oval front grip grabber
TRANSCRIPT
© Plymovent AB reserves the right to make design changes.
MODEL INFO
SHIPPING DATA
370x250x420mm
Product name Article number
OFGG-100/200 90300-1011
OFGG-125/200 90305-1011
APPROVAL CERTIFICATIONS
PROPERTIES
Material:- Housing
Galvanized steel, Rubber
Weight : 2,4 kg
Ø100/125
To be used for oval tailpipes with a protrusion from the chassis of +/- 42mm and with outside dimensions of +/- 155
the special Grabber® clip to connect.
Oval front grip Grabber ®
The Plymovent Oval front grip Grabber® is designed to connect tooval tailpipes with a minimal protrusion from the chassis. Due to several unique product features, as changedspecial clip the Grabber® functions as any other Gabber®.
For a proper connection it is important to connect the grabber in the following sequence:1. Place the upper edge of the Grabber® on the upper end of the tailpipe.
2. Move the lower part of the Grabber® around the tailpipe. The clip will connect
Grabber® which locks the clip �rmly behind the tailpipe �ange.
4. The Grabber® disconnect is automatic, in line with a normalGrabber® nozzle.
APPLICATIONS
Temperature resistance: 150°C/300°F continuous 200°C/390°F intermittent
AMBIENT CONDITIONS
TIN_MDB_090511_EN
USE