oracle® database gateway for odbcvii preface this manual describes the oracle database gateway for...

Oracle® Database Gateway for ODBCUser’s Guide

11g Release 2 (11.2)

E12070-03

January 2012

Oracle Database Gateway for ODBC User's Guide, 11g Release 2 (11.2)

E12070-03

Copyright © 2007, 2012, Oracle and/or its affiliates. All rights reserved.

Primary Author: Maitreyee Chaliha

Contributor: Vira Goorah, Juan Pablo Ahues-Vasquez, Peter Castro, Charles Benet, Peter Wong, and Govind Lakkoju

This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited.

The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing.

If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, the following notice is applicable:

U.S. GOVERNMENT RIGHTS Programs, software, databases, and related documentation and technical data delivered to U.S. Government customers are "commercial computer software" or "commercial technical data" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, the use, duplication, disclosure, modification, and adaptation shall be subject to the restrictions and license terms set forth in the applicable Government contract, and, to the extent applicable by the terms of the Government contract, the additional rights set forth in FAR 52.227-19, Commercial Computer Software License (December 2007). Oracle America, Inc., 500 Oracle Parkway, Redwood City, CA 94065.

This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications that may create a risk of personal injury. If you use this software or hardware in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure its safe use. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software or hardware in dangerous applications.

Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.

Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International, Inc. AMD, Opteron, the AMD logo, and the AMD Opteron logo are trademarks or registered trademarks of Advanced Micro Devices. UNIX is a registered trademark of The Open Group.

This software or hardware and documentation may provide access to or information on content, products, and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services.

iii

Contents

List of Tables

Preface ................................................................................................................................................................ vii

Audience...................................................................................................................................................... viiDocumentation Accessibility .................................................................................................................... viiRelated Documents ................................................................................................................................... viiiConventions ............................................................................................................................................... viii

1 Introduction

Overview .................................................................................................................................................... 1-1Heterogeneous Services Technology .................................................................................................... 1-2Oracle Database Gateway for ODBC ................................................................................................... 1-2Oracle Database Gateway for ODBC Architecture............................................................................ 1-2

Oracle and Non-Oracle Systems on Separate Machines .............................................................. 1-3Oracle and Non-Oracle Systems on the Same Machine ............................................................... 1-4

ODBC Connectivity Requirements ...................................................................................................... 1-5

2 Oracle Database Gateway for ODBC Features and Restrictions

Using the Pass-Through Feature ........................................................................................................... 2-1AUTO COMMIT ...................................................................................................................................... 2-2Known Restrictions ................................................................................................................................. 2-2

COMMIT or ROLLBACK in PL/SQL Cursor Loops Closes Open Cursors.............................. 2-2SQL Syntax .......................................................................................................................................... 2-3

WHERE CURRENT OF Clause................................................................................................. 2-3CONNECT BY Clause ................................................................................................................ 2-3ROWID ......................................................................................................................................... 2-3EXPLAIN PLAN Statement....................................................................................................... 2-3

Does not support CALLBACK links ............................................................................................... 2-3Known Problems ...................................................................................................................................... 2-3

Encrypted Format Login .................................................................................................................. 2-4Date Arithmetic .................................................................................................................................. 2-4

A Data Type Conversion

Mapping ODBC Data Types to Oracle Data Types .......................................................................... A-1

iv

B Supported SQL Syntax and Functions

Supported SQL Statements ................................................................................................................... B-1DELETE .............................................................................................................................................. B-1INSERT ............................................................................................................................................... B-1SELECT............................................................................................................................................... B-2UPDATE ............................................................................................................................................. B-2

Oracle Functions ...................................................................................................................................... B-2

C Data Dictionary

Accessing the Non-Oracle Data Dictionary ....................................................................................... C-1Views and Tables Supported by Oracle Database Gateway for ODBC ....................................... C-1

Data Dictionary Mapping ................................................................................................................ C-2Oracle Database Gateway for ODBC Data Dictionary Descriptions......................................... C-3

D Initialization Parameters

Initialization Parameter File Syntax .................................................................................................... D-1Oracle Database Gateway for ODBC Initialization Parameters .................................................... D-2Initialization Parameter Description ................................................................................................... D-3

HS_DB_DOMAIN ............................................................................................................................ D-3HS_DB_INTERNAL_NAME .......................................................................................................... D-3HS_DB_NAME ................................................................................................................................. D-4HS_DESCRIBE_CACHE_HWM .................................................................................................... D-4HS_LANGUAGE ............................................................................................................................. D-4

Character Sets ............................................................................................................................. D-4Language..................................................................................................................................... D-5Territory ...................................................................................................................................... D-5

HS_LONG_PIECE_TRANSFER_SIZE ......................................................................................... D-5HS_OPEN_CURSORS .................................................................................................................... D-5HS_RPC_FETCH_REBLOCKING ................................................................................................ D-6HS_RPC_FETCH_SIZE .................................................................................................................. D-6HS_TIME_ZONE .............................................................................................................................. D-7HS_TRANSACTION_MODEL ....................................................................................................... D-7IFILE ................................................................................................................................................... D-8HS_FDS_CONNECT_INFO ............................................................................................................ D-8HS_FDS_DEFAULT_OWNER ........................................................................................................ D-8HS_FDS_TRACE_LEVEL................................................................................................................. D-9HS_FDS_SHAREABLE_NAME ...................................................................................................... D-9HS_FDS_FETCH_ROWS.................................................................................................................. D-9HS_FDS_REMOTE_DB_CHARSET ............................................................................................. D-10HS_FDS_SQLLEN_INTERPRETATION ..................................................................................... D-10HS_FDS_REPORT_REAL_AS_DOUBLE .................................................................................... D-10

Index

v

List of Tables

A–1 Mapping ODBC Data Types to Oracle Data Types ............................................................. A-1C–1 Oracle Database Gateway for ODBC Data Dictionary Mapping....................................... C-2C–2 ALL_CATALOG ....................................................................................................................... C-3C–3 ALL_COL_COMMENTS ......................................................................................................... C-3C–4 ALL_CONS_COLUMNS ......................................................................................................... C-3C–5 ALL_CONSTRAINTS............................................................................................................... C-3C–6 ALL_IND_COLUMNS............................................................................................................. C-4C–7 ALL_INDEXES .......................................................................................................................... C-4C–8 ALL_OBJECTS........................................................................................................................... C-6C–9 ALL_TAB_COLUMNS............................................................................................................. C-6C–10 ALL_TAB_COMMENTS.......................................................................................................... C-7C–11 ALL_TABLES ............................................................................................................................ C-7C–12 ALL_USERS ............................................................................................................................... C-8C–13 ALL_VIEWS............................................................................................................................... C-9C–14 DICTIONARY ........................................................................................................................... C-9C–15 DICT_COLUMNS..................................................................................................................... C-9C–16 USER_CATALOG..................................................................................................................... C-9C–17 USER_COL_COMMENTS....................................................................................................... C-9C–18 USER_CONS_COLUMNS..................................................................................................... C-10C–19 USER_CONSTRAINTS .......................................................................................................... C-10C–20 USER_IND_COLUMNS......................................................................................................... C-10C–21 USER_INDEXES...................................................................................................................... C-11C–22 USER_OBJECTS ...................................................................................................................... C-12C–23 USER_TABCOLUMNS .......................................................................................................... C-12C–24 USER_TAB_COMMENTS ..................................................................................................... C-13C–25 USER_TABLES ........................................................................................................................ C-13C–26 USER_USERS........................................................................................................................... C-15C–27 USER_VIEWS .......................................................................................................................... C-15

vii

Preface

This manual describes the Oracle Database Gateway for ODBC, which enables Oracle client applications to access non-Oracle systems data through Structured Query Language (SQL). The gateway, with the Oracle database, creates the appearance that all data resides on a local Oracle database, even though the data can be widely distributed.

This preface covers the following topics:

■ Audience

■ Documentation Accessibility

■ Related Documents

■ Conventions

AudienceThis manual is intended for Oracle database administrators who perform the following tasks:

■ Installing and configuring the Oracle Database Gateway for ODBC

■ Diagnosing gateway errors

■ Using the gateway to access non-Oracle system data

Documentation AccessibilityFor information about Oracle's commitment to accessibility, visit the Oracle Accessibility Program website at http://www.oracle.com/pls/topic/lookup?ctx=acc&id=docacc.

Access to Oracle SupportOracle customers have access to electronic support through My Oracle Support. For information, visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=info or visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=trs if you are hearing impaired.

