oracle payroll admin guide
TRANSCRIPT
-
8/19/2019 Oracle Payroll Admin Guide
1/60
R12.x Oracle Payroll
Fundamentals: Configuration
(Global)
Activity Guide
D60571GC10
Edition 1.0
March 2010
D65980
-
8/19/2019 Oracle Payroll Admin Guide
2/60
Copyright © 2007, 2009 Oracle. All rights reserved.
Disclaimer
This document contains proprietary information and is protected by copyright and other intellectual property laws. You may copy andprint this document solely for your own use in an Oracle training course. The document may not be modified or altered in any way.Except where your use constitutes "fair use" under copyright law, you may not use, share, download, upload, copy, print, display,perform, reproduce, publish, license, post, transmit, or distribute this document in whole or in part without the express authorizationof Oracle.
The information contained in this document is subject to change without notice. If you find any problems in the document, pleasereport them in writing to: Oracle University, 500 Oracle Parkway, Redwood Shores, California 94065 USA. This document is notwarranted to be error-free.
Restricted Rights Notice
If this documentation is delivered to the United States Government or anyone using the documentation on behalf of the UnitedStates Government, the following notice is applicable:
U.S. GOVERNMENT RIGHTSThe U.S. Government’s rights to use, modify, reproduce, release, perform, display, or disclose these training materials are restrictedby the terms of the applicable Oracle license agreement and/or the applicable U.S. Government contract.
Trademark Notice
Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective
owners.
Author
Swathi Mathur
Technical Contributors and Reviewers
Bob Oganovic
This book was published using: Oracle Tutor
-
8/19/2019 Oracle Payroll Admin Guide
3/60
Copyright © Oracle 2009. All rights reserved.
R12.x Oracle Payroll Fundamentals: Configuration (Global) Table of Contentsi
Table of Contents
R12.x Payroll Fundamentals: Configuration Practices and Solutions........................................................1-1 R12.x Payroll Fundamentals: Configuration .................................................................................................1-3 Objectives......................................................................................................................................................1-4
Payroll Configuration - Introduction .............................................................................................................1-5 Payroll Configuration Fundamentals.............................................................................................................1-6 Defining Payrolls for Your Organization ......................................................................................................1-7
Practice: Defining Payment Methods ........................................................................................................1-8 Solution: Defining Payment Methods........................................................................................................1-10 Practice - Defining Consolidation Sets......................................................................................................1-15 Solution: Defining Consolidation Sets ......................................................................................................1-16 Practice: Defining a Payroll.......................................................................................................................1-17 Solution: Defining a Payroll ......................................................................................................................1-20
Maintaining PAYE and NI (U.K. only).........................................................................................................1-25 Practice: Entering NI Details for a Company Director ..............................................................................1-26 Solution: Entering NI Details for a Company Director .............................................................................1-27 Practice: Entering PAYE Details for an Employee ...................................................................................1-29 Solution: Entering PAYE Details for an Employee...................................................................................1-30 Practice: Entering NI Details for an Employee..........................................................................................1-31 Solution: Entering NI Details for an Employee.........................................................................................1-32
Maintaining Other Deductions (U.K. Only) ..................................................................................................1-35 Practice: Maintaining Student Loans.........................................................................................................1-36 Solution: Maintaining Student Loans ........................................................................................................1-37 Practice: Maintaining Tax Credits .............................................................................................................1-38 Solution: Maintaining Tax Credits ............................................................................................................1-39
Costing Overview..........................................................................................................................................1-41 Processing Costs............................................................................................................................................1-42
Guided Demonstration - Previewing Cost Allocations..............................................................................1-43 Practice - Allocating Costs ........................................................................................................................1-44 Solution - Allocating Costs........................................................................................................................1-46
Payroll Configuration - Summary .................................................................................................................1-58
-
8/19/2019 Oracle Payroll Admin Guide
4/60
-
8/19/2019 Oracle Payroll Admin Guide
5/60
Copyright © Oracle 2009. All rights reserved.
R12.x Oracle Payroll Fundamentals: Configuration (Global) Table of Contentsiii
Preface
Profile
Before You Begin This Course
• Working experience with Oracle Applications
• Working experience with earnings and deductions elements in Oracle HRMS
Prerequisites
• D48180GC10 R12 HRMS Total View
• D60573GC10 R12 Compensation Management Fundamentals: Earnings andDeductions
• D47341GC10 R12 Compensation Workbench and Salary Configuration
• D17308GC10 11i Compensation Management Fundamentals: Earnings and Deductions
How This Course Is Organized
This is an instructor-led course featuring lecture and hands-on exercises. Online demonstrations
and written practice sessions reinforce the concepts and skills introduced.
-
8/19/2019 Oracle Payroll Admin Guide
6/60
Copyright © Oracle 2009. All rights reserved.
