outdoor furniture - technical documentation...erlau outdoor furniture technical documentation |...
TRANSCRIPT
Erlau Outdoor FurnitureTechnical Documentation | Table of contents
Benches
02 Alpha03 Artesit04 Avenida16 Charisma05 Esplanade06 Melody07 Molero08 Piazza10 Salto12 Schwarzwald13 Siesta14 Stella16 Strada18 Viamona
Seats and seating systems
19 Allegro, stainless steel21 Allegro, steel23 Allegro-Vario23 Arena25 Enano26 Exposit40 Intersit28 Multi, steel29 Multi, stainless steel45 Olympia Nova53 Swingo30 Topsit-Pagwood®
31 Topsit, wire mesh32 Topsit, perforated plate34 Topsit-Pagwood® backless35 Topsit, wire mesh, backless36 Topsit, on trapezoid frame38 Topsit-Vario
Loungers, chairs, stackable benches and tables
54 Bornholm55 Elba56 Florenz57 Mensa Nova55 Offenburg56 Omega58 Parador56 Rothenburg 57 Tabula Nova 58 Tivoli56 Triberg
Bicycle parking systems
59 Arcodos60 Berlin61 Pedalo63 Pedalo Hi-Lo65 Velofox67 Veloport
Planters
68 Lunaflor69 Planta
Bollards | Leaning post
70 Arcus74 Metro72 Unisono
Litter bins
75 Cambio83 Community84 Smoky84 Splash83 Topsy76 Vasura
Renovation and replacement
85 Olympia88 Replica
Warming column
90 Brasero
ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Bitte bei Bestellungen zusätzlich die gewünschte Standardfarbe tannengrün, rubinrot, graphitschwarz, ultramarinblau, weißaluminium, graualuminium oder reinweiß angeben. Weitere Farben auf Anfrage.
02
AlphaALPHA BenchFlat steel laser-cut side-frames, separate wire-mesh seat and backparts, 15 x 30 mm mesh pattern, wire gauge 3.5 mm. Feet of 38mm round tube in ALPHA-form, fully galvanized and RILSANpolyamide coated, (min. thickness 350 microns). With four broadstripes of denser mesh to indicate the seating spaces and for extrastrength.
ALPHA features:One-piece combined feet and armrest design. Can be bolted/doweled to the ground/into foundations.
Dimensions: (W x D x H) 1980 x 610 x 800Type movable / fixed
ALPHA Pagwood® benchFlat steel section laser-cut side-frames, separate Pagwood® slattedseat and back parts. Feet of 38 mm round tube in ALPHA-form,fully galvanized and RILSAN polyamide coated, (min. thickness350 microns).
ALPHA features:One-piece combined feet and armrest design. Can be bolted/dow-eled to the ground/into foundations.
Dimensions: (W x D x H) 1980 x 610 x 800Type movable / fixed
Benches
When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Technische Änderungen vorbehalten.
Benches03
We reserve the right to alter specifications without notice.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Artesit
ARTESIT benchSeat section galvanized and RILSAN polyamide coated (min. thick-ness 350 microns), moulded concrete block supports, ground andsand-blasted to give anthracite finish. 38 mm diameter tubular steel seat frame, wire mesh seat and backrest, 15 x 15 mm meshpattern, wire gauge 3.0 mm, seat height 450 mm.
ARTESIT features:Supporting stone blocks can be positioned horizontally or vertically.
Option 1Seat length 1800 mm, asymmetric backrest. Asymmetrical sloping of the ends, length 2000 mm.
Dimensions: (W x D) 2190 x 620 mm
Order no. 51563
Option 2Seat length 2400 mm, symmetric backrest. Symmetrical sloping of both ends, length 2400 mm.
Dimensions: (W x D) 2400 x 605 mm
Order no. 51567
Bitte bei Bestellungen zusätzlich die gewünschte Standardfarbe tannengrün, rubinrot, graphitschwarz, ultramarinblau, weißaluminium, graualuminium oder reinweiß angeben. Weitere Farben auf Anfrage.
04 Benches
When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
AvenidaAVENIDA benchFlat steel laser-cut side-frames, one-piece wire-mesh seat and back,15 x 15 mm mesh pattern, wire gauge 3.0 mm diameter weldedonto 38 mm round tube. Mounted on sturdy arched feet, com-pletely galvanized and RILSAN polyamide coated (min. thickness350 microns). With two broad stripes of denser mesh to indicatethe seating spaces and for extra strength.
AVENIDA features:Ergonomic design with a slightly curved knee roll on the seat anda contoured backrest top. Flanged feet can be dowelled/bolted tothe ground / into foundations.
Dimensions: (W x D x H) 1900 x 635 x 820 mm
Technische Änderungen vorbehalten.
05 Benches
We reserve the right to alter specifications without notice.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Option 1ESPLANADE benchTubular steel frame, external tube diameter 38 mm, galvanized and RILSAN polyamide coated, with Pagwood® slats.
Type Model 1800, 3-seaterDimensions: (W x D x H) 1800 x 720 x810 mm, seat height 450 mm
fixed movableOrder no. 51536 51214
Option 2ESPLANADE bench in stainless-steelTubular steel frame, external tube diameter 38 mm, silk-matt pol-ished surface, with Pagwood® slats.
Type Model 1800, 3-seaterDimensions: (W x D x H) 1800 x 720 x810 mm, seat height 450 mm
fixed movableOrder no. 5153624 5121424
Option 3ESPLANADE bench, without backrestTubular steel frame, external tube diameter 38 mm, with tubularsafety bar at the back, galvanized and RILSAN polyamide coated,with Pagwood® slats.
Type Model 1800, 3-seaterDimensions: (W x D x H) 1800 x 652 x 548 mm, seat height 450 mm
fixed movableOrder no. 52317 52344
Option 4ESPLANADE bench, without backrest, back to backTubular steel frame, external tube diameter 38 mm, with tubularsafety bar in the middle, galvanized and RILSAN polyamide coated,with Pagwood® slats.
Type Model 1800, 3-seaterDimensions: (W x D x H) 1800 x 937 x 548 mm, seat height 450 mm
fixed movableOrder no. 52318 52345
Option 5Armrests for ESPLANADEExternal tube diameter 38 mm.
Per pair Steel Stainless-steelOrder no. 58530 5853024
Option 6Floor mounting bracket for ESPLANADE, movable(Two required per bench)Order no. 59630
Option 7Feet with boreholes (see PIAZZA, pg. 9) For bolting the bench tothe ground (customer provides bolts and dowels).
Esplanade
Bitte bei Bestellungen zusätzlich die gewünschte Standardfarbe tannengrün, rubinrot, graphitschwarz, ultramarinblau, weißaluminium, graualuminium oder reinweiß angeben. Weitere Farben auf Anfrage.
06
Melody
Benches
When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
623
402
451 61
5790
MELODY benchFlat steel section side-frames, separate wire-mesh seat and backparts, 15 x 30 mm mesh pattern, wire gauge 3.5 mm; MELODY-style, laser cut, sheet-steel feet and armrests; fully galvanized and RILSAN polyamide coated, (min. thickness 350microns). With four broad stripes of denser mesh to indicate theseating spaces and for extra strength. Stainless steel foot ends.
MELODY features:One-piece combined foot and armrest design. Can be bolted/dowelled to the ground / into foundations.
Dimensions: (W x D x H) 1840 x 621 x 789 mm
MELODY Pagwood® benchFlat steel section side-frames, separate Pagwood® slatted seat and back parts; Melody-style, laser-cut and shaped sheet-steel feet andarmrests; fully galvanized and RILSAN polyamide coated, (min.thickness 350 microns). Stainless steel foot ends.
MELODY features:One-piece combined foot and armrest design.Can be bolted/dowelled to the ground / into foundations.
Dimensions: (W x D x H) 1840 x 621 x 789 mm
Melody-Therm benchFlat steel laser-cut side-frames, separate Pagwood® slatted seatand back parts; laser-cut sheet-steel feet and armrests, fully galva-nized and RILSAN polyamide coated (min. thickness 350 microns).Stainless steel foot ends.
MELODY-Therm features:The seat, and upon request also the backrest, is fitted with aninfrared heater that is embedded in the individual Pagwood®
slats from below, making it splash-proof. Weatherproof to IP X4,protection class II. Actual gain in warmth, approx. 15° C (59° F).
Heating output, approx. 200 watts per seat and back element.230 volt AC supply, wiring box with PG9 cable screw connectionprovided. Connection via 2-wire 1.5 mm2 non-metallic sheathedcable to an appropriate outlet box.
Electromagnetic tested according to EN 50366
TÜV certified, and manufactured to DIN EN ISO 9001.The benches can be operated in outdoor temperatures up to +18°C (+ 64.4° F) without additional thermostatic controls.
Dimensions: (W x D x H) 1840 x 623 x 790 mm
Technische Änderungen vorbehalten.
Benches07
We reserve the right to alter specifications without notice.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
MoleroCast aluminium
MoleroCast aluminium seat, back and feet, extremely strong and stableconstruction, designed with a slightly curving shape for greaterseating comfort. Coloured powder coating, white aluminium asstandard.
Dimensions:(L x W x H) 1540 x 428 x 420 mm, seat height 406 mm
Bitte bei Bestellungen zusätzlich die gewünschte Standardfarbe tannengrün, rubinrot, graphitschwarz, ultramarinblau, weißaluminium, graualuminium oder reinweiß angeben. Weitere Farben auf Anfrage.
08 Benches
When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Piazza®
Option 1PIAZZA benchTubular steel and wire mesh, external tube diameter 38 mm, wiregauge 3.0 mm, mesh pattern 15 x 15 mm, galvanized and RILSANpolyamide coated (min. thickness 350 microns). New broad-stripeddenser mesh for greater strength and seat division. Feet of movablemodel fitted with plastic gliders.
Type Model 1200, 2-seaterDimensions: (W x D x H) 1200 x 720 x 810 mm, seat height 450 mm
fixed movableOrder no. 58813 58803
Type Model 1800, 3-seaterDimensions: (W x D x H) 1800 x 720 x 810 mm, seat height 450 mm
fixed movable fixed with round baseOrder no. 58833 58823
Option 2PIAZZA bench in stainless-steelTubular steel and wire mesh, external tube diameter 38 mm, wiregauge 3.5 mm, mesh pattern 15 x 15 mm, wire ends are welded to the inner sides of the tubes by a new method. Feet of movable model fitted with plastic gliders.
Type Model 1800, 3-seaterDimensions: (W x D x H) 1800 x 720 x 810 mm, seat height 450 mm
fixed movableOrder no. 5883324 5882324
658
810
547
451
Technische Änderungen vorbehalten.
Benches09
We reserve the right to alter specifications without notice.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
937
448
548
1638
1693
1800
713
fixed
548
1800516
652
448
movable
Option 3Armrests for PIAZZAExternal tube diameter 38 mm, galvanized and RILSAN polyamide coated.
Per pair Steel Stainless-steelOrder no. 58530 5853024
Option 4Floor mounting bracket for PIAZZA, movable(Two required per bench)Order no. 59630
Option 5Feet with boreholes for movable foot typeFor bolting the bench to the ground (customer provides bolts and dowels)
movable 1800 mm, 3-seaterOrder no. 51775 4 holes per bench
Option 6PIAZZA bench, without backrestTubular steel and wire mesh, external tube diameter 38 mm, wiregauge 3.0 mm, mesh pattern 15 x 15 mm, with tubular safety bar at the back, galvanized and RILSAN polyamide coated (min. thick-ness 350 microns). New broad-striped denser mesh for greater strength and seat division.
Type Model 1800, 3-seaterDimensions: (W x D x H) 1800 x 652 x 548 mm, seat height 450 mm.
fixed movableOrder no. 52315 52323
Option 7PIAZZA bench, without backrest, back to backTubular steel and wire mesh, external tube diameter 38 mm, wiregauge 3.0 mm, mesh pattern 15 x15 mm, with tubular safety bar in the middle, galvanized and RILSAN polyamide coated (min. thickness 350 microns). New broad-striped denser mesh forgreater strength and seat division.
Type Model 1800, 3-seaterDimensions: (W x D x H) 1800 x 937 x 548 mm, seat height 450 mm.
fixed movableOrder no. 52316 52324
Bitte bei Bestellungen zusätzlich die gewünschte Standardfarbe tannengrün, rubinrot, graphitschwarz, ultramarinblau, weißaluminium, graualuminium oder reinweiß angeben. Weitere Farben auf Anfrage.
10 Benches
When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
SaltoSALTO benchFlat steel section side-frames, separate wire-mesh seat and back parts, 15 x 30 mm mesh pattern, wire gauge 3,5 mm, laser-cut and chamfered steel feet, fully galvanized and RILSANpolyamide coated, (min. thickness 350 microns).With four broad stripes of denser mesh to indicate the seatingspaces and for extra strength. Stainless steel foot ends.
SALTO features:Foot elements and arm rests of strong but elegant laser-cut parts,and bent into beautiful shapes with new bending technology.
Can be bolted / dowelled to the ground / into foundations (customer provides bolts and dowels).
Dimensions: (W x D x H) 1911 x 603 x 794 mm
SALTO Pagwood® benchFlat steel section side-frames, separate Pagwood® slatted seat and back parts, laser-cut and chamfered steel feet, fully galvanized and RILSAN polyamide coated, (min. thickness 350 microns).Stainless steel foot ends.
SALTO features:Foot elements and arm rests of strong but elegant laser-cut parts,and bent into beautiful shapes with new bending technology.
Can be bolted / dowelled to the ground / into foundations (customer provides bolts and dowels).
Dimensions: (W x D x H) 1911 x 603 x 794 mm
SALTO-Therm benchFlat steel laser-cut side-frames, separate Pagwood® slatted seatand back parts, feet and armrests of laser-cut steel, fully galva-nized and RILSAN polyamide coated (min. thickness 350 microns).Stainless steel foot ends.
SALTO-Therm features:The seat, and upon request also the backrest, is fitted with aninfrared heater that is embedded in the individual Pagwood®
slats from below, making it splash-proof. Weatherproof to IP X4,protection class II. Actual gain in warmth, approx. 15° C (59° F). Heating output, approx. 200 watts per seat and back element. 230 volt AC supply, wiring box with PG9 cable screw connectionprovided.Connection via 2-wire 1.5 mm2 non-metallic sheathed cable to anappropriate outlet box.
Electromagnetic tested according to EN 50366, TÜV certified, andmanufactured to DIN EN ISO 9001.The benches can be operated in outdoor temperatures up to +18°C (+ 64.4° F) without additional thermostatic controls.
Dimensions: (W x D x H) 1910 x 605 x 795 mm
518465
605
456 61
7795
Technische Änderungen vorbehalten.
Benches11
We reserve the right to alter specifications without notice.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
454
462
490
648
499SALTO bench, without backrest, wire meshFlat steel section side-frames, wire-mesh seat and back parts, 15 x 30 mm mesh pattern, wire gauge 3,5 mm, laser-cut and chamfered steel feet, fully galvanized and RILSAN polyamide coated, (min. thickness 350 microns).With four four broad stripes of denser mesh to indicate the seat-ing spaces and for extra strength. Stainless steel foot ends.
SALTO features:Arm rests of strong but elegant laser-cut parts, and bent into beautiful shapes with new bending technology.
Can be bolted / dowelled to the ground / into foundations (customer provides bolts and dowels).
Dimensions: (W x D x H) 1893 x 499 x 648 mm
SALTO bench, without backrest, Pagwood®
Flat steel section side-frames, Pagwood® slatted seat, laser-cut andchamfered steel feet, stainless-steel foot ends.
SALTO features:Arm rests of strong but elegant laser-cut parts, and bent into beautiful shapes with new bending technology.
Can be bolted/dowelled to the ground / into foundations (customer provides bolts and dowels).
Dimensions: (W x D x H) 1893 x 499 x 648 mm
SALTO-Therm bench, without backrestFlat steel laser-cut side-frames, Pagwood® slatted seat, feet andarmrests of laser-cut steel, fully galvanized and RILSAN polyamidecoated (min. thickness 350 microns). Stainless steel foot ends.
SALTO-Therm features:The seat is fitted with an infrared heater that is embedded in theindividual Pagwood® slats from below, making it splash-proof.Weatherproof to IP X4, protection class II. Actual gain in warmth, approx. 15° C (59° F). Heating output, approx. 200 watts per seat element. 230 volt ACsupply, wiring box with PG9 cable screw connection provided.Connection via 2-wire 1.5 mm2 non-metallic sheathed cable to anappropriate outlet box.
