pac international, llc acoustical performance test …

TEST REPORT

PAGES

ATI 00629 (03/21/18)

12

DOCUMENT CONTROL

REPORT NUMBERJ1110.04-113-11-R0

ACOUSTICAL

SCOPE OF WORK

ASTM E90 AND ASTM E492 TESTING ON SHAW CARPET AND PAD

PERFORMANCE

SPECIMEN TYPE

Trade Ready Steel Joist Assembly - RSIC-SI-1 Ultra Spring Isolator® - One Layer PABCO®

SOUND CURB™

TEST DATE12/04/18

ISSUE DATE02/12/19

RECORD RETENTION END 12/04/22

RTTDS-R-AMER-Test-2844© 2017 INTERTEK

INTERNATIONAL, LLCPAC

This report does not constitute certification of this product nor an opinion or endorsement by

this laboratory.

COMPLETED BY:

TITLE:

SIGNATURE:

Cody R. SnyderTechnician I - Acoustical

Testing

DATE:

This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek

and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek

assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or

damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this

report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of

the tested material, product or service must first be approved in writing by Intertek. The observations and test

results in this report are relevant only to the sample(s) tested. This report by itself does not imply that the material,

product, or service is or has ever been under an Intertek certification program.

02/12/19

COMPLETED BY:

TITLE:

SIGNATURE:DATE:

Jordan StrybosEngineer, Team Lead -

Acoustical Testing

J1110.04

6186

SERIES/MODEL: Shaw Carpet and Pad

Intertek Building & Construction (B&C) was contracted by PAC International, LLC to perform

testing in accordance with ASTM E90 AND ASTM E492 on Shaw Carpet and Pad . Results

obtained are tested values and were secured by using the designated test method(s). Testing

was conducted in the VT test chambers at Intertek B&C located in York, Pennsylvania.

SECTION 2SUMMARY OF TEST RESULTS

DATA FILE NO.

02/12/19

STCIIC

SECTION 1SCOPE

REPORT ISSUED TOPAC INTERNATIONAL, LLC6585 Whispering Sands DriveLas Vegas, Nevada 89131

Telephone: 717-764-4129

York, PA 17406

TEST REPORT FOR PAC INTERNATIONAL, LLCReport No.: J1110.04-113-11-R0

717-764-7700

www.intertek.com/building

Date: 02/12/19

130 Derry Court

Facsimile:

Version: 09/19/17This page alone is not a complete report.

of 12 RTTDS-R-AMER-Test-2844

http://www.intertek.com/building#

Telephone: 717-764-4129

York, PA 17406


717-764-7700


Date: 02/12/19

130 Derry Court

Facsimile:

ASTM E989-06 (2012), Classification for Determination of Impact Insulation Class (IIC)

ASTM E2235-04 (2012), Standard Test Method for Determination of Decay Rates forUse in Sound Insulation Test Methods

ASTM E413-16, Classification for Rating Sound Insulation

ASTM E90-09 (2016), Standard Test Method for Laboratory Measurement ofAirborne Sound Transmission Loss of Building Partitions

SECTION 4

ASTM E492-09(2016)e1, Standard Test Method for Laboratory Measurement of

The specimen was evaluated in accordance with the following:

B&C will service this report for the entire test record retention period. Test records, such as

detailed drawings, datasheets, representative samples of test specimens, or other pertinent

project documentation, will be retained by B&C for the entire test record retention period.

TEST METHODS

The total weight of the floor/ceiling assembly was 1048.4 kg / 2310.9 lbs. B&C will store

samples of the test specimen for four years. Photographs of the test specimen are included in

the report. The client did not supply drawings of the test specimen.

