order cad/cam ti-base for cerec* digital workflow€¦ · full integration into sirona cerec* with...
TRANSCRIPT
![Page 1: Order CAD/CAM Ti-Base for CEREC* Digital Workflow€¦ · Full integration into Sirona CEREC* with ,,Camlog®** interface“ Order infOrmatiOn BONETRUST® PLUS IMPLANTS Scan-Caps](https://reader034.vdocuments.net/reader034/viewer/2022042418/5f347a3ed3808a743a72cde9/html5/thumbnails/1.jpg)
Medical Instinct® Deutschland GmbHGraseweg 24 37120 Bovenden, Germany Telefon: +49 55 93 . 9 51 96 Telefax: +49 55 93 . 9 51 95 www.medical-instinct.de
Full integration into Sirona CEREC* with ,,Camlog®** interface“
Order infOrmatiOn
BONETRUST® PLUS IMPLANTS ARTICLE-NO.:
CAD/CAM Ti-Base hex for Cerec*, 166-3034403.4/4.0 mm, with Screw
CAD/CAM Ti-Base hex for Cerec*, 166-3050005.0 mm, with Screw
BONETRUST® CONE+ IMPLANTS ARTICLE-NO.:
CAD/CAM Ti-Base cone+ for Cerec*, 266-3034403.4/4.0 mm, with Screw
CAD/CAM cone+ Cerec*, 5.0 mm 266-305000
The BoneTrust® Titanium Bases are only available from Medical Instinct®
Scan-Caps and Ceramic Blocks (Size ‘‘S‘‘) are availablefrom your dealer / dental depot.
Scanbody S for Bluecam (36 Pieces) - color white order number: 64 31 295
Scanbody S for Omnicam(36 Pieces) - color gray
order number: 64 31 311
*Cerec is a registered trademark of Sirona Dental GmbH **Camlog® is a registered trademark of Camlog AG
CAD/CAM Ti-Base for CEREC*Digital Workflow
Always use Blocks Size ‘‘S‘‘
![Page 2: Order CAD/CAM Ti-Base for CEREC* Digital Workflow€¦ · Full integration into Sirona CEREC* with ,,Camlog®** interface“ Order infOrmatiOn BONETRUST® PLUS IMPLANTS Scan-Caps](https://reader034.vdocuments.net/reader034/viewer/2022042418/5f347a3ed3808a743a72cde9/html5/thumbnails/2.jpg)
CEREC*Digital WorkfloW for MeDical instinct® ti-base
+ Administration+ Define restoration+ Abutment
+ Scanbodytyp TiBase + Choose Camlog®
- Camlog® 3.8 mm for Medical Instinct® Ti-Base 3.4/4.0 mm- Camlog® 4.3 mm for Medical Instinct® Ti-Base 5.0 mm
+ Scan Plaster model or intra-oral- Use Scanbody S for Bluecam (64 31 295) - Use Scanbody for Omnicam (64 31 311) (Scanbodys are available from your dealer / dental depot)
+ Abutment Design
+ Material selection- Sirona inCoris ZI meso- Ivoclar Vivadent IPS e.max- Always use blocks Size ‘‘S‘‘
+ Milling Abutment