OSHA 10/30 Hour Construction Course

OSHA 10/30 Hour Construction Course

Test/Answers

OSHA was established in what year? __1970_____

1. Name the OSHA Priority of Inspections. IDLH,FAT/CAT,Complaints(formal/non formal), Repeat, Referral, High Risk________________________________________

2. What is the 5 (a) (1) General Duty Clause of OSHA?_To assure every working man/woman employment that is free from recognized hazards that are likely to cause death/or serious physical Harm, and to preserve our most precious natural resources ________________________________

3. If a Corporation or Company has a Fatality or

4. Catastrophe, how much time is required before it has to be reported? _____8 hours_______

5. What is the Fall protection height for platforms or walkways in construction?____6 Feet_________________

6. What is the fall protection height limitation on scaffolding in construction?

7. What does PEL mean? Permissible Exposure Limit_____________

8. What does TWA mean?_Time Weighted Average___________

9. 10. What does TLV mean_Threshold Limit Value___________

10. What does IDLH mean?__Immediately Dangerous to Life or Health__________

11. What is ANSI?_____American National Standards Institute________________

12. What is DOT____Department of Transportation__________________

13. What is EPA_Environmental Protection Agency_____________________

14. What is NEC__National Electrical Code___________________

15. What is CGA____Compressed Gas Association________________

16. What is NFPA___National Fire Protection Agency________________

17. What is ASME__American Society of Mechanical Engineers________________

18. Does the OSHA electrical standard have a 5 (a) (1) General Duty Clause within its standard? ___Yes___________

19. Give the definition for a Competant Person? ________________