Electromagnetic tested according to EN 50366.
TÜV certified, and manufactured to DIN EN ISO 9001.
The benches can be operated in outdoor temperatures up to+18°C (+ 64.4° F) without additional thermostatic controls.
Dimensions: (W x D x H) 1893 x 499 x 648 mm
Bitte bei Bestellungen zusätzlich die gewünschte Standardfarbe tannengrün, rubinrot, graphitschwarz, ultramarinblau, weißaluminium, graualuminium oder reinweiß angeben. Weitere Farben auf Anfrage.
12 Benches
When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
SchwarzwaldOption 1SCHWARZWALD park bench, 4-seaterTubular steel frame, external tube diameter 34 mm, wire meshseat and backrest, wire gauge 3.0 mm, mesh pattern 15 x 15 mm, galvanized and RILSAN polyamide coated (min. thickness 350microns). New broad-striped denser mesh for greater strength andseat division. Flanged feet for fixed mounting.
Dimensions: (W x D x H) 2000 x 705 x 820 mm, seat height 450 mm
Type fixed movableOrder no. 58703 51749
Option 2SCHWARZWALD park bench, 4-seater, without backrestTubular steel frame, external tube diameter 34 mm, wire gauge 3.0 mm, mesh pattern 15 x 15 mm, galvanized and RILSANpolyamide coated (min. thickness 350 microns). New broad-stripeddenser mesh for greater strength and seat division. Flanged feet for fixed mounting.
Dimensions: 2000 mm long, 600 mm deep, seat height 450 mm
Type fixed movableOrder no. 52013 52245
Option 3SCHWARZWALD seat or backrestTubular steel frame, external tube diameter 34 mm, wire meshseat or back rest, wire gauge 3.0 mm, mesh pattern 15 x 15 mm, galvanized and RILSAN polyamide coated (min. thickness 350microns).
Dimensions: (W x D x H) 2000 x 430 x 100 mm.
Type fixedOrder no. 58708
Welded fastening lugs for mounting on supports with spacersfrom option 4.
Option 4Fastening components for SCHWARZWALD seats or backrests.Set of 4, laterally adjustable, to fit existing, purpose made substructures.
Order no. 58707*4 components required per multi seat unit.
Option 5Spacer for SCHWARZWALD multi seat unitHot dip galvanized, for mounting on walls, tiered stages(4 components required per multi seat unit).
Without mounting accessories for wall-mountingOrder no. 5871717
Technische Änderungen vorbehalten.
Benches13
We reserve the right to alter specifications without notice.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
SiestaOption 1SIESTA park benchWith armrests and raised seat, 3-4 seater, tubular steel and wiremesh, external tube diameter 38 mm, wire gauge 3.0 mm, meshpattern 15 x 15 mm, galvanized and RILSAN polyamide coated (min. thickness 350 microns). New broad-striped denser mesh forgreater strength and seat division. Flanged feet for fixed mounting.
Dimensions: (W x D x H) 1880 x 630 x 840 mm, seat height 470 mm
Type movable fixedOrder no. 56493 51955
Particularly suitable for the elderly and infirm
Bitte bei Bestellungen zusätzlich die gewünschte Standardfarbe tannengrün, rubinrot, graphitschwarz, ultramarinblau, weißaluminium, graualuminium oder reinweiß angeben. Weitere Farben auf Anfrage.
14
StellaSTELLA benchFlat steel laser-cut side-frames, one-piece wire-mesh seat and back,15 x 30 mm mesh pattern, wire gauge 3.5 mm. Feet and armrestsof laser-cut steel, fully galvanized and RILSAN polyamide coated(min. thickness 350 micron). With four broad stripes of densermesh to indicate the seating spaces and for extra strength.
STELLA features:One-piece combined feet and armrest design. One piece seat andback design. Wire mesh ends terminate inside Erlau’s special pro-file. Feet can be dowelled/bolted to the ground / into foundations.
Dimensions: (W x D x H) 1820 x 670 x740 mm
STELLA Pagwood® benchFlat steel laser-cut side-frames, Pagwood® slatted seat and back.Feet and armrests of laser-cut steel, fully galvanized and RILSANpolyamide coated (min. thickness 350 microns).
STELLA features:One-piece combined feet and armrest design. One-piece seat andback design. Feet can be dowelled/bolted to the ground / intofoundations.
Dimensions: (W x D x H) 1820 x 670 x740 mmType movable / fixed
STELLA-Therm bench Flat steel laser-cut side-frames, Pagwood® slatted seat and back.Feet and armrests of laser-cut steel, fully galvanized and RILSANpolyamide coated (min. thickness 350 microns).
Stella-Therm features:The seat and back elements are fitted with an infrared heater thatis embedded in the individual Pagwood® slats from below, makingit splash-proof. Weatherproof to IP X4, protection class II. Actualgain in warmth, approx. 15° C (59° F).
Heating output, approx. 200 watts per seat and back element. 230 volt AC supply, wiring box with PG9 cable screw connectionprovided. Connection via 2-wire 1.5 mm2 non-metallic sheathedcable to an appropriate outlet box.
Electromagnetic tested according to EN 50366
TÜV certified, and manufactured to DIN EN ISO 9001.
The benches can be operated in outdoor temperatures up to + 18°C (+ 64.4° F) without additional thermostatic controls.
Feet can be dowelled / bolted to the ground / into foundations.
Dimensions: (W x D x H) 1820 x 630 x 740 mm
Type movable / fixed
Benches
When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Technische Änderungen vorbehalten.
Benches15
Stella-tubo benchFlat steel laser-cut side-frames, seat and back areas completely of25 mm diameter stainless steel tube, 2 mm ends. Feet and armrestsof laser-cut steel, fully galvanized and RILSAN polyamide coated(min. thickness 350 microns).
STELLA features:One-piece combined feet and armrest design. One-piece seat andback design. Feet can be dowelled/bolted to the ground / intofoundations.
Dimensions: (W x D x H) 1820 x 670 x740 mmType movable / fixed
We reserve the right to alter specifications without notice.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Bitte bei Bestellungen zusätzlich die gewünschte Standardfarbe tannengrün, rubinrot, graphitschwarz, ultramarinblau, weißaluminium, graualuminium oder reinweiß angeben. Weitere Farben auf Anfrage.
16
Strada | CharismaSTRADA benchFlat steel laser-cut side-frames, wire-mesh seat and back surfaces,15 x 30 mm mesh pattern, wire gauge 3,5 mm, square tube feetand armrests, fully galvanized and RILSAN polyamide coated, (min. thickness 350 microns). With four broad stripes of densermesh to indicate the seating spaces and for extra strength.
STRADA features:One-piece combined foot and armrest design. One piece seat andback design. Wires terminate inside special ERLAU profiles, feet can be bolted/dowelled to the ground / into foundations.
Dimensions: (W x D x H) 1820 x 630 x 740 mm
Type movable / fixed (with stainless steel ground clips)
Strada Pagwood benchFlat steel section laser-cut side-frames, Pagwood® slatted seat andback surfaces. Square tube feet and armrests, fully galvanized andRILSAN polyamide coated (min. thickness 350 microns).
STRADA features:One-piece combined feet and armrest design One-piece seat andback design. Feet can be dowelled/bolted to the ground / intofoundations.Dimensions: (W x D x H) 1820 x 630 x740 mm
Type movable / fixed (with stainless steel ground clips)
Strada-Therm benchFlat steel laser-cut side-frames, Pagwood® slatted seat and backsurfaces. Square tube feet and armrests, fully galvanized and RIL-SAN polyamide coated (min. thickness 350 microns).
STRADA-Therm features:The seat and back elements are fitted with an infrared heater thatis embedded in the individual Pagwood® slats from below, makingit splash-proof. Weatherproof to IP X4, protection class II. Actualgain in warmth, approx. 15° C (59° F).Heating output, approx. 200 watts per seat and back element. 230 volt AC supply, wiring box with PG9 cable screw connectionprovided. Connection via 2-wire 1.5 mm2 non-metallic sheathedcable to an appropriate outlet box.
Electromagnetic tested according to EN 50366
TÜV certified, and manufactured to DIN EN ISO 9001.
The benches can be operated in outdoor temperatures up to + 18°C (+ 64.4° F) without additional thermostatic controls.
Feet can be dowelled / bolted to the ground / into foundations.
Dimensions: (W x D x H) 1820 x 630 x 740 mm
Type movable / fixed (with stainless steel ground clips)
Benches
When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
45
4
74
0
603
630
58
0
732
603
74
2
58
6
44
9
Strada Charisma
Technische Änderungen vorbehalten.
Benches17
We reserve the right to alter specifications without notice.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
STRADA-tubo benchFlat steel laser-cut side-frames, seat and back surfaces are formedentirely of stainless-steel tubing, 25 mm diameter, 2 mm wall thick-ness, square tube feet and armrests, fully galvanized and RILSANpolyamide coated, (min. thickness 350 microns).
STRADA features:One-piece combined foot and armrest design. One piece seat andback design. Wires terminate inside special ERLAU profiles, feet canbe bolted / dowelled to the ground / into foundations.Dimensions: (W x D x H) 1820 x 630 x 740 mm
Type movable / fixed (with stainless steel ground clips)
CHARISMA benchFlat steel laser-cut side-frames, wire-mesh seat and back surfaces, 15 x 30 mm mesh pattern, wire gauge 3,5 mm, strong round-tubularfeet curving into the side frames, fully galvanized and RILSAN poly-amide coated, (min. thickness 350 microns). With four broad stripesof denser mesh to indicate the seating spaces and for extra strength.
CHARISMA features:One piece seat and back design. Wires terminate inside special ERLAUprofiles, feet can be bolted / dowelled to the ground / into foundations.Dimensions: (W x D x H) 1785 x 685 x 740 mm
Type movable / fixed (with stainless steel ground clips)
Charisma Pagwood benchFlat steel section laser-cut side-frames, Pagwood® slatted seat andback surfaces. Round tube feet and armrests, fully galvanized andRILSAN polyamide coated (min. thickness 350 microns).
CHARISMA features:One-piece combined feet and armrest design. One-piece seat andback design. Feet can be dowelled / bolted to the ground / into foundations.Dimensions: (W x D x H) 1785 x 685 x 740 mm
Type movable / fixed
Charisma-Therm benchFlat steel section laser-cut side-frames, Pagwood® slatted seat andback surfaces. Round tube feet and armrests, fully galvanized andRILSAN polyamide coated (min. thickness 350 microns). Seat and backelements fitted with infrared heating.
CHARISMA features:One-piece combined feet and armrest design. One-piece seat andback design. Feet can be dowelled / bolted to the ground / into foundations.Dimensions: (W x D x H) 1785 x 685 x 740 mm
Type movable / fixed
CHARISMA-tubo benchFlat steel section laser-cut side-frames, seat and back areas completelyof 25 mm diameter stainless steel tube, 2 mm ends. Feet and armrestsof round tube, fully galvanized and RILSAN polyamide coated (min. thickness 350 microns).
CHARISMA features:One-piece combined feet and armrest design. One-piece seat andback design. Feet can be dowelled / bolted to the ground / into foundations.Dimensions: (W x D x H) 1785 x 685 x 740 mmType movable / fixed
Bitte bei Bestellungen zusätzlich die gewünschte Standardfarbe tannengrün, rubinrot, graphitschwarz, ultramarinblau, weißaluminium, graualuminium oder reinweiß angeben. Weitere Farben auf Anfrage.
18
Viamona®
VIAMONA bench with arm rests, movable2 mm stainless-steel perforated plate seat and back surfaces,square hole pattern, steel angle section combined feet/armrests,galvanized and powder-coated. Free standing feet, can be bolted /dowelled to the ground / into foundations.(Customer provides bolts and dowels).
Dimensions: (W x D x H) 1920 x 622 x 800 mm, seat height 460 mm
Seat surface: Stainless steel, ground
Benches
When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
800
630
622
800
622
VIAMONA bench without arm rests, movable2 mm stainless-steel perforated plate seat and back surfaces,square hole pattern, steel angle section feet, galvanized and powder-coated. Free standing, can be bolted / dowelled to theground / into foundations. (Customer provides bolts and dowels).
Dimensions: (W x D x H) 1920 x 622 x 800 mm, seat height 460 mm
Seat surface: Stainless steel, ground
Bitte bei Bestellungen zusätzlich die gewünschte Standardfarbe tannengrün, rubinrot, graphitschwarz, ultramarinblau, weißaluminium, graualuminium oder reinweiß angeben. Weitere Farben auf Anfrage.
19
Allegro®
Allegro-made of stainless steel
Option 1ALLEGRO Lisbon multi seat unitOrder no. 5252300
On 50 x 50 mm square tube support, available with the foot designs: A fixed, B fixed with base plate, C movable.
Type Total length No.of feet
2-seater 1025 mm 23-seater 1600 mm 24-seater 2175 mm 25-seater 2750 mm 3
Seats and seating systems
When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Option 2ALLEGRO seat SU(As option 1)For mounting on top of walls.
Order no. 5160024
Without accessories for mounting on top of walls
Option 3ALLEGRO seat SR, straight(Design as option 1)For wall-mounting.
Order no. 5160124
Without accessories for wall-mounting
Single seats with and without armrests
both sides left right without
Please note:
The armrests are welded to the seats thus they cannot be added later.
Armrests
both sides left right withoutOrder no. 5161324 5159824 5161424 5160524
ALLEGRO Lisbon stainless steel multi seat unitStainless steel seats, 30 mm tube diameter, 15 x 15 mm wire mesh pat-tern, 3.0 mm wire gauge, wire mesh welded to the inner sides of thetubes. (Patent applied for.)Dimensions: 450 mm wide, 600 mm deep, seat height ca. 450 mm.
Steel subframe, galvanized and coated. 50 x 50 mm supporting tube.
460
815
450
600
815
450
160
600
815
450
ca. 4
00
ca. 250
650
815
450
370
60
600
815
450
max. 275
295
1025
575
1600
1150
1725
2 sitzig
3 sitzig
450450 2175
1725
4 sitzig
2750
1150
5 sitzig
1150
Dimensions and types of fixing
A fixed B fixed with base plate
For fixing to walls For wall mounting
C movable
Also available on a curved supporting frame on request.
Technische Änderungen vorbehalten.
Seats and seating systems20
We reserve the right to alter specifications without notice.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
These ground sleeves are suitable for use with all multi seat units on 50 x 50 supporting tubes.
Ground sleeveOrder no. 5003665
Special ground sleeves are now available for temporarily removingthe multi seat unit. You need one ground sleeve for each foot.
Ground sleeve of grey cast-iron, treated with acrylic resin lacquer,300 mm long with lateral anchoring claws. Threaded ring and blindplug also of grey cast-iron, chrome-plated. Polyamide strain ring.
Use:• The ground sleeve is concreted in level with the ground.• The threaded ring and strain ring are slipped over
the lower end of the foot.• The foot of the bench is inserted into the ground sleeve.• The threaded ring is screwed tight.• When the bench is removed, the ground sleeve is sealed
with a blind plug.
Foot
Threaded ring
Strain ring
Ground sleeve
Foundation
Ground sleeve for foot design A supplied optionally. See description for the Exposit multi seat unit.
Bitte bei Bestellungen zusätzlich die gewünschte Standardfarbe tannengrün, rubinrot, graphitschwarz, ultramarinblau, weißaluminium, graualuminium oder reinweiß angeben. Weitere Farben auf Anfrage.
21
Allegro®
Seats and seating systems
When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
ALLEGRO- steel multi seat unitsSeat and subframe galvanized and RILSAN polyamide coated (min.thickness 350 microns). 30 mm tubular steel seat frame, 3.0 mm wiregauge, 15 x 15 mesh pattern.
With areas of denser mesh on each side for additional strength.
Dimensions: width 450 mm, depth 600 mm, height 450 mm
Option 4ALLEGRO - multi seat unitOrder no. 5252200
On 50 x 50 mm square tube support, available with the foot designs: A fixed, B fixed with base plate, C movable.
Type Total length No.of feet
2-seater 1025 mm 23-seater 1600 mm 24-seater 2175 mm 25-seater 2750 mm 3
An installed height ofbetween 420 and 470 mm is possible with the fixeddesign (A). 470 mm, coupled with armrests, isparticularly suitable for theaged and infirm.
Option 5ALLEGRO SU seat(As option 1)For mounting on top of walls.
Order no. 56603
Without accessories for mounting on top of walls
Option 6ALLEGRO SR seat(Design as option 1)For wall-mounting.
