3. Locate the heater control panel and PRESS the "UP" or "Down" bu�on for 5 seconds, the wifi light (blue) should start blinking. See image:

OPERATIONS & CONTROLS

Power Bu�on

Celsius & Fahrenheit

Temperature control arrows

CONTROLPANEL

CONTROLPANEL

CONNECT THE WIFI

1. Download the “Smart Life” App (see icon)Register new account and follow in-app prompts.Check text or email for verifica�on (could be in spam inbox)

2. Plug in heater and make sure the power is off. The power symbol should be blue at this status.

MODEL#HS-1000-WXHS-1000-WA

MODEL# HS-1500-PHXCelsius & Fahrenheit

Power Bu�on

Temperature control arrows

Smart Life

7. Enter your wifi password, tap confirm and wait for your device to link. When the heater sucessfully connects to internet, the wifi icon light turns from blinking to always on.

6. Verify WiFi symbol is blinking on the display panel of your heater.

Tap “confirm indicator rapidly blink” icon at the bo�om of your screen.

4. Open your Smart Home app and tap on the “ADD DEVICE” bu�on to add your new Heatstorm heater.

LOCATE THE UP OR DOWN ARROW. PRESS & HOLD FOR 5 SECONDS

WIFI SYMBOL SHOULD START BLINKING

5. Select ‘Heater’ op�on and double check to make sure your cell phone or tablet is connected to the same WiFi as the heater will be before con�nuing.

12:30 PM

**FOR INITIAL SET-UP, MAKE SURE YOUR PHONE OR TABLET IS CONNECTED TO YOUR WIFI BEFORE CONTINUING

12:35 PM

see “opera�ons and controls” page for loca�ng arrows on other models

Please note that the "up" and "down" buttons will not be lit up but will still have an audible “click” when pressed .

CONTROLPANEL

WiFi

Wifi

The status of the wifi icon light are:

Off: Disconnected from WiFiBlinking: wai�ng for connec�onOn: connected to WiFi

HS-1500-ISM

If you need to change WiFi networks press "up' or "down" bu�on for 5 seconds. The heater will reset wifi configura�on and will allow you to follow the connec�on process again. You can reset or connect the heater to a different WiFi connec�on by doing this opera�on.