ALPHABET 21 JIB CRANE WITH

100mm CST-100 STAND

(P-A21-JS)

All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, except as may be expressly permitted by

the applicable copyright statutes or in writing by the Publisher.

INSTRUCTION MANUAL

For Demonstration only

Proaim Alphabet 21 Jib Crane With 100mm CST-100 Stand 2

I N T R O D U C T I O N From sweeping panoramas to intimate close ups in a single move, video crane shots have always added dramatic energy to enhance the field of view. Found at sporting events, music videos, TV series, Feature Films and studio productions, video crane shots turn ordinary into extraordinary.

IN THE BOX Please inspect the contents of your shipped package to ensure you have received all that is pictured and listed below. The padded shipping /storage containers has been especially designed to protect your purchase while in transit and is a good place to keep your Proaim Alphabet 21 Jib Crane With 100mm CST-100 Stand . when not in use. This package will be dispatched in 2 boxes.

P a c k a g i n g M a t e r i a l o f B o x - 1

5 x Jib Sections Weight Bar with closers Cable Guide Clamp Tightening Knobs Handel 3 x Cab les Rod Support

1

2

Jib Section-1

Jib Section-2

Support Rod

Cable Guide Clamp Weight Bar

14.3ft Cable (Red) 14.5ft Cables (Blue)

Jib Section-2b

Jib Section-3

Weight Washers

Handle

Jib Section-2a

8mm Female knob 8mm Male

knobs

Cable Guide

8mm Male female knob set

4ft Cables (Blue) 4ft Cable (Red)

Jib Section-2c

Lanc Zoom Controller

Proaim Alphabet 21 Jib Crane With 100mm CST-100 Stand 3

A S S E M B L I N G T R I P O D S TA N D W I T H S P R E A D E R

Take out the Spreader from the Accessory Bag. Spread the spreader on floor and open the legs of spreader with the help of provided knob and attach the stand with spreader.

P a c k a g i n g M a t e r i a l o f B o x - 2

Tripod stand Spreader

NOTE:-You will received CST-100 in “Black Color” But this CST-100 Silver Stand for demonstration purpose only.

A S S E M B L I N G J I B S E C T I O N S Install the Hub (Section 2 of Jib) into bowl of 100 mm tripod stand and tighten the hub with

center locking knob.

Proaim Alphabet 21 Jib Crane With 100mm CST-100 Stand 4

C O N N EC T I N G J I B A R M S EC T I O N S

1. Section 2 with 3 : Loosen the provided knob at the end of section 2 to slide the bars of section 3 into the end of section 2 .

2. Section 2a with 2, 2b with 2a, 2c with 2b & 1 with 2c : For attaching these sections follow the same steps as mentioned above.

A S S E M B L I N G C A B L E G U I D E A N D S U P P O R T R O D

Attach cable guide to cable guide clamp on 2nd section properly. Loosen the knob, ahead of cable guide clamp in order to attach cable guide support rod to it.

Knobs

Then tighten both the sections together using the provided knobs.

Proaim Alphabet 21 Jib Crane With 100mm CST-100 Stand 5

Retighten the knob to secure properly.

Now attach one end of 14.3ft red cable to red hook on back side of jib (section 3 ) and align the red cable to the cable guide from top.

Similarly attach the second blue cable and align both the blue cables to the side of support rod.

Now attach one end of 14.5ft blue cable to blue hook on back side of jib (section 3 ) and the other end of blue cable to blue hook on front section of jib (section 1).

A S S E M B L I N G C A B L E S

Proaim Alphabet 21 Jib Crane With 100mm CST-100 Stand 6

The jib arm can be locked (tilting) with the help of this knob.

The wires have the screw-in wire adjustment system in order to adjust the wire tension to level the jib .

A D J U S T I N G T H E W I R E T E N S I O N E R

Then, attach the other end of red cable to red hook on front section of jib (section 1).

Proaim Alphabet 21 Jib Crane With 100mm CST-100 Stand 7

Insert the weight rod & weights (not supplied) to both ends and secure with the help of closers.

The camera plate can be tilted upwards & downwards with the help of provided handle.

The central fork has free hole to attach LCD mount bracket (not included) .

Proaim Alphabet 21 Jib Crane With 100mm CST-100 Stand 8

Camera can be mounted directly on the head platform with the help of provided chuknut.

YO U R P R O A I M A L P H A B E T 2 1 J I B A L L D R E S S E D U P A N D

R E A DY TO G O

M O U N T I N G C A M E R A O N H E A D P L A T F O R M

Proaim Alphabet 21 Jib Crane With 100mm CST-100 Stand 9

WARRANTY

We offer a limited time warranty for our products. For Mechanical products we provide a 6 month warranty & for electronic products we provide a 3 month warranty from the date of pur-chase.

We will repair or replace your product, free of charge, in the event of a defect in materials or craftsmanship obtained during normal use or handling based on the user manual. Please note that we will not cover any shipping costs for returning the product to us. If any VAT or import du-ties are applied to the return, we will also charge these costs to the customer.

The warranty does not include, by the way of example, damage caused by products that we do-

not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product ,

or service by anyone other than our company.

We are not liable for incidental or consequential damages resulting from the use of the unit or occurring due to any breach of this warranty.

Replacement parts of the product will be provided at nominal cost (covering the cost price of the replacement parts only) to the customers after the Warranty Period has expired. We will cover the complete cost of sending replacement parts within the warranty period. After that, Nominal cost of the product & Actual shipping cost will be charged.

Do not send the unit to us without first getting a response and getting the approval to send back the item.

In case of any kind of dissatisfaction, we urge you to Contact us immediately and we shall do our best to help you out. For any other assistance you can reach us via email.