R12.x Oracle Payroll Fundamentals: Configuration (Global) Table of Contentsiv
Related Publications
Oracle Publications
Title Part Number
Oracle HRMS Payroll Processing Management Guide E13514-03
Additional Publications
• System release bulletins
• Installation and user’s guides
• Read-me files
• International Oracle User’s Group (IOUG) articles
• Oracle Magazine
-
8/19/2019 Oracle Payroll Admin Guide
7/60
Copyright © Oracle 2009. All rights reserved.
R12.x Oracle Payroll Fundamentals: Configuration (Global) Table of Contentsv
Typographic Conventions
Typographic Conventions in Text
Convention Element Example
Bold italic Glossary term (ifthere is a glossary)
The algorithm inserts the new key.
Caps and
lowercase
Buttons,
check boxes,
triggers,
windows
Click the Executable button.
Select the Can’t Delete Card check box.
Assign a When-Validate-Item trigger to the ORD block.
Open the Master Schedule window.
Courier new,
case sensitive
(default is
lowercase)
Code output,
directory names,
filenames,
passwords,
pathnames,
URLs,
user input,usernames
Code output: debug.set (‘I”, 300);
Directory: bin (DOS), $FMHOME (UNIX)
Filename: Locate the init.ora file.
Password: User tiger as your password.
Pathname: Open c:\my_docs\projects
URL: Go to http://www.oracle.com
User input: Enter 300
Username: Log on as scott
Initial cap Graphics labels
(unless the term is a
proper noun)
Customer address (but Oracle Payables)
Italic Emphasized words
and phrases,
titles of books and
courses,
variables
Do not save changes to the database.
For further information, see Oracle7 Server SQL Language
Reference Manual.
Enter [email protected], where user_id is the
name of the user.
Quotation
marks
Interface elements
with long namesthat have only
initial caps;
lesson and chapter
titles in cross-
references
Select “Include a reusable module component” and click Finish.
This subject is covered in Unit II, Lesson 3, “Working with
Objects.”
Uppercase SQL column
names, commands,
functions, schemas,
table names
Use the SELECT command to view information stored in the
LAST_NAME
column of the EMP table.
Arrow Menu paths Select File > Save.Brackets Key names Press [Enter].
Commas Key sequences Press and release keys one at a time:[Alternate], [F], [D]
Plus signs Key combinations Press and hold these keys simultaneously: [Ctrl]+[Alt]+[Del]
-
8/19/2019 Oracle Payroll Admin Guide
8/60
Copyright © Oracle 2009. All rights reserved.
R12.x Oracle Payroll Fundamentals: Configuration (Global) Table of Contentsviii
Typographic Conventions in Code
Convention Element Example
Caps and
lowercase
Oracle Forms
triggers
When-Validate-Item
Lowercase Column names,
table names
SELECT last_nameFROM s_emp;
Passwords DROP USER scottIDENTIFIED BY tiger;
PL/SQL objects OG_ACTIVATE_LAYER(OG_GET_LAYER (‘prod_pie_layer’))
Lowercase
italic
Syntax variables CREATE ROLE role
Uppercase SQL commands and
functions
SELECT useridFROM emp;
Typographic Conventions in Oracle Application Navigation Paths
This course uses simplified navigation paths, such as the following example, to direct you
through Oracle Applications.
(N) Invoice > Entry > Invoice Batches Summary (M) Query > Find (B) Approve
This simplified path translates to the following:
1. (N) From the Navigator window, select Invoice then Entry then Invoice Batches
Summary.
2. (M) From the menu, select Query then Find.
3. (B) Click the Approve button.
Notations:
(N) = Navigator
(M) = Menu
(T) = Tab
(B) = Button
(I) = Icon
(H) = Hyperlink
(ST) = Sub Tab
-
8/19/2019 Oracle Payroll Admin Guide
9/60
Copyright © Oracle 2009. All rights reserved.
R12.x Oracle Payroll Fundamentals: Configuration (Global) Table of Contentsvii
Typographical Conventions in Oracle Application Help System Paths
This course uses a “navigation path” convention to represent actions you perform to find
pertinent information in the Oracle Applications Help System.
The following help navigation path, for example—
(Help) General Ledger > Journals > Enter Journals
—represents the following sequence of actions:
1. In the navigation frame of the help system window, expand the General Ledger entry.
2. Under the General Ledger entry, expand Journals.
3. Under Journals, select Enter Journals.
4. Review the Enter Journals topic that appears in the document frame of the help system
window.
-
8/19/2019 Oracle Payroll Admin Guide
10/60
Copyright © Oracle 2009. All rights reserved.
R12.x Oracle Payroll Fundamentals: Configuration (Global) Table of Contentsviii
-
8/19/2019 Oracle Payroll Admin Guide
11/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 1
R12.x Payroll Fundamentals:Configuration Practices andSolutions
Chapter 1
-
8/19/2019 Oracle Payroll Admin Guide
12/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 2
-
8/19/2019 Oracle Payroll Admin Guide
13/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 3
R12.x Payroll Fundamentals: Configuration
-
8/19/2019 Oracle Payroll Admin Guide
14/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 4
Objectives
-
8/19/2019 Oracle Payroll Admin Guide
15/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 5
Payroll Configuration - Introduction
There are no Practices and Demonstrations in this Lesson.