MATERIAL SOURCE/INSTALLATION

Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine

SECTION 3

The full test specimen was assembled on the day of testing by B&C. All materials provided by

the client were installed on an existing B&C assembly (Trade Ready Steel Joist Assembly - RSIC-

SI-1 Ultra Spring Isolator® - One Layer PABCO® SOUND CURB™) utilizing B&C-supplied

materials. The assembly was installed in a steel test frame which was installed into the

opening between the source and receive rooms in the test chamber. The test frame was

isolated from the structure with dense neoprene gasket.




Telephone: 717-764-4129

York, PA 17406


717-764-7700


Date: 02/12/19

130 Derry Court

Facsimile:

*

*

*

Tapping Machine Norsonic Nor277 Tapping Machine INT00936 12/17

Source Room Environmental

IndicatorComet T7510

Temperature and Humidity

Transmitter63812 10/18

Source Room Microphone PCB Electronics 378C20 Microphone and Preamplifier 63741 04/18

Source Room Microphone PCB Piezotronics 378C20 Microphone and Preamplifier 63742 03/18



Source Room Microphone PCB Piezotronics 378C20 Microphone and Preamplifier INT01009 02/18

Receive Room Environmental

IndicatorComet T7510

Temperature and Humidity

Transmitter

63810 10/18

63811 10/18

Receive Room Microphone PCB Piezotronics 378B20 Microphone and Preamplifier 63747 07/18




Receive Room Microphone PCB Piezotronics 378C20 Microphone and Preamplifier 65617 06/18

Microphone Calibrator Norsonic Nor1251 Acoustical Calibrator 65105 06/18

Data Acquisition Unit National Instruments PXI-4462 Data Acquisition Card 63763-1 06/18

Data Acquisition Unit National Instruments PXI-4462 Data Acquisition Card 65124 05/18

ASSET # CAL DATE

Data Acquisition Unit National Instruments PXI-4462 Data Acquisition Card INT00977 08/18

157.31 m³ (5555.47 ft³)

190 m³ (6709.79 ft³)

COMPANYIntertek B&C

NAMECody R. Snyder

LIST OF OFFICIAL OBSERVERSSECTION 6

SECTION 5EQUIPMENT

VT RECEIVE ROOM VOLUME

VT SOURCE ROOM VOLUME

* The calibration frequency for this equipment is every two years per the manufacturer's recommendation.

INSTRUMENT MANUFACTURER MODEL DESCRIPTION

Intertek B&CJordan Strybos




Telephone: 717-764-4129

York, PA 17406


717-764-7700


Date: 02/12/19

130 Derry Court

Facsimile:

SECTION 7

Detailed test procedures, data for flanking limit tests, repeatability measurements, and

reference specimen tests are available upon request.

TEST PROCEDURE

SECTION 8TEST CALCULATIONS

The STC (Sound Transmission Class) and IIC (Impact Insulation Class) ratings were calculated in

accordance with ASTM E413 and ASTM E989, respectively.

The microphones were calibrated before conducting the tests. The air temperature and

relative humidity conditions were monitored and recorded during all measurements. The

average temperature and humidity of both the source and received rooms are listed in

Sections 10 and 11. The maximum and minimum temperatures and humidities of the receive

room from the duration of the test are listed in Sections 12 and 13.

The airborne transmission loss test was conducted in accordance with the ASTM E90 test

method using the single direction method. Two background noise sound pressure level and

five sound absorption measurements were conducted at each of five microphone positions.

Two sound pressure level measurements were made simultaneously in both rooms, at each of

five microphone positions.

The impact sound transmission test was conducted in accordance with the ASTM E492 test

method. Two background noise sound pressure level, two sound pressure level measurements

with the tapping machine operating at each position specified by ASTM E492, and five sound

absorption measurements were conducted at each of five microphone positions.




