open development lab conformance final report...

This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client.

Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any

party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report.

Only the Client is authorized to copy or distribute this report and then only in its entirety. Any use of the Intertek name or one of its

marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The

observations and test results in this report are relevant only to the sample tested. This report by Itself does not imply that the material,

product, or service is or has ever been under an Intertek certification program.

Intertek Testing Services NA, Inc.

731 Enterprise Drive

Lexington, KY 40510

Telephone: 859-226-1000

Facsimile: 859-226-1040

www.intertek-etlsemko.com

Open Development Lab Conformance Final

Report

Verizon Wireless

180 Washington Valley Drive

Bedminster, NJ 07921

Maestro Wireless

E206XT

VZW10000059

OTAID: Mob_Firm_Rev = 101

Mob_Model = 15

IMEI: A10000330069DB

OD Portal Device ID – 2265

Tested to:

Verizon Wireless Requirements specified in TECC’s:

E206XT_OD_TECC_Ver_7 dated: 05/28/2015

Date: September 1, 2015

Job: G102228303

Report: 102228303LEX-01

Prepared By: _________________________________________Date: 9/1/2015

Lane Linville, Wireless Engineering Supervisor

Approved By: ________________________________________Date: 9/1/2015

Gwyn Bernot, Wireless Director

Intertek Evaluation for: Verizon Wireless

Product: Maestro Wireless E206XT 9/1/2015

Report: 102228303LEX-01 of 13 Final Report

Table of Contents

SECTION 1 - INTRODUCTION ................................................................................................................. 5

1.1 - EVALUATION STANDARDS .................................................................................................................... 5 1.2 - PRODUCT DESCRIPTION ........................................................................................................................ 5 1.3 - REPORT STATUS ................................................................................................................................... 5 1.4 - EVALUATION SUMMARY ...................................................................................................................... 5 1.5 - EVALUATION EQUIPMENT ..................................................................................................................... 6 1.6 - SAMPLE SELECTION .............................................................................................................................. 8 1.7 - TEST REQUIREMENTS ........................................................................................................................... 9 1.8 - ENGINEERING COMMENTS .................................................................................................................... 9 1.9 - FAILURE HISTORY ................................................................................................................................ 9 1.10 - MEASUREMENT UNCERTAINTY .......................................................................................................... 9 1.11 - CONTACT INFORMATION .................................................................................................................... 9

SECTION 2 – 1X RF PARAMETRIC: IS-2000 AND IS-95 TESTING ................................................. 10

2.1 – 1X RF PARAMETRIC: IS-2000 AND IS-95 TESTING ............................................................................ 10

SECTION 3 – 1XEVDO: PARAMETRICS REV A TESTING .............................................................. 11

3.1 – 1XEVDO: PARAMETRICS REV A TESTING ......................................................................................... 11

SECTION 4 – CDMA DATA SESSION THROTTLING AND RETRY TESTING ............................. 12

4.1 – CDMA DATA SESSION THROTTLING AND RETRY TESTING ............................................................... 12




INDEX OF TABLES








INDEX OF FIGURES








Section 1 - Introduction

1.1 - Evaluation Standards

The EUT was evaluated to the required portions of VZW Compliance Test Plans as

specified by TECC’s: E206XT_OD_TECC_Ver_7.

1.2 - Product Description

The Maestro Wireless E206XT supports CDMA (1xRTT and EVDO) . This

device contains a Sierra Wireless SL9090.

1.3 - Report Status

This report is a Final report. It contains all results for the evaluation for the product

described in section 1.2 and characterized in section 1.1 of this report.

1.4 - Evaluation Summary

Table 1.4.1 contains a summary of the passing and failing sections in this report.

A section is identified as a ‘Failure’ if any out of specification measurements are

observed. Please refer to the appropriate section for details regarding observed

measurements.

Table 1.4.1 - Evaluation Summary

Test Plan Total Test Cases Passed Failed

Not

Supported N/A

Waived % Complete % Passed

CDMA 1xRTT and EVDO Test Plans

1x RF Parametric: IS-2000 and IS-95 912 906 61

0 0 0 100.00% 99.34%

1xEVDO: Parametrics Rev A 252 252 0 0 0 0 100.00% 100.00%

CDMA Data Session Throttling and Retry 6 6 0 0 0

0 100.00% 100.00%

1 These failures are Access Probe Output power measurements that are non critical and consist only of level

failures. The actual probe numbers and incrememnts are correct with no major overshoot of Max power.




1.5 - Evaluation Equipment

Table 1.5.1 contains a summary of the test equipment, firmware and software used

in this evaluation. The ITS Local Work Instructions contain the details of test

setup for each test sub-section. Where appropriate, equivalent alternate

equipment may be substituted and a notation to that effect will be placed in the

affected test section.