-
8/19/2019 Oracle Payroll Admin Guide
16/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 6
Payroll Configuration Fundamentals
There are no Practices and Demonstrations in this Lesson.
-
8/19/2019 Oracle Payroll Admin Guide
17/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 7
Defining Payrolls for Your Organization
-
8/19/2019 Oracle Payroll Admin Guide
18/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 8
Practice: Defining Payment Methods
Overview
In this practice you will learn how to define the following Payment Methods for your Organizationusing the same source bank payroll account:
• Cheque
• Direct Deposit
• Third Party Payment
Assumptions• You can use the OU HRMS Manager or OU Super HRMS Manager responsibility to
perform this task. In this practice, we log in as ouhrms/welcome and use the OU HRMSManager responsibility.
• You must have access to an Oracle Application Vision database or comparable trainingor test instance at your site on which to complete this practice.
• Set your effective date to 01-JAN-2000.
• This practice covers only the required steps for performing this task.
• Replace xx with your initials or the unique group identifier provided by your instructor.
Tasks
Login
Login to Vision and navigate to the Organizational Payment Method window.
Define a Cheque Payment Method
Enter the required fields for a Cheque Payment Method to define currency, source bank details,and GL cash account.
Define a Direct Deposit Payment MethodEnter the required fields for a Direct Deposit Payment Method to define currency, source bankdetails, and GL cash account.
Define a Third Party Payment Method
Enter the required fields for a Third Party Payment Method to define currency, source bankdetails, and GL cash account.
-
8/19/2019 Oracle Payroll Admin Guide
19/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 9
Solution: Defining Payment Methods
Login
1. Navigate to the Organizational Payment Method window:
(N) Payroll > Payment Methods
2. Set your effective date for this exercise to 01-JAN-2000.
-
8/19/2019 Oracle Payroll Admin Guide
20/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 10
Define a Cheque Payment Method
3. Enter Cheque_xx as your payment method name.
4. Select Cheque-United Kingdom as the payment method type.
5. Leave the Third Party Payment box unchecked.
6. Select United Kingdom as the Source Bank-Country.
7. Enter the following GB Bank Details:
Sort Code
Bank Name
Bank Branch
Account Number
Account Name
Account Type
8. Navigate to the General Ledger Tab.
9. Select Vision Corporation UK as your Ledger.
10. Enter the following details for - Cash Account: (Corporate Accounting Flex)
Company - select 99 Vision Corporation
Department - 400 Sales
Account - select 2110 Payable to Bank Current.
Intercompany - 00 Default
11. Save your work.
12. Close the window.
Define a Direct Deposit Payment Method
13. Navigate to the Organizational Payment Method window:
(N) Payroll > Payment Methods
14. Set your effective date for this exercise to 01-JAN-2000.
15. Enter Direct Deposit xx as your payment method name.
16. Select BACS Tape as the payment method type.
17. Leave the Third Party Payment box unchecked.
18. Select United Kingdom as the Source Bank-Country.
19. Enter the following GB Bank Details:
Sort Code
Bank Name
Account Number
Account Name
Account Type
20. Enter the following Further Information:
BACS User Number
BACS Limit
21. Select Vision Corporation UK as your Ledger.
22. Enter the following details for GL Cash Account:
Company - select 99 Vision Corporation.
-
8/19/2019 Oracle Payroll Admin Guide
21/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 11
Department - select 400 as your department.
Account - select 2110 Payable to Bank Current.
Intercompany – 00 Default
23. Save your work.
Define a Third Party Payment Method
24. Navigate to the Organizational Payment Method window: (N) Payroll > Payment Methods
25. Set your effective date for this exercise to 01-JAN-2000.
26. Enter Third Party xx as your payment method name.
27. Select Cheque-United Kingdom as the payment method type.
28. Check the Third Party Payment box.
29. Select United Kingdom as the Source Bank-Country.
30. Enter the following GB Bank Details:
Sort Code
Bank Name
Account Number
Account Name
Bank Branch Location
31. Enter the following Further Information:
BACS User Number
BACS Limit
32. Select Vision Corporation UK as your Ledger.
33. Enter the following details for GL Cash Account:
Company - select 99 Vision Corporation.
Department - select 400 as your department.
Account - select 2110 Payable to Bank Current.
Intercompany – 00 Default
34. Save your work.
-
8/19/2019 Oracle Payroll Admin Guide
22/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 12
Practice - Defining Consolidation Sets
Overview
This practice reinforces your ability to create consolidation sets.
You should already have a consolidation set defined by the system. Review the consolidationset.
Assumptions• For this practice, log on to Vision as hrms/welcome and use the US Super HRMS
responsibility.
• Replace XX with your terminal number or initials.
