opening the app · web viewharrison cricket apps t20 users guide table of contents opening the app6...

Harrison Cricket AppsT20 Users Guide

Table of Contents of 110 Harrison Cricket Apps © T20 Users Guide

Opening the App.........................................................................................................6

Entering Teams...........................................................................................................7

Entering new teams...........................................................................................................................7

Entering existing teams...................................................................................................................14

Re-enter Team One’s data...........................................................................................................14

Re-enter Team Two’s data...........................................................................................................15

Swap Teams.................................................................................................................................16

Reset App........................................................................................................................................17

Exit App...........................................................................................................................................18

Score Entry...............................................................................................................19

Using a mouse.................................................................................................................................19

Using a touch screen.......................................................................................................................20

Team One.................................................................................................................21

The First innings...............................................................................................................................21

Scores Tab – Pre-set values.........................................................................................................21

First Tab – Pre-set values.............................................................................................................22

Comparison Tab – Pre-set values.................................................................................................24

Scores Tab First innings – Starting the innings.................................................................................25

First Tab First innings – Starting the innings....................................................................................27

First Tab First innings Auto Calculation............................................................................................28

Scores Tab First innings five overs...................................................................................................29

First Tab First innings five overs.......................................................................................................31

Comparison Tab First innings five overs..........................................................................................32

First innings graphs five overs.........................................................................................................34

Scores Tab First innings ending the innings.....................................................................................36

Allotted overs completed............................................................................................................36

First Tab First innings ending the innings.........................................................................................38


Comparison Tab First innings ending the innings............................................................................40


First innings graphs Allotted overs completed.................................................................................41

Scores Tab First innings ending the innings.....................................................................................42

Team One bowled out.................................................................................................................42

First Tab First innings ending the innings.........................................................................................44


Comparison Tab First innings ending the innings............................................................................46


First innings graphs Team One bowled out.....................................................................................47

Team Two.................................................................................................................48 of 110 Harrison Cricket Apps © T20 Users Guide

Scores Tab Second innings...............................................................................................................48

Second Tab Second innings.............................................................................................................48

Comparison Tab Second innings......................................................................................................48

The Second innings run chase..........................................................................................................49

Scores Tab Second innings five overs..............................................................................................51

Second Tab Second innings five overs.............................................................................................53

Comparison Tab Second innings five overs......................................................................................55

Second innings graphs five overs.....................................................................................................56

Scores Tab Second innings ending the innings................................................................................57

Allotted overs completed Team One winning..............................................................................57

Second Tab Second innings ending the innings...............................................................................59


Comparison Tab Second innings ending the innings........................................................................61


Second innings graphs Team One Winning......................................................................................62


Team Two winning target reached..............................................................................................63





Second innings graphs Team Two winning......................................................................................68


Team Two bowled out.................................................................................................................69





Second innings graphs Team Two bowled out................................................................................74


Tied game....................................................................................................................................75


Tied game....................................................................................................................................77


Tied game....................................................................................................................................79

Second innings graphs Tied game....................................................................................................80

Last Game.................................................................................................................81

Revised target and overs..........................................................................................83

First innings delays..........................................................................................................................83 of 110 Harrison Cricket Apps © T20 Users Guide

Scores Tab Event 1.......................................................................................................................84

First Tab Event 1..........................................................................................................................85

Comparison Tab Event 1..............................................................................................................86

Using the App Event 1.................................................................................................................86

Scores Tab Event 2.......................................................................................................................87

First Tab Event 2..........................................................................................................................88



Scores Tab Event 3.......................................................................................................................90

First Tab Event 3..........................................................................................................................92


Second innings.................................................................................................................................95

Setting Revised target and overs.................................................................................................95

Second innings delays......................................................................................................................96

Scores Tab Event 1.......................................................................................................................97

Second Tab Event 1......................................................................................................................98



Scores Tab Event 2.....................................................................................................................100

Second Tab Event 2....................................................................................................................101

Comparison Tab Event 2............................................................................................................102

Using the App Event 2...............................................................................................................102

Scores Tab Event 3.....................................................................................................................103

Second Tab Event 3....................................................................................................................104

Comparison Tab Event 3............................................................................................................105

Trouble shooting.....................................................................................................106

Full Allotted overs..........................................................................................................................106

Enter Team Tab..........................................................................................................................106

Scores Tab..................................................................................................................................106

First Tab.....................................................................................................................................106

Second Tab................................................................................................................................107

Comparison Tab.........................................................................................................................107

Graphs...........................................................................................................................................108

Revised target and overs First innings...........................................................................................109

Scores Tab Event 1.....................................................................................................................109

Scores Tab Event 2.....................................................................................................................109

Scores Tab Event 3.....................................................................................................................109

Revised target and overs Second innings......................................................................................110

Scores Tab Event 1.....................................................................................................................110 of 110 Harrison Cricket Apps © T20 Users Guide

Scores Tab Event 2.....................................................................................................................110

Scores Tab Event 3.....................................................................................................................110

Opening the App

of 110 Harrison Cricket Apps © T20 Users Guide

1. Click on or tap the Start button.

2. Scroll down the left pane until H.

3. Click on or tap the HSA T20 app icon.

Entering Teams


Entering new teams

For example the first game of a head to head series between two countries or a game that is part of a multiple team tournament such as a world cup or domestic competition.

For this example Team One and Team Two will be used as opposed to team or country names.

Step 1. Enter Team One’s name

1. Click on or tap the Enter team name text box within the Batting first group box.

2. Enter team name (maximum 20 characters) refer to Illustration 1 below.

Batting first group box Enter team name text box

Illustration 1

Entering Teams


Entering new teams

Step 2. Set Team One’s back colour

1. Locate Set back colour tab control. Tab pages are numbered 1 to 6. Each tab page displays 36 different colours giving a total of 216 colours.

2. Click on or tap each of the tab pages numbered 1 to 6 to display all 216 colours.

3. Choose Team One’s back colour by clicking on or taping the radio button that best games Team One’s back colour.

4. When a radio button is clicked on or taped a larger area next to the Set back colour tab control is displayed in the chosen colour to signify that a colour has been selected.

5. For this example the back colour will be set to Red from tab page 1 refer to Illustration 2 below.

Set back colour tab control Red radio button selected

Illustration 2 Display area

Entering Teams


Entering new teams

Step 3. Set Team One’s fore colour

1. Locate Set fore colour tab control. Tab pages are numbered 1 to 6. Each tab page displays 36 different colours giving a total of 216 colours.

