outdoor urbanelements catalogue 2015 · 2016. 8. 16. · atlántida enric batlle, joan roig 1991...
TRANSCRIPT
AtlántidaEnric Batlle, Joan Roig1991
www.santacole.com
Pleasantly-shaped and timeless monolith which breaks with the classic design of an ornamental drinking fountain.
With rectangular cast iron geometry and a brass spout, it can be installed individually, in sets or in rows.
Parque del Nus de la Trinitat, Barcelona (Spain)
Monolito de formas amables y atemporales que rompe con la clásica concepción de fuente ornamental.
De geometría rectangular realizada en fundición de hierro y caño de latón puede instalarse de forma aislada, en conjunto o alineación.
www.santacole.com
www.santacole.com
9115
3012
011
010
Materials and finishes
Anti-rust cast iron monolith painted black.The cast iron nodular grid, painted black,
is supported on a hot-dip galvanised steel frame. One-inch cast brass spout. Optional anti-freeze valve.
Installation
The fountain is embedded 10 cm into the ground using four corrugated rods. Includes a pressure regulator and timer flow control to optimise and save water. The grid rests on the metal frame which is levelled with the ground and is the same size as the water collection manhole.
Maintenance
No maintenance required except standard cleaning of the button and interior.
Delivered in two parts: the monolith and spout, and the required amount of grids and frames.
Assembly instructions and anchor bolts are included with the monolith.
If temperatures may drop below 0°C, turn off the water supply and drain the circuit to prevent freezing and breakage.
Weight
122 kg.
Materiales y acabados
Monolito de fundición de hierro con protección antioxidante y pintado color negro.
Reja de fundición de hierro nodular pintada color negro apoyada sobre un marco de acero galvanizado en caliente. Caño de fundición de latón de una pulgada.
Posibilidad de incluir valvula antihielo.
Instalación
La fuente se empotra 10 cm en el suelo y se fija mediante cuatro pernos corrugados.
Dispone de regulador de presión y control temporizado de flujo para optimizar y economizar al máximo el consumo de agua. La rejilla descansa sobre el marco metálico enrasado con el pavimento y tiene la misma dimensión que la arqueta de recogida de agua.
Mantenimiento
No necesita mantenimiento, salvo el habitual para la limpieza interior y del pulsador.
Se suministra en dos partes: por un lado el monolito con el caño, y por el otro tantas rejillas y marcos como se requieran.
Con el monolito se entregan los pernos de anclaje y las instrucciones de montaje.
Cuando se prevean temperaturas por debajo de 0° C se aconseja cerrar el paso de agua y vaciar el circuito para evitar congelaciones y roturas.
Peso
122 kg.
Sizes in cmCotas en cm
StructureEstructura
Cast iron / Hierro fundido
Painted / PintadoRAL 7024
Brass / Latón
Polished / Pulido
www.santacole.com