• You must have access to an Oracle Application Vision database or comparable trainingor test instance at your site on which to complete this practice.
Tasks
Navigate to the relevant window
Navigate to the Consolidation Sets window.
Define a Consolidation Set
Review existing consolidation sets, and create a new consolidation set.
-
8/19/2019 Oracle Payroll Admin Guide
23/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 13
Solution: Defining Consolidation Sets
Define Consolidation Sets
1. Navigate to the Consolidation Sets window using US Super HRMS Manager responsibility:
(N) Payroll > Consolidation
2. Date Track to 01-JAN-20YY (YY= 2 years ago)
3. Perform Query Enter (F11)
4. Perform Query Run (Ctrl+F11)
Vision Corporation will be displayed.
5. In a new record, enter XX Semi Monthly Payrolls as the name of the Consolidation Set.
6. Save your work.
7. Close the form.
-
8/19/2019 Oracle Payroll Admin Guide
24/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 14
Practice: Defining a Payroll
Overview
In this practice you will define a monthly and weekly payroll as of 01-JAN-2000.
Assumptions•
You can use the OU HRMS Manager or OU Super HRMS Manager responsibility toperform this task. In this practice, we log in as ouhrms/welcome and use the OU HRMSManager responsibility.
• You must have access to an Oracle Application Vision database or comparable trainingor test instance at your site on which to complete this practice.
• Set your effective date to 01-JAN-2000.
• This practice covers only the required steps for performing this task.
• Replace xx with your initials or the unique group identifier provided by your instructor.
Tasks
Navigate to the relevant windowNavigate to the Payroll Description window.
Define a Monthly Payroll
Define a monthly payroll as of 01-JAN-2000 with the following attributes:
Name monthly_payroll_xx
Period Type Calendar MonthFirst Period End Date 31-JAN-2000
Number of Years 5
Date Offset Enter the following date offsets:
•
Normal Payment: 0 (default)• BACS Processing: -3
• Pay Advice: 0 (default)
• Cut Off: 0 (default)
Default Select the following:
• Payment Method: Cheque_xx
• Consolidation Set: EducationMonthly
Costing Enter the following:
• Company: 03 United Kingdom
• Cost Centre: 110 Vision Industries• Account: 5800 Salaries
• Project: 220 Software Suite
• Activity: 000 (default)Suspense Account Do not enter any details here, but note that
entry procedure is identical to the
procedure for completing the costing field.
-
8/19/2019 Oracle Payroll Admin Guide
25/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 15
Arrears Payroll Check this box if you want your payrollruns to allow an arrears payment.
Otherwise, leave this box unchecked.Negative Payment Allowed Check this box if you want your payroll
runs to allow a negative payment as a validresult. Otherwise, leave this box
unchecked.Statutory Information Enter the following:
• Employers PAYE Reference: 518/O168 (14 chars max)
• Unique ID : Enter a number (12chars max)
• ECON: 581/0162
• Maximum Holiday Paid Advance 0 (default)
• BACS Payment Rule: Previous
Banking Day
Define a Weekly Payroll
Define a weekly payroll as of 01-JAN-2000 with the following attributes:
Name weekly_payroll_xx
Period Type WeekFirst Period End Date 7-JAN-2000
Number of Years 5
Date Offset Enter the following date offsets:
• Normal Payment: 0 (default)
• BACS Processing: -3
• Pay Advice: 0 (default)• Cut Off: 0 (default)
Default Select the following:
• Payment Method: cheque_xx
• Consolidation Set: Education
WeeklyCosting Enter the following:
• Company: 03 United Kingdom
• Cost Centre: 110 Vision Industries
• Account: 5800 Salaries
• Project: 220 Software Suite
• Activity: 000 (default)Suspense Account Do not enter any details here, but note that
entry procedure is identical to the
procedure for completing the costing field. Arrears Payroll Check this box if you want your payroll
runs to allow an arrears payment.
Otherwise, leave this box unchecked.
-
8/19/2019 Oracle Payroll Admin Guide
26/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 16
Negative Payment Allowed Check this box if you want your payrollruns to allow a negative payment as a valid
result. Otherwise, leave this boxunchecked.
Statutory Information Enter the following:
• Employers PAYE Reference:
518/O168 (14 chars max)• Unique ID : Enter a number (12
chars max)
• ECON: 581/0162
• Maximum Holiday Paid Advance 0 (default)
• BACS Payment Rule: PreviousBanking Day
-
8/19/2019 Oracle Payroll Admin Guide
27/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 17
Solution: Defining a Payroll
Setting Up Payroll
Navigate to the relevant window
1. Navigate to the Payroll Description Window:
(N) Payroll > Description
2. Set your effective date for this exercise to 01-JAN-2000
Define a Monthly Payroll
3. Enter Monthly_Payroll_xx as your payroll name.
4. Select Calendar Month as the Period Type.
5. Enter a first period end date of 31-JAN-2000
6. Enter these date offsets:
Normal Payment – 0 (the default)
BACS Processing – enter –3
Pay Advice – 0 (the default)
Cut Off – 0 (the default)
7. Select Cheque xx as the default payment method for your payroll.
8. Select Education Monthly as the consolidation set.
9. Enter the following Costing information:
Company: 03 United Kingdom
Cost Centre: 110 Vision Industries
Account: 5800: Salaries
Project: 220 Software Suite
Activity: 00 (the default)
10. Do not enter any Suspense Account Information, but note that the procedure is identicalto the procedure for completing the costing information.
