orgaization systems
DESCRIPTION
organization systemsTRANSCRIPT
2012
www.panelplus.co
ORGANIZATION SYSTEMS
G-324
pgs. 324-383
G Base CabinetStorage Solutions
Counter Mount Waste Containers
Cutlery Organizers
Galley Rail
ClosetOrganizers
Door Mount
pg. 333
• Base & Wall Filler Pull Outs - pgs. 375-376• Chrome Blind Corner Optimizer - pg. 375• Cookware Organizers - pg. 373• Pull Out Side Mount Organizer - pg. 374• Under Sink Chrome Basket - pg. 374
• Knife & Cutting Board - pg. 368• Plastic Trays - pgs. 369-370• Spice Trays (Plastic) - pg. 370• Spice Trays (Wood) - pg. 368• Wood Cutlery - pg. 371
pg. 334
• Closet Safe - pg. 340• Coat & Hat Hooks - pg. 357• Hang Rod Brackets (Steel) - pgs. 354-356• Jewelry Trays - pg. 350• Lighting (LED Motion) - pg. 359• Pant Racks - pg. 352• Pull Down Closet Rod - pg. 358• Round & Oval Hang Rod Aluminum - pg. 354 Steel - pgs. 355-356• Shoe Rail - pg. 350• Suspension Rails - pg. 357• Tie Racks - pgs. 351-352• Vanguard® Closet Solutions • Closet Shelf Supports - pgs. 341-342 • Hand Rod Supports - pg. 342 • Wood Hand Rod - pg. 343• Wire Baskets - pg. 353
• Cutting Boards - pg. 377• Door Storage Trays - pg. 371• Spice Racks - pgs. 372, 378• Vertical Foil Rack - pg. 378
Organization System
sK
itchen, Closet, Garage, Laundry &
BathroomGarage
Organization System
• Bike & Sports Equipment Hanger - pg. 346• Brackets - pg. 348• Great Wall - pg. 349• Tool Racks - pgs. 345, 347• Utility Baskets - pg. 344• Utility Hooks - pgs. 347-348
Heavy DutyMixer / Appliance Lift
pg. 366
Hampers
• Roll Out - pg. 360• Wire - pg. 351
ClosetLighting
• LED Motion Light - pg. 359
Filler Mouldings & Caps
• Beaded/Fluted Reversible Filler Mouldings - pg. 334• Beaded/Fluted Caps - pg. 334
G-325
Pull-Out WasteContainer
Sink Front Trays & Hardware
Tot - Lock
Tray Dividers
Wine & Stemware
Range Hoods (Wood)
Tambour
Towel Holder
Wicker Baskets
pg. 367
pg. 366
pgs. 372pg. 361
pgs. 362-363
• Appliance Garage Kit - pgs. 336, 339 • Bamboo Doors - pg. 335• Garage Door Sheets - pgs. 336-337• Paintable - pg. 335• Roll Top Desk Door - pg. 337 • Spring Tension Track Kit - pg. 339• Tracks - pg. 338
pgs. 372
pg. 377
• Built In Waste Bins - pg. 333• Double Container - pgs. 379-380• Solid Wood Pull-Out With PVC Waste Bins - pg. 383• Stainless Steel - pg. 382• Wire - pg. 380-381
Omega Kitchen Storage
• Deep Bin Super Susan - pg. 365• Plate Display Unit - pg. 364• Select Spice Susan - pg. 365• Spice Rack - pgs. 364-365• Tra-Sta Deep Drawer Kit - pg. 365• Tra-Sta Organizer - pg. 365• Wood Spice Drawer Insert - pg. 364
Spice Organizers
Ironing BoardCenter
pg. 359
Lazy Susans• Deep Bin Super Susan - pg. 365• D-Shaped Wood - pg. 332 • Half Moon Polymer - pg. 329• Mouldings - Flexible - pg. 332• Polymer - pgs. 326-329• Wood - pgs. 330-332
Rev•A•Shelf®
• Select Spice Susan - pg. 365• Spice Drawer Inserts - pgs. 364, 368• Spice Drawer Trays - pg. 370• Spice Racks - pgs. 364, 372, 378
• Applicance Lift - pg. 366• Bathroom / Laundry - pgs. 351, 359-360• Closet Organizers - pgs. 350-353, 358-359• Cutlery Trays - pgs. 368-371• Kitchen Door / Cabinet Organizers - pgs. 371-378• Lazy Susans - pgs. 326-332 • Pull-Outs - pgs. 351-353, 359-360, 372-376, 379-383• Sink Front Trays - pg. 367• Waste Bins / Containers - pgs. 333, 379-383• Wine & Stemware - pg. 361
G-326
DEPENDENTLY ROTATING SHELVES(ALL SHELVES TURN TOGETHER AT ONE TIME)
• Features a 3/4” chrome plated diameter shaft system for absolute durability.• Accommodates inside cabinet height ranges of 24” to 46”.• Installation Hardware included with all units.
(SHELVES TURN INDEPENDENT OF EACH OTHER)• Single shelf unit features a 1” chrome plated x 5” high shaft, positioner
assembly and mounting screws for a smooth & finished look.• The two (2) shelf sets feature a 1” chrome plated shaft system
with a height adjustment of 26”- 32”.• Installation hardware included with all units.
cHROME HUB FEATURE
PIvOT
cOllAR ASSEMBly
3/4” DIAMETERSHAFT
SHElvES
2 SHElF SET 3 SHElF SET
Positioner mounts assembly underneath
not shown in Photo
1” DIAMETER5” lOng SHAFT
SInglE SHElF - 6621 SERIES
1” DIAMETERSHAFTSHElF
6072 SERIES
PART # COLOR# OF
SHELVESDIAMETER
OF SHELVES
ACCOMMODATES INSIDE CABINET
HEIGHT6012-18-11-52 White 2 18” 24” to 31”6012-18-15-52 Almond 2 18” 24” to 31”6012-20-11-52 White 2 20” 24” to 31”6012-20-15-52 Almond 2 20” 24” to 31”6012-24-11-52 White 2 24” 24” to 31”6012-24-15-52 Almond 2 24” 24” to 31”6012-28-11-52 White 2 28” 24” to 31”6012-28-15-52 Almond 2 28” 24” to 31”6013-18-11-526 White 3 18” 38” to 46”6013-18-15-526 Almond 3 18” 38” to 46”6013-20-11-526 White 3 20” 38” to 46”6013-20-15-526 Almond 3 20” 38” to 46”
PART # COLOR# OF
SHELVESDIAMETER
OF SHELVES
ACCOMMODATES INSIDE CABINET
HEIGHT6072-16-15-52 Almond 2 16” 26”- 32”6072-16-11-52 White 2 16” 26”- 32”6072-18-15-52 Almond 2 18” 26”- 32”6072-18-11-52 White 2 18” 26”- 32”6072-20-15-52 Almond 2 20” 26”- 32”6072-20-11-52 White 2 20” 26”- 32”6072-24-15-52 Almond 2 24” 26”- 32”6072-24-11-52 White 2 24” 26”- 32”6072-28-15-52 Almond 2 28” 26”-32”6072-28-11-52 White 2 28” 26”-32”6072-32-15-52 Almond 2 32” 26”-32”6072-32-11-52 White 2 32” 26”-32”
FULL CIRCLE POLYMER LAZY SUSANS
INDEPENDENTLY ROTATING SHELVES
G-327
DEPENDENTLY ROTATING - SHELVES ATTACH TO DOOR
(SHELVES TURN INDEPENDENT OF EACH OTHER)
• “D” shaped Susans give the maximum space utilization in diagonal wall & base cabinets.
• Available in 20” and 22” diameters. • 2 shelf accommodates an inside
cabinet height (IcH) of 26-32”.• 1” Diameter Shaft.
AC
D
B
D-SHAPE
DIAMETER A B C D20” 8-7/8” 9-1/4” 19” 20-1/8”22” 7-3/16” 16-5/8” 18-3/16” 22”
DIAMETER A B C D Z24” 1-3/8” 1-15/16 13-15/16” 24” 10-9/16” + 1/8”28” 3” 4-1/4” 18-1/4” 28” 10-11/16” + 1/8”
AC
D
B
PIE cUT
Z
5” lOng SHAFT 1” DIAMETER
cHROME HUB
SHAFTSHElF
SHAFT
SHElF
BASE
• These units are recognized throughout the industry as the leader in strength functionality and adjustability for a corner base system.
• The 24” & 28” feature 1” diameter shaft system.• All diameters feature hardened
screws for non slip protection and lubrication on polymer components.
INDEPENDENTLY ROTATING SHELVES
PART # COLOR# OF
SHELVESSHELF
DIAMETERACCOMMODATES
INSIDE CABINET HEIGHT6272-20-11-52 White 2 20” 26-32”6272-20-15-52 Almond 2 20” 26-32”6272-22-11-52 White 2 22” 26-32”6272-22-15-52 Almond 2 22” 26-32”
PART # COLORSHELF
DIAMETER# OF
SHELVESSHAFT
DIAMETERACCOMMODATES
INSIDE CABINET HEIGHT6942-24-11-52 White 24” 2 1” 26”-32”6942-24-15-52 Almond 24” 2 1” 26”-32”6942-28-11-52 White 28” 2 1” 26”-32”6942-28-15-52 Almond 28” 2 1” 26”-32”
“D” SHAPED POLYMER LAZY SUSANS SETS
PIE CUT POLYMER LAZY SUSANSCORNER BASE CABINET SYSTEM
G-328
INDEPENDENTLY ROTATING SHELVES(SHELVES ROTATE INDEPENDENT OF EACH OTHER)
• Available in a single tray with a 5” chrome plated shaft and hardware set for a smooth finished look.
• Available in a two shelf set with a 1” diameter chrome plated steel tubing, chrome hub, telescoping upper shaft and zinc die cast hardware components for superior independent rotation.
cHROME HUB FEATURE
AC
D
B
KIDnEy
DIAMETER A B C D18” 1-3/4” 2-13/16” 11-13/16” 18”24” 1-1/2” 2-5/16” 14-5/16” 24”28” 3” 4-11/16” 18-5/8” 28”32” 4-1/4” 6-7/16” 22-7/16” 32”
SHELF DIAMETER HEIGHT SPILL LIP A R B D18” 1-7/16” 3/4” 2-1/4” 9” 6-13/16” 11-3/4”24” 2-5/16” 3/4” 2” 12” 10-1/16” 14-1/2”28” 2-9/16” 1” 3-1/2” 14” 10-9/16” 18”32” 2-9/16” 1” 4-3/4” 16” 11-3/8” 21-1/4”
SHElF SPEcIFIcATIOnS
VALUE LINE• Save money and maintain quality with our value line kidney shelf system.• Features high performance polymer hubs and steel shafts with the twist and lock telescoping post.• Available in 2 shelf only in white or almond.
5” SHAFT
*�All�charts�and�specifications�also�apply�to�the�value�line.
UnIvERSAlBRAcKET
POlyMER HUB
STEEl SHAFT
• Save money and maintain quality with our value line full circle shelf system.
• Features high performance polymer hubs and steel shafts with the twist and lock telescoping post.
• Available in 2 or 3 shelves in either white or almond.
contain: 3072- (2) shelves, telescoping shaft to accommodate 26” - 31” Inner cabinet Height, mounting hardware-complete with screws.3073-**-**-531-(3) shelves, telescoping shaft to accommodate 31” - 38” Inner cabinet Height, mounting hardware-complete with screws.3073-**-**-536-(3) shelves, telescoping shaft to accommodate 38” - 46” inner cabinet Height, mounting hardware-complete with screws.
If using with face frame cabinet follow specs: “H” = Height, “L” = Spill Lip, “A” = Center of Rotation, “R” = Tray Radius, “B” = Cabinet Opening, “D” = Cabinet Depth.
1/2” CL.(REF)
13/16” CL.(REF)
1/2” CL.(REF)R
AD B
3/4” (REF)
FACE FRAME
OF CABINET
A
DIMENSIONS FOR
FACE FRAME CABINET
PART # COLOR# OF
SHELVESSHELF
DIAMETERACCOMMODATES
INSIDE CABINET HEIGHT6472-18-11-52 White 2 18” 26”-31”6472-18-15-52 Almond 2 18” 26”-31”6472-24-11-52 White 2 24” 26”-31”6472-24-15-52 Almond 2 24” 26”-31”6472-28-11-52 White 2 28” 26”-31”6472-28-15-52 Almond 2 28” 26”-31”6472-32-11-52 White 2 32” 26”-31”6472-32-15-52 Almond 2 32” 26”-31”
PART # COLOR# OF
SHELVESSHELF
DIAMETER
ACCOMMODATES INSIDE CABINET
HEIGHT3472-24-11-52 White 2 24” 26”-31”3472-24-15-52 Almond 2 24” 26”-31”3472-28-11-52 White 2 28” 26”-31”3472-28-15-52 Almond 2 28” 26”-31”3472-32-11-52 White 2 32” 26”-31”3472-32-15-52 Almond 2 32” 26”-31”
PART # COLOR# OF
SHELVESSHELF
DIA.3072-18-11-52 White 2 18”3072-18-15-52 Almond 2 18”3072-20-11-52 White 2 20”3072-20-15-52 Almond 2 20”3072-28-11-52 White 2 28”3072-28-15-52 Almond 2 28”3073-18-11-531 White 3 18”3073-18-15-531 Almond 3 18”3073-18-11-536 White 3 18”3073-18-15-536 Almond 3 18”
KIDNEY SHAPED POLYMER LAZY SUSANS
VALUE LINE FULL CIRCLE SHELF SETS, INDEPENDENTLY ROTATING
G-329
FRAMED CABINET SPECIFICATIONS
FRAMELESS CABINET (EURO) SPECIFICATIONS
• Available in a single and double shelf set.• Available in 3 minimum cabinet opening sizes:
13-1/4”, 16-1/8”, and 19-1/4”.• The half moon series includes standard framed and 90 degree
hinge euro brackets.• Includes chrome-plated shaft and mounting brackets to help
distribute the weight from the cabinet wall to the floor of the cabinet.• Includes color coated shelf supports to match the shelves and
provide maximum deflection support.• Available in white and almond where noted.
A
B
CD
10-1/4
STAnDARD SHElF SUPPORT BRAcKET
TRAY SIZE A B C D31 33-11/16” 21-1/2” 13-1/4” 21-1/16”33 34-5/16” 18-9/16” 16-1/8” 24-1/16”39 40-11/16” 21-13/16” 19-1/4” 27-3/8”
TRAY SIZE A B C D31 32-13/16” 21-1/2” 15” 21-1/16”33 33-3/16” 18-9/16” 17-7/16” 24-1/16”39 39-7/8” 21-13/16” 20-3/4” 27-3/8”
A
B
COFFSET SHElF
SUPPORT BRAcKET
SInglE
DOUBlE
D
10-1/4
SHELF SUPPORT(1)
SHELF SUPPORT
(2)
SLIDE ASSEMBLY
SLIDE ASSEMBLY ATTACHED TO SHELF SUPPORT
PART # COLOR# OF
SHELVESTRAY
LENGTH
ACCOMMODATES MINIMUM CABINET
OPENING OF:
SINGLE TRAY PIVOTS AND
SLIDE
6881-31-11-52 White 1 31” 13-1/4”6881-31-15-52 Almond 1 31” 13-1/4”6881-33-11-52 White 1 33” 16-1/8”6881-33-15-52 Almond 1 33” 16-1/8”6881-39-11-52 White 1 39” 19-1/4”6881-39-15-52 Almond 1 39” 19-1/4”
TWO SHELF SETS PIVOTS
AND SLIDE
6882-31-11-570 White 2 31” 13-1/4”6882-31-15-570 Almond 2 31” 13-1/4”6882-33-11-570 White 2 33” 16-1/8”6882-33-15-570 Almond 2 33” 16-1/8”6882-39-11-570 White 2 39” 19-1/4”6882-39-15-570 Almond 2 39” 19-1/4”
TWO SHELF SET (1) PIVOT AND (1) PIVOT
& SLIDE
6862-31-11-570 White 2 31” 13-1/4”6862-31-15-570 Almond 2 31” 13-1/4”6862-33-11-570 White 2 33” 16-1/8”6862-33-15-570 Almond 2 33” 16-1/8”6862-39-11-570 White 2 39” 19-1/4”6862-39-15-570 Almond 2 39” 19-1/4”
TWO SHELF SETS PIVOTS
ONLY
6842-31-11-570 White 2 31” 13-1/4”6842-31-15-570 Almond 2 31” 13-1/4”6842-33-11-570 White 2 33” 16-1/8”6842-33-15-570 Almond 2 33” 16-1/8”6842-39-11-570 White 2 39” 19-1/4”6842-39-15-570 Almond 2 39” 19-1/4”
HALF MOON POLYMER LAZY SUSANS
G-330
These durable wood shelves are made with a 5/8” thick high-density multi-ply tray & 1” high solid wood rim that’s protected with a
UV-cured clear coat finish.
4WlS001-*-52
INDEPENDENTLY ROTATING SYSTEM
• Our wood susans offer the beauty of Maple without the worries or warping and splitting.• Our wood trays are made with a 5/8” thick high density multi-ply tray and a 1” high solid
wood rim that’s protected with a Uv cured clearcoat finish.
(SHELVES ROTATE INDEPENDENTLY OF EACH OTHER)
AC
D
B
DIAMETER A B C D24” 1-7/16” 2-1/2” 14-1/4” 23-15/16”28” 2-7/8” 4-3/8” 18-1/4” 27-3/4”32” 4-1/16” 6-1/16” 21-15/16” 31-3/4”
4WlS401-*-BS52Not�avail.�in�24”
HAS METAl BAll BEARIng SWIvEl ATTAcHED (not shown)
4WlS421-*-52
5” SHAFT
4BS-10-14B-10-1
This “wood series features a durable 1” chrome plated diameter shaft system with independent rotating hardware and a telescoping shaft.