Telephone: 717-764-4129

York, PA 17406


717-764-7700


Date: 02/12/19

130 Derry Court

Facsimile:

MATERIAL

Carpet

Dimensions

(mm/inch)

Thickness

(mm/inch)

MANUFACTURER AND

SERIESQUANTITY

AVERAGE

WEIGHT1.37 kg/m²

0.28 lb/ft²

10.98 m²

118.19 ft²

19 / 0.75

57.2 by 57.2

2.3 by 2.3

Steel Floor Deck

Steel Joist

Shaw ECO Beauty12.6 / 0.53023 by 3632

119 by 143

Carpet Pad

3023 by 3632

119 by 143

Note: Loose laid

Spring Isolator®

10.3 / 0.4 Shaw Support PLS7/1610.98 m²

118.19 ft²

Note: Loose laid

1.12 kg/m²

0.23 lb/ft²

0.58 kg/m²

0.12 lb/ft²Sound Control

Mat

1219 by 3023

48 by 119

Hacker Industries, Inc.

FIRM-FILL® SCM-750

10.98 m²

118.19 ft²

Note: Loose laid with seams overlapping and taped

62.5 kg/m²

12.8 lb/ft²

Note: Poured directly on the subfloor underlayment, cured a minimum of 14 days. The gypsum

panel had a closed cell foam perimeter isolation. The product name was specified by the

manufacturer. No noticeable shrinkage or cracking was visible on the specimen.

3023 by 914.4

119 by 3614.6 / 0.57 22-Gauge Corrugated

Gypsum Concrete

3632 by 3023

143 by 11938.1 / 1.5

Hacker Industries, Inc.

FIRM-FILL® CMD

10.98 m²

118.19 ft²

7 joists14.4 kg/joist

31.8 lb/joist

3023 by 3632

119 by 143234.9 / 9.25 ClarkDietrich TradeReady®

Note: Installed in a test frame flush to the source room. Flutes filled with FIRM-FILL® CMD. The

depth of the deck flutes was 14.3 mm (9/16") and the measured thickness of the metal was 0.7

mm (0.03").

Note: Installed in the cavity between joists flush with the decking

Johns Manville Unfaced R-

13

520.7 by 3023

20.5 by 11988.9 / 3.5

10.98 m²

118.19 ft²

1.32 kg/m²

0.27 lb/ft²

6.7 kg/m²

1.37 lb/ft²

TEST SPECIMEN DESCRIPTION

10.98 m²

118.19 ft²

SECTION 9

203.2 / 8PAC International RSIC-SI-1

Ultra35 clips

0.06 kg/clip

0.13 lb/clip

Fiberglass

Insulation

22.3 / 0.88 ClarkDietrich 087F125-1829.1 lin m

95.47 lin ft

0.48 kg/m

0.32 lb/ft

Note: Installed on 610 mm (24") centers utilizing 16 gauge rim track. The measured thickness of

the joist was 1.5 mm (0.06").

Note: Fastened to joists in a 488 mm by 1220 mm (19.2" by 48") pattern.

Note: Installed on 488 mm (19.2") centers perpendicular to the trusses. The measured thickness

of the metal was 0.7 mm (0.03").

Gypsum Panel

1219 by 2438

48 by 9619.1 / 0.75 PABCO® SOUND CURB™

10.98 m²

118.19 ft²

11.23 kg/m²

2.3 lb/ft²

Note: Fastened to the channels on 305 mm (12") centers with 25.4 mm (1") Type S bugle head

screws. The perimeter and seams of the gypsum panels were sealed with Pecora AC-20 FTR caulk

and covered with pressure sensitive tape.

