FEBRUARY 2020

Matex Net Private Limited

Special Assets Division

Santhosh KP – 89398 05544

santhoshkp@matexnet.com

Packaging and Moulding

Packaging and Moulding Manufacturing Company

Overview

Sale of COMPANY 1, COMPANY 2 and COMPANY 3

Sector: Packaging and Moulding

Industry: Manufacturing

Looking for (Transaction type): Complete Exit

Location: GIDC Mansa, Gujarat

Establishment year: 1989/ 1995/2010

COMPANY -1

Business Details:

The unit started and incorporated as Private Limited Company in the year 1989.

Since 1990, the company is a manufacturer of a wide range of Rigid plastic

packaging and industrial products range such as Bottles, Vials, Jars, Jerry Cans, PET

Preforms, Caps and Closures. The products are marketed and sold directly to actual

users and consumer industries.

The company is well equipped with a fleet of machines like Injection Moulding, Blow

Moulding, Screen Printing, Ancillaries like Air Compressor, Scrap Grinder, Mould

Tools, Water Pumps , Cooling Towers, Mold chiller, Water Conditioner, Ratio

Hopper loader, Masterbatch Doser, injection Molds, Blow molds etc. The company

provides customised solutions and has developed a large corporate clientele from

Pharmaceuticals, FMCG, Chemical Sectors, etc.

The manufacturing plant is located at GIDC Estate, about 22 km from

Gandhinagar, the capital city of Gujarat. It is 50 km from Ahmedabad, within 70 km

range of upcoming Auto and Plastic Park at Sanand and Maruti Suzuki Plant

respectively.

The company has a well-experienced team. There is a huge growth potential in

future as the company is being operated for 30 years, and strategically

established the best Goodwill and Network in the market.

The company is looking to handover its premises and business operations in

as it is condition through sale as a whole, Including all assets, land , building,

machineries, mold, etc. , with ZERO DEBT AND ZERO LIABILITIES, NO LIEN OR

ENCUMBERANCES.

Factory Building: ( corner plot, 2 sides road, 4 sides open)

Land & Building:

Land Area (and Open Area for Further xpansion)

1184 Sq.Mt. / 1416 Sq.Yd. / 12745 Sq.Ft.

Building: RCC Frame Structu e 650 Sq.Mt.

Basement: Ramp Entry from Road Side & Stairs to ground floor 777 Sq.Yd.

Ground Floor: 6997 Sq.Ft.

- Production Area

- Office Rooms

- Security Room

- Electrical Control Pa el

- Air Compressor Room

- Workers’ Staff Room

- Sanitary Area

- Compound Walls

- Plantation in open margin area all 4 sides

Power Sanctioned and Connected for LTMD Category 125 HP

Facilities Water Supply Telephone Connection

GREEN BELT ADDITIONAL open land area with overhead high- tension power line at backsi e.

250 Sq.Mt. / 299 Sq.Yd. / 2691 Sq.Ft.

Machinery Installed:

“CMP” Extrusion blow moulding 5 LTRS CAPACITY with Continuous Extruder

drive DC motor, Parison control, top & bottom / angular Blowing attachment ,

Parison stretching attachment, digital control panel, Hydraulic mould

clamping,Festo pneumatics. Well maintained and refurbished periodically,

RUNNING CONDITION IN production. Large stock of blow moulds 1ltr, 2 ltr, 3ltrs,

3.5 ltrs , 5 ltrs jerry cans various designs and shapes. (working condition fully

refurbished HYDRAULICS, screw , DC motor, electronics instruments controllers,

switchgear, PNEUMATICS ETC). , “PRASAD KOCH” make MATERIAL RATIO HOPPER

LOADER, MASTERBATCH DOSER . BLOW MOLDS – 25 NOS.

Injection moulding Machine 50T capacity , GOLDCOIN ( POLYMECHPLAST ) FULLY

AUTOMATIC Screw type Injection moulding machine , DIGITAL CONTROLS, with a

large stock of moulds for caps, closures , containers, etc. WORKING CONDITION.,

WITH TEMPERATURE CONTROLLER FOR HOT MANIFOLD RUNNER MOLDS.

MULTICAVITY INJECTION MOLDS COLD RUNNER - 35 MOLDS

“Ranasons” Extrusion blow moulding 1 LTRS CAPCITY , double station , with

Continuous Extruder drive AC motor, Top Blowing attachment digital control panel,

Pneumatic mould clamping, , pneumatics. Currently shut down for refurbishing

pneumatics, and panel rewiring.

Ancillaries like Air compressor, Cooling Towers, Pumps, Mould chiller, scrap

grinder, hopper loader, hopper dryer, hoist , MANUAL Flat screen printing

equipment, etc. accessories, tools and inventory of raw materials and finished

products.

