ordering guide fist-gco2

FIST-GCO2 Ordering guide PM Pieter De Coster

of 31 Issue 2.4 03-2008

Ordering Guide of the Generic Closure Organizer (FIST-GCO2)

This document provides assistance with the selection of FIST Generic Closure Organizers (FIST-GCO2) for use in FIST applications. It includes the following sections: 1 Product description 2

2 Ordering information 3

2.1 How to order this product 3 2.2 Closure name string 3 2.3 Accessories 4 2.4 Installation tools 7

3 Product guide 8

3.1 Closure description 8 3.2 Closure dimensions 11 3.3 Closure capacity 13 3.4 Accessories 14 3.5 Tools 24 3.6 Standard application kits 26


of 31 Issue 2.4 03-2008

1 Product description

The generic closure FIST-GCO2 is the environmentally sealed enclosure for the fiber management system that provides the functions of splicing and passive component integration in the external network. The product can be tailored to almost any required configuration by adding splicing and/or passive device sub-assemblies. The FIST-GCO2 has provision for all cable termination and sealing requirements.

UMS profile

uncut loose buffer tube storage area

modular wraparound groove plates

Organizer trays

FAS block (Fiber Arrangement System)

Tube holder assembly

base

The closure is a single-ended design made of a thermoplastic material. The base and dome are sealed with a clamp (or latches) and an O-ring system. One oval entry port for looped (uncut) cable and 6 or 16 round ports for single cable entry/exit are provided in the base. (8 round or 6 + 1 oval port for GCO2-FX version) The cable seals are manufactured from heat-shrinkable material. The UMS (Universal Mounting System) profiles provide the foundation for mounting combinations of SOSA2 (Splicing Only Sub-Assembly) and/or SASA2 (Splitter Array Sub-Assembly) modules, which consist of a modular groove plate and trays. Uncut loose buffer tube storage space is available between (or behind) the (two) UMS profile(s); for central core applications, storage baskets are available (for GCO2-BX only)


of 31 Issue 2.4 03-2008

2 Ordering information

2.1 How to order this product

Order one of the application kits Some application kits have been identified for an easy product selection and ordering. These kits contain all necessary accessories for a certain application and fiber count. Available for GCO2-BX6 only. The information can be found in paragraph 3.6. Order the closure and its accessories separately For maximum flexibility, the closure and the accessories can be ordered as separate items. The information can be found in paragraphs 2.2 and 2.3. This is recommended when: − other splice / fiber capacities are required − the required configuration is not covered by the application kits (e.g. ANT splice holders,....) − ribbon fiber is used − when the cable configuration is not loose tube or central core − a mix of cable configurations (e.g. single fiber and Ribbon8) has to be spliced in the same

closure − other quantities and types of cable seal kits are necessary − an extension of an application kit or installed closure is needed 2.2 Closure name string

Refer to section 3.0 for full product descriptions.

FIST-GCO2-XX X-X X

Flash test pointClosure type

BC 488 mm long with two 28 units UMSBD 566 mm long with two 42 units UMSBE 700 mm long with two 58 units UMS

FC 384 mm long with 16 units UMSFD 432 mm long with 24 units UMS

Ground feed-through

G Pre-mounted ground feed-throughN No ground feed-through

V Pre-mounted flash test point in domeN No flash test valve

Number of round ports

6 6 ports with max cable ∅ 30 mm

16 8 ports with max. cable ∅ 13.5 mm and8 ports with max. cable ∅ 20 mm (BX only)

8 8 ports with max cable ∅ 30 mm (FC and FD only)

FIST-GCO2-XX X-X X

Flash test pointClosure type

BC 488 mm long with two 28 units UMSBD 566 mm long with two 42 units UMSBE 700 mm long with two 58 units UMS

FC 384 mm long with 16 units UMSFD 432 mm long with 24 units UMS

Ground feed-through

G Pre-mounted ground feed-throughN No ground feed-through

V Pre-mounted flash test point in domeN No flash test valve

Number of round ports

6 6 ports with max cable ∅ 30 mm

16 8 ports with max. cable ∅ 13.5 mm and8 ports with max. cable ∅ 20 mm (BX only)

8 8 ports with max cable ∅ 30 mm (FC and FD only)

Standard kit content ( ): for FC and FD size − Base − 2 (1) UMS profiles; height depending on closure size − Dome − Clamp (latches) − O-ring − 2x (1x) FAS block (including 2 tube holders each, cap and wedge) - pre-installed − 2x (1x)Velcro − 2x (1x) traylid (including fiber guiding pin) − Silica gel − Allen key − Installation Instructions


of 31 Issue 2.4 03-2008

2.3 Accessories

Cable seal kits for oval port

Organizer trays + wraparound groove plates

Cable seal kits for round port

Uncut fiber storage basket

2.3.1 Cable seal kits for the oval port

Name Qty/Pk Description for BX for FX

FIST-GCO2-OSK-LTS 1 pc Oval port seal kit for single fiber loose tube cable X X FIST-GCO2-OSK-LTR 1 pc Oval port seal kit for loose tube ribbon cable X X FIST-GCO2-OSK-CC 1 pc Oval port seal kit for central core cable

(both single fiber and ribbon) X X

FOSC-CSEAL-2NW 1 pc Wraparound cable seal sleeve for use on any oval port (repair or re-entry).

X X

FIST-GCO2-OSKG-ST/JF

1 pc Oval port gel seal kit for single fiber loose tube cable cable Ø 6 - 18 mm, with strength member and jacket fixation (*)

X -

FIST-GCO2-FX-OSKG- ST/JF

1 pc Oval port gel seal kit for single fiber loose tube cable cable Ø 6 - 18 mm, with strength member and jacket fixation (*)

- X

2.3.2 Cable seal kits for the round ports (6 or 8 round-port-base: port Ø 30mm)


FIST-GCO2-RSK-LTS 1 pc Round port seal kit for single fiber loose tube cable X X FIST-GCO2-RSK-LTR 1 pc Round port seal kit for loose tube ribbon cable X X FIST-GCO2-RSK-CC 1 pc Round port seal kit for central core cable (both single

fiber and ribbon) X -

FOSC-CSEAL-1NW 1 pc Wraparound cable seal sleeve for use on any round port (repair or re-entry).