Furring/Hat

Channel

3658 by 76.2

144 by 3




Telephone: 717-764-4129

York, PA 17406


717-764-7700


Date: 02/12/19

130 Derry Court

Facsimile:

60%

51

50

48

3

1

51

ABSORPTION

8.1

7.8

7.8

TECHNICIAN

18.9°C (66°F)

7.8

66

65

SECTION 10TEST RESULTS - AIRBORNE SOUND TRANSMISSION LOSS

12/4/2018

12.58 mm (0.5") Shaw ECO Beauty Carpet, 10.27 mm (0.4") Shaw Support PLS7/16 Carpet Pad, 38.1 mm (1.5") Hacker

Industries, Inc. FIRM-FILL® CMD Gypsum Concrete, 19 mm (0.75") Hacker Industries, Inc. FIRM-FILL® SCM-750 Sound Control

Mat, 14.57 mm (0.57") 22-Gauge Corrugated Steel Floor Deck, 88.9 mm (3.5") Johns Manville Unfaced R-13 Fiberglass

Insulation, 234.95 mm (9.25") ClarkDietrich TradeReady® Steel Joist, 203.2 mm (8") PAC International RSIC-SI-1 Ultra Spring

Isolator®, 22.3 mm (0.88") ClarkDietrich 087F125-18 Furring/Hat Channel, 19.05 mm (0.75") PABCO® SOUND CURB™ Gypsum

Panel

SPECIMEN AREA 17.4°C (63.4°F)

J1110.04

PAC International, LLC

8.9

1) Receive Room levels less than 5 dB above the Background levels are highlighted in yellow.

2) Specimen TL levels listed in red are potentially limited by the laboratory flanking limit.

3) Specimen TL levels listed in blue indicate the lower limit of the transmission loss.

4) Specimen TL levels listed in green indicate that there has been a filler wall correction applied

25

FREQ

Sum of Deficiencies(Sound Transmission Class)

NUMBER

Source Temp.

Source Humidity

SPL

-

-

-

58

3

3

4

43 1.2

OF

DEFICIENCIES

4

36

38

41

60

6832.1

26.7

3.8

5

(Hz)

CRS

SPL

10.98 m²

SOURCE

m²(dB)

TEST DATE

58

DATA FILE NO.

CLIENT

SPECIMENRECEIVE

60%Receive Humidity

TL

(dB)

DESCRIPTION

SPL

(dB)

Receive Temp.

-

(dB)

107

41

41

100

LIMIT

67

67

95%

CONFIDENCE

80

BACKGROUND

-

-

45

43

0

63

0

0

0

0

0

65

64

0

56

57

67

24.5 -

14.7

18.5

81

81 -

0.8

60 2

47

71

0

66

41

61

47

100

110

106

105

104

103

103

250

23.2

22.8

22.4

101

4000

5000

5.8

2500

3150

5.0

102

103

25.0

100

125

160

103200

315

400

1000

1250

1600

630

800

8000

500

2000

6300

12.5

8.0

34.6

29.2

17.5

34.2

29.2

29.1

STC Rating 61

50

63

34.9 30.4

23.9

21.6

23.2

5.2

73

Notes:

76

78

1.0

0.96.3

18.7

13.8

12.3 37

357.8

103

102

7.8

38

12.0

10.5

31

29

101

1.2

0.5

1.9

2.2

1.7

0.5

0.7

0.6

0.8

0.9

0.9

0.7

0.6

0.6

0.5

0.8

10000 24.5

5.6

6.1 11

6

16

12.5

0.6

3.6

2.6

25

101

99

102

9.8

10.8

8.9

11.1

10.9

10.0

102

102

95

95

90

38




Telephone: 717-764-4129

York, PA 17406


717-764-7700


Date: 02/12/19

130 Derry Court

Facsimile:






Panel

12/4/2018

J1110.04

CLIENT

TEST RESULTS - AIRBORNE SOUND TRANSMISSION LOSS GRAPH

TEST DATE

Receive Temp. 18.9°C (66°F)

TECHNICIAN CRS

Source Temp.

Receive Humidity

10.98 m²SPECIMEN AREA

PAC International, LLC

DESCRIPTION

SECTION 11

17.4°C (63.4°F)

DATA FILE NO.