Note: You should understand the fundamentals of Oracle Database Gateways and the UNIX based platform before using this guide to install or administer the gateway.

viii

Related DocumentsFor more information, see the following documents:

■ Oracle Database New Features Guide

■ Oracle Call Interface Programmer's Guide

■ Oracle Database Administrator's Guide

■ Oracle Database Advanced Application Developer's Guide

■ Oracle Database Concepts

■ Oracle Database Performance Tuning Guide

■ Oracle Database Error Messages

■ Oracle Database Globalization Support Guide

■ Oracle Database Reference

■ Oracle Database SQL Language Reference

■ Oracle Database Net Services Administrator's Guide

■ SQL*Plus User's Guide and Reference

■ Oracle Database Heterogeneous Connectivity User's Guide

■ Oracle Database Security Guide

Many of the examples in this book use the sample schemas of the seed database, which is installed by default when you install Oracle. Refer to Oracle Database Sample Schemas for information on how these schemas were created and how you can use them yourself.

ConventionsThe following text conventions are used in this document:

Convention Meaning

boldface Boldface type indicates graphical user interface elements associated with an action, or terms defined in text or the glossary.

italic Italic type indicates book titles, emphasis, or placeholder variables for which you supply particular values.

monospace Monospace type indicates commands within a paragraph, URLs, code in examples, text that appears on the screen, or text that you enter.

Introduction 1-1

1Introduction

This chapter introduces the challenge faced by organizations when running several different database systems. It briefly covers Heterogeneous Services, the technology that the Oracle Database Gateway for ODBC is based on.

To get a good understanding of generic gateway technology, Heterogeneous Services, and how Oracle Database Gateways fit in the picture, reading the Oracle Database Heterogeneous Connectivity User's Guide first is highly recommended.

This chapter contains the following sections:

■ Overview

■ Heterogeneous Services Technology

■ Oracle Database Gateway for ODBC

■ Oracle Database Gateway for ODBC Architecture

■ ODBC Connectivity Requirements

OverviewHeterogeneous data access is a problem that affects a lot of companies. A lot of companies run several different database systems. Each of these systems stores data and has a set of applications that run against it. Consolidation of this data in one database system is often hard - in large part because many of the applications that run against one database may not have an equivalent that runs against another. Until such time as migration to one consolidated database system is made feasible, it is necessary for the various heterogeneous database systems to interoperate.

Oracle Database Gateways provide the ability to transparently access data residing in a non-Oracle system from an Oracle environment. This transparency eliminates the need for application developers to customize their applications to access data from different non-Oracle systems, thus decreasing development efforts and increasing the mobility of the application. Applications can be developed using a consistent Oracle interface for both Oracle and non-Oracle systems.

Gateway technology is composed of two parts: a component that has the generic technology to connect to a non-Oracle system, which is common to all the non-Oracle systems, called Heterogeneous Services, and a component that is specific to the non-Oracle system that the gateway connects to. Heterogeneous Services, in conjunction with the Oracle Database Gateways, enable transparent access to non-Oracle systems from an Oracle environment.

Heterogeneous Services Technology

1-2 Oracle Database Gateway for ODBC User's Guide

Heterogeneous Services TechnologyHeterogeneous Services provides the generic technology for connecting to non-Oracle systems. As an integrated component of the database, Heterogeneous Services can exploit features of the database, such as the powerful SQL parsing and distributed optimization capabilities.

Heterogeneous Services extend the Oracle SQL engine to recognize the SQL and procedural capabilities of the remote non-Oracle system and the mappings required to obtain necessary data dictionary information. Heterogeneous Services provides two types of translations: the ability to translate Oracle SQL into the proper dialect of the non-Oracle system as well as data dictionary translations that displays the metadata of the non-Oracle system in the local format. For situations where no translations are available, native SQL can be issued to the non-Oracle system using the pass-through feature of Heterogeneous Services.

Heterogeneous Services also maintains the transaction coordination between Oracle and the remote non-Oracle system.

Oracle Database Gateway for ODBCOracle Database Gateway for ODBC is intended for low-end data integration solutions requiring the dynamic query capability to connect from an Oracle database to non-Oracle systems. Any data source compatible with the ODBC standards described in this chapter can be accessed using Oracle Database Gateway for ODBC.

The capabilities, SQL mappings, data type conversions, and interface to the remote non-Oracle system are contained in the gateway. The gateway interacts with Heterogeneous Services to provide the transparent connectivity between Oracle and non-Oracle systems.

Oracle Database Gateway for ODBC ArchitectureTo access the non-Oracle data store using Oracle Database Gateway for ODBC, the gateway works with an ODBC driver. The driver that you use must be on the same machine as the gateway. The non-Oracle system can reside on the same machine as the Oracle database or on a different machine.

The gateway can be installed on the machine running the non-Oracle system, the machine running the Oracle database or on a third machine as a standalone. Each configuration has its advantages and disadvantages. The issues to consider when determining where to install the gateway are network traffic, operating system platform availability, hardware resources and storage.

See Also: Oracle Database Heterogeneous Connectivity User's Guide for more information about Heterogeneous Services.

Note: The ODBC driver may require non-Oracle client libraries even if the non-Oracle database is located on the same machine. Refer to your ODBC driver documentation for information about the requirements for the ODBC driver.

Oracle Database Gateway for ODBC Architecture

Introduction 1-3

Oracle and Non-Oracle Systems on Separate MachinesFigure 1–1 shows an example of a configuration in which an Oracle and non-Oracle database are on separate machines, communicating through Oracle Database Gateway for ODBC. The client connects to the non-Oracle system through a network.

Figure 1–1 Oracle and Non-Oracle Systems on Separate Machines

In this configuration:

1. A client connects to the Oracle database through Oracle Net.

2. The Heterogeneous Services component of the Oracle database connects through Oracle Net to the gateway.

3. The gateway communicates with the following non-Oracle components:

■ An ODBC driver manager

■ An ODBC driver

4. Each user session receives its own dedicated agent process spawned by the first use in that user session of the database link to the non-Oracle system. The agent process ends when the user session ends.


Non-Oraclesystem

Network

Machine 2

Client

OracleNet

Machine 1

Non-Oraclecomponent

OracleDatabase

ODBCdriver manager

ODBC driver

Non-Oraclesystemclient

HS

OracleNet

OracleDatabase

Gateway forODBC

Oracle Database Gateway for ODBC Architecture


Oracle and Non-Oracle Systems on the Same MachineFigure 1–2 shows an example of a configuration in which an Oracle and non-Oracle database are on the same machine, again communicating through Oracle Database Gateway for ODBC.

Figure 1–2 Oracle and Non-Oracle Systems on the Same Machine

In this configuration:

1. A client connects to the Oracle database through Oracle Net.

2. The Heterogeneous Services component of the Oracle database connects through Oracle Net to the gateway

3. The agent communicates with the following non-Oracle components:

■ An ODBC driver manager

■ An ODBC driver

The driver then allows access to the non-Oracle data store.

4. Each user session receives its own dedicated agent process spawned by the first use in that user session of the database link to the non-Oracle system. The agent process ends when the user session ends.

Client

OracleNet

OracleNet

Machine 1

Non-Oraclecomponent

OracleDatabase

Non-Oraclesystem

HS

ODBC drivermanager

ODBC driver

Non-Oraclesystemclient

OracleDatabase

Gateway forODBC

ODBC Connectivity Requirements

Introduction 1-5

ODBC Connectivity RequirementsTo use Oracle Database Gateway for ODBC, you must have an ODBC driver installed on the same machine as the gateway. The ODBC driver manager and driver must meet the following requirements:

■ The following ODBC catalog functions must work inside a transaction:

– SQLColumns

– SQLForeignKeys

– SQLGetFunctions

– SQLGetInfo

– SQLGetTypeInfo

– SQLPrimaryKeys

– SQLProcedureColumns

– SQLProcedures

– SQLStatistics

– SQLTables

■ On Windows:

■ The ODBC driver must have compliance level to ODBC standard 3.0. For multi-byte support, the driver needs to meet ODBC standard 3.5.

■ The ODBC driver and driver manager must conform to ODBC application program interface (API) conformance Level 1 or higher. If the ODBC driver or driver manager does not support multiple active ODBC cursors, the complexity of SQL statements that you can execute using Oracle Database Gateway for ODBC is restricted.

■ On UNIX:

■ The ODBC driver manager must be installed on the same machine.

■ The ODBC driver must have compliance level to ODBC Standard 3.0 and have a conformance level 1 or higher. If the ODBC driver works with an ODBC driver manager, the ODBC driver manager must be compliant with ODBC Standard 3.0 or higher. The ODBC driver must have compliance level to ODBC standard 3.0. For multi-byte support, the driver needs to meet ODBC standard 3.5.

■ The ODBC driver you use must support all of the core SQL ODBC data types and must support SQL grammar level SQL_92. The ODBC driver should also expose the following ODBC APIs:


See Also: Your ODBC driver documentation for dependencies on an ODBC driver manager, and Oracle Database Concepts for more information on transaction isolation levels.