4WlS072-*-52
4WlS073-*-536
cHROME HUB
SHAFT
SHElF
PART # DIAMETER
ACCOMMODATES INSIDE CABINET
HEIGHTSINGLE TRAY W/SWIVEL &
BEARING ATTACHMENT4WLS401-28-BS52 28” Any4WLS401-32-BS52 32” Any
2 SHELF SET4WLS472-24-52 24” 26” - 31”4WLS472-28-52 28” 26” - 31”4WLS472-32-52 32” 26” - 31”
DESCRIPTION PART #DIMENSIONS(IN DIAMETER)
ACCOMMODATES INSIDE CABINET
HEIGHT
SINGLE TRAYNOT PRE-DRILLED(NO HARDWARE)
4WLS001-18-52 18” Any4WLS001-20-52 20” Any4WLS001-28-52 28” Any4WLS001-32-52 32” Any
SINGLE TRAY WITH SWIVEL & BEARING
ATTACHED (NO SHAFT)
4WLS001-18-B52 18” Any4WLS001-20-B52 20” Any4WLS001-28-B52 28” Any4WLS001-32-B52 32” Any
2 SHELF SET4WLS072-18-52 18” 26”-31”4WLS072-20-52 20” 26”-31”4WLS072-28-52 28” 26”-31”4WLS072-32-52 32” 26”-31”
3 SHELF SET 4WLS073-18-536 18” 38”-46”4WLS073-20-536 20” 38”-46”
PART # DESCRIPTION4B-7-1 7” dia. Bearing
4BS-7-1 7” dia. Bearing w/ Stop4B-10-1 10” dia. Bearing
4BS-10-1 10” dia. Bearing w/ Stop
4WlS472-*-52
cHROME HUB
SHElF1” SHAFT
All�Wood�Items�Are�Carb�Phase�II�Compliant
FULL CIRCLE WOOD LAZY SUSANS
KIDNEY SHAPED WOOD SUSANS
G-331
• Our Pie cut Susans are now available in wood and made of 5/8” thick high-density multi-ply tray and 1” high solid wood rim.
• Available in a 2 shelf system. • Ideal for a corner base cabinet.• The 2 shelf set features a 1” diameter chrome shaft
system and all hardware.
DIAMETER A B C D Z24” 1-3/8” 1-15/16 13-15/16” 24” 10-9/16” + 1/8”28” 3” 4-1/4” 18-1/4” 28” 10-11/16” + 1/8”31” 4” 5-3/4” 21” 32” 11-15/16 + 1/8”
AC
D
B
PIE cUT
Z
• The Half Moon Susan is now available and made of 5/8” thick high-density multi-ply tray and 1” high solid wood rim that’s protected with a Uv-cured clearcoat finish.
• Available in a two shelf system only and in three tray lengths- (32”, 35” & 38”).
• Ideal solution for a blind corner cabinet application.
• This system features a pivot and pull on both shelves and are adaptable to a left or right hand cabinet application.
4WlS942-*-52
SlIDE ASSEMBly PRIOR TO SHElF BEIng ATTAcHED
SHElF
SHElFSUPPORT
InclUDED AccESSORIES
SHElF SUPPORT SlIDE ASSEMBlIES
PART # DIAMETERACCOMMODATES INSIDE
CABINET HEIGHT
TWO SHELF SET
4WLS942-24P-52 24” 26” - 32”4WLS942-28P-52 28” 26” - 32”4WLS942-31P-52 31” 26” - 32”
PART # DIAMETER
ACCOMMODATES MINIMUM CABINET
OPENING OF:4WLS882-32-570 32” 12”4WLS882-35-570 35” 15”4WLS882-38-570 38” 18”
PIE CUT WOOD SUSANS
HALF MOON WOOD SHELF SUSAN
All�Wood�Items�Are�Carb�Phase�II�Compliant
G-332
INDEPENDENTLY ROTATING SHELVES
• ”D” Shaped Susans give the maximum space utilization in diagonal and wall base cabinets.• Our “D” Shaped Wood shows off the beauty of maple without the worries of warping and splitting.• This durable wood shelf is made with 5/8” thick high density multi-ply tray and 1” high solid wood trim that is protected with a Uv-cured clear coat finish.• Available in a single shelf w/ swivel and bearing stop, single shelf w/ positioner assembly and 5” shaft and 2 shelf w/ accommodating shaft.
DIAMETER A B C D20” 8 3/8” 11” 18 3/8” 20”31” 14” 12 7/8” 29 1/2” 31”
Single Shelf w/Shaft 4WLS221-*-52
2 Shelf Set 4WLS272-*-52
D
C
AB
SInglE TRAynO SHAFT
METAl BAll-BEARIng SWIvEl
4Wl201-20-BS52
(SHELVES TURN INDEPENDENTLY OF EACH OTHER)
308-1254-WH 1-1/2” 1.500
.125
.500
Available in WhiteS3 OR S9 SLOTTER
Flexible Lazy Susan Moulding
PVC Material50’ Rolls
PART # DIAMETER
ACCOMMODATES INSIDE CABINET
HEIGHTSINGLE TRAY W/ METAL BALL SWIVEL BEARING ATTACHED (NO SHAFT)
4WLS201-20-BS52 20” Any
4WLS201-31-BS52 31” Any
2 SHELF SET4WLS272-20-52 20” 26” - 31”
4WLS272-31-52 31” 26” - 31”
“D” SHAPED WOOD SUSANSAll�Wood�Items�Are�Carb�Phase�II�Compliant
G-333
Rev-A-Shelf presents another ultra modern innovation with the Counter Mount Waste Container. Ideal for medical offices, retail counters, recreational vehicles, upscale outdoor kitchens, and more; this waste management system sits inside the cabinet with full access to the container from the countertop. The 8-060 Series is available with an 11 or 13-liter removable container and features a stainless steel lid and soft rubber inner ring designed to seal odors.
8-700411-20 8-010 Series 8-010314-15 5368-17-13
Lid, Rubber Inner Ring & 11 or 13 Liter
Container
Open Closed for clean neat look
Ideal for keeping garbage out-of-sight. As the cabinet door opens, the lifting mechanism raises the lid enabling the container to pivot-out with the door. All pivot-outs feature an inner polymer container with built-in handle for easy removal.CONTAINS: Waste container with installation templates and fasteners.
PART # COLOR DESCRIPTION MINIMUM CABINET OPENING
8-700411-20 White Polymer(Plastic)
20 Liter Sink Base Container15 3/4” W x 7 1/4” D x 14”H 16-1/4”
8-010212-14 White Lacquered(Metal)
14 Liter Container11” W x 10 1/2” D x 13 3/4” H 13-3/4”
8-010412-15 White Lacquered(Metal)
15 Liter Container11-1/2” W x 11 1/2” D x 13 1/2” H 14-3/4”
8-010314-15 Stainless Steel 15 Liter Container11” W x 10 1/2” D x 15 3/4” H 13-3/4”
5368-17-13 Silver(Plastic Polymer)
13 Liter Container11 1/4” W x 11” D x 13 3/4” H 14-1/4”
PART # DESCRIPTION8-060-11SS 11 liter black container - with rubber ring and lid
Dia.: 12-1/4”W x 11-5/8”D8-060-15SS |15 liter black container - with rubber ring and lid
Dia.: 12-1/4”W x 15-5/8”D
8-010/5368/8-700 SERIES BUILT-IN WASTE BINS
8-060 SERIES COUNTER MOUNT WASTE CONTAINER
G-334
PART# SIZE SPECIESBFF-396-RO 3"W x 96"L Red OakBFF-396-MP 3"W x 96"L MapleBFF-396-CH 3"W x 96"L CherryBFF-696-RO 6"W x 96"L Red OakBFF-696-MP 6"W x 96"L MapleBFF-696-CH 6"W x 96"L Cherry
PART# BEADED
PART # FLUTED DESCRIPTION SPECIES
BCAP-33R-RO FCAP-33R-RO 3" x 3" Rosette Cap Red OakBCAP-33R-MP FCAP-33R-MP 3" x 3" Rosette Cap MapleBCAP-33R-CH FCAP-33R-CH 3" x 3" Rosette Cap CherryBCAP-66R-RO FCAP-66R-RO 6" x 6" Rosette Cap Red OakBCAP-66R-MP FCAP-66R-MP 6" x 6" Rosette Cap MapleBCAP-66R-CH FCAP-66R-CH 6" x 6" Rosette Cap CherryBCAP-35D-RO FCAP-35D-RO 3" x 5-1/2" Daisy Cap Red OakBCAP-35D-MP FCAP-35D-MP 3" x 5-1/2" Daisy Cap MapleBCAP-35D-CH FCAP-35D-CH 3" x 5-1/2" Daisy Cap CherryBCAP-33A-RO FCAP-33A-RO 3" x 3" Acanthus Cap Red OakBCAP-33A-MP FCAP-33A-MP 3" x 3" Acanthus Cap MapleBCAP-33A-CH FCAP-33A-CH 3" x 3" Acanthus Cap CherryBCAP-66A-RO FCAP-66A-RO 6" x 6" Acanthus Cap Red OakBCAP-66A-MP FCAP-66A-MP 6" x 6" Acanthus Cap MapleBCAP-66A-CH FCAP-66A-CH 6" x 6" Acanthus Cap Cherry
SPINDLE RAIL SPINDLE RAIL WITH LIP
POST: 1-1/4" HighRAIL: 1/2" High x 3/4" WideOVERALL HEIGHT: 2-1/4"POST SPACING: (center to center) 3"
POST: 1-1/4" HighRAIL: 1/2" High x 3/4" WideOVERALL HEIGHT: 2-1/4"POST SPACING: (center to center) 4"
POST: 1-1/4" HighRAIL: 1/2" High x 3/4" WideBASE: 3/4" High x 1" WideOVERALL HEIGHT: 2-1/2"POST SPACING: (center to center) 4"
P R O D U C T S
SMALL GALLEY RAILAvailable in Red Oak or Maple
• Works with our 3" or 6" reversible filler moulding.• Several styles available in a variety of wood species.• Other styles available, please inquire.
• One moulding designed for either beaded or fluted applications.• Offered in a variety of unfinished wood species.• 2 Widths available.• 3/4" Thick.• Angled version available, please inquire.
DAISy CAP3 x 3
ROSETTE CAP
6 x 6 ACANTHUS CAP
6 x 6 ROSETTE CAP
3 x 3 ACANTHUS CAP
BEADED/FLUTED REVERSIBLE FILLER MOULDINGS
BEADED/FLUTED CAPS
MOULDINGS
CAPS
P R O D U C T S
PART # SPECIES LENGTHBR18RO Red Oak 8 FT.BR18MP Maple 8 FT.
PART # SPECIES LENGTHBR8RO Red Oak 8 FT.BR8MP Maple 8 FT.
PART # SPECIES LENGTHSGR8RO Red Oak 8 FT.SGR8MP Maple 8 FT.
GALLEY RAIL
BEADED/FLUTED FILLER MOULDINGS & CAPS
G-335
BAMBOO TAMBOUR DOORS
UNFINISHED HARDBOARD DOOR - NOMINAL 4’ x 8’ SHEETS1/8” Unfinished Hardboard with Heavy Duty 7 oz. Duck Canvas Backing
Works with our Track Systems P-Spiral, PT, LT, UT, T-48, & ST2.
Canvas is available nominal 4.5 ft. wide. Actual width is approximately 52". Must be sold in increments of 9 square feet.
The same 7 oz. Duck Canvas Backing as used on our doors is offered to you by the square foot for your custom projects.
See page 664 for Tambour Sheets
• Designed for functional tambour door applications.• Carmelized bamboo bonded to 12 oz. poly/cloth backer.• Simply stain or top coat for the Beauty of the Pacific rim.• Nominal 36” W x 40” Slat Length.• 1/8” thick.• Works with our Track Systems A, P-Spiral, PT, LT, UT, T-48 & ST2.
PART # 1267
PART #CANVAS
PART # ECO2-TAM
P R O D U C T S
FUNCTIONAL TAMBOUR DOORS
PAINTABLE TAMBOUR SHEETS
7oz. BROWN DUCK CANVAS BACKING
G-336
AVAILABLE IN 6 WOOD VENEER FACINGS:• Plain Sliced Red Oak • Plain Sliced Maple • Plain Sliced Cherry • “Uniform White Birch” • Hickory • Alder • Nominal 3’ x 4’
6’ SLAT LENGTHS FOR LARGER APPLICATIONS
Same high quality construction series AVAILABLE IN 3 WOOD VENEER FACINGS:• Plain Sliced Red Oak • Plain Sliced Maple • “Uniform” White Birch • Nominal 40” x 72”
• Unfinished & ready to be stained.• May be used horizontally or vertically.• Extremely economical with two 1-1/2” leaders on the long side yields four to six doors.• Works with our Track Systems A, 855-856, FTT, P-Spiral, PT, LT, UT, T-48, & ST2.• Heavy duty 7 oz. Duck Canvas backing insures strength, stability & long life.
See page 664 for Tambour Sheets
1400 SERIES
NOTE: Custom colors available with 15 piece orders. Call for special quote and lead time.
• Durable white-painted Euro-style tambour door for kitchen appliance garages, roll tops and more.• Closely matches to Wilsonart’s #1573-60 Frosty White, with semi-gloss finish.• White fabric backing.• Works with our Track Systems A, 855-856, FTT, LT, UT, T-48, & ST2.
TAMBOUR “GARAGE” DOORS400 SERIES
FROSTY WHITE TAMBOUR DOORS
PART # WOOD FACE412-RO Red Oak413-MP Maple415-CH Cherry416-WB White Birch417-HIC Hickory418-AL Alder
PART # WOOD FACE412-RO-6 Red Oak413-MP-6 Maple416-WB-6 White Birch
PART #1400-WH
APPLIANCE GARAGE DOOR KITS TAMBOUR “GARAGE” DOORS
400 SERIES
G-337
• 3/4” slat width with 30° V-groove.• Nominal 40” wide x 72” slat length.• Two 1-1/2” leaders.• Works with our Track Systems A, 855-856, FTT, LT, UT, T-48 & ST2.
We are is pleased to present the ‘ROLL TOP DESK DOOR’
This is a sectioned wood veneer door perfect for roll top desks or other expanded dimension uses.
Solid Oak Doors with 7 oz. Heavy Duty Canvas Backing makes for an ideal door in custom & flagship projects.
• Heavy duty 7 oz. Duck Canvas Backing.• Sanded & ready for staining.• Works with our Track System B.• Size is nominal.
13835/16” THICK, 3/4” HALF ROUND
1375A5/16” THICK, 3/4” CENTER SPACING,
30° GROOVE ANGLE
• Maple & Cherry Available. Please Inquire.
See page 664 for Tambour Sheets
3/4” CENTER SPACING, 60° GROOVE ANGLE, 3/16” THICK
• Sanded & ready to be stained.• 7 oz. Brown Cloth Backer.• Works with our Track Systems A, 855-856, FTT, PT, LT, UT, T-48, ST2.
TAMBOUR “GARAGE” DOORS
PART # WOOD FACE1577-RO Red Oak1577-CH Cherry1577-MP Maple
PART # FINISH1383-4 Oak
1383-4-MP Maple1383-4-CH Cherry
1383-5 Oak1383-5-MP Maple1383-5-CH Cherry
PART #1375A-41375A-5
PART # WOOD FACE1275-RO Red Oak1275-MP Maple1275-HIC Hickory1275-CH Cherry1275-AL Alder
1275-WAL Walnut
P R O D U C T S
UNFINISHED SOLID WOOD TAMBOUR
UNFINISHED SOLID WOOD TAMBOUR DOORS
VENEER TAMBOUR DOORS FOR LARGER APPLICATIONS
G-338
• Easy to cut desired lengths. • Track can be routed 3/8” deep x 9/16” wide groove or stapled directly to end panels.• All styles accept a maximum thickness of 7/32”.
Material: PVC, White or Brown TRACK PROFILE
22”
22”
Radius1-3/4”
LT-22
SYSTEM “A” For Door Thickness 1/8”-3/16”
Stocked in Brown or Black
APPLICATIONHORIZONTAL OR VERTICAL
INTERCHANGEABLE TRACK AND CURVES(Check Your Door Thickness For Proper Track System) INSTALLATION
SYSTEM “B” For Door Thickness 1/4”-5/16”
Brown Only
PLASTIC TRACK
SYSTEM A...4T5C SYSTEM B...4T54*-AVAILABLE IN 4 FT. OR 8 FT. LENGTHS
CURVESYSTEM A...4C51 SYSTEM B...4C55
Dark Brown Only
10 1/4”
3 3/8”
24”
Radius1-1/2”
PT-24
FOR 1/4” DOOR THICKNESS • 8 FT. LONG(Check Your Door Thickness For Proper Track System)
48”
T-48
RECESSED MOUNT TRACK SYSTEM
PLASTIC TAMBOUR TRACK
FLEXIBLE TAMBOUR TRACK
ROLL TOP DESK TRACK
P-187 WORKS BEST WITH OUR 400 & 700 TAMBOUR SERIES
• Horizontal System will accept up to 21” of tambour length.• Doors should be cut 1/16”-1/8” less than distance between tracks.• Plastic spirals require approximately a 4-5/8” square area for mounting.• The track requires approximately 1” width for mounting.• Sold in pairs only, consisting of a right & left side.• Available in Brown.
FOR 3/16” DOOR THICKNESS(Check Your Door Thickness For Proper Track System)
FOR VERTICAL USE ONLY
P-SPIRAL PLASTIC TAMBOUR TRACK FOR 1/4” DOOR THICKNESS(Check Your Door Thickness For Proper Track System)
10 1/8”
24”
UT-24
Radius 1-3/4”
Shown in White
See page 664 for Tambour Sheets
PART # COLOR DESCRIPTIONPT-24-BR Brown P TrackPT-24-WH White P TrackLT-22-BR Brown L TrackLT-22-WH White L TrackUT-24-BR Brown U TrackUT-24-WH White U TrackT-48-BR Brown Straight TrackT-48-WH White Straight Track
PART # SYSTEM “B” DESCRIPTION4C55-BR Brown tambour track curve for 1/4”-5/16” thick doors
4T54-BR-* Brown tambour door track for 1/4”-5/16” thick doors
PART #855-856
PART # COLORFTT-BK BlackFTT-WH White
PART # COLORP-187-BR Brown
PART # SYSTEM “A” DESCRIPTION4C51-BR Brown tambour track curve for 1/8”-3/16” thick doors4C51-BK Black tambour track curve for 1/8”-3/16” thick doors
4T5C-BR-* Brown tambour door track for 1/8”-3/16” thick doors4T5C-BK-* Black tambour door track for 1/8”-3/16” thick doors
P R O D U C T S
TRACK SYSTEMS FOR TAMBOUR DOORS
G-339
Appliance garage with solid wood tambour door mounted to solid wood face frame. End panels are veneer faced and backed on 3/8” MDF, using plain sliced veneer. Doweled joints; spring tension track system; smooth, nonbinding operation.Available in Red Oak, Cherry, Maple or Alder.17” W x 18-1/2” H x 11-7/8” D.Fits standard 24” corner.