-
8/19/2019 Oracle Payroll Admin Guide
28/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 18
11. Check the Negative Payment Allowed box if you want your payroll runs to recognizenegative payments as valid. Otherwise, leave this box unchecked.
12. Enter this Statutory Information:
Employers PAYE Reference: 518/O168 (14 chars max)
Unique ID : Enter a number (12 chars max)
ECON: 581/0162
Maximum Holiday Paid Advance: 0 (default)
13. BACS Payment Rule: Previous Banking Day
14. Save your work
15. Choose the Valid Payment Methods button and add Direct Deposit_xx. (Cheque_xxshould already exist as the default payment method).
16. Save your work.
Define a Weekly Payroll
17. Navigate to the Payroll Description window:
(N) Payroll > Description
18. Set your effective date for this exercise to 01-JAN-2000
19. Enter the following details:
20. Enter Weekly_Payroll_xx as your payroll name.
21. Select Week as the Period Type.
22. Enter a first period end date of 7-JAN-2000
23. Enter these date offsets:
Normal Payment – 0 (the default)
BACS Processing – enter –3
Pay Advice – 0 (the default)
Cut Off – 0 (the default)
24. Select Cheque xx as the default payment method for your payroll.
-
8/19/2019 Oracle Payroll Admin Guide
29/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 19
25. Select Education Monthly as the consolidation set.
26. Enter the following Costing information:
Company: 03 United Kingdom
Cost Centre: 110 Vision Industries
Account: 5800: Salaries
Project: 220 Software Suite
Activity: 00 (the default)
27. Do not enter any Suspense Account Information, but note that the procedure is identicalto the procedure for completing the costing information.
28. Check the Negative Payment Allowed box if you want your payroll runs to recognizenegative payments as valid. Otherwise, leave this box unchecked.
29. Enter this Statutory Information:
Employers PAYE Reference: 518/O168 (14 chars max)
Unique ID : Enter a number (12 chars max)
ECON: 581/0162
Maximum Holiday Paid Advance: 0 (default)
BACS Payment Rule: Previous Banking Day
30. Save your work
31. Choose the Valid Payment Methods button and add Direct Deposit_xx. (Cheque_xxshould already exist as the default payment method).
32. Save your work.
-
8/19/2019 Oracle Payroll Admin Guide
30/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 20
-
8/19/2019 Oracle Payroll Admin Guide
31/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 21
Maintaining PAYE and NI (U.K. only)
-
8/19/2019 Oracle Payroll Admin Guide
32/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 22
Practice: Entering NI Details for a Company Director
Overview
Enter NI details for a company director.
Assumptions•
You can use the OU HRMS Manager or OU Super HRMS Manager responsibility toperform this task. In this practice, we log in as ouhrms/welcome and use the OU HRMSManager responsibility.
• You must have access to an Oracle Application Vision database or comparable trainingor test instance at your site on which to complete this practice.
• Set your effective date to 01-JAN-2000.
• This practice covers only the required steps for performing this task.
• Replace xx with your initials or the unique group identifier provided by your instructor.
Tasks
Navigate to the relevant windowNavigate to the Statutory Details window.
Enter NI details for a company director
Query a company director, Anthony David Ambrose xx and change his Process type to aDirector Process Type.
-
8/19/2019 Oracle Payroll Admin Guide
33/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 23
Solution: Entering NI Details for a Company Director
Navigate to the relevant window
1. Navigate to the Statutory Details window for Anthony David Ambrose xx:
(N) Fastpath > UK Tax > Statutory Details
Enter NI details for a company director
2. Choose NI Details (T).
3. Change your effective date, if required.
4. Select a Director process type for the employee. Oracle Payroll automatically performsthe correct NI calculation for whatever process type you select. Leavers’ choices areonly available when the employee is a leaver. There are thirteen choices altogether, butonly the following choices apply to company directors:
− Director
− Director Normal
− Director Pro-Rate
− Director Normal Pro Rate
− Pensioner Director
5. Save your work.
-
8/19/2019 Oracle Payroll Admin Guide
34/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 24
Practice: Entering PAYE Details for an Employee
Overview
Enter PAYE details for an employee.
Assumptions•
You can use the OU HRMS Manager or OU Super HRMS Manager responsibility toperform this task. In this practice, we log in as ouhrms/welcome and use the OU HRMSManager responsibility.
• You must have access to an Oracle Application Vision database or comparable trainingor test instance at your site on which to complete this practice.