– SQLAllocHandle

– SQLBindCol

– SQLBindParameter

– SQLCancel

– SQLColAttribute

– SQLColumns

– SQLConnect

– SQLDescribeCol

– SQLDisconnect

– SQLDriverConnect

– SQLEndTran

– SQLExecDirect

– SQLExecute

– SQLFetch

– SQLForeignKeys

– SQLFreeHandle

– SQLFreeStmt

– SQLGetConnectAttr

– SQLGetData

– SQLGetDiagField

– SQLGetDiagRec

– SQLGetEnvAttr

– SQLGetFunctions

– SQLGetInfo

– SQLGetStmtAttr

– SQLGetTypeInfo

– SQLMoreResults

– SQLNumResultCols

– SQLParamData

– SQLPrepare

– SQLPrimaryKeys

– SQLProcedureColumns

– SQLProcedures

– SQLPutData

– SQLRowCount

– SQLSetConnectAttr

– SQLSetEnvAttr


Introduction 1-7

– SQLSetDescField

– SQLSetDescRec

– SQLSetStmtAttr

– SQLStatistics - If statistics are to be supported

– SQLTables

Oracle Database Gateway for ODBC Features and Restrictions 2-1

2Oracle Database Gateway for ODBC Features

and Restrictions

After the gateway is installed and configured, you can use the gateway to access data in non-Oracle systems, pass native commands from applications to the non-Oracle system, perform distributed queries, and copy data.

This chapter contains the following sections:

■ Using the Pass-Through Feature

■ AUTO COMMIT

■ Known Restrictions

■ Known Problems

Using the Pass-Through FeatureThe gateway can pass native commands or statements from the application to the non-Oracle system using the DBMS_HS_PASSTHROUGH package.

Use the DBMS_HS_PASSTHROUGH package in a PL/SQL block to specify the statement to be passed to the non-Oracle system, as follows:

DECLARE num_rows INTEGER;BEGIN num_rows := DBMS_HS_PASSTHROUGH.EXECUTE_IMMEDIATE@SYBS('command');END;/

Where command cannot be one of the following:

■ BEGIN TRANSACTION

■ COMMIT

■ ROLLBACK

■ SAVE

■ SHUTDOWN

The DBMS_HS_PASSTHROUGH package supports passing bind values and executing SELECT statements.

Note: TRUNCATE cannot be used in a pass-through statement.

AUTO COMMIT


AUTO COMMITSome non-Oracle databases operate without logging. If read-only capability is desired under such environment, you need to set HS_TRANSACTION_MODEL=READ_ONLY_AUTOCOMMIT gateway parameter.

However, if you still need to have update capability, then set HS_TRANSACTION_MODEL=SINGLE_SITE_AUTOCOMMIT in the gateway initialization parameter file. Any update is committed immediately. Commit-confirm is not allowed for the targets operating without logging.

Known Restrictions If you encounter incompatibility problems not listed in this section or in "Known Problems" on page 2-3, contact Oracle Support Services. The following section describes the known restrictions:

■ BLOB and CLOB data cannot be read by pass-through queries

■ Updates or deletes that include unsupported functions within a WHERE clause are not allowed

■ Does not support stored procedures

■ Cannot participate in distributed transactions; they support single-site transactions only

■ Does not support multithreaded agents

■ Does not support updating LONG columns with bind variables

■ Does not support rowids

■ COMMIT or ROLLBACK in PL/SQL Cursor Loops Closes Open Cursors

■ SQL Syntax

■

COMMIT or ROLLBACK in PL/SQL Cursor Loops Closes Open CursorsAny COMMIT or ROLLBACK issued in a PL/SQL cursor loop closes all open cursors, which can result in the following error:

ORA-1002: fetch out of sequence

To prevent this error, move the COMMIT or ROLLBACK statement outside the cursor loop.

Note: As a general rule it is recommended that you COMMIT after each DDL statement in the pass-through especially when going to a Sybase database.

See Also: Oracle Database PL/SQL Packages and Types Reference and Chapter 3 of Oracle Database Heterogeneous Connectivity User's Guide for more information about the DBMS_HS_PASSTHROUGH package.

Known Problems

Oracle Database Gateway for ODBC Features and Restrictions 2-3

SQL SyntaxThis section lists restrictions on the following SQL syntax:

■ WHERE CURRENT OF Clause

■ CONNECT BY Clause

■ ROWID

■ EXPLAIN PLAN Statement

WHERE CURRENT OF ClauseUPDATE and DELETE statements with the WHERE CURRENT OF clause are not supported by the gateway because they rely on the Oracle ROWID implementation. To update or delete a specific row through the gateway, a condition style WHERE clause must be used.

CONNECT BY ClauseThe gateway does not support the CONNECT BY clause in a SELECT statement.

ROWIDThe Oracle ROWID implementation is not supported.

EXPLAIN PLAN StatementThe EXPLAIN PLAN statement is not supported.

■ SQL*Plus COPY Command with Lowercase Table Names

You need to use double quotes to wrap around lowercase table names.

For example:

copy from tkhouser/tkhouser@inst1 insert loc_tkhodept using select * from "tkhodept"@holink2;

■ Database Links

The gateway is not multithreaded and cannot support shared database links. Each gateway session spawns a separate gateway process and connections cannot be shared.

Does not support CALLBACK linksOracle Database Gateway for ODBC does not support CALLBACK links. Trying a CALLBACK link with the gateway will return the following error message:

ORA-02025: All tables in the SQL statement must be at the remote database

Known ProblemsThis section describes known problems and includes suggestions for correcting them when possible. If you have any questions or concerns about the problems, contact Oracle Support Services.

The following known problems are described in this section:

See Also: Appendix B, "Supported SQL Syntax and Functions" for more information about restrictions on SQL syntax.

Known Problems


■ Encrypted Format Login

■ Date Arithmetic

Encrypted Format Login Oracle database no longer supports the initialization parameter DBLINK_ENCRYPT_LOGIN. Up to version 7.3, this parameter's default TRUE value prevented the password for the login user ID from being sent over the network (in the clear). Later versions automatically encrypt the password.

Date ArithmeticThe following SQL expressions do not function correctly with the gateway:

date + numbernumber + datedate - numberdate1 - date2

Statements with the preceding expressions are sent to the non-Oracle system without any translation. If the non-Oracle system does not support these date arithmetic functions, then the statements return an error.

Data Type Conversion A-1

AData Type Conversion

Oracle maps ODBC data types to supported Oracle data types. When the results of a query are returned, Oracle converts the ODBC data types to Oracle data types.

The tables in this appendix show how Oracle maps ODBC data types to supported Oracle data types when it is retrieving data from a non-Oracle system.

This appendix contains the following table:

■ Table A–1, " Mapping ODBC Data Types to Oracle Data Types"

Mapping ODBC Data Types to Oracle Data TypesThe Oracle Database Gateway for ODBC maps the data types used in ODBC-compliant data sources to supported Oracle data types. When the results of a query are returned, the Oracle database converts the ODBC data types to Oracle data types. For example, the ODBC data type SQL_TYPE_TIMESTAMP is converted to Oracle's DATE data type.

If a table contains a column whose data type is not supported by Oracle Database Gateway for ODBC, the column information is not returned to the Oracle database.

Table A–1 maps ODBC data types into Oracle data types.

Table A–1 Mapping ODBC Data Types to Oracle Data Types

ODBC Oracle Comment

SQL_BIGINT NUMBER(19,0) -

SQL_BINARY RAW -

SQL_CHAR CHAR -

SQL_DECIMAL(p,s) NUMBER(p,s) -

SQL_DOUBLE FLOAT(53) -

SQL_FLOAT FLOAT(53) -

SQL_INTEGER NUMBER(10)

Note: It is possible under some circumstance for the INTEGER ANSI data type to map to Precision 38, but it usually maps to Precision 10.

-

SQL_INTERVAL_YEAR INTERVAL_YEAR_TO_MONTH -

SQL_INTERVAL_MONTH INTERVAL_YEAR_TO_MONTH -

Mapping ODBC Data Types to Oracle Data Types

A-2 Oracle Database Gateway for ODBC User's Guide

SQL_INTERVAL_YEAR_TO_MONTH

INTERVAL_YEAR_TO_MONTH -

SQL_INTERVAL_DAY INTERVAL_DAY_TO_SECOND -

SQL_INTERVAL_HOUR INTERVAL_DAY_TO_SECOND -

SQL_INTERVAL_MINUTE INTERVAL_DAY_TO_SECOND -

SQL_INTERVAL_SECOND INTERVAL_DAY_TO_SECOND -

SQL_INTERVAL_DAY_TO_HOUR

INTERVAL_DAY_TO_SECOND -

SQL_INTERVAL_DAY_TO_MINUTE


SQL_INTERVAL_DAY_TO_SECOND


SQL_INTERVAL_HOUR_TO_MINUTE


SQL_INTERVAL_HOUR_TO_SECOND


SQL_INTERVAL_MINUTE_TO_SECOND


SQL_LONGVARBINARY LONG RAW -

SQL_LONGVARCHAR LONG

Note: If an ANSI SQL implementation defines a large value for the maximum length of VARCHAR data, it is possible that ANSI VARCHAR will map to SQL_LONGVARCHAR and Oracle LONG.