X X

FIST-GCO2-MULTI2/9 1 pc Multi drop cable kit for 1 cable (max. 14 mm) and 2 tubes (max. cable Ø 9.5 mm) (only for single fiber – loose tube)

X -

FIST-GCO2-MULTI2/11 1 pc Multi drop cable kit for 1 cable (max. 14 mm) and 2 tubes (max. cable Ø 11.5 mm) (only for single fiber – loose tube)

X -

FIST-GCO2-MULTI2/12 1 pc Multi drop cable kit for 1 cable (max. 12 mm) and 2 tubes (max. cable Ø 12 mm) (only for single fiber – loose tube)

X -

FIST-GCO2-MULTI3/9 1 pc Multi drop cable kit with 3 tubes (max. cable Ø 9.5 mm) (only for single fiber – loose tube)

X -

FIST-GCO2-MULTI3/11 1 pc Multi drop cable kit with 3 tubes (max. cable Ø 11.5 mm) (only for single fiber - loose tube)

X -

FIST-GCO2-MULTI-SEAL 1 pc Cable seal to seal the cable onto the tube X -


of 31 Issue 2.4 03-2008


(only for single fiber - loose tube) FIST-GCO2-MULTI-UCT 1 pc Multi termination plate with 3 strength member fixations

to be used with the MULTI3 kits (only for single fiber - loose tube)

X -

FIST-GCO2-MULTI2/12-INST 1 pc Tool to install the FIST-GCO2-MULTI2/12 kit

X -

FIST-GCO2-RSKG-4-NS 1 pc Round port multi cable gel seal kit 4 x (4 to 7) mm (*) X X

FIST-GCO2-RSKG-4-ST 1 pc Round port multi cable gel seal kit 4 x (4 to 7) mm, with strength member fixation (*)

X -

FIST-GCO2-RSKG-4-JF 1 pc Round port multi cable gel seal kit 4 x (4 to 7) mm, with jacket fixation (*)

X -

FIST-GCO2-FX-RSKG-4-ST 1 pc Round port multi cable gel seal kit 4 x (4 to 7) mm, with strength member fixation (*)

- X

FIST-GCO2-FX-RSKG-4-JF 1 pc Round port multi cable gel seal kit 4 x (4 to 7) mm, with jacket fixation (*)

- X

FIST-GCO2-RSKG-8-NS 1 pc Round port multi cable gel seal kit 8 x (3 to 5) mm (*) X X

FIST-GCO2-RSKG-8-JF 1 pc Round port multi cable gel seal kit 8 x (3 to 5) mm, with jacket fixation (*)

X -

FIST-GCO2-FX-RSKG-8-JF 1 pc Round port multi cable gel seal kit 8 x (3 to 5) mm, with jacket fixation (*)

- X

FIST-GCO2-RSKG-16-NS 1 pc Round port multi cable gel seal kit 16 x max 2.8mm (*) X X

FIST-GCO2-RSKG-16-ST 1 pc Round port multi cable gel seal kit 16 x max 2.8mm, with Kevlar Termination Unit (*)

X -

FIST-GCO2-FX-RSKG-16-ST 1 pc Round port multi cable gel seal kit 16 x max 2.8mm, with Kevlar Termination Unit (*)

- X

2.3.3 Cable seal kits for the round port (16-round-port-base: port Ø 13.5 or 20mm)


FIST-GCO2-RSK-16-LTS 1 pc Round port seal kit for loose tube cable (single fiber or ribbon)

X -

FIST-GCO2-RSK-16-CC 1 pc Round port seal kit for central core cable (single fiber or ribbon)

X -

FOSC-CSEAL-1NW 1 pc Wraparound cable seal sleeve for use on any round port (repair or re-entry).

X -

2.3.4 Cable termination accessories


FACC-UCT-10 10 pc Strength member fixation kit X X FIST-CU-TERM8 1 pc 8 Cu pair termination disconnect module X -

(*) Seals only to 2m waterhead and 20kPa (according RUD 5391 for cold mini gelseals)


of 31 Issue 2.4 03-2008

2.3.5 Mounting kits & work stands

Consult the MOBRA ordering guide for a schematic overview.


FIST-MOUNTING-KIT 1 pc Pole/wall mounting kit for FIST-GCO2-BC6 (does not fit on other sizes)

X -

FIST-UNI-MOUNT-W 1 pc Wall mounting kit (dome fixation) X - FIST-MOBRA4-FIX 1 pc Wall mounting kit for 6-round-port-base (fits on all sizes)

(base support) X -

FIST-MOBRA-16-FIX 1 pc Wall mounting kit for 16-round-port-base (fits on all sizes) (base support)

X -

FIST-WORK-STAND 1 pc Closure installation stand X - FIST-WORKSTAND-H 1 pc Hingeable closure installation stand (for 6-round-port-base) X - FIST-WORKSTAND-16-H 1 pc Closure installation stand (for 16-round-port-base) X -

FIST-WORKSTAND-FX 1 pc Closure installation stand - X

FIST-GCO2-BX6-EXT/CF 1 pc External cable fixation bracket for GCO2-BX X -

FIST-GCOG-L-BRACKET 1 pc Wall mounting bracket for GCO2-BX X -

FIST-GCOG-WALL-KIT 1 pc Wall mounting set for GCO2-BX X -

FIST-GCO2-FX6-EXT/CF 1 pc External cable fixation bracket for GCO2-FX - X

2.3.6 Organizer trays

See the FIST-SOSA2 ordering guide. 2.3.7 Storage baskets


FIST-BASKET-A 1 pc Storage basket for uncut fibers of a loose tube ribbon or central core cable (size BC)

X -

FIST-BASKET-B 1 pc Storage basket for uncut fibers of a loose tube ribbon or central core cable (size BD and BE)

X -

2.3.8 Installation kit components


FISTV-E7185-3010-S5027 50 m Cutting wire to open the GCO ports X X FISTV-E7100-1005-S5027 10x

100 g Silicagel for inside the closure, to be replaced after each re-entry

X X


of 31 Issue 2.4 03-2008

2.4 Installation tools


FISTV-LCIT 1 pc Looped tube insertion tool for oval outlet (loose tube cable)

X X

FACC-HEAT-GUN-220V 1 pc 1460W, hot air gun to shrink the cable seals X X FACC-HEAT-GUN-110V 1 pc 1460W, hot air gun to shrink the cable seals X X FACC-HEAT-GUN-TIP-01 1 pc Nozzle for heat gun with side outlet (recommended to

install seals on 16-port-base) X X

FACC-S-HOT-AIR-TORCH 1 pc Flameless gas torch that can be used instead of a heat gun