• Set your effective date to 01-JAN-2000.
• This practice covers only the required steps for performing this task.
• Replace xx with your initials or the unique group identifier provided by your instructor.
Tasks
Navigate to the relevant windowNavigate to the Statutory Details window for Camilla Anderson xx.
Enter PAYE details for an employee
Amend the Tax code to 245L and the Tax basis to Cumulative.
-
8/19/2019 Oracle Payroll Admin Guide
35/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 25
Solution: Entering PAYE Details for an Employee
Navigate to the relevant window
1. Navigate to the Statutory Details window:
(N) People > Enter and Maintain > Assignment > Tax Information
Enter PAYE details for an employee
2. Query the employee Camilla Anderson xx in the Find window to open the Assignmentwindow.
3. Change your effective date if required.
4. Enter the employee’s new Tax code of 245L and amend the Tax basis to Cumulative.
5. Save your work.
-
8/19/2019 Oracle Payroll Admin Guide
36/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 26
Practice: Entering NI Details for an Employee
Overview
Enter NI details for an employee.
Assumptions•
You can use the OU HRMS Manager or OU Super HRMS Manager responsibility toperform this task. In this practice, we log in as ouhrms/welcome and use the OU HRMSManager responsibility.
• You must have access to an Oracle Application Vision database or comparable trainingor test instance at your site on which to complete this practice.
• Set your effective date to 01-JAN-2000.
• This practice covers only the required steps for performing this task.
• Replace xx with your initials or the unique group identifier provided by your instructor.
Tasks
Navigate to the relevant windowNavigate to the Statutory Details window.
Enter NI details for an employee
Query the employee Camilla Anderson xx and amend her NI category to G with a renewal dateof 12 months time for her certificate. Lastly, enter the Scheme Contracted Out Number (SCON)S2345678B.
-
8/19/2019 Oracle Payroll Admin Guide
37/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 27
Solution: Entering NI Details for an Employee
Navigate to the relevant window
1. Navigate to the Statutory Details window:
(N) Fastpath > UK Tax > (T) NI Details
Enter NI details for an employee
2. Query the employee Camilla Anderson xx in the Find window to open the StatutoryDetails window. You use the Statutory Details window to enter NI information.
3. Change your effective date, if required.
4. Amend the NI Category for Camilla Anderson xx to G.
5. In the certificate field, leave the default method of authentication for the employee’scategory.
6. Enter a renewal date for the certificate of 12 months time.
7. Oracle Payroll automatically validates the employee’s pension type as different rates ofNational Insurance apply to different types.
8. Enter the employee’s Scheme Contracted Out Number S2345678B if the employee is amember of a Contracted Out Money Purchase pension scheme (COMP). You can set upthe data for this field in the Lookup GB_SCON.
-
8/19/2019 Oracle Payroll Admin Guide
38/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 28
-
8/19/2019 Oracle Payroll Admin Guide
39/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 29
Maintaining Other Deductions (U.K. Only)
-
8/19/2019 Oracle Payroll Admin Guide
40/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 30
Practice: Maintaining Student Loans
Overview
Enter student loan information for an employee.
Assumptions•
You must have access to an Oracle Application Vision database or comparable trainingor test instance at your site on which to complete this practice.
• You must sign into the Oracle Application using hrms/welcome and use the SuperHRMS responsibility for your legislation.
• Seeded Vision Data.
• Use your initials if the practice requests an “xx”.
Tasks
Navigate to the Relevant Window
Navigate to the Element Entries window for an assignment.
Enter Student Loan Information
Add the Student Loan element to the elements entries and provide the necessary details.
-
8/19/2019 Oracle Payroll Admin Guide
41/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 31
Solution: Maintaining Student Loans
Navigate to the Relevant Window
1. Navigate to the Element Entries window:
(N) People > Enter & Maintain > Assignment > Entries > Element Entries
Enter Student Loan Information2. Add in the Student Loan element and enter a cost code, if applicable.
3. Click on Entry Values.
4. Enter the Start Date in the format DD-MON-YYYY.
5. Enter the End Date in the format DD-MON-YYYY.
6. Save your work.
-
8/19/2019 Oracle Payroll Admin Guide
42/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 32
Practice: Maintaining Tax Credits
Overview
Enter tax credit information for an employee.
Assumptions•
You must have access to an Oracle Application Vision database or comparable trainingor test instance at your site on which to complete this practice.
• You must sign into the Oracle Application and use the Super HRMS responsibility foryour legislation.
• Seeded Vision Data.
• Use your initials if the practice requests an “xx”.
Tasks
Navigate to the Relevant Window
Navigate to the Element Entries window.
Enter Tax Credit Information
Query an employee and enter their tax credit details.
-
8/19/2019 Oracle Payroll Admin Guide
43/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 33
Solution: Maintaining Tax Credits
Navigate to the Relevant Window
1. Navigate to the Element Entries window:
(N) People > Enter & Maintain > Assignment > Entries
Enter Tax Credit Information2. Select the Working Tax Credit element.