2. Click on or tap each of the tab pages numbered 1 to 6 to display all 216 colours.

3. Choose Team One’s fore colour by clicking on or taping the radio button that best games Team One’s fore colour.

4. When a radio button is clicked on or taped a larger area next to the Set fore colour tab control is displayed in the chosen colour to signify that a colour has been selected.

5. For this example the fore colour will be set to Dark Green from tab page 6 refer to Illustration 3 below.

Set fore colour tab control Dark Green radio button selected

Illustration 3 Display area

Entering Teams


Entering new teams

Step 4. Update Team One and preview

1. To complete entering Team One’s name and setting the back and fore colours click on or tap the Update button refer to Illustration 4 below.

2. This will display Team One’s name and the back and fore colours in a preview area to enable the contrast of the colours to be checked. If the back and fore colours are to similar set one darker and the other lighter.

3. When the Update button is clicked on or taped the App writes a small text file that is stored on the hard drive of the device on which the App is installed on. This is to save time if Team One’s data is to be re-entered at a later date by clicking on or taping the Last Team button.

Update button Preview area

Illustration 4 Last Team button

This completes the entering Team One process.

Entering Teams


Entering new teams

Step 5. Reset Batting first group box

1. If while entering the data for Team One a mistake has been made or new data is required to be entered.

2. Simply click on or tap the Reset button within the Batting first group box message box 3 will appear refer to Illustration 5 below.

3. The App will be disabled while message box 3 appears so no other data can be entered or another button clicked on or tapped.

4. Click on or tap the OK button to reset Team One’s entries and enable the App.

Message box 3

Illustration 5

Entering Teams


Entering new teams

Step 6. Enter Team Two’s name and set back and fore colours

1. To enter Team Two’s name and set back and fore colours repeat the above Steps 1 to 4 in the Batting second group box refer to Illustration 6 below.

2. For this example the back colour will be set to Yellow from tab page 1.

3. For this example the fore colour will be set to Blue from tab page 6.

Batting second group box Yellow radio button selected

Illustration 6 Blue radio button selected

This completes the entering Team Two process.

Once both teams’ data is entered a keyboard is no longer required. The App only requires a mouse or to be tapped on.

Proceed to the Score entry section of this users guide page 19.

Entering Teams


Entering new teams

Step 7. Reset Batting second group box

1. If while entering the data for Team Two a mistake has been made or new data is required to be entered.

2. Click on or tap the Reset button within the Batting second group box message box 6 will appear refer to Illustration 7 below.


4. Click on or tap the OK button to reset Team Two’s entries and enable the App.

Message box 6

Illustration 7

Entering Teams


Entering existing teams

For example the second game of a head to head series between two countries.

Re-enter Team One’s data

1. Last team must be used before any team data is entered into the App or all team data will be overwritten and the last team data will be lost.

2. Click on or tap the Last Team button within the Batting first group box to enter the Last Team’s data refer to Illustration 8 below.

3. The Update button will automatically be clicked on and the data updated.

Last Team button

Illustration 8

Entering Teams

Entering existing teams of 110 Harrison Cricket Apps © T20 Users Guide

Re-enter Team Two’s data

1. Last team must be used before any team data is entered into the App or all team data will be overwritten and the last team data will be lost.

2. Click on or tap the Last Team button within the Batting second group box to enter the Last Team’s data refer to Illustration 9 below.

3. The Update button will automatically be clicked on and the data updated.

Last Team button

Illustration 9

If after the toss of the next game in a head to head series the batting order is the same as the previous game then proceed to the Score Entry section of this users guide page 19.


If after the toss the batting order is the reverse of the previous game then proceed to the Swap Teams section of this users guide page 16.

Entering Teams

Entering existing teams of 110 Harrison Cricket Apps © T20 Users Guide

Swap Teams

1. Click on or tap the Swap Teams button refer to Illustration 10 below.

Team Two swapped Team One swapped

Illustration 10 Swap Teams button


Proceed to the Score Entry section of this users guide page 19.

Entering Teams


Reset App

1. Click on or tap the Reset App button message box 7 will appear refer to Illustration 11 below.


3. Click on or tap the OK button to reset the App and enable the App.

Message box 7

Illustration 11

Entering Teams


Exit App

1. Click on or tap the Exit App button message box 8 will appear refer to Illustration 12 below.


3. Click on or tap the OK button to exit the App.

Message box 8

Illustration 12

Score EntryUsing a mouse


Scores are entered into the App via combo boxes with pre-set values for ease of use.

1. Click on the Scores Tab.

2. Click on the required combo box and scroll the mouse wheel down and stop at the required value refer to Illustration 13 below.

Runs combo box Scores Tab

Illustration 13

Score Entry


Using a touch screen

Scores are entered into the App via combo boxes with pre-set values for ease of use.

1. Tap the Scores Tab.

2. Tap on the drop down arrow at the left side of the required combo box to expand the pre-set values and select the required value refer to Illustration 14 below.

Runs combo box expanded Scores Tab

Illustration 14

Team One


The First innings

In this section of the user’s guide there is no reference to T20 games where the target is revised and the allotted overs have been reduced. This section of the user’s guide is based on the full allotment of 20 overs. Revised target and overs has its own section. If there is a time delay before or during the First innings refer to the Revised target and overs section of this user’s guide page 83.

For ease of use it is recommended that Team One’s score only be entered and calculated at the end of every over in the Scores Tab and the First Tab and every five overs in the Comparison Tab. Scores are entered via combo boxes with pre-set values.

Note: Team Two’s Second innings score entry combo boxes will not be visible until Team One’s First innings is completed.

Scores Tab – Pre-set values

Scores Tab Team One’s First innings score entry contains 4 combo boxes as follows.

1) 1 for runs2) 1 for wickets3) 1 for overs4) 1 for balls

Refer to Illustration 15 below.

Illustration 15

The Scores Tab Team One’s First innings combo boxes have the following pre-set values.

Runs: Pre-set values 0 to 400Wickets: Pre-set values 0 to 10Overs: Pre-set values 0 to 20Balls: Pre-set values 0 to 6

Recommendation: The combo box is only required to be used if Team One is bowled out before their allotted overs, or Team two wins.

Team One


First Tab – Pre-set values

Note: The First Tab will not be visible until the score has been entered into the First innings section of the Scores Tab and calculated.