Order no. 51074
Without accessories for wall-mounting
Technische Änderungen vorbehalten.
Seats and seating systems22
We reserve the right to alter specifications without notice.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Option 7ALLEGRO seat, on curved oval supporting tubeSeat and subframe galvanized and RILSAN polyamide coated (min. thickness 350 microns), 30 mm tubular seat frame, 3.0 mmwire gauge, 15 x 15 mesh pattern. With areas of denser mesh oneach side for additional strength. Standard radius 1460 mm to centre of supporting tube. Seats facing inwards, radius 1120 mmto front edge of seat. Seats facing outwards, radius 1800 mm to front edge of seat.
Dimensions: width 450 mm, depth 600 mm, height 450 mm
Multi seat unit A B CNumber of Fixed Fixed Movableseats with base-
plate4 (900) Order no. 55641 55651 55661
8 (1800) Order no. 55642 55652 55662
12 (2700) Order no. 55643 55653 55663
16 (3600) Order no. 55644 55654 55664
Single seats with and without armrests
both sides left right without side shelf
Please note:
The armrests are welded to the seats thus theycannot be added later.
Armrests/side shelf
both sides left right without side shelfOrder no. 56670 56690 56680 56600 51402
Option 8ALLEGRO seat, on radially curved oval supporting tube(Design as option 1)For supporting tube radius over 1460 mm. With your order,please enclose a plan showing the radii, dimensions of arcs anddesired seat direction.
Dimensions: width 450 mm, depth 600 mm, height 450 mm,
Order no. 5567000
Type A B CFixed Fixed movable
with base-plate
At least 3 seats are required per multi seat unit.
Typical combinationOther possible combinations on request.
Bitte bei Bestellungen zusätzlich die gewünschte Standardfarbe tannengrün, rubinrot, graphitschwarz, ultramarinblau, weißaluminium, graualuminium oder reinweiß angeben. Weitere Farben auf Anfrage.
23
Allegro®-VarioOption 9ALLEGRO Vario-RondoConsisting of 4 x 90° elements with 4 x 44.5 mm diameter roundtubular legs, galvanized and RILSAN polyamide coated (min. thick-ness 350 microns). 90° elements with 30 mm tubes and 15 x 15 mm mesh pattern.
Dimensions:Seat height 450 mm, 1450 mm external diameter, 250 mm clear inner aperture.
movable fixedOrder no. 51038 on request
Seats and seating systems
When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
ArenaOption 1ARENA - multi seat unitOrder no. 5252400
On 50 x 50 mm square tube support, available with the foot designs:A fixed, B fixed with base plate, C movable.
Type Total length No.of feet
2-seater 1025 mm 23-seater 1600 mm 24-seater 2175 mm 25-seater 2750 mm 3
ARENA - multi seat unitSeat and subframe galvanized and RILSAN polyamide coated(minimum thickness 350 microns), 22 mm round tubular frame, 3.0 mm wire mesh, 30 x 20 mesh pattern on back, 11 x 9 mm mesh pattern on seat.
Dimensions:430 mm wide, 460 mm deep, seat height ca. 450 mm.
Technische Änderungen vorbehalten.
Seats and seating systems24
We reserve the right to alter specifications without notice.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
460
815
450
C movable
650
815
450
370
60
600
815
450
max. 275
295
For fixing to walls For wall mounting
600
815
450
160
600
815
450
ca. 4
00
ca. 250
A fixed
B fixed with base plate
Option 2ARENA SU (As option 1)For mounting on top of walls.Variable seat height.
Order no 52110
Without accessories for mounting on top of walls
Option 3ARENA SR single seat(As option 1)For wall-mounting, on request.
Order no. 52624
Without accessories for wall-mounting
430
1025575
1600
1150
2175
2750
1725
1150
2 sitzig
3 sitzig
4 sitzig
5 sitzig
430
1150
Dimensions and types of fixing
Ground sleeve for foot design A supplied optionally. See description for the Exposit multi seat unit.
Bitte bei Bestellungen zusätzlich die gewünschte Standardfarbe tannengrün, rubinrot, graphitschwarz, ultramarinblau, weißaluminium, graualuminium oder reinweiß angeben. Weitere Farben auf Anfrage.
25 Seats and seating systems
When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
1377
ø 25
x2
ø 250
45°
900
Option 1ENANO - single seat 45°25 mm external diameter tubular steel seat frame. Wire mesh seat surface, 250 mm diameter, 15 x 15 mm mesh pat-tern, 3.0 mm wire gauge, with 50 mm diameter tubular stand.Galvanized and RILSAN polyamide coated (min. thickness 350microns).
Order no. 52373
Option 2ENANO - single seat, flat25 mm external diameter tubular steel seat frame. Wire mesh seatsurface, 250 mm diameter, 15 x 15 mm mesh pattern, 3.0 mm wire gauge, with 50 mm diameter tubular stand. Galvanized andRILSAN polyamide coated (min. thickness 350 microns).
Order no. 52372
Option 3ENANO - table with foot rail25 mm external diameter tubular steel table frame, wire mesh table surface, 250 mm diameter, 15 x 15 mm mesh pattern, 3.0 mm wire gauge, with 50 mm diameter tubular stand, 34 mmdiameter foot rail. Table galvanized and RILSAN polyamide coated(min. thickness 350 microns). Hot-dip galvanized tubular standand foot rail.
Order no. 52443
Enano
ø 500
1100
1439
400
ø 34
ø 25
721
ø 250
740
1217
ø 25
x2
Technische Änderungen vorbehalten.
Seats and seating systems26
We reserve the right to alter specifications without notice.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Exposit®
Pure ergonomicsThis is a seat with elegant, majestically curved lines which couldnot be more comfortable.
Option 1EXPOSIT - multi seat unitOrder no. 5252800
On 50 x 50 mm square tube support, available with the foot designs: A fixed, B fixed with base plate, C movable.
Type Total length No.of feet
2-seater 1050 mm 23-seater 1625 mm 24-seater 2200 mm 25-seater 2775 mm 3
Armrests and side table supplied on request.
Figure: 3 seater with side table
EXPOSIT - multi seat unitSeat and subframe galvanized and RILSAN polyamide coated (minimum thickness 350 microns), seat frame made of flat steel form and profile parts, 15 x 30 mm wire mesh pattern, 3.0 mm wire gauge.
EXPOSIT features:Ergonomic design, concave seat with knee roll, curved andanatomically correct back, wire mesh welded to the inner sides ofthe frame. Apart from that, the overall design prevents misuse forsleeping and makes it more difficult to sit on the back, i.e. nodirty footmarks on the seats.
Dimensions:width 475 mm, depth 641 mm, overall height 840 mm, seat height 460 mm
both sides left right without
Please note:
The armrests are welded to the seats thus they cannot be added later.
Option 2Armrests
both sides left right withoutOrder no.. 51663 51664 51665 51594
Single seats with and without armrests
Ground sleeveOrder no. 5003665 only for foot design A
Special ground sleeves are now available for temporarily removingthe multi seat unit upon request and at extra charge. You need oneground sleeve for each foot. Ground sleeve of grey cast-iron, treatedwith acrylic resin lacquer, 300 mm long with lateral anchoring claws.Threaded ring and blind plug also of grey cast-iron, chrome-plated.Polyamide strain ring.
Use:• The ground sleeve is concreted in level with the ground.• The threaded ring and strain ring are slipped over the lower end
of the foot.• The foot of the bench is inserted into the ground sleeve.• The threaded ring is screwed tight.• When the bench is removed, the ground sleeve is sealed with
a blind plug.
Bitte bei Bestellungen zusätzlich die gewünschte Standardfarbe tannengrün, rubinrot, graphitschwarz, ultramarinblau, weißaluminium, graualuminium oder reinweiß angeben. Weitere Farben auf Anfrage.
27 Seats and seating systems
When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
641
840
460
641
840
460
160
641
840
460
ca. 4
00
ca. 250
Dimensions and types of fixing
A fixed B fixed with base plate C movable
Ground sleeve for foot design A supplied optionally. See description for the Exposit multi seat unit.
641
840
450
max. 275
365
For fixing to walls
Option 3EXPOSIT seats
Exposit-SU Exposit-SRFor mounting Foron top of walls. wall-mounting
Order no. 52629 52630
Without mounting accessoriesAvailable with welded-on armrests upon request.
641
840
460
For wall mounting
These ground sleeves are suitable or use with all multi seat units on 50 x 50 supporting tubes.
Foot
Threaded ring
Strain ring
Ground sleeveFoundation
Technische Änderungen vorbehalten.
Seats and seating systems28
We reserve the right to alter specifications without notice.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
MultiOption 1MULTI - multi seat unitOrder no. 5252500
On 50 x 50 mm square tube support, available with the foot designs: A fixed, B fixed with base plate, C movable.
Type Total length No.of feet
2-seater 1025 mm 23-seater 1600 mm 24-seater 2175 mm 25-seater 2750 mm 3
MULTI - multi seat unitSeat and subframe galvanized and RILSAN polyamide coated (mini-mum thickness 350 microns), round 25 mm diameter tubular frame,3.0 mm wire gauge, 15 x 15 mm wire mesh pattern.
Dimensions: 400 mm wide, 355 mm deep, 135 mm high,seat height approx. 430 mm.
Option 2MULTI - R single seat for wall-mounting.Tubular steel and wire mesh seat surface.
Dimensions: width 400 mm, depth 395 mm, height 135 mm,Variable seat height, without accessories for wall-mounting
Order no. 58233
Option 3MULTI-U single seat for mounting on steps, wallsTubular steel and wire mesh seat surface.
Dimensions:width 400 mm, depth 350 mm, height 100 mm,Bracket height 75 mm, seat height variable according to base,without accessories for mounting on top of walls
Order no. 51324
Option 4MULTI-OZG, single seat with radial frame and subframeA leg is required after four seats.Frame and feet galvanized and colour-coated. With your order, pleaseenclose a plan showing the radii, dimensions of arcs and desired seatdirection.
Dimensions: width 400 mm, depth 350 mm, seat height 430 mm,
Order no. 5825300Type A B C
fixed fixed movablewith base-plate
Bitte bei Bestellungen zusätzlich die gewünschte Standardfarbe tannengrün, rubinrot, graphitschwarz, ultramarinblau, weißaluminium, graualuminium oder reinweiß angeben. Weitere Farben auf Anfrage.
29 Seats and seating systems
When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Option 5MULTI stainless steel multi seat unitOrder no. 5252600
Stainless steel seats, 25 mm tube diameter, 15 x 15 mm mesh pat-tern, 3.0 mm wire gauge. Ends of wires welded to inner sides of tubes (patent applied for).
Dimensions: width 400 mm, depth 355 mm, height 135 mm, seat height 430 mm.
Galvanized and coated steel subframe, on 50 x 50 mm square tube support, available with the foot designs: A fixed, B fixed with base plate, C movable.
Type Total length No. of feet2-seater 1025 mm 23-seater 1600 mm 24-seater 2175 mm 25-seater 2750 mm 3
ca. 4
00
ca. 250
350
430
350
430
510
max. 275
350
430
ca. 3
50
350
430
395
160
350
430
Dimensions and types of fixing foroptions 1 - 5
A fixed B fixed with base plate C movable
For mounting on top of walls.For wall-mounting
Ground sleeve for foot design A supplied optionally.See description for the Exposit multi seat unit.
1025
575
1600
1150
2175
2750
1150
1725
2 sitzig
3 sitzig
4 sitzig
5 sitzig
400400
1150
3-seater
4-seater
5-seater
2-seater
Technische Änderungen vorbehalten.
Seats and seating systems30
We reserve the right to alter specifications without notice.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Option 1TOPSIT - multi-seat units with Pagwood®
Order no. 5252700
On square tube support 50 x 50 mm, available with the foot designs: A fixed, B fixed with base plate, C movable.Armrests supplied on request.
The following variants are possible:armrest right, armrest left, armrests on both sides (from the posi-tion of the seated person).
Type Total length No.of feet
2-seater 1025 mm 23-seater 1600 mm 24-seater 2175 mm 25-seater 2750 mm 3
Armrests supplied on request.
Topsit multi-seat units are also available on request with tubular frames.
160
641
840
460
ca. 4
00
ca. 250
A fixed B fixed with base plate C movable
Ground sleeve for foot design A supplied as an option.See description for the Esperanza seat unit, page 22.
Dimensions and types of fixing
Topsit with Pagwood®
TOPSIT - multi-seat unit with Pagwood®
Side frames made of laser-cut components, seat and back surfaces are formed by Pagwood® slats.Frames are galvanized and RILSAN polyamide coated, minimum thickness 350 microns.
Dimensions:width 475 mm, depth 643 mm, height 842 mm, seat height approx. 450 mm.
Also available with curved supporting tubes on request.
Topsit
Option 2TOPSIT - multi seat unitsOrder no. 5252700
On rectangular 50 x 50 mm supporting tube, galvanized and coat-ed, available with the foot designs:A fixed, B fixed with base plate, C movable.
Type Total length No.of feet
2-seater 1025 mm 23-seater 1600 mm 24-seater 2175 mm 25-seater 2750 mm 3
Armrests supplied on request.
Bitte bei Bestellungen zusätzlich die gewünschte Standardfarbe tannengrün, rubinrot, graphitschwarz, ultramarinblau, weißaluminium, graualuminium oder reinweiß angeben. Weitere Farben auf Anfrage.
31 Seats and seating systems
When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
TOPSIT - multi seat unitLaser-cut frames, wire-mesh seat and back surfaces, 15 x 30 mmmesh pattern, 4.0 mm wire gauge, wires terminate inside frames.Upper wires are transverse to seat direction. There are two areasof denser mesh to conceal the flame cut parts and for additionalseat strength. Galvanized and RILSAN polyamide coated, mini-mum thickness 350 microns.
Dimensions:width 475 mm, depth 643 mm, height 842 mm, seat height approx. 450 mm
Note:Orders and invitations to tender should also state in each case:With or without armrests.If with armrests then where and how many.Which foot design: A, B or C.How many seats: 2, 3, 4 or 5-seater
Also available with curved supporting tubes on request.
641
840
460
ca. 4
00
ca. 250
160
A fixed B fixed with base plate C movable
Ground sleeve for foot design A supplied as an option. See description of the Exposit seat unit.
Dimensions and types of fixing
Technische Änderungen vorbehalten.
Seats and seating systems
We reserve the right to alter specifications without notice.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Single seats with and without armrests
both sides left right without
Please note:
The armrests are welded to the seats thus they cannot be added later.
Armrests
both sides left right withoutBestell-Nr. 52351 52353 52352 52354
Option 3TOPSIT - multi seat units in perforated plateOrder no. 5252700
On 50 x 50 mm square tube support, galvanized and coated steel,available with the foot designs: A fixed, B fixed with base plate, C movable.Armrests supplied on request.
The following variants are possible:Armrest right, armrest left, double-sided armrest (from the position of the seated person).
We recommend Topsit Pagwood® without backrest when used incombination with a table. See page 34.
Type Total length No.of feet
2-seater 1025 mm 23-seater 1600 mm 24-seater 2175 mm 25-seater 2750 mm 3
Armrests supplied on request.
Topsit multi seat units are also available with round-tube support.
Topsit - perforated plateIn stainless steel
Laser-cut frames, perforated plate seat and back seat and back surfaces, square hole pattern, 2.0 mm thick, standard corundum-blasted and electrolytically polished surface. Galvanized and coated steel subframe.
32
641
840
460
ca. 4
00
ca. 250
160
Also available with curved supporting tubes on request.
A fixed B fixed with base plate C movable
Ground sleeve for foot design A supplied as an option.See description of the Exposit seat unit..
Dimensions and types of fixing
Single seats with and without armrests
both sides left right without
Please note:The armrests are welded to the seats thus they cannot be added later.
Bitte bei Bestellungen zusätzlich die gewünschte Standardfarbe tannengrün, rubinrot, graphitschwarz, ultramarinblau, weißaluminium, graualuminium oder reinweiß angeben. Weitere Farben auf Anfrage.
33 Seats and seating systems
When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Type Total length No.of feet
2-seater 1025 mm 23-seater 1600 mm 24-seater 2175 mm 25-seater 2750 mm 3
Armrests supplied on request.
Topsit multi seat units are also available with round-tube supports.
Topsit without backrestmulti seat unit with Pagwood® slatted seats
TOPSIT - without backrest multi seat unit, Pagwood®
Laser-cut side-frames, 12 mm Pagwood® slatted seats. Seat frames and subframe made of galvanized and coated steel.