Table 1.5.1 - Evaluation Equipment Summary

Spirent/Agilent/Aeroflex

Test Equipment Serial

Number

Hardware/Firmware

Version Controlling Software

Agilent E4407B Spectrum Analyzer US41442998 A.14.03

Taskit C2K 5.31.003

AirAccess 2.86.001

AirAccess 3.10.012

Taskit PLTS 3.11.003

SimGen V2.70 SR01

Agilent E5515C Base Station

Simulator GB42100221

E1962B B.11.06 / E6702A

A.02.20

Spirent SR3452 V2 CDMA Network

Emulator TNE310H2 2.86.001/2.02.002/2.02.014


Emulator TNE310G3 2.86.001/2.02.002/2.02.014

Spirent SR3462 EV-DO Network

Emulator EVA310W4 SR3452U-SC

Spirent TAS 5048 Test Configuration

Unit TCU260G2 4.0 2.0

Spirent SR 5500 Wireless Channel

Emulator WCE260J4 02.30.34

Spirent TAS 5600 Universal

Interference Emulator AIG260F5 1.51

Agilent 3499B Switch Control System MY42000390 4.0 2.0

Spirent TAS GSS 5060 GSS1266 1.0

Spirent TAS 3710 PDE Asset 012520 4.3

Agilent E4407B Spectrum Analyzer MY41444814 A.14.03

Taskit C2K 5.31.003

AirAccess 2.86.001

AirAccess 3.10.012

TestDrive EV-DO

4.40.005



E1962B B.11.06 / E1966A

A.05.11


Emulator TNE310G1 2.86.001/2.02.002/2.02.014


Emulator TNE310G4 2.86.001/2.02.002/2.02.014


Unit TCU250A4 4.2 2.0


Unit DCU300Q3 4.2 2.0


Emulator WCE260J4 03.01.78

Agilent E4438C ESG Vector Signal

Generator MY45095329 C.04.95



Agilent 3499A Switch Control System MY42003288 4.2 2.0

Agilent E4402B Spectrum Analyzer MY45114117 A.14.03

Taskit C2K 5.31.003

TestDrive EV-DO

4.40.005



E1962B B.13.08 / E6706A

A.05.09


Unit TCU300K5 4.2 2.0




Test Equipment Serial

Number

Hardware/Firmware

Version Controlling Software


Unit DCU300R2 4.2 2.0


Emulator WCE290V2 02.30.34





Agilent 3499A Switch Control System MY42003283 4.2 2.0

Spirent TAS 3460 EVDO Network

Emulator EVE280F3 2.3

TestDrive Data 1.41

TestDrive Data 2 2.20

TestDrive SC

1.81.100.009

AirAccess 2.86.001

AirAccess 3.10.012

OR

QuickProbe 3.7

QDAAT 2.6.0

AirAccess 2.86.001

AirAccess 3.10.012

Spirent TAS 3452 V2 CDMA Network

Emulator TNE280K4 2.3

Spirent TAS 3452 V2 CDMA Network

Emulator TNE280N1 2.70.100


Emulator WCE281A5 02.01.01


Simulator GB44051794 E1962B B.11.06

QuickProbe 3.7 Agilent E5515C Base Station




Agilent 66319D DC Power Supply MY43001080 N/A 14565A Ver. A.04.04

B&K 3560C Pulse Frame 2454355 N/A

BK6711 2.15

Pulse 10.1.0.15

B&K 2716 Audio Amplifier 990-415 N/A

B&K 4128C Head and Torso

Simulator 2341613 N/A

B&K 4136 Microphone 1304725 N/A

B&K 2633 Pre-Amplifier 1303547 N/A

B&K 4230 Calibrator 1639154 N/A

Kiethley 2304 DC Power Supply 673281 N/A N/A

Aeroflex 6304 Base Station Simulator 4834 N/A CDMA-AIME Core

Components Ver 8.02.06

C.S0031 2007.04.01

C.S0038 2008.04.01

C.S0043 2008.04.01

C.S0060 2008.05.01

C.S0073 2007.09.01

WPS 2007.08.01

A12 2006.11.01

Aeroflex 6304 Base Station Simulator 4501 N/A

Aerolex 6204 CDMA-Protocol Test

System 1153 N/A




1.6 - Sample Selection

The sample evaluated was provided to Intertek by the manufacturer. Intertek

received first run production samples on 07/29/2015 in normal working condition.

Table 1.6.1 provides details of the sample tested.