-

SQL_NUMERIC(p[,s]) NUMBER(p[,s]) -

SQL_REAL FLOAT(24) -

SQL_SMALLINT NUMBER(5) -

SQL_TYPE_TIME CHAR(15) -

SQL_TINYINT NUMBER(3) -

SQL_TYPE_DATE DATE -

SQL_TYPE_TIMESTAMP DATE -

SQL_VARBINARY RAW -

SQL_VARCHAR VARCHAR2 -

SQL_WCHAR NCHAR -

SQL_WVARCHAR NVARCHAR -

SQL_WLONGVARCHAR LONG if Oracle DB Character Set = Unicode. Otherwise, it is not supported

SQL_BIT NUMBER(3) -

Table A–1 (Cont.) Mapping ODBC Data Types to Oracle Data Types

ODBC Oracle Comment

Supported SQL Syntax and Functions B-1

BSupported SQL Syntax and Functions

This appendix contains the following sections:

■ Supported SQL Statements

■ Oracle Functions

Supported SQL StatementsOracle Database Gateway for ODBC supports the following statements, but only if the ODBC driver and non-Oracle system can execute them and if the statements contain supported Oracle SQL functions:

■ DELETE

■ INSERT

■ SELECT

■ UPDATE

With a few exceptions, the gateway provides full support for Oracle DELETE, INSERT, SELECT, and UPDATE statements.

The gateway does not support Oracle data definition language (DDL) statements. No form of the Oracle ALTER, CREATE, DROP, GRANT, or TRUNCATE statements can be used. Instead, for ALTER, CREATE, DROP, and GRANT statements, use the pass-through feature of the gateway if you need to use DDL statements against the non-Oracle system database.

DELETEThe DELETE statement is fully supported. However, only Oracle functions supported by the non-Oracle system can be used.

INSERTThe INSERT statement is fully supported. However, only Oracle functions supported by the non-Oracle system can be used.

Note: TRUNCATE cannot be used in a pass-through statement.

See Also: Oracle Database SQL Language Reference for detailed descriptions of keywords, parameters, and options.

Oracle Functions

B-2 Oracle Database Gateway for ODBC User's Guide

SELECTThe SELECT statement is fully supported, with these exceptions:

■ CONNECT BY condition

■ NOWAIT

■ START WITH condition

■ WHERE CURRENT OF

UPDATEThe UPDATE statement is fully supported. However, only Oracle functions supported by the non-Oracle system can be used. Also, you cannot have SQL statements in the subquery that refer to the same table name in the outer query. Subqueries are not supported in the SET clause.

Oracle FunctionsAll functions are evaluated by the non-Oracle system after the gateway has converted them to the native SQL. Only a limited set of functions are assumed to be supported by the non-Oracle system. Most Oracle functions have no equivalent function in this limited set. Consequently, although post-processing is performed by the Oracle database, Oracle Database Gateway for ODBC does not support many Oracle functions, possibly impacting performance.

If an Oracle SQL function is not supported by Oracle Database Gateway for ODBC, this function is not supported in DELETE, INSERT, or UPDATE statements. In SELECT statements, these functions are evaluated by the Oracle database and processed after they are returned from the non-Oracle system.

If an unsupported function is used in a DELETE, INSERT, or UPDATE statement, it generates the following Oracle error:

ORA-02070: database db_link_name does not support function in this context

Oracle Database Gateway for ODBC assumes that ODBC driver provider that is being used supports the following minimum set of SQL functions:

■ AVG(exp)

■ LIKE(exp)

■ COUNT(*)

■ MAX(exp)

■ MIN(exp)

■ NOT

Data Dictionary C-1

CData Dictionary

Data dictionary information is stored in the non-Oracle system as system tables and is accessed through ODBC application programming interfaces (APIs). This appendix documents data dictionary translation support. It explains how to access non-Oracle data dictionaries, describes how to use supported views and tables, and explains data dictionary mapping.

This appendix contains the following topics:

■ Accessing the Non-Oracle Data Dictionary

■ Views and Tables Supported by Oracle Database Gateway for ODBC

Accessing the Non-Oracle Data DictionaryAccessing a non-Oracle data dictionary table or view is identical to accessing a data dictionary in an Oracle database. You issue a SELECT statement specifying a database link. The Oracle data dictionary view and column names are used to access the non-Oracle data dictionary. Synonyms of supported views are also acceptable.

For example, the following statement queries the data dictionary table ALL_USERS to retrieve all users in the non-Oracle system:

SQL SELECT * FROM all_users@sid1; When you issue a data dictionary access query, the ODBC agent:

1. Maps the requested table, view, or synonym to one or more ODBC APIs (see Section , "Data Dictionary Mapping"). The agent translates all data dictionary column names to their corresponding non-Oracle column names within the query.

2. Sends the sequence of APIs to the non-Oracle system.

3. Possibly converts the retrieved non-Oracle data to give it the appearance of the Oracle data dictionary table.

4. Passes the data dictionary information from the non-Oracle system table to Oracle.

Views and Tables Supported by Oracle Database Gateway for ODBCOracle Database Gateway for ODBC supports only the views and tables shown in Table C–1.

Note: The values returned when querying the Oracle Database Gateway for ODBC data dictionary may not be the same as those returned by the Oracle SQL*Plus DESCRIBE command.

Views and Tables Supported by Oracle Database Gateway for ODBC

C-2 Oracle Database Gateway for ODBC User's Guide

If you use an unsupported view, you receive an Oracle error message stating no rows were selected.

If you want to query data dictionary views using SELECT... FROM DBA_*, first connect as Oracle user SYSTEM or SYS. Otherwise, you receive the following error message:

ORA-28506: Parse error in data dictionary translation for %s stored in %s

Using Oracle Database Gateway for ODBC, queries of the supported data dictionary tables and views beginning with the characters ALL_ may return rows from the non-Oracle system when you do not have access privileges for those non-Oracle objects. When querying an Oracle database with the Oracle data dictionary, rows are returned only for those objects you are permitted to access.

Data Dictionary MappingThe tables in this section list Oracle data dictionary view names and the equivalent ODBC APIs used. Table C–1 shows a list of all Oracle data dictionary view names supported by Oracle Database Gateway for ODBC.

Table C–1 Oracle Database Gateway for ODBC Data Dictionary Mapping

View ODBC API

ALL_CATALOG SQLTables

ALL_COL_COMMENTS SQLColumns

ALL_CONS_COLUMNS SQLPrimaryKeys, SQLForeignKeys

ALL_CONSTRAINTS SQLPrimaryKeys, SQLForeignKeys

ALL_IND_COLUMNS SQLStatistics

ALL_INDEXES SQLStatistics

ALL_OBJECTS SQLTables, SQLProcedures, SQLStatistics

ALL_TAB_COLUMNS SQLColumns

ALL_TAB_COMMENTS SQLTables

ALL_TABLES SQLStatistics

ALL_USERS SQLTables

ALL_VIEWS SQLTables

DICTIONARY SQLTables

DICT_COLUMNS SQLTables

USER_COL_COMMENTS SQLColumns

USER_CONS_COLUMNS SQLPrimaryKeys, SQLForeignKeys

USER_CONSTRAINTS SQLPrimaryKeys, SQLForeignKeys

USER_IND_COLUMNS SQLStatistics

USER_INDEXES SQLStatistics

USER_OBJECTS SQLTables, SQLProcedures, SQLStatistics

USER_TABCOLUMNS SQLColumns

USER_TAB_COMMENTS SQLTables

USER_TABLES SQLStatistics


Data Dictionary C-3

Oracle Database Gateway for ODBC Data Dictionary DescriptionsThe Oracle Database Gateway for ODBC data dictionary tables and views provide the following information:

■ Name, data type, and width of each column

■ The contents of columns with fixed values

In the descriptions that follow, the values in the Null? column may differ from the Oracle data dictionary tables and views. Any default value is shown to the right of an item.