First Tab Team One’s score entry contains 4 group boxes. Each group box has 2 columns of combo boxes as follows.

1) 1 column for Runs abbreviated to R x 5 rows2) 1 column for Wickets abbreviated to W x 5 rows3) 1 combo box for Overs.4) 1 combo box for Powerplay Overs.


Illustration 16

Team One


First Tab – Pre-set values

The First Tab Team One’s combo boxes have following pre-set values.

Group box – Five overs

Runs abbreviated to R numbered 1 to 5: Pre-set values 0 to 50Wickets abbreviated to W numbered 1 to 5: Pre-set values 0 to 6

Group box – Ten overs


Group box – Fifteen overs


Group box – Twenty overs


Overs: Pre-set values 0 to 20

Powerplay Overs: Pre-set values 0 to 6

Team One


Comparison Tab – Pre-set values

Note: The Comparison Tab will not be visible until the score has been entered into the First innings section of the Scores Tab and calculated.

The Comparison Tab contains 4 group boxes with 3 combo boxes as follows.

1) 1 for Runs abbreviated to R2) 1 for Wickets abbreviated to W3) 1 for Overs abbreviated to O


Illustration 17

The Comparison Tab Team One’s combo boxes have following pre-set values.

Group box – Five oversRuns abbreviated to R: Pre-set values 0 to 100Wickets abbreviated to W: Pre-set values 0 to 10Overs abbreviated to O: Pre-set values 0 to 5

Group box – Ten oversRuns abbreviated to R: Pre-set values 0 to 200Wickets abbreviated to W: Pre-set values 0 to 10Overs abbreviated to O: Pre-set values 0, 5 to 10

Group box – Fifteen oversRuns abbreviated to R: Pre-set values 0 to 300Wickets abbreviated to W: Pre-set values 0 to 10Overs abbreviated to O: Pre-set values 0, 10 to 15

Group box – Twenty oversRuns abbreviated to R: Pre-set values 0 to 400Wickets abbreviated to W: Pre-set values 0 to 10Overs abbreviated to O: Pre-set values 0, 15 to 20

Team One


Scores Tab First innings – Starting the innings

The score entries in this user’s guide are examples only and are to be replaced with the actual game scores when using the App. For this example runs will be set to 7, wickets will be set to 1, overs will be set to 1 and balls will remain at 0.

1. At the end of over 1 click on or tap the Runs combo box and enter the current runs.

2. If no wicket has fallen go to step 3. If a wicket has fallen then click on or tap the Wickets combo box and enter the current wickets.

3. Click on or tap the Overs combo box and enter the current overs. If the first over is a maiden over i.e. no runs were scored, the Overs combo box must be set to 1 and calculated otherwise the First tab and the Comparison tab will not be visible.

4. Click on or tap the First innings Calculate button. This action will calculate and display the following information refer to Table 1 and Illustration 18 below.

Current run rate Current runs 7 divided by current overs 1 = 7.00

Overs remaining Allotted overs 20 minus current overs 1 = 19

Balls remaining Overs remaining 19 multiplied by 6 = 114Wickets in hand 10 minus current wickets 1 = 9Projected total at current run rate Overs remaining 19 multiplied by current

run rate 7 = 133 plus Current runs 7 = 140Projected total at 8.00 runs per over Overs remaining 19 multiplied by 8 runs per

over = 152 plus Current runs 7 = 159Projected total at 9.00 runs per over Overs remaining 19 multiplied by 9 runs per

over = 171 plus Current runs 7 = 178Projected total at 10.00 runs per over

Overs remaining 19 multiplied by 10 runs per over = 190 plus Current runs 7 = 197

Projected total at 11.00 runs per over






Table 1

5. Projected totals at 8.00 runs per over through to 13.00 runs per over will automatic adjust as the run rate increases or decreases.

6. Continue to enter and calculate the scores at the end of every over until all the allotted overs are completed or Team One is bowled out. Refer to Illustration 18 below.

Team One


Scores Tab First innings – Starting the innings

Calculate button

Illustration 18 Wicket dots

1. As a wicket is taken the letter “W” will be displayed in the corresponding dot.

2. The letter “W” and dot are in the apposing team colours.

Team One


First Tab First innings – Starting the innings

For this example runs will be set to 7, wickets will be set to 1, overs will be set to 1.

1. Click on or Tap the First Tab.



4. Click on or tap the Overs combo box and enter the current overs. If the first over is a maiden over i.e. no runs were scored, the Overs combo box must be set to 1.

5. Click on or tap the First Calculate button. This action will calculate and display the following information refer to Table 2 and Illustration 19 below.

6. Powerplay overs combo box is set to 6 by default unless the target and overs are revised. Revised target and overs has its own section on page 83.

Score 7 runs – 1 wicketRun rate Runs 7 divided by current overs 1 = 7.00Last five Will not be displayed until over 5Last five run rate Will not be displayed until over 5

Table 2

Calculate button

Illustration 19Team One


First Tab First innings Auto Calculation

Recommendation: Use the Auto Calculation function.


2. Turn on Auto Calculate by clicking on or taping the Auto Calculate check box.

3. Once the Auto Calculation function is set to on this will automatically update the overs combo box, calculate and display the current score.

4. For example when entering the runs for over 2, simply click or tap on over 2 runs combo box scroll down until the scored displayed is 16 – 1.

5. When 16 – 1 is displayed the correct amount of runs in over 2 combo box will be entered which is 9.

6. The same functionality applies to all combo boxes in the First Tab.

7. For example when entering the wickets for over 2, simply click or tap on over 2 wickets combo box scroll down until the scored displayed is 16 – 2.

8. When 16 – 2 is displayed the correct amount of wickets in over 2 combo box will be entered which is 1.

9. Continue to enter and calculate the scores at the end of every over until all the allotted overs are completed or Team One is bowled out. Refer to Illustration 20 below.

Overs Combo box Runs Wickets Powerplay

Illustration 20 Current score display Auto Calculate check box

Team One


Scores Tab First innings five overs

Continue to enter the score at the end of each over as follows up until over 5.

1. Click on or Tap the Scores Tab.

2. At the end of each over click on or tap the Runs combo box and enter the current runs.


4. Click on or tap the Overs combo box and enter the current overs. If an over is a maiden over i.e. no runs were scored, the Overs combo box must be set to the current overs and calculated otherwise the incorrect information will be displayed.

