AUSTRAL IA’S PREMIUM SELF STORAGE DOOR

Call 13 62 63 or visit www.bnd.com.au for further information.

*For full warranty conditions see back page.

INDUSTRIAL SECTIONAL OVERHEAD DOORP7™ IndustrialAUSTRALIA’S pREmIUm

INDUSTRIAL SECTIONAL OVERHEAD DOOR

I N D U S T R I A L C O L L E C T I O N

The B&D p7™ Industrial door is an innovative, sectional overhead panel door that can be purposely designed to suit its application. The lightweight aluminium frame of the p7 Industrial holds different styles of panel inserts from a range of long lasting, durable materials including: acrylic, fibreglass and aluminium. p7 Industrial can be installed with an aluminium finish or with a choice of over 100 powder coat colours – enough to complement any commercial building’s décor.

The p7 Industrial door’s hinged horizontal panels lift up and lay parallel with the ceiling when open, and do not protrude outside the opening at any time during operation. The door provides full walk-in clearance when in the open position, providing the correct headroom is available.

SECURITY OPTIONS

SECURITY OPTIONS

SECURITY OPTIONS

INTERCHANGEABLE pANELS

LIGHTWEIGHT ALUmINIUm FRAmE

STYLISH AND mODERN

mINImAL mAINTENANCE

ALUMPANEL™ INSERT (P7A) Panels manufactured from aluminium stucco with a textured appearance, providing a strong but lightweight finish. Available in natural aluminium or powder coated in a choice of over 100 colours.

• High corrosive resistance

• Rigidity throughout the door

• Strong but lightweight

• protection against dirt, leaves and weather

FIBREPANEL™ INSERT (P7F)panels manufactured from fibreglass sheeting which allows light penetration and is suitable in areas where corrosion may affect the life of the door. panels available in white or cream fibreglass to allow maximum light access through the panels.

• provides light penetration

• prolongs the life and operation of the door

• protection against dirt, leaves and weather

• High corrosive resistance

ACRYLICPANEL™ INSERT (P7C)Designed for applications where clear, unobstructed vision is required such as fire and ambulance stations, showrooms, greenhouses and swimming pool areas. Alternatively, if you require more privacy, Smoked Acrylic and Opaque Acrylic are available.

• Sturdy secure door

• Security with clear vision when clear inserts are chosen

• protection against dirt, leaves and weather

ALUMPANEL™ WITH AIR INSERT (P7P) Features the subtle look of horizontal raised sheeting, perforated with small round holes. Allows ventilation and filtered light in and out of the building and also has the effect of being able to see out, without seeing in. The inserts allow 25% ventilation over the insert, and around 17% ventilation over the complete door, making it suitable for use in applications such as underground carparks. Available in natural anodised finish or powder coated in a choice of over 100 colours.

• Exhaust emission control

• provides privacy with internal illumination

• High corrosive resistance

SECURITY OPTIONS

SECURITY OPTIONS

SECURITY OPTIONS

AIRPANEL™ INSERT (P7X)The perfect insert option for underground parking stations or security control in unit complexes. The Airpanel features a strong, attractive grille design, available in natural anodised finish or powder coated in a choice of over 100 colours.

• Sturdy, secure, ventilated with clear vision through the door

• High corrosive resistance

• Amplimesh 68A grille with 80% airflow

ALUMINIUM PLATE INSERT (P7A) Strong long lasting aluminium panel insert in checker plate pattern that complements the style or design you are trying to create. Can be supplied in natural aluminium finish or powder coated in a choice of over 100 colours to suit your colour scheme.

• Contemporary look

• Robust appearance

• provides strength and security

VERTIPANEL™ INSERT (P7V) Suitable for heavy duty applications, because of its strength and solid construction. Available in natural anodised finish or powder coated in a choice of over 100 colours.

• Attractive scalloped finish

• Robust appearance

• provides strength and security

• protection against dirt, leaves and weather

• High corrosive resistance

Visit www.bnd.com.au for further information.

OMNIPANEL™ (P7O)Omnipanel™ allows for added flexibility, as you can choose to include a full panel of Acrylicpanel, Airpanel or Alumpanel With Air to your p7 door. Simply choose from the range of p7 door options above, then request the Omnipanel addition you are after. This great versatility means the p7 door can be used in an extensive range of applications.

INDUSTRIAL SECTIONAL OVERHEAD DOORP7™ Industrial

B&D Doors has offices servicing all states. For more details on this product or our other ranges,

call 13 62 63 or visit www.bnd.com.au

International Customers call +61 2 9722 5555fax +61 2 9771 6385 or email bndint@bnd.com.au

YOUR B&D REPRESENTATIVE IS:

B&D Doors & Openers is a division of B&D Australia Pty Ltd, an Alesco Company ABN 25 010 473 971 © 2011 B&D Australia

B&D have a range of accessories to increase the functionality of your B&D door or opener. Call us on 13 62 63 or visit www.bnd.com.au for the complete range of B&D products and accessories.

11/11

INDUSTRIAL SECTIONAL OVERHEAD DOORP7™ Industrial

AESTHETICS• Frame manufactured from industrial strength anodised aluminium

and available in an extensive powder coating colour selection, to complement your colour scheme.

• Range of insert options means you design the door that suits your application.

• Custom panel sizes, and evenly spaced insert openings ensuring the door suits the desired application.

• Door manufactured to fit your application requirements from height ranges of 1370mm to 4500mm and width 1800mm to 7620mm.

WEATHER PROTECTION• Bottom weatherseal – soft and pliable – helps to stop leaves and

rain coming in under the door.

• Galvanised hinges and hangers provide resistance to corrosion and long lasting durability in the toughest of weather conditions.

• Inserts fitted using snap-on extrusions and glazing seals.

EASE OF OPERATION• Frame is manufactured from a specifically designed extruded

aluminium profile ensuring it is lightweight and requires minimal maintenance.

• Inserts fitted using snap-on extrusions and glazing seals.

STRENGTH AND DURABILITY• Springs are designed to exceed the Australian Standard for garage

doors – 20,000 cycles; giving the door greater durability and a longer life.

• purpose designed extrusion for reinforcing of wide doors (3800mm+) providing a sturdier door.

SMOOTH, qUIET OPERATION• Nylon running wheels with ball bearings ensure that operational

noise is kept to a minimum.

FINISH• Door available in natural anodised aluminium finish or available in

an extensive powder coating colour selection.

METHOD OF OPERATION• We recommend you automate your p7 Industrial Door. Ask us for

the best option for added operational convenience.

DIMENSIONSINSTALLATION CLEARANCES – Standard Headroom

HEAdROOm (mm) SIdEROOmRECOmmENdEd WITH OpENER* EACH SIdE

FROm (inc.) HEIgHT

FROm (inc.) HEIgHT

Up TO 4710W

4710 – 5285

OvER 5285W

Up TO 4710W

4710 – 5285

OvER 5285

1370 2440 340 340 390 390 390 390 1202445 3050 340 340 390 390 390 440 1203055 3660 340 390 390 390 440 440 1203665 4500 390 390 390 440 440 440 120

INSTALLATION CLEARANCES – Low HeadroomHEAdROOm (mm) SIdEROOm

RECOmmENdEd WITH OpENER* EACH SIdEFROm (inc.)

HEIgHTFROm (inc.)

HEIgHTUp TO 4710W

4710 – 5285

OvER 5285W

Up TO 4710W

4710 – 5285

OvER 5285

Up TO 15m2

OvER 15m2

1370 2440 190 190 190 240 240 240 155 1952445 3050 190 190 200 240 240 250 155 1953055 3660 190 200 200 240 250 250 155 1953665 4500 200 200 200 250 250 250 155 195

* METHOD OF OPERATION: An allowance of 50mm has been allowed for a domestic overhead opener. Should an industrial overhead opener be required then an additional 60mm will be required. We recommend you contact B&D or one of our distributors before proceeding further.

Note: Sideroom dimensions include door overlap of opening of 30mm on each side.

WARRANTY• 12 month warranty for complete door and parts in domestic and

industrial/commercial applications, surface (excludes salt corrosion).*

* NOTE: Warranty will be voided if inserts are not installed or changed by recognised B&D Door installer.

a) For areas within one kilometre of a corrosive environment e.g. salt air or industrial fallout, special care and maintenance are generally required for metal products. Consult B&D or your B&D Accredited Dealer for advice.

b) B&D p7 Industrial doors, in normal use, are covered by a 1 year warranty for complete door and parts, conditional on proper care, as recommended in the door’s handbook. Full details of the warranty are available, on request, from your nearest B&D office.

c) Warranty will be voided if inserts are not installed, or changed, by recognised B&D installer.

d) The company reserves the right to make changes or improvements to the products or accessories without notice and without incurring any obligation to make similar changes or improvements to goods previously ordered. Specifications subject to change without notice.

e) B&D “prefixed Trademarks” are trademarks of B&D Australia pty Ltd. Abuse of these trademarks will result in legal action.

f ) B&D products have many patents and registered designs applicable.

g) Details correct at date of publication.

For more details on this product or our other ranges visit www.bnd.com.au