USER_USERS SQLTables

USER_VIEWS SQLTables

Table C–2 ALL_CATALOG

Name Type Value

OWNER VARCHAR2(30) -

TABLE_NAME VARCHAR2(30) -

TABLE_TYPE VARCHAR2(11) "TABLE" or "VIEW" or "SYNONYM"

Table C–3 ALL_COL_COMMENTS

Name Type Value



COLUMN_NAME VARCHAR2(30) -

COMMENTS VARCHAR2(4000) NULL

Table C–4 ALL_CONS_COLUMNS

Name Type Value


CONSTRAINT_NAME VARCHAR2(30) -



POSITION NUMBER -

Table C–5 ALL_CONSTRAINTS

Name Type Value



CONSTRAINT_TYPE VARCHAR2(1) "R" or "P"

Table C–1 (Cont.) Oracle Database Gateway for ODBC Data Dictionary Mapping

View ODBC API




SEARCH_CONDITION LONG NULL

R_OWNER VARCHAR2(30) -

R_CONSTRAINT_NAME VARCHAR2(30) -

DELETE_RULE VARCHAR2(9) "CASCADE" or "NO ACTION" or "SET NULL"

STATUS VARCHAR2(8) NULL

DEFERRABLE VARCHAR2(14) NULL

DEFERRED VARCHAR2(9) NULL

VALIDATED VARCHAR2(13) NULL

GENERATED VARCHAR2(14) NULL

BAD VARCHAR2(3) NULL

RELY VARCHAR2(4) NULL

LAST_CHANGE DATE NULL

Table C–6 ALL_IND_COLUMNS

Name Type Value

INDEX_OWNER VARCHAR2(30) -

INDEX_NAME VARCHAR2(30) -

TABLE_OWNER VARCHAR2(30) -



COLUMN_POSITION

NUMBER -

COLUMN_LENGTH

NUMBER -

DESCEND VARCHAR2(4) "DESC" or "ASC"

Table C–7 ALL_INDEXES

Name Type Value



INDEX_TYPE VARCHAR2(27) NULL



TABLE_TYPE CHAR(5) "TABLE"

UNIQUENESS VARCHAR2(9) "UNIQUE" or "NONUNIQUE"

Table C–5 (Cont.) ALL_CONSTRAINTS

Name Type Value


Data Dictionary C-5

COMPRESSION VARCHAR2(8) NULL

PREFIX_LENGTH NUMBER 0

TABLESPACE_NAME VARCHAR2(30) NULL

INI_TRANS NUMBER 0

MAX_TRANS NUMBER 0

INITIAL_EXTENT NUMBER 0

NEXT_EXTENT NUMBER 0

MIN_EXTENTS NUMBER 0

MAX_EXTENTS NUMBER 0

PCT_INCREASE NUMBER 0

PCT_THRESHOLD NUMBER 0

INCLUDE_COLUMNS NUMBER 0

FREELISTS NUMBER 0

FREELIST_GROUPS NUMBER 0

PCT_FREE NUMBER 0

LOGGING VARCHAR2(3) NULL

BLEVEL NUMBER 0

LEAF_BLOCKS NUMBER 0

DISTINCT_KEYS NUMBER

AVG_LEAF_BLOCKS_PER_KEY NUMBER 0

AVG_DATA_BLOCKS_PER_KEY NUMBER 0

CLUSTERING_FACTOR NUMBER 0


NUM_ROWS NUMBER 0

SAMPLE_SIZE NUMBER 0

LAST_ANALYZED DATE NULL

DEGREE VARCHAR2(40) NULL

INSTANCES VARCHAR2(40) NULL

PARTITIONED VARCHAR2(3) NULL

TEMPORARY VARCHAR2(1) NULL


SECONDARY VARCHAR2(1) NULL

BUFFER_POOL VARCHAR2(7) NULL

USER_STATS VARCHAR2(3) NULL

DURATION VARCHAR2(15) NULL

PCT_DIRECT_ACCESS NUMBER 0

ITYP_OWNER VARCHAR2(30) NULL

Table C–7 (Cont.) ALL_INDEXES

Name Type Value



ITYP_NAME VARCHAR2(30) NULL

PARAMETERS VARCHAR2(1000) NULL

GLOBAL_STATS VARCHAR2(3) NULL

DOMIDX_STATUS VARCHAR2(12) NULL

DOMIDX_OPSTATUS VARCHAR2(6) NULL

FUNCIDX_STATUS VARCHAR2(8) NULL

Table C–8 ALL_OBJECTS

Name Type Value


OBJECT_NAME VARCHAR2(30) -

SUBOBJECT_NAME VARCHAR2(30) NULL

OBJECT_ID NUMBER 0

DATA_OBJECT_ID NUMBER 0

OBJECT_TYPE VARCHAR2(18) "TABLE" or "VIEW" or "SYNONYM" or "INDEX" or "PROCEDURE"

CREATED DATE NULL

LAST_DDL_TIME DATE NULL

TIMESTAMP VARCHAR2(19) NULL





Table C–9 ALL_TAB_COLUMNS

Name Type Value




DATA_TYPE VARCHAR2(106) -

DATA_TYPE_MOD VARCHAR2(3) NULL

DATA_TYPE_OWNER VARCHAR2(30) NULL

DATA_LENGTH NUMBER -

DATA_PRECISION NUMBER -

DATA_SCALE NUMBER -

NULLABLE VARCHAR2(1) "Y" or "N"

COLUMN_ID NUMBER -

Table C–7 (Cont.) ALL_INDEXES

Name Type Value


Data Dictionary C-7

DEFAULT_LENGTH NUMBER 0

DATA_DEFAULT LONG NULL

NUM_DISTINCT NUMBER 0

LOW_VALUE RAW(32) NULL

HIGH_VALUE RAW(32) NULL

DENSITY NUMBER 0

NUM_NULLS NUMBER 0

NUM_BUCKETS NUMBER 0



CHARACTER_SET_NAME VARCHAR2(44) NULL

CHAR_COL_DEC_LENGTH NUMBER 0



AVG_COL_LEN NUMBER 0

Table C–10 ALL_TAB_COMMENTS

Name Type Value



TABLE_TYPE VARCHAR2(11) "TABLE" or "VIEW"


Table C–11 ALL_TABLES

Name Type Value




CLUSTER_NAME VARCHAR2(30) NULL

IOT_NAME VARCHAR2(30) NULL

PCT_FREE NUMBER 0

PCT_USED NUMBER 0

INI_TRANS NUMBER 0

MAX_TRANS NUMBER 0




Table C–9 (Cont.) ALL_TAB_COLUMNS

Name Type Value





FREELISTS NUMBER 0



BACKED_UP VARCHAR2(1) NULL

NUM_ROWS NUMBER -

BLOCKS NUMBER -

EMPTY_BLOCKS NUMBER 0

AVG_SPACE NUMBER 0

CHAIN_CNT NUMBER 0

AVG_ROW_LEN NUMBER 0

AVG_SPACE_FREELIST_BLOCKS

NUMBER 0

NUM_FREELIST_BLOCKS NUMBER 0



CACHE VARCHAR2(5) NULL

TABLE_LOCK VARCHAR2(8) NULL




IOT_TYPE VARCHAR2(12) NULL



NESTED VARCHAR2(3) NULL


ROW_MOVEMENT VARCHAR2(8) NULL



DURATION VARHCAR2(15) NULL

SKIP_CORRUPT VARCHAR2(8) NULL

MONITORING VARCHAR2(3) NULL

Table C–12 ALL_USERS

Name Type Value

USERNAME VARCHAR2(30) -

Table C–11 (Cont.) ALL_TABLES

Name Type Value


Data Dictionary C-9

USER_ID NUMBER 0

CREATED DATE NULL

Table C–13 ALL_VIEWS

Name Type Value


VIEW_NAME VARCHAR2(30) -

TEXT_LENGTH NUMBER 0

TEXT LONG NULL

TYPE_TEXT_LENGTH NUMBER 0

TYPE_TEXT VARCHAR2(4000) NULL

OID_TEXT_LENGTH NUMBER 0

OID_TEXT VARCHAR2(4000) NULL

VIEW_TYPE_OWNER VARCHAR2(30) NULL

VIEW_TYPE VARCHAR2(30) NULL

Table C–14 DICTIONARY

Name Type Value



Table C–15 DICT_COLUMNS

Name Type Value




Table C–16 USER_CATALOG

Name Type Value


TABLE_TYPE VARCHAR2(11) "TABLE" or, "VIEW" or "SYNONYM"

Table C–17 USER_COL_COMMENTS

Name Type Value




Table C–12 (Cont.) ALL_USERS

Name Type Value



Table C–18 USER_CONS_COLUMNS

Name Type Value





POSITION NUMBER -

Table C–19 USER_CONSTRAINTS

Name Type Value



CONSTRAINT_TYPE VARCHAR2(1) R or P


SEARCH_CONDITION LONG NULL

R_OWNER VARCHAR2(30) -

R_CONSTRAINT_NAME VARCHAR2(30) -

DELETE_RULE VARCHAR2(9) "CASCADE" or "NO ACTION" or "SET NULL"


DEFERRABLE VARCHAR2(14) NULL

DEFERRED VARCHAR2(9) NULL

VALIDATED VARCHAR2(13) NULL


BAD VARCHAR2(3) NULL

RELY VARCHAR2(4) NULL

LAST_CHANGE DATE NULL

Table C–20 USER_IND_COLUMNS

Name Type Value




COLUMN_POSITION NUMBER -

COLUMN_LENGTH NUMBER -

DESCEND VARCHAR2(4) "DESC" or "ASC"


Data Dictionary C-11

Table C–21 USER_INDEXES

Name Type Value


INDEX_TYPE VARCHAR2(27) NULL



TABLE_TYPE VARCHAR2(11) "TABLE"

UNIQUENESS VARCHAR2(9) "UNIQUE" or "NONUNIQUE"