5. For this example runs will be set to 42, wickets will be set to 2, overs will be set to 5 and balls will remain at 0.


Current run rate 8.40Overs remaining 15Balls remaining 90Wickets in hand 8Projected total at current run rate 168Projected total at 9.00 runs per over 177Projected total at 10.00 runs per over 192Projected total at 11.00 runs per over 207Projected total at 12.00 runs per over 222Projected total at 13.00 runs per over 237Projected total at 14.00 runs per over 252

Table 3

7. Projected totals at 9.00 runs per over through to 14.00 runs per over will automatic adjust as the run rate increases or decreases. However they will always start above the current run rate.

Team One


Scores Tab First innings five overs

Illustration 21

Team One


First Tab First innings five overs



2. With the Auto Calculate function set to on overs are updated automatically provided either the Runs or Wickets combo boxes are updated. There is no need to click on or tap the First Calculate button.

3. At the end of each over click on or tap the Runs combo box and watching the current score display scroll down until the current score is displayed.

4. If no wicket has been taken go to step 5. If a wicket has been taken then click on or tap the Wickets combo box and watching the current score display scroll down until the current score is displayed.

5. If an over is a maiden over i.e. no runs were scored and also no wickets have been taken, the Overs combo box must be set to the current overs.

6. The following information will be displayed refer to Table 4 and Illustration 22 below.

Score 42 – 2Run rate 8.40Last five 42 – 2Last five run rate 8.40

Table 4

Illustration 22

Team One


Comparison Tab First innings five overs

Recommendation: The Comparison Tab only requires to the have the score entered every five overs.

The Comparison Tab First Innings contains 4 group boxes with 3 combo boxes 1 for Runs abbreviated to R, 1 for Wickets abbreviated to W and 1 for Overs abbreviated to O.

Enter the score at the end of over 5 within the Five overs group box as follows.


1. Click on or Tap the Comparison Tab.



4. Click on or tap the Overs combo box and scroll down to 5.

5. Click on or tap the Comparison Calculate button. This action will calculate and display the following information at the end of over 5 refer to Table 5 and Illustration 23 below.

Progressive run rate Runs 42 divided by current overs 5 = 8.40Projected score at 5 overs Overs remaining 15 multiplied by current run rate

8.40 = 126 plus Current runs 42 = 168Comparison score 42 – 2 42 runs – 2 wicketsComparison overs 5Comparison run rate Runs 42 divided by overs 5 = 8.40

Table 5

As well as the above information being displayed. The values contained in the Five overs group box’s combo boxes are automatically transferred to the combo boxes of the Ten overs group box. This is to save time for when the Ten overs group box’s score is entered at the end of over 10. No information in the Ten overs group box will be calculate or displayed at this time. No further action is required until the end of over 10 refer to Illustration 23 below.

Continue to enter and calculate the scores every 5 overs until all the allotted overs are completed or Team One is bowled out. Refer to Illustration 23 below.

Team One


Comparison Tab First innings five overs

Five overs group box Progressive score section Ten overs group box

Illustration 23 Overs combo box Comparison score section

Team One


First innings graphs five overs

HSA T20 App displays 4 graphs which are calculated and displayed automatically when their respective tabs are clicked on or taped. They are as follows

1. The Manhattan graph (as it resembles the Manhattan sky line) is a column graph which displays the amount of runs for each individual over in a column. If a wicket being taken has been entered into the combo box for that over a dot will appear within the column.

2. The Innings graph is a linear graph which displays the current score in runs over by over. If a wicket being taken has been entered into the combo box for that over a dot will appear on the line of the linear graph.

3. The Run Rate graph is a linear graph which displays the average run rate over by over. If a wicket being taken has been entered into the combo box for that over a dot will appear on the line of the linear graph.

4. The Bar graph is a horizontal bar graph which displays the amount of runs for each 5 over increment they are as follows refer to Table 6 below.

Increment 1 0 to 5 oversIncrement 2 6 to 10 oversIncrement 3 11 to 15 oversIncrement 4 11 to 15 overs

Table 6

5. Click on or tap the Manhattan, Innings, Run Rate and Graph tabs after score entry and calculation as desired refer Illustration 24 below.

Team One


First innings graphs five overs

Manhattan graph Innings graph

Illustration 24 Run Rate graph Bar graph

Note: The Manhattan graph is displayed in reverse colours for the Powerplay overs i.e. the fore colour is the back colour and the back colour is the fore colour.

Team One


Scores Tab First innings ending the innings

Allotted overs completed







6. Click on or tap the First innings Calculate button.

7. With the First innings overs set to 20 this will end the First innings. Team Two’s Second innings combo boxes will now be visible refer to Illustration 25 below. Team Two’s Second innings run chase information will also be displayed.

Team One




First innings ended Second innings combo boxes visible

Illustration 25

Team One


First Tab First innings ending the innings




2. With the Auto Calculate function set to on overs are updated automatically provided either the runs or Wickets combo boxes are updated. There is no need to click on or tap the First Calculate button.

3. At the end of over 20 click on or tap the Runs combo box and watching the current score display scroll down until the current score is displayed.

4. If no wicket has been taken go to step 5. If a wicket has been taken then click on or tap the Wickets combo box and watching the current score display scroll down until the current score is displayed.

5. If an over is a maiden over i.e. no runs were scored and also no wickets have been taken, the Overs combo box must be set to the current overs.



Table 7

7. With the First innings overs set to 20 this will end the First innings. The Second Tab with Team Two’s Second innings combo boxes will now be visible refer to Illustration 27 below.

8. Click on or tap the Run Rate Tab with the First innings ended a straight white line will be displayed. This is the required Run Rate line that Team Two must maintain to win the game refer Illustration 29 page 41.

Team One




Overs combo box set to 20

Illustration 26

Second Tab and Second innings combo boxes visible

Illustration 27

Team One


Comparison Tab First innings ending the innings


Enter the score at the end of over 20 within the Twenty overs group box as follows.







Progressive run rate 9.65Final score at 20 overs 193Comparison score 64 – 1Comparison overs 5Comparison run rate 12.80

Table 8

6. With the First innings Twenty overs group box overs combo box set to 20 this will end the First innings. Team Two’s Second innings combo boxes will now be visible refer to Illustration 28 below.

