origami swan instructions and diagrams
TRANSCRIPT
7/27/2019 Origami Swan Instructions and Diagrams
http://slidepdf.com/reader/full/origami-swan-instructions-and-diagrams 1/12
Origami Swan Instructions and Diagrams
The origami swan is an absolutely beautiful work of art. I'm not talking about my folding here, which
is pretty beautiful in itself ;), but the way the swan actually looks like its real life counterpart is
amazing.
There are some trick folds, but nothing outrageous that will make you give up if you follow the
instructions carefully.
Follow the steps below to make this Origami Swan.
Difficulty: Medium
Step 1: Start with a square piece of origami paper.
If you only have regular 8.5x11 paper, follow these
instructions tomake a square sheet.
Step 2: Take the top corner and fold it over to the
bottom corner.
Step 3: Fold the left corner over to the right.
7/27/2019 Origami Swan Instructions and Diagrams
http://slidepdf.com/reader/full/origami-swan-instructions-and-diagrams 2/12
Step 4: With the flap you just folded with, open it
up and crease the left and right sides so you can
flatten it. The top corner should fold down to the
bottom corner
Step 5: Turn the paper over so we can repeat it on
the other side.
Step 6: Take the left flap and open it up, then
crease the left and right sides so the top corner can
meet the bottom corner.
Your paper should look like the 3rd picture in this
step
7/27/2019 Origami Swan Instructions and Diagrams
http://slidepdf.com/reader/full/origami-swan-instructions-and-diagrams 3/12
Step 7: Take the left and right corners of the top
layer and fold it to meet at the middle.
Step 8: Fold the top triangle down.
Click "Next" to continue making the origami swan.
Origami Swan Instructions Page 2
Step 9: Unfold the top, left, and right triangle
flaps.
7/27/2019 Origami Swan Instructions and Diagrams
http://slidepdf.com/reader/full/origami-swan-instructions-and-diagrams 4/12
Step 10: Open the top layer from the bottom
and lift it all the way up. Use the creases on
the sides as guides to fold the sides in.
Step 11: Turn the figure over so we can do the
same on the other side.
Step 12: Fold the left and right corners in from
the bottom to the center
7/27/2019 Origami Swan Instructions and Diagrams
http://slidepdf.com/reader/full/origami-swan-instructions-and-diagrams 5/12
Step 13: Unfold.
Step 14: Basically repeat Step 10. Lift up the
top layer from the bottom and fold in the sides.
Step 15: Fold down the flap you just lifted up.
7/27/2019 Origami Swan Instructions and Diagrams
http://slidepdf.com/reader/full/origami-swan-instructions-and-diagrams 6/12
Step 16: Turn the figure over.
Origami Swan Instructions Page 3
Step 17: Like before, fold down the top flap. You
should end up with this shape in the picture.
Step 18: Fold down the top part of the triangle to
meet at the crease.
Step 19: Unfold.
Step 20: Open up the figure from the bottom.
7/27/2019 Origami Swan Instructions and Diagrams
http://slidepdf.com/reader/full/origami-swan-instructions-and-diagrams 7/12
Step 21: Turn the paper over so you're looking at it
from the top.
Step 22: Here's the tricky fold. First, flatten the peak
at the top, then use all the creases available in that
square to invert it. Afterwards, flatten the figure like
you see in the third picture in this step.
Step 23: Turn the figure upside down.
Origami Swan Instructions Page 4
7/27/2019 Origami Swan Instructions and Diagrams
http://slidepdf.com/reader/full/origami-swan-instructions-and-diagrams 8/12
Step 24: Fold the top flap down.
Step 25: Turn the figure over.
Step 26: Like Step 24, fold down the top flap.
Step 27: Let's work on the tail. Fold the right flap
down, but tilt it right a little so that the edge on
the right side of the flap line up with the edge of
the base.
Step 28: Unfold.
7/27/2019 Origami Swan Instructions and Diagrams
http://slidepdf.com/reader/full/origami-swan-instructions-and-diagrams 9/12
Step 29: Inside reverse fold the tail. To do this,
slightly open the right side of the figure like you
see in the first picture in this step.
Next, tuck the tail inside the opening like the
second picture.
Lastly, close the opening back and crease.
Step 30: Take a portion of the tail and do another
inside reverse upwards like in the picture.
Origami Swan Instructions Page 5
Step 31: Now for the wings. Fold the bottom flapdiagonally up like in the picture. The right edges of the
wing should line up when you fold it.
7/27/2019 Origami Swan Instructions and Diagrams
http://slidepdf.com/reader/full/origami-swan-instructions-and-diagrams 10/12
Step 32: Fold the bottom corner of the wing up to line up
with the crease in the middle of the wing.
Step 33: Unfold the bottom corner.
Step 34: Do an inside reverse fold to that corner.
Step 35: Repeat steps 31 - 34 on the other wing. Once
you're done, it should look like this.
Step 36: The neck is pretty thick so we'll fold it inwards.
Crease it well so the thick neck stays inside.
7/27/2019 Origami Swan Instructions and Diagrams
http://slidepdf.com/reader/full/origami-swan-instructions-and-diagrams 11/12
Step 37: Make the head by doing an inside reverse fold.
Origami Swan Instructions Page 5
Step 38: Open the head from the top and fold a part of the beak
back.
Step 39: Now fold a part of the beak forward extending pass the
head.
Step 40: Fold the beak and the head, creasing well.
7/27/2019 Origami Swan Instructions and Diagrams
http://slidepdf.com/reader/full/origami-swan-instructions-and-diagrams 12/12
Step 41:Make the swan more realistic by adding a curve to the neck.
Just fold a part of the neck in to curve it.
Step 42: Fold the bottom left corner of the swan's body inwards to
give it a more rounded look. That's it. Good job! Ain't she a beauty?
Click on "Like" below if you like this swan!