COMPRESSION VARCHAR2(8) NULL

PREFIX_LENGTH NUMBER 0


INI_TRANS NUMBER 0

MAX_TRANS NUMBER 0






PCT_THRESHOLD NUMBER 0

INCLUDE_COLUMNS NUMBER 0

FREELISTS NUMBER 0


PCT_FREE NUMBER 0


BLEVEL NUMBER 0

LEAF_BLOCKS NUMBER 0

DISTINCT_KEYS NUMBER -

AVG_LEAF_BLOCKS_PER_KEY NUMBER 0

AVG_DATA_BLOCKS_PER_KEY NUMBER 0

CLUSTERING_FACTOR NUMBER 0


NUM_ROWS NUMBER 0













DURATION VARHCAR2(15) NULL

PCT_DIRECT_ACCESS NUMBER 0

ITYP_OWNER VARCHAR2(30) NULL

ITYP_NAME VARCHAR2(30) NULL

PARAMETERS VARCHAR2(1000) NULL


DOMIDX_STATUS VARCHAR2(12) NULL

DOMIDX_OPSTATUS VARCHAR2(6) NULL

FUNCIDX_STATUS VARCHAR2(8) NULL

Table C–22 USER_OBJECTS

Name Type Value

OBJECT_NAME VARCHAR2(128) -

SUBOBJECT_NAME VARCHAR2(30) NULL

OBJECT_ID NUMBER 0

DATA_OBJECT_ID NUMBER 0

OBJECT_TYPE VARCHAR2(18) "TABLE" or "VIEW" or "SYNONYM" or "INDEX" or "PROCEDURE"

CREATED DATE NULL

LAST_DDL_TIME DATE NULL

TIMESTAMP VARCHAR2(19) NULL





Table C–23 USER_TABCOLUMNS

Name Type Value



DATA_TYPE VARCHAR2(106) -

DATA_TYPE_MOD VARCHAR2(3) NULL

Table C–21 (Cont.) USER_INDEXES

Name Type Value



DATA_TYPE_OWNER VARCHAR2(30) NULL

DATA_LENGTH NUMBER -

DATA_PRECISION NUMBER -

DATA_SCALE NUMBER -

NULLABLE VARCHAR2(1) "Y" or "N"

COLUMN_ID NUMBER -

DEFAULT_LENGTH NUMBER NULL

DATA_DEFAULT LONG NULL

NUM_DISTINCT NUMBER NULL

LOW_VALUE RAW(32) NULL

HIGH_VALUE RAW(32) NULL

DENSITY NUMBER 0

NUM_NULLS NUMBER 0

NUM_BUCKETS NUMBER 0



CHARACTER_SET_NAME VARCHAR2(44) NULL

CHAR_COL_DECL_LENGTH NUMBER 0



AVG_COL_LEN NUMBER 0

Table C–24 USER_TAB_COMMENTS

Name Type Value


TABLE_TYPE VARCHAR2(11) "TABLE" or "VIEW"


Table C–25 USER_TABLES

Name Type Value



CLUSTER_NAME VARCHAR2(30) NULL

IOT_NAME VARCHAR2(30) NULL

PCT_FREE NUMBER 0

PCT_USED NUMBER 0

INI_TRANS NUMBER 0

Table C–23 (Cont.) USER_TABCOLUMNS

Name Type Value



MAX_TRANS NUMBER 0






FREELISTS NUMBER 0



BACKED_UP VARCHAR2(1) NULL

NUM_ROWS NUMBER -

BLOCKS NUMBER -

EMPTY_BLOCKS NUMBER 0

AVG_SPACE NUMBER 0

CHAIN_CNT NUMBER 0

AVG_ROW_LEN NUMBER 0

AVG_SPACE_FREELIST_BLOCKS

NUMBER 0

NUM_FREELIST_BLOCKS NUMBER 0



CACHE VARCHAR2(5) NULL

TABLE_LOCK VARCHAR2(8) NULL




IOT_TYPE VARCHAR2(12) NULL

TEMPORARY VARHCAR2(1) NULL


NESTED VARCHAR2(3) NULL


ROW_MOVEMENT VARCHAR2(8) NULL



DURATION VARCHAR2(15) NULL

SKIP_CORRUPT VARCHAR2(8) NULL

MONITORING VARCHAR2(3) NULL

Table C–25 (Cont.) USER_TABLES

Name Type Value



Table C–26 USER_USERS

Name Type Value

USERNAME VARCHAR2(30) -

USER_ID NUMBER 0

ACCOUNT_STATUS VARCHAR2(32) OPEN

LOCK_DATE DATE NULL

EXPIRY_DATE DATE NULL

DEFAULT_TABLESPACE VARCHAR2(30) NULL

TEMPORARY_TABLESPACE

VARCHAR2(30) NULL

CREATED DATE NULL

INITIAL_RSRC_CONSUMER_GROUP

VARCHAR2(30) NULL

EXTERNAL_NAME VARCHAR2(4000) NULL

Table C–27 USER_VIEWS

Name Type Value

VIEW_NAME VARCHAR2(30) -

TEXT_LENGTH NUMBER 0

TEXT LONG NULL

TYPE_TEXT_LENGTH NUMBER 0

TYPE_TEXT VARCHAR2(4000) NULL

OID_TEXT_LENGTH NUMBER 0

OID_TEXT VARCHAR2(4000) NULL

VIEW_TYPE_OWNER VARCHAR2(30) NULL

VIEW_TYPE VARCHAR2(30) NULL

Initialization Parameters D-1

DInitialization Parameters

The Oracle database initialization parameters in the init.ora file are distinct from gateway initialization parameters. Set the gateway parameters in the initialization parameter file using an agent-specific mechanism, or set them in the Oracle data dictionary using the DBMS_HS package. The gateway initialization parameter file must be available when the gateway is started.

This appendix contains a list of the gateway initialization parameters that can be set for each gateway and their description. It also describes the initialization parameter file syntax. It includes the following sections:

■ Initialization Parameter File Syntax

■ Oracle Database Gateway for ODBC Initialization Parameters

■ Initialization Parameter Descriptions

Initialization Parameter File SyntaxThe syntax for the initialization parameter file is as follows:

1. The file is a sequence of commands.

2. Each command should start on a separate line.

3. End of line is considered a command terminator (unless escaped with a backslash).

4. If there is a syntax error in an initialization parameter file, none of the settings take effect.

5. Set the parameter values as follows:

[SET][PRIVATE] parameter=value

Where:

parameter is an initialization parameter name. It is a string of characters starting with a letter and consisting of letters, digits and underscores. Initialization parameter names are case sensitive.

value is the initialization parameter value. It is case sensitive. An initialization parameter value is either:

a. A string of characters that does not contain any backslashes, white space or double quotation marks (")

b. A quoted string beginning with a double quotation mark and ending with a double quotation mark. The following can be used inside a quoted string:

Oracle Database Gateway for ODBC Initialization Parameters

D-2 Oracle Database Gateway for ODBC User's Guide

* backslash (\) is the escape character

* \n inserts a new line

* \t inserts a tab

* \" inserts a double quotation mark

* \\ inserts a backslash

A backslash at the end of the line continues the string on the next line. If a backslash precedes any other character then the backslash is ignored.

For example, to enable tracing for an agent, set the HS_FDS_TRACE_LEVEL initialization parameter as follows:

HS_FDS_TRACE_LEVEL=ON

SET and PRIVATE are optional keywords. You cannot use either as an initialization parameter name. Most parameters are needed only as initialization parameters, so you usually do not need to use the SET or PRIVATE keywords. If you do not specify either SET or PRIVATE, the parameter is used only as an initialization parameter for the agent.

SET specifies that, in addition to being used as an initialization parameter, the parameter value is set as an environment variable for the agent process. Use SET for parameter values that the drivers or non-Oracle system need as environment variables.

PRIVATE specifies that the initialization parameter should be private to the agent and should not be uploaded to the Oracle database. Most initialization parameters should not be private. If, however, you are storing sensitive information like a password in the initialization parameter file, then you may not want it uploaded to the server because the initialization parameters and values are not encrypted when uploaded. Making the initialization parameters private prevents the upload from happening and they do not appear in dynamic performance views. Use PRIVATE for the initialization parameters only if the parameter value includes sensitive information such as a user name or password.

SET PRIVATE specifies that the parameter value is set as an environment variable for the agent process and is also private (not transferred to the Oracle database, not appearing in dynamic performance views or graphical user interfaces).

Oracle Database Gateway for ODBC Initialization ParametersThis section lists all the initialization file parameters that can be set for the Oracle Database Gateway for ODBC. They are as follows:

■ HS_DB_DOMAIN

■ HS_DB_INTERNAL_NAME

■ HS_DB_NAME

■ HS_DESCRIBE_CACHE_HWM

■ HS_LANGUAGE

■ HS_LONG_PIECE_TRANSFER_SIZE

■ HS_OPEN_CURSORS

■ HS_RPC_FETCH_REBLOCKING

■ HS_RPC_FETCH_SIZE

Initialization Parameter Description


■ HS_FDS_SHAREABLE_NAME

■ HS_TIME_ZONE

■ IFILE

■ HS_FDS_CONNECT_INFO

■ HS_FDS_DEFAULT_OWNER

■ HS_FDS_TRACE_LEVEL

■ HS_TRANSACTION_MODEL

■ HS_FDS_FETCH_ROWS

■ HS_FDS_REMOTE_DB_CHARSET

■ HS_FDS_SQLLEN_INTERPRETATION

■ HS_FDS_REPORT_REAL_AS_DOUBLE

Initialization Parameter DescriptionThe following sections describe all the initialization file parameters that can be set for gateways.