PET preforms Injection moulding Machine 110T capacity, GOLDCOIN

(POLYMECHPLAST) FULLY AUTOMATIC Screw type Injection moulding machine,

Vertical toggle, Microprocessor control, and auto lubrication with a large stock of

Moulds for PET preforms. (Currently down for refurbishing screw barrel and panel

rewiring) with “Prasad” Hot air drier, Hopper loader, Hoist, etc. MULTICAVITY PET

PREFORMS MOLDS WITH HOT MANIFOLDS – 6 NOS

Two nos. VERTICAL SCREW TYPE FULLY AUTOMATIC INJECTION MOLDING

MACHINES, WITH DIGITAL CONTROLS, HYDRAULICS, TOGGLE TYPE – 20 tons

capacity, 30 gms shot weight.

MULTICAVITY INJECTION MOLDS: – 35 NOS.

Products:

• The Company’s product range is rigid packaging plastic productslike bottles, vials, jars, jerrycans, PET bottles and preforms, caps and closures. Products are marketed and sold directly to actual user consumer industries like pharma, food , chemicals , COSMETICS, INKS AND ADHESIVES, LUBRICATING OILS, EDIBLE OILS, etc.

• The Total installed capacity is about 15 MT per month. Ample scope for new products development catering to pharma, medical and food, OILS, CHEMICALS, etc. packaging sectors.

COMPANY – 2

Business Details:

▪ The unit started and incorporated as Private Limited Company in the year 1995. In production , running since 1996 , The company is a manufacturer and exporter of a wide range of plastic packaging and industrial products range such as Rigid Packaging Plastic Products with a Large Fleet Of HDPE, PP, PET Bottle and Jar Blow Moulds with Extra Neck and Bottom Inserts, Changeable Pieces etc., Preform Holders For Various Neck Sizes, Spares: Bottles and Jars for Water, Juice, Edible and Lube Oils, Pharma, Cosmetics, Food, Spices Etc.

▪ The company is well equipped with a fleet of machines like Extrusion Blow moulding , PET PREFORM stretch blow moulding, Ancillaries like Air compressor, Cooling Tower, Pumps, scrap grinder, accessories, tools and inventory of raw materials and finished products. The company is providing customised solutions, and has developed a largely corporate clientele from Pharmaceuticals, FMCG, Chemical Sectors, etc.

▪ The manufacturing plant is located at GIDC Estate Sector-28, Gandhinagar, the capital city of Gujarat. It is 20 km from Ahmedabad Airport, Within 50 km range of upcoming Auto and Plastic Park at Sanand and Maruti Suzuki Plant.

▪ The company has a well-experienced team. There is a huge growth potential in future as the company has spare production capacities and infrastructure for expansion, and strategically established the best Goodwill and Network in the market. The company is looking to handover its premises and business operations in as it is condition through sale othe COMPANY , INCLUDING ALL ASSETS, LAND, BUILDING, PLANT AND MACHINERY AND MOLDS, VEHICLES etc. as a whole, WITH ZERO DEBT, ZERO LIABILITIES

Land & Building: Land Area (2 plots of 225 sq.mt. with adjoining common walls)

450 Sq.Mt. / 538 Sq.Yd. / 4844 Sq.Ft.

Building: RCC Frame Structure Ground Floor: - Production Area - Fully Furnished Office Rooms with communication and computer systems - CCTV Security Room - Sanitary Block - Compound Walls - Pantry Room First Floor: - Air Compressor Room - Workers’ Staff Room

600 Sq.Mt. 718 Sq.Yd. 6458 Sq.Ft.

2 Services Power Sanctioned and Connected for LTMD Category

65 HP & 25 HP

Facilities Water Supply, Telephone Connection, CCTV security online

Machinery Installed:

“CMP” EXTRUSION BLOW MOULDING 1 LTR CAPACITY, DOUBLE STATION, MICROPPOROCESSOR with Continuous Extruder drive DC motor, top & bottom/ angular Blowing attachment Hydraulic mould clamping, Festo pneumatics. Well-maintained and refurbished periodically running Production. Large stock of blow moulds 50ml to 1LTR, various designs and shapes for diverse applications.

“ UMS” EXTRUSION BLOW MOLDING 200ML, SINGLE STATION, PLC

MICROP PROCESSOR with Continuous Extruder drive DC motor, top Blowing

attachment, Fully Pneumatic, Festo pneumatics. Well-maintained and

refurbished periodically running production. Large stock of blow moulds 5ml to

200ml various designs and shapes.