7. This completes the score entry for Team One First innings based on the full allotment of 20 overs.

Team One




Twenty overs group box Overs set to 20

Illustration 28

First innings graphs Allotted overs completed


Illustration 29 Required Run Rate line Bar graph

Team One



Team One bowled out

Continue to enter the score at the end of each over as follows up until Team One is bowled out. This will end the First innings.



3. Click on or tap the Wickets combo box and enter the current wickets.


5. For this example runs will be set to 161, wickets will be set to 10, overs will be set to 17 and balls will be set at 3.


7. With the First innings wickets set to 10 this will end the First innings. Team Two’s Second innings combo boxes will now be visible refer to Illustration 30 below. Team Two’s Second innings run chase information will also be displayed refer to Team Two’s section of the user’s guide.

8. Team One First innings Final run rate calculation. Because Team One has been bowled out the Final run rate calculation is as follows.

161 runs divided by Allotted overs 20 = 8.05 refer to Illustration 30.

Note: The calculation of the Final run rate when a team is bowled out is their final score 161 runs divided by the allotted overs 20 not the amount of overs they were bowled out for.

Team One



Team One bowled out

First innings ended Second innings combo boxes visible

Illustration 30 Wickets set to 10 Final run rate

Team One



Team One bowled out

Continue to enter the score at the end of each over as follows up until Team One is bowled out. This will end the First innings. Do not enter scores past the over that Team One was bowled out. For this example no scores are to be entered in the combo boxes for overs 19 and 20.


2. With the Auto Calculate function set to on overs are updated automatically provided either the runs or Wickets combo boxes are updated. There is no need to click on or tap the First Calculate button.

3. At the end of each over click on or tap the Runs combo box and watching the current score display scroll down until the current score is displayed.

4. Click on or tap the Wickets combo box and watching the current score display scroll down until the current score is displayed.

5. If an over is a maiden over i.e. no runs were scored, the Overs combo box must be set to the current overs and calculated.



Table 9

7. With the First innings wickets set to 10 this will end the First innings. The Second Tab with Team Two’s Second innings combo boxes will now be visible refer to Illustration 32 below.

8. Click on or tap the Run Rate Tab with the First innings ended a straight white line will be displayed. This is the required Run Rate line that Team Two must maintain to win the game refer Illustration 34 page 47.


Team One



Team One bowled out

Current score display wickets set to 10

Illustration 31 No scores entered in the combo boxes for overs 19 and 20.


Illustration 32

Team One



Team One bowled out

Continue to enter the score at the end of each over as follows up until Team One is bowled out. This will end the First innings.




3. Click on or tap the Wickets combo box and scroll down to 10.


5. Click on or tap the Comparison Calculate button. This action will calculate and display the following information with wickets set to 10 refer Table 10 and Illustration 33 below.

Progressive run rate 8.05Final score at 18 overs 161Comparison score 27 – 3Comparison overs 3Comparison run rate 9.00

Table 10

6. With the First innings Twenty overs group box wickets combo box set to 10 this will end the First innings. Team Two’s Second innings combo boxes will now be visible refer to Illustration 33 below.

7. This completes the score entry for Team One First innings based on Team One being bowled out.


Team One



Team One bowled out

Twenty overs group box Wickets set to 10

Illustration 33

First innings graphs Team One bowled out


Illustration 34 Required Run Rate line Bar graph

Team Two


Scores Tab Second innings

Enter the scores for the Scores Tab Second innings the same way as the Scores Tab First innings.

Second Tab Second innings

Enter the scores for the Second Tab Second innings the same way as the First Tab First innings.

Comparison Tab Second innings

Enter the scores for the Comparison Tab Second innings the same way as the Comparison Tab First innings.

Team Two


The Second innings run chase

In this section of the user’s guide there is no reference to T20 games where the target is revised and the allotted overs have been reduced. This section of the user’s guide is based on the full allotment of 20 overs. Revised target and overs has its own section.

For ease of use it is recommended that Team Two’s score only be entered and calculated at the end of every over in the Scores Tab and the Second Tab and every five overs in the Comparison Tab. Scores are entered via combo boxes with pre-set values. Team Two’s Second innings combo boxes have the same pre-set values as Team One’s First innings combo boxes.

With the Team One’s First innings ended Team Two’s Second innings combo boxes will now be visible. Team Two’s Second innings run chase information will also be displayed as follows refer to Table 11 and Illustration 35 below.

Target Team One’s score 193 plus 1 = 194Overs remaining Allotted overs 20 minus current overs

0 = 20Balls remaining 20 overs multiplied by 6 balls = 120Runs to win Target 194 minus current runs 0 = 194Wickets in hand 10 minus current wickets 0 = 10Run rate at start Target 194 divided by allotted overs

20 = 9.70Required run rate Target 194 divided by allotted overs

20 = 9.70Required score Current overs 0 multiplied by Run rate at

start 9.7 = 0Gap between balls and runs at start Balls at start 120 minus Target

194 = minus 74Gap between current balls and runs Balls remaining 120 minus Runs to win

194 = minus 74

Table 11

Note: Required score is a guide only to what Team Two’s score should be at a certain point in the run chase.

Team Two


The Second innings run chase

Second innings combo boxes visible

Illustration 35

Team Two


Scores Tab Second innings five overs






5. For this example runs will be set to 30, wickets will be set to 2, overs will be set to 5 and balls will remain at 0


Current run rate 6.00Target 194Overs remaining 15Balls remaining 90Runs to win 164Wickets in hand 8Run rate at start 9.70Required run rate 10.93Required score 48Gap between balls and runs at start -74Gap between current balls and runs -74

Table 12

Team Two


Scores Tab Second innings five overs

Illustration 36

Team Two


Second Tab Second innings five overs

Continue to enter the score at the end of every over up until the end of over 5.

1. With the Auto Calculate function set to on overs are updated automatically provided either the Runs or Wickets combo boxes are updated.

2. The following information will be displayed for a comparison for Team One. This information will be displayed in Team One’s colours refer to Table 13 and Illustration 37 below.

Comparison Score 42 – 2Comparison run rate 8.40Comparison Last five 42 – 2Comparison Last five run rate 8.40

Table 13

3. The following information will be displayed for Team Two refer to Table 14 and Illustration 37 below.


Table 14

Team Two


Second Tab Second innings five overs

Team One’s Comparison information

Illustration 37

Team Two


Comparison Tab Second innings five overs

Enter the score at the end of over 5.