HS_DB_DOMAIN

Specifies a unique network sub-address for a non-Oracle system. The HS_DB_DOMAIN initialization parameter is similar to the DB_DOMAIN initialization parameter, described in the Oracle Database Reference. The HS_DB_DOMAIN initialization parameter is required if you use the Oracle Names server. The HS_DB_NAME and HS_DB_DOMAIN initialization parameters define the global name of the non-Oracle system.

HS_DB_INTERNAL_NAME

Specifies a unique hexadecimal number identifying the instance to which the Heterogeneous Services agent is connected. This parameter's value is used as part of a transaction ID when global name services are activated. Specifying a nonunique number can cause problems when two-phase commit recovery actions are necessary for a transaction.

Property Description

Default value WORLD

Range of values 1 to 199 characters

Note: The HS_DB_NAME and HS_DB_DOMAIN initialization parameters must combine to form a unique address in a cooperative server environment.


Default value 01010101

Range of values 1 to 16 hexadecimal characters



HS_DB_NAME

Specifies a unique alphanumeric name for the data store given to the non-Oracle system. This name identifies the non-Oracle system within the cooperative server environment. The HS_DB_NAME and HS_DB_DOMAIN initialization parameters define the global name of the non-Oracle system.

HS_DESCRIBE_CACHE_HWM

Specifies the maximum number of entries in the describe cache used by Heterogeneous Services. This limit is known as the describe cache high water mark. The cache contains descriptions of the mapped tables that Heterogeneous Services reuses so that it does not have to re-access the non-Oracle data store.

If you are accessing many mapped tables, increase the high water mark to improve performance. Increasing the high water mark improves performance at the cost of memory usage.

HS_LANGUAGE

Provides Heterogeneous Services with character set, language, and territory information of the non-Oracle data source. The value must use the following format:

language[_territory.character_set]

Character SetsIdeally, the character sets of the Oracle database and the non-Oracle data source are the same. In almost all cases, HS_LANGUAGE should be set exactly the same as Oracle database character set for optimal character set mapping and performance. If they are not the same, Heterogeneous Services attempts to translate the character set of the non-Oracle data source to the Oracle database character set, and back again. The


Default value HO

Range of values 1 to 8 characters


Default value 100

Range of values 1 to 4000


Default value System-specific

Range of values Any valid language name (up to 255 characters)

Note: The globalization support initialization parameters affect error messages, the data for the SQL Service, and parameters in distributed external procedures.



translation can degrade performance. In some cases, Heterogeneous Services cannot translate a character from one character set to another.

As more Oracle databases and non-Oracle databases use Unicode as database character sets, it is preferable to also run the gateway in Unicode character set. To do so, you must set HS_LANGUAGE=AL32UTF8. However, when the gateway runs on Windows, the Microsoft ODBC Driver Manager interface can exchange data only in the double-byte character set, UCS2. This results in extra ratio expansion of described buffer and column sizes. Refer to HS_FDS_REMOTE_DB_CHARSET for instruction on how to adjust to correct sizes.

LanguageThe language component of the HS_LANGUAGE initialization parameter determines:

■ Day and month names of dates

■ AD, BC, PM, and AM symbols for date and time

■ Default sorting mechanism

Note that Oracle does not determine the language for error messages for the generic Heterogeneous Services messages (ORA-25000 through ORA-28000). These are controlled by the session settings in the Oracle database.

TerritoryThe territory clause specifies the conventions for day and week numbering, default date format, decimal character and group separator, and ISO and local currency symbols. Note that the level of globalization support between the Oracle database and the non-Oracle data source depends on how the gateway is implemented.

HS_LONG_PIECE_TRANSFER_SIZE

Sets the size of the piece of LONG data being transferred. A smaller piece size means less memory requirement, but more round-trips to fetch all the data. A larger piece size means fewer round-trips, but more of a memory requirement to store the intermediate pieces internally. Thus, the initialization parameter can be used to tune a system for the best performance, with the best trade-off between round-trips and memory requirements, and network latency or response time.

HS_OPEN_CURSORS

Note: The specified character set must be a superset of the operating system character set on the platform where the agent is installed.


Default value 64 KB

Range of values Any value up to 2 GB


Default value 50



Defines the maximum number of cursors that can be open on one connection to a non-Oracle system instance.

The value never exceeds the number of open cursors in the Oracle database. Therefore, setting the same value as the OPEN_CURSORS initialization parameter in the Oracle database is recommended.

HS_RPC_FETCH_REBLOCKING

Controls whether Heterogeneous Services attempts to optimize performance of data transfer between the Oracle database and the Heterogeneous Services agent connected to the non-Oracle data store.

The following values are possible:

■ OFF disables reblocking of fetched data so that data is immediately sent from agent to server.

■ ON enables reblocking, which means that data fetched from the non-Oracle system is buffered in the agent and is not sent to the Oracle database until the amount of fetched data is equal or higher than the value of HS_RPC_FETCH_SIZE initialization parameter. However, any buffered data is returned immediately when a fetch indicates that no more data exists or when the non-Oracle system reports an error.

HS_RPC_FETCH_SIZE

Tunes internal data buffering to optimize the data transfer rate between the server and the agent process.

Increasing the value can reduce the number of network round-trips needed to transfer a given amount of data, but also tends to increase data bandwidth and to reduce latency as measured between issuing a query and completion of all fetches for the query. Nevertheless, increasing the fetch size can increase latency for the initial fetch results of a query, because the first fetch results are not transmitted until additional data is available.

Range of values 1 to the value of OPEN_CURSORS initialization parameter of Oracle database


Default value ON

Range of values OFF or ON


Default value 50000

Range of values 1 to 10000000




HS_TIME_ZONE

Specifies the default local time zone displacement for the current SQL session. The format mask, [+|-]hh:mm, is specified to indicate the hours and minutes before or after UTC (Coordinated Universal Time—formerly Greenwich Mean Time). For example:

HS_TIME_ZONE = [+ | -] hh:mm

HS_TRANSACTION_MODEL

Specifies the type of transaction model that is used when the non-Oracle database is updated by a transaction.

The following values are possible:

■ COMMIT_CONFIRM provides read and write access to the non-Oracle database and allows the gateway to be part of a distributed update. To use the commit-confirm model, the following items must be created in the non-Oracle database:

– Transaction log table. The default table name is HS_TRANSACTION_LOG. A different name can be set using the HS_FDS_TRANSACTION_LOG parameter. The transaction log table must be granted SELECT, DELETE, and INSERT privileges set to public.

– Recovery account. The account name is assigned with the HS_FDS_RECOVERY_ACCOUNT parameter.

– Recovery account password. The password is assigned with the HS_FDS_RECOVERY_PWD parameter.

■ READ_ONLY provides read access to the non-Oracle database.

■ SINGLE_SITE provides read and write access to the non-Oracle database. However, the gateway cannot participate in distributed updates.

■ READ_ONLY_AUTOCOMMIT provides read access to the non-Oracle database that do not have logging.

■ SINGLE_SITE_AUTOCOMMIT provides read and write access to the non-Oracle database which do not have logging. Any update is committed immediately, and the gateway cannot participate in distributed updates.


Default value for '[+|-]hh:mm'

Derived from the NLS_TERRITORY initialization parameter

Range of values for '[+|-]hh:mm'

Any valid datetime format mask


Default Value COMMIT_CONFIRM

Range of Values COMMIT_CONFIRM, READ_ONLY, READ_ONLY_AUTOCOMMIT, SINGLE_SITE, SINGLE_SITE_AUTOCOMMIT



IFILE

Use the IFILE initialization parameter to embed another initialization file within the current initialization file. The value should be an absolute path and should not contain environment variables. The three levels of nesting limit do not apply.

HS_FDS_CONNECT_INFO

HS_FDS_CONNECT_INFO which describes the connection to the non-Oracle system.

The default initialization parameter file already has an entry for this parameter. The syntax for HS_FDS_CONNECT_INFO for the gateway is as follows:

HS_FDS_CONNECT_INFO=dsn_value

where, dsn_value on Microsoft Windows, is the name of the system DSN defined in the Microsoft Windows ODBC Data Source Administrator and on UNIX based system, it is data source name configured in the odbc.ini file.

The entry for dsn_value is case sensitive.

HS_FDS_DEFAULT_OWNER

The name of the table owner that is used for the non-Oracle database tables if an owner is not specified in the SQL statements.


