEASUREMENT OF SOUND ABSORPTION IN A REVERBERATION ROOM.
RMIT Test No.: 121I/04-069/PDReport No.: A03RMST1Test No.: A03D44RML6Date of test: 3/06/2004Product: DecorLux Max
Sample tested in the following configuration:
Surface panel: DecorLux MaxMaterial: Fibre-Cement with DecorSorb backingPanel thickness: 6mmPanel type: AL1000S/570Open area: 25.5%Insulation: NoneAir gap under panel: 90mmSample size: 8.64 square metres
The perimeter of the sample was enclosed with an MDF frame.
Table 8
NRC = 0.60
Graph 8
decorLux Max
34
acoustic graphs 1/5/07 3:32 PM Page 35
Frequency(Hertz)
100125160200250315400500630800
10001250160020002500315040005000
0.550.750.700.600.750.750.700.600.650.650.600.550.550.500.500.450.450.45
SoundAbsorptionCoefficient
(Alpha)
Test Method: AS 1045-1988, MEASUREMENT OF SOUND ABSORPTION IN A REVERBERATION ROOM.
RMIT Test No.: 121I/04-069/PDReport No.: A03RMST1Test No.: A03D44RMV1Date of test: 1/06/2004Product: DecorSlot
Sample tested in the following configuration:
Surface panel: DecorSlotMaterial: Fibre-Cement with DecorSorb backingPanel thickness: 6mmPanel type: DecorSlotOpen area: 10%Insulation: NoneAir gap under panel: 400mmSample size: 8.64 square metres
The perimeter of the sample was enclosed with an MDF frame.
Table 26
NRC = 0.60
Graph 26
decorSlot
35
acoustic graphs 1/5/07 3:32 PM Page 36
Frequency(Hertz)
100125160200250315400500630800
10001250160020002500315040005000
0.850.850.750.750.850.800.750.750.800.750.750.700.650.600.550.550.500.50
SoundAbsorptionCoefficient
(Alpha)
Test Method: AS 1045-1988, MEASUREMENT OF SOUND ABSORPTION IN A REVERBERATION ROOM.
RMIT Test No.: 121I/04-069/PDReport No.: A03RMST1Test No.: A03D44RMV2Date of test: 2/06/2004Product: DecorSlot
Sample tested in the following configuration:
Surface panel: DecorSlotMaterial: Fibre-Cement with I.A.B. backingPanel thickness: 6mmPanel type: DecorSlotOpen area: 10%Insulation: R-2.5 polyester, mounted directly under panel faceAir gap under panel: 400mmSample size: 8.64 square metres
The perimeter of the sample was enclosed with an MDF frame.
Table 27
NRC = 0.75
Graph 27
decorSlot
36
acoustic graphs 1/5/07 3:32 PM Page 37
Absorption Material Specifications
Appendix 1
Decor Systems Product Reference Product Specifications
A8210, 25mm Insulation 25mm polyester @ 28kg/m3
A8225, 65mm Dual Density Insulation65mm dual layer polyester, comprising
40mm face layer @20kg/m3 and 25mm backlayer @ 40kg/m3
ATK3 Insulation 65mm polyester @ 7.7kg/m3
37
acoustic graphs 1/5/07 3:32 PM Page 38
Decor Systems AustralasiaThe Silverwater Estate6 Millennium Court,Silverwater NSW 2128
Tel: (02) 9748 1800Fax: (02) 9648 1800Email: [email protected]
Copyright: Information, graphs and templates are subject to copyright. These are not to be produced or copied without the written permission from Decor Systems Australasia.