“SHYAM” SEMI AUTOMATIC (MANUAL PREFORM LOADING AND MANUAL BOTTLE REMOVAL PET PREFORM STRETCH BLOW MOULDING MACHINE, 5 LTRS CAPCITY, with INFRARED PREFORM HEATER CONVEYOR, HYDRAULIC Mould Clamping, Festo pneumatics, HIGH PRESSURE (30 kg/sq.cm.) Blowing (IMPORTED LUCIPHER VALVE), with 20 HP ELGI HIGH PRESSURE COMPRESSOR (THPC 1500) and LOW PRESSURE COMPRESSOR ELGI TC1000 (10 KG/SQ.CM).

HEAT TRANSFER PRINTING / HOT FOIL STAMPING MACHINE : HEAT TRANSFER PRINTING / HOT FOIL STAMPING ON PLASTIC BOTTLES, CAPS ETC. HOT FOIL STAMPING ON CAPS, CLOSURES ETC.

PRODUCTS:

• The Company’s product range is Rigid Packaging Plastic products HDPE, PP, PET, LDPE bottles, Vials, Jars, Jerrycans, PET bottles. Products are marketed and sold directly to actual user consumer industries like pharma, food, chemicals etc.

• The Total installed capacity is about 15 MT per month (2 SHIFTS WORKING). Ample scope for new products development catering to pharma, medical and food etc. packaging sectors.

1

COMPANY – 3

Business Details:

▪ The unit started and incorporated as Private Proprietorship Firm in the year 2010. The company is working as ancillary to Unit-1 (Company-1) and Unit-2 (Company-2), carrying out Job Work Production of the items of Unit-1 (Company-1) and Unit-2 (Company-2). MACHNERIES SHOWN ARE PROPERTY OF CLASIC BLOWTECHNIK AND ANGEL PACKAGING PVT LTD

▪ The manufacturing plant is located at GIDC Estate Sector-25, Gandhinagar, The Capital City of Gujarat. It is 20 kms from Ahmedabad Airport.

▪ The company has a well-experienced team. There is a huge growth potential in future as the company is being operated for 09 years, and strategically established the best Goodwill and Network in the market. The company is looking to handover its premises and business operations in as it is condition through sale as a whole, including all assets, land and building, machinery, molds etc. WITH ZERO DEBT, ZERO LIABILITY.

▪ Unit in production of Rigid Plastic Packaging and Industrial products since 2010 continuous, with a fleet of Machines. Ample scope for Building expansion on ground floor, 1st floor, 2nd floor – FSI=2. Electrical installation, Main Distribution Panel suitable to load 100 HP.

2

Land & Building :

Land Area (GIDC allotted land 1997)

500 Sq.Mt. / 598 Sq.Yd. / 5382 Sq.Ft.

Building: RCC Frame Structure (Construction 2002) Ground Floor: - Production Area with Mezzanine Floor - Air Conditioned Office unit approx. 400 Sq.Ft. with communication and computer systems - CCTV Security Room - Sanitary Block - Compound Walls

150 Sq.Mt. 179 Sq.Yd. 1615 Sq.Ft. And Plinth Level Construction 100 Sq.Mt. 120 Sq.Yd. 1076 Sq.Ft.

Power Sanctioned and Connected for LTMD Category 65 HP

Facilities Water Supply Telephone Connection, Gate, cctv SECURITY ONLINE

Machinery Installed: 1. Imported (Chinese) injection Blow Moulding (IBM) machine, latest technology to produce fully finished, fully automatic plant for production of HDPE, PP LDPE bottles for pharma under clean conditions. MICROPPOROCESSOR with Hydraulic mouldn clamping, Festo pneumatics production. Well-maintained and refurbished periodically running Large stock of Imported Multi-cavity Injection blow moulds 5ml to 100ml for sterile / injectable pharmaceuticals.

Production capacity: 10ml - 30ml : 1500 bottles per hour : 50ml : 1400 bottles per hour : 100ml : 750 bottles/hour. (18-22 kgs/hour production capacity PP material.

3

2. Imported (UNUSED) reputed Chinese company, 1.5LTR max capacity, fully automatic PET performs stretch blow Moulding machine with pneumatic system, Automatic Preform loader for 28mm neck performs, blow molds – 2nos single cavity , production capcity : 900-1000 bottle per hour , reputed European / Japanese Components.

4

3. Imported (UNUSED) reputed Chinese company, 5LTR max capacity , fully automatic PET performs stretch blow Moulding machine with pneumatic system, Automatic Preform loader for 48mm neck performs, blow moulds – 1 no., single caity 5 ltrs Jar. Production Capacity: 600-700 Jars per hour, reputed European / Japanese Components. High Pressure compressor, Low pressure Compressors. MOULD CHILLER, tools, spares, ancillaries, hopper loader, Pumps, Scrap Grinder, etc. Electrical Installation.

5

Products: