our class camera! bodylens lcd screen viewfinder built-in microphone record button zoom settings...
TRANSCRIPT
Our Class Our Class
Camera!Camera! BodyLens
LCD Screen
Viewfinder
Built-in microphone
Record Button
Zoom
Settings menu
Power Source
Ports/Jacks
Hard Disk Drive
Whit
e B
ala
nce
Whit
e B
ala
nce
Page 84Page 84
The white balance will adjust
The white balance will adjust
automatically. If you would like to
automatically. If you would like to
manually set the white balance is
manually set the white balance is
by touching the LCD screen,
by touching the LCD screen,
framing a white object to fill the
framing a white object to fill the
screen touch the screen
screen touch the screen
button . This button will flash
button . This button will flash
quickly and the white balance has
quickly and the white balance has
been adjusted and stored.
been adjusted and stored.
1. White Balance Menu 2. Click ONE Push Film white paper
Click and allow to flash
Manual Focus
Manual Focus Adjustments
Adjustments
Page 82Page 82
Touch Manual from the LCD screen
Touch Manual from the LCD screen
under video. F2 appears. Touch
under video. F2 appears. Touch
the button the looks like a person
the button the looks like a person
next to an arrow to get a close up
next to an arrow to get a close up
of the subject. Press the button
of the subject. Press the button
with the picture of a arrow and a
with the picture of a arrow and a
mountain to focus on the subject
mountain to focus on the subject
far away. This will allow you to
far away. This will allow you to
focus. When the picture of the
focus. When the picture of the
person or mountain is visible the
person or mountain is visible the
focus cannot be adjusted farther
focus cannot be adjusted farther
away. Touch OK to set it.
away. Touch OK to set it.
Click Manual Focus
For close ups of subjects
For Distant subjects
Setting Up Audio Equipment Check List
4. Set the levels: Have your talent speak in the tone 4. Set the levels: Have your talent speak in the tone of voice for the scene. Adjust the audio levels of voice for the scene. Adjust the audio levels accordingly. Make sure the audio from the meter accordingly. Make sure the audio from the meter bounces between -12dB and -6dB. Check to make bounces between -12dB and -6dB. Check to make sure your audio will not peak and that it will pick up sure your audio will not peak and that it will pick up your talent and not the ambient noise. your talent and not the ambient noise.
5. Monitor the Audio: During the filming, keep an 5. Monitor the Audio: During the filming, keep an eye on the levels. Use headphones to listen to the eye on the levels. Use headphones to listen to the audio to make sure it sound good. Donaudio to make sure it sound good. Don’’t just rely on t just rely on the levels. the levels.
Audio Troubleshooting 1. Check Batteries 1. Check Batteries
2. Check to see if the microphone is in the mute settings.2. Check to see if the microphone is in the mute settings.
3. Check the connections!3. Check the connections!
4. Check the microphone settings. Levels could be set too 4. Check the microphone settings. Levels could be set too lowlow
5. 5. Hearing Interference? Hearing Interference? Try changing the frequency on the Try changing the frequency on the microphone or switch to a wired lav.microphone or switch to a wired lav.
6. 6. Is there a buzzing in the audio? Is there a buzzing in the audio? An audio cable may be An audio cable may be crossed with a power cable or it may be too close to crossed with a power cable or it may be too close to electrical equipment. Check cables. electrical equipment. Check cables.
Post-Production
Use editing to place your footage in order.
Clip unwanted footage out!
Add music
Voice Over
Graphics
Text