2. Enter the scores into the Five overs group box combo boxes.


Progressive run rate 6.00Required run rate 10.93Comparison score 30 – 2Comparison overs 5Comparison run rate 6.00

Table 15

Illustration 38

Team Two


Second innings graphs five overs



Team Two


Scores Tab Second innings ending the innings

Allotted overs completed Team One winning





4. With the Second innings overs set to 20 this will end the Second innings and the game. The following information will be displayed refer to Table 16 and Illustration 40 below.

Final run rate 7.25Target 194Overs remaining 0Balls remaining 0Team One won by 48 runsWickets in hand 4Run rate at start 9.70Required run rate 0.00Required score 194Gap between balls and runs at start -74Gap between current balls and runs -49

Table 16

Team Two




Second innings overs set to 20

Illustration 40

Team Two


Second Tab Second innings ending the innings






Table 17



Table 18

Team Two




Illustration 41

Team Two


Comparison Tab Second innings ending the innings


Continue to enter the score every 5 overs up until the end of over 20.



2. Enter the scores into the Twenty overs group box combo boxes.



Table 19

Illustration 42

Team Two


Second innings graphs Team One Winning



Team Two



Team Two winning target reached

Continue to enter the score at the end of every over up until Team two wins.




4. With the Team Two reaching the target this will end the Second innings and the game. The following information will be displayed refer to Table 20 and Illustration 44 below.

Final run rate 9.95Target 194Overs remaining 0Balls remaining 3Runs to win 0Team Two won by 4 WicketsRun rate at start 9.70Required run rate 0.00Required score 189Gap between balls and runs at start -74Gap between current balls and runs 0

Table 20

Team Two




Illustration 44

Team Two




Continue to enter the score at the end of every over up until Team two wins.




Table 21



Table 22

Team Two




Illustration 45

Team Two




Continue to enter the score every 5 overs up until Team two wins.




3. Click on or tap the Comparison Calculate button. This action will calculate and display the following information refer to Table 23 and Illustration 46 below.


Table 23

Illustration 46

Team Two


Second innings graphs Team Two winning



Team Two



Team Two bowled out

Continue to enter the score at the end of each over as follows up until Team Two is bowled out. This will end the Second innings and the game.


2. For this example runs will be set to 108, wickets will be set to 10, overs will be set to 16 and balls will be set to 4.


4. With the Second innings wickets set to 10 this will end the Second innings and the game. The following information will be displayed refer to Table 24 and Illustration 48 below.

Final run rate 5.40Target 194Overs remaining 3.2Balls remaining 20Team One won by 85 runsWickets in hand 0Run rate at start 9.70Required run rate 0.00Required score 162Gap between balls and runs at start -74Gap between current balls and runs -66

Table 24


Team Two



Team Two bowled out

Second innings wickets set to 10

Illustration 48

Team Two



Team Two bowled out

Continue to enter the score at the end of each over as follows up until Team Two is bowled out. This will end the Second innings and the game.


2. The following information will be displayed for a comparison for Team One.

This information will be displayed in Team One’s colours refer to Table 25 and Illustration 49 below.


Table 25



Table 26


Team Two



Team Two bowled out

Illustration 49

Team Two



Team Two bowled out

Continue to enter the score every 5 overs up until the Team Two is bowled out.




3. Click on or tap the Comparison Calculate button. This action will calculate and display the following information when Team Two is bowled out refer to Table 27 and Illustration 50 below.


Table 27


Illustration 50

Team Two


Second innings graphs Team Two bowled out



Team Two



Tied game





4. With the Second innings overs set to 20 this will end the Second innings and the game. The following information will be displayed refer to Table 28 and Illustration 52 below.

Final run rate 9.65Target 194Overs remaining 0Balls remaining 0It’s a tie – now for the Super overWickets in hand 4Run rate at start 9.70Required run rate 0.00Required score 194Gap between balls and runs at start -74Gap between current balls and runs -1

Table 28

Note: Because of the speed of a Super over and less than 2% of T20 games end with a Super over. This App has no functionality for a Super over.

Team Two



Tied game

Second innings overs set to 20

Illustration 52

Team Two



Tied game





Table 29



Table 30


Team Two



Tied game

Illustration 53

Team Two



Tied game

Continue to enter the score every 5 overs up until the end of over 20.






Table 31


Illustration 54

Team Two


Second innings graphs Tied game



Last Game


IMPORTANT: Do not enter any scores into the Scores Tab First innings combo boxes and then click or tap on the calculate button. This will over write all score entries and the Last Game will be lost.

1. If for any reason it is required to close the App and then resume using the App at later time.

2. The App has the built in functionality to reload the scores from the Last Game.

3. If Last Game is to be reloaded click on or tap the Last Game button refer to Illustration 56 below.

4. The App will be disabled while message box 9 appears so no score can be entered or another button clicked on or tapped.

5. Click on or tap the OK button to reload the Last Game and enable the App.

6. The scores will be entered into all the combo boxes for the following Tabs.

1) Scores Tab2) First Tab3) Second Tab4) Comparison Tab

7. As each Tab is clicked on or taped on the Tabs are automatically calculated there is no need to click on or tap the calculate button refer to Illustrations 56 below.

Scores Tab First innings combo boxes with no scores entered

Illustration 56

Last Game


IMPORTANT: Do not enter any scores into the Scores Tab First innings combo boxes and then click or tap on the calculate button. This will over write all score entries and the Last Game will be lost.

Illustration 57

Illustration 58

Illustrations 57 and 58 are two examples of Last Game being used at two different stages of a game.

Revised target and overs


First innings delays

T20 games can have their allotted overs reduced as a result of time delays, for example interrupted by rain, power fail to lights etc. A minimum of five overs per team constitutes a game.

This user’s guide covers three events that can result in overs being reduced in the First innings of a T20 game. One, two or all three of these events may occur in the First innings they are as follows.

1. A time delay before the game starts with no further delays once the game has started.

2. A time delay after the First innings has started with no further delays once the game has recommenced.

3. A time delay after at least five overs are completed and the time delay is significant in duration so the First innings is Abounded.

Recommendation: When using The App for the first five times only use it in conjunction with T20 games where there is no time delay for ease of use.


First innings delays of 110 Harrison Cricket Apps © T20 Users Guide

Scores Tab Event 1

A time delay before the game starts with no further delays once the game has started.

For this example a time delay sufficient to cause the loss of 10 overs for the entire game will be used. Therefore Team One and Team Two will have their allotted overs reduced to 15 overs each at the start of the game. To set Allotted overs to 15 for Team One and Team Two do the following.

1. Click on or tap the Allotted overs combo box and scroll up to 15 overs.

2. Click on or tap the Calculate button to reset the App.

3. With allotted overs set to 15 and no further time delays the Scores Tab requires no further adjustment for the duration of the First Innings.

4. Any attempt to set First innings overs greater than the Allotted overs will result in the First innings overs being reset to the same amount as the Allotted overs automatically. This applies to the First Tab and the Comparison tab as well refer to Illustration 59 below.

Illustration 59 Allotted overs set to 15


First innings delays of 110 Harrison Cricket Apps © T20 Users Guide

First Tab Event 1

With a reduction of the Allotted overs to 15 the Powerplay overs will need to be readjusted refer to Table 31.

5-8 29-11 312-14 415-18 519-20 6

. Table 31

To readjust Powerplay overs

1. Click on or Tap the Powerplay overs combo box.

2. As the Powerplay overs combo box is set to 6 by default scroll back to 5 refer to Illustration 60 below.

3. If no more time delays occur the First Tab requires no more adjustment.

Illustration 60 below Powerplay overs combo box is set to 5



Comparison Tab Event 1

With no further time delays the Comparison Tab requires no adjustment.

Using the App Event 1

With the Scores and First Tabs adjusted return to Team One’s section of the user’s guide on page 21.




Scores Tab Event 2

A time delay after the First innings has started with no further delays once the game has recommenced.

For this example a time delay sufficient to cause the loss of 10 overs for the entire game will be used. Therefore Team One and Team Two will have their allotted overs reduced to 15 overs each once the game has recommenced. To set overs to 15 for Team One and Team Two do the following.

1. Click on or tap the Allotted overs combo box and scroll up to 15 overs.


3. With allotted overs set to 15 and no further time delays the Scores Tab requires no further adjustment for the duration of the First Innings.

4. Any attempt to set First innings overs greater than the Allotted overs will result in the First innings overs being reset to the same amount as the Allotted overs automatically. This applies to the First Tab and the Comparison tab as well refer to Illustration 61 below.

Illustration 61 Allotted overs set to 15




First Tab Event 2

With a reduction of the Allotted overs to 15 the Powerplay overs will need to be readjusted refer to Table 32.

5-8 29-11 312-14 415-18 519-20 6

. Table 32




3. If no more time delays occur the First Tab requires no more adjustment.

Illustration 62 Powerplay overs combo box is set to 5






With the Scores and First Tabs adjusted return to Team One’s section of the user’s guide on page 21.




Scores Tab Event 3

A time delay after at least five overs are completed and the time delay is significant in duration so the First innings is Abounded.

For this example a time delay starting at 15 overs 3 balls and continuing in duration to cause the First innings to be Abounded.

Illustration 63 below displays the First Innings score at 15 overs 3 balls before the time delay. To readjust the App refer to page 91.

Illustration 63




Scores Tab Event 3

To readjust the App do the following.

1. Click on or tap the First innings combo box and scroll down to display Abounded.


3. With the First innings Abounded Team Two’s Second innings combo boxes will now be visible.

4. To set Team Two’s Revised target and overs go to the Setting Revised target and overs section of this user’s guide page 95 refer to Illustration 64 below.

Illustration 64 First innings box set to Abounded




First Tab Event 3

With the First innings Abounded at 15 overs 3 balls.

1. No score entries will be allowed in the Runs and Wickets combo boxes for the last 4 overs contained within the Twenty overs group box. This applies to both the First and Second tabs.

2. The Overs combo box will automatically be set to the end of the over which in this case will be 16 overs refer to Illustration 65 below.

3. Because the first innings has been Abounded the Powerplay overs combo box does not require adjustment.

Overs combo box set to 16 No score entries in the last 4 overs

Illustration 65 Powerplay overs combo box




With the First innings Abounded. The Second Tab and Team Two’s Second innings combo boxes will now be visible refer to Illustration 66 below.


Illustration 66





With the First innings Abounded at 15 overs 3 balls.

1. The Overs combo box within the Twenty overs group box will not be allowed to exceed 16 overs refer to Illustration 67 below.

2. With the First innings Abounded. Team Two’s Second innings combo boxes will now be visible refer to Illustration 67 below.

Overs set to 16

Illustration 67 below



Second innings

Setting Revised target and overs

When the game recommences after the time delay the commentary team for the broadcaster will inform viewers of the Revised target and overs. There are numerous web sites with this information.

For this example Revised target will be set at 105 runs and overs will be set at 12 to readjust the App do the following.

1. Click on or tap the Target combo box and scroll down to 105.



4. With the Revised target and overs entered and calculated Team Two’s run chase information will be displayed refer to Illustration 68 below.

5. With the Scores Tab readjusted go to Team Two’s section of the user’s guide on page 48.

Illustration 68 Target combo box set to 105 Overs combo box set to 12



Second innings delays


This user’s guide covers three events that can result in overs being reduced in the Second innings of a T20 game. One, two or all three of these events may occur in the Second innings they are as follows.

1. A time delay before the Second innings starts with no further delays once the Second innings has started.

2. A time delay after the Second innings has started with no further delays once the Second innings has recommenced.

3. A time delay after at least five overs are completed and the time delay is significant in duration so the Second innings is Abounded.

Recommendation: When using The App for the first five times only use it in conjunction with T20 games where there is no time delay for ease of use.


Second innings delays of 110 Harrison Cricket Apps © T20 Users Guide

Scores Tab Event 1

A time delay before the Second innings starts with no further delays once the Second innings has started.

Note: Do not readjust Allotted overs within the Game settings group box.

For this example a time delay sufficient to cause the loss of 5 overs for the Second innings will be used.





3. Click on or tap the Calculate button to reset the App refer to Illustration 69 below.

Allotted overs do not readjust



Second innings delays of 110 Harrison Cricket Apps © T20 Users Guide

Second Tab Event 1

With Revised overs set to 15 the Powerplay overs will need to be readjusted refer to Table 33.

5-8 29-11 312-14 415-18 519-20 6

. Table 33




3. If no more time delays occur the Second Tab requires no more adjustment.







With the Scores Tab adjusted return to Team Two’s section of the user’s guide on page 48.




Scores Tab Event 2

A time delay after the Second innings has started with no further delays once the Second innings has recommenced.