Dimensions: width 475 mm, depth 485 mm, seat height 443 mm,
Option 4TOPSIT - multi seat unit without back, Pagwood®
Order no. 5252700
On 50 x 50 mm square tube support, galvanized and coatedsteel, available with the foot designs: A fixed, B fixed with base plate, C movable.Armrests supplied on request.
The following variants are possible:Armrest right, armrest left, double-sided armrest (from the position of the seated person).
512
574
445
ca. 4
00
ca. 250
160
A fixed B fixed with base plate C movable
Ground sleeve for foot design A supplied as an option.
Dimensions and types of fixing
Technische Änderungen vorbehalten.
Seats and seating systems34
We reserve the right to alter specifications without notice.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
both sides left right without
Please note:
The armrests are welded to the seats thus they cannot be added later.
Also available with curved supporting tubes on request.
Option 5TOPSIT - multi seat unit without back, wire meshOrder no. 5252700
On 50 x 50 mm square tube support, galvanized and coated steel, available with the foot designs: A fixed, B fixed with base plate, C movable.Armrests supplied on request. The following variants are possible:Armrest right, armrest left, double-sided armrest (from the position of the seated person).
Type Total length No.of feet
2-seater 1025 mm 23-seater 1600 mm 24-seater 2175 mm 25-seater 2750 mm 3
Armrests supplied on request.
Topsit multi seat units are also available with round-tube frames.
Topsit without backrestwith wire mesh
TOPSIT - multi seat unit without back, wire meshLaser-cut side frames, wire-mesh seat surface, 15 x 30 mm meshpattern, 4.0 mm wire gauge, wires terminate inside frames. Upper wires are transverse to seat direction. There are two broad stripes of denser mesh for additional seatstrength. Galvanized and RILSAN polyamide coated, minimumthickness 350 microns.
Dimensions: width 475 mm, depth 485 mm, height 443 mm,
512
574
445
ca. 4
00
ca. 250
160
A fixed B fixed with base plate C movable
Ground sleeve for foot design A supplied as an option.
Dimensions and types of fixing
both sides left right without
Please note:
The armrests are welded to the seats thus they cannot be added later.
Also available with curved supporting tubes on request.
Bitte bei Bestellungen zusätzlich die gewünschte Standardfarbe tannengrün, rubinrot, graphitschwarz, ultramarinblau, weißaluminium, graualuminium oder reinweiß angeben. Weitere Farben auf Anfrage.
35
When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Seats and seating systems
45
1
83
9
100
10
0
475
18
6
1825
Option 7TOPSIT multi seat unit, 4-seater with 5 armrestsConsisting of:
3 TOPSIT seats with armrests on the right-hand side,1 TOPSIT seat with armrests on both sides,1 trapezoid subframe
Dimensions:475 mm wide, 643 mm deep, total length 2400 mm
TOPSIT - multi seat units on trapezoid subframesFor high class waiting areas, for DB design gmp, single row.100 x 50 mm supporting tube, galvanized and plastic-coated,trapezoid feet of 80 mm square tube, with boreholes for bolt-ing to finished floor.
Option 8TOPSIT multi seat unit, 5-seater with 6 armrestsConsisting of:
4 TOPSIT seats with armrests on the right-hand side,1 TOPSIT seat with armrests on both sides,1 trapezoid subframe
Dimensions:475 mm wide, 643 mm deep, total length 2975 mm
Option 6TOPSIT multi seat unit, 3-seater with 4 armrests
Laser-cut side frames, wire-mesh seat and back surfaces, 15 x 30 mm mesh pattern, 4.0 mm wire gauge, wires terminateinside special DB profile, upper wires are transverse to seat direction, with special areas of denser mesh for additional seatstrength. Galvanized and RILSAN polyamide coated, minimumthickness 350 microns.
Dimensions:475 mm wide, 643 mm deep, total length 1825 mm
Consisting of: 2 TOPSIT seats with armrests on the right-hand side, 1 TOPSIT seat with armrests on both sides, trapezoid subframe.
Technische Änderungen vorbehalten.
Seats and seating systems36
We reserve the right to alter specifications without notice.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
1825
193 641
1475
100
83
9
18
6
45
1
10
0
475
Bitte bei Bestellungen zusätzlich die gewünschte Standardfarbe tannengrün, rubinrot, graphitschwarz, ultramarinblau, weißaluminium, graualuminium oder reinweiß angeben. Weitere Farben auf Anfrage.
37
When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Option 11TOPSIT multi seat unit, 10-seater (5+5) with 12 armrests
Consisting of:8 TOPSIT seats with armrests on the right-hand side,2 TOPSIT seats with armrests on both sides,1 trapezoid subframe
Dimensions:475 mm wide, 643 mm deep, total length 2975 mm
Option 10TOPSIT multi seat unit, 8-seater (4+4) with 10 armrests
Consisting of:6 TOPSIT seats with armrests on the right-hand side,2 TOPSIT seats with armrests on both sides,1 trapezoid subframe
Dimensions:475 mm wide, 643 mm deep, total length 2400 mm
Option 9TOPSIT multi seat unit, 6-seater (3+3) with 8 armrests
Laser-cut side frames, wire-mesh seat and back surfaces, 15 x 30 mmmesh pattern, 4.0 mm wire gauge, wires terminate inside specialprofile, upper wires are transverse to seat direction. With specialareas of denser mesh for additional seat strength. Galvanized andRILSAN polyamide coated, minimum thickness 350 microns.
Dimensions:475 mm wide, 643 mm deep, total length 1825 mm
Consisting of: 4 TOPSIT seats with armrests on the right, 2 TOPSIT seats with armrests on both sides, 1 trapezoid subframe
Seats and seating systems
Option 12TOPSIT-Vario multi seat unit, 4-seater with 3 armrests
100 x 100 mm square tubular supporting stand and feet, galvanized and plastic-coated. With 300 x 450 mm base plates.Each with 4 holes for bolting 100 mm below the finished floor.Other fixing options on request. TOPSIT seat, laser-cut side frames,wire-mesh seat and back surfaces, 15 x 30 mm mesh pattern, 4.0 mm wire gauge, wires terminate inside special profile, upper wires are transverse to seat direction.
With special areas of denser mesh for additional seat strength. Galvanized and RILSAN polyamide coated, minimum thickness 350 microns.
Consisting of:3 TOPSIT seats with armrests on the right-hand side,1 TOPSIT seat without armrest,1 TOPSIT-Vario subframe, total length 2070 mm.
Option 13TOPSIT-Vario multi seat unit, 6-seater with 5 armrests
Consisting of:
5 TOPSIT seats with armrests on the right-hand side,1 TOPSIT seat without armrest,1 TOPSIT-Vario subframe, total length 3150 mm.
450300
2160
450300
1080
Technische Änderungen vorbehalten.
Seats and seating systems38
We reserve the right to alter specifications without notice.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Option 14TOPSIT-Vario multi seat unit, 8-seater (4+4) with 6 armrests
Option 15TOPSIT-Vario multi seat unit, 12-seater (6+6) with 10 armrests
Consisting of:
6 TOPSIT seats with armrests on the right-hand side,2 TOPSIT seats without armrest,1 TOPSIT-Vario subframe, total length 2070 mm.
Consisting of:
10 TOPSIT seats with armrests on the right-hand side,2 TOPSIT seats without armrest,1 TOPSIT-Vario subframe, total length 3150 mm.
450300
2160
450300
1080
Bitte bei Bestellungen zusätzlich die gewünschte Standardfarbe tannengrün, rubinrot, graphitschwarz, ultramarinblau, weißaluminium, graualuminium oder reinweiß angeben. Weitere Farben auf Anfrage.
39
When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Seats and seating systems
Technische Änderungen vorbehalten.
Intersit®
ø17
200
1411
225 941
80 180
80
3
564
46
5
1391
400
220
*Holes provided for fixing if required.
Seats and seating systems40
We reserve the right to alter specifications without notice.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Option 1Erlau INTERSIT bench "remissio", 3-seaterLaser-cut frames, wire-mesh seat and back surfaces, 15 x 30 mmmesh pattern, with 2 special broad stripes of denser mesh to opti-cally conceal the flame cut parts and for additional seat strength. 4.0 mm wire gauge, wires terminate inside special profile. Benchgalvanized and RILSAN polyamide coated, minimum thickness 350microns. With two armrests. 10 year ERLAU anti-rust guarantee!Free-standing design, length 1400 mm. Feet with base plates forbolting to concrete foundation, or optionally to finished floor (FFB0) or 150/200 mm below finished floor.
Fixed type with base plateMovable type*
Option 2Erlau INTERSIT bench "remissio", 4-seaterLaser-cut frames, wire-mesh seat and back surfaces, 15 x 30 mmmesh pattern, with 2 special broad stripes of denser mesh to opti-cally conceal the flame cut parts and for additional seat strength. 4.0 mm wire gauge, wires terminate inside special profile. Benchgalvanized and RILSAN polyamide coated, minimum thickness 350microns. With three armrests. 10 year ERLAU anti-rust guarantee!Free-standing design, length 2350 mm. Feet with base plates forbolting to concrete foundation, or optionally to finished floor (FFB0) or 150/200 mm below finished floor.
Fixed type with base plateMovable type*
Option 3Erlau INTERSIT bench "remissio", 6-seaterLaser-cut frames, wire-mesh seat and back surfaces, 15 x 30 mmmesh pattern, with 4 special broad stripes of denser mesh to opti-cally conceal the flame cut parts and for strengthening the seat. 4.0mm wire gauge, wires terminate inside special profile. Upper wiresare transverse to seat direction. Bench galvanized and RILSANpolyamide coated, minimum thickness 350 microns. With threearmrests. 10 year ERLAU anti-rust guarantee! Free-standing design, length 2800 mm. Feet with base plates forbolting to concrete foundation, or optionally to finished floor (FFB 0) or 150/200 mm below finished floor.
Fixed type with base plateMovable type*
ø17
80
1315
225 941 450 941
2782
2802
187
220 180
46
5
400
Option 4Erlau INTERSIT bench "remissio", 3+3-seater (back to back)Laser-cut frames, wire-mesh seat and back surfaces, 15 x 30 mmmesh pattern, with 2 special broad stripes of denser mesh to opti-cally conceal the flame cut parts and for additional seat strength. 4.0 mm wire gauge, wires terminate inside special profile. Benchgalvanized and RILSAN polyamide coated, minimum thickness 350microns. With 2 armrests each side. 10 year ERLAU anti-rust guar-antee! Free-standing design, length 1411 mm. Feet with baseplates for bolting to concrete foundation, or optionally to finishedfloor (FFB 0) or 150/200 mm below finished floor.
Fixed type with base plateMovable type*
Option 5Erlau INTERSIT bench "remissio" , 4+4-seater (back to back)Laser-cut frames, wire-mesh seat and back surfaces, 15 x 30 mmmesh pattern, with 2 special broad stripes of denser mesh to opti-cally conceal the flame cut parts and for additional seat strength. 4.0 mm wire gauge, wires terminate inside special profile. Benchgalvanized and RILSAN polyamide coated, minimum thickness 350microns. With 2 armrests each side. 10 year ERLAU anti-rust guar-antee! Free-standing design, length 2330 mm. Feet with baseplates for bolting to concrete foundation, or optionally to finishedfloor (FFB 0) or 150/200 mm below finished floor.
Fixed type with base plateMovable type*
Option 6Erlau INTERSIT bench "remissio", 6+6-seater (back to back)Laser-cut frames, wire-mesh seat and back surfaces, 15 x 30 mmmesh pattern, with 4 special broad stripes of denser mesh to opti-cally conceal the flame cut parts and for additional seat strength. 4.0 mm wire gauge, wires terminate inside special profile. Upper wires are transverse to seat direction. Bench galvanizedand RILSAN polyamide coated, minimum thickness 350 microns. Each with 3 armrests. 10 year ERLAU anti-rust guarantee! Free-standing design, length 2802 mm. Feet with base plates forbolting to concrete foundation, or optionally to finished floor(FFB 0) or 150/200 mm below finished floor.
Fixed type with base plateMovable type*
*Holes provided for fixing if required
Bitte bei Bestellungen zusätzlich die gewünschte Standardfarbe tannengrün, rubinrot, graphitschwarz, ultramarinblau, weißaluminium, graualuminium oder reinweiß angeben. Weitere Farben auf Anfrage.
41
When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Seats and seating systems
Option 7Erlau INTERSIT wire mesh bench for the "remissio", 3-seater
Laser-cut frames, wire-mesh seat and back surfaces, 15 x 30 mmmesh pattern, with 2 special broad stripes of denser mesh to optical-ly conceal the laser-cut parts and for additional seat strength. 4.0 mm wire gauge. Wires terminate inside special profile.Bench galvanized and RILSAN polyamide coated, minimum thickness350 microns. With two armrests. 10 year ERLAU anti-rust guarantee!Rear-mounted design, length 1411 mm.For mounting in shelter "Raster 22".Optional: Bracket for mounting on wall.
Order no. 52708
Option 8Erlau INTERSIT Pagwood® bench "remissio", 3-seater
Laser-cut frames, seat and back surfaces formed by Pagwood® slatsrunning the whole width, mounted in special profile.Metal parts galvanized and RILSAN polyamide coated, minimumthickness 350 microns. With two armrests. 10 year ERLAU anti-rust guarantee! Rear-mounted design, length 1433mm. For mounting in shelter "Raster 22".Optional: Bracket for mounting on wall.
Order no. 52781
Option 9Erlau INTERSIT without backrest "sinnaplico", 3-seater
Laser-cut frame, continuous wire-mesh seat surface, 15 x 30 mmmesh pattern, with 2 special broad stripes of denser mesh to optical-ly conceal the laser-cut parts and for additional seat strength. 4.0 mm wire gauge. Bench galvanized and RILSAN polyamide coated, minimum thickness 350 microns. 10 year ERLAU anti-rustguarantee! Free-standing design. Length 1600 mm. Feet with baseplates for bolting to concrete foundation, or optionally to finishedfloor (FFB 0) or 150/200 mm below finished floor.
Fixed type with base plateMovable type*
Option 10Erlau INTERSIT without backrest, 4-seaterLaser-cut frame, continuous wire-mesh seat surface, 15 x 30 mmmesh pattern with 2 special broad stripes of denser mesh to opticallyconceal the laser-cut parts and for additional seat strength. 4.0 mmwire gauge. Bench fully galvanized and RILSAN polyamide coated,(min. thickness 350 microns). Length 1800 mm.
Feet with base plates for bolting to concrete foundation, or option-ally to finished floor (FFB 0) or 150/200 mm below finished floor.
fixed type, with base platemovable type*
Technische Änderungen vorbehalten.* Bohrungen zur möglichen Befestigung vorhanden
42 Seats and seating systems
We reserve the right to alter specifications without notice.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
*Holes provided for fixing if required
Bitte bei Bestellungen zusätzlich die gewünschte Standardfarbe tannengrün, rubinrot, graphitschwarz, ultramarinblau, weißaluminium, graualuminium oder reinweiß angeben. Weitere Farben auf Anfrage.
46
5
564
811
24
2
220
400
200
2824
13911391
217 957 434 957
80180
ø17
46
5
564
811
24
2
220
400
200
2824
13911391
217 957 434 957
80180
ø17
43
Option 12Erlau INTERSIT Pagwood® bench "remissio", 3-seaterLaser-cut frame, seat and back surfaces formed by Pagwood® slatsmade of beech veneers, impregnated with resins and pressed intoformed parts. Thus weather-resistant, easy to care for, highlyimpact and scratch resistant. Slats also protected all the way roundby laser-cut parts and special profile. All steel parts galvanized andRILSAN polyamide coated, minimum thickness 350 microns. With two feet and two armrests. Free-standing design. Length 1433 mm, depth 564 mm, seat height 465 mm. Feet with base plates for bolting to concrete foundation, or optio-nally to finished floor (FFB 0) or 150/200 mm below finished floor.
Fixed type with base plateMovable type*
Option 13Erlau INTERSIT bench with Pagwood® "remissio", 6-seaterLaser-cut frame, seat and back surfaces with Pagwood® slats,made of beech veneers, impregnated with resins and pressed intoformed parts. Thus weather-resistant, easy to care for, highlyimpact and scratch resistant. Slats also protected all the wayround by laser-cut parts and special profile. All steel parts galva-nized and RILSAN polyamide coated, minimum thickness 350microns, with 4 feet and 3 armrests. Free-standing design, length2824 mm, depth 564 mm, seat height 465 mm. Feet with baseplates for bolting to concrete foundation, or optionally to finishedfloor (FFB 0) or 150/200 mm below finished floor.