X X

FACC-AXIAL-STRIPPER-01 1 pc Loop tube stripper X X FACC-AXIAL-STRIPPER-01-SP 1 pc Spare knifes for Axial stripper X X FACC-TUBE-STRIPPER-02 1 pc Tube stripper OPTI-STRIP X X FACC-TUBE-STRIPPER-02-SP 1 pc Spare knifes for Tube stripper X X FACC-AXIAL-STRIPPER-RC1 1 pc Raucut 1 tooling (REHAU) X X FACC-AXIAL-STRIPPER-RC16 1 pc Raucut additional insert for 1.6mm cable X X


of 31 Issue 2.4 03-2008

3 Product guide

3.1 Closure description

GC2OG010.JPG 7P2P1752.JPG

Dome The dome is made from a polymer, ribbed for extra strength.

GCOCAT09.JPG

7N3K0142.JPG

7P2P4591.JPG

7P2P4591.JPG

Base The base provides the foundation for the UMS profiles. Six or sixteen round and one oval port for cable entry/exit are provided in the base.


of 31 Issue 2.4 03-2008

GC2OG009.JPG

Dome to base seal This seal consists of a mechanical clamp and a rubber O-ring.

GC2OG002.JPG

UMS (Universal Mounting System) profiles On the 2 (1) UMS profiles, the wraparound groove plates can be clicked. The capacity of the UMS profile is defined by the closure size. Groove plates are available for single fiber, R4/8 and R12 and in different sizes. See SOSA2 ordering guide for more details.

GC2OG003.JPG

FAS block The window between the two FAS blocks is used to route fibers from one side of the FAS block to the other (for –BX size only). Tube holders mounted on each side of the FAS block hold the loose tubes or spiral tubes in position.

GCO2OG29.JPG

FAS block cap A FAS cap protects mechanically the fibers on the FAS block. Provision has been made to store the tray wedge.

GC2OG004.JPG

Tube holder On every side of the FAS block, tube holders are provided to keep tubes coming from the cables in place. Twelve cavities provide a neat organization of the tubes. The total capacity depends on the tube diameter (see paragraph 3.3.1).


of 31 Issue 2.4 03-2008

GCO2OG28.JPG

Retainers for tube holders The retainers have to be slid into the tube holders. They are delivered in a set of 12. Spare retainers can be stored on the tray lid.

GC2OG005.JPG

Expressed fiber storage area The area between the UMS profiles is used to store uncut loose buffer tubes (for –BX size only). The looped cable is fed through the oval port. For central core cable, storage baskets provide the necessary protection of the fibers (for –BX size only).

GC2OG006.JPG

Loose tube drop cable strength member fixation point The central strength member of each individual cable can be attached at this point.

GCOCAT09.JPG

Ground feed-through (optional) A sealed grounding feed-through bolt can be pre-mounted in the base to connect metallic components to an external ground.

GCOCAT10.JPG

Flash test valve (optional) This is pre-mounted in the dome if pressure access is required.


of 31 Issue 2.4 03-2008

3.2 Closure dimensions

3.2.1 GCO2-BX version

4 31

Key 1. Dome 2. Base sealing ring 3. Base 4.UMS profile

2

L

A

C

D

B*B**

A

B

D

C

Closure type Dimensions in mm BC BD BE

L 488 566 700 A 30 30 30 B (B**/B*) 30 (20/13.5) 30 (20/13.5) 30 (20/13.5) C 82 82 82 D 247 247 247 D with clamp 285 285 285


of 31 Issue 2.4 03-2008

3.2.2 GCO2-FX version

Key 1. Dome 2. Base 3. Dome/Base sealing ring 4. Optional valve 5. Latches

Closure type Dimensions in mm FC FD

L 384 432 W 279 279 W1 254 254 W2 150 150 A 30 30 B 82 82 C 30 30 D 195 195 E 123 123 F 256 256


of 31 Issue 2.4 03-2008

3.3 Closure capacity

3.3.1 General

Closure type BC BD BE

UMS profile data UMS profile length (units) (1) 2 x 28 2 x 42 2 x 58 FAS Block data Number of tube holders 4 4 4 Cavities per tube holder 12 12 12 Capacity per tube holder - FOPT-SF (1.8 mm) - tubes of 2.2 mm - tubes of 2.9 mm - tubes of 3.1 mm - tubes of 5.0 mm - Spiral tube of 6.8 mm - Spiral tube of 8.8 mm

48 48 36 24 12 6 3

48 48 36 24 12 6 3

48 48 36 24 12 6 3

Maximum number of fibers through the window in between the 2 FAS plates(2)

- Single fiber - R4 - R8 - R12

1000 120 64 48

1000 120 64 48

1000 120 64 48

Cable looping capacity Single fiber loose tube (3.1 mm ∅)

7 tubes (3.6 m) 10 tubes (3.8 m) 11 tubes (4 m)

Stored in basket - R4 (ribbons) - R8 (ribbons) - R12 (ribbons)

25 + (5.3m) 15 + (5.3m) 12 + (5.3m)

25 + (5.9m) 24 + (5.9m) 12 + (5.9m)

25 + (6.1m) 24 + (6.1m) 12 + (6.1m)

Cable port capacity (3) − one oval port for 2 cables Max. 2x25 mm

Min. 2x12 mm Max. 2x25 mm Min. 2x12 mm

Max. 2x25 mm Min. 2x12 mm

− 6 round port base: six round ports (1 cable each)

Max. 30 mm(4)

Min. 5 mm

Max. 30 mm(4)

Min. 5 mm

Max. 30 mm(4)

Min. 5 mm − 16 round ports (1 cable per port)

of which 8 ports: of which 8 ports:

Max. 13.5 mm Min. 5 mm Max. 20 mm Min. 5 mm



(1) The number indicated is the space that can be occupied by trays. A Single circuit tray

occupies 1 unit; a Single Element or R4/8 tray occupies 2 units; a R12 tray needs 3 units. One UMS profile length unit equals 6 mm.