For this example a time delay sufficient to cause the loss of 5 overs for the Second innings will be used.





3. Click on or tap the Calculate button to reset the App refer to Illustration 71 below.

Allotted overs do not readjust





Second Tab Event 2

With Revised overs set to 15 the Powerplay overs will need to be readjusted refer to Table 33.

5-8 29-11 312-14 415-18 519-20 6

. Table 33




3. If no more time delays occur the Second Tab requires no more adjustment.




With no further time delays the Comparison Tab requires no adjustment. of 110 Harrison Cricket Apps © T20 Users Guide


With the Scores Tab adjusted return to Team Two’s section of the user’s guide on page 48.




Scores Tab Event 3

A time delay after at least five overs are completed and the time delay is significant in duration so the Match is Abounded.


When the Match is Abounded the commentary team for the broadcaster will inform viewers of the Revised target and overs. There are numerous web sites with this information.




3. Click on or tap the Second innings combo box and scroll down to display Abounded


5. With the Second innings Abounded the Second innings Overs combo box will automatically bet set to the same amount of overs as the Revised overs combo box refer to Illustration 73 below.

Allotted overs do not readjust Second innings Overs combo box





Second Tab Event 3

1. With the Second innings Abounded the Second Tab overs combo box will automatically bet set to the same amount of overs as the Revised overs combo box.

2. Update the 8th over Runs and Wickets combo boxes if not already done.

3. No score entries will be permitted from overs 9 to 20 they will be automatically cleared when the calculate button is clicked on or tapped.

4. Because the second innings has been Abounded the Powerplay overs combo box does not require adjustment refer to Illustration 74 below.

Second Tab Overs combo box

Illustration 74





With the Second innings Abounded the Comparison Tab Ten overs group box overs combo box will not be allowed to be greater than the amount of overs as the Revised overs combo box when the calculate button is clicked on or tapped refer to Illustration 75 below.

Ten overs group box

Illustration 75 Overs combo box

Trouble shooting

Full Allotted overs


Enter Team Tab

Problem Causes Reference pagesTeam One’s name is not displayed in the preview area after the update button is clicked on or tapped

Team One’s back colour and fore colour have not been set and updated

8,9 & 10

Team Two’s name is not displayed in the preview area after the update button is clicked on or tapped

Team Two’s back colour and fore colour have not been set and updated

12

Scores Tab

Problem Causes Reference pagesScores Tab will not display Team One and or Team

Two names, back colour and fore colour have not been set and updated

Team One 8,9 &10Team Two 12

Information will not display after calculate button is clicked on or tapped

Scores Tab First innings overs are still set to zero

25 & 26

Team Two’s Run chase information will not display at the end of Team One’s innings

First innings overs not set to 20

If Team One is bowled out wickets not set to 10

36 & 37

42 & 43

First Tab

Problem Causes Reference pagesFirst Tab will not display Scores Tab First innings

overs are still set to zero25 & 26


First Tab First inningsOvers are still set to zero

27

Trouble shooting

Full Allotted overs


Second Tab

Problem Causes Reference pagesSecond Tab will not display First Tab overs not set to 20


38 & 39

44 & 45


Second Tab First inningsOvers are still set to zero

48

Comparison Tab

Problem Causes Reference pagesComparison Tab will not display

Scores Tab First innings overs are still set to zero

25 & 26

First innings information will not display after calculate button is clicked on or tapped

Comparison Tab First innings Five overs group box overs still set to zero

32 & 33

Second innings group boxes will no display

Comparison Tab First innings Twenty overs group box overs not set to 20


40 & 41

46 & 47

Second innings information will not display after calculate button is clicked on or tapped

Overs are still set to zero 48

Trouble shooting

Graphs


Problem Causes Reference pagesManhattan will not display First Tab overs are still set

to zero27

Manhattan Second innings graph will not display

First Tab overs not set to 20


Second Tab overs are still set to zero

38 & 39

44 & 45

48

Innings will not display First Tab overs are still set to zero

27

Innings Second innings graph will not display




38 & 39

44 & 45

48

Run Rate will not display First Tab overs are still set to zero

27

Run Rate Second innings graph will not display




38 & 39

44 & 45

48

Bar Graph will not display Comparison Tab First innings Five overs group box overs still set to zero

32 & 33

Bar Graph Second innings graph will not display

Comparison Tab First innings Twenty overs group box overs not set to 20


40 & 41

46 & 47

Trouble shooting

Revised target and overs First innings



This user’s guide covers three events that can result in overs being reduced in the First innings of a T20 game. One, two or all three of these events may occur in the First innings they are as follows.

1. A time delay before the game starts with no further delays once the game has started.

2. A time delay after the First innings has started with no further delays once the game has recommenced.

3. A time delay after at least five overs are completed and the time delay is significant in duration so the First innings is Abounded.

Scores Tab Event 1

Problem Causes Reference pagesNot displaying correct information

Allotted overs not readjusted 84

Second innings Run chase information will not display at end First innings

Allotted overs not readjusted

First innings overs not equal to readjusted Allotted overs

84

84

Scores Tab Event 2


Allotted overs not readjusted 87


Allotted overs not readjusted

First innings overs not equal to readjusted Allotted overs

87

87

Scores Tab Event 3

Problem Causes Reference pagesSecond innings combo boxes will not display after First innings Abounded

First innings Abounded combo box not set to Abounded and the Calculate button clicked on or tapped

91


Revised target and overs not set and the Calculate button clicked on or tapped

95

Trouble shooting

Revised target and overs Second innings


T20 games can have their allotted overs reduced as a result of time delays, for example interrupted by rain, power fail to lights etc. A minimum of five overs per team constitutes a game

This user’s guide covers three events that can result in overs being reduced in the Second innings of a T20 game. One, two or all three of these events may occur in the Second innings they are as follows.

1. A time delay before the Second innings starts with no further delays once the Second innings has started.

2. A time delay after the Second innings has started with no further delays once the Second innings has recommenced.

3. A time delay after at least five overs are completed and the time delay is significant in duration so the Second innings is Abounded.

Scores Tab Event 1



95 & 97

Scores Tab Event 2



100

Scores Tab Event 3



103

Note: If the above problems are solved correctly there should not be any problems in the Second Tab and Comparison Tab.


opening the app · web viewharrison cricket apps t20 users guide table of contents opening the app6...

Documents