opti-flo balanced hot runner systems · opti-flo® balanced hot runner systems opti-flo ® systems...
TRANSCRIPT
Opti-Flo® BalancedHot Runner Systems
Opti-Flo® systems with patented MeltFlipper® technology from Beaumont Technologies Inc.
delivers unmatched Cavity-to-Cavity consistency and productivity advantages. Only from INCOE®
That's INCOE® Hot Runner performance.
I Advanced Manifold Technology
I True Rheological Balance
I Superior Part Performance
I Reduced Cycle Times
INCOE® Corporation
1740 East Maple Road Troy, Michigan 48083 USA T: +1 (248) 616-0220F: +1 (248) 616-0225E: [email protected]
North America | Europe | Asia | South America
INCOE® Hot Runners Today
Technology
with
TechnologyNEW
INCOE® Opti-Flo® and Beaumont Technologies Inc. expertise save Time and Money for Omni Mold Ltd. on 48 cavity medical part mold
INCOE Global Sales, Service & Support
1740 East Maple RoadTroy, MI 48083 USAT: +1 (248) 616-0220F: +1 (248) 616-0225 E: [email protected]
BEAUMONT Sales, Service & Support
1524 East 10th Street Erie, PA 16511 USAT: +1 (814) 899-6390F: +1 (814) 899-7117 E: [email protected] www.beaumontinc.com
TESTIMONIAL
For more information contact:
James Lew Omni Mold Ltd. [email protected]
David Hoffman Technical Sales & Marketing Manager Beaumont Technologies [email protected]
INCOE® [email protected]
manifold, and also provided RCS cold runner MeltFlipper® technology. CAE mold filling simulation service to control the flow within the cold runner system and part cavities was also part of the solution. Upon first sampling of the new mold, the benefits were immediately realized as the system started up without any mold filling problems. INCOE® was able to save Omni Mold rework and qualification costs that would have otherwise likely been incurred due to the inherent imbalanced cavity to cavity layout. The difficult mold layout was required by the post molding processes. "We certainly have learned a great deal working with Beaumont and INCOE®, and plan on using them for future projects when it is applicable."
Since 2003, INCOE® has provided hot runner manifold designs with the Beaumount Technologies Inc. patented MeltFlipper® balanced manifold technology exclusively under license to INCOE® Corporation for use in their Opti-Flo® hot runner systems. From an article published in SPE Injection Molding Division August 2010
INCOE® Corporation (Troy, MI, USA), provides an example of how its long term collaboration with Beaumont Technologies, Inc. continues to pay off for mold makers and processors. This recent application involved a 48-cavity hot to cold runner system producing medical device parts. Due to confidentiality agreements in place, the end-user and details regarding the part are not available, however moldmaker Omni Mold Ltd. shares their experience regarding this application.
James Lew, Omni Mold Ltd. stated, "We needed to build a 48-cavity hot-to-cold runner system to produce a tight tolerance medical device molded component. The high cavitations and the complexity of the mold prompted Omni Mold's engineers to contact Beaumont Technologies, Inc. to provide mold filling and balancing solutions.
As part of the solutions proposed, Beaumont Technologies Inc. recommended INCOE®'s Opti-Flo® hot runner system to control the material flow inside of the
For more information visit www.incoe.com/optiflo
“Upon first sampling of the new mold, the benefits were immediately realized as the
system started up without any mold filling problems.”
Technology
with