Source Humidity 60%60%

0

10

20

30

40

50

60

70

80

90

100

63

125

250

500

1000

2000

4000

8000

Sou

nd

Tra

nsm

issi

on

Lo

ss (

dB

re:

20

mP

a)

Frequency (Hz)

Airborne Sound Transmission Loss

Specimen TL

Contour Curve




Telephone: 717-764-4129

York, PA 17406


717-764-7700


Date: 02/12/19

130 Derry Court

Facsimile:

0.3

0.3

0.24

1.6

1.3

1.3

0.8

1.0

1.7

0.5

0.7

0.6

Notes: Receive Room levels less than 5 dB above the Background levels are highlighted in yellow.

NORMALIZED IMPACT SPL

(dB)

95%

CONFIDENCE

LIMIT

-

(Impact Insulation Class) Sum of Deficiencies 25

8 0.6

24.6 -8 0.5

18.6 -6 0.4

14.8 -5 0.3

12.5 -

10.8 0

2

9.8 0

14

6

4

0

8.0 1

7.8 021 0.5

7.7 15

16

7.7 123 0.5

7.6 021 0.6

021 0.8

8.7 00.920

8.1

2

10.8 00.8

0

11.1

25

28

23

11.2

7

10.9 4

-

12.3 8

42

34

33

30

-48 3.1

30.2 -56 2.6

Minimum Temp. 18.7°C (65.6°F)

OF

m² DEFICIENCIES

61% Min. Humidity

IIC Rating 86

24.610000 6.4

8000 6.1

6300 5.7

4000 5.1

3150 5.8

630 21.6

2500 7.0

2000 11.8

1600 12.4

80 39.6

200 21.6

125 30.9

160 25.3

100 30.5

10.98 m² Maximum Temp.

16.6

60%

ABSORPTIONNUMBER

26.5

CRS

12.3






Panel

SECTION 12TEST RESULTS - IMPACT SOUND TRANSMISSION

DESCRIPTION

TECHNICIAN

48.8

46.8

SPL

500 22.9

(Hz)

Max. Humidity

50

TEST DATE 12/4/2018

(dB)

DATA FILE NO. J1110.04

CLIENT PAC International, LLC

63

400 19.8

315

250 28.2

8.9

1250

23.4

18.1

1000 21.4

19.2°C (66.6°F)SPECIMEN AREA

FREQBACKGROUND

5000 5.2

800 21.8




Telephone: 717-764-4129

York, PA 17406


717-764-7700


Date: 02/12/19

130 Derry Court

Facsimile:

Min. Humidity 60%






Panel

10.98 m² Maximum Temp. 19.2°C (66.6°F) Minimum Temp.

TECHNICIAN CRS Max. Humidity 61%

CLIENT PAC International, LLC

DESCRIPTION

SPECIMEN AREA 18.7°C (65.6°F)

SECTION 13TEST RESULTS - IMPACT SOUND TRANSMISSION GRAPH

TEST DATE 12/4/2018

DATA FILE NO. J1110.04

10

20

30

40

50

60

70

80

90

100

1100

10

20

30

40

50

60

70

80

90

100

63

125

250

500

1000

2000

4000

8000

Imp

act

Insu

lati

on

Cla

ss (

IIC

)

Sou

nd

Pre

ssu

re L

eve

l (d

B r

e: 2

0 m

Pa)

Frequency (Hz)

Impact Sound Transmission

Normalized Impact SPL

Contour Curve




Telephone: 717-764-4129

York, PA 17406


717-764-7700


Date: 02/12/19

130 Derry Court

Facsimile:

PHOTOGRAPHSSECTION 14

Photo No. 1

Photo No. 2

Source Room View of Test Specimen Installation

Receive Room View of Test Specimen Installation




Telephone: 717-764-4129

York, PA 17406


717-764-7700


Date: 02/12/19

130 Derry Court

Facsimile:

Original Report Issue

SECTION 15REVISION LOG

REVISION #

R0 02/12/19

PAGES

N/A

DESCRIPTIONDATE




pac international, llc acoustical performance test …

Documents