orbiweld tp, the new generation of open-arc weld heads … · 2017-03-27 · open-arc weld heads...
TRANSCRIPT
Orbital Welding Equipment
FD
3.2
00
08.
05
ORBIWELD TP, the new Generation ofOpen-Arc Weld heads with unique Features.
With or without Cold-Wire-Feeding.
SCHWEISSTECHNIK
SCHWEISSTECHNIK
Specifications subject to change without notice
TP 600 with KD 3-100Wire Feeder
TP 250 with remote Wire Feeder KD 4
The new series of ORBIWELD TP Open Arc Weld Heads is available in 4 Sizes:
Model TP 250 for Tube/Pipe O.D. 20*- 77 mm
Model TP 400 for Tube/Pipe O.D. 30 - 115 mm
Model TP 600 for Tube/Pipe O.D. 70 - 170 mm
Model TP 1000 for Tube/Pipe O.D. 120 - 275 mm*Diameters as small as 10mm can be accommodated with diameter specific collets.
Description TP 250 TP 400 TP 600 TP 1000
A
B
C
D
E
F
Without wire
With wire KD 3- 62
With wire KD 3-100
Tungsten
86
X
X
85
74
125
108
155
X
120
90
200
146
176
196
120
97
202
216
216
237
160
146
270
Weight (kg)excluding cable and wire feeder 2,1 5,4 8,0 16,9
ORBIWELD TP Weights & Dimensions(All dimensions in mm)
X = Not available
ORBIMATIC GmbHFloesser Weg 17D-35418 Buseck/GermanyPhone +49 (0) 64 08 / 90 26-0Fax +49 (0) 64 08 / 90 26-50E-mail: [email protected]
ORBIMATIC (UK) Limited7 The Manor Grove Centre,Vicarage Farm RoadPeterborough PE1 5UHPhone +44 (0) 17 33 55 52 85Fax +44 (0) 17 33 55 58 31E-mail: [email protected]
Visit our Website under WWW.ORBIMATIC.COM or WWW.ORBIMATIC.CO.UK
Forget everything you know about Open-Arc-Weld Heads!
The all new ORBIWELD TP series are completely unique in design, making it very versatile.Locating the motor inside the main housing, results in the ORBIWELD TP series being very com-pact in design and the revolutionary design of the drive system makes large & bulky drive mechanisms a thing of the past.
The clamping mechanism and jaws move with a par-allel motion and results in a secure clamping of theweld head with a large clamping cross section. Theclamping range of the jaws can be infinitely adjustedthrough the diameter range of the head by rotationof a single knob.
All ORBIWELD TP weld heads are supplied withhardened steel clamp jaws which provide optimalclamping efficiency. Alternatively stainless steelclamp jaws can be supplied.
ORBIWELD TP weld heads can be easily clamped into position and are locked in position witha quick action lever mechanism. A build in remote control panel eliminates the need for a sepa-rate and additional remote control unit.
A swivelling TIG torch provides the capability for fillet welds orpulled-T joint
With the models TP 400/ 600 and 1000 the TIG torch is moun-ted on a precision slide to give precise, fine control of the elec-trode during welding.The wire tip can also be adjusted to ensure the wire is fed intothe centre of the weld pool.
An optional on-board wire feed unit is available for the ORBIWELD TP 400, 600 and 1000 weld heads.The wire feeder is located close to the welding torch whichensures a responsive wire feeding which is synchronisedwith the pulsing of the welding current.This gives much bet-ter control of the weld pool than systems which have to pushor pull the wire from a remote, separate wire feeder overlong distances, thus not allowing responsive precise syn-chronisation with the current pulses.For field applications the compact wire feeder on the weldhead is more comfortable than a separate, heavy wire fee-der.
KD 3-62 with Mini-spool for thehead models TP 400 / 600 / 1000
KD 3-100 with D 100 standard spoolfor head models TP 600 and 1000
The KD 3-62 is a wire feed unit which uses a special mini-spool to allow the ORBIWELD TP 400, 600 and 1000 weldheads to be used in low radial clearance applications.
The KD 3-100 wire feed unit is designed for use with theORBIWELD TP 600 or 1000 weld heads and is designed toaccommodate standard D100 wire spools.
KD 4 closed and with opencover
Because of the compact design of the ORBIWELD TP250 the KD 4, remote wire feed unit is used.The KD 4 ishoused in a robust ABS case which is supplied with ashoulder strap for easy and comfortable transportationfor the operator. The KD 4 has short Teflon liner whichguides the wire to the weld head with minimal back-lashfor trouble-free wire feeding.
The KD 4 wire feed units accommodates standard D100wire spools and weighs less than 2kg when no wire isloaded.