3. Enter the start date in the format DD-MON-YYYY.
4. Enter the daily rate.
5. Save your work.
-
8/19/2019 Oracle Payroll Admin Guide
44/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 34
-
8/19/2019 Oracle Payroll Admin Guide
45/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 35
Costing Overview
There are no Practices and Demonstrations in this Lesson.
-
8/19/2019 Oracle Payroll Admin Guide
46/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 36
Processing Costs
-
8/19/2019 Oracle Payroll Admin Guide
47/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 37
Guided Demonstration - Previewing Cost Allocations
Responsibility: local Super HRMS Manager
Log onto Vision using hrms/welcome.
1. Navigate to the People window.
(N) People > Enter and Maintain
2. Find the employee named Sabatino.
3. Click Assignment to go to the Assignment window.
4. Click Others and select View Cost Allocations. A window opens, displaying the costallocations for the selected employee.
5. To check the cost allocation values are a valid combination, select an element and clickValidate. A red cross appears against the element if the cost allocations are invalid.Otherwise, a green tick displays.
6. Select the Details icon for an element to view the specific costing details. The details alsoprovide further information on any errors, if any cost allocation value is invalid.
7. For a graphical representation of cost allocation for the employee, select the Graphical Analysis tab and select the Cost Allocation Key Flexfield segment you would like to view. Apie chart shows the cost distribution of the selected employee’s elements across thesegment values. The bar across the top of the chart provides the key to the colored piesegments.
8. Close the Cost Allocations preview window to return to the Assignment window.
-
8/19/2019 Oracle Payroll Admin Guide
48/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 38
Practice - Allocating Costs
Overview
The objective of this practice is to investigate the allocation of assignment costs for a specificemployee, by looking at the cost entry levels you would use during system setup.
You will also override the existing cost allocation values for a specific employee assignment.
Assumptions• For this practice, log in to Vision as hrms/welcome and use your local Super HRMS
responsibility.
• You must have access to an Oracle Application Vision database or comparable trainingor test instance at your site on which to complete this practice.
• Your course instructor will allocate you an employee to research and update.
Tasks
Investigate Default Cost Allocations
You want to find out how the costing of a selected employee’s salary is affected by the costallocations at Payroll, Element, and Organization levels. The following employees are paid aRegular Salary through the Vision HR Semi-Monthly payroll:
No. Employee Name Organization
604 Bullen, Mrs. Trisha US Sales Central
596 Finnegan, Mr. Jeremy US Sales Central
621 Johnson, Ms. Michelle US Sales Central
841 Jonathon, Mr. Gilbert US Sales Central
568 Kahn, Ms. Natalie US Sales Central
842 Menendez, Mr. Leticia US Sales Central
613 Peters, Mr. Stanley US Sales Central
614 Putin, Mr. Rosco US Sales Central
888 Shaffer, Ms. Heidi US Sales Central
844 Smithers, Ms. Kandi US Sales Central
597 Stojakovic, Ms. Petra US Sales Central
606 Tyson, Mr. Mark US Sales Central
601 Ashton, Mrs. Lisa US Sales East
575 Brady, Mrs. Jennifer Kathleen US Sales East
619 Bueller, Ms. Monica US Sales East
590 George, Mrs. Joan US Sales East
577 Gomez, David US Sales East
591 Hurrianko, Ms. Rhonda US Sales East
-
8/19/2019 Oracle Payroll Admin Guide
49/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 39
618 Jackson, Mr. Travis US Sales East
594 Law, Mr. Paul US Sales East
Your course instructor will allocate you an employee to investigate.
Investigate the cost allocations of the Regular Salary element, the Vision Semimonthly payroll,and your employee’s organization.
As a result of your investigations, answer the following questions: How are your employee’s costs distributed according to these cost settings?
Why is there no distribution set associated with the Regular Salary element?
Which costing levels can you use to override these settings?
Override Default Cost Allocations
Your employee’s role in the organization is undergoing temporary changes that require changesto how you allocate their salary costs.
At the Assignment level, the cost of your employee’s salary is not currently allocated to a costcenter. From the current date, you want to split the costs of your employee’s salary across twocost centers.
At Assignment level, add new cost allocations for your employee’s Regular Salary as follows: Allocate 80% to the Sales Central cost center (code 440) from today’s date to one month
from today.
Allocate 20% to the US Organization cost center (code 210) from today’s date to onemonth from today.
Note: Remember that distribution of costs across cost codes must add up to 100%.
You want to award your employee a bonus for the extra work they have been assigned. AtElement Entry level, add a Bonus element and allocate the cost of this element to the USOrganization cost center (code 210), and to the Illinois Labor Distribution (code 2106).
Which cost allocations is this Element Entry cost allocation overriding?