(2) Fibers must be evenly spread (entering both from left and right). (3) Both oval and round ports can accommodate multiple cables per port subject to cable types

and dimensions. (4) Limited to 25 mm when a cable fixation bracket is used (included in the FIST-GCO2-RSK-

CC).


of 31 Issue 2.4 03-2008

3.3.2 Splicing cable to cable - primary coated fibers

Loose tube - central core cable – GCO2-BX type Closure type BC BD BE Fibers Trays Fibers Trays Fibers Trays

Single circuit splicing capacity − 2 primary coated fibers - SC 112 56 160 80 224 112 Single element splicing capacity − 8 primary coated fibers - SE tray − 12 primary coated fibers - SE tray

224 336

28 28

320 480

40 40

448 672

56 56

Ribbon fiber splicing capacity − R4 cable - 2xR4 per tray − R8 cable - R8 tray − R12 cable - R12 tray

224 224 192

28 28 16

336 336 336

42 42 28

464 464 432

58 58 36

Note Capacities indicated above are applicable for heat-shrinkable, ANT and RECORD

splice protectors. Loose tube - central core cable – GCO2-FX type Closure type FC FD Fibers Trays Fibers Trays

Single circuit splicing capacity − 2 primary coated fibers - SC 32 16 48 24 Single element splicing capacity − 8 primary coated fibers - SE tray − 12 primary coated fibers - SE tray

64 96

8 8

96 144

12 12

3.4 Accessories

The following accessories are ordered separately for field installation. See section 2.4 to check compatibility with the closure size (-BX or -FX) 3.4.1 Cable seal kits for the oval port

GCO2OG16.JPG

Oval port seal kit for single fiber loose tube cable FIST-GCO2-OSK-LTS Cable seal kit to seal two cables having a diameter range of 12-25 mm through the oval outlet port (numbered 1-2) of the FIST-GCO2. Includes a plastic sleeve to store the uncut loose buffer tubes between the 2 UMS profiles.


of 31 Issue 2.4 03-2008

GCO2OG20.JPG

Oval port seal kit for loose tube ribbon fiber cable FIST-GCO2-OSK-LTR Cable seal kit to seal two cables having a diameter range of 12-25 mm through the oval outlet port (numbered 1-2) of the FIST-GCO2.

GCO2OG17.JPG

Oval port seal kit for central core cable FIST-GCO2-OSK-CC Cable seal kit to seal two cables having a diameter range of 12-25 mm through the oval outlet port (numbered 1-2) of the FIST-GCO2. Includes a metal bracket to terminate the two central core cables.

SEA013.JPG

Wraparound cable seal kit for oval ports FOSC-CSEAL-2NW A wraparound sleeve for an oval port that can be used in case of re-entry/repair.

7P2P3246.JPG

Oval port gel seal kit for single fiber loose tube cable FIST-GCO2-OSKG-ST/JF Cable seal kit to seal two cables having a diameter range of 6-18 mm through the oval outlet port (numbered 1-2) of the FIST-GCO2-BX. Includes strenght member fixation and plastic sleeves to store the uncut loose buffer tubes between the UMS profiles. (*)

7P2P3247.JPG

Oval port gel seal kit for single fiber loose tube cable FIST-GCO2-FX-OSKG-ST/JF Cable seal kit to seal two cables having a diameter range of 6-18 mm through the oval outlet port (numbered 1-2) of the FIST-GCO2-FX. Includes strenght member fixation. (*)

(*) Seals only to 2m waterhead and 20kPa (according RUD 5391 for cold mini gelseals


of 31 Issue 2.4 03-2008

3.4.2 Cable seal kits for the round port (6 or 8 round-port-base: port Ø 30mm)

See section 2.4 to check compatibility with the closure size (-BX or -FX) Single cable kits can be used when only one cable has to be terminated per drop port. Depending on cable construction, the following types can be ordered:

GCO2OG18.JPG

Round port seal kit for single fiber loose tube FIST-GCO2-RSK-LTS Cable seal kit to seal cables with a diameter range of 5-30 mm through the round ports (numbered 3-8) of the FIST-GCO2. Includes a universal strength member termination kit.

GCO2OG21.JPG

Round port seal kit for loose tube ribbon FIST-GCO2-RSK-LTR Cable seal kit to seal cables with a diameter range of 5-30 mm through the round ports (numbered 3-8) of the FIST-GCO2. Includes a universal strength member termination kit and spiral tubing.

GCO2OG19.JPG

Round port seal kit for central core FIST-GCO2-RSK-CC Cable seal kit to seal cables with a diameter range of 5-25 mm through the round ports (numbered 3-8) of the FIST-GCO2. Includes a metal cable fixation bracket and spiral tube to terminate the central core cable.

SEA012.JPG

Wraparound cable seal kit for round ports FOSC-CSEAL-1NW A wraparound sleeve for a round port that can be used in case of re-entry/repair.


of 31 Issue 2.4 03-2008

GCO2OG22.JPG

Multi drop cable kits allow to feed more than 1 cable through the round port in a flexible way. In case that one cable is installed day one of the installation and further flexibility is needed to bring in 2 extra cables later on, the MULTI2-kits can be used. In a first stage, the cable is sealed together with 2 tubes; at a later stage, additional cable can be fed through these tubes. When full flexibility is needed and no cables are installed on day one, the MULTI3-kits can be used. Note that these kits are only applicable for single fiber-loose tube cable. For more information on multi-kits, please refer to addendum 1.

FIST-GCO2-MULTI2/9 - Multi drop cable kit Multi drop cable kit for 1 cable and 2 tubes. Multi termination plate with one strength termination is included. Max. cable diameter for the first cable=14 mm; other cable (through tubes) can have a max. diameter of 9.5 mm. Includes a multi-termination plate with one strength member fixation.

FIST-GCO2-MULTI2/11 - Multi drop cable kit Multi drop cable kit for 1 cable and 2 tubes. Multi termination plate with one strength termination is included. Max. cable diameter for the first cable=14 mm; other cable (through tubes) can have a max. diameter of 11.5 mm. Includes a multi-termination plate with one strength member fixation.

FIST-GCO2-MULTI2/12 - Multi drop cable kit Multi drop cable kit for 1 cable and 2 tubes. Multi termination plate with one strength termination is included. Max. cable diameter for the first cable=12 mm; other cable (through tubes) can have a max. diameter of 12 mm. Includes a multi-termination plate with one strength member fixation.

FIST-GCO2-MULTI3/9 - Multi drop cable kit Multi drop cable kit with 3 tubes. Max. cable dia. = 9.5 mm. FIST-GCO2-MULTI3/11 - Multi drop cable kit Multi drop cable kit with 3 tubes. Max. cable dia. = 11.5 mm.

