outcome 4 safety requirements for working with gases and heat producing equipment unit 201: health...
TRANSCRIPT
![Page 1: Outcome 4 Safety requirements for working with gases and heat producing equipment Unit 201: Health and safety in building services engineering](https://reader030.vdocuments.net/reader030/viewer/2022032707/56649e435503460f94b36096/html5/thumbnails/1.jpg)
Outcome 4
Safety requirements for working with gases and heat producing
equipment
Unit 201: Health and safety in building services engineering
![Page 2: Outcome 4 Safety requirements for working with gases and heat producing equipment Unit 201: Health and safety in building services engineering](https://reader030.vdocuments.net/reader030/viewer/2022032707/56649e435503460f94b36096/html5/thumbnails/2.jpg)
Gases
Bottle gas Cylinder colour Thread direction
Propane Red Left hand
Butane Blue Left hand
MAPP (mix) Yellow Left hand
Acetylene Maroon Left hand
Oxygen Black Right hand
![Page 3: Outcome 4 Safety requirements for working with gases and heat producing equipment Unit 201: Health and safety in building services engineering](https://reader030.vdocuments.net/reader030/viewer/2022032707/56649e435503460f94b36096/html5/thumbnails/3.jpg)
Oxyacetylene equipment
• Main control valve• Pressure regulator• Gauges• Flashback arrestor• Hoses• Torch• Torch control valve• Nozzle.
![Page 4: Outcome 4 Safety requirements for working with gases and heat producing equipment Unit 201: Health and safety in building services engineering](https://reader030.vdocuments.net/reader030/viewer/2022032707/56649e435503460f94b36096/html5/thumbnails/4.jpg)
LPG equipment
• Liquefied Petroleum Gas: a group of gases that includes propane and butane
• Highly flammable when mixed correctly with air• Heavier than air• Propane turns from liquid to gas at -420C• If drawn off too quickly, the valves can freeze• Used and stored in well-ventilated and signed areas• LPG can build up in confined spaces• When in use, a CO2 fire extinguisher must be present.
![Page 5: Outcome 4 Safety requirements for working with gases and heat producing equipment Unit 201: Health and safety in building services engineering](https://reader030.vdocuments.net/reader030/viewer/2022032707/56649e435503460f94b36096/html5/thumbnails/5.jpg)
Gas equipment
Visually inspect equipment:
• Damage to hoses• Damage to valves• Damage to gauges• Damage to threaded connectors• Leak detection fluid on joints.
![Page 6: Outcome 4 Safety requirements for working with gases and heat producing equipment Unit 201: Health and safety in building services engineering](https://reader030.vdocuments.net/reader030/viewer/2022032707/56649e435503460f94b36096/html5/thumbnails/6.jpg)
GasStore the cylinder upright, outside, in a well-ventilated lockable store, with labels.
•If transporting gas, keep cylinders upright with ventilation, in an enclosed vehicle, and label on outside•If transporting quantities of gas, the driver must be in possession of a Tremcard. Covered by Carriage of Dangerous Goods by Road Regulations.
![Page 7: Outcome 4 Safety requirements for working with gases and heat producing equipment Unit 201: Health and safety in building services engineering](https://reader030.vdocuments.net/reader030/viewer/2022032707/56649e435503460f94b36096/html5/thumbnails/7.jpg)
Dangers
• LPG in cellars• Stored near drain entrances• Flammable• Flames in loft areas – dust and insulation• Build up of CO2 or CO in confined spaces• Burns to property and persons – nozzle and component• Cold burns from valve and cylinder• Leaks.
![Page 8: Outcome 4 Safety requirements for working with gases and heat producing equipment Unit 201: Health and safety in building services engineering](https://reader030.vdocuments.net/reader030/viewer/2022032707/56649e435503460f94b36096/html5/thumbnails/8.jpg)
FiresFire is one of the most destructive elements.
Combustion is a chemical reaction with oxygen ie:
Fuel + oxygen + heat = firePropane + oxygen + spark = flame
![Page 9: Outcome 4 Safety requirements for working with gases and heat producing equipment Unit 201: Health and safety in building services engineering](https://reader030.vdocuments.net/reader030/viewer/2022032707/56649e435503460f94b36096/html5/thumbnails/9.jpg)
Fires
Class A Solids – wood, paper, plastic
Class B Flammable liquids – oil, paraffin
Class C Flammable gases – LPG, natural gas
Class D Metals – aluminium, magnesium
Class E Electrical
Class F Cooking oils and fats
![Page 10: Outcome 4 Safety requirements for working with gases and heat producing equipment Unit 201: Health and safety in building services engineering](https://reader030.vdocuments.net/reader030/viewer/2022032707/56649e435503460f94b36096/html5/thumbnails/10.jpg)
Fire extinguishers
Care should also be taken when using CO2 extinguishers in an enclosed space – asphyxiation
![Page 11: Outcome 4 Safety requirements for working with gases and heat producing equipment Unit 201: Health and safety in building services engineering](https://reader030.vdocuments.net/reader030/viewer/2022032707/56649e435503460f94b36096/html5/thumbnails/11.jpg)
Fire extinguishers
RED WATER A
CREAM FOAM A & B
BLUE POWDER B & Elec
BLACK CO2 Elec
![Page 12: Outcome 4 Safety requirements for working with gases and heat producing equipment Unit 201: Health and safety in building services engineering](https://reader030.vdocuments.net/reader030/viewer/2022032707/56649e435503460f94b36096/html5/thumbnails/12.jpg)
Fires• Carry a dry powder or CO2 extinguisher when soldering• Use a heatproof mat next to building fabrics (resistant)• Move furniture away from soldering area• Do not point a blowtorch directly at combustible material• When soldering under a suspended floor, check for
anything that could catch fire• Do not replace floorboards until you have inspected for
smouldering under the boards• When lead welding on a roof, damp off the substrate• Stop soldering an hour before you leave.