Appliance garage with solid wood tambour door mounted to solid wood face frame. End panels are veneer faced and backed on 3/8” MDF, using plain sliced veneer. Doweled joints; spring tension track system; smooth, nonbinding operation.Available in Red Oak,Cherry, Alder or Maple.24” W x 18-1/2” H x 11-7/8” D.
Above styles are available in White on a custom order basis - please inquire.
Set includes quality tambour door with handpull and spring tension track system packed together. 1275 series solid tambour door and ST-2 series spring tension track in Almond. Also available with 400 series wood veneer door, please inquire. Door W: 15” or 24” x H 18”. Track H: 17-1/2”.• Make your own appliance garage using these combo kits.
* ST-3- series track available for frameless cabinets - please inquire. * White track available - please inquire.
See page 664 for Tambour Sheets
ST3 EURO STYLE FRAMELESS MOUNTST2 FACE FRAME MOUNT• Kit includes plastic guide rails which can be stapled or screwed to face frame.
• Kit includes plastic guide rails which are recessed or flush mounted to end panels of frameless cabinet.
Material: PVC
APPLICATION:
APPLICATION:
Size: Designed for doors 19” High x .220 Thickness
CORNER UNIT STRAIGHT UNIT
PART # FINISHAG-100-C-RO Red OakAG-100-C-CH CherryAG-100-C-MP MapleAG-100-C-AL Alder
PART # FINISHAG-100-S-RO Red OakAG-100-S-CH CherryAG-100-S-MP MapleAG-100-S-AL Alder
SOLID WOOD DOOR SETSPART # FINISH SIZE
C2-1518S-RO Red Oak 15” x 18”C2-1518S-MP Maple 15” x 18”C2-1518S-CH Cherry 15” x 18”C2-2418S-RO Red Oak 24” x 18”C2-2418S-MP Maple 24” x 18”C2-2418S-CH Cherry 24” x 18”
PART # COLORDOWELWIDTH
ST2-16-WH White 16”ST2-16-AL Almond 16”ST2-24-WH White 24”ST2-24-AL Almond 24”ST2-30-WH White 30”ST2-30-AL Almond 30”ST2-36-WH White 36”ST2-36-AL Almond 36”
PART # COLORDOWELWIDTH
ST3-30-AL Almond 30”ST3-36-AL Almond 36”
APPLIANCE GARAGE DOOR KITS
DOOR AND TRACK COMBO KITS
P R O D U C T S
SPRING TENSION TRACK KITS
G-340
PRODUCT FEATURES:• Organizes jewelry- holds 36+ necklaces, 72+pair earrings &
40+ rings.• Provides full length mirror.• Easy to install - surface mount install is with 2 sheet rock
screws & anchors recess mount install is between 16” OC studs with 2 - 1-1/2” long screws (recesses 2-1/4” into wall).
• Cabinet size 14-1/4” W x 48”L x 4”D.• Available with standard touch latch or magnetic lock.• Available in medium oak, burgundy cherry, natural maple &
white to match any decor.• Forest Green fabric interior.
IS yOUR jEwElRy ORgAnIzED??
Medium Oak Burgundy Cherry Natural Maple White
*Please add appropriate code at the end of the part number (example: jC-103S-MO-T)
PRODUCT FEATURES:• Motion detector light turns on when safe is opened and turns of when safe is closed.• 50% Larger than any competitive unit.
Overall Size: 17” wide x 27” high. Inside Dimensions: 13-1/2” wide x 24” high x 6-3/4” deep.
• 5 Transparent fully adjustable shelves adjustable every 32MM. Earring and ring holders for maximum organization• White powder coating outside to match closet walls.
White powder coating inside to reflect light. No flocking to rub off on jewelry.
• High security lock with six digit touch pad.• Securely mounts between the studs with 6 bolts.• Combination can be changed, instructions included.
PART # MOUNTING FINISHJC-103S-MO-* Surface Medium OakJC-103S-BC-* Surface Burgundy CherryJC-103S-NM-* Surface Natural MapleJC-103S-WH-* Surface WhiteJC-103R-MO-* Recessed Medium OakJC-103R-BC-* Recessed Burgundy CherryJC-103R-NM-* Recessed Natural MapleJC-103R-WH-* Recessed White
PART #SAFE-1727-WH
CLOSET SAFE
JEWELRY-CLOSET™ CABINET
G-341
VG-700-629
VG-700-628
Quick & easy installation with the Vanguard shelving jigVG-600-JIG
INSTALLATION JIG FOR ALL SHELF SUPPORTS• ABS
• Available with 5mm pegs, (Inquire for sockets without pegs)• Supports closet rods up to 1-3/8” diameter• 32mm compatible
CLOSET ROD SOCKETS
• ABS• Designed to provide a shelf support for lighter load applications• Simply install directly into drywall or wood anchors
ECONOMY SHELF SUPPORT
• ABS• Works with standard 5/8” or 3/4” shelves x 12”, 14” & 16” depths• Designed to support 300 lbs. when installed with anchor & pin system (part#: VG-700-805B), no stud location required• Optional finishing cap is available to provide a professional finish where the melamine or wood shelf meets the wall
SHELF SUPPORT AND FINISHING CAP
Shown in Almond (AL)
Also available in Chocolate Pearwood (CP)
ShelfSupport
FinishingCap
AVAILABLE IN THE
FOLLOWING COLORS
White
Almond
ChocolatePearwood
White
Black
Almond
Tan
CherryBrown
ChocolatePearwood
AVAILABLE IN THE
FOLLOWING COLORS
ANCHOR & PIN SYSTEMVG-700-805B (WHITE) CARTON: 500 sets
PART # COLORCARTON
QTY.
VG-140-0116-(WH) White (AL) Almond
(CP) Chocolate Pearwood100 pairs
PART # DESCRIPTION COLORCARTON
QTY.
VG-700-639B- Economy Shelf Support
(WH) White (CP) Chocolate Pearwood
(AL) Almond (BR) Cherry Brown
(TN) Tan (BK) Black
250 pieces
VG-700-805B Anchor & Pin System White 500 sets
PART # DESCRIPTION SIZE COLORCARTON
QTY.VG-700-629-12- Shelf Support
12”(WH) White
(CP) Chocolate Pearwood
50 pairsVG-700-628A-12- 5/8” Finishing Cap 40 piecesVG-700-628C-12- 3/4” Finishing Cap 20 piecesVG-700-629-14- Shelf Support 14” 50 pairsVG-700-628-14- 3/4” Finishing Cap 20 piecesVG-700-631-16- Shelf Support
16”50 pairs
VG-700-628B-16- 5/8” Finishing Cap 40 piecesVG-700-628D-16- 3/4” Finishing Cap 20 pieces
“CREATE - A - CLOSET”...AND MORE! CLOSET, PANTRY AND GARAGE SOLUTIONS
G-342
• ABS• Use with 1-5/16” wood closet rod• Use with 12”, 14” and 16” deep shelves• Designed to support 150 lbs. when back plate is installed directly into a stud - REQUIRED• Unique back plate conceals all screws• Recommended spacing of every 36” to 48”, as long as mounted to a stud
SHELF & ROD CENTER SUPPORTS
• ABS• Use with 1-5/16” wood closet rod• Works with standard 5/8” or 3/4” shelves x 12”, 14” & 16” depths• Designed to support 300 lbs. when installed with anchor & pin system (VG-700-805B), no stud location required
ROD & SHELF SUPPORTS
• ABS• Use with 12”, 14” and 16” deep shelves• Designed to support 150 lbs. when back plate is installed directly into a stud - REQUIRED• Unique back plate conceals all screws• Recommended spacing of every 36” to 48”, as long as mounted to a stud
SHELF CENTER SUPPORTS
ANCHOR & PIN SYSTEM
VG-700-805B (WHITE) CARTON: 500 sets
BACK PLATE TO CONCEAL
SCREWS
BACK PLATE TO CONCEAL
SCREWS
VG-700-634CROSS HATCHED DESIGN
(Shown in White)
VG-700-633CROSS HATCHED DESIGN
(Shown in White)
VG-700-634CCONTEMPORARY DESIGN
(Shown in Chocolate Pearwood)
VG-700-633CCONTEMPORARY DESIGN
(Shown in Chocolate Pearwood)
VG-700-630-12 VG-700-630-16VG-700-630-14
PART # STYLE COLORCARTON
QTY.VG-700-633- Cross Hatch (WH) White
(CP) Chocolate Pearwood20
piecesVG-700-633C- Contemporary
PART # DESCRIPTION COLORCARTON
QTY.VG-700-630-12- 12” Deep Shelf Supports (WH) White
(CP) Chocolate Pearwood
25pairsVG-700-630-14- 14” Deep Shelf Supports
VG-700-630-16- 16” Deep Shelf Supports
PART # STYLE COLORCARTON
QTY.VG-700-634- Cross Hatch (WH) White
(CP) Chocolate Pearwood20
piecesVG-700-634C- Contemporary
“CREATE - A - CLOSET”...AND MORE! CLOSET, PANTRY AND GARAGE SOLUTIONS
G-343
• 96” Long• Hemlock Wood• Seamless, scratch resistant and non-marring polyethylene cover• Finger jointed; thus no bowing, shrinking or expansion of wood• Optional end caps available
HEMLOCK CLOSET ROD & END CAPS1-5/16” Diameter Wood Closet Rod w/Plastic Cover
• 3/4” and 5/8” shelves• ABS and Polystyrene• Field trimmable, nominal 14” & 16” lengths• Effectively joins two shelf panels for corner and straight applications
SHELF JOINER
...GARAGES
...CLOSETS
...PANTRIES
VG-700-637
AVAILABLE IN THE FOLLOWING
COLORS
White Black
AlmondTan
CherryBrown Chocolate
Pearwood
VG-700-627-*
WHITE (*WH)ALMOND (*AL)
CHOCOLATE PEARWOOD (*CP)
OPTIONAL END CAPS
PART # DESCRIPTION COLORCARTON
QTY.
VG-700-637- 3/4” x Nominal 16” Deep (WH) White (CP) Chocolate Pearwood
(AL) Almond (BR) Cherry Brown
(TN) Tan (BK) Black
100 piecesVG-700-635- 5/8” x Nominal 16” Deep
VG-700-637A- 3/4” x Nominal 14” Deep
PART # DESCRIPTIONCARTON
QTY.VG-700-641C-WH White Closet Rod 18
piecesVG-700-641C-AL Almond Closet RodVG-700-641C-CP Chocolate Pearwood Closet RodVG-700-627-WH White End Cap 100
piecesVG-700-627-AL Almond End CapVG-700-627-CP Chocolate Pearwood End Cap
“CREATE - A - CLOSET”...AND MORE! CLOSET, PANTRY AND GARAGE SOLUTIONS
G-344
SUPER BINSAll Accessories You Need To Get Organized!
13/16”1/8”
3/4”
3/4”LEVEL LINE
WITH “NO BOW” CHANNELBOWED SHELF
A B C D
• Clear Anodized *(S)• Black Powder Coat *(BK)• White Powder Coat *(W)
8 Ft. LengthsFor 1/2”, 5/8”, & 3/4” Shelves
WORKS WIth E-Z SlatWall & GREat Wall
ºThe LengTh oF The BrACkeT iS 1/4” LeSS ThAn The SuggeSTed SheLF LengTh
AVAiLABLe in 1', 2', 4’ or 8' LengThSº Made of Clear Anodized Aluminum
ALuMinuM SLATWALL SheLF BrACkeT
hOlDS UP tO 12" D ShElF x 1/4"
OR 3/4" thICK(SCREWS INClUDED FOR
3/4" thICK ONlY)EaSY aS: 1 - PICK SHELF LENGTH 2 - INSERT SHELF INTO EXTRUSION 3 - HANG ON SLATWALL
12”MAx.
SLATWALL
SHELF BRACKETS
SHELF
1/4” or 3/4”
PArT # deSCriPTion CTN QTYA GRD-9TLT-TN Plastic Tan 9 Tilt Bin Storage Unit
23 1/2”-W x 3”-H x 2”-D 12
B GRD-6TLT-TN Plastic Tan 6 Tilt Bin Storage Unit23 1/2”-W x 4 1/2”-H x 3”-D 12
C grd-5TLT-Tn Plastic Tan 5 Tilt Bin Storage Unit23 1/2”-W x 6 1/2”-H x 4 1/2”-D 6
D GRD-4TLT-TN Plastic Tan 4 Tilt Bin Storage Unit23 1/2”-W x 8”-H x 5 1/2”-D 6
PArT # LENGTH1/4”
THICKSHELF
51790-1 1’51790-2 2’51790-4 4’
PArT # LENGTH
3/4”THICKSHELF
41790-1 1’41790-2 2’41790-4 4’41790-8 8’
Part #- GRD-MT-BKdescription- Black
Mounting Clip-- Set of 2 CTN QTY- 25
12” x 6” x 6” grd-u1266-Bk...(Black)grd-u1266-Wh...(White)
Carton Quantity: 6
12” x 12” x 4”GRD-u12124-BK...(Black)GRD-u12124-WH...(White)
Carton Quantity: 6
12” x 12” x 8”GRD-u12128-BK...(Black)GRD-u12128-WH...(White)
Carton Quantity: 6
24” x 12” x 4”GRD-u12244-BK...(Black)GRD-u12244-WH...(White)
Carton Quantity: 6
PArT #SHELF WIDTH
ShF-A500-* 1/2”ShF-A625-* 5/8”ShF-A750-* 3/4”
GARAGE ORGANIZATION
ALUMINUM “NO BOW” SHELF CHANNEL
METAL UTILITY BASKETS
ALUMINUM SHELF SUPPORT BRACKET
G-345
SPECIaltY hOOKS, SUPER BaSKEtS, & SUPER ShElFAll Accessories You Need To Get Organized!
Part #- GRD-GLF-BKdescription- Charcoal Golf Accessory
Rack With BasketCTN QTY- 4
Part #- GRD-HHD-TNdescription- Tan Plastic Garden Hose Holder
(Holds Up To 150’ Of Hose & Needs Mounting Clips)CTN QTY- 4
Part #- GRD-SKTR-BKdescription- Metal Skate Rack With Basket
CTN QTY- 4
Part #- GRD-TOOL-BKdescription- Charcoal Metal Tool Rack
CTN QTY-4
Part #- grd-13TL-Bkdescription- Black 13” MagneticTool Bar (Needs Mounting Clips)
CTN QTY- 1
Part #- grd-24TL-Bkdescription- Black 24” MagneticTool Bar (Needs Mounting Clips)
CTN QTY- 1
Part #- grd-B16114-Bkdescription- Small Metal Basket
16” x 11-1/2” x 4”CTN QTY- 4
Part #- grd-B16118-Bkdescription- Large Metal Basket
16” x 11-1/2” x 8”CTN QTY- 4
Part #- grd-S2007-Bkdescription- Charcoal 20” X 7” Shelf
With 2 HooksCTN QTY- 4
GARAGE ORGANIZATION
G-346
SPECIaltY hOOKS & RaCKSAll Accessories You Need To Get Organized!
Part #- GRD-TB-BKdescription- Charcoal Metal Long Tool Bar
With PVC CoatingCTN QTY- 4
Part #- GRD-GDN-BKdescription- Charcoal Metal Garden
Rack With BasketCTN QTY- 6
Part #- grd-SPrP-Tndescription- Tan Plastic Sports Rack
(Needs Mounting Clips)CTN QTY- 1
Part #- grd-5Bh-Bkdescription- Charcoal 5” Metal Bike Hook
With PVC CoatingCTN QTY- 6
Part #- grd-SPor-Bkdescription- Charcoal Metal Sports
Accessory RackCTN QTY- 4
Part #- GRD-FHH-BKdescription- Charcoal Metal Fishing Rod Holder
With Rubberized Grip (Holds 4 Fishing Rods)CTN QTY- 4
Part #- GRD-HBKR-BKdescription- Charcoal Metal Horizontal
Bike RackCTN QTY- 4
Part #- GRD-SKR-BKdescription- Charcoal Metal Ski Rack
CTN QTY- 6
Part #- GRD-TNH-BKdescription- Charcoal Metal Tennis
Accessory Holder With Rubberized SleeveCTN QTY- 4
GARAGE ORGANIZATION
G-347
It’S a SNaP WIth SUPER hOOKSAll Accessories You Need To Get Organized!
PRODUCt FEatURES:• Strong & durable with positive locking action.• Works with most 3” on center slatwall.• Charcoal gray with pvc coating.
Part #- GRD-SHK-BKdescription- Charcoal Metal “S” Hook
With PVC CoatingCTN QTY- 6
Part #- GRD-J6-BKdescription- Charcoal Large Metal “J”
Hook With PVC CoatingCTN QTY- 6
Part #- GRD-H4L-BKdescription- Charcoal 10” Metal Hook Loop
With PVC CoatingCTN QTY- 6
Part #- GRD-H4SD-BKdescription- Charcoal 4” Metal Double
Hook With PVC CoatingCTN QTY- 6
Part #- GRD-H8SD-BKdescription- Charcoal 8” Metal Double
Hook With PVC CoatingCTN QTY- 6
Part #- GRD-J-BKdescription- Charcoal Small Metal “J” Hook
With PVC CoatingCTN QTY- 6
GARAGE ORGANIZATION
G-348
StaNDaRD DUtY hOOKS All Accessories You Need To Get Organized!