GCO2OG23.JPG

FIST-GCO2-MULTI-SEAL Cable seal kit to seal the cable onto the tube. Only for single fiber-loose tube cable.

GCO2OG25.JPG

Multi strength member fixation kit FIST-GCO2-MULTI-UCT Multi termination plate with 3 strength member fixations to be used with the MULTI3 kits. Only for single fiber-loose tube cable.

GCO2OG24.JPG

Multi drop cable kit install tool FIST-GCO2-MULTI2/12-INST Tool to install the FIST-GCO2-MULTI2/12 kit For more information on multi-kits, please refer to addendum 1.


of 31 Issue 2.4 03-2008

7P2P0154.JPG.JPG

Round port multi cable gel seal kit FIST-GCO2-RSKG-4-NS Multi (4x) drop cable kit, cable Ø= 4 to 7 mm. No strength member fixation. Includes 4 dummy rods. Fits on round port Ø 30mm. (*)

7P2P0154.JPG.JPG 7N759724.JPG

Round port multi cable gel seal kit FIST-GCO2-RSKG-4-ST Multi (4x) drop cable kit, cable Ø = 4 to 7 mm. With strength member fixation. Includes 4 dummy rods + strength member fixation Fits on round port Ø 30mm of FIST-GCO2-BX6. (*)

7N759916.JPG

Round port multi cable gel seal kit FIST-GCO2-RSKG-4-JF Multi (4x) drop cable kit, cable Ø = 4 to 7 mm. With cable jacket fixation. Includes 4 dummy rods, 1 cable fixation block, adhesive foam. Fits on round port Ø 30mm of FIST-GCO2-BX. (*)

7P2P3279.JPG

Round port multi cable gel seal kit FIST-GCO2-FX-RSKG-4-ST Multi (4x) drop cable kit, cable Ø = 4 to 7 mm. With strength member fixation. Includes 4 dummy rods+ strength member fixation Fits on round port of FIST-GCO2-FX. (*)

7P2P2609.JPG

Round port multi cable gel seal kit FIST-GCO2-FX-RSKG-4-JF Multi (4x) drop cable kit, cable Ø = 4 to 7 mm. With cable jacket fixation. Includes 4 dummy rods, 1 cable fixation block, adhesive foam. Fits on round port of FIST-GCO2-FX. (*)

(*) Seals only to 2m waterhead and 20kPa (according RUD 5391 for cold mini gelseals)


of 31 Issue 2.4 03-2008

7P2P1570.JPG

Round port multi cable gel seal kit FIST-GCO2-RSKG-8-NS Multi (8x) drop cable kit, cable Ø= 3 to 5 mm. No strength member fixation. Includes 8 dummy rods. Fits on round port Ø 30mm of FIST-GCO2-BX6 or FIST-GCO2-FX (*)

7P2P1570C.JPG

Round port multi cable gel seal kit FIST-GCO2-RSKG-8-JF Multi (8x) drop cable kit, cable Ø = 3 to 5 mm. With cable jacket fixation. Includes 8 dummy rods, 1 bracket, adhesive foam. Fits on round port Ø 30mm of FIST-GCO2-BX6. (*)

7P2P1571.JPG

Round port multi cable gel seal kit FIST-GCO2-FX-RSKG-8-JF Multi (8x) drop cable kit, cable Ø = 3 to 5 mm. With cable jacket fixation. Includes 8 dummy rods, 1 bracket, adhesive foam. Fits on round port of FIST-GCO2-FX. (*)

7N759917B.JPG

Round port multi cable gel seal kit FIST-GCO2-RSKG-16-NS Multi (16x) drop cable kit, cable Ø = max 2.8 mm. No strength member fixation. Includes 16 dummy rods. Fits on round port Ø 30mm of FIST-GCO2-BX6 or FIST-GCO2-FX (*)

7N759917.JPG

Round port multi cable gel seal kit FIST-GCO2-RSKG-16-ST Multi (16x) drop cable kit, cable Ø = max 2.8 mm. No strength member fixation. Includes 16 dummy rods, 16 KTUs (Kevlar Termination Unit) + 1 KTU bracket Fits on round port Ø 30mm of FIST-GCO2-BX. (*)

(*) Seals only to 2m waterhead and 20kPa (according RUD 5391 for cold mini gelseals


of 31 Issue 2.4 03-2008

7P2P2610.JPG

Round port multi cable gel seal kit FIST-GCO2-FX-RSKG-16-ST Multi (16x) drop cable kit, cable Ø = max 2.8 mm. No strength member fixation. Includes 16 dummy rods, 16 KTUs (Kevlar Termination Unit) + 1 KTU bracket Fits on round port of FIST-GCO2-FX. (*)

3.4.3 Cable seal kits for the round port (16-round-port-base: port Ø 13.5 or 20mm)

See section 2.4 to check compatibility with the closure size (-BX or -FX)

GCO2OG18.JPG

Round port seal kit for loose tube cable FIST-GCO2-RSK-16-LTS Cable seal kit to seal cables with a diameter range of 5-20 mm through the round ports (numbered 3-16) of the FIST-GCO2. It includes a universal strength member termination kit.

Round port seal kit for central core cable FIST-GCO2-RSK-16-CC Cable seal kit to seal cables with a diameter range of 5-20 mm through the round ports (numbered 3-16) of the FIST-GCO2. It includes a dual strength member termination kit and spiral tubing.

SEA012.JPG

Wraparound cable seal kit for round ports FOSC-CSEAL-1NW A wraparound sleeve for a round port that can be used in case of re-entry/repair.

3.4.4 Cable termination accessories

FIK&C103.JPG

Cable termination kit (strength member fixation kit) FACC-UCT-10 (10 pc per pack) Universal strength member termination kit for metallic/non-metallic strength members between 1.5 and 5 mm diameter. Kit includes 10 universal strength member terminations, 10 screws and 1 Allen key.


of 31 Issue 2.4 03-2008

GCO2OG32.JPG

8 copper pairs termination disconnect module FIST-CU-TERM8 This module can easily be mounted in the closure to terminate or connect up to 8 copper pairs from a hybrid cable.