Default value None

Range of values Valid parameter file names

See Also: Oracle Database Reference


Default Value None

Range of Values Not applicable


Default Value None


Note: If this parameter is not specified and the owner is not explicitly specified in the SQL statement, then the user name of the Oracle user or the user name specified when creating the database link is used.



HS_FDS_TRACE_LEVEL

Specifies whether error tracing is turned on or off for gateway connectivity.

The following values are valid:

■ OFF disables the tracing of error messages.

■ ON enables the tracing of error messages that occur when you encounter problems. The results are written by default to a gateway log file in LOG directory where the gateway is installed.

■ DEBUG enables the tracing of detailed error messages that can be used for debugging.

HS_FDS_SHAREABLE_NAME

Specifies the full path name to the ODBC driver manager.

This is a required parameter, whose format is:

HS_FDS_SHAREABLE_NAME=odbc_installation_path/lib/libodbc.sl

Where:

odbc_installation_path is the path where the ODBC driver is installed.

This parameter applies only to UNIX based platforms.

HS_FDS_FETCH_ROWS

HS_FDS_FETCH_ROWS specifies the fetch array size. This is the number of rows to be fetched from the non-Oracle database and to return to Oracle database at one time. This parameter will be affected by the HS_RPC_FETCH_SIZE and HS_RPC_FETCH_REBLOCKING parameters.


Default Value OFF

Range of values OFF, ON, DEBUG


Default Value None



Default Value 100

Range of Values Any integer between 1 and 1000

Syntax HS_FDS_FETCH_ROWS=num



HS_FDS_REMOTE_DB_CHARSET

This parameter is valid only when HS_LANGUAGE is set to AL32UTF8 and the gateway runs on Windows. As more Oracle databases and non-Oracle databases use Unicode as database character sets, it is preferable to also run the gateway in Unicode character set. To do so, you must set HS_LANGUAGE=AL32UTF8. However, when the gateway runs on Windows, the Microsoft ODBC Driver Manager interface can exchange data only in the double-byte character set, UCS2. This results in extra ratio expansion of described buffer and column sizes. To compensate, the gateway can adjust to correct size if HS_FDS_REMOTE_DB_CHARSET is set to the corresponding non-Oracle database character set. For example, HS_FDS_REMOTE_DB_CHARSET=KO16KSC5601.

HS_FDS_SQLLEN_INTERPRETATION

This parameter is only valid for 64 bit platforms. ODBC standard specifies SQLLEN (of internal ODBC construct) being 64 bit on 64 bit platforms, but some ODBC driver managers and drivers violate this convention, and implement it as 32 bit. In order for Oracle Database Gateway for ODBC to compensate their behavior, you need to specify HS_FDS_SQLLEN_INTERPRETATION=32 if you use these types of driver managers and driver.

HS_FDS_REPORT_REAL_AS_DOUBLE

Enables Oracle Database Gateway for ODBC treat SINGLE FLOAT PRECISION fields as DOUBLE FLOAT PRECISION fields.


Default Value None

Range of values Not applicable

Syntax HS_FDS_REMOTE_DB_CHARSET


Default Value 64

Range of values {64|32}

Syntax HS_FDS_SQLLEN_INTERPRETATION= {64|32}


Default Value FALSE

Range of Values TRUE, FALSE

Index-1

Index

AALTER statement, B-1

Ccharacter sets

Heterogeneous Services, D-4CONNECT BY clause, 2-3CREATE statement, B-1

Ddata definition language, B-1data dictionary

contents with Oracle Database Gateway for ODBC, C-1

mapping for Oracle Database Gateway for ODBC, C-2

Oracle database name/SQL Server name, C-2translation support for Oracle Database Gateway

for ODBC, C-1data dictionary views

Oracle Database Gateway for ODBC, C-1data type

VARBINARY, 2-4DELETE statement, B-1describe cache high water mark

definition, D-4drivers

ODBC, 1-5DROP statement, B-1

EEncrypted format login, 2-4Error messages

error tracing, D-9

Ffetch array size, with HS_FDS_FETCH_ROWS, D-9

Ggateway

pass-through feature, 2-1

supported functions, B-1supported SQL syntax, B-1

globalization supportHeterogeneous Services, D-4

GRANT statement, B-1

HHeterogeneous Services

defining maximum number of open cursors, D-5optimizing data transfer, D-6Oracle Database Gateway for ODBC

architecture, 1-2definition, 1-2non-Oracle data dictionary access, C-1ODBC connectivity requirements, 1-5supported functions, B-2supported SQL syntax, B-1supported tables, C-1

setting global name, D-4specifying cache high water mark, D-4tuning internal data buffering, D-6tuning LONG data transfer, D-5

HS_DB_NAME initialization parameter, D-4HS_DESCRIBE_CACHE_HWM initialization

parameter, D-4HS_FDS_CONNECT_INFO, D-8HS_FDS_DEFAULT_OWNER initialization

parameter, D-8HS_FDS_FETCH_ROWS parameter, D-9HS_FDS_RECOVERY_PWD initialization

parameter, D-10HS_FDS_SHAREABLE_NAME initialization

parameter, D-9HS_FDS_TRACE_LEVEL initialization

parameter, D-9enabling agent tracing, D-2

HS_LANGUAGE initialization parameter, D-4HS_LONG_PIECE_TRANSFER_SIZE initialization

parameter, D-5HS_OPEN_CURSORS initialization parameter, D-5HS_RPC_FETCH_REBLOCKING initialization

parameter, D-6HS_RPC_FETCH_SIZE initialization parameter, D-6HS_TIME_ZONE initialization parameter, D-7

Index-2

IIFILE initialization parameter, D-8Initialization parameter file

customizing, D-1INSERT statement, B-1

KKnown restrictions, 2-2

OODBC agents

connectivity requirements, 1-5functions, 1-5

ODBC connectivitydata dictionary mapping, C-2ODBC driver, 1-5requirements, 1-5specifying path to library, D-9

OLE DB connectivitydata dictionary mapping, C-2

Oracle Database Gateway for ODBCarchitecture, 1-2

Oracle and non-Oracle on same machine, 1-4Oracle and non-Oracle on separate

machines, 1-3data dictionary

translation support, C-1definition, 1-2DELETE statement, B-2INSERT statement, B-2non-Oracle data dictionary access, C-1ODBC connectivity requirements, 1-5supported functions, B-2supported SQL syntax, B-1UPDATE statement, B-2

Pparameters

gateway initialization fileHS_FDS_FETCH_ROWS, D-9

RROWID, 2-3

SSELECT statement, B-2

accessing non-Oracle system, C-1

TTRUNCATE statement, B-1

Uunsupported functions

Oracle Database Gateway for ODBC, B-2

UPDATE statement, B-2

VVARBINARY data type, 2-4

WWHERE CURRENT OF clause, 2-3

ContentsPrefaceAudienceDocumentation AccessibilityRelated DocumentsConventions

1 IntroductionOverviewHeterogeneous Services TechnologyOracle Database Gateway for ODBCOracle Database Gateway for ODBC ArchitectureOracle and Non-Oracle Systems on Separate MachinesOracle and Non-Oracle Systems on the Same Machine


2 Oracle Database Gateway for ODBC Features and RestrictionsUsing the Pass-Through FeatureAUTO COMMITKnown RestrictionsCOMMIT or ROLLBACK in PL/SQL Cursor Loops Closes Open CursorsSQL SyntaxWHERE CURRENT OF ClauseCONNECT BY ClauseROWIDEXPLAIN PLAN Statement

Does not support CALLBACK links

Known ProblemsEncrypted Format LoginDate Arithmetic

A Data Type ConversionMapping ODBC Data Types to Oracle Data Types

B Supported SQL Syntax and FunctionsSupported SQL StatementsDELETEINSERTSELECTUPDATE

Oracle Functions

C Data DictionaryAccessing the Non-Oracle Data DictionaryViews and Tables Supported by Oracle Database Gateway for ODBCData Dictionary MappingOracle Database Gateway for ODBC Data Dictionary Descriptions

D Initialization ParametersInitialization Parameter File SyntaxOracle Database Gateway for ODBC Initialization ParametersInitialization Parameter DescriptionHS_DB_DOMAINHS_DB_INTERNAL_NAMEHS_DB_NAMEHS_DESCRIBE_CACHE_HWMHS_LANGUAGECharacter SetsLanguageTerritory

HS_LONG_PIECE_TRANSFER_SIZEHS_OPEN_CURSORSHS_RPC_FETCH_REBLOCKINGHS_RPC_FETCH_SIZEHS_TIME_ZONEHS_TRANSACTION_MODELIFILEHS_FDS_CONNECT_INFOHS_FDS_DEFAULT_OWNERHS_FDS_TRACE_LEVELHS_FDS_SHAREABLE_NAMEHS_FDS_FETCH_ROWSHS_FDS_REMOTE_DB_CHARSETHS_FDS_SQLLEN_INTERPRETATIONHS_FDS_REPORT_REAL_AS_DOUBLE

IndexACDEFGHIKOPRSTUVW