Fixed type with base plateMovable type*
Seats and seating systems
When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Option 11Erlau INTERSIT without backrest "sinnaplico", 3-seater - Pagwood® slats
Laser-cut frame, seat surface formed by Pagwood® slats running thewhole width. Bench galvanized and RILSAN polyamide coated, mini-mum thickness 350 microns. 10 year ERLAU anti-rust guarantee!Free-standing design. Length 1600 mm. Feet with base plates forbolting to concrete foundation, or optionally to finished floor (FFB 0) or 150/200 mm below finished floor.
Fixed type with base plateMovable type*
*Holes provided for fixing if required
2824
1391 1391
957957 434 217
1315
188
46
4
24
0
81
0
548 220
80
400
180
ø17
Option 14Erlau INTERSIT bench with Pagwood®, 3+3-seater (back-to-back)Laser-cut frames, seat and back surfaces with Pagwood® slats, madeof beech veneers, impregnated with resins and pressed into formedparts. Thus weather-resistant, easy to care for, highly impact andscratch resistant. Slats also protected all the way round by laser-cutparts and special profile. All steel parts galvanized and RILSANpolyamide coated, minimum thickness 350 microns. With 2 feet, each bench has 2 armrests. Free-standing design,length 1433 mm, depth 564 mm, seat height 465 mm. Feet with base plates for bolting to concrete foundation, or option-ally to finished floor (FFB) or 150 mm below finished floor.
Fixed type with base plateMovable type*
Option 15Erlau INTERSIT bench with Pagwood® "remissio", 6+6-seater(back-to-back)Laser-cut frames, seat and back surfaces with Pagwood® slats,made of beech veneers, impregnated with resins and pressed intoformed parts. Thus weather-resistant, easy to care for, highlyimpact and scratch resistant. Slats also protected all the wayround by laser-cut parts and special profile. All steel partsgalvanized and RILSAN polyamide coated, minimum thickness 350 microns. With 4 feet and each bench has 3 armrests. Free-standing design, length 2824 mm, depth 564 mm, seat height465 mm. Feet with base plates for bolting to concrete foundation,or optionally to finished floor (FFB) or 150 mm below finishedfloor.
Fixed type with base plateMovable type*
Technische Änderungen vorbehalten.
Seats and seating systems44
We reserve the right to alter specifications without notice.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
*Holes provided for fixing if required
Bitte bei Bestellungen zusätzlich die gewünschte Standardfarbe tannengrün, rubinrot, graphitschwarz, ultramarinblau, weißaluminium, graualuminium oder reinweiß angeben. Weitere Farben auf Anfrage.
fixed fixed with baseplate movable
Olympia-Nova
45
23001150
300
400
1150
575
GE AE AE
ZE
AE
AE
ZE
AE AE AE
90ϒ30ϒ
30ϒ
30ϒ
90ϒ
30ϒ
30ϒ
30ϒ
GE = basic unitAE = add-on unit
Figure: 1 basic and 1 add-on unit
Note:Erlau furniture is supplied without mounting accessories forattachment to wall or ground. This always has to be provided bythe customers.
Note on the configuration options for OLYMPIA NOVA:Each OLYMPIA NOVA configuration starts with a straight orcurved basic unit. It is then extended with add-on units.
Order no.: 5286900
Exception:Full circle, see sketch page 50. This consists of 12 x 30° add-on units.
Seats and seating systems
When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Technische Änderungen vorbehalten.
Seats and seating systems46
We reserve the right to alter specifications without notice.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Option 2Add-on unit, 1-seater, straightOLYMPIA-NOVA features: bowed seat with knee roll, backrest with plateau top, galvanized and colour-coated tubular steelfeet. Tubular steel and wire mesh seat and back parts. Seat andback parts connected by laser-cut formed parts. 30 mm externaltube diameter, 3.5 mm wire gauge, 15 x 25 mm mesh pattern, galvanized and RILSAN polyamide coated (min. thickness 350 microns).
Dimensions:(W x D x H) 575 x 700 x 820 mm, seat height 455 mm
Type A B Cfixed fixed with movable
base plate
Option 1Basic unit, 1-seater, straightOLYMPIA-NOVA features: bowed seat with knee roll, backrest with plateau top, galvanized and colour-coated tubular steelfeet. Tubular steel and wire mesh seat and back parts. Seat andback parts connected by laser-cut formed parts. 30 mm externaltube diameter, 3.5 mm wire gauge, 15 x 25 mm mesh pattern, galvanized and RILSAN polyamide coated (min. thickness 350 microns).
Dimensions:(W x D x H) 575 x 700 x 820 mm, seat height 455 mm
Type A B Cfixed fixed with movable
base plate
AE AEAEGE
575
2300
Typical combination
Option 4Add-on unit, 2-seater, straightOLYMPIA-NOVA features: bowed seat with knee roll, backrestwith plateau top, galvanized and colour-coated tubular steel feet. Tubular steel and wire mesh seat and back parts. Seat and backparts connected by laser-cut formed parts. 30 mm external tubediameter, 3.5 mm wire gauge, 15 x 25 mm mesh pattern, galva-nized and RILSAN polyamide coated (min. thickness 350 microns).
Dimensions:(W x D x H) 1150 x 700 x 820 mm, seat height 455 mm
Type A B Cfixed fixed with movable
base plate
Option 3OLYMPIA seat element, 2-seater, straightOLYMPIA-NOVA features: bowed seat with knee roll, backrestwith plateau top, galvanized and colour-coated tubular steel feet. Tubular steel and wire mesh seat and back parts. Seat and backparts connected by laser-cut formed parts. 30 mm external tubediameter, 3.5 mm wire gauge, 15 x 25 mm mesh pattern, galvanized and RILSAN polyamide coated (min. thickness 350 microns).
Dimensions:(W x D x H) 1150 x 700 x 820 mm, seat height 455 mm
Type A B Cfixed fixed with movable
base plate
GE AE AE AE
1150
4600
Typical combination
Bitte bei Bestellungen zusätzlich die gewünschte Standardfarbe tannengrün, rubinrot, graphitschwarz, ultramarinblau, weißaluminium, graualuminium oder reinweiß angeben. Weitere Farben auf Anfrage.
47 Seats and seating systems
When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Technische Änderungen vorbehalten.
Seats and seating systems48
We reserve the right to alter specifications without notice.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Option 6Add-on unit, 1-seater, 30° circular curvature, seats facing inwardsOLYMPIA-NOVA features: bowed seat with knee roll, backrest with plateau top, galvanized and colour-coated tubular steelfeet. Tubular steel and wire mesh seat and back parts.Longitudinal wires arranged radially in the Olympia style. Seat and back parts connected by laser-cut formed parts. 30 mm external tube diameter, 3.5 mm wire gauge, 15 x 25 mmmesh pattern, galvanized and RILSAN polyamide coated (min. thickness 350 microns).
Dimensions:External radius 1767 mm, depth 700 mm, height 820 mm, seat height 455 mm
Type A B Cfixed fixed with movable
base plate
Option 5Basic unit, 1-seater, 30° circular curvature, seats facing inwardsOLYMPIA-NOVA features: bowed seat with knee roll, backrest with plateau top, galvanized and colour-coated tubular steelfeet. Tubular steel and wire mesh seat and back parts.Longitudinal wires arranged radially in the Olympia style. Seat and back parts connected by laser-cut formed parts. 30 mm external tube diameter, 3.5 mm wire gauge, 15 x 25 mmmesh pattern, galvanized and RILSAN polyamide coated (min. thickness 350 microns).
Dimensions:External radius 1767 mm, depth 700 mm, height 820 mm, seat height 455 mm
Type A B Cfixed fixed with movable
base plate
AE
AE
AE
AE
AE
GE
R=1445 mm
R=1767 m
m
R=1061 mm
Typical combinationOlympia-NovaSeats facing inwards
180° semi-circle consisting of:1 x 30° basic unit5 x 30° add-on unitsSeats facing inwards
Option 8Add-on unit, 1-seater, 30° circular curvature, seats facing outwardsOLYMPIA-NOVA features: bowed seat with knee roll, backrest with plateau top, galvanized and colour-coated tubular steelfoot. Tubular steel and wire mesh seat and back parts.Longitudinal wires arranged radially in the Olympia style. Seat and back parts connected by laser-cut formed parts. 30 mm external tube diameter, 3.5 mm wire gauge, 15 x 25 mmmesh pattern, galvanized and RILSAN polyamide coated (min.thickness 350 microns).
Dimensions:External radius 1607 mm, depth 700 mm, height 820 mm, seatheight 455 mm
Type A B Cfixed fixed with movable
base plate
Option 9Armrest for Olympia NovaLaser-cut and curved part, 62 mm wide, 6 mm thick, galvanizedand colour-coated, securely screwed to fixing points on the seatand back parts. Can be retrofitted.
Option 7Basic unit, 1-seater, 30° circular curvature, seats facing outwardsOLYMPIA-NOVA features: bowed seat with knee roll, backrestwith plateau top, galvanized and colour-coated tubular steelfeet. Tubular steel and wire mesh seat and back parts.Longitudinal wires arranged radially in the Olympia style. Seatand back parts connected by laser-cut formed parts. 30 mmexternal tube diameter, 3.5 mm wire gauge, 15 x 25 mm meshpattern, galvanized and RILSAN polyamide coated (min. thickness350 microns).
Dimensions:External radius 1607 mm, depth 700 mm, height 820 mm, seatheight 455 mm
Type A B Cfixed fixed with movable
base plate
Bitte bei Bestellungen zusätzlich die gewünschte Standardfarbe tannengrün, rubinrot, graphitschwarz, ultramarinblau, weißaluminium, graualuminium oder reinweiß angeben. Weitere Farben auf Anfrage.
49 Seats and seating systems
When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
AE
AE
AE AE
AE
AE
AE
AE
AEAE
AE
AE
R=1
.608
mm
Typical combination
Full circle consisting of 12 x 30° add-on units, seats facing outwards
GE AE
AE
AE
AE
AE
R=906 mm
R=1.
189
mm
180° semi-circle consisting of:1 x 30° basic unit5 x 30° add-on unitsSeats facing outwards
Technische Änderungen vorbehalten.
Seats and seating systems50
We reserve the right to alter specifications without notice.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
530
449
285
ca. 4
00
ca. 250
Option 10Basic unit, 2-seater, straight, without backrestOlympia features: bowed seat with knee roll, galvanized and powder-coated tubular steel feet.Tubular steel and wire mesh seat, 30 mm external tube diameter,wire gauge 3.5 mm, 15 x 25 mm mesh pattern, galvanized and RILSAN polyamide coated (min. thickness 350 microns).
Dimensions:width 1135 mm, depth 530 mm, height 449 mm.
Type A B Cfixed fixed with movable
base plate
Option 11Add-on unit, 2-seater, straight, without backrest(As option 10) but with just one foot.
Type A B Cfixed fixed with movable
base plate
Option 13Add-on unit, single seat, straight, without backrest(As option 12) but with just one foot.
Type A B Cfixed fixed with movable
base plate
Option 12Basic unit, single seat, straight, without backrestOlympia features: bowed seat with knee roll, galvanized and powder-coated tubular steel feet.Tubular steel and wire mesh seat, 30 mm external tube diameter,wire gauge 3.5 mm, 15 x 25 mm mesh pattern, galvanized and RILSAN polyamide coated (min. thickness 350 microns).
Dimensions:width 635 mm, depth 530 mm, height 449 mm.
Type A B Cfixed fixed with movable
base plate
Bitte bei Bestellungen zusätzlich die gewünschte Standardfarbe tannengrün, rubinrot, graphitschwarz, ultramarinblau, weißaluminium, graualuminium oder reinweiß angeben. Weitere Farben auf Anfrage.
51 Seats and seating systems
When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
530
Technische Änderungen vorbehalten.
Seats and seating systems52
We reserve the right to alter specifications without notice.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Option 14Basic unit, single seat, curved 30°, without backrestOlympia features: bowed seat with knee roll (as option 10).Tapered Olympia seats are curved throughout, eliminating anglesand gaps between seats.Tubular steel legs galvanized and powder coated.
Dimensions:Outer radius 1600 mm, depth 530 mm, height 449 mm.
Type A B Cfixed fixed with movable
base plate
Option 15Add-on unit, single-seat, curved 30°, without backrest(As option 12) but with a single leg.
Type A B Cfixed fixed with movable
base plate
Bitte bei Bestellungen zusätzlich die gewünschte Standardfarbe tannengrün, rubinrot, graphitschwarz, ultramarinblau, weißaluminium, graualuminium oder reinweiß angeben. Weitere Farben auf Anfrage.
53 Seats and seating systems
When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Swingo®
Option 1SWINGO - folding seat with backrestMulti seat unit on 60 x 40 mm square tube, galvanized and coatedsubframe, 25 mm external diameter tubular steel seat frame, wire mesh seat and back surfaces, 9 x 18 mm mesh pattern, 3.0. mm wire gauge, galvanized and RILSAN polyamide coated.
Dimensions:width 505 mm, depth 314/512 mm, seat height 466 mm,
Type A Bfixed wall-with base- mountedplate
3-seaterOrder no. 51634 51529
Wall-mounted
Fixed with base plate
3-sitzig
1655
512314
466
512314
505 505425505
505 505425505
3-seater
Technische Änderungen vorbehalten.
Loungers, chairs, stackable benches and tables54
We reserve the right to alter specifications without notice.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
BornholmErlau therapeutic loungers ensure pleasant rest and relaxation inprivate and public environments alike. The raised seat level facili-tates getting on and off, suitable for wet areas and nursing homes.
In the latter instance, in particular, the BORNHOLM-R25 comes intoits own. With its folding armrest, this lounger can be safely usedby the elderly and infirm. Access from the side is completely unob-structed, making this model as easy to get on and off as an ordi-nary chair. The folding armrest also allows the BORNHOLM-R25 tobe used by people in wheel chairs. In just such situations, the bedheight of 46 cm is of considerable importance.
For added convenience, the BORNHOLM-R25 is now available withtwo strong wheels, making it easy to move even on rough or softground.
For the utmost convenience, a model is available featuring bothoptional extras, i.e. folding armrest and wheels.
Option 1BORNHOLM-R25 tilting therapeutic loungerTubular steel subframe, tubular steel and wire mesh detachablebed, external tube diameter 25 mm, wire gauge 3.0 mm, mesh pattern 17.5 x 17.5 mm, galvanized and RILSAN polyamide coated(min. thickness 350 microns); with abrasion resistant gliders, stackable.
Dimensions:(W x D x H) 600 x 1400 x 1040 mm, seat height 460 mm.Bed area: length 2000 mm, width 500 mm.
Type Pre-galvanizedOrder no. 52239
Option 2BORNHOLM-R25 tilting therapeutic lounger(as option 1) but with folding armrest and/or wheels.
Dimensions:(W x D x H) 600 x 1400 x 1040 mm, seat height 460 mm.Bed area: length 2000 mm, width 500 mm.
Type with- with withfolding wheels folding armrestarmrest and wheel
Order no. 51137 51132 51219
1860
1900
500
590
960
960
ElbaSunbed and sauna laounger
Option 3ELBA pool and sauna lounger, with angled head section, raised bedheight and armrests.Tubular steel frame and legs, wire mesh bed, external tube diameter 25 mm, wire gauge 3.0 mm, mesh pattern 15 x 15, galvanized and RILSAN polyamide coated (min. thickness 350 microns),with foot-caps and abrasion resistant gliders; stackable.46 cm high bed makes getting on and off easier.
Dimensions: (W x D x H) 700 x 1920 x 630 mm, bed height 460 mmBed area: length 2000 mm, width 500 mm
TypeOrder no. 56529
Bitte bei Bestellungen zusätzlich die gewünschte Standardfarbe tannengrün, rubinrot, graphitschwarz, ultramarinblau, weißaluminium, graualuminium oder reinweiß angeben. Weitere Farben auf Anfrage.
55 Loungers, chairs, stackable benches and tables
When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
OffenburgOption 1Offenburg chairTubular steel frame and legs, external tube diameter 25 mm, wiremesh seat and backrest, wire gauge 3.0 mm, mesh pattern 15 x 15 mm, RILSAN polyamide coated (min. thickness 350microns).Dimensions:width 600 mm, depth 625 mm, height 815 mm, seat height 450 mm.