3.4.5 Mounting kits & work stands

Consult the MOBRA ordering guide for a schematic overview. See section 2.3 to check compatibility with the closure size (-BX or -FX)

7N752049..JPG

Pole/wall mounting kit FIST-MOUNTING-KIT Bracket for mounting the FIST-GCO2-BC6 closure on a pole or a wall (It does not fit on other sizes). It is not possible to work on the closure while it is mounted on this bracket.

7N7K2063.JPG

Wall mounting kit FIST-UNI-MOUNT-W Mounting kit to hang FIST-GCO2 closures on a wall.

FCMFI01.JPG

Wall mounting kit (6-round-port-base) FIST-MOBRA4-FIX Bracket for mounting all GCO2 closure sizes (with 6-round-port-base) on a wall. It is possible to work on the closure while it is mounted on this bracket.

FCMFI01B.JPG

Wall mounting kit (16-round-port-base) FIST-MOBRA-16-FIX Bracket for mounting all GCO2 closure sizes (with 16-round-port-base) on a wall. It is possible to work on the closure while it is mounted on this bracket.


of 31 Issue 2.4 03-2008

MOBRA040.JPG

Work stand (for 6-round-port-base only) FIST-WORK-STAND A tool to hold the closure and mounting bracket in a vertical position during installation.

7N3K0521.JPG

Hingeable work stand (for 6-round-port-base only) FIST-WORKSTAND-H A tool to hold the closure and mounting bracket in a vertical or horizontal position during installation.

7N753818.JPG

Hingeable work stand (for 16-round-port-base only) FIST-WORKSTAND-16-H A tool to hold the closure and mounting bracket in a vertical or horizontal position during installation.

7P2P2660.JPG

Work stand (for GCO2-FX) FIST-WORKSTAND-FX A bracket to keep the closure in a vertical or horizontal position during installation.

7P2P4594.JPG

External cable fixation bracket for GCO2-BX FIST-GCO2-BX6-EXT/CF A cable securing frame, combined with a mounting bracket, can be mounted on the base using 4 split pins. Used for large quantities of small cables, typically in combination with FIST-GCO2-RSKG-… kits. Order FIST-GCOG-L-BRACKET and FIST-GCOG-WALL-KIT if needed.

7N752062.JPG

Wall mounting bracket for GCO2-BX FIST-GCOG-L-BRACKET To be used with FIST-GCO2-BX6-EXT/CF and FIST-GCOG-WALL-KIT.


of 31 Issue 2.4 03-2008

7N751496.JPG

Wall mounting set FIST-GCOG-WALL-KIT To be used with FIST-GCO2-BX6-EXT/CF and FIST-GCOG-L-BRACKET

7P2P4596.JPG

External cable fixation bracket for GCO2-FX FIST-GCO2-FX6-EXT/CF The cable securing frame can be mounted on the base with 2 screws. Used for large quantities of small cables, typically in combination with FIST-GCO2-RSKG-… kits.

3.4.6 Organizer modules

See the SOSA2 organizer ordering guide. 3.4.7 Storage baskets

See section 2.4 to check compatibility with the closure size (-BX or -FX)

GC2OG026.JPG

FIST-BASKET-A Storage basket to store the uncut fibers of a loose tube ribbon or central core cable. Model designed for size BC.

GC2OG027.JPG

FIST-BASKET-B Storage basket to store the uncut fibers of a loose tube ribbon or central core cable. Model designed for size BD and BE.

Notes: 1. To store uncut single fiber loose tubes, no extra items need to be ordered; a plastic sleeve

is delivered with the oval port seal kit for loose tube to store the tubes between the UMS profiles.

2. Uncut fibers can also be stored on trays using their loop-back facility.


of 31 Issue 2.4 03-2008

3.4.8 Installation kit components

I&CO32.JPG

Cutting wire FISTV-E7185-3010-S5027 Cutting wire to open the FIST-GCO2 ports.

I&C034.JPG

Silica gel Silica gel to dry the air in the closure, to be replaced after each re-entry.

3.5 Tools

I&C030.JPG

Looped cable insertion tool FISTV-LCIT A tool to help feed the uncut loose buffer tubes through the oval outlet port in a controlled manner.

TO26.JPG

Heat gun FACC-HEAT-GUN-220V A 1460W, 220V heat gun to shrink the cable seals as recommended. FACC-HEAT-GUN-110V A 1460W, 110V heat gun to shrink the cable seals as recommended.

7N3K1809.JPG

Nozzle with side outlet FACC-HEAT-GUN-TIP-01 It is recommended to use this nozzle with side outlet on the heat gun for the installation of the seals on the 16-port-base.


of 31 Issue 2.4 03-2008

TO11.JPG

Flameless gas torch FACC-S-HOT-AIR-TORCH A flameless gas torch that can be used to shrink the cable seals if no 1500W power source is available.

DSC00045.JPG

Axial tube stripper FACC-AXIAL-STRIPPER-01 SIECOR tooling to split cut or uncut (midspan) buffer tubes, 2.4-3.0 mm in diameter, or pigtail jacket to expose fibers without damaging them. Resulting buffer tube halves can be easily removed with scissors. FACC-AXIAL-STRIPPER-01-SP Spare knifes for SIECOR axial stripper 01

TO17.JPG

Tube stripper FACC-TUBE-STRIPPER-02 Tube stripper OPTI-STRIP to cut the loose buffer tubes of the fiber cable in confined spaces. FACC-TUBE-STRIPPER-02-SP Spare knive for FACC-TUBE-STRIPPER-02

RAUCUT1.JPG

FACC-AXIAL-STRIPPER-RC1 Raucut1 tooling to open cut or uncut (midspan) buffer tubes. Kit includes inserts for tubes 1.8 to 4.2 mm diameter. FACC-AXIAL-STRIPPER-RC16 Optional insert for 1.6mm loose tubes, to be used together with FACC-AXIAL-STRIPPER-RC1.


of 31 Issue 2.4 03-2008

3.6 Standard application kits

3.6.1 Network functions

Standard application kits are available for GCO2-BX6 sizes only. Other application kits can be configured on customer request. Application kits for single fiber have been identified for the following network functions:

SE

Cable Cable

Splice

Fiber

Track joint Two cable lengths are spliced onto each other. The joint is not a flexibility point in the network; typically single element trays are used. This type of joint is used when at the end of the cable spool or when an outdoor cable has to be spliced to an indoor cable (cable chamber joint).