Table 1.6.1 - Equipment Under Test Details

Parameter Value

FCCID N7NSL9090

Device Hardware Revision V06

Device Software Revision 2.0.0

Module Hardware Revision 4

Module Software Revision SWI6600V_02.00.00.07AP

Device IMEI A10000330069DB

Cable Loss CDMA BC0 Loss: 0.0 dB

CDMA BC1 Loss: 0.0 dB




1.7 - Test Requirements

Test requirements are stated of required portions of VZW Compliance Test Plans as

specified by TECC’s: E206XT_OD_TECC_Ver_7.

1.8 - Engineering Comments

Non critical failures in CDMA Access Probe Output Power were observed. All

critical elements of the test were compliant. Only the expected power level failures

at -90 dBM were noted.

1.9 - Failure History

No changes were made to the HW or SW of the devices during the course of

testing.

1.10 - Measurement Uncertainty

The measurement methods and inherent results detailed in this evaluation are

within the normative limits defined within the specific standard of each section,

where applicable. Furthermore, detailed uncertainty budgets are maintained on

file and are available upon request.

1.11 - Contact Information

Justin Harbour Ron Bernot

Engineering Manager Engineering Manager

859-226-1056 859-226-1018

[email protected] [email protected]

mailto:[email protected]

mailto:[email protected]




Section 2 – 1x RF Parametric: IS-2000 and IS-95 Testing

2.1 – 1x RF Parametric: IS-2000 and IS-95 Testing

2.1.1 - Summary Results

The EUT was not compliant with requirements of 1x RF Parametric: IS-

2000 and IS-95 Conformance Test Plan.

2.1.2 - Test Results

Table 2.1.1 – 1x RF Parametric: IS-2000 and IS-95 Test Results

Test Description

Test

Count A10000330069DB Comments

Receiver Sensitivity and Dynamic Range 42 Passed

CDMA to CDMA Hard Handoff 4 Passed

Reverse Pilot to Code Channel Time Tolerance 12 Passed

Reverse Pilot to Code Channel Phase Tolerance 12 Passed

Waveform Quality and Frequency Accuracy 45 Passed

Code Domain Power 12 Passed

Range of Open Loop Output Power 12 Passed

Time Response of Open Loop Power Control 80 Passed

Access Probe Output Power 72 Failed

Non

Critical

Failures

Range of Closed Loop Power Control 204 Passed

Maximum RF Output Power 30 Passed

Minimum Controlled Output Power 18 Passed

Standby Output Power and Gated Output Power 21 Passed

Code Channel to Reverse Pilot Channel Output Power

Accuracy 132 Passed

(TX) Conducted Spurious Emissions 216 Passed




Section 3 – 1xEVDO: Parametrics Rev A Testing

3.1 – 1xEVDO: Parametrics Rev A Testing


The EUT was compliant with requirements of 1xEVDO: Parametrics Rev

A Conformance Test Plan.


Table 3.1.1 – 1xEVDO: Parametrics Rev A Test Results

Time Description

Test

Count A10000330069DB Comments

RX Sensitivity 9 Passed

Frequency Accuacy 3 Passed

Time Reference 3 Passed

WFQ 9 Passed

Range of open loop 18 Passed

Time response of open loop 12 Passed

Range of Closed Loop 99 Passed

Max power 3 Passed

Minimum Power 3 Passed

Standby and Gated output power 6 Passed

RRI Channel output power 3 Passed

DRC Channel Ouput 6 Passed

ACK Channel Output Power 6 Passed

Data Channel Output 24 Passed

DSC Channel Output power 6 Passed

TX spurious Emissions 42 Passed




Section 4 – CDMA Data Session Throttling and Retry Testing

4.1 – CDMA Data Session Throttling and Retry Testing


4.1.2 The EUT was compliant with requirements of CDMA Data Session

Throttling and Retry Test Plan.


Table 4.1.1 – CDMA Data Session Throttling and Retry Results

Test

Name Test Description Result Comments Tester Info

3.1 1xRTT Paging Channel Failure: "Intercept Order" Message Passed

Jeremy Peace

3.7 1xRTT IP Related Failure: AAA Authentication Failure Passed

Jeremy Peace

3.11 1xRTT IP Related Failure: MIP RRQ Failure Passed

Jeremy Peace

4.5 EV-DO IP Related Failures: Authentication Failure Passed

Jeremy Peace

4.9 EV-DO IP Related Failures: MIP RRQ Failure Passed

Jeremy Peace

5.1

Multi-system AAA Authentication failure (EV-DO Hybrid

Mode) Passed

Jeremy Peace




Appendix A - Photograph of EUT

Figure A.1 - EUT Front View

open development lab conformance final report...

Documents