Order no 58021
Option 2Omega benchTubular steel frame and legs, external tube diameter 25 mm, wire mesh seat and backrest, wire gauge 3.0 mm, mesh pattern 15 x 15 mm, RILSAN polyamide coated (min. thickness 350 microns).
Dimensions:width 1200 and 1600 mm*, depth 625 mm, height 808 mm, seat height 450 mm.
Order no. 52099*)Type 1600 mm with a 34 mm tube diameter
Option 3Florenz chairTubular steel frame and legs, external tube diameter 22 mm, wire mesh seat and backrest, wire gauge 3.0 mm, mesh pattern 15 x 15 mm, RILSAN polyamide coated (min. thickness 350 microns).
Dimensions:width 600 mm, depth 625 mm, height 815 mm, seat height 450 mm.
Order no. 51241
Option 4Triberg chairTubular steel frame and legs, external tube diameter 18 mm, wire mesh seat and backrest, wire gauge 3.0 mm, mesh pattern 15 x 15 mm, RILSAN polyamide coated (min. thickness 350 microns).
Dimensions:width 600 mm, depth 625 mm, height 815 mm, seat height 450 mm.
Order no. 51061
Option 5Rothenburg chairTubular steel frame and legs, external tube diameter 25 mm, wire mesh seat and backrest, wire gauge 3.0 mm, mesh pattern 15 x 15 mm, RILSAN polyamide coated (min. thickness 350 microns), without armrests.
Dimensions:width 550 mm, depth 600 mm, height 835 mm, seat height 450 mm.
Order no. 58072
Technische Änderungen vorbehalten.
Loungers, chairs, stackable benches and tables56
We reserve the right to alter specifications without notice.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Bitte bei Bestellungen zusätzlich die gewünschte Standardfarbe tannengrün, rubinrot, graphitschwarz, ultramarinblau, weißaluminium, graualuminium oder reinweiß angeben. Weitere Farben auf Anfrage.
57 Loungers, chairs, stackable benches and tables
When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Option 6Tabula-NOVA tableSubframe galvanized and powder coated, top consists of steel tubing and wire mesh, external tube diameter 25 mm, wiregauge 3.0 mm, mesh pattern 15 x 15 mm, galvanized and RIL-SAN polyamide coated (min. thickness 350 microns).
Dimensions:Width 1200 mm, depth 800 mm, table height 730 mmWidth 2000 mm, depth 800 mm, table height 730 mm
Width 1200 mm Width 2000 mmOrder no. 52575 52185
At an extra charge and upon request, the feet are available withboreholes for fixing the table to the floor.
Option 7Mensa-NOVA tableTubular steel and wire mesh, external tube diameter 30 mm, wire gauge 3.0 mm, mesh pattern 15 x 15 mm, galvanized and RILSAN polyamide coated (min. thickness 350 microns).
Dimensions: width 800 mm, depth 800 mm, height 730 mm.
Order no. 52576
At an extra charge and upon request, the feet are available withboreholes for fixing the table to the floor.
Option 8Lawn-saver feetPolyamide, reinforced with stainless steel lining.
Colour White Black
Offenburg Order no.. 5030001 5030002Omega Order no. 5030001 5030002Florenz Order no.. 5031001 5031002Triberg Order no.. 0504985 506985
Option 9Foot capsReinforced with stainless steel lining
Colour White Black
Offenburg Order no. 504975 506975Omega Order no. 504975 506975Florenz Order no. 504965 506965Triberg Order no. 504805 506805Rothenburg Order no. 504975 506975
Option 10Nameplate for Offenburg/Rothenburg chairsMax. 14 letters including spaces, welded into wire mesh.Minimum quantity: 25
Order no. 50980
Technische Änderungen vorbehalten.
Loungers, chairs, stackable benches and tables58
We reserve the right to alter specifications without notice.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
ParadorOption 1PARADOR - multi seat unitHot-dip galvanized, tubular steel frame, 38 mm external tube diameter, wire mesh seat and table surfaces, 3.0 mm wire gauge.15 x 15 mm mesh pattern, galvanized and RILSAN polyamide coated (min. thickness 350 microns).
Dimensions: Total length 1600 mm Seat height 420 mmTotal depth 1800 mm Seat depth 350 mmTotal heigth 720 mm Table width 800 mm
Type movable fixedOrder no. 52535 52536
Option 2PARADOR - multi seat unitHot-dip galvanized, tubular steel frame, 38 mm external tubediameter, wire mesh seat surfaces, 3.0 mm wire gauge. 15 x 15mm mesh pattern, galvanized and RILSAN polyamide coated(min. thickness 350 microns), Werzalit granite pattern table sur-face.
Dimensions: Total length 1600 mm Seat height 420 mmTotal depth 1800 mm Seat depth 350 mmTotal heigth 720 mm Table width 960 mm
Type movable fixedOrder no. 52538 52539
Note:The movable type is equipped with gliders, whereas the fixedvariant has 4 ground anchors for concreting in.
TivoliOption 1TIVOLI park loungerTubular steel frame, external tube diameter 34 mm, wire meshbed, wire gauge 3.0 mm, mesh pattern 15 x 15 mm, galvanizedand RILSAN polyamide coated (min. thickness 350 microns), bed profiled in accordance with average anatomical measurements; with screw-mounted gliders.
Dimensions:(W x L x H) 650 x 1944 x 636 mm
Order no. 59469
Note:The movable type is equipped with gliders, whereas the fixed vari-ant has 4 ground anchors for concreting in.Table and bench combination with wire mesh benches and tried-and-tested Werzalit tabletop with granite pattern.Other tabletop colours on request.
With its exclusive, avant-garde design, the TIVOLI park lounger makes an eye-catching feature in any leisure complex or health resort.
Bitte bei Bestellungen zusätzlich die gewünschte Standardfarbe tannengrün, rubinrot, graphitschwarz, ultramarinblau, weißaluminium, graualuminium oder reinweiß angeben. Weitere Farben auf Anfrage.
59 Bicycle parking systems
When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
631
257,5
1034
ø 42,6
475
375
846
546
631
257,5
734
ø 200
475
375
552
ArcodosThe pronounced high-low positions allow parking in the smallest space. Can also be used for bicycles with "exotic" handlebars without getting them entangledwith the handlebars and cables of adjacent cycles. Very gentle on spokes and rims.
Option 1ARCODOS Hi-Lo bicycle stand Holds the front wheel, wheel spacing 37.5 cm, tubular 42 mmdiameter frame, with 2 holding loops.Central foot with anti-theft ring. Hot-dip galvanized with orwithout a colour coating.Dimensions: W 475 mm, H: 734 mm from finished floor
Type fixed with round baseOrder no. Order no.
Colour coated 52369 58439
Hot-dip galvanized 5236917 5003571
Fixed with round base
For concreting in
Technische Änderungen vorbehalten.
Bicycle parking systems60
We reserve the right to alter specifications without notice.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
1100
780 268380
580
ø42.4x2.6
300147,8
800
780 268380
580
ø200
Berlin support stand, fixed with round base
Berlin
Berlin support standwith round base
Option 1Berlin support standUniversal bicycle support stand of curved steel tube, external tubediameter 50 mm, with 2 plastic clamps for holding the bicycleframe and integrated steel ring for additional security againsttheft. Hot-dip galvanized with or without a colour coating.Can also be used as a normal support stand without using the clamps.Dimensions: (W x H x D) 800 x 800 x 380 mmHeight to middle of clamp 580 mm
Type Fixed with round baseOrder no.
Galvanized and 52196coated steel
Hot-dip galvanized steel 5219617
Berlin support stand, for concreting in
Berlin support stand for concreting in
Option 2Berlin support stand(as option 1) but for concreting in.Dimensions: (W x H x D) 800 x 800 x 380 mmHeight from finished floor to middle of clamp 580 mm.
Type For concreting inOrder no.
Galvanized and 52286coated steel
Hot-dip galvanized steel 5228617
Can also be used on connecting mounting rail, see Velofox illustration
Bitte bei Bestellungen zusätzlich die gewünschte Standardfarbe tannengrün, rubinrot, graphitschwarz, ultramarinblau, weißaluminium, graualuminium oder reinweiß angeben. Weitere Farben auf Anfrage.
61
Pedalo®
Option 1PEDALO bicycle stands for embedding in concreteStrong, compact, well designed bicycle stand made of curvedtubular steel, external tube diameter 50 mm, with plastic clamp for holding the bicycle frame and steel ring for use with a cable,chain or U-lock for additional security against theft. Hot-dip galvanized with or without a colour coating.
Dimensions: (W x H) 345 x 975/625 mm
Type For embedding in concreteOrder no. Order no.Pedalo Solo Pedalo Duo
Galvanized and 51923 2 x 51923coated steel
Hot-dip galvanized steel 5192317 2 x 5192317
Stainless steel 5205123 2 x 5205123
Option 2PEDALO bicycle stand with round base plate(As option 1) but with round, welded base plate for boltingdown.
Type Fixed with base plateOrder no. Order no.Pedalo Solo Pedalo Duo
Galvanized and 52043 51838coated steel
Hot-dip galvanized steel 5204317 5183817
Stainless steel 5204323 5183823
Bicycle parking systems
When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
PEDALO SOLO PEDALO DUO
PEDALO stands consist of a curved steel tube with a plastic clampand an integral steel ring which, in conjunction with one's ownchain, provides optimal protection against theft.One of the chief advantages of the new Erlau PEDALO cycle stand isthat it is designed to secure the bicycle by its frame, preventing itfrom falling or being blown over, or rolling away on a slope.As soon as the frame is gripped by the clamp, both hands are leftfree to deal with e.g. saddle bags, a shopping basket or child's seat.
PEDALO DUO with round base
PEDALO SOLOWith round base
min. 60 cm
b
a
(190 cm)
Ais
lew
idth
10
0 -
12
0 c
m
min
. 120
cm
150 cm 150 cm
min. 10 cm
147 cm
Ais
lew
idth
100
- 12
0 cm
min. 60 cm
PEDALO DUO
PEDALO SOLO
min. 60 cm
252
cm
(190
cm
)
Layout along a wall Straight layout
Technische Änderungen vorbehalten.
Bicycle parking systems62
We reserve the right to alter specifications without notice.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Circular layout Angled layout
Bitte bei Bestellungen zusätzlich die gewünschte Standardfarbe tannengrün, rubinrot, graphitschwarz, ultramarinblau, weißaluminium, graualuminium oder reinweiß angeben. Weitere Farben auf Anfrage.
63
Pedalo® Hi-LoOption 1PEDALO Hi-Lo bicycle standRobust, space-saving bicycle stand for two cycles (40 cm apart) madeof 50 mm curved tubular steel with plastic clamps to secure cyclesby the frame and steel ring for additional protection against theft.Hot-dip galvanized with or without a colour coating. Raised frontwheel bracket features wire mesh lining and anti-twist flanged rims.
Dimensions: (W x H) 528 x 770 mm (from floor level)
Type fixed with square with round basebase 200 mm150 x 150 mm
Order no. 5120899 5121399 5120999
Option 2PEDALO Hi-Lo 50 bicycle stand with GACC recommendationRobust, space-saving bicycle stand for two cycles (50 cm apart)with plastic clamps to secure cycles by the frame and steel ringsfor additional protection against theft. Hot-dip galvanized with or without a colour coating. Raised frontwheel bracket features wire mesh lining and anti-twist fixing inhigh and low positions. With additional front wheel fixation for the lower parking position.
Type fixed with square with base platebase for bolting down150 x 150 mm
Order no. 51742 51725 51743
Bicycle parking systems
When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
With square base plate,to be secured 270 mmbelowfloor level
Floor mounting accessories not included
Fixed Fixed, with roundbase plate for bolting to floor
PEDALO Hi-Lo, GACC design
PEDALO Hi-Lo, fixed installation
236
770
1070
1070
300
ca.4
00
876
The German Association of Cycling Clubs recommendsPedalo Hi-Lo stands be positioned so that the wheels ofadjoining cycles are 50 cm apart.Recommended quality Q 9613 (GACC seal of approval)
650
ϒ
ϒ
PEDALO Hi-Lo, single row
PEDALO Hi-Lo, two rows, staggered
PEDALO Hi-Lo, 30-degree angled layout
PEDALO Hi-Lo, 45-degree angled layout
Technische Änderungen vorbehalten.
Bicycle parking systems64
We reserve the right to alter specifications without notice.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Option 2Universal connecting mounting rail for bicycle stands (withoutdirty corners) - no foundations needed -Velofix, Arcodos, Pedalo, Hi-Lo and Berlin support stand, forcycle spacings of 40 cm, hot-dip galvanized, for dowelling to thefinished floor, plate thickness 3.0 mm, height 19 mm.
For two bicycle stands, 1600 mm long for four bicycles
For three bicycle stands, 2400 mm long for six bicycles
The scope of delivery does not include bolts or dowels.
800
All Erlau bicycle stands with round bases can be mountedon this universal connecting rail.
Bitte bei Bestellungen zusätzlich die gewünschte Standardfarbe tannengrün, rubinrot, graphitschwarz, ultramarinblau, weißaluminium, graualuminium oder reinweiß angeben. Weitere Farben auf Anfrage.
65
VelofoxVELOFOX bicycle stand
This product allows the frame and front wheel to be secured, thus fulfilling the latest anti-theft recommendations of police andinsurance companies. The double loops in the insertion areaenable the bicycle to be wheeled in and out with one hand on thesaddle. The pronounced high-low positions enable a great deal ofspace to be saved. A cycle spacing of only 37.5 cm is achieved with-out handlebars and cables getting tangled.
The conically tapering centring loop does not damage eitherwheel rims or spokes. The hot-dip galvanized design can be recom-mended without reservations, especially for schools, "bike andride" and other areas.
Bicycle parking systems
When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Option 1VELOFOX Hi-Lo bicycle standRobust and very space-saving bicycle stand for two bicycles at aspacing of 37.5 cm. Made of curved steel tube, 42 mm diameterwith two holding loops for protective guiding and holding thefront wheel. Central hoop for securing the front wheel andframe against theft. Hot-dip galvanized with or without a colourcoating.Dimensions: W 475 mm, H: 850 mm from finished floor.
Type Fixed With round baseOrder no. Order no.
Colour coated 52368 52280
Hot-dip galvanized 5236817 5228017
824
734
ø 200
475
375
510
220
850
824
850
63
475
375
510
220
1150
Fixed with round base
Fixed for concreting in
Option 2VELOFOX Hi-Lo bicycle standused with connecting mounting rail
Robust and very space-saving bicycle stand for two bicycles at aspacing of 37.5 cm. Made of curved steel tube, 42 mm diameter,with two holding loops for protective guiding and holding thefront wheel. Central hoop for securing the front wheel andframe against theft, with special base plate for bolting to mount-ing rail. Hot-dip galvanized with or without a colour coating.
Dimensions:W 475 mm, H: 850 mm from finished floor, overall height 970 mm
Type Fixed with base plate for mounting railOrder no.
Colour coated 52431
Hot-dip galvanized 5243117
Technische Änderungen vorbehalten.
Bicycle parking systems66
We reserve the right to alter specifications without notice.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
824
147,8
970
80
Technische Änderungen vorbehalten.
400
1600
min
300
13881388
571
min 800 min 2723
min 1654
min 4933
343
523
2776
min
270
0
min 5500
67
Veloport®
Bicycle parking systems
When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
A standard VELOPORT module enables 8 bicycles to be parked in a width of only 1.60 m.
Please tell us about your actual case, preferably providing us with the relevant ground plan. We will then work out a detailed offer for you. Naturally we will also be pleased to advise you on site.
Veloport variants
Veloport 1600 single double8 places 16 places
Order no. 5229717 5230017
Veloport 2400 single double12 places 24 places
Order no. 5238717 5238417
Veloport 3200 single double16 places 32 places
Order no. 5238817 5238517
Veloport 4000 single double20 places 40 places
Order no. 5238917 5238617
Bitte bei Bestellungen zusätzlich die gewünschte Standardfarbe tannengrün, rubinrot, graphitschwarz, ultramarinblau, weißaluminium, graualuminium oder reinweiß angeben. Weitere Farben auf Anfrage.
Planters68
We reserve the right to alter specifications without notice.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
LUNAFLOR planter enclosureTubular steel frame, 34 mm external tube diameter, 15 x 30 mmwire mesh surfaces, 3.0 wire gauge, galvanized and RILSANpolyamide coated, minimum thickness 350 microns, 721 mm diameter, 890 mm radius, hot-dip galvanized inner container, with 2 lifting loops welded on at the bottom, which extend to 10 cm below the top edge of the plant level which makes themeasy to lift with a fork lift or crane.
Order no. Height DiameterOption 1 52364 506 mm Full circle 360°
Option 2 52365 416 mm 3/4 circle 270°
Option 3 52429 326 mm 3/4 circle 270°
Options 2+3 only in combination with option 1.
Lunaflor®
326
721
416
721
506
721
Option 3LUNAFLOR 270° low
Option 2LUNAFLOR 270° complete
Option 1 LUNAFLOR 360° complete
506
416
326
Bitte bei Bestellungen zusätzlich die gewünschte Standardfarbe tannengrün, rubinrot, graphitschwarz, ultramarinblau, weißaluminium, graualuminium oder reinweiß angeben. Weitere Farben auf Anfrage.
69 Planters
When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Planta
1639
R 890
1513
1246
721
R 89
0
1639
R 890
1771
721
R 89
0
Typical combinations
Other combinations can be created.
Option 1PLANTA planter enclosureTubular steel frame, two-piece, 38 mm external tube diameter,15 x 15 mm mesh pattern surfaces, 3.0 mm wire mesh, galvanizedand RILSAN polyamide coated (min. thickness 350 microns).
Dimensions: (W x L x H) 925 x 925 x 550 mm
Order no. 51205
Plastic linerOrder no. 0500851
A B C D E
A B C D E
A
Bitte bei Bestellungen zusätzlich die gewünschte Standardfarbe tannengrün, rubinrot, graphitschwarz, ultramarinblau, weißaluminium, graualuminium oder reinweiß angeben. Weitere Farben auf Anfrage.
70
Arcus
Bollards | Leaning posts
Option 1ARCUS bollards, fixedWith extended tubular frame for concreting in, with wire meshinsert with or without hook-in eyelets, 42.5 mm external tube diameter, galvanized and coated.
Dimensions: (W x H) 138 x 900/1250 mm.
Type A B C D EOrder no. 51305 51306 51307 51308 51309
with reflectorsOrder no. 51419 51420 51421 51422 51435
Option 2ARCUS bollards, with round base(As option 1) but for bolting downDimensions (W x H) 138 x 900 mm.
Type A B C D EOrder no. 51310 51311 51312 51313 51314
with reflectorsOrder no. 51424 51425 51426 51427 51428
Option 3ARCUS bollards, removable and lockable(As option 1) locked with triangular lock 17 mm - DIN 22417, with square base plate and ground sleeves for concreting in.
Dimensions: (W x H) 138 x 900 mm.
Type A with reflectorsOrder no. 51315 51430
148
900
1250
148
900
700
ca. 4
00
When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Aortsfest
Bortsfest
Technische Änderungen vorbehalten.
Bollards | Leaning posts71
We reserve the right to alter specifications without notice.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Option 4ARCUS bollards, folding and lockable(As option 1) locked with triangular lock 17 mm - DIN 22417, with square base plate for bolting down.Dimensions (W x H) 138 x 900 mm.
Type A with reflectorsOrder no. 51316 51433
Option 5ARCUS bollards, folding, with ABUS cylinder lock(As option 1) removable profile half cylinder lock, no problemswith frost or dirt because the lock is only in the bollard when itis locked, i.e. standing upright. Special polyurethane impact pro-tection. Dimensions (W x H) 138 x 900 mm.
Type B fixed with base plate/without mounting accessories
Order no. 51596 51597
incl. reflectors
Option 6 (not illustrated)Triangular lock 17 mm as per DIN 22417
Order no. 0501088
Option 7Mesh barrier for ARCUSTubular steel frame, 38 mm external tube diameter, wire mesh surface, 15 x 15 mm mesh pattern, 3.0 mm wire gauge.Galvanized and RILSAN polyamide coated, with 4 hook-in eyeletsincl. screws for fixing to bollard.
Dimensions: (W x H) 2000 x 600 mm.
Order no. 51303
Option 8Reflector for ARCUS and ICARUS
Dimensions: (W x H) 50 x 120 mm.
Order no. 0500867
2 reflectors are needed for each ARCUS/ICARUS.
Option 9ICARUS bollards, folding and lockable(car-parking spaces)42.5 mm external tube diameter, with wire mesh insert, galva-nized and coated, with 200 x 100 mm rectangular base plate forbolting down.
Dimensions: (W x H) 448 x 900 mm.
Type with reflectorsOrder no. 51304 51434
Without accessories for ground mounting
UnisonoUNISONO bollard, flat head, 1 grooveSteel body, round, galvanized and coated, standard version steelglimmer DB 701 and DB 703, standard height 900 mm above fin-ished floor, aluminium head coated to match the body. Fixed, forembedding in concrete, with ground rosette.
Diameter: 76mm, 90mm, 108mm, 121mm, 160mm and 220* mm
*For 220 mm diameter, a choice of over-floor height: 600/700 or800 mm
UNISONO bollard, flat head, 1 groove, removableSteel body, round, galvanized and coated, standard version steelglimmer DB 701 and DB 703, standard height 900 mm above fin-ished floor, aluminium head coated to match the body.Removable, with ground sleeve and ground rosette.
Diameter: 76mm, 90mm, 108mm, 121mm, 160mm and 220* mm
*For 220 mm diameter, a choice of over-floor height: 600/700 or800 mm
UNISONO bollard, flat head with Pagwood® insert, 1 grooveSteel body, round, galvanized and coated, standard version steelglimmer DB 701 and DB 703, standard height 900 mm above fin-ished floor, aluminium head coated to match the body. Fixed, forembedding in concrete, with ground rosette.
Diameter 121 mm
UNISONO bollard, flat head with Pagwood® insert, 1 groove,removableSteel body, round, galvanized and coated, standard version steelglimmer DB 701 and DB 703, standard height 900 mm above fin-ished floor, aluminium head coated to match the body.Removable, with ground sleeve and ground rosette.
Diameter 121 mm
72 Bollards | Leaning posts
When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
UNISONO bollard, spherical headSteel body, round, galvanized and coated, standard version steelglimmer DB 701 and DB 703, standard height 900 mm above fin-ished floor. Fixed, for embedding in concrete, with groundrosette.
Diameter: 76mm, 90mm, 108mm, 121mm and 160mm
UNISONO bollard, spherical head, removableSteel body, round, galvanized and coated, standard version steelglimmer DB 701 and DB 703, standard height 900 mm abovefinished floor. Removable, with ground sleeve and rosette.
Diameter: 76mm, 90mm, 108mm, 121mm and 160mm
UNISONO bollard, half-round head, 1 grooveSteel body, round, galvanized and coated, standard version steelglimmer DB 701 and DB 703, standard height 900 mm above fin-ished floor, aluminium head coated to match the body. Fixed, forembedding in concrete, with ground rosette.
Diameter: 76mm, 90mm, 108mm, 121mm, 160mm and 220* mm
*For 220 mm diameter, a choice of over-floor height: 600/700 or800 mm
UNISONO bollard, half-round head, 1 groove, removableSteel body, round, galvanized and coated, standard version steelglimmer DB 701 and DB 703, standard height 900 mm above fin-ished floor, aluminium head coated to match the body.Removable, with ground sleeve and rosette.
Diameter: 76mm, 90mm, 108mm, 121mm, 160mm and 220* mm
*For 220 mm diameter, a choice of over-floor height: 600/700 or800 mm
Technische Änderungen vorbehalten.
Bollards | Leaning posts73
We reserve the right to alter specifications without notice.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Bitte bei Bestellungen zusätzlich die gewünschte Standardfarbe tannengrün, rubinrot, graphitschwarz, ultramarinblau, weißaluminium, graualuminium oder reinweiß angeben. Weitere Farben auf Anfrage.
74 Bollards | Leaning posts
When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Metro
Option 1METRO-S leaning postFixed, with extended tubular frame for concreting in, tubularsteel and wire mesh, 42 mm external tube diameter, 3.0 mm wiregauge, 15 x 15 mm mesh pattern, with foot rest, galvanized andcoated.
Dimensions: (W x H) 306 x 2000 mm.
Type fixedOrder no. 51521 ca. 550
306
ca.6
00
260
Option 2METRO-P leaning post(As option 1)Fixed, with base plateDimensions: (W x H) 306 x 1500 mm.
Type fixed with base plateOrder no. 51522
Without accessories for ground mounting
Technische Änderungen vorbehalten.
Litter bins75
We reserve the right to alter specifications without notice.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
CambioCAMBIO litter bin, with lid, capacity 80 l, wire meshSteel, galvanized and colour coated, octagonal, with up-front,hinged door opening, lockable with triangular lock, on smallrecessed base, inner liner of sheet steel, both front and back sideswith 3 lengthwise recesses with wire mesh decorative inserts,matches Erlau mesh benches.Width 530 mm, depth 410 mm, height 1068 mm
Fixed, for dowelling to cement foundationMovable with a concrete weight (at extra cost)
Available upon request, stainless steel ashtray integrated into the side.
CAMBIO litter bin, with lid, capacity 80 l, Pagwood® insertSteel, galvanized and colour coated, octagonal, with up-front,hinged door opening, lockable with triangular lock, on smallrecessed base, inner liner of sheet steel, both front and back sideswith 3 lengthwise recesses with Pagwood® decorative inserts,matches Erlau Pagwood® benches.Width 530 mm, depth 410 mm, height 1068 mm
Fixed, for dowelling to cement foundationMovable with a concrete weight (at extra cost)
Available upon request, stainless steel ashtray integrated into the side.
CAMBIO litter bin, with lid, capacity 80 l, polyacrylic insertSteel, galvanized and colour coated, octagonal, with up-front,hinged door opening, lockable with triangular lock, on smallrecessed base, inner liner of sheet steel, both front and back sideswith 3 lengthwise recesses with Polyacrylic decorative inserts.Width 530 mm, depth 410 mm, height 1068 mm
Fixed, for dowelling to cement foundationMovable with a concrete weight (at extra cost)
Available upon request, stainless steel ashtray integrated into the side.
Bitte bei Bestellungen zusätzlich die gewünschte Standardfarbe tannengrün, rubinrot, graphitschwarz, ultramarinblau, weißaluminium, graualuminium oder reinweiß angeben. Weitere Farben auf Anfrage.
76
Vasura®
Option 1Litter bins, steel, without cover, capacity 20 lBin can be detached and locked in position (triangular lock).Dimensions (W x H) 328 x 430 mm, bin - 245 mm.
Type Model Model Model20 O 20 S 20 Wfixed with wall-mounted
hoopsGalvanized and completely colour coatedOrder no. 51458 51462 51464
Fully hot-dip galvanized (without colour coating)Order no. 5145717 5146117 5146317
Aluminium linerOrder no. 0501427
Option 2Litter bins, steel, with ashtray, without cover, capacity 20 l(As option 1) but with ashtray, matching perforated stainlesssteel liner and side slot.
Type Model Model Model20 O-A 20 S-A 20 W-Afixed with wall-mounted.
hoopsGalvanized and completely colour coatedOrder no. 51490 51494 51496
Fully hot-dip galvanized (without colour coating)Order no. 5148917 5149317 5149517
Aluminium linerOrder no. 5002117
Model 20 O
fixed
Aluminium
liner
Typ 20 S
with hoops
Typ 20 W
for wall-
mounting
Typ 20 O-A
fixed with
ashtray insert
Typ 20 S-A
with hoops
and ashtray insert
Typ 20 W-A
for wall-mounting with
ashtray insert
ca. 300
ca. 4
00
250
353
430
830
(250
)
Typ 20 O
fixed with post
ca. 300
ca. 4
00
830
100
250
430
353
(250
)
Litter bins
When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Option 3Stainless steel ashtray insertAluminium ashtray and matching perforated stainless steel liner, to fit all litter bins, capacity 20 l.
Type Ashtray Perforated linerOrder no. 0501357 0501137
365
245
295
1060
1060 43
0
ca. 300ca
. 400
250
ca. 300
ca. 4
00
295
245
830
1060
100
365
250
Typ 20 O-Dfixed,with tubular post
Typ 20 O-A-Dfixed,with tubular post
Typ 20 O-Dfixed,with lid
Aluminiumliner
Typ 20 S-Dwith hoops and lid
Typ 20 W-Dfor wall-mounting,with lid
Typ 20 O-A-Dfixed, with ashtray and lid
Aluminium liner
Typ 20 S-A-Dwith hoops and ashtray
Typ 20 W-A-Dfor wall-mounting,with ashtray and lid
Option 4Steel litter bins, with cover, capacity 20 l.Bins can be detached, tilted downwards (held by a chain) and locked.Dimensions (W x H) 365 x 430 mm, bin - 245 mm.
Type Model Model Model20 O-D 20 S-D 20 W-Dfixed with wall-mounted
hoopsGalvanized and completely colour coatedOrder no. 51474 51478 51480
Fully hot-dip galvanized (without colour coating)Order no. 5147317 5147717 5147917
Aluminium linerOrder no. 0501427
Option 5Steel litter bins, with ashtray and lid, capacity 20 l.(As option 4), but with ashtray and matching perforated stain-less steel liner, and side slot.
Type Model Model Model20 O-A-D 20 S-A-D 20 W-A-Dfixed with wall-mounted
hoopsGalvanized and completely colour coatedOrder no. 51506 51510 51512
Fully hot-dip galvanized (without colour coating)Order no. 5150517 5150917 5151117
Aluminium linerOrder no. 5002117
Technische Änderungen vorbehalten.
Litter bins77
We reserve the right to alter specifications without notice.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Bitte bei Bestellungen zusätzlich die gewünschte Standardfarbe tannengrün, rubinrot, graphitschwarz, ultramarinblau, weißaluminium, graualuminium oder reinweiß angeben. Weitere Farben auf Anfrage.
78 Litter bins
Option 6Steel litter bin without lid, capacity 35 l.Bin can be detached and locked in position (triangular lock).Dimensions (W x H) 390 x 525 mm, bin - 300 mm diameter.
Type Model 35 O fixedGalvanized and completely colour coatedOrder no. 51466
Fully hot-dip galvanized (without colour coating)Order no. 5146517
Aluminium linerOrder no. 0501429
Option 7Steel litter bins with ashtray, without lid, capacity 35 l.(As option 6) but with ashtray and matching stainless steel per-forated insert, and side slot.
Type Model 35 O-A fixedGalvanized and completely colour coatedOrder no. 51498
Fully hot-dip galvanized (without colour coating)Order no. 5149717
Aluminium linerOrder no. 5002118
300
405
830
520
ca. 4
00
(250
)
ca.300
Typ 35 Ofixed, with post
Typ 35 Ofixed
Aluminium liner
Option 8Litter bins, with stainless steel container, without lid, capacity 35 lBin can be detached and locked in position (triangular lock).Dimensions (W x H) 390 x 525 mm, bin - 300 mm diameter.Steel frame, galvanized and colour coated.
Type Model 35 O Stainless steelOrder no. 52577
Aluminium linerOrder no. 5002118
300
405
830
520
ca. 4
00
(250
)
ca.300
Typ 35 Ofixed, with post
Typ 35 Ofixed
Aluminium liner
Aluminium liner
300
405
830
520
ca. 4
00
(250
)
120
ca. 300
Typ 35 O-Afixed, with post
Typ 35 O-Afixed, withpost
When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Option 11Litter bins, steel, with lid, capacity 35 lBin can be detached, tilted downwards (held by a chain) and locked in position (triangular lock).Dimensions (W x H) 390 x 525 mm, bin - 300 mm diameter.
Type Model Model35 O-D 35 M-Dfixed movable
Galvanized and completely colour coatedOrder no.. 51482 51484
Fully hot-dip galvanized (without colour coating)Order no. 5148117 5148317
Aluminium linerOrder no. 0501429
Option 12Litter bins, with ashtray and lid, capacity 35 l(As option 8) but with ashtray and matching stainless steel perforated liner, and side slot.
Type Model Model35 O-A-D 35 M-A-Dfixed movable
Galvanized and completely colour coatedOrder no. 51514 51516
Fully hot-dip galvanized (without colour coating)Order no. 5151317 5151517
Aluminium linerOrder no. 5002118
ca. 300
ca. 4
00
300
440
830
1060
ca. 125
250
Typ 35 O-Dfixed, with post
Typ 35 O-Dfixed, with lid
Typ 35 M-Dmovable with lid
Option 9Litter bins, with ashtray, stainless steel container, without lid, capacity 35 lBin can be detached and locked in position (triangular lock).Dimensions (W x H) 390 x 525 mm, bin - 300 mm diameter, withashtray and matching stainless steel perforated liner. Steel frame, galvanized and colour coated.