SC 'dead' end

Spur joint type 1 Branch a number of fibers onto another cable; the main cable continues without being cut and spliced. The fibers of the main cable are stored as tubes. Single Circuit trays are used since this is a flexibility point in the network.

SE

SC

Spur joint type 2 Branch a number of fibers onto another cable; the main cable continues and is spliced as well. The main cable continues via single element trays.

SC SC

Spur joint type 3 Branch off a secondary ring from a main ring; the main cable continues without being cut and spliced. The fibers of the main cable are stored as tubes.

SC SC

SE

Spur joint type 4 Branch off a secondary ring from a main ring; the main cable continues via single element trays.


of 31 Issue 2.4 03-2008

3.6.2 Track joint

Order code: FIST-GCO2-TJ-SFKITXX Cable fiber count Fiber organization 24F 48F

SE

72F 96F 144F 192F 288F

Single fiber loose tube 8 fibers per tube/tray

01 02 03 04 05

Single fiber loose tube 12 fibers per tube/tray

06 07 08 09 10 11 12

13 14 15 16 Central core cable 12 fibers per tray

Kit content (detailed in 3.6.7) − FIST-GCO2-BC6-NN (See details under paragraph 2.2) − SOSA2’s with single element trays for fiber counts indicated in the table − 2 round port seal kits − Heat shrinkable splice protectors (SMOUV-1120-02 with a length of 45 mm) 3.6.3 Spur joint type 1

Order code : FIST-GCO2-SJ1-SFKITXX Note Kits are defined assuming that 50% of the fibers are spliced to the branch. Example KIT04 contains 24 single circuit trays (for 48 fibers, which is 50% of the indicated

fiber count). Cable fiber count Fiber organization 24F 48F 72F 96F 144F 192F 288F

Single fiber loose tube 2 fibers per tray

01 (BC6)

02 (BC6)

03 (BC6)

04 (BC6)

05 (BC6)

06 (BC6)

07 (BD6)

SC 'dead' end

08 09 10 11 Central core cable (BC6) (BC6) (BC6) (BC6) 2 fibers per tray

Kit content (detailed in 3.6.7) − Closure type as indicated in the table, without ground feed-through and flash test valve − SOSA2’s with Single circuit trays for 50% of the fiber count indicated in the table. − 1 oval port seal kit − 1 round port seal kit − Heat-shrinkable splice protectors (SMOUV-1120-02 with a length of 45 mm) − Storage basket for the central core cable kits (kits 8 - 11)

Note: the tube diameter of the loop is limited to 2.8 mm for kits 05, 06 and 07.


of 31 Issue 2.4 03-2008

3.6.4 Spur joint type 2

Order code: FIST-GCO2-SJ2-SFKITXX Note Kits are defined assuming that 50% of the fibers are spliced to the branch. Example KIT09 contains 24 single circuit trays (for 48 fibers, which is 50% of the indicated

fiber count) and 4 single element trays (for 48 fibers, which is 50% of the indicated fiber count)

Cable fiber count Fiber organization 24F 48F 72F 96F 144F 192F 288F

Single fiber loose tube 8 fibers per tray/tube

01 (BC6)

02 (BC6)

03 (BC6)

04 (BC6)

05 (BC6)

Single fiber loose tube

SE

SC

06 (BC6)

07 (BC6)

08 (BC6)

09 (BC6)

10 (BC6)

11 (BD6)

12 (BE6) 12 fibers per tray/tube


Kit content (detailed in 3.6.7) − Closure type as indicated in the table, without ground feed-through and flash test valve − SOSA2’s with SC trays for 50% of the fiber count indicated in the table. − SOSA2’s with SE trays for 50% of the fiber count indicated in the table. − 1 oval port seal kit − 1 round port seal kit − Heat-shrinkable splice protectors (SMOUV-1120-02 with a length of 45 mm) 3.6.5 Spur joint type 3

Order code : FIST-GCO2-SJ3-SFKITXX Note Kits are defined assuming that 50% of the fibers are spliced to the branch. Example KIT04 contains 2x 24 single circuit trays (for 2x 48 fibers, which is 50% of the

indicated fiber count). Cable fiber count Fiber organization 24F 48F 72F 96F 144F 192F 288F

Single fiber loose tube 2 fibers per tray

01 (BC6)

02 (BC6)

03 (BC6)

04 (BC6)

05 (BD6)

06 (BE6)

SC SC


Kit content (detailed in 3.6.7) − Closure type as indicated in the table, without ground feed-through and flash test valve − SOSA2’s with SC trays for fiber count indicated in the table. − 1 oval port seal kit − 2 round port seal kits − Heat-shrinkable splice protectors (SMOUV-1120-02 with a length of 45 mm) − Basket for central core cable kits (kits 8 - 11)


of 31 Issue 2.4 03-2008

3.6.6 Spur joint type 4

Order code: FIST-GCO2-SJ4-SFKITXX Note Kits are defined assuming that 50% of the fibers are spliced to the branch. Example KIT09 contains 2x 24 single circuit trays (for 2x 48 fibers = 50% of the indicated fiber

count) and 4 single element trays (for 48 fibers = 50% of the indicated fiber count). Cable fiber count Fiber organization 24F 48F 72F 96F 144F 192F 288F


01 (BC6)

02 (BC6)

03 (BC6)

04 (BD6)

05 (BE6)


06 (BC6)

07 (BC6)

08 (BC6)

09 (BD6)

10 (BE6)

11 (BE6)

SC SC

SE

12 13 14 15 (BD6)

Central core cable (BC6) (BC6) (BC6) 12 fibers per tray

Kit content (detailed in 3.6.7) − Closure type as indicated in the table, without ground feed-through and flash test valve − SOSA2’s with SC trays for the fiber count indicated in the table. − SOSA2’s with SE trays for 50% of the fiber count indicated in the table. − 1 oval port seal kit + 2 round port seal kits − Heat-shrinkable splice protectors (SMOUV-1120-02 with a length of 45 mm) 3.6.7 Standard application kit contents

Track joint kits FIST-GCO2-TJ-SFKITxx

Kit content 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16

FIST-GCO2-BC6-NN 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 FIST-GCO2-BD6-NN FIST-GCO2-BE6-NN FIST-SOSA2-4SC-S FIST-SOSA2-8SC-S FIST-SOSA2-2SE-S 1 1 1 1 1 1 1 FIST-SOSA2-4SE-S 1 1 2 3 4 1 1 2 3 4 6 1 1 2 SMOUV-1120-02 (pc) 24 48 72 96 144 24 48 72 96 144 192 288 24 48 72 96 FIST-BASKET-A FIST-GCO2-OSK-CC FIST-GCO2-OSK-LTS FIST-GCO2-RSK-CC 2 2 2 2 FIST-GCO2-RSK-LTS 2 2 2 2 2 2 2 2 2 2 2 2