* Not Recommended For Use On Standard Duty Great Wall.
PArT # deSCriPTion CTN QTYgrd-PSd-2Bk Black 2” Plastic Slatwall Hook 12grd-PSd-2Fg Fog Gray 2” Plastic Slatwall Hook 12grd-PSd-2Wh White 2” Plastic Slatwall Hook 12grd-PSd-4Bk Black 4” Plastic Slatwall Hook 12grd-PSd-4Fg Fog Gray 4” Plastic Slatwall Hook 12grd-PSd-4Wh White 4” Plastic Slatwall Hook 12
PArT # deSCriPTion CTN QTYGRD-KB-8BC Brite Chrome 8” Metal Knife Bracket 6GRD-KB-8BK Black 8” Metal Knife Bracket 6GRD-KB-8WH White 8” Metal Knife Bracket 6grd-kB-10BC Brite Chrome 10” Metal Knife Bracket 6grd-kB-10Bk Black 10” Metal Knife Bracket 6grd-kB-10Wh White 10” Metal Knife Bracket 6grd-kB-12BC Brite Chrome 12” Metal Knife Bracket 6grd-kB-12Bk Black 12” Metal Knife Bracket 6grd-kB-12Wh White 12” Metal Knife Bracket 6
PArT # deSCriPTion CTN QTYGRD-EA-S Support Arm For Metal Knife Bracket 4
PArT # deSCriPTion CTN QTYgrd-Sd-1BC Brite Chrome 1” Metal Slatwall Hook 12GRD-SD-4BC Brite Chrome 4” Metal Slatwall Hook 12
PArT # deSCriPTion CTN QTYGRD-SD-HF Brite Chrome Flush Metal Slatwall Hook 12
PArT # deSCriPTion CTN QTYgrd-h5-BC Brite Chrome 5 Hook Metal Bracket 3grd-h5-Bk Black 5 Hook Metal Bracket 3grd-h5-Wh White 5 Hook Metal Bracket 3
GARAGE ORGANIZATION
G-349
.67”
.89”
.63”.79”
End Cap
1.38”
.67” .83”
1.06”
.06”
Joint TrimMouldings
Also See ourAluminum and ABS Slatwall
See Pgs. 142-144
Dealer Program & Volume Discounts available, Please Inquire.
uniQue INTERLOCKING
DESIGN
BlackWhiteAlmond
Maple Woodgrain
Product Features• Strong & Durable.
• Easy to install with seamless construction.
• Color matching screws & mouldings available.
great Wall Panels
Material: PVCPanel Sizes: 1’ x 4’ or 1’ x 8’
3” on center11/16” Thick Panel
* Screws packed 100 pcs. per box
* Must be ordered in full boxes of 8 pcs. x 4 ft. or 4pcs. x 8 ft.* Must be ordered in full carton of 8 pcs.
x 4 ft. or 4pcs. x 8 ft.
Standard Duty- 25 lbs per Sq. Ft. load Capacityheavy Duty- 100 lbs per Sq. Ft. load Capacity
11/16”
PAneLSPArT # deSCriPTion
grW-1x4-Wh 1’ x 4’ White Great Wall PanelgrW-1x4-Bk 1’ x 4’ Black Great Wall PanelgrW-1x4-AL 1’ x 4’ Almond Great Wall PanelgrW-1x4-MP 1’ x 4’ Maple Great Wall PanelgrW-1x8-Wh 1’ x 8’ White Great Wall PanelgrW-1x8-Bk 1’ x 8’ Black Great Wall PanelgrW-1x8-AL 1’ x 8’ Almond Great Wall PanelgrW-1x8-MP 1’ x 8’ Maple Great Wall Panel
PAneLSPArT # deSCriPTion
grW-hd1x4-Wh 1’ x 4’ White Great Wall PanelgrW-hd1x4-Bk 1’ x 4’ Black Great Wall PanelgrW-hd1x4-AL 1’ x 4’ Almond Great Wall PanelgrW-hd1x4-MP 1’ x 4’ Maple Great Wall PanelgrW-hd1x8-Wh 1’ x 8’ White Great Wall PanelgrW-hd1x8-Bk 1’ x 8’ Black Great Wall PanelgrW-hd1x8-AL 1’ x 8’ Almond Great Wall PanelgrW-hd1x8-MP 1’ x 8’ Maple Great Wall Panel
MouLdingSPArT # deSCriPTion
GRW-JNR8-WH 8’ White Joint Trim For Great WallGRW-JNR8-BK 8’ Black Joint Trim For Great WallGRW-JNR8-AL 8’ Almond Joint Trim For Great WallgrW-Jnr8-MP 8’ Maple Joint Trim For Great WallGRW-END8-WH 8’ White End Cap For Great WallGRW-END8-BK 8’ Black End Cap For Great WallGRW-END8-AL 8’ Almond End Cap For Great WallgrW-end8-MP 8’ Maple End Cap For Great Wall
SCREWSPArT # deSCriPTion
grW-2500SCr-Wh 2-1/2”-L White Screw For Great WallgrW-2500SCr-Bk 2-1/2”-L Black Screw For Great WallgrW-2500SCr-AL 2-1/2”-L Almond Screw For Great WallgrW-2500SCr-MP 2-1/2”-L Maple Screw For Great Wall
GREAT WALL SLATWALL SYSTEM
G-350
Create your own custom storage with Rev-A-Shelf’s CSPD Series Acrylic Shelf Organizers. Two sizes, 166mm and 358mm, enables installation between shelves utilizing 32mm system holes.
Acrylic shelf storAGe
Adding functionality to your closet does not have to be complicated. This simple Shoe Rail System is easy to install and features Heavy-Gauge Chrome Rails. It is available in four different lengths, from 17” to 35”.
Keep your jewelry organized and in meticulous condition with the CJD Series jewelry drawer. The CJD-2414 system is easily installed with system holes and features full-extension ball bearing slides, and drawer head mounting capability. Used in coordination with the CJD-IS (Standard) and CJD-IN (Necklace) inserts customizing and care has never been easier. These unique insert designs give you the ability to store larger items like necklaces without tangling and the curved inside radius allows for full accessibility to small items such as earring backs. The CJD-IS and CJD-IN feature easy “drop-in” installation and a soft, velvet flocked covering that protects while providing a stylish background for your precious jewelry.
Four Clips included with every divider
PArt # DescriPtioN DiMeNsioNscsPD-6 Small Divider
w/Clips13-1/2” D x 6-9/16” T
x 1/4” ThickcsPD-14 Large Divider
w/Clips13-1/2” D x14-1/8 T
x 1/4” Thick
PArt # DescriPtioN DiMeNsioNscsr-17cr-10 17” Wire Shoe Rail 17” L x 2-1/4” Hcsr-23cr-10 23” Wire Shoe Rail 23” L x 2-1/4” Hcsr-29cr-10 29” Wire Shoe Rail 29” L x 2-1/4” Hcsr-35cr-10 35” Wire Shoe Rail 35” L x 2-1/4” H
PArt # DescriPtioN DiMeNsioNs fiNishcJD-2414 Drawer Box w/Slides 24” W x 14-3/4” D x 2-1/4” H BlackcJD-24is Jewelry Insert 22” W x 13” D x 1-1/2” H VelvetcJD-24iN Necklace Insert 22” W x 13” D x 1-1/2” H Velvet
cJD-DMB-Kit Door Mount Kit – Black
WOOD & ACRYLIC SHELF STORAGE
CHROME SHOE RAILS
JEWELRY DRAWER
G-351
DouBle wire hAMPer
5CHB-LINER
CH-241419-DM-2
tie rAcK
trc-14cr chrome finish
3” w x 14” D x 2” h
LOCK BUTTON
The Closet essential for all men, Rev-A-Shelf’s Chrome Tie/Belt rack is the obvious choice for keeping up with the important odds and ends. This all-in-one organizer features chrome pegs for up to 20 ties, five belts, four peg-closure beltsand a spacious tray for storing loose items like your wallet, change, watch, jewelry, etc. The TBC Series conveniently pulls out of the closet for easy access on full-extension slides and can be mounted on either the left or right side.
tie & Belt rAcK
• Economical plastic screw mount tie rack
• Holds up to 16 ties• Stay organized! Ties
remain in place until lever is pressed
SIMPLY PRESS IN LEVER TO
ADD OR REMOVE TIE
SHOWN IN BLACK
ALSO AVAILABLE IN CHOCOLATE PEARWOOD
has a 35% restock fee.
The CH-241419-DM-2 Premiere Closet Hamper is 24” W by 19” T and built using the same quality material as their immensely popular 5349 Series waste containers. It features removable double wire baskets, with 2.5 Bushels Capacity, 14” bottom mounted, full-extension slides, SOFT-CLOSE mechanism and is door mountable.
PArt # DiMeNsioNsch-241419-DM-2 24” W x 19” T x 14” D
5chB-liNer Cloth Liner
PArt # colortrc-eDi-BK Blacktrc-eDi-wh Whitetrc-eDi-cP Chocolate Pearwood
tBc-14tcr chrome finish 6”w x 14”D x 5”h
The Reverse Mounting Bracket is one of Rev-A-Shelf’s most versatile creations! Designed so you can utilize the unused space between the wall and the end of the run. The CRMB-12 works with the TRC Series tie rack or most other brands of tie/belt racks.
reverse MouNtiNG BrAcKet
crMB-12cr-5 chrome finish 3-3/4”w x 11”D
WIRE HAMPER, ACCESSORIES, TIE RACK
OPI INTRODUCES “EASY DOES IT” TIE RACK
NEW!
G-352
Rev-A-Shelf is pleased to introduce its innovative Wood Pant & Tie Racks. With three variations, the CWPR comes in a 24” or 30” width and provides space for up to eighteen standard or twelve Big & Tall pants. The CWTR tie rack can hold over 120 ties and the CWPTR features both a pant and tie rack that holds twelve pants and over thirty ties. These patent-pending pullout racks feature full-extension
Rev-A-Shelf’s re-designed Pull-Out Fan Pants Rack features left or right-handed mounting, which is extremely simple using closet system holes; chrome finish and unique details like rubber rings to keep pants from slipping and smooth ends to prevent snagging.
slides, rubber O-Rings to prevent slipping and removable pant rods for ease use. The three varia-tions are made from solid birch-maple and come with a lifetime warranty. Whether you are designing a custom closet or want a custom look, the CWTR provides you with both storage and style.
tie & Belt rAcK
wooD PANt & tie rAcK
Pull out fAN PANts rAcK
FINISH AVAILABLE IN WOOD
Keep your closet manageable and chaos free with Rev-A-Shelf’s Chrome Pull-Out Pants rack. This exceptional closet solution is made of heavy gauge steel with a chrome finish and features distinctive movable fingers for easy access and unparalleled convenience. The PSC Series is available in an 18” width holding 9 pairs of pants and a 24” width holding up to 13 pairs of pants.
Pull out PANts rAcK
FINISH AVAILABLE IN CHROME
The Closet essential for all men, Rev-A-Shelf’s Chrome Tie/Belt rack is the obvious choice for keeping up with the important odds and ends. This all-in-one organizer features chrome pegs for up to 20 ties, five belts, four peg-closure belts and a spacious tray for storing loose items like your wallet, change, watch, jewelry, etc. The TBC Series conveniently pulls out of the closet for easy access on full-extension slides and can be mounted on either the left or right side.
PArt # DescriPtioN DiMeNsioNscwtr-2414-1 24” Tie Rack 24” W x 14” D x 6” HcwPr-2414-1 24” Pant Rack 24” W x 14” D x 6” HcwPr-3014-1 30” Pant Rack 30” W x 14” D x 6” H
cwPtr-3014-1 30” Pant & Tie Rack 30” W x 14” D x 6” H
PArt # DiMeNsioNs fiNishtBc-14tcr 6” W x 14” D x 5” H Chrome
PArt # DescriPtioN DiMeNsioNsPsc-1814cr 9 Pant Capacity 17-1/2 -18-1/8” W x 14” D x 3” HPsc-2414cr 13 Pant Capacity 23-3/4” - 24-1/2” W x 14” D x 3” H
PArt # DescriPtioN DiMeNsioNs fiNishcPrf-16cr-52 Fan Pants Rack See Diagram Chrome
All Wood Items Are Carb Phase II Compliant.
TIE, BELT & PANTS RACKS
G-353
** fiNishes AvAilABle: chrome (cr), satin Nickel (sN) or oil rubbed Bronze
Close-ups are shown in Chrome (CR) and Oil Rubbed Bronze (ORB)
The Rev-A-Shelf CTMB Top Mount Brackets allow you to utilize the CB Series wire baskets in openings that are not the standard 18”, 24”, or 30” widths. Simply mount the brackets to the underside of a shelf and then attach the CB Series basket to the bracket.
FINISH AVAILABLE IN CHROME ctMB toP MouNt
Rev-A-Shelf introduces a breakthrough in design of Closet wire baskets and hampers. Not only did they give the
baskets sleek lines, they also engineered them to perform better than any other basket on the market. Their new patent-pending design installs easily in 32mm applications, and basket removal and re-installation has never been easier. Unlike other baskets on the market, their baskets rest on top of the slides, eliminating the torque twist that is common in other designs. Combine that with the bayonet mounting system and your can see why Rev-A-Shelf is the leader in new product innovation.
PArt # DiMeNsioNs
Pull-out BAsKets - 14” DeeP
cB-181407**-2 18” W x 14” D x 7” HcB-181411**-2 18” W x 14” D x 11” HcB-181418**-2 18” W x 14” D x 18” HcB-241407**-2 24” W x 14” D x 7” HcB-241411**-2 24” W x 14” D x 11” HcB-241418**-2 24” W x 14” D x 18” HcB-301407**-2 30” W x 14” D x 7” HcB-301411**-2 30” W x 14” D x 11” HcB-301418**-2 30” W x 14” D x 18” H
Pull-out BAsKets - 16” DeeP
cB-181607**-2 18” W x 16” D x 7” HcB-181611**-2 18” W x 16” D x 11” HcB-181618**-2 18” W x 16” D x 18” HcB-241607**-2 24” W x 16” D x 7” HcB-241611**-2 24” W x 16” D x 11” HcB-241618**-2 24” W x 16” D x 18” HcB-301607**-2 30” W x 16” D x 7” HcB-301611**-2 30” W x 16” D x 11” HcB-301618**-2 30” W x 16” D x 18” H
Pull-out BAsKets - 20” DeeP
cB-182011**-2 18” W x 20” D x 11” HcB-182018**-2 18” W x 20” D x 18” HcB-242011**-2 24” W x 20” D x 11” HcB-242018**-2 24” W x 20” D x 18” H
PArt # DescriPtioN DiMeNsioNsctMB-18 18” Top Mount Bracket Min. opening 18-1/2”ctMB-24 24” Top Mount Bracket Min. opening 24-1/2”ctMB-30 30” Top Mount Bracket Min. opening 30-1/2”
WIRE BASKETS
G-354
rouND closet roD suPPorts for 1-5/16” rouND roD
• Eight foot length• Wall thickness (5/64”)
AluMiNuM rouND 1-5/16” closet roD
• Screw Mount • 2-3/4” OD Size
• 5mm & 8mm Pins • 1-9/16” OD Size
• Designed to give extra support for longer spans.
Screws sold separately.Use #8 x 3/4” Flathead drywall screw, Part # SCR-8750FHZ, sold on page 267.
rouND 1-5/16” closet roD flANGe with PiNs
rouND ceNter roD suPPorts for 1-5/16” rouND roD
u-flANGe o-flANGe
Screws sold separately.Use #8 x 3/4” Flathead drywall screw, Part # SCR-8750FHZ, sold on page 267.
AluMiNuM ovAl 1-3/16 x 19/32” closet roD
• Eight foot lengths• Wall thickness 1/16”
ovAl closet roD suPPorts for 19/32” ovAl closet roD
• 25/32” x 1-15/16” Size
• Designed to give extra support for longer spans.
ovAl roD ceNter suPPorts for 15mm x 30mm ovAl roD
5mm PiN screw MouNt
Screws sold separately. Use #8 x 3/4” Flathead drywall screw, Part # SCR-8750FHZ, sold on page 267.
Screws sold separately. Use #8 x 3/4” Flathead drywall screw, Part # SCR-8750FHZ, sold on page 267.
PArt # fiNishs84-1516-sB Satin Brasss84-1516-sc Satin Chrome
s84-1516-orB Oil Rubbed Bronze
PArt # DescriPtioN fiNishs84P-1516u-sB U-Flange
w/Pins
Satin Brasss84P-1516u-sc Satin Chrome
s84P-1516u-orB Oil Rubbed Bronzes84P-1516o-sB O-Flange
w/Pins
Satin Brasss84P-1516o-sc Satin Chrome
s84P-1516o-orB Oil Rubbed Bronze
PArt # fiNishs84-1150cs-sB Satin Brasss84-1150cs-sc Satin Chrome
s84-1150cs-orB Oil Rubbed Bronze
PArt # fiNishs84-3015-sB Satin Brasss84-3015-sc Satin Chrome
s84-3015-orB Oil Rubbed Bronze
PArt # MouNtiNG fiNishs84-3015P-sB 5mm
Pins
Satin Brasss84-3015P-sc Satin Chrome
s84-3015P-orB Oil Rubbed Bronzes84-3015s-sB Screw
Mount
Satin Brasss84-3015s-sc Satin Chrome
s84-3015s-orB Oil Rubbed Bronze
PArt # fiNishs84-3015cs-sB Satin Brasss84-3015cs-sc Satin Chrome
s84-3015cs-orB Oil Rubbed Bronze
PArt # DescriPtioN fiNishs84-1516u-sB
U-FlangeSatin Brass
s84-1516u-sc Satin Chromes84-1516u-orB Oil Rubbed Bronzes84-1516o-sB
O-FlangeSatin Brass
s84-1516o-sc Satin Chromes84-1516o-orB Oil Rubbed Bronze
RESIDENTIAL GRADE CLOSET ROD & HARDWARE
G-355
s84-180wall Bracket left endProjection - 3-3/4"
s84-802NPNickel closet rod supportscrew type
s84-170wall Bracket right endProjection - 3-3/4"
s84-190wall Bracket centerProjection - 3-3/4"
s84-160hook
s84-161hook with Bar
s84-250ceiling Bracketend(Adj. Height)1-3/4" Base
s84-260ceiling Bracketcenter(Adj. Height)1-3/4" Base
3-1/4"Closed4-1/4"Opened
3-1/4"Closed4-1/4"Opened
s84-3015cs-BcProjection - 3”
1-1/8” x 9/16” (30mm x 15mm) ovAl eND cAP• Black CDPC with Chrome plated top.• 14 - 19 Gauge.
s58-3015-ch
steel ovAl 1-1/8” x 9/16” (30mm x 15mm) closet roD tuBiNG• Eight & ten foot lengths.• Polished chrome finish.• Use #6 flathead screws.