-
8/19/2019 Oracle Payroll Admin Guide
50/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 40
Solution - Allocating Costs
Investigate Default Cost Allocations
Responsibility = local Super HRMS Manager
1. Navigate to the Payroll window using the local Super HRMS Manager responsibility:
(N) Payroll > Description
2. In the Payroll window, enter query mode to search for Vision HR Semi-Monthly in the Namefield. Run the query.
3. Click in the Costing field to view the cost allocation segments for the Payroll entry level.
-
8/19/2019 Oracle Payroll Admin Guide
51/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 41
4. Note the cost allocation values entered at this level.
5. Close all windows to return to the Navigator. Do not save any changes.
6. Navigate to the Organization window using the local Super HRMS Manager responsibility:
(N) Work Structures > Organization > Description
7. Enter the name of your employee’s organization in the Name field of the Find Organizationwindow and choose Find to go to the Organization window.
8. Choose Others to view the Additional Organization Information.
-
8/19/2019 Oracle Payroll Admin Guide
52/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 42
9. Select Costing Information.
10. In the Additional Information window click in the Costing field to view the cost allocationsegments for the Organization entry level.
11. Note the cost allocation values entered at this level.
12. Close all windows to return to the Navigator. Do not save any changes.13. Navigate to the Element Link window using the local Super HRMS Manager responsibility:
(N) Total Compensation > Basic > Link
-
8/19/2019 Oracle Payroll Admin Guide
53/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 43
14. In the Element Link window, enter query mode to search for Regular Salary in the ElementName field. Run the query.
15. Note the value for Costable Type.
-
8/19/2019 Oracle Payroll Admin Guide
54/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 44
16. Click in the Costing field to view the cost allocation segments for the Element Link level.
17. Note the cost allocation values entered at this level.
18. Close all windows to return to the Navigator. Do not save any changes.
19. You should have learned the following in the course of your investigation:
The Payroll level distributes Mr. Sabatino’s costs to:
o Company: Operations
o Labor Distribution: General and Administrative
o Product: No Product
Neither the Element Link, nor the Organization levels override the Payroll level entries.None of these higher levels allocate costs to the Cost Center or the GL Code.
There is no distribution set associated with the Regular Salary element because theCostable Type is Fixed. Only Distributed costs require a distribution set.
You can use the Assignment and Element Entry levels to override these cost allocationsettings, but only for those segments that are enabled at those levels.
Override Default Cost Allocations
Responsibility = local Super HRMS Manager
20. To distribute the cost of your employee’s salary across two cost centers, navigate to the Assignment window.
(N) People > Enter and Maintain
21. Find your employee.
-
8/19/2019 Oracle Payroll Admin Guide
55/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 45
22. Navigate to the Costing window from the Assignment window.
(B) Assignment > Others > Costing
Note: Each line is datetracked and the total allocation of costs at any one time must be
100%.23. Enter 80 in the Proportion field for the existing record; tab to exit the field.
24. The Cost Allocation Flexfield window appears. Enter 440 (Sales Central) in the Cost Centerfield. Choose OK to return to the Costing window.
25. In a new record enter 20 in the Proportion field; tab to exit the field.
26. The Cost Allocation Flexfield window appears. Enter 210 (US Organization) in the CostCenter field. Choose OK to return to the Costing window.
-
8/19/2019 Oracle Payroll Admin Guide
56/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 46
27. Save your work. The Effect From dates automatically update to your effective date.
28. You have now distributed the cost of your employee’s salary across two cost centers. Closethe Costing window to return to the Assignment window.
29. To provide your employee with a bonus, choose the Entries button to go to the ElementEntries window.
30. Enter Bonus in the Element Name field of a new record.31. Click in the Costing field. The Cost Allocation Flexfield window for the Element Entry
appears. Here you can allocate costs for the Cost Center segment and the LaborDistribution segment.
-
8/19/2019 Oracle Payroll Admin Guide
57/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 47
32. Enter a value of 210 (US Organization) in the Cost Center field.
33. Enter a value of 2106 (Illinois) in the Labor Distribution field.
34. Choose OK, to return to the element Entries window.
35. Enter Merit in the Reason field.
36. Leave the default dates in the Effect Dates fields.
-
8/19/2019 Oracle Payroll Admin Guide
58/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 48
37. Save your work and close the window.
38. You have now awarded your employee a bonus and costed it.
39. The Payroll level costing allocates the Labor Distribution costs of employees on this payrollto General and Administrative. You have overridden the cost allocation set at Payroll level,to allocate the Labor Distribution costs of your employee’s bonus to Illinois.
40. No other entry levels allocate Cost Center costs, so in allocating the cost of your
employee’s bonus to the US Organization cost center, you have not overridden any existingcost entries.
-
8/19/2019 Oracle Payroll Admin Guide
59/60
Copyright © Oracle 2009. All rights reserved.
R12.x Payroll Fundamentals: Configuration Practices and Solutions
Chapter 1 - Page 49
-
8/19/2019 Oracle Payroll Admin Guide
60/60
Payroll Configuration - Summary
There are no Practices and Demonstrations in this Lesson.