Spur joint type 1 kits

FIST-GCO2-SJ1-SFKITxx Kit content 01 02 03 04 05 06 07 08 09 10 11

FIST-GCO2-BC6-NN 1 1 1 1 1 1 1 1 1 1 FIST-GCO2-BD6-NN 1 FIST-GCO2-BE6-NN FIST-SOSA2-4SC-S 1 1 1 1 1 FIST-SOSA2-8SC-S 1 1 2 3 4 6 9 1 1 2 3 FIST-SOSA2-2SE-S FIST-SOSA2-4SE-S SMOUV-1120-02 (pc) 16 24 40 48 72 96 144 12 24 36 48 FIST-BASKET-A 1 1 1 1 FIST-GCO2-OSK-CC 1 1 1 1 FIST-GCO2-OSK-LTS 1 1 1 1 1 1 1 FIST-GCO2-RSK-CC 1 1 1 1 FIST-GCO2-RSK-LTS 1 1 1 1 1 1 1


of 31 Issue 2.4 03-2008

Spur joint type 2 kits

FIST-GCO2-SJ2-SFKITxx Kit content 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16

FIST-GCO2-BC6-NN 1 1 1 1 1 1 1 1 1 1 1 1 1 1 FIST-GCO2-BD6-NN 1 FIST-GCO2-BE6-NN 1 FIST-SOSA2-4SC-S 1 1 1 1 1 1 1 1 FIST-SOSA2-8SC-S 1 1 2 3 4 1 1 2 3 4 6 9 1 1 2 3 FIST-SOSA2-2SE-S 1 1 1 1 1 1 1 1 FIST-SOSA2-4SE-S 1 1 1 2 1 1 1 1 2 3 1 1 SMOUV-1120-02 (pc) 24 48 72 96 144 24 48 72 96 144 192 288 24 48 72 96 FIST-BASKET-A 1 1 1 1 FIST-GCO2-OSK-CC 1 1 1 1 FIST-GCO2-OSK-LTS 1 1 1 1 1 1 1 1 1 1 1 1 FIST-GCO2-RSK-CC 1 1 1 1 FIST-GCO2-RSK-LTS 1 1 1 1 1 1 1 1 1 1 1 1

Spur joint type 3 kits FIST-GCO2-SJ3-SFKITxx

Kit content 01 02 03 04 05 06 07 08 09 10

FIST-GCO2-BC6-NN 1 1 1 1 1 1 1 1 FIST-GCO2-BD6-NN 1 FIST-GCO2-BE6-NN 1 FIST-SOSA2-4SC-S 1 1 FIST-SOSA2-8SC-S 2 3 5 6 9 12 1 3 4 6 FIST-SOSA2-2SE-S FIST-SOSA2-4SE-S SMOUV-1120-02 (pc) 32 48 80 96 144 192 24 48 72 96 FIST-BASKET-A FIST-GCO2-OSK-CC 1 1 1 1 FIST-GCO2-OSK-LTS 1 1 1 1 1 1 FIST-GCO2-RSK-CC 2 2 2 2 FIST-GCO2-RSK-LTS 2 2 2 2 2 2

Spur joint type 4 kits FIST-GCO2-SJ4-SFKITxx

Kit content 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15

FIST-GCO2-BC6-NN 1 1 1 1 1 1 1 1 1 FIST-GCO2-BD6-NN 1 1 1 FIST-GCO2-BE6-NN 1 1 1 FIST-SOSA2-4SC-S 1 1 1 1 FIST-SOSA2-8SC-S 2 3 5 6 9 1 3 4 6 9 12 1 3 4 6 FIST-SOSA2-2SE-S 1 2 1 1 1 1 1 1 1 FIST-SOSA2-4SE-S 1 1 2 1 1 1 2 1 1 SMOUV-1120-02 (pc) 40 72 11

2 144

216

36 72 108

144

216

288

36 72 108

144

FIST-BASKET-A 1 1 1 FIST-BASKET-B 1 FIST-GCO2-OSK-CC 1 1 1 1 FIST-GCO2-OSK-LTS 1 1 1 1 1 1 1 1 1 1 1 FIST-GCO2-RSK-CC 2 2 2 2 FIST-GCO2-RSK-LTS 2 2 2 2 2 2 2 2 2 2 2


of 31 Issue 2.4 03-2008

Addendum 1 - Overview multi-kits

Name Qty/Pk Description Cable to be installed on day 1

Cables that can be installed through the tubes at a later stage

FIST-GCO2-MULTI2/9 1 pc multi drop cable kit for 1 cable and 2 tubes multi termination plate with one strength termination is included

1 cable max. dia. 14 mm

2 cables max. dia. 9.5 mm



2 cables max. dia. 11.5 mm



2 cables max. dia. 12 mm

FIST-GCO2-MULTI3/9 1 pc multi drop cable kit with 3 tubes None 3 cables max. dia. 9.5 mm

FIST-GCO2-MULTI3/11 1 pc multi drop cable kit with 3 tubes None 3 cables max. dia. 11.5 mm

FIST-GCO-MULTI-SEAL 1 pc cable seal kit to seal the cable onto the tube FIST-GCO-MULTI-UCT 1 pc multi termination plate with 3 strength members

to be used with the MULTI3 kits

Tyco Electronics Raychem NV Tyco Electronics, TE logo and FIST are trademarks.

The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, Tyco Electronics makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. Tyco Electronics’ obligations shall only be as set forth in Tyco Electronics’ Standard Terms and Conditions of Sale for this product and in no case will Tyco Electronics be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of Tyco Electronics products should make their own evaluation to determine the suitability of each such product for the specific application.

Diestsesteenweg 692 B-3010 Kessel-Lo, Belgium BTW BE 0405.721.306 RPR Leuven ING 330-0816041-34

www.tycoelectronics.comwww.telecomosp.com © Copyright Tyco Electronics 2007

http://www.tycoelectronics.com/

http://www.telecomosp.com/

ordering guide fist-gco2

Documents