Type Model 35 O-A stainless steelOrder no. 52578
Aluminium linerOrder no. 5002118
Aluminium liner
300
405
830
520
ca. 4
00
(250
)
120
ca. 300
Typ 35 O-Afixed, with post
Typ 35 O-Afixed,with post
ca. 300
ca. 4
00
300
440
830
106
ca. 85
(250
)
120
520
Typ 35 O-A-Dfixed, with post
Typ 35 O-A-Dfixed, with post
Typ 35 M-A-Dmovable with lid
Option 10Ashtray insertAluminium ashtray consisting of aluminium container andmatching perforated stainless steel liner, to fit all litter bins,capacity 35 l.
Type Ashtray Perforated linerOrder no. 0501358 0501138
Technische Änderungen vorbehalten.
Litter bins79
We reserve the right to alter specifications without notice.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Bitte bei Bestellungen zusätzlich die gewünschte Standardfarbe tannengrün, rubinrot, graphitschwarz, ultramarinblau, weißaluminium, graualuminium oder reinweiß angeben. Weitere Farben auf Anfrage.
80 Litter bins
When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Option 15Ashtray insertAluminium ashtray and matching perforated stainless steel linerfor all litter bins, capacity 35 l.
Type Ashtray Perforated linerOrder no. 0501358 0501138
Option 13Litter bins, with stainless steel container, with lid, capacity 35 lThe bins can be detached, and locked in position. (Triangular lock)Dimensions (W x H) 390 x 525 mm, bin diameter 300 mm.Steel frame and lid, galvanized and colour-coated.
Type Model Model35 O-D 35 M-Dstainless steel stainless steelfixed movable
Order no. 51977 51979
Aluminium linerOrder no. 5002118
Option 14Litter bins with ashtray and lidStainless steel container, capacity 35 lThe bins can be detached and locked in position. (Triangular lock)Dimensions (W x H) 390 x 525 mm, bin diameter 300 mm.Steel frame and lid, galvanized and colour-coated.
Type Model Model35 O-A-D 35 M-A-Dstainless steel Nirostafixed movable
Order no. 51982 51983
Aluminium linerOrder no. 5002118
ca. 300
ca. 4
00
300
440
830
1060
ca. 125
250
Typ 35 O-Dfixed, withpost
Typ 35 O-Dfixed, with lid
Typ 35 M-Dmovable with lid
ca. 300
ca. 4
00
300
440
830
106
ca. 85
(250
)
120
520
Typ 35 O-A-Dfixed, with post
Typ 35 O-A-Dfixed, with post
Typ 35 M-A-Dmovable
Technische Änderungen vorbehalten.
Litter bins81
We reserve the right to alter specifications without notice.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
ca. 4
00
535
ca. 2
75
365
600
960
1223
Option 16Steel litter bins, without lid, capacity 60 l.Bin can be swivelled, unhooked and locked (triangular lock).
Dimensions: (W x H) 535 x 600 mm, bin diameter - 365 mm.
Type Model Model60-O 60-Mfixed movable
Galvanized and colour-coated, hot-dip galvanized tubular frame.Order no. 51256 51258
Galvanized and completely colour-coatedOrder no. 51255 51257
Fully hot-dip galvanized (without colour-coating)Order no. 5923917 5933917
Stainless steel bin, hot-dip galvanized and colour-coated tubular frameOrder no. 5923923 5933923
Aluminium linerWith 2 handles, can also be used with litter bin model 60 lDimensions: (H) 590 mm, diameter 345 mm.
Order no. 0501431
Option 17Steel litter bin, without lid, capacity 60 l, with ashtrayBin can be swivelled, unhooked and locked (triangular lock), with 2-part stainless steel ashtray.
Dimensions: (W x H) 535 x 600mm, Total height above finished floor960 mm, bin diameter – 365 mm.(We recommend an aluminium liner, at extra cost)
Type Model Model60 O-A 60 M-Afixed movable
Available in the following variations:Bin colour-coated, hot-dip galvanized tubular frame
Bin and tubular frame colour-coated
Bin and tubular frame fully hot-dip galvanized
Stainless steel bin, colour-coated tubular frame
Bitte bei Bestellungen zusätzlich die gewünschte Standardfarbe tannengrün, rubinrot, graphitschwarz, ultramarinblau, weißaluminium, graualuminium oder reinweiß angeben. Weitere Farben auf Anfrage.
82 Litter bins
When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
ca. 4
00
535
ca. 2
7560
0
85
1220
1485
ø 365
Option 18Steel litter bins, with lid, capacity 60 l.Bin can be swivelled, unhooked and locked (triangular lock).Dimensions (W x H) 535 x 600 mm, bin diameter - 365 mm.
Type Model Model60 O-D 60 M-Dfixed movable
Bin galvanized and colour-coated, hot-dip galvanized tubular frameOrder no. 59238 59348
Galvanized and completely colour-coatedOrder no. 59237 59347
Fully hot-dip galvanized (without colour-coating)Order no. 5923817 5934817
Stainless steel bin, lid and tubular frame hot-dip galvanized or colour-coated Order no. 5923823 5934823
Aluminium linerWith 2 handles, can also be used with litter bin model 60 lDimensions: (H) 590 mm, diameter 345 mm.
Order no. 0501431
Option 19Steel litter bin, capacity 60 l, with lid and ashtrayBin can be swivelled, unhooked and locked (triangular lock), with2-part stainless steel ashtray.Dimensions (W x H) 535 x 600mm, Total height above finishedfloor 1220 mm, bin diameter – 365 mm.(We recommend an aluminium liner, at extra cost)
Type Model Model60 O-A-D 60 M-A-Dfixed movable
Available in the following variations:Bin colour-coated, hot-dip galvanized tubular frame
Bin and tubular frame colour-coated
Bin and tubular frame fully hot-dip galvanized
Stainless steel bin, colour-coated tubular frame
Aluminium linerWith 2 handles, can also be used with litter bin model 60 lDimensions (H) 590 mm, diameter 345 mm
Order no. 0501431
Technische Änderungen vorbehalten.
Litter bins83
Option 20Lugs for fixing VASURA bins to the groundhot-dip galvanized, for 45 mm tube diameterVASURA movable 60 l
Order no. 58540
Option 21Community litter bins 110 lOuter bin made of Duropal polyethylene, in the colours*: green,red or blue. Galvanized sheet steel liner.With sack dispenser, automatic fire extinguishing plate andcement base for stability. It can be bolted to the ground. Dimensions: 500 mm diameter, height 1072 mm, weight 30 kg.
Type without ashtray with ashtrayOrder no. 5119899 5110899
*Other colours on request.
Option 22Topsy litter bins 85 lOuter bin made of double-walled, coloured polyethylene. Available in many standard colours. With galvanized sheet steelliner. Unique design with practical lock. Wide openings on bothsides for easy, hygienic waste disposal. Many optional additionalfeatures.Dimensions: 470 mm diameter, height 990 mm, weight 12 kg.
Type StandardOrder no. 5194700
Please request our complete Glasdon product-line catalogue “Environment in Focus”.In it you will find a broad selection of litter bins and products for municipal cleaning jobs.
We reserve the right to alter specifications without notice.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Option 23SMOKY upright ashtrayTrapezoid steel bin, galvanized and colour-coated in dark grey,stainless-steel slot surround and perforated plate, lockable with 8 mm square spanner, with accessories for bolting to theground.Dimensions:height 1000 mm, width 207 mm, depth 250 mm, weight 13.7 kg
Type compl. stainless-steel grey colour-coatedOrder no. 501602 501083
Option 24SPLASH litter bins 85 lPolyethylene bin, colour blue, door white, can be unhooked without key.Dimensions: height 1180 mm, width 915 mm, weight 23 kg, withinsert made of galvanized sheet steel or polyethylene.Available optionally with or without additional 30 kg concreteweight.
Type with galvanized with polyethylenesheet steel insert insert
Order no. with ZS-G 0501084 with ZS-G 0501085Order no. without ZS-G 05000822 without ZS-G 0501086
More about Glasdon products in the new catalog “Environment in Focus”.
Bitte bei Bestellungen zusätzlich die gewünschte Standardfarbe tannengrün, rubinrot, graphitschwarz, ultramarinblau, weißaluminium, graualuminium oder reinweiß angeben. Weitere Farben auf Anfrage.
84 Litter bins
When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Bitte bei Bestellungen zusätzlich die gewünschte Standardfarbe tannengrün, rubinrot, graphitschwarz, ultramarinblau, weißaluminium, graualuminium oder reinweiß angeben. Weitere Farben auf Anfrage.
85 Renovation and replacement
When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Olympia
Floor or wall mounting components not included.
Note:Each OLYMPIA layout begins at the left-hand end with astraight or curved basic unit. The rest consists of add-on units.
This does not apply to complete circles (see diagram).A circle consists of twelve 30° add-on units.
Option 1Basic unit, 2-seat bench, straightOlympia features: seat with knee roll, backrest with plateau top,galvanized and colour-coated tubular steel feet.Seat and backrestmade of tubular steel and wire mesh, external tube diameter 30mm, wire gauge 3.0 mm, mesh pattern 15 x 15 mm, galvanizedand RILSAN polyamide coated (min. thickness 350 microns).Dimensions (W x D x H) 1225 mm x 830 mm x 755 mm, seatheight 450 mm.
Type A B C Dfixed fixed with movable wall-
base plate mountedOrder no. 51332 51333 51334 51708
Fixed
Technische Änderungen vorbehalten.
Renovation and replacement86
We reserve the right to alter specifications without notice.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Option 2Add-on unit, 2-seat bench, straightOlympia features: seat with knee roll, backrest with plateau top (as option 1).DimensionsW x D x H) 1225 mm x 830 mm x 755 mm, seat height 450 mm.
Type A B C Dfixed fixed movable wall-
with base mountedplate
Order no. 51335 51336 51337 51709
Option 3Basic unit, single seat, curved 30°, facing inwardsOlympia features: seat with knee roll, backrest with plateau top.Tapered Olympia seats with bowed longitudinal wires arrangedradially. Tubular steel feet, galvanized and colour coated. Seatand backrest made of tubular steel and wire mesh, external tubediameter 30 mm, wire gauge 3.0 mm, mesh pattern 15 x 15 mm,galvanized and RILSAN polyamide coated.Dimensions: outer radius 1904 mm, depth 830 mm, height 755mm, seat height 450 mm.
Type A B Cfixed fixed movable
with baseplate
Order no. 51350 51351 51352
Option 4Add-on unit, single seat, curved 30°, facing inwardsOlympia features: seat with knee roll, backrest with plateau top (as option 3). Tapered Olympia seats with bowed longitudinalwires arranged radially.Dimensions: outer radius 1904 mm, depth 830 mm, height 755mm, seat height 450 mm.
Type A B Cfixed fixed movable
with baseplate
Order no. 51353 51354 51355
Option 5Basic unit, single seat, curved 30°, facing outwardsOlympia features: seat with knee roll, backrest with plateau top (as option 3). Tapered Olympia seats with bowed longitudinalwires arranged radially.Dimensions: outer radius 2030 mm, depth 830 mm, height 755mm, seat height 450 mm
Type A B Cfixed fixed movable
with baseplate
Order no. 51356 51357 51358
Bitte bei Bestellungen zusätzlich die gewünschte Standardfarbe tannengrün, rubinrot, graphitschwarz, ultramarinblau, weißaluminium, graualuminium oder reinweiß angeben. Weitere Farben auf Anfrage.
87 Renovation and replacement
When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Option 6Seat S with straight subframe and supportOlympia features: Seat with knee roll, backrest with plateau topas armrest. Subframe and tubular steel feet galvanized andcolour coated. Tubular steel and wire mesh seat and backrest,external tube diameter 30 mm, wire gauge 3.0 mm, mesh pattern15 x 15, galvanized and RILSAN polyamide coated (min. thickness350 microns), a supporting foot is required after 3 seats.
Dimensions: width 585 mm, depth 830 mm, seating height 450 mm
Order no. 5253400
Type A B C Dfixed fixed movable wall-
with base mountedplate
Option 7Seat S with subframe and support curved to specific radiusOlympia features: Seat with knee roll, backrest with plateau topas armrest. Frame radius not under 3000 mm.
When ordering, please include a layout plan with radius andsector dimensions, as well as the desired seat direction (facinginward/outward).
Dimensions: width 575 mm, depth 830 mm, seating height 450 mm
Order no. 5832200
Type A B Cfixed fixed movable
with baseplate
Example:Seat S3-seater
Bitte bei Bestellungen zusätzlich die gewünschte Standardfarbe tannengrün, rubinrot, graphitschwarz, ultramarinblau, weißaluminium, graualuminium oder reinweiß angeben. Weitere Farben auf Anfrage.
88 Renovation and replacement
908
328
809
582
450
810
200
Replica
Option 1REPLICA seat unit, 2-seater, straightOne-piece seat and back, 30 mm diameter tubular steel frame, wire mesh seat and back surfaces, 3.0 mm wire gauge, 15 x 15mm mesh pattern, galvanized and RILSAN polyamide coated (min. thickness 350 microns). Suitable for all Olympia subframeswith 100 x 40 mm cross supports.Dimensions(W x D x H) 1200 mm x 597 mm x 810 mm, seat height 450 mm
Type without armrest armrest armrestarmrest right left both sides
Order no. 52044 52056 52045 52057
Price does not include subframes and supports
REPLICA seat components have been designed to be mounted onthe existing subframes in place of damaged OLYMPIA benches.Because of their extremely stable construction, they are recom-mended for use in locations where Olympia components havebeen subject to vandalism. Substantial expenditure can be savedwhere the foundations and subframes have not been affected.
The OLYMPIA benches of the first generation had the disadvan-tage that leaves and rubbish could collect between the seat and back parts. The use of REPLICA makes that a thing of the past.
Of course, you can still replace or renovate damaged OLYMPIAwith OLYMPIA. Renovation involves the old coating being re-moved in our works, the unit is then sandblasted, regalvanizedand recoated - in a new colour if requested. A new 10 year anti-rust guarantee is also given. Please contact us or our works repre-sentatives.
Option 2REPLICA seat unit, 1-seater, curved facing inwards, 30°One-piece seat and back, 30 mm diameter tubular steel frame, wire mesh seat and back surfaces, 3.0 mm wire gauge, 15 x 15mm mesh pattern, galvanized and RILSAN polyamide coated (min. thickness 350 microns). Suitable for all Olympia subframeswith 100 x 40 mm cross supports.Dimensions(W x D x H) 908 mm x 582 mm x 810 mm, seat height 450 mm
Type without armrest armrest armrestarmrest right left both sides
Order no. 52062 52064 52063 52065
Price does not include subframes and supports
597
450
810
200
1200
328
1225100
When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
661
328
809
582
450
810
200
Technische Änderungen vorbehalten.
Renovation and replacement89
We reserve the right to alter specifications without notice.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
Option 3REPLICA seat unit, 1-seater, curved facing outwards, 30°One-piece seat and back, 30 mm diameter tubular steel frame, wire mesh seat and back surfaces, 3.0 mm wire gauge, 15 x 15 mmmesh pattern, galvanized and RILSAN polyamide coated (min.thickness 350 microns). Suitable for all Olympia subframes with100 x 40 mm cross supports.
Dimensions:(W x D x H) 908 mm x 582 mm x 810 mm, seat height 450 mm
Type without armrest armrest armrestarmrest right left both sides
Order no. 52058 52060 52059 52061
Price does not include subframes and supports
Warming column
When ordering, please specify the standard colour required, pine green, ruby red, ultramarine blue, pure white, white aluminium, gray aluminium and graphite black.ERLAU AG · Erlau 16 · 73431 Aalen/Germany · Phone +49 73 61 - 595-0 · Fax +49 73 61 - 595-3017 · [email protected] · www.erlau.com
BRASERO warming columnStainless-steel column for heating an area, with a vertical row ofthree infrared lamps.
Technical details:Height 214 cm, diameter 32 cm, weight 70 kg.
Output: 6,000 watts (3 x 2,000 watts)Power: electricMaterial: stainless-steelVoltage: 230 / 400 V, three-phase + neutralGuarantee: 1 year
Brasero Base for Spare lampswarming column easier mounting (2,000 W)
90