1-1/8” x 9/16” (30mm x 15mm) fittiNGs
toP MouNt:
For more tubing, see page 123
PArt # GAuGes84-320-8 20 gauges84-320-10 22 gauge
• Nickel Closet Rod Support 32mm System
steel rouND Brite chroMe 5/8” closet roD
• 4 foot lengths.
steel 5/8” u-flANGe for 5mm hole
PArt #s84-803NP
PArt # leNGthA1Bc 48”
STEEL TUBING FOR HANGRAIL,DISPLAYS OR CLOSET APPLICATIONS
G-356
• .080” Wall Thickness.• 1-5/16” Outside Diameter.• 6 Ft. Long Closet Rod.
• .053” Wall Thickness.• 1-5/16” Outside Diameter.• 6 Ft. Long Closet Rod.
• .053” Wall Thickness.• 1-5/16” Outside Diameter.• 6 Ft. Long Closet Rod.
• 6” L Scroll Bracket.
• Shelf/Hang Rod Bracket.
• Size: 11-5/8” W x 10-7/8” H• 12” Overall Depth
• 11-1/4” W x 8” H• Maximum Duty Shelf/Hang
Rod Bracket 500 lbs. Each Load Capacity.
• Deco Backet.• Size: 9” W x 9” H• 10” Overall Depth
• 2-1/2” O & U Flange Set For 1-5/16” Tube.
• O & U Flange Set For 1-5/16” Tube.
• O & U Flange Set For 1-5/16” Tube.
• End Cap For 1-5/16” Tube.
• Scroll Bracket.• Size: 8” W x 8” H.
• Shelf/Hang Rod Bracket.• Size: 12-13/16” W x 11” H.
• O & U Flange Set For 1-5/16” Tube.
• Maximum Duty Shelf/Hang Rod Bracket 500 lbs. Each Load Capacity.
• Size: 11-1/4” W x 8” H
• Scroll Bracket.• Size: 8” W x 8” H.
• .053” Wall Thickness.• 1-5/16” Outside Diameter.• 6 Ft. Long Closet Rod.
• End Caps For 1-5/16” Tube.
• Center Support For 1-5/16” Tube. • Maximum Duty Shelf/ Hang Rod
Bracket 500 lbs Each Load Capacity.
• 11-1/4” W x 8” H
• End Caps For 1-5/16” Tube.
BrAss fiNish BrusheD NicKel fiNish
BroNZe fiNish white ePoxy coAteD fiNish
s84-106-Br
s84-106-BN
s84-1150cs-BB
s84-0495-BN
s84-6146-BN
s84-505-Br
s84-8150-Br
s84-8152-Br
s84-505-BN s84-0017-BN
s84-106-BZ
s84-106-wh-6
s84-8091-wh s84-8091-BZ
s84-0495-BZ s84-505-BZ
s84-0017-BZ
s84-505-wh
s84-0495-wh
s84-0017-wh
s84-6150-wh
STEEL CLOSET ROD & HARDWARE
G-357
BoNussave time with this unique hole pattern
feature
coAt & hAt hooKs• 3” Projection• Matching screws included.
• 2-3/16” Projection• Matching screws included.
• Heavy Duty 4-1/2” O.D.• Brass: 3-3/4” Projection• satin Nickel: 3-9/16” Projection• Matching screws included.
PRODUCT FEATURES:• All new patent pending suspension rail makes quick
work of any installation.• The unique hole pattern allows the installer to quickly
locate all of the stud locations. Simply find the first stud, identify the hole and there will be a stud every time the pattern repeats.
• All metal brackets - cover sold separately.• 286 lb. carrying capacity per wall cabinet.• Left (l) or Right (r) brackets available, please specify when ordering.
White Almond Brown
Rail & Bracket Cover Colors:
PArt # fiNishch-37-Br Bright Brassch-37-ch Bright Chromech-37-sN Satin Nickel
PArt # fiNishch-38-Br Bright Brassch-38-sN Satin Nickel
PArt # fiNishch-39-Br Bright Brassch-39-ch Bright Chrome
susPeNsioN rAil & covers
PArt# DescriPtioNsus-r 8’ Suspension Rail
sus-c-wh White Rail Coversus-c-Al Almond Rail Coversus-c-Br Brown Rail Cover
susPeNsioN rAil BrAcKets & covers
PArt#(sPecify left or riGht) color
sus-B-(l or r) Rail Bracketsus-Bc-wh-(l or r) Bracket Cover-Whitesus-Bc-Al-(l or r) Bracket Cover-Almondsus-Bc-Br-(l or r) Bracket Cover-Brown
CLOSET ACCESSORIES
SUSPENSION RAIL & BRACKETS
G-358
Rev-A-Shelf’s Pull-Down Closet Rod is available in two sizes and features an adjustable rod length to accommodate openings from 18” to 26” (CPDR-1826), 26” to 35” (CPDR-2635) and 35” to 48” (CPDR-3548). The handle is adjustable to accommodate universal design and handicap accessible applications. This Closet Rod will pull down 33” and features a soft-closing mechanism, which will slowly draw the bar back to the upright position. Each unit has a 25 lb. weight capacity.
soft closiNG
Break away from the ordinary with Rev-A-Shelf’s Spiral Clothes Rack. This perfect corner closet solution has a 360º turning radius with an adjustable height of 72-1/2” to 84” and the ability to hand 40 single items of clothing from top to bottom. The SHR-3684 comes complete with a stabilizer bar, post and pivot hardware, and mounting hardware.
FINISH AVAILABLE IN CHROME w/ BLACK
PRODUCT FEATURES:• Side mounted• Telescoping Wardrobe rail will accommodate cabinet widths ranging from 32" to 46"• Constructed of Aluminum & Plastic• Set includes: mounting brackets,
clothes lifter, pull pole, wardrobe rail and screws
• 25 lb. load rating• Must hold the pull pole down for
easy access to clothes
in a chrome finish
PArt # DiMeNsioNscPDr-1826 18” - 26” WcPDr-2635 26” - 35” WcPDr-3548 35” - 48” W
PArt # DescriPtioN DiMeNsioNs fiNish
shr-3684 360° Spiral Clothes Rack
23” W x 72-1/2” - 84” H Chrome
s-lift7
w/Adjustable handle
OPI ECONOMY SERIES:“S-LIFT 7” Wardrobe Lift
SPIRAL CLOTHES RACK
PULL DOWN CLOSET ROD
G-359
RECESS MOUNT IRONING CENTER•Raisedpaneldooravailableinunfinishedoak,mapleorscratchresistantwhite.
•Comeswithastorageshelf,heatshield(forsafeironstorage),sleeveboard(n/aonwhiteunit),swivelironingboard,hookandcover&padset.•WorkswithEU-1electricalunit.•Allinstallationhardwareincluded.•16”Wx47-3/4”Hx7”Doutsidedimensions.•14-1/4”Wx46-1/4”Hx3-1/2”Dcutout.•Boarddimensions47-1/2”x11-1/2”.
Oak Maple White
FOLD OUT IRONING BOARDRev-A-Shelf’sunique
pull-outironingboardcanberetrofittedandfolds
awayneatlyintothespaceofadrawer.Simplyopen,unfold,andtheboardrises
automaticallywithalockingdevicethatkeepstheboardinplaceand
evenwiththecountertop.
CIB-16CR (Closet Model)
SURFACE AREA
WIDTH LENGTH 12” 29-3/8” 305mm 746mm
VIB-20CR (Vanity Cabinet) WIDTH LENGTH 12” 37-1/2” 305mm 953mm
PRODUCT DIMENSIONSCIB-16CR (Closet Model) WIDTH DEPTH14-1/4”-21” 16” 362-534mm 407mm
VIB-20CR (Vanity Cabinet) WIDTH DEPTH14-1/4”-21” 20” 362-534mm 508mm
ELECTRICAL UNIT w/LIGHT
REPLACEMENTS COVERS
•ULlisted.•Bulbnotincluded.• Includeslightfixture,plug&30minutetimer.•Workswithrecessed mountironingcentersonly.•Hardwireunit.
• WorkswithbothSurface&
RecessMount IroningCenters.
Plug
PRODUCT FEATURES:•Built-inmotionsensor•On/offswitch•3AAbatteriesincluded•Pivots
LIGHTING SPECIFICATIONS COLOR TEMPERATURE LUMINESCENCE
Average Rated For100,000Hours
COLOR LUMENSWarm White 27
3000K
CoolWhite
WarmWhite
PureWhite
Easy screw mount bracket (screws included)
Light stays on for 30 secondsonce motion is detected
No WiriNg required!
PART # FINISHIB-400 Oak
IB-400-MP MapleIB-420 White
PART # DESCRIPTION DIMENSIONS FINISHCIB-16CR 16”FoldOutIroningBoard 14-1/2-21”Wx16”Dx4”H Chrome
RAS-CIB-COVER-R-52 ReplacementCover(Closet) – SilverVIB-20CR 20”FoldOutIroningBoard 14-1/2”-21”Wx20”Dx4”H Chrome
RAS-VIB-COVER-52 ReplacementCover(Vanity) – Silver
PART #EU-1
PART # COLORCOV-815-SIL SilverCOV-825-GN GreenPatternCOV-835-BL BluePattern PART #
COLOR TEMP LENGTH
# OF LEDCHIPS
LED-MOTION WarmWhite 10” 9
IRONING CENTERS
NEW!Linear
Material: White Plastic w/
Frosted Lens Cover General DutyLight OutputGeneral DutyLight Output
LED MOTION CLOSET LIGHT
G-360
PULL OUT HAMPER WITH PLASTIC BIN
PULL OUT WIRE HAMPER
(NOTE: CAN BE DOOR MOUNTED WITH OUR #RV-DM-KIT)
(NOTE: CAN BE DOOR MOUNTED WITH OUR #RV-DM-KIT)
PULL OUT POLYMER HAMPER/UTILITY BASKET(NOTE: CAN BE DOOR MOUNTED WITH OUR #RV-DM-KIT)
Full extension slides
Full extension slides
PULL-OUT OR DOOR MOUNT HAMPER W/LIDIndividual Pack Contains:(1) hamper basket, full extension slides and instructions. Fully Assembled.
PART # COLOR DESCRIPTION WEIGHTHPRV-1520-S White 14-1/4” W x 20” D x 19-1/4” H 12 lbs.
PART # COLOR DESCRIPTION WEIGHTHRV-1215S White 11-7/8” W x 18” D x 14-3/4” H 12 lbs.HRV-1220S White 11-7/8” W x 18” D x 19-3/8” H 13 lbs.HRV-1515S White 14-3/4” W x 18” D x 14-3/4” H 13 lbs.HRV-1520S White 14-3/4” W x 18” D x 19-3/8” H 14 lbs.
PART # DESCRIPTIONWEIGHT PER
CARTON
HURV-1512S1.37 cu. ft. utility basket with
frame and full extension slides.14-1/4” W x 11-7/8” H x 18” D.
10 lbs.
HUB-470X8-52 1.37 Cu. Ft. Replacement Basket –
5345-DM-KIT-52 Door Mount Extenders –
PART # DESCRIPTION WEIGHT
PULL-OUT HPRV-1925S19-7/8"W (505mm)
26"H (661mm) 14"D (356mm)
12 lbs.
DOOR MOUNT HPRV-1925DM-S
19-7/8”W (505mm) 26"H (661mm) 14"D (356mm)
13 lbs.
BATHROOM VANITY PULL OUT HAMPERS
G-361
Rev-A-Shelf announces the NEW 3000 Series Stemware & Wine Bottle Racks. The entire collection has been redesigned to provide both durability and elegance, featuring new heavy gauge wire construction and a hidden mounting plate. Ideal for showcasing wine and glass collections. Available in three finishes traditional Chrome, stylish Satin Nickel & beautiful Brass.
3150-11CR 3150-11SN 3150-11BR
3250SN 3250BR
3450-11SN 3150-11CR & 3250BR3450-11CR
Uses: Bars, Kitchens, China Cabinets,
Wall Systems
Clear Acrylic • 8 Ft. Lengths
PART #1120-CL
PART NUMBER DIMENSIONS FINISH
11” STEMWARE
HOLDER
3150-11CR 4-1/4” W x 11” D x 1-1/2” H Chrome3150-11SN 4-1/4” W x 11” D x 1-1/2” H Satin Nickel3150-11BR 4-1/4” W x 11” D x 1-1/2” H Brass
16” STEMWARE
HOLDER
3150-16CR 4-1/4” W x 16” D x 1-1/2” H Chrome3150-16SN 4-1/4” W x 16” D x 1-1/2” H Satin Nickel3150-16BR 4-1/4” W x 16” D x 1-1/2” H Brass
3150-16ORB 4-1/4” W x 16” D x 1-1/2” H Bronze
18” STEMWARE
HOLDER
3150-18CR 4-1/4” W x 18” D x 1-1/2” H Chrome3150-18SN 4-1/4” W x 18” D x 1-1/2” H Satin Nickel3150-18BR 4-1/4” W x 18” D x 1-1/2” H Brass
3150-18ORB 4-1/4” W x 18” D x 1-1/2” H Bronze
DOUBLE BOTTLE RACK
3250CR 4-1/4” W x 9” H x 5/8” Thick Chrome3250SN 4-1/4” W x 9” H x 5/8” Thick Satin Nickel3250BR 4-1/4” W x 9” H x 5/8” Thick Brass
3250ORB 4-1/4” W x 9” H x 5/8” Thick Bronze
11” QUAD STEMWARE
HOLDER
3450-11CR 17” W x 11” D x 1-1/2” H Chrome3450-11SN 17” W x 11” D x 1-1/2” H Satin Nickel3450-11BR 17” W x 11” D x 1-1/2” H Brass
3450-11ORB 17” W x 11” D x 1-1/2” H Bronze
STEMWARE AND WINE RACK COLLECTION
STEMWARE HOLDER
G-362
•Availablein30”,36”and42”widths.• BothstylesareavailableinunfinishedOak,MapleandCherry.
•Metallinerincluded.• Installationinstructionsincluded.• ChimneyblowersandDuctkitssoldseparately.•Chimneycanbetrimmedtofitdifferentheights.•Alder&HickoryAvailable-Pleaseinquire.
MANUAL VENTILATOR
Straight Style
Arched Style
CHIMNEY(Sold
Separately) CHIMNEY(Sold
Separately)
DUCTWORK KIT
Designed for use with VENT07 &VENT08
• Availablein36”&42”widths.• Chimneyallowsfor12”oftrim.• Silvermetalliclinerincluded.• Alderavailable,pleaseinquire.
• 500CFM/8.2sones• StainlessSteelfinish• 2x20watthalogenlamps• Pushbuttoncontrols• Quietcentrifugalblower• Heatsensordetectsexcessiveheat&adjustsautomatically
ARCHED STYLEPART # SPECIES HEIGHT
TOTAL WIDTH
HOOD WIDTH DEPTH
SARAN30-OAK Oak 24-7/8” 32-3/8” 30” 19”SARAN30-MP Maple 24-7/8” 32-3/8” 30” 19”SARAN30-CH Cherry 24-7/8” 32-3/8” 30” 19”
SARAN36-OAK Oak 24-7/8” 38-3/8” 36” 19”SARAN36-MP Maple 24-7/8” 38-3/8” 36” 19”SARAN36-CH Cherry 24-7/8” 38-3/8” 36” 19”
SARAN42-OAK Oak 24-7/8” 44-3/8” 42” 19”SARAN42-MP Maple 24-7/8” 44-3/8” 42” 19”SARAN42-CH Cherry 24-7/8” 44-3/8” 42” 19”
STRAIGHT STYLEPART # SPECIES HEIGHT
TOTAL WIDTH
HOOD WIDTH DEPTH
SSRAN30-OAK Oak 22-7/8” 32-3/8” 30” 20-3/16”SSRAN30-MP Maple 22-7/8” 32-3/8” 30” 20-3/16”SSRAN30-CH Cherry 22-7/8” 32-3/8” 30” 20-3/16”
SSRAN36-OAK Oak 22-7/8” 38-3/8” 36” 20-3/16”SSRAN36-MP Maple 22-7/8” 38-3/8” 36” 20-3/16”SSRAN36-CH Cherry 22-7/8” 38-3/8” 36” 20-3/16”
SSRAN42-OAK Oak 22-7/8” 44-3/8” 42” 20-3/16”SSRAN42-MP Maple 22-7/8” 44-3/8” 42” 20-3/16”SSRAN42-CH Cherry 22-7/8” 44-3/8” 42” 20-3/16”
CHIMNEYPART # SPECIES WORKS WITH HEIGHT WIDTH DEPTH
CHI-30-OAK Oak SARAN30*, SSRAN30* 23-1/2” 11-7/16” 9-11/16”CHI-30-MP Maple SARAN30*, SSRAN30* 23-1/2” 11-7/16” 9-11/16”CHI-30-CH Cherry SARAN30*, SSRAN30* 23-1/2” 11-7/16” 9-11/16”
CHI-36-OAK Oak SARAN36*, SSRAN36* 23-1/2” 17-7/16” 9-11/16”CHI-36-MP Maple SARAN36*, SSRAN36* 23-1/2” 17-7/16” 9-11/16”CHI-36-CH Cherry SARAN36*, SSRAN36* 23-1/2” 17-7/16” 9-11/16”
CHI-42-OAK Oak SARAN42*, SSRAN42* 23-1/2” 23-7/16” 9-11/16”CHI-42-MP Maple SARAN42*, SSRAN42* 23-1/2” 23-7/16” 9-11/16”CHI-42-CH Cherry SARAN42* SSRAN42* 23-1/2” 23-7/16” 9-11/16”
PART # SPECIES HEIGHT WIDTH DEPTHARAN36-OAK Oak 46” 36” 19”ARAN36-MP Maple 46” 36” 19”ARAN36-CH Cherry 46” 36” 19”
ARAN42-OAK Oak 46” 42” 19”ARAN42-MP Maple 46” 42” 19”ARAN42-CH Cherry 46” 42” 19”
DUCTKIT
VENT07
P R O D U C T S
ARTISAN STYLE RANGE HOODS
SIGNATURE SERIES WOOD RANGE HOODS
G-363
•Availablein30”or36”widths.•ClassicstyleavailableinunfinishedAlder,unfinishedRedOak,unfinishedMapleorunfinishedCherry.
•Sandedandreadytofinish.•Producedusingtopqualityhardwoodsand“A”gradeveneers.
•Simpleinstallationinstructionsincluded.•MetallicSilverLinerincluded.•Ventilatorssoldseparately.•Attractiveprofessionalappearance.•Veryquietoperation.•Simplefilterremoval/cleaning.•3yearwarranty.• OmegaseriessuppliedwithGalleyRailpackage.
Designed for use with VENT07 & VENT08
MANUAL VENTILATOR• 390CFM• SilverMetallicfinish• 2x40wattlamps• Quietcentrifugalblowerwith3-Speedslidecontrol• Heatsensordetectsexcessiveheat&adjustsautomatically
CLASSIC SERIESPART # SPECIES WIDTH HEIGHT DEPTH
CLARAN30-RO RedOak 30” 23-1/2” 8-5/16”CLARAN30-MP Maple 30” 23-1/2” 8-5/16”CLARAN30-CH Cherry 30” 23-1/2” 8-5/16”CLARAN30-AL Alder 30” 23-1/2” 8-5/16”CLARAN36-RO RedOak 36” 23-1/2” 8-5/16”CLARAN36-MP Maple 36” 23-1/2” 8-5/16”CLARAN36-CH Cherry 36” 23-1/2” 8-5/16”CLARAN36-AL Alder 36” 23-1/2” 8-5/16”
OMEGA SERIESPART # SPECIES HEIGHT WIDTH DEPTH
OMERAN30-RO RedOak 24” 30” 7-1/4”OMERAN30-MP Maple 24” 30” 7-1/4”OMERAN30-CH Cherry 24” 30” 7-1/4”OMERAN30-AL Alder 24” 30” 7-1/4”OMERAN36-RO RedOak 24” 36” 7-1/4”OMERAN36-MP Maple 24” 36” 7-1/4”OMERAN36-CH Cherry 24” 36” 7-1/4”OMERAN36-AL Alder 24” 36” 7-1/4”
DUCTWORK KIT
DUCTKIT
VENT08
P R O D U C T S
WOOD CANOPY RANGE HOODS
G-364
Spice Rack ModulaR Spice Rack
plate diSplay unit
Wood Spice dRaWeR inSeRt
clear natural Maple Finish w/adjustable Bar
approx. 5” opening from bottom to
top shelf
• Designed to hold even large jars.• Manufactured from maple plywood.• Can be trimmed to size.• 8” Deep x 19” Wide x 10” Tall.• Clear finish.• Simply screws into cabinet back.
• Designed for storage of all types of spice jars. • Produced from Baltic Birch plywood finished
with a durable UV coating.• Four widths available, easily trimmed to
desired size.• Boxed individually.• 2" Height - 19" Depth.
Display treasured china in a fully assembled unit with a tasteful moulding shape and dowels of the same species. Mouldings have trim area of 1-1/2” on each end. Dowels spaced 2” on center.
13-1/16” High x 3/4” Wideplate display unit
note: 3 center dowels on all units are removable for cleaning purposes. they are sent unassembled.
Red oak, cherry or Maple
paRt # SiZeSRW-8 8-3/4"W x 7-1/2"H x 3-1/2"DSRW-11 11-3/4"W x 7-1/2"H x 3-1/2"D
paRt # SiZeMSR-1910 19” W x 10” H
paRt # FiniSH SiZepd-30-Ro Red Oak 30” Lpd-30-Mp Maple 30” Lpd-30-cH Cherry 30” Lpd-36-Ro Red Oak 36” Lpd-36-Mp Maple 36” Lpd-36-cH Cherry 36” L
paRt # WidtHSdi-1319 13"Sdi-1619 16"Sdi-1919 19"
P R O D U C T S
KITCHEN STORAGE
G-365
"tRa-Sta" oRGaniZeR
deep Bin SupeR SuSan
• The perfect solution for cookie sheets, baking trays and muffin pans.
• Four pre-finished maple veneer dividers slide in grooved and pre-drilled top and bottom rails.
• Rails designed to be fastened in multiple locations to accept a variety of pots, pans or lids.
• Easily trimmable to fit any size cabinet.• Dividers: 23-3/4"W x 23-3/4"H, Rails: 3/4"W x 24"L.• Dividers are easily removed for simple cleaning of
the cabinet.• Includes 4 finished dividers and 8 drilled rails.
"tRa-Sta" deep dRaWeR kit
Select Spice SuSan
• Modular & Adjustable allow for organization of pots, pans, lids or plates.
• Three pre-finished 11” x 24” maple dividers.
• 6 pre-drilled mounting rails.• Easily trimmable for
various drawer depths.
PRODUCT FEATURES:• Single shelf unit with bearing.• Solid maple rim.• 12mm multi-directional plywood shelf.• Works great for pots and pans, kitchen appliances & bulk items.• 6" high lip, 30" diameter.• 450 lb. weight capacity.• Cast aluminum bearing featuring ultra smooth movement.
PRODUCT FEATURES:• Fits perfectly in 12"
cabinets.• 1" lip.• Perfect for spices.• Plywood core.• Includes bearing with rubber feet.• Can be moved from cabinet to work area/ no attachment to shelf needed.
paRt #tS-2424
paRt #tS-ddk
paRt # deScRiptionSdFS-30 30" Pie Cut
paRt # deScRiptionSSF-10 10" Spice Susan Single Shelf
P R O D U C T S
KITCHEN STORAGE SOLUTIONS
G-366
REV-A-LOCK™ SECURITY SYSTEM
• Concealed • ChildproofOur Rev-A-Lock™ Security System is a world patented catch & key component system designed to combine the security of a lock with the simplicity of a catch. A magnetic “key” placed on the cabinet door releases the catch. When the magnet is removed, the catch springs back - so when the door is closed...it stays that way.
INSTALLATION INSTRUCTIONS INCLUDED
The lock will install on thicknesses of ½” to 1-9/16” and operate through wood, glass, metal and particle board.All locks are now stan-dard with the patented unlocking device, which enables you to disable the lock for extended periods of time and the extension slug for ap-plications now up to 1-9/16” thick.
CONTAINS: Lifting mechanism only; which locks in both open & closed positions.
21-3/4” depth of swing motion.17-1/8” clearance height of working area when not in use.For 19-1/2” frame cabinets & 20-7/8” frameless cabinets.NEW CHROME FINISHNOTE: Rev-A-Lift requires a full height cabinet in order to come all the way to countertop height. This means no drawer (see drawings below). - SHELF IS NOT INCLUDED.
RECOMMENDED SPRING POSITION FOR VARYING MIXER WEIGHT
0-20 lbs. = 120-30 lbs. = 230-60 lbs. = 3
A Remarkable Unique Idea For Cabinet Safety
PART # DESCRIPTIONSET PER CARTON
WEIGHT PER CARTON
OPL-201 Lock Assembly 25 5.4 lbs.OPL-202 Magnetic Key 25 2.8 lbs.
PART # DESCRIPTION WEIGHTRAS-ML-HDCR Heavy Duty Mixer/Appliance
Lift w/ Built in Shock Dampers 7 lbs.
CABINET SECURITY PRODUCTS
REV-A-LIFT
G-367
FALSE FRONT TIP-OUT TRAY WITH STOPSMOLDED POLYMER TIP-OUT TRAYS
CONTAINS: 2 trays per set, trays w/tabs on both ends.
CONTAINS: Each set has 1 standard and 1 accessory tray and 2 pair of “SELF-HOLDIN”® hinges.Note: For use with 2 fronts on sink base cabinet.
CONTAINS: 36” (915mm) extruded tray, hinges, end caps, adhesive, per pack number.Custom cut trays to length & glue end caps on with Rev-A-Glue (included).
2-1/8” Deep, 3” High in back,1-1/4” High in front
Can be used for either frameless or framed cabinet applications. Opening angle can be adjusted from 45°-90°
FALSE FRONT TIP-OUT TRAY SYSTEM (Std/Acc)
36” TRAY W/HINGES & END CAPS
• Each Polished Stainless Steel Tip-Out Tray comes with a pair of Rev-A-Shelf’s patented Self-Holdin® hinges.
PART # COLOR DESCRIPTIONSET PERCARTON
WEIGHT PERCARTON
6562-11-11-52 White 11” Trays w/Tab Stops (280mm) 1 set .9 lbs.6562-11-15-52 Almond 11” Trays w/Tab Stops (280mm) 1 set .9 lbs.6562-14-11-52 White 14” trays w/Tab Stops (360mm) 1 set 1.1 lbs.6562-14-15-52 Almond 14” Trays w/Tab Stops (360mm) 1 set 1.1 lbs.
PART # COLOR DESCRIPTIONSET PERCARTON
WEIGHT PER CARTON
6572-11-11-52 White 11” std/Acc Trays (280mm) 1 set 2 lbs.
6572-11-15-52 Almond 11” std/Acc Trays (280mm) 1 set 2 lbs.
6572-14-11-52 White 14 1/4” std/Acc Trays (362mm) 1 set 2.3 lbs.
6572-14-15-52 Almond 14 1/4” std/Acc Trays (362mm) 1 set 2.3 lbs.
PART # COLOR DESCRIPTIONSET PERCARTON
WEIGHT PER CARTON
6551-36-11-52 White 1 Tray - 2 pr. Hinges & End Caps 1 set 2 lbs.
6551-36-15-52 Almond 1 Tray - 2 pr. Hinges & End Caps 1 set 2 lbs.
6551-36-11-50 White 1 Tray - 1 pr. Hinges & End Caps 1 set 1.5 lbs.
6551-36-15-50 Almond 1 Tray - 1 pr. Hinges & End Caps 1 set 1.5 lbs.
PART # DESCRIPTION
6552-ETH-10 Euro HingeFalse Front Hinge
PART # DESCRIPTION6581-10-52 10” Tray (250mm)6581-11-52 11-1/4” Tray (280mm)6581-13-52 13” Tray (330mm)6581-14-52 14-1/4” Tray (360mm)6581-16-52 16” Tray (400mm)6581-19-52 19” Tray (480mm)6581-22-52 22” Tray (559mm)6581-25-52 25” Tray (635mm)6581-28-52 28” Tray (711mm)6581-31-52 31” Tray (788mm)
POLISHED STAINLESS STEELTIP-OUT TRAYS
CHROME PLATEDEURO HINGES
SINK FRONT (TIP-TOP) TRAY PRODUCTS
EXTRUDED TIP-OUT TRAYS
G-368
WOOD SPICE DRAWER INSERT
• Contains one wood tray insert that can be customized for various drawer sizes.
COMBINATION KNIFE HOLDER/CUTTING BOARD
• Contains knife rest, cutting board, full extension Accuride slides, mounting hardware and screws (knives not included).
WOOD KNIFE BLOCK WITH DIVIDERSRev-A-Shelf’s unique 4WKB-1 Knife Block Tray Insert is out of the box ready at 18-1/2” x 22” providing 19 slots to store knives and has a separate compartment for other utensils.
PART # DIMENSIONS4SDI-18 16” W x 19-3/4” L x 1-1/2” D4SDI-24 22” W x 19-3/4” L x 1-1/2” D
PART # DIMENSIONS4KCB-18 14-1/2” W x 22-3/4” L x 4-3/4” H4KCB-21 17-1/2” W x 22-3/4” L x 4-3/4” H4KCB-24 20-1/2” W x 22-3/4” L x 4-3/4” H
PART # DIMENSIONS4WKB-1 18-1/2” W x 22” L x 2-7/8” H
All Wood Items Are Carb Phase II Compliant.CUTLERY TRAYS
G-369
RT10-* RT12-* RT14-* RT18-*
• All cutlery trays are made of rubberized polystyrene to allow easy trimming for a perfect fit in any drawer. This single drawer insert is available in white or almond colors.
• All tray heights are 2-3/8”
SPECIFICATION: DRAWER CLEARANCEShallow System Requires 3-1/8” mi. clearance Base is 1-5/8” deep
Deep System Requires 4-1/8” mi. clearance Base is 2-7/16” deep
Top Rolling Tray
Base Tray
3-1/8” (80mm)1-5/8”
(42mm)
Top Rolling Tray
Base Tray
4-1/8”
2-7/16”
BONUS TRIMMABLE
Increase space in kitchen drawers with Rev-A-Shelf’s rolling tray system.The following notes apply to all rolling tray systems:• For the full cutlery tray systems to
provide adequate accessibility to the utensils in the lower tray, a portion of the drawer back must be removed. No depth trimming of the lower utility tray will be necessary.
• Minimum height refers to the cabinet drawer opening, not just the depth of the drawer.
• Rolling tray systems are available in a glossy white finish only.• Made of heavy gauge Polystyrene.• Features a removable rolling cutlery tray.
CT-2W-10 CT-4W-10CT-1W-10 CT-3W-10
SHALLOW TRAY SYSTEM 3-1/8” HIGHPART # TRAY SIZE MINIMUM TRIMRT10-3F 11-3/4” W x 21-1/4” D 8-3/4” W x 21-1/4” DRT12-3F 14-1/2” W x 21-1/4” D 11-3/4” W x 21-1/4” DRT14-3F 17-3/4” W x 21-1/4” D 14-3/4” W x 21-1/4” DRT18-3F 21-3/4” W x 21-1/4” D 17-3/4” W x 21-1/4” D
DEEP TRAY SYSTEM 4-1/8” HIGHPART # TRAY SIZE MINIMUM TRIMRT10-4F 11-3/4” W x 21-1/4” D 8-3/4” W x 21-1/4” DRT12-4F 14-1/2” W x 21-1/4” D 11-3/4” W x 21-1/4” DRT14-4F 17-3/4” W x 21-1/4” D 14-3/4” W x 21-1/4” DRT18-4F 21-3/4” W x 21-1/4” D 17-3/4” W x 21-1/4” D
PART # COLOR TRAY DIMENSIONS MINIMUM TRIM SIZECT-1A-10 Almond 11-1/2” W x 21-1/4” D 8-5/8” W x 17-3/4” DCT-1W-10 White 11-1/2” W x 21-1/4” D 8-5/8” W x 17-3/4” DCT-2A-10 Almond 14-1/4” W x 21-1/4” D 11-5/8” W x 17-3/4” DCT-2W-10 White 14-1/4” W x 21-1/4” D 11-5/8” W x 17-3/4” DCT-3A-10 Almond 17-1/2” W x 21-1/4” D 14-3/4” W x 17-3/4” DCT-3W-10 White 17-1/2” W x 21-1/4” D 14-3/4” W x 17-3/4” DCT-4A-10 Almond 21-7/8” W x 21-1/4” D 18-3/8” W x 17-3/4” DCT-4W-10 White 21-7/8” W x 21-1/4” D 18-3/8” W x 17-3/4” D
ROLLING TRAY SYSTEM
CUTLERY TRAYS
G-370
• All utility trays are made of rubberized polystyrene to allow easy trimming for a perfect fit in any drawer.• All tray heights are 2-3/8”.
UT-*-52
UT-1011-1/2”293mm
21-1
/4” (
540
mm
)
Min. Trim Size8-5/8” x 17-3/4”
219 mm x 451 mm
UT-1214-3/4”362 mm
21-1
/4” (
540
mm
)
Min. Trim Size11-5/8” x 17-3/4”
296 mm x 451 mm
UT-1517-1/2”445 mm
21-1
/4” (
540
mm
)
Min. Trim Size14-3/4” x 17-3/4”
375 mm x 451 mm
UT-1821-7/8”556 mm
21-1
/4” (
540
mm
)
Min. Trim Size18-3/8” x 17-3/4”
467 mm x 451 mm
• Keep spices conveniently stored in a drawer with this tiered configuration polymer spice tray. Trays are 50” x 21” trimmable to any size.
• Universal Spice Trays are best utilized with 22” slides for maximum accessibility.• Need a minimum of 4-1/2” clearance for height.
NOTE: All polymer bread drawer cover kits includes 1 cover, 1 pair rails and screws. Cover is textured to hide scratches. Can be trimmed to accommodate any drawer dimension.
ST50-21WH
BDC-24-11BDC-200-20 PART # COLOR MAXIMUM DIMENSIONS MINIMUM DRAWER SIZE
BDC-200-15 Almond 16-3/4” W x 21-3/4” L 11-5/8” x Any LengthBDC-200-11 White 16-3/4” W x 21-3/4” L 11-5/8” x Any LengthBDC-200-20 Translucent 16-3/4” W x 21-3/4” L 11-5/8” x Any LengthBDC-24-15 Almond 20-1/8” W x 21-3/4” L 16-1/16” x Any LengthBDC-24-11 White 20-1/8” W x 21-3/4” L 16-1/16” x Any LengthBDC-24-20 Translucent 20-1/8” W x 21-3/4” L 16-1/16” x Any Length
PART # COLOR TRAY DIMENSIONS MINIMUM TRIM SIZEUT-10A-52 Almond 11-1/2” W x 21-1/4” D 8-5/8” W x 17-3/4” DUT-10W-52 White 11-1/2” W x 21-1/4” D 8-5/8” W x 17-3/4” DUT-12A-52 Almond 14-1/4” W x 21-1/4” D 11-5/8” W x 17-3/4” DUT-12W-52 White 14-1/4” W x 21-1/4” D 11-5/8” W x 17-3/4” DUT-15A-52 Almond 17-1/2” W x 21-1/4” D 14-3/4” W x 17-3/4” DUT-15W-52 White 17-1/2” W x 21-1/4” D 14-3/4” W x 17-3/4” DUT-18A-52 Almond 21-7/8” W x 21-1/4” D 18-3/8” W x 17-3/4” DUT-18W-52 White 21-7/8” W x 21-1/4” D 18-3/8” W x 17-3/4” D
PART # COLOR TRAY SIZEST50-21A-52 Almond 50” W x 21” DST50-21W-52 White 50” W x 21” D
UTILITY TRAYS
UNIVERSAL SPICE TRAYS
BREAD DRAWER COVERS
G-371
WOOD CUTLERY TRAYS• Both of the wood cutlery trays are trimmable to fit.
TRIMMABLE UTILITY TRAY INSERT
Organize kitchen drawers with Rev-A-Shelf’s new Wood Utility Try Insert. The WUT Series is made of classic birch/maple hardwood with a UV-cured clear finish to ensure an acceptable match to any kitchen cabinet. This modern day clutter solution requires a simple drop-in installation with two sizes that may be trimmed to fit.
• Smaller height for shallow drawers.
Note: Our door storage trays are packaged with screw-in clips. Mounting standards are separate - Part # 6232-26-4528-52
2 & 5 SHELF SETS WITH CLIPS DOOR STORAGE SHELF SETS
PART # TRAY SIZE
4WCT-1 14-5/8” W (min trim 8-3/4”) x 22 L (min trim 15-1/2”) x 2-7/8” H
4WCT-3 20-5/8” W (min trim 14-3/4”) x 22 L (min trim 15-1/2”) x 2-7/8” H
4WCT-1SH 14-5/8” W (min trim 8-3/4”) x 22 L (min trim 15-1/2”) x 2-3/8” H
4WCT-3SH 20-5/8” W (min trim 14-3/4”) x 22 L (min trim 15-1/2”) x 2-3/8” H
PART # COLOR DESCRIPTIONSET PERCARTON
WEIGHT PER
CARTON6232-08-11-52 White 7-7/8” (200mm) Wide Polymer w/ Screw-In Clips 1 1 lbs.6232-08-15-52 Almond 7-7/8” (200mm) Wide Polymer w/ Screw-In Clips 1 1 lbs.6232-14-11-52 White 13-3/4” (349mm) Wide Polymer w/ Screw-In Clips 1 2 lbs.6232-14-15-52 Almond 13-3/4” (349mm) Wide Polymer w/ Screw-In Clips 1 2 lbs.6232-20-11-52 White 19-3/4” (502mm) Wide Polymer w/ Screw-In Clips 1 3 lbs.6232-20-15-52 Almond 19-3/4” (502mm) Wide Polymer w/ Screw-In Clips 1 3 lbs.6235-08-11-52 White 7-7/8” (200mm) Wide Polymer w/ Screw-In Clips 1 2.4 lbs.6235-08-15-52 Almond 7-7/8” (200mm) Wide Polymer w/ Screw-In Clips 1 2.4 lbs.6235-14-11-52 White 13-3/4” (349mm) Wide Polymer w/ Screw-In Clips 1 4 lbs.6235-14-15-52 Almond 13-3/4” (349mm) Wide Polymer w/ Screw-In Clips 1 4 lbs.6235-20-11-52 White 19-3/4” (502mm) Wide Polymer w/ Screw-In Clips 1 5 lbs.6235-20-15-52 Almond 19-3/4” (502mm) Wide Polymer w/ Screw-In Clips 1 5 lbs.
6232-26-4528-52 Aluminum 26” Mounting Standards 1 1lbs.
PART # DIMENSIONS4WUT-1 18-1/2” W x 22” D x 2-7/8” H4WUT-3 24” W x 22” D x 2-7/8”H
4WUT-1SH 18-1/2” W x 22” D x 2-3/8” H4WUT-3SH 24” W x 22” D x 2-3/8” H
All Wood Items Are Carb Phase II Compliant.DOOR & CABINET ORGANIZERS
G-372
Top shelves are 2-3/8” D; Bottom Shelf is 4-1/8” D -
21-3/8” H
DOOR MOUNT SPICE RACKS
PULL OUT TOWEL BARPULL OUT TOWEL BAR CONTAINS: 1- pull out towel bar, 3 prong model with 12” (305mm) extension with mounting screws. 5” width (127mm) x 17-3/4” depth (451mm) x 1-1/4” (32mm).
CONTAINS: Tray divider with three (3) screw-in clips & fasteners per set. Both trays dividers are 20” deep (508mm).
TRAY DIVIDERS W/CLIPS
TOWEL HOLDER CONTAINS: Towel holder w/mounting screws. 12-3/4” width (324mm) x 3-1/2” depth (89mm) x 6-1/2” height (165mm).
TOWEL HOLDER
TOWEL HOLDER
CONTAINS: 1- pull out towel bar, 2 prong model, easy glide ball bearing slide with mounting screws. 3-7/8”W x 12-7/8”D x 1-1/2”H
U-SHAPED TRAY DIVIDERS
W/SCREWS
TRAY DIVIDER/FOIL WRAP HOLDERBaking storage has never been more versatile than with the 447 Pullout Organizer. Designed for 9” and 12” base cabinets, these organizers feature two compartments for storing baking sheets and platters and the removable center racks allow you the ability to store larger platters and bake ware if desired. The unit is made from maple and glides on our patented “tri-slides” for stability. Door mounting is a breeze with our patented door mount brackets that provide up to 5 inches of flexibility for trouble free installation on any door style.
PART # DESCRIPTIONSET PERCARTON
WEIGHT PER CARTON
565-10-52 10 5/8” Width Spice Rack (270mm) 1 2.2 lbs.
565-14-52 13 5/8” Width Spice Rack (346mm) 1 2.4 lbs.
PART # DESCRIPTIONSET PERCARTON
WEIGHT PER CARTON
563-47 3 Prong Towel Bar-White 1 2 lbs.
563-47C 3 Prong Towel Bar-Chrome 1 2 lbs.
PART # COLOR DESCRIPTIONWEIGHTPER PC.
597-12-10 White 12” High Tray Dividers (305mm) 2 lbs.597-12CR-10 Chrome 12” High Tray Dividers (305mm) 2 lbs.
597-18-10 White 18” High Tray Dividers (457mm) 2 lbs.597-18CR-10 Chrome 18” High Tray Dividers (457mm) 2 lbs.
PART # DESCRIPTIONSET PER CARTON
WEIGHT PER CARTON
563-32 Towel Holder, White 1 .4 lbs.563-32C Towel Holder, Chrome 1 .4 lbs.
PART # DESCRIPTIONSET PER CARTON
WEIGHT PER CARTON
563-51-C 2 Prong Towel Bar-Chrome 1 2.6 lbs.
PART # DIMENSIONS FINISH
WEIGHT PER
CARTON596-10CR-52 3”W x 11-7/8”D x 10”H Chrome 2 lbs.
PART # DESCRIPTIONWEIGHT
PER CARTON447-BC-5C 5” Foil Wrap Holder/Tray Divider 25 lbs.447-BC-8C 8” Foil Wrap Holder/Tray Divider 32 lbs.
All Wood Items Are Carb Phase II Compliant.DOOR & CABINET ORGANIZERS
G-373
Revolutionize the way you store your pots, pans, and lids with the Two-Tier Cookware Organizer. The 5CW2 features independently operating shelves that accommodate a
COOKWARE ORGANIZER
variety of cookware sizes and brands. The top tier organizes lids and the bottom tier features adjustable dividers to store a variety of larger pots and pans. These beautiful organizers are designed for Base 15 or 24 cabinets. They are made with a heavy-duty chrome plated wire frame and feature 100 lbs. rated full extension ball-bearing slides. The bottom, side and rear mounting provide you the sturdiness you expect and easy installation. Door mounting is also an option with the RV Series Door Mounting Kit.
PART # CABINET WIDTH DEPTH HEIGHT WEIGHT5CW2-1222-CR BASE 15 11-3/4”
(299mm)22”
(559mm)18”
(457mm) 29 lbs.
5CW2-2122-CR BASE 24 20-3/4”(527mm)
22”(559mm)
18-1/8”(460mm) 39 lbs.
RVDM17KIT --- --- --- ---- 2 lbs.
PREMIER CHROME WIREKITCHEN STORAGE
G-374
Our 548-06 system makes storing 2 liter bottles simple and accessible. This system is designed for base 9 cabinets.• Features universal brackets for right or left hand mounting.• Ball Bearing slides and a door mountable wire frame in
white or chrome.
2”(51mm)
4”(102 mm)
19-3/8”(492 mm)5-1/2”
(492 mm)
19-1/2”(496 mm)
548-06CR
PULL-OUT ORGANIZERS (side mount)5432-05CR - Turn that small space found in a base 9 cabinet into useful storage with this new modern, 2 shelf pull out. It is designed with aluminum shelves and chrome rails. This sleek organizer features a bottom bracket and an adjustable side mount bracket to provide unparalleled stability. This system has a door mountable frame and comes with full extension soft close slides.
5432-05CR
Bottom Bracket
Side Bracket
UNDER SINK CHROME BASKETCleaning just got easier with the Under Sink Caddy. Now you can store multiple cleaning items in one place and carry them with you with the removable caddy. The unique handle adjusts to accommodate plumbing fixtures and the reversible/removable top tray is ideal for paper towel or sponge storage.
Shown in combination with 5333-33CR side mounted.
Seven dividers for sauce pans or lids. Large basket space for larger pots. Larger unit has a large divider section for baking pans, cutting boards and Soft Close Slide.
COOKWARE ORGANIZER
PART # COLOR DESCRIPTION548-06 White 5-1/2” W x 19-3/8” D x 19-1/2” H
548-06CR Chrome 5-1/2” W x 19-3/8” D x 19-1/2” H
PART # DESCRIPTION
5432-05CR 2 Tier Chrome/Aluminum5-3/8” x 22-1/4 D x 23-1/8” H
PART # DESCRIPTION WEIGHT
544-10C-1 Undersink Chrome Basket11-1/4” W x 16-1/4” D x 19-1/2” H 4.5 lbs.
PART # CABINET WIDTH DEPTH HEIGHT WEIGHT
5389-21CR BASE 24 20-1/8”(512mm)
22”(559mm)
9-1/2”(232mm) 19 lbs.
5389-33CR BASE 36 32-1/8”(816mm)
22”(559mm)
9-1/2”(232mm) 23 lbs.
WIRE ACCESSORIES
PREMIER CHROME WIRE KITCHEN STORAGE
G-375
BASE & WALL FILLER ORGANIZERS WITH STAINLESS PANELSThe fillers feature full-extension ball bearing slides, black accessory hooks and pegs and stainless steel panels that provide endless storage customizing from storing pots and pans, cleaning accessories, various cooking utensils, keys, craft supplies and much more.
BASE UNITS
WALL UNITS
One side features adjustable shelvesOne side features
stainless steel panels
434-BF-6SS 434-WF-6SS
433-BF-9C
This product by Rev-A-Shelf takes blind corner organization to a whole new level! The blind corner optimizer front baskets pull-out, then slide over to allow the rear baskets to be pulled out for total access to the items stored within.
5PSP-15-CR 5PSP-15-CR 5PSP-15-CR
15” Min. Cabinet Width opening • 20-1/4” Min. Inside Cabinet Depth • 21” Cabinet Height Opening
Unit contains frame with 4 chrome baskets, 100 lb rated full extension, ball bearing slides, and hardware.Easy installation to the cabinet floor. Can be used for left or right corner.
MAdE OF BIRCH/MAPLE HARdWOOd UV CUREd WITH CLEAR FINISH
PART # dESCRIPTION dIMENSIONS434-BF-3SS 3” Filler Organizer 3” W x 23” D x 30” H434-BF-6SS 6” Filler Organizer 6” W x 23” D x 30” H433-BF-9C 9” Filler Organizer 9” W x 23” D x 30” H
PART # dESCRIPTION dIMENSIONS434-WF-3SS 3” Perforated Filler
Organizer 3”W x 11-1/8”D x 30”H
434-WF-6SS 6” Perforated Filler Organizer 6”W x 11-1/8”D x 30”H
434-MB-KIT 434 Message Board - comes with eraser, markers and marker holder
PART # dESCRIPTION dIMENSIONS5PSP-15-CR Blind Corner Optimizer 26-1/4” (667mm) W x 20-1/4” (514mm) D x 21” (533mm) H
WOOD KITCHEN STORAGE
5PSP CR SERIESCHROME BLIND CORNER OPTIMIZER
All Wood Items Are Carb Phase II Compliant
G-376
Create a functional storage space behind those decorative panels with the new base and wall filler cabinets. Rev-A-Shelf created the whole cabinet that transforms decorative fillers into functional storage pullouts. The 432 Series is available for 3”, 6” and 9” base and wall cabinet applications and features adjustable shelves with chrome rails and full-extension ball bearing slides. Cabinet face not included.
432-BF-3C
432-BF-6C
432-WF-3C
432-WF-6C
BASE CABINET & WALL FILLER PULL-OUT SHELVES
Introducing the Wood Classic Adjustable Shelf Pull-Out with chrome rails designed for base 9”, 12”, 15” and 18” cabinets. The 448 series features our technologically advanced patent pending “tri-slides” for complete stability and adjustable door mount brackets providing up to 5” of flexibility for trouble-free installation on any door style. Shelves are adjustable.
PULL-OUT SHELVING SYSTEM
NEW TRI- SLIDE(patent pending)
NEW ADJUSTABLEDOOR MOUNT
BRACKETS
Installation is easy. From the underside of the cabinet simply screw
the wood block to the bottom of the cabinet for complete stability
MAdE OF BIRCH/MAPLE HARdWOOd UV CUREd WITH CLEAR FINISH
PART # dESCRIPTION dIMENSIONS
BASE UNITS
432-BF-3C 3” Filler Organizer 3” W x 23” D x 30” H432-BF-6C 6” Filler Organizer 6” W x 23” D x 30” H432-BF-9C 9” Filler Organizer 9” W x 23” D x 30” H
PART # dIMENSIONS448-BC-5C 5” W x 22-1/2” D x 25-1/2” H448-BC-6C 6-1/2” W x 22-1/2” D x 25-1/2” H448-BC-8C 8” W x 22-1/2” D x 25-1/2” H448-BC-11C 11” W x 22-1/2” D x 25-1/2” H448-BC-14C 14” W x 22-1/2” D x 25-1/2” H
PART # dESCRIPTION dIMENSIONS
WALL UNITS
432-WF-3C 30” Tall 3” Filler Organizer 3” W x 11-1/8” D x 30” H432-WF-6C 30” Tall 6” Filler Organizer 6” W x 11-1/8” D x 30” H
432-WF36-3C 36” Tall 3” Filler Organizer 3” W x 11-1/8” D x 36” H432-WF36-6C 36” Tall 6” Filler Organizer 6” W x 11-1/8” D x 36” H432-WF39-3C 39” Tall 3” Filler Organizer 3” W x 11-1/8” D x 39” H432-WF39-6C 39” Tall 6” Filler Organizer 6” W x 11-1/8” D x 39” H432-WF42-3C 42” Tall 3” Filler Organizer 3” W x 11-1/8” D x 42” H432-WF42-6C 42” Tall 6” Filler Organizer 6” W x 11-1/8” D x 42” H
WOOD KITCHEN STORAGEAll Wood Items Are Carb Phase II Compliant
G-377
WOOd SINK BASE dOOR STORAGE
• Available for sink base sizes 30”, 36”, & 42” and features a removable polymer tray on the top shelf with new adjustable door mount brackets that provide installation flexibility up to 5”.
Plastic Inserts Included
Cloth liner included
Contains door rack, vegetable oil treated cutting board & mounting screws. Overall height is 16-3/4”.
dOOR MOUNT
BASE WICKER BASKET
dOOR MOUNT POLYETHYLENE CUTTING BOARd
This 4DMBC features a stylish wood and chrome support rack and an easy to clean, abrasive resistant, hygienic, non-stick Polyethylene cutting board.
MAdE OF BIRCH/MAPLE HARdWOOd UV CUREd WITH CLEAR FINISH
PART # dIMENSIONS4SBSU-15 10-1/2” W x 5” D x 18-1/2” W 4SBSU-18 13-1/2” W x 5” D x 18-1/2” W4SBSU-21 16-1/2” W x 5” D x 18-1/2” W
PART # dESCRIPTION WEIGHT
4WB-15
BASE 15 WICkER BASkET max. inside width: 12-7/8” - 14-5/8”
11-1/4”W (286 mm) x 7-7/8”H (200 mm) x 21-1/4”D (540 mm)
Individual Pack: Contains (1) Wicker Basket, 2 side mount rails and
1 plastic liner.
5 lbs
4WB-18
BASE 18 WICkER BASkETmax. inside width: 15-7/8” - 17-5/8”
14-1/4”W (362 mm) x 7-7/8”H (200 mm) x 21-1/4”D (540 mm)
Individual Pack: Contains (1) Wicker Basket, 2 side mount rails and 1
plastic liner.
7 lbs
4WB-411-4WICkER BASkET SET -
4 PC. MInIMUMSet includes: (1) 4-1/2”W x 11-1/4”D
x 4-1/2”H basket and cloth liner.3.3 lbs.
4WB-421-4WICkER BASkET SET -
4 PC. MInIMUMSet includes: (1) 4-1/2”W x 21-1/4”D
x 4-1/2” H basket and cloth liner.4.1 lbs.
4WB-1419-52WICkER BASkET
Includes: (1) 14-1/2”W x 19-1/4”D x 11-1/4” H basket and cloth liner.
6 lbs.
4WB-1723-52WICkER BASkET
Includes: (1) 17-1/2”W x 22-3/4”D x 11-1/4”H basket and cloth liner.
7.5 lbs.
PART # dESCRIPTION WEIGHT4dMCB-15 RACk: 9-1/2”W x 8”H x 3”D
BOARD: 7-7/8”W x 16”L x 1-1/4”D 7 lbs.
4dMCB-18 RACk: 12-1/2”W x 8”H x 3”DBOARD: 10-7/8”W x 16”L x 1-1/4”D 10 lbs.
PART # dESCRIPTIONMINIMUM OPENING
4dMCB-15P RACk: 12-1/4”W x 8”H x 2”DBOARD: 9-3/4”W x 15-3/4”H x 5/8” D 13-1/2”
4dMCB-18P RACk: 15-3/4”W x 8”H x 2”DBOARD: 13-3/8”W x 15-3/4”H x 5/8”D 16-1/2”
EXTRA CLEAR PLASTIC LINERS
PART #WORKS
W/ PART#:WBI-15-10 4WB-15WBI-18-10 4WB-18
WOOD KITCHEN STORAGEAll Wood Items Are Carb Phase II Compliant
G-378
dOOR MOUNT SPICE RACK
InSIDE SHELF WIDTH8-3/8”11-3/8”14-3/8”
Depth 2-5/8”
9-5/8”12-5/8”15-5/8”
21-1/2”
3-1/8”Back View of adjustable brackets
4SR-18
MAdE OF BIRCH/MAPLE HARdWOOd UV CUREd WITH CLEAR FINISH
Patented Adjustable Mounting Brackets ensure that your doors are not damaged
Designed for 15”, 18” and 21” Wall cabinets this beautiful wood organizer brings your foil and storage bags within easy reach while freeing up valuable drawer and pantry space. Made from maple with chrome rails it is ideal for any decor and the patented adjustable mounting brackets ensure easy installation on various door styles.
VERTICAL FOIL RACK
• Contains door mount spice rack and four screws.
• Height between reaches is 8-5/8”.
AdJUSTABLE dOOR MOUNT SPICE RACK4ASR-18
• Contains 3 adjustable shelves, 2 slotted standards and mounting screws standards are 3/4” W x 22” H x 3/4”D .
Standards3/4” W x
3/4” D x 25” H
Rack Width10-1/8”13-1/8”16-1/8”
Overallw/Standard 4”Shelf 3-5/8”Inside Rack Depth 2-1/4”
Inside Rack Width8-3/4”11-3/4”14-3/4”
3-5/8”Inside Rack
Height203/32”
Our storage organizers include patented brackets that offer up to an extra 5” of mounting adjustability. The AMB attachment is designed to extend mounting options to the thick portion of the door increasing installation flexibility and eliminating the need for sub-door panels.
Up to 5” of adjustability, just loosen screws,
adjust, then retighten.
US PATEnT nO: 7,204,569
PART # dIMENSIONS4SR-15 9-5/8” W x 3-1/2” D x 21-1/2” H4SR-18 12-5/8” W x 3-1/8” D x 21-1/2” H4SR-21 15-5/8” W x 3-1/8” D x 21-1/2” H
PART # dESCRIPTION dIMENSIONS
MINIMUM CABINET OPENING WEIGHT
4WFR-15-1 Vertical Foil Rack for 15” Cabinet 10-1/8” W x 4” D x 8” H 11” 2.5 lbs.4WFR-18-1 Vertical Foil Rack for 18” Cabinet 13-1/8” W x 4” D x 8” H 13-3/4” 3 lbs.4WFR-21-1 Vertical Foil Rack for 21” Cabinet 16-1/8” W x 4” D x 8” H 16-5/8” 3.5 lbs.
PART # dIMENSIONS4ASR-15 10-1/8” W x 4” D x 25” H4ASR-18 13-1/8” W x 4” D x 25” H4ASR-21 16-1/8” W x 4” D x 25” H
PART # dESCRIPTION4ASR-31STd-20 31” Door Mount Spice Rack Standards4ASR-37STd-20 37” Door Mount Spice Rack Standards
WOOD KITCHEN STORAGEAll Wood Items Are Carb Phase II Compliant
G-379
This double 15 quart dark gray polymer pull-out waste container features built in handles for easy removal and is nestled in a heavy gauge chrome wire frame. The 5469 series features 18” bottom mount full extension self closing slides and door mount brackets.
NOTE: Minimum inside cabinet width is 14-1/4” Minimum opening width is 13-3/4” Minimum opening height is 15-7/8”
5349-18DM-2 5349-18DM-217 5349-18-DM-2SS
5349-1527DM-2 5349-1527DM-217 5349-2150DM-217 5349-2150DM-2
Rev-A-Shelf’s ground breaking Soft-Open/Soft-Close Rev-A-MotionTM waste containers are now available in an innovative Top-Mount application. The front, side and rear adjustable mounting brackets provide stability and easy installation. These products are constructed of solid maple and available in two sizes, Single 50 Qt. (for 18” full height base cabinets) and a Double 50 Qt. (for 21” full height base cabinets). They feature pre-assembled door mount brackets for easy one-step operation and rear adjustable mounting brackets for stability and easy installation.
Additional mending plate for frameless applications
Unique adjustable bracket is designed for 1-1/2”, 1-5/8”, and 1-3/4” face frame applications and will adapt to frameless construction.
Rev-A-Motion Slide system provides 8” of assisted opening and closing.
FITS INSET DOORS
CONCEAlED SlIDES!
with Rev-A-Motion
PART # DESCRIPTION DIMENSIONS5349-18DM-2 Two 35 qt. white polymer containers (plastic) 14-7/8” W x 22” D x 19-1/2” H
5349-18DM-217 Two 35 qt. Metallic silver polymer containers (plastic) 14-7/8” W x 22” D x 19-1/2” H5349-18-DM-2SS Two 32 qt. Stainless steel containers 14-7/8” W x 22” D x 19-1/2” H5349-1527DM-2 Two 27 qt. white polymer containers (plastic) 11-5/8” W x 22-3/4”D x 19-1/8” H
5349-1527DM-217 Two 27 qt. metallic silver containers (plastic) 11-5/8” W x 22-3/4”D x 19-1/8” H5349-2150DM-217 Two 50 qt. metallic silver polymer containers (plastic) 15-5/8” W x 22” D x 23-1/8” H5349-2150DM-2 Two 50 qt. white polymer containers (plastic) 15-5/8” W x 22” D x 23-1/8” H
PART # DESCRIPTION5469-15DM-2CR 14” W x 18” D x 15-3/4” H
PART # DESCRIPTION WEIGHT4WCTM-RM-1850DM-1 Single 50 Qt. Containers
15-1/4” W x 21-3/4” D x 21-3/4” H 20 lbs.
4WCTM-RM-2150DM-2 Double 50 Qt. Containers18-1/4” W x 21-3/4” D x 21-3/4” H 24 lbs.
DOUBLE PULL-OUT WASTE CONTAINERS
TOP MOUNT PULL-OUT WASTE CONTAINERS
WASTE CONTAINER LIDS
G-380
RV SERIES PRICE lIST AND DESCRIPTION
PART # DESCRIPTIONRV-35-lID-1 35 QT. Waste Container lid-White
RV-35-lID-17-1 35 QT. Waste Container lid-Metallic SilverRV-35-lID-18-1 35 QT. Waste Container lid-Black
RV-50-lID-1 50 QT. Waste Container lid-WhiteRV-50-lID-17-1 50 QT. Waste Container lid-Metallic Silver
PART # DESCRIPTIONWEIGHT
PER CARTONRV-12KD-17CS 10-5/8”W x 22”D x 19-1/4”H Single 35 Qt. Waste Container-w/full extension 12 lbs.RV-15KD-17CS 11-13/16”W x 22-1/4”D x 19-1/8”H Double 27 Qt. Containers-w/full extension 14 lbs.
RV-1024W 27 Qt. Replacement Container - 11-3/8”W x 11-3/8”D x 17-3/4”H –RV-18KD-17CS 14-3/8”W x 22”D x 19-1/4”H Double 35 Qt. Waste Container-w/full extension 15 lbs.
RVDM17KIT Heavy Duty Door Mount Kit in Metallic Silver (Includes Euro Adapter Kit) 2 lbs.
PART # DESCRIPTIONWEIGHT
PER CARTON
A
RV-814PB 8-7/8”W x 15-5/8”D x 15-7/8”H Single 20 Qt. Waste Container 6 lbs.RV-20-52WH 20 Qt. Replacement Container - 8-3/8” W x 14-1/4” D x 15” H –
RV-9PB 9-1/2”W x 22”D x 19-1/2”H Single 30 Qt. Waste Container 9.5 lbs.6700-61-52 30 Qt. Replacement Container - 9-3/8” W x 15-3/8” D x 17-7/8” H –RV-9PBS 9-1/2”W x 22”D x 19-1/2”H Single 30 Qt. Waste Container w/full extension 9.5 lbs.RV-12PB 10-5/8”W x 22”D x 19-1/4”H Single 35 Qt. Waste Container 10 lbs.RV-35-52 35 Qt. Replacement Container - 14-7/8” W x 10-1/2” D x 17-7/8” H –
RV-12PBS 10-5/8”W x 22”D x 19-1/4”H Single 35 Qt. Waste Container w/full extension 10 lbs.
PART # DESCRIPTIONWEIGHT
PER CARTONB RV-12PBl 10-5/8”W x 22”D x 20-3/8”H Single 35 Qt. Waste Container w/lid 10 lbs.
PART # DESCRIPTIONWEIGHT
PER CARTON
C RV-12PB-50 11-1/4”W x 22”D x 23-1/4”H Single 50 Qt. Waste Container 10 lbs.RV-50-52 50 Qt. Replacement Container - 11-1/4” W x 15-5/8” D x 21-5/8” H –
PART # DESCRIPTIONWEIGHT
PER CARTON
D RV-14PB-S 14-5/8”W x 16”D x 16-3/8”H Single 20 Qt. Waste Container 11 lbs.RV-20-52WH 20 Qt. Replacement Container - 8-3/8” W x 14-1/4” D x 15” H –
PART # DESCRIPTIONWEIGHT
PER CARTON
E RV-18PB-1 14-7/8”W x 22”D x 19-1/4”H Single 35 Qt. Waste Container 13 lbs.RV-35-52 35 Qt. Replacement Container - 14-7/8” W x 10-1/2” D x 17-7/8” H –
PART # DESCRIPTIONWEIGHT
PER CARTON
F RV-18PB2-S 14-3/8”W x 22”D x 19-1/4”H Double 35 Qt. Waste Container w/full extension 14 lbs.RV-35-52 35 Qt. Replacement Container - 14-7/8” W x 10-1/2” D x 17-7/8” H –
SINGLE PULL-OUT WASTE CONTAINERS
WASTE CONTAINER LIDS
WASTE CONTAINERS WITH FULL EXTENSION SLIDES
G-381
RV SERIES
RV-DM KITAll RV series waste containers can be attached to the cabinet door for an easy one step process with the heavy-duty door mount kit. This system is considered the best in the industry with a six way adjustable door-mounting bracket for easy installation and simple job site adjustments. The RV-DM kit includes a complete set of brackets, fasteners and spacers for installation on any door style eliminating the need for a sub door panel.
THIS KIT CAN BE ADDED TO All RV SERIES WASTE BINS AND HAMPERS
CONTAINS:2- Product Members, 1- set-door brackets (1 left & 1 right),2- 1/4” x 1/2” bolts, 2- 1/4” x 1/2” bolts w/washers, 4- #10 x 1/2” truss head screws, 4-nylock nutsSpacer Kit:2- 1/2” x 1” bolts, 2- 1/4” x 1” bolts w/washers, 4- 3/8” spacers
Feature: RV-DMBrackets can be adapted to any door application without need for sub-door.
* RV-8PB requires Euro Adapter Kit. Part #RVEUROADAPTORKIT52
A B C D
E F F RV-12PBS W/RV-DM-KIT
has a 35% restock fee.
This popular waste container series is available in a variety of sizes to accommodate almost any cabinet space. Regarded as the best in the industry, the RV Series features a heavy-duty wire frame construction; 3/4 or full-extension ball bearing slides and easy bottom mount installation with just four screws. These durable pull-out waste containers are packaged fully assembled and carry the standard Rev-A-Shelf lIFETIME GUARANTEE.
PART # DESCRIPTION FINISHSETS PER CARTON
WEIGHT PER CARTON
RV-DM-KIT Heavy Duty door mount kit White Enamel 1 2 lbs.RVEUROADAPTORKIT52 Euro Slide adapter kit for RV-8PB -- 1 1 lb.
SINGLE PULL-OUT WASTE CONTAINERS
G-382
It’s all about the smooth sliding system with the 5349 Series. This assortment of single and double stainless steel or polymer waste containers features heavy-duty brushed aluminum Soft Close Slides that provide exceptional support and stability eliminating thatside-to-side movement and a fully adjustable door mount frame.
Introducing Rev-A-Shelf’s newest addition to the waste container family, the stainless steel sink base pull-out waste container. Ideal for kitchen, vanity and wet bar sink base cabinets. Made to fit conveniently in the limited spaces around existing plumbing. Features two separate stainless steel containers (one 10 liter bin and one 20 liter bin), a covered lid, built in handles for easy removal, full extension ball bearing slides and is available with or without a door mountable frame.
5349-15DM-1 5349-1550DM-15349-15DM-117 5349-1550DM-117
8-785-30-2SS 8-785-30-DM2SS
Contains: Mounting frame, full-extension slides, lid, 2 containers and screws. 8-785-30-DM2SS includes a door mount bracket.
5349-2150DM-2175349-15DM-1SS
PART # DESCRIPTION5349-15DM-1 One 35 qt. white polymer container (plastic)
10-3/4”W x 22”D x 19-1/2”H
5349-15DM18-1 One 35 qt. white polymer container (plastic)10-3/4”W x 18”D x 19-1/2”H
5349-15DM-117 One 35 qt. Metallic Silver polymer container (plastic)10-3/4”W x 22”D x 19-1/2”H
5349-15DM18-117 One 35 qt. Metallic Silver polymer container (plastic)10-3/4”W x 18”D x 19-1/2”H
5349-1550DM-1 One 50 qt. white polymer container (plastic)11-1/4”W x 22”D x 22-3/4”H
5349-1550DM-117 One 50 qt. Metallic Silver polymer container (plastic)11-1/4”W x 22”D x 22-3/4”H
5349-15DM-1SS One 32 qt. Stainless Steel container11-1/4”W x 22”D x 19-1/2”H
5349-15DM18-1SS One 32 qt. Stainless Steel container11-1/4”W x 18”D x 19-1/2”H
5349-2150DM-217 Double 50 qt. Metallic Silver Polymer Container14-13/16”W x 22-1/8”D x 22-15/16”H
PART # DESCRIPTION8-785-30-2SS Under Sink Mount Waste Container
10-1/4” W x 18-3/4” D x 15-3/16” H8-785-30-DM2SS Door Mount Under Sink Waste Container
10-1/4” W x 18-3/4” D x 15-3/16” H
STAINLESS STEEL UNDER THE SINK MOUNTWASTE CONTAINER
SINGLE PULL-OUT WASTE CONTAINERS
G-383
Made from solid wood construction, the Top Mount Pull-Out Waste Containers are available in a single 35 qt. and 50 qt., double 27 qt., double 35 qt. and 50 qt. variety. The 4WCTM Series is designed for absolute sturdiness with front side mounting, rear adjustable mounting brackets for variances in cabinet depth, pre-assembled door mounting brackets and full-extension 150 lbs. rated over-travel-slides.In addition, the single waste container system includes a short polymer bin that provides an extra storage space for garbage bags.
FULLY ASSEMBLED Contains: 1, 2 or 4 container(s), full-extension slides,
and built in door mount brackets4WCTM-27-4 is not a door mount unit.
Made from solid wood construction, the Bottom Mount Pull-Out Waste Containers are available in a single 35 qt. or double 35 qt. variety. The 4WC Series encases the containers in a durable wood base at the bottom of the cabinet to allow easy retrieval of the polymer waste bins and features full-extension ball bearing slides with pre-assembled door mount brackets.
4WC-15DM-1 4WC-18DM-2
4WCTM-12DM-1 4WCTM-18DM-24WCTM-1550DM-1 4WCTM-15DM-2
4WCTM-27-4
4WCTM-2150DM-2
Use for custom face frame installations
PART # DESCRIPTION4WCTM-12DM-1 one 35 qt. container
12”W x 17-7/8”H x 22”D
4WCTM-1550DM-1one 50 qt. container & small polymer bin
18”W x 21-3/4”H x 22-5/8”D(door mount)
4WCTM-15DM-2 two 27 qt. containers12”W x 17-3/4”H x 22-7/8”D
4WCTM-18DM-2 two 35 qt. containers15”W x 17-7/8”H x 22”D
4WCTM-2150DM-2 two 50 qt. containers18”W x 21-3/4”H x 22-13/16”D
4WCTM-27-424”W x 22-13/16”D x 18”H
top mount wood frame, full extension slides4 x 27 Qt. Container
RV-1024W 27 Qt. Replacement Container Only11-3/8”W x 11-3/8”D x 17-3/4”H
RV-35-52 35 Qt. Replacement Container Only14-3/8”W x 15-3/8”D x 17-7/8”H
RV-50-52 50 Qt. Replacement Container Only11-1/4”W x 15-5/8”D x 21-5/8”H
PART # DESCRIPTION WEIGHT
4WCTM-SP-KIT 1-1-/2”W x 22-1/4”D x 2-7/16”HWood Finish 5 lbs.
PART # DESCRIPTION4WC-15DM-1 one 35 qt. container set
11-1/4”W x 19-1/4”H x 21-3/4”D4WC-18DM-2 two 35 qt. containers set
14-1/4”W x 19-1/4”H x 21-3/4”DRV-35-52 35 Qt. Replacement Container
14-1/4” W x 10-1/2” D x 17-7/8” H
PULL-OUT WASTE CONTAINERSBOTTOM MOUNT SERIES
TOP MOUNT SERIES
SPACER KIT
All Wood